Copper Stimulation of Tetrahydrocannabinol and Cannabidiol Production in Hemp (Cannabis sativa L.) Is Copper-Type, Dose, and Cultivar Dependent.

Copper (Cu) is an element widely used as a pesticide for the control of plant diseases. Cu is also known to influence a range of plant secondary metabolisms. However, it is not known whether Cu influences the levels of the major metabolites in hemp (Cannabis sativa L.), tetrahydrocannabinol (THC) and cannabidiol (CBD). This study investigated the impact of Cu on the levels of these cannabinoids in two hemp cultivars, Wife and Merlot, under field conditions, as a function of harvest time (August-September), Cu type (nano, bulk, or ionic), and dose (50, 100, and 500 ppm). In Wife, Cu caused significant temporal increases in THC and CBD production during plant growth, reaching increases of 33% and 31% for THC and 51% and 16.5% for CBD by harvests 3 and 4, respectively. CuO nanoparticles at 50 and 100 ppm significantly increased THC and CBD levels, compared to the control, respectively, by 18% and 27% for THC and 19.9% and 33.6% for CBD. These nanospecific increases coincided with significantly more Cu in the inflorescences (buds) than in the control and bulk CuO treatments. Contrarily, no temporal induction of the cannabinoids by Cu was noticed in Merlot, suggesting a cultivar-specific response to Cu. However, overall, in Merlot, Cu ions, but not particulate Cu, induced THC and CBD levels by 27% and 36%, respectively, compared to the control. Collectively, our findings provide information with contrasting implications in the production of these cannabinoids, where, dependent on the cultivar, metabolite levels may rise above the 0.3% regulatory threshold for THC but to a more profitable level for CBD. Further investigations with a wider range of hemp cultivars, CuO nanoparticle (NP) doses, and harvest times would clarify the significance and broader implications of the findings.

Nanotechnology in agriculture: A solution to global food insecurity in a changing climate?

Although the Green Revolution dramatically increased food production, it led to non- sustainable conventional agricultural practices, with productivity in general declining over the last few decades. Maintaining food security with a world population exceeding 9 billion in 2050, a changing climate, and declining arable land will be exceptionally challenging. In fact, nothing short of a revolution in how we grow, distribute, store, and consume food is needed. In the last ten years, the field of nanotoxicology in plant systems has largely transitioned to one of sustainable nano-enabled applications, with recent discoveries on the use of this advanced technology in agriculture showing tremendous promise. The range of applications is quite extensive, including direct application of nanoscale nutrients for improved plant health, nutrient biofortification, increased photosynthetic output, and greater rates of nitrogen fixation. Other applications include nano-facilitated delivery of both fertilizers and pesticides; nano-enabled delivery of genetic material for gene silencing against viral pathogens and insect pests; and nanoscale sensors to support precision agriculture. Recent efforts have demonstrated that nanoscale strategies increase tolerance to both abiotic and biotic stressors, offering realistic potential to generate climate resilient crops. Considering the efficiency of nanoscale materials, there is a need to make their production more economical, alongside efficient use of incumbent resources such as water and energy. The hallmark of many of these approaches involves much greater impact with far less input of material. However, demonstrations of efficacy at field scale are still insufficient in the literature, and a thorough understanding of mechanisms of action is both necessary and often not evident. Although nanotechnology holds great promise for combating global food insecurity, there are far more ways to do this poorly than safely and effectively. This review summarizes recent work in this space, calling out existing knowledge gaps and suggesting strategies to alleviate those concerns to advance the field of sustainable nano-enabled agriculture.

A comprehensive trial on PFAS remediation: hemp phytoextraction and PFAS degradation in harvested plants.

