Tensile and compressive behaviour of the bovine periodontal ligament.

The mechanical response of the bovine periodontal ligament (PDL) subjected to uniaxial tension and compression is reported. Several sections normal to the longitudinal axis of bovine incisors and molars were extracted from different depths. Specimens with dimensions 10 x 5 x 2 mm including dentine, PDL and alveolar bone were obtained from these sections. Scanning electron microscopy suggested a strong similarity between the bovine PDL and the human PDL microstructure described in the literature. The prepared specimens were tested in a custom made uniaxial testing machine. They were clamped on their bone and dentine extremities and immersed in a saline solution at 37 degrees C. Stress-strain curves indicated that the PDL is characterized by a non-linear and time-dependent mechanical behaviour with the typical features of collagenous soft tissues. The curves exhibited hysteresis and preconditioning effects. The mechanical parameters evaluated in tension were maximum tangent modulus, strength, maximizer strain and strain energy density. For the molars, all these parameters increased with depth except for the apical region. For the incisors, all parameters increased with depth except ultimate strain which decreased. It was assumed that collagen fibre density and orientation were responsible for these findings.

How is the indentation modulus of bone tissue related to its macroscopic elastic response? A validation study.

This work consists of the validation of a novel approach to estimate the local anisotropic elastic constants of the bone extracellular matrix using nanoindentation. For this purpose, nanoindentation on two planes of material symmetry were analyzed and the resulting longitudinal elastic moduli compared to the moduli measured with a macroscopic tensile test. A combined lathe and tensile system was designed that allows machining and testing of cylindrical microspecimens of approximately 4mm in length and 300 microm in diameter. Three bovine specimens were tested in tension and their outer geometry and porosity assessed by synchrotron radiation microtomography. Based on the results of the traction test and the precise outer geometry, an apparent longitudinal Young's modulus was calculated. Results between 20.3 and 27.6 GPa were found that match with previously reported values for bovine compact bone. The same specimens were then characterized by nanoindentation on a transverse and longitudinal plane. A longitudinal Young's modulus for the bone matrix was then derived using the numerical scheme proposed by Swadener and Pharr and the fabric-elasticity relationship by Zysset and Curnier. Based on the matrix modulus and a power law effective volume fraction, an apparent longitudinal Young's modulus was predicted for each microspecimen. This alternative approach provided values between 19.9 and 30.0 GPa, demonstrating differences between 2% and 13% to the values provided by the initial tensile test. This study therefore raises confidence in our nanoindentation protocol of the bone extracellular matrix and supports the underlying hypotheses used to extract the anisotropic elastic constants.

Hydroxyapatite cement scaffolds with controlled macroporosity: fabrication protocol and mechanical properties.

Precipitated hydroxyapatite cement scaffolds with macroporosity of controlled size and shape were successfully built using a solid freeform fabrication process. The negative macroporosity was designed using CAD software and built with an inkjet machine. A slip casting process using a plaster mold was used to precipitate the cement and manufacture samples for mechanical testing. The negative macroporosity was then extracted from the samples using a thermal process. Compression, tension and torsion tests were completed successfully on the precipitated hydroxyapatite cement samples in moist condition. Elastic and strength properties were measured for these three loading cases and compared to the plain hydroxyapatite cement properties reported in a previous study. Homogenization theory was applied to estimate the elastic properties of the manufactured scaffolds. A good correlation was obtained between the experimental data and the theory.

Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions.

Mechanical properties of single lamellae of human compact and trabecular bone tissue were measured with a combined atomic force microscopy (AFM) and nanoindentation technique. This combination allows for both characterization of bone surface topography and indentation of the bone extracellular matrix (ECM) with depths of between 100 and 600 nm. Four bone structural units (BSUs) were tested with 400 indents under dry conditions, and four BSUs with 160 indents were tested in a liquid cell under physiological conditions. A correspondence was established between the optical appearance of bone lamellae and the topography of the polished bone surface. The indentation modulus and hardness of bone ECM were investigated as a function of lamella type and indentation depth under wet and dry conditions. For low depth indents, thick lamellae showed a higher indentation modulus than thin lamellae. With increasing indentation depth, thick lamellae exhibited a significant decrease in indentation modulus and hardness, whereas, for thin lamellae, the effect of indentation depth was much less significant. These trends were similar for dry and physiological conditions and support compositional and/or ultrastructural differences between thick and thin lamellae.