RESUMO
Electronic couplings in intermolecular electron and energy transfer processes calculated by six different existing computational techniques are compared to nonorthogonal configuration interaction for fragments (NOCI-F) results. The paper addresses the calculation of the electronic coupling in diketopyrrolopyrol, tetracene, 5,5'-difluoroindigo, and benzene-Cl for hole and electron transport, as well as the local exciton and singlet fission coupling. NOCI-F provides a rigorous computational scheme to calculate these couplings, but its computational cost is rather elevated. The here-considered ab initio Frenkel-Davydov (AIFD), Dimer projection (DIPRO), transition dipole moment coupling, Michl-Smith, effective Hamiltonian, and Mulliken-Hush approaches are computationally less demanding, and the comparison with the NOCI-F results shows that the NOCI-F results in the couplings for hole and electron transport are rather accurately predicted by the more approximate schemes but that the NOCI-F exciton transfer and singlet fission couplings are more difficult to reproduce.
RESUMO
The present computational work analyzes singlet fission (SF) as a pathway for multiplication of photogenerated excitons in crystalline polyacenes. Our study explores the well-known crystalline pentacene (C22H14) and the prospective and potentially interesting doped B,N-pentacene (BC20NH14). At the molecular level, the singlet fission process involves a pair of neighboring molecules and is based on the coupling between an excited singlet state (S1S0) and two singlet-coupled triplets (1T1T1), which, typically, is influenced by an intermolecular charge transfer state. Taking data from periodic density functional theory and ab initio wave function calculations, we applied the non-orthogonal configuration interaction method to determine electronic coupling parameters. The comparison of the results for both equilibrium structures reveal smaller SF coupling for pentacene than for B,N-pentacene by a factor of â¼5. Introduction of the dynamic behavior to the crystals (vibrations, thermal motion) provides a more realistic picture of the effect of the disorder at the molecular level on the SF efficiency. The coupling values associated to out-of-equilibrium structures show that most of the S1S0/1T1T1 couplings remain virtually constant or slightly increase for pentacene when molecular disorder is introduced. Homologous calculations on B,N-pentacene show a generalized decrease in the coupling values, notably if large phonon displacements are considered. A few of the structures analyzed feature much larger SF coupling if some distortion results in (nearly) degenerate charge transfer and excited singlet and triplet states. For these particular situations, an acceleration of the SF process could occur although in competition with electron-hole separation as an alternative pathway.
RESUMO
Understanding metal-metal bonding involving f-block elements has been a challenging goal in chemistry. Here we report a series of mixed-valence di-metallofullerenes, ThDy@C2n (2n = 72, 76, 78, and 80) and ThY@C2n (2n = 72 and 78), which feature single electron actinide-lanthanide metal-metal bonds, characterized by structural, spectroscopic and computational methods. Crystallographic characterization unambiguously confirmed that Th and Y or Dy are encapsulated inside variably sized fullerene carbon cages. The ESR study of ThY@D3h(5)-C78 shows a doublet as expected for an unpaired electron interacting with Y, and a SQUID magnetometric study of ThDy@D3h(5)-C78 reveals a high-spin ground state for the whole molecule. Theoretical studies further confirm the presence of a single-electron bonding interaction between Y or Dy and Th, due to a significant overlap between hybrid spd orbitals of the two metals.
RESUMO
The developments of the open-source OpenMolcas chemistry software environment since spring 2020 are described, with a focus on novel functionalities accessible in the stable branch of the package or via interfaces with other packages. These developments span a wide range of topics in computational chemistry and are presented in thematic sections: electronic structure theory, electronic spectroscopy simulations, analytic gradients and molecular structure optimizations, ab initio molecular dynamics, and other new features. This report offers an overview of the chemical phenomena and processes OpenMolcas can address, while showing that OpenMolcas is an attractive platform for state-of-the-art atomistic computer simulations.