Per- and polyfluoroalkyl substances (PFAS) are a class of recalcitrant, highly toxic contaminants, with limited remediation options. Phytoremediation - removal of contaminants using plants - is an inexpensive, community-friendly strategy for reducing PFAS concentrations and exposures. This project is a collaboration between the Mi'kmaq Nation, Upland Grassroots, and researchers at several institutions who conducted phytoremediation field trials using hemp to remove PFAS from soil at the former Loring Air Force base, which has now been returned to the Mi'kmaq Nation. PFAS were analyzed in paired hemp and soil samples using targeted and non-targeted analytical approaches. Additionally, we used hydrothermal liquefaction (HTL) to degrade PFAS in the harvested hemp tissue. We identified 28 PFAS in soil and found hemp uptake of 10 of these PFAS. Consistent with previous studies, hemp exhibited greater bioconcentration for carboxylic acids compared to sulfonic acids, and for shorter-chain compounds compared to longer-chain. In total, approximately 1.4 mg of PFAS was removed from the soil via uptake into hemp stems and leaves, with an approximate maximum of 2% PFAS removed from soil in the most successful area. Degradation of PFAS by HTL was nearly 100% for carboxylic acids, but a portion of sulfonic acids remained. HTL also decreased precursor PFAS and extractable organic fluorine. In conclusion, while hemp phytoremediation does not currently offer a comprehensive solution for PFAS-contaminated soil, this project has effectively reduced PFAS levels at the Loring site and underscores the importance of involving community members in research aimed at remediating their lands.

PFAS remediation in soil: An evaluation of carbon-based materials for contaminant sequestration.

The presence of per- and poly-fluoroalkyl substances (PFAS) in soils is a global concern as these emerging contaminants are highly resistant to degradation and cause adverse effects on human and environmental health at very low concentrations. Sequestering PFAS in soils using carbon-based materials is a low-cost and effective strategy to minimize pollutant bioavailability and exposure, and may offer potential long-term remediation of PFAS in the environment. This paper provides a comprehensive evaluation of current insights on sequestration of PFAS in soil using carbon-based sorbents. Hydrophobic effects originating from fluorinated carbon (C-F) backbone "tail" and electrostatic interactions deriving from functional groups on the molecules' "head" are the two driving forces governing PFAS sorption. Consequently, varying C-F chain lengths and polar functional groups significantly alter PFAS availability and leachability. Furthermore, matrix parameters such as soil organic matter, inorganic minerals, and pH significantly impact PFAS sequestration by sorbent amendments. Materials such as activated carbon, biochar, carbon nanotubes, and their composites are the primary C-based materials used for PFAS adsorption. Importantly, modifying the carbon structural and surface chemistry is essential for increasing the active sorption sites and for strengthening interactions with PFAS. This review evaluates current literature, identifies knowledge gaps in current remediation technologies and addresses future strategies on the sequestration of PFAS in contaminated soil using sustainable novel C-based sorbents.

Nanoparticles and biochar with adsorbed plant growth-promoting rhizobacteria alleviate Fusarium wilt damage on tomato and watermelon.

The addition of biochars and nanoparticles with adsorbed Azotobacter vinelandii and Bacillus megaterium alleviated damage from Fusarium infection in both tomato (Solanum lycopersicum) and watermelon (Citrullus lanatus) plants. Tomato and watermelon plants were grown in greenhouse for 28 and 30 days (respectively) and were treated with either nanoparticles (chitosan-coated mesoporous silica or nanoclay) or varying biochars (biochar produced by pyrolysis, gasification and pyrogasification). Treatments with nanoparticles and biochars were applied in two variants - with or without adsorbed plant-growth promoting bacteria (PGPR). Chitosan-coated mesoporous silica nanoparticles with adsorbed bacteria increased chlorophyll content in infected tomato and watermelon plants (1.12 times and 1.63 times, respectively) to a greater extent than nanoclay with adsorbed bacteria (1.10 times and 1.38 times, respectively). However, the impact on other endpoints (viability of plant cells, phosphorus and nitrogen content, as well antioxidative status) was species-specific. In all cases, plants treated with adsorbed bacteria responded better than plants without bacteria. For example, the content of antioxidative compounds in diseased watermelon plants increased nearly 46% upon addition of Aries biochar and by approximately 52% upon addition of Aries biochar with adsorbed bacteria. The overall effect on disease suppression was due to combination of the antifungal effects of both nanoparticles (and biochars) and plant-growth promoting bacteria. These findings suggest that nanoparticles or biochars with adsorbed PGPR could be viewed as a novel and sustainable solution for management of Fusarium wilt.

