Competitive adsorption of acetaminophen and caffeine onto activated Tingui biochar: characterization, modeling, and mechanisms.

Tingui biochar (TB) activated with potassium hydroxide (TB-KOH) was synthesized in the present study. The adsorption capacity of TB-KOH was evaluated for the removal of acetaminophen and caffeine in monocomponent and bicomponent solutions. As a result, the study of the TB-KOH characterization as well as the adsorption kinetics, isotherm, thermodynamics, and a suggestion of the global adsorption mechanism are presented. TB-KOH was characterized through physical-chemical analysis to understand its surface morphology and how it contributes to the adsorption of these drugs. Furthermore, modelling using advanced statistical physical models was performed to describe how acetaminophen and caffeine molecules are adsorbed in the active sites of TB-KOH. Through the characterizations, it was observed that the activation with KOH contributed to the development of porosity and functional groups (-OH, C-O, and C = O) on the surface of TB. The monocomponent adsorption equilibrium was reached in 90 min with a maximum adsorption capacity of 424.7 and 350.8 mg g-1 for acetaminophen and caffeine, respectively. For the bicomponent solution adsorption, the maximum adsorption capacity was 199.4 and 297.5 mg g-1 for acetaminophen and caffeine, respectively. The isotherm data was best fitted to the Sips model, and the thermodynamic study indicated that acetaminophen removal was endothermic, while caffeine removal was exothermic. The mechanism of adsorption of acetaminophen and caffeine by TB-KOH was described by the involvement of hydrogen bonds and π-π interactions between the surface of TB-KOH and the molecules of the contaminants.

Novel activated carbon from Magonia pubescens bark: characterization and evaluation of adsorption efficiency.

In this work, the synthesis of activated carbon from the bark of the Magonia pubescens (known as Tingui) and its efficiency in the removal of diclofenac sodium through batch adsorption tests and physical-chemical characterizations were investigated. The phytotoxicity of this material was also evaluated through germination and root growth of Lactuca sativa seeds. According to the experimental design performed for the synthesis of Tingui carbon, the optimized temperature and residence time for the production of this adsorbent were 550 °C and 120 min, respectively. The equilibrium time was reached in 600 min and the theoretical model that best fitted the kinetic data was the Elovich model. The BET was the best fit for the adsorption isotherm dataThis indicates that the adsorption process of sodium diclofenac by activated carbon can occur by two different mechanisms, monolayer and/or multilayer adsorption, depending on the conditions employed in the process, such as temperature and adsorbate concentration. The thermodynamic study showed that the process was favourable and spontaneous in the temperature range evaluated. Furthermore, the characterizations showed by TG/DTG and FTIR analyses that the temperature throughout the process had a marked impact on the degradation of the organic constituents of the biomass and the appearance of distinct functional groups that contributed to the adsorption process of diclofenac sodium. Finally, the toxicity tests recognized that this adsorbent does not affect the germination of L. sativa species. Thus, this adsorbent may become a novel and viable option to be used in the removal of sodium diclofenac.

Acetaminophen removal by calcium alginate/activated hydrochar composite beads: Batch and fixed-bed studies.

The occurrence of acetaminophen in surface water has been reported worldwide, indicating the need of alternative wastewater treatments. Activated hydrochar (AHC) is efficient for pharmaceuticals removal. Powdered AHC presents challenges that hamper its expansion. However, these issues can be overcome by adding polymers, such as alginate, in composite beads. Therefore, the present study aimed to develop and characterize alginate/brewer's spent grain AHC beads, applying them to acetaminophen adsorption in batch and fixed-bed experiments. The adsorbent presented a high surface area (533.42 m2 g-1) and Fourier-transform infrared spectroscopy (FTIR) showed that alginate assigned new functional groups to the composite. Batch studies revealed an endothermic behavior and maximum adsorption capacity of 165.94 mg g-1, with an equilibrium time of 240 min. The fixed-bed maximum adsorption capacity was 127.01 mg g-1, with a mass transfer zone of 5.89 cm. The importance of alginate for the adsorbent development has been successfully proven.

Chitosan, alginate and other macromolecules as activated carbon immobilizing agents: A review on composite adsorbents for the removal of water contaminants.

Activated carbon (AC) is widely used in water treatment, however, it has some technical disadvantages, such as its high cost and difficulty to recover. To overcome these drawbacks, AC particles have been encapsulated within a polymeric support, mainly chitosan and alginate-based. The use of these biological macromolecules results in composites with lower-cost, superior mechanical properties, and higher number of functional groups, advantages that have been attracted the attention of the scientific community. However, the number of publications is relatively low, demonstrating an important research gap yet to be investigated. Thus, this paper aims to review the recent studies concerning the use of chitosan, alginate and other macromolecules as AC immobilizing agents, describing the synthesis methods, characterization analyses and adsorption studies, focusing on the main advantages, disadvantages, gaps and future perspectives. Throughout the review it was verified that the composites were able to remove several water contaminants, mainly dyes and heavy metals, with high efficiency. Synergistic effects were detected, indicating the role of both polymers and AC, which increased the spectrum of contaminants capable of being adsorbed. Finally, it was observed a gap in column experiments, suggesting that future studies are essential to elucidate the applications in the industrial perspective.

Activated hydrochar produced from brewer's spent grain and its application in the removal of acetaminophen.

Acetaminophen has shown a gradual increase in detection in surface waters. Although present in low concentrations, it should be removed to prevent deleterious effects. Thus, adsorption onto activated carbon is emphasized. Adsorbents may be produced by hydrothermal carbonization (HTC), an environmental-friendly process. Therefore, this work aimed to investigate the use of HTC, verifying its application in acetaminophen removal. Brewer's spent grain (BSG), its hydrochar (HC-BSG) and its activated hydrochar (AHC-BSG) were characterized. HTC provided material with high carbon content. Lignocellulosic breakdown has been demonstrated in HC-BSG and AHC-BSG, but in the latter it was more intense as a result of activation with KOH. Also, a high surface area was found in AHC-BSG (1512.83 m2 g-1), resulting in an adsorption of 318.00 mg g-1. The pseudo-second-order and Langmuir models were fitted to the experimental data. Therefore, HTC was effective as a pretreatment for AHC-BSG, resulting in significant acetaminophen removals.

Adsorption and desorption cycles of reactive blue BF-5G dye in a bone char fixed-bed column.

In the textile industry, the amount of dye unfixed in fabrics is discarded with wastewaters. Effluents of this nature can be treated efficiently by adsorption on activated bone char, but the reuse of adsorbent is necessary for the technique to be economically feasible. Therefore, the objective of this work was to study the process of desorption of BF-5G blue dye from a bone char fixed-bed column. Solutions of sodium chloride, acetic acid and ethyl alcohol were tested as regenerating agents. Due to the hydrophobicity effect of organic solvent molecules, the highest desorption capacity was observed for ethyl alcohol solution, and the fixed bed was reused after six cycles of adsorption. The other solutions did not promote significant desorption. The results showed that adsorption of the dye involved irreversible interactions between adsorbate molecules and bone char. However, the use of acetic acid solution resulted in the neutralisation of some of the adsorbent surface charges, allowing the fixed bed to operate for a longer time in the second cycle than in the first.