RESUMO
Previous characterizations of diactinide endohedral metallofullerenes (EMFs) Th2@C80 and U2@C80 have shown that although the two Th3+ ions form a strong covalent bond within the carbon cage, the interaction between the U3+ ions is weaker and described as an "unwilling" bond. To evaluate the feasibility of covalent U-U bonds, which are neglected in classical actinide chemistry, we have first investigated the formation of smaller diuranium EMFs by laser ablation using mass spectrometric detection of dimetallic U2@C2n species with 2n ≥ 50. DFT, CASPT2 calculations, and MD simulations for several fullerenes of different sizes and symmetries showed that thanks to the formation of strong U(5f3)-U(5f3) triple bonds, two U3+ ions can be incarcerated inside the fullerene. The formation of U-U bonds competes with U-cage interactions that tend to separate the U ions, hindering the observation of short U-U distances in the crystalline structures of diuranium endofullerenes as in U2@C80. Smaller cages like C60 exhibit the two interactions, and a strong triple U-U bond with an effective bond order higher than 2 is observed. Although 5f-5f interactions are responsible for the covalent interactions at distances close to 2.5 Å, overlap between 7s6d orbitals is still detected above 4 Å. In general, metal ions within fullerenes should be regarded as templates in cage formation, not as statistically confined units that have little chance of being observed.
RESUMO
First row transition metal complexes with d4 to d7 electronic configurations exhibit spin-crossover (SCO), which can be induced by external stimuli, such as temperature, pressure and light. The low-spin to high-spin transition has been widely studied, but very little is known about the reverse process. Here, we present a theoretical study of thermal and light-induced high-to-low spin crossover in prototypical Fe(II) complexes. The lifetime of the high-spin state in the thermal process is determined using Fermi's golden rule. With this methodology, we have accurately computed the transfer rate of the HS state thermal relaxation at several time scales (from sub-nanosecond to a few seconds) in two different iron complexes. The use of quasi-degenerate perturbation theory (QDPT2) in the analysis of the LS-HS spin-orbit coupling has allowed us to identify 3T1 as the main intermediate state coupling the LS and HS states. The light-induced process has been studied using wavepacket quantum dynamics along the main vibrational coordinates (one symmetric and two asymmetric Fe-N stretchings). The study suggests that after the initial excitation from the 5T2g to the 5Eg state, the population is transferred back to a vibrationally hot 5T2g state, from which a small amount of the population is transferred to the 1A1g state via the intermediate 3T1g. Most of the population remains trapped in the HS state at the time scale of the simulation.
RESUMO
Carbon monoxide dehydrogenase (CODH) enzymes are active for the reversible CO oxidation-CO2 reduction reaction and are of interest in the context of CO2 abatement and carbon-neutral solar fuels. Bioinspired by the active-site composition of the CODHs, polyoxometalates triply substituted with first-row transition metals were modularly synthesized. The polyanions, in short, {SiM3 W9 } and {SiM'2 M''W9 }, M, M', M''=CuII , NiII , FeIII are shown to be electrocatalysts for reversible CO oxidation-CO2 reduction. A catalytic Tafel plot showed that {SiCu3 W9 } was the most reactive for CO2 reduction, and electrolysis reactions yielded significant amounts of CO with 98 % faradaic efficiency. In contrast, Fe-Ni compounds such as {SiFeNi2 W9 } preferably catalyzed the oxidation of CO to CO2 similar to what is observed for the [NiFe]-CODH enzyme. Compositional control of the heterometal complexes, now and in the future, leads to control of reactivity and selectivity for CO2 electrocatalytic reduction.
RESUMO
Most aromatic ketones containing first-row elements undergo unexpectedly fast intersystem crossing in a few tens of picoseconds and a quantum yield close to unity. Among them, xanthone (9H-xanthen-9-one) possesses one of the fastest singlet-triplet rates of only â¼1.5 ps. The exact mechanism of this unusually fast transition is still under debate. Here, we perform wavepacket dynamics of the photochemistry of xanthone in the gas phase and in polar solvents. We show that xanthone follows El-Sayed's rule for intersystem crossing. From the second singlet excited state, the mechanism is sequential: (i) an internal conversion between singlets 1ππ* â 1nπ* (85 fs), (ii) an intersystem crossing 1nπ* â 3ππ* (2.0 ps), and (iii) an internal conversion between triplets 3ππ* â 3nπ* (602 fs). Each transfer finds its origin in a barrierless access to electronic state intersections. These intersections are close to minimum energy structures, allowing for efficient transitions from the initial singlet state to the triplets.