Biologically synthesized zinc and copper oxide nanoparticles using Cannabis sativa L. enhance soybean (Glycine max) defense against fusarium virguliforme.

In this study, zinc and copper oxide nanoparticles (NPs) were synthesized using hemp (Cannabis sativa L.) leaves (ZnONP-HL and CuONP-HL), and their antifungal potential was assessed against Fusarium virguliforme in soybean (Glycine max L.). Hemp was selected because it is known to contain large quantities of secondary metabolites that can potentially enhance the reactivity of NPs through surface property modification. Synthesizing NPs with biologically derived materials allows to avoid the use of harsh and expensive synthetic reducing and capping agents. The ZnONP-HL and CuONP-HL showed average grain/crystallite size of 13.51 nm and 7.36 nm, respectively. The biologically synthesized NPs compared well with their chemically synthesized counterparts (ZnONP chem, and CuONP chem; 18.75 nm and 10.05 nm, respectively), confirming the stabilizing role of hemp-derived biomolecules. Analysis of the hemp leaf extract and functional groups that were associated with ZnONP-HL and CuONP-HL confirmed the presence of terpenes, flavonoids, and phenolic compounds. Biosynthesized NPs were applied on soybeans as bio-nano-fungicides against F. virguliforme via foliar treatments. ZnONP-HL and CuONP-HL at 200 µg/mL significantly (p < 0.05) increased (∼ 50%) soybean growth, compared to diseased controls. The NPs improved the nutrient (e.g., K, Ca, P) content and enhanced photosynthetic indicators of the plants by 100-200%. A 300% increase in the expression of soybean pathogenesis related GmPR genes encoding antifungal and defense proteins confirmed that the biosynthesized NPs enhanced disease resistance against the fungal phytopathogen. The findings from this study provide novel evidence of systemic suppression of fungal disease by nanobiopesticides, via promoting plant defense mechanisms.

Aureobasidium pullulans from the Fire Blight Biocontrol Product, Blossom Protect, Induces Host Resistance in Apple Flowers.

Fire blight, caused by Erwinia amylovora, is a devastating disease of apple. Blossom Protect, a product that contains Aureobasidium pullulans as the active ingredient, is one of the most effective biological controls of fire blight. It has been postulated that the mode of action of A. pullulans is to compete against and antagonize epiphytic growth of E. amylovora on flowers, but recent studies have found that flowers treated with Blossom Protect harbored similar to or only slightly reduced E. amylovora populations compared with nontreated flowers. In this study, we tested the hypothesis that A. pullulans-mediated biocontrol of fire blight is the result of induced host resistance. We found that PR genes in the systemic acquired resistance pathway, but not genes in the induced systemic resistance pathway, were induced in hypanthial tissue of apple flowers after the Blossom Protect treatment. Additionally, the induction of PR gene expression was coupled with an increase of plant-derived salicylic acid in this tissue. After inoculation with E. amylovora, PR gene expression was suppressed in nontreated flowers, but in flowers pretreated with Blossom Protect, the heightened PR expression offset the immune repression caused by E. amylovora, and prevented infection. Temporal and spatial analysis of PR gene induction showed that induction of PR genes occurred 2 days after the Blossom Protect treatment, and required direct flower-yeast contact. Finally, we observed deterioration of the epidermal layer of the hypanthium in some of the Blossom Protect-treated flowers, suggesting that PR gene induction in flowers may be a result of pathogenesis by A. pullulans.

Engineered Nanoparticles, Natural Nanoclay and Biochar, as Carriers of Plant-Growth Promoting Bacteria.

The potential of biochar and nanoparticles to serve as effective delivery agents for beneficial bacteria to crops was investigated. Application of nanoparticles and biochar as carriers for beneficial bacteria improved not only the amount of nitrogen-fixing and phosphorus-solubilizing bacteria in soil, but also improved chlorophyll content (1.2-1.3 times), cell viability (1.1-1.5 times), and antioxidative properties (1.1-1.4 times) compared to control plants. Treatments also improved content of phosphorus (P) (1.1-1.6 times) and nitrogen (N) (1.1-1.4 times higher) in both tomato and watermelon plants. However, the effect of biochars and nanoparticles were species-specific. For example, chitosan-coated mesoporous silica nanoparticles with adsorbed bacteria increased the phosphorus content in tomato by 1.2 times compared to a 1.1-fold increase when nanoclay with adsorbed bacteria was applied. In watermelon, the situation was reversed: 1.1-fold increase in the case of chitosan-coated mesoporous silica nanoparticles and 1.2 times in case of nanoclay with adsorbed bacteria. Our findings demonstrate that use of nanoparticles and biochar as carriers for beneficial bacteria significantly improved plant growth and health. These findings are useful for design and synthesis of novel and sustainable biofertilizer formulations.

Phytosynthesis of Zinc Oxide Nanoparticles Using Ceratonia siliqua L. and Evidence of Antimicrobial Activity.

Carob (Ceratonia siliqua L.) is a tree crop cultivated extensively in the eastern Mediterranean regions but that has become naturalized in other regions as well. The present study focused on the green synthesis of zinc oxide nanoparticles (ZnONPs) from Carob and their evaluation for antimicrobial activity in bacteria and fungi. The synthesized ZnONPs showed strong antibacterial activity against Staphylococcus aureus ATCC 25 923 (92%). The NPs inhibited the growth of pathogenic yeast strains, including Candida albicans ATCC90028, Candida krusei ATCC6258, and Candida neoformans ATCC14116, by 90%, 91%, and 82%, respectively, compared to the control. Fungal inhibition zones with the ZnONPs were 88.67% and 90%, respectively, larger for Aspergillus flavus 15UA005 and Aspergillus fumigatus ATCC204305, compared to control fungal growth. This study provides novel information relevant for plant-based development of new and potentially antimicrobial ZnONPs based on extracts. In particular, the development and application of phytogenic nanoparticles enhances the biocompatibility of nano-scale materials, thereby allowing to tune effects to prevent adverse outcomes in non-target biological systems.

Tomato Fruit Nutritional Quality Is Altered by the Foliar Application of Various Metal Oxide Nanomaterials.

Carbohydrates and phytonutrients play important roles in tomato fruit's nutritional quality. In the current study, Fe3O4, MnFe2O4, ZnFe2O4, Zn0.5Mn0.5Fe2O4, Mn3O4, and ZnO nanomaterials (NMs) were synthesized, characterized, and applied at 250 mg/L to tomato plants via foliar application to investigate their effects on the nutritional quality of tomato fruits. The plant growth cycle was conducted for a total of 135 days in a greenhouse and the tomato fruits were harvested as they ripened. The lycopene content was initially reduced at 0 stored days by MnFe2O4, ZnFe2O4, and Zn0.5Mn0.5Fe2O4; however, after a 15-day storage, there was no statistical difference between the treatments and the control. Moreover, the ß-carotene content was also reduced by Zn0.5Mn0.5Fe2O4, Mn3O4, and ZnO. The effects of the Mn3O4 and ZnO carried over and inhibited the ß-carotene after the fruit was stored. However, the total phenolic compounds were increased by ZnFe2O4, Zn0.5Mn0.5Fe2O4, and ZnO after 15 days of storage. Additionally, the sugar content in the fruit was enhanced by 118% and 111% when plants were exposed to Mn3O4 and ZnO, respectively. This study demonstrates both beneficial and detrimental effects of various NMs on tomato fruit quality and highlights the need for caution in such nanoscale applications during crop growth.