RESUMO
This Account highlights recent experimental and theoretical work focusing on the development of polyoxometalates (POMs) as possible active switching units in what may be called "molecule-based memory cells". Herein, we critically discuss how multiply charged vanadium-containing POMs, which exhibit stable metal-oxo bonds and are characterized by the excellent ability to change their redox states without significant structural distortions of the central polyoxoanion core, can be immobilized best and how they may work optimally at appropriate surfaces. Furthermore, we critically discuss important issues and challenges on the long way toward POM-based nanoelectronics. This Account is divided into four sections shedding light on POM interplay in solution and on surfaces, ion soft-landing of mass-selected POMs on surfaces, electronic modification of POMs on surfaces, and computational modeling of POMs on surfaces. The sections showcase the complex nature of far-reaching POM interactions with the chemical surroundings in solution and the properties of POMs in the macroscopic environment of electrode surfaces. Section 2 describes complex relationships of POMs with their counter-cations, solvent molecules, and water impurities, which have been shown to exhibit a direct impact on the resulting surface morphology, where a concentration-dependent formation of micellar structures can be potentially observed. Section 3 gives insights into the ion soft-landing deposition of mass-selected POMs on electrode surfaces, which emerges as an appealing method because the simultaneous deposition of agglomeration-stimulating counter-cations can be avoided. Section 4 provides details of electronic properties of POMs and their modification by external electronic stimuli toward the development of multiple-state resistive (memristive) switches. Section 5 sheds light on issues of the determination of the electronic structure properties of POMs across their interfaces, which is difficult to address by experiment. The studies summarized in these four sections have employed various X-ray-scattering, microscopy, spectroscopy, and computational techniques for imaging of POM interfaces in solution and on surfaces to determine the adsorption type, agglomeration tendency, distribution, and oxidation state of deposited molecules. The presented research findings and conceptual ideas may assist experimentalists and theoreticians to advance the exploration of POM electrical conductivity as a function of metal redox and spin states and to pave the way for a realization of ("brain-inspired") POM-based memory devices, memristive POM-surface device engineering, and energy efficient nonvolatile data storage and processing technologies.
RESUMO
The effects of a gate potential on the conductance of two members of the EMAC family, Ru3(dpa)4(NCS)2 and its asymmetric analogue, [Ru3(npa)4(NCS)2]+, are explored with a density functional approach combined with non-equilibrium Green's functions. From a computational perspective, the inclusion of an electrochemical gate potential represents a significant challenge because the periodic treatment of the electrode surface resists the formation of charged species. However, it is possible to mimic the effects of the electrochemical gate by including a very electropositive or electronegative atom in the unit cell that will effectively reduce or oxidize the molecule under study. In this contribution we compare this approach to the more conventional application of a solid-state gate potential, and show that both generate broadly comparable results. For two extended metal atom chain (EMAC) compounds, Ru3(dpa)4(NCS)2 and [Ru3(npa)4(NCS)2], we show that the presence of a gate potential shifts the molecular energy levels in a predictable way relative to the Fermi level, with distinct peaks in the conductance trace emerging as these levels enter the bias window.
RESUMO
Singlet fission (SF), a multiexciton generation process, has been proposed as an alternative to enhance the performance of solar cells. The gas phase dimer model has shown its utility to study this process, but it does not always cover all the physics and the effect of the surrounding atoms has to be included in such cases. In this contribution, we explore the influence of crystal packing on the electronic couplings, and on the so-called exciton descriptors and electron-hole correlation plots. We have studied three tetracene dimers extracted from the crystal structure, as well as several dimers and trimers of the α and ß polymorphs of 1,3-diphenylisobenzofuran (DPBF). These polymorphs show different SF yields. Our results highlight that the character of the excited states of tetracene depends on both the mutual disposition of molecules and inclusion of the environment. The latter does however not change significantly the interpretation of the SF mechanism in the studied systems. For DPBF, we establish how the excited state analysis is able to pinpoint differences between the polymorphs. We observe strongly bound correlated excitons in the ß polymorph which might hinder the formation of the 1TT state and, consequently, explain its low SF yield.