Simultaneous exposure of wheat (Triticum aestivum L.) to CuO and S nanoparticles alleviates toxicity by reducing Cu accumulation and modulating antioxidant response.

Widespread use of metal-based nanoparticles (NPs) may result in the increased accumulation of metals in agricultural soil, which could affect crop productivity and contaminate the food-chain. The effect of sulfur nanoparticles (S NPs, 200 mg/L) co-exposure on the toxicity of CuO nanoparticles (CuO NPs, 25 and 50 mg/L) to wheat seedlings was investigated in a hydroponic system. CuO NPs exposure significantly inhibited the growth of wheat seedlings, causing 43.6% and 54.1% decreases in the fresh biomass of plants and 82.8% and 83.1% decrease in the total chlorophyll contents at 25 and 50 mg/L (CuONP25 and CuONP50), respectively, as compared to controls. CuO NPs exposure at both concentrations increased the malondialdehyde (MDA) content in shoot and root tissues by 66.4-67.9% and 47.7-48.8%, respectively. Further, CuO NPs exposure elevated the activities POD, SOD, and CAT by 2.19-2.27, 5.82-6.09, and 1.44-1.95 times in roots, and by 45.2-67.8%, 86.7-154.5%, and 22.5-56.1% in shoot, respectively, in comparison to control. The addition of S NPs alone increased wheat biomass by 11.0% and total chlorophyll contents by 4.4%, compared to controls. Further, simultaneous exposure to S NPs (200 mg/L) and CuO NPs (25 or 50 mg/L) alleviated the CuO NPs toxicity; wheat biomass was 47.8% and 37.7% higher in CuONP25 + SNP and CuONP50 + SNP treatments, respectively, as compared to CuO NPs alone treated plants. Co-exposed plants showed reduced levels of total reactive oxygen species (ROS), O2·- and H2O2. Additionally, S NPs exposure reduced Cu uptake and accumulation in both root and shoot tissue by 32.2-54.4% and 38.3-57.5%, respectively. In summary, S NPs alleviated CuO NPs toxicity to wheat seedlings, most likely by reducing Cu bioavailability and accumulation of Cu in plant tissues, and also altered S nutrition and the modulation of antioxidant response in plants. These results showed that S NPs application has the potential to alleviate CuO NP toxicity and increase wheat productivity affected by metals toxicity.

Enhancing Agrichemical Delivery and Plant Development with Biopolymer-Based Stimuli Responsive Core-Shell Nanostructures.

The inefficient delivery of agrichemicals in agrifood systems is among the leading cause of serious negative planetary and public health impacts. Such inefficiency is mainly attributed to the inability to deliver the agrichemicals at the right place (target), right time, and right dose. In this study, scalable, biodegradable, sustainable, biopolymer-based multistimuli responsive core-shell nanostructures were developed for smart agrichemical delivery. Three types of responsive core/shell nanostructures incorporated with model agrichemicals (i.e., CuSO4 and NPK fertilizer) were synthesized by coaxial electrospray, and the resulting nanostructures showed spherical morphology with an average diameter about 160 nm. Tunable agrichemical release kinetics were achieved by controlling the surface hydrophobicity of nanostructures. The pH and enzyme responsiveness was also demonstrated by the model analyte release kinetics (up to 7 days) in aqueous solution. Finally, the efficacy of the stimuli responsive nanostructures was evaluated in soil-based greenhouse studies using soybean and wheat in terms of photosynthesis efficacy and linear electron flow (LEF), two important metrics for seedling development and health. Findings confirmed plant specificity; for soybean, the nanostructures resulted in 34.3% higher value of relative chlorophyll content and 41.2% higher value of PS1 centers in photosystem I than the ionic control with equivalent agrichemical concentration. For wheat, the nanostructures resulted in 37.6% higher value of LEF than the ionic agrichemicals applied at 4 times higher concentration, indicating that the responsive core-shell nanostructure is an effective platform to achieve precision agrichemical delivery while minimizing inputs. Moreover, the Zn and Na content in the leaves of 4-week-old soybean seedlings were significantly increased with nanostructure amendment, indicating that the developed nanostructures can potentially be used to modulate the accumulation of other important micronutrients through a potential biofortification strategy.

Nanostructured mesoporous silica materials induce hormesis on chili pepper (Capsicum annuum L.) under greenhouse conditions.

Current agricultural practices for vegetable production are unsustainable, and the use of certain nanomaterials has shown significant potential for either plant growth promotion or defense induction in crop species. The aim of the present work was to evaluate the possible effects of two SBA nano-structured silica materials differing in morphology; SBA-15, with porous structure in parallel and with a highly ordered hexagonal array and SBA-16, with spheric nano-cages located in cubic arrays, as plant growth promoters/eustressors on chili pepper (Capsicum annuum L.) during cultivation under greenhouse conditions. The study was carried out at three foliarly applied concentrations (20, 50 and 100 ppm) of either SBA materials to determine effects on seed germination, seedling growth, plant performance and cold tolerance under greenhouse. Phytotoxicity tests were carried out using higher concentrations (100, 1000 and 200 ppm) applied by dipping or spraying onto chili pepper plants. Deionized water controls were included. The results showed that the SBA materials did not affect seed germination; however, SBA-15 at 50 ppm and 100 ppm applied by imbibition significantly increased seedling height (up to 8-fold) and provided enhanced growth performance in comparison with controls under select treatment regimes. Weekly application of SBA-15 at 20 ppm significantly increased stem diameter and cold tolerance; however, SBA-16 showed significant decreases in plant height (20 ppm biweekly applied) and stem diameter (20, 50 and 100 ppm biweekly applied). The results demonstrate that both SBA materials provided hormetic effects in a dose dependent manner on chili pepper production and protection to cold stress. No phytotoxic response was evident. These findings suggested the nanostructured mesoporous silica have potential as a sustainable amendment strategy to increase crop production under stress-inducing cultivation conditions.

Foliar Application of Copper Oxide Nanoparticles Suppresses Fusarium Wilt Development on Chrysanthemum.

Micronutrients applied as nanoparticles of metal oxides have shown efficacy in vegetable and other crops for improving yield and reducing Fusarium diseases, but their role in ornamental crop management has not been investigated. In 2017, 2018, and 2020, nanoparticles of CuO, Mn2O3, or ZnO were foliarly applied at 500 µg/mL (0.6 mg/plant) to chrysanthemum transplants and planted in potting soil noninfested or infested with Fusarium oxysporum f. sp. chrysanthemi. An untreated control and a commercial fungicide, Fludioxonil, was also included. Chrysanthemums treated with nanoscale CuO had a 55, 30, and 32% reduction in disease severity ratings compared to untreated plants in 2017, 2018, and 2020, respectively. Specifically, the average dry biomass for the three years was reduced 22% by disease, but treatment with nanoscale CuO led to a 23% increase when compared to controls. Similar trends with plant height were observed. Horticultural quality was improved 28% with nano CuO and was equal to the fungicide. Nanoscale Mn2O3 and the fungicide did not consistently reduce disease ratings or increase dry biomass each year. Nanoscale ZnO was ineffective. Nanoscale CuO-treated plants had 24 to 48% more Cu/g tissue than controls (P < 0.001). These findings agree with past reports on food crops where single applications of nanoscale CuO improved plant health, growth, and yield and could offer significant impacts for managing plant diseases on ornamentals.

What's under the Christmas Tree? A Soil Sulfur Amendment Lowers Soil pH and Alters Fir Tree Rhizosphere Bacterial and Eukaryotic Communities, Their Interactions, and Functional Traits.

In this study, we describe the legacy effects of a soil sulfur amendment experiment performed 6 years prior and the resulting alterations to the rhizosphere communities of fir trees on a Christmas tree plantation. The pH of bulk soil was ∼1.4 pH units lower than that of untreated soils and was associated with reduced Ca, Mg, and organic matter contents. Similarly, root chemistry differed due to the treatment, with roots in sulfur-amended soils showing significantly higher Al, Mn, and Zn contents and reduced levels of B and Ca. 16S rRNA and 18S rRNA gene sequencing was pursued to characterize the bacterial/archaeal and eukaryotic communities in the rhizosphere soils. The treatment induced dramatic and significant changes in the microbial populations, with thousands of 16S rRNA gene sequence variants and hundreds of 18S rRNA gene variants being significantly different in relative abundances between the treatments. Additionally, co-occurrence networks showed that bacterial and eukaryotic interactions, network topology, and hub taxa were significantly different when constructed from the control and treated soil 16S and 18S rRNA gene amplicon libraries. Metagenome sequencing identified several genes related to transport proteins that differentiated the functional potentials of the communities between treatments, pointing to physiological adaptations in the microbial communities for living at altered pH. These data show that a legacy of soil acidification increased the heterogeneity of the soil communities as well as decreasing taxon connections, pointing to a state of ecosystem instability that has potentially persisted for 6 years. IMPORTANCE We used sulfur incorporation to investigate the legacy effects of lowered soil pH on the bacterial and eukaryotic populations in the rhizosphere of Christmas trees. Acidification of the soils drove alterations of fir tree root chemistry and large shifts in the taxonomic and functional compositions of the communities. These data demonstrate that soil pH influences are manifest across all organisms inhabiting the soil, from the host plant to the microorganisms inhabiting the rhizosphere soils. Thus, this study highlights the long-lasting influence of altering soil pH on soil and plant health as well as the status of the microbiome.

Role of Nanoscale Hydroxyapatite in Disease Suppression of Fusarium-Infected Tomato.

The present study investigated the mechanisms by which large- and small-sized nanoscale hydroxyapatite (nHA) suppressed Fusarium-induced wilt disease in tomato. Both nHA sizes at 9.3 mg/L (low) and 46.5 mg/L (high dose) phosphorus (P) were foliar-sprayed on Fusarium-infected tomato leaf surfaces three times. Diseased shoot mass was increased by 40% upon exposure to the low dose of large-sized nHA compared to disease controls. Exposure to both nHA sizes significantly elevated phenylalanine ammonialyase activity and total phenolic content in Fusarium-infected shoots by 30-80% and 40-68%, respectively. Shoot salicylic acid content was also increased by 10-45%, suggesting the potential relationship between antioxidant and phytohormone pathways in nHA-promoted defense against fungal infection. Exposure to the high dose of both nHA sizes increased the root P content by 27-46%. A constrained analysis of principal coordinates suggests that high dose of both nHA sizes significantly altered the fatty acid profile in diseased tomato. Particularly, the diseased root C18:3 content was increased by 28-31% in the large-sized nHA treatments, indicating that nHA remodeled the cell membrane as part of defense against Fusarium infection. Taken together, our findings demonstrate the important role of nHA in promoting disease suppression for the sustainable use of nHA in nanoenabled agriculture.

Graphitic Carbon Nitride (C3N4) Reduces Cadmium and Arsenic Phytotoxicity and Accumulation in Rice (Oryza sativa L.).

The present study investigated the role of graphitic carbon nitride (C3N4) in alleviating cadmium (Cd)- and arsenic (As)-induced phytotoxicity to rice (Oryza sativa L.). A high-temperature pyrolysis was used to synthesize the C3N4, which was characterized by transmission electron microscopy, Fourier-transform infrared spectroscopy, and dynamic light scattering. Rice seedlings were exposed to C3N4 at 50 and 250 mg/L in half-strength Hoagland's solution amended with or without 10 mg/L Cd or As for 14 days. Both Cd and As alone resulted in 26-38% and 49-56% decreases in rice root and shoot biomass, respectively. Exposure to 250 mg/L C3N4 alone increased the root and shoot fresh biomass by 17.5% and 25.9%, respectively. Upon coexposure, Cd + C3N4 and As + C3N4 alleviated the heavy metal-induced phytotoxicity and increased the fresh weight by 26-38% and 49-56%, respectively. Further, the addition of C3N4 decreased Cd and As accumulation in the roots by 32% and 25%, respectively, whereas the metal contents in the shoots were 30% lower in the presence of C3N4. Both As and Cd also significantly altered the macronutrient (K, P, Ca, S, and Mg) and micronutrient (Cu, Fe, Zn, and Mn) contents in rice, but these alterations were not evident in plants coexposed to C3N4. Random amplified polymorphic DNA analysis suggests that Cd significantly altered the genomic DNA of rice roots, while no difference was found in shoots. The presence of C3N4 controlled Cd and As uptake in rice by regulating transport-related genes. For example, the relative expression of the Cd transporter OsIRT1 in roots was upregulated by approximately threefold with metal exposure, but C3N4 coamendment lowered the expression. Similar results were evident in the expression of the As transporter OsNIP1;1 in roots. Overall, these findings facilitate the understanding of the underlying mechanisms by which carbon-based nanomaterials alleviate contaminant-induced phyto- and genotoxicity and may provide a new strategy for the reduction of heavy metal contamination in agriculture.

Silica Nanoparticle Dissolution Rate Controls the Suppression of Fusarium Wilt of Watermelon (Citrullus lanatus).

Projected population increases over the next 30 years have elevated the need to develop novel agricultural technologies to dramatically increase crop yield, particularly under conditions of high pathogen pressure. In this study, silica nanoparticles (NPs) with tunable dissolution rates were synthesized and applied to watermelon (Citrullus lanatus) to enhance plant growth while mitigating development of the Fusarium wilt disease caused by Fusarium oxysporum f. sp. niveum. The hydrolysis rates of the silica particles were controlled by the degree of condensation or the catalytic activity of aminosilane. The results demonstrate that the plants treated with fast dissolving NPs maintained or increased biomass whereas the particle-free plants had a 34% decrease in biomass. Further, higher silicon concentrations were measured in root parts when the plants were treated with fast dissolving NPs, indicating effective silicic acid delivery. In a follow-up field study over 2.5 months, the fast dissolving NP treatment enhanced fruit yield by 81.5% in comparison to untreated plants. These findings indicate that the colloidal behavior of designed nanoparticles can be critical to nanoparticle-plant interactions, leading to disease suppression and plant health as part of a novel strategy for nanoenabled agriculture.

Soil-Weathered CuO Nanoparticles Compromise Foliar Health and Pigment Production in Spinach (Spinacia oleracea).

In this study, spinach plants exposed to fresh/unweathered (UW) or weathered (W) copper compounds in soil were analyzed for growth and nutritional composition. Plants were exposed for 45 days to freshly prepared or soil-aged (35 days) nanoparticulate CuO (nCuO), bulk-scale CuO (bCuO), or CuSO4 at 0 (control), 400, 400, and 40 mg/kg of soil, respectively. Foliar health, gas exchange, pigment content (chlorophyll and carotenoid), catalase and ascorbate peroxidase enzymes, gene expression, and Cu bioaccumulation were evaluated along with SEM imagery for select samples. Foliar biomass was higher in UW control (84%) and in UW ionic treatment (87%), compared to the corresponding W treatments (p ≤ 0.1). Root catalase activity was increased by 110% in UW bCuO treatment as compared to the W counterpart; the value for the W ionic treatment was increased by 2167% compared to the UW counterpart (p ≤ 0.05). At 20 days post-transplantation, W nCuO-exposed plants had ∼56% lower carotenoid content compared to both W control and the UW counterpart (p ≤ 0.05). The findings indicate that over the full life cycle of spinach plant the weathering process significantly deteriorates leaf pigment production under CuO exposure in particular and foliar health in general.