RESUMO
This computational study presents the molecular conduction properties of two members of the polyoxovanadate (POV) class of molecules, V6O19 (Lindqvist-type) and V18O42, which have been targeted as possible successors of the materials that are currently used in complementary metal-oxide semiconductor (CMOS) technology. Molecular conductivity calculations on the Lindqvist-type POV absorbed on Au(111) shows a staircase conductivity as function of the applied bias voltage, which is directly related to the oxidation state of the absorbed molecule. After these proof-of-principle calculations we applied the same technique to the larger V18O42, a system featuring many more easily attainable redox states, and hence, in principle even more interesting from the multiple-state resistive (memristive) viewpoint. The calculated transmission strongly suggests that this molecule does not possess staircase conductivity, a fact ascribed to the large number of unpaired electrons in the resting state.
RESUMO
The nature of the actinide-actinide bonds is of fundamental importance to understand the electronic structure of the 5f elements. It has attracted considerable theoretical attention, but little is known experimentally as the synthesis of these chemical bonds remains extremely challenging. Herein, we report a strong covalent Th-Th bond formed between two rarely accessible Th3+ ions, stabilized inside a fullerene cage nanocontainer as Th2@Ih(7)-C80. This compound is synthesized using the arc-discharge method and fully characterized using several techniques. The single-crystal X-Ray diffraction analysis determines that the two Th atoms are separated by 3.816 Å. Both experimental and quantum-chemical results show that the two Th atoms have formal charges of +3 and confirm the presence of a strong covalent Th-Th bond inside Ih(7)-C80. Moreover, density functional theory and ab initio multireference calculations suggest that the overlap between the 7s/6d hybrid thorium orbitals is so large that the bond still exists at Th-Th separations larger than 6 Å. This work demonstrates the authenticity of covalent actinide metal-metal bonds in a stable compound and deepens our fundamental understanding of f element metal bonds.
RESUMO
Electron and charge transfers are part of many vital processes in nature and technology. Ab initio descriptions of these processes provide useful insights that can be utilized for applications. A combination of the embedded cluster material model and nonorthogonal configuration interaction (NOCI), in which the cluster wave functions are expanded in many-electron basis functions (MEBFs) consisting of spin-adapted, antisymmetrized products of multiconfigurational wave functions of fragments (which are usually molecules) in the cluster, appears to provide a compromise between accuracy and calculation time. Additional advantages of this NOCI-Fragments approach are the chemically convenient interpretation of the wave function in terms of molecular states, and the direct accessibility of electronic coupling between diabatic states to describe energy and electron transfer processes. Bottlenecks in this method are the large number of two-electron integrals that have to be handled for the calculation of an electronic coupling matrix element and the enormous number of matrix elements over determinant pairs that have to be evaluated for the calculation of one matrix element between the MEBFs. We show here how we created a reduced common molecular orbital basis that is utilized to significantly reduce the number of two-electron integrals that need to be handled. The results obtained with this basis do not show any loss of accuracy in relevant quantities like electronic couplings and vertical excitation energies. We also show a significant reduction in computation time without loss in accuracy when matrix elements over determinant pairs with small weights are neglected in the NOCI. These improvements in the methodology render NOCI-Fragments to be also applicable to treat clusters of larger molecular systems with larger atomic basis sets and larger active spaces, as the computation time becomes dependent on the number of occupied orbitals and less dependent on the size of the active space.
RESUMO
For the first time, an actinide nitride clusterfullerene, U2N@I h(7)-C80, is synthesized and fully characterized by X-ray single crystallography and multiple spectroscopic methods. U2N@I h(7)-C80 is by far the first endohedral fullerene that violates the well-established tri-metallic nitride template for nitride clusterfullerenes. The novel U[double bond, length as m-dash]N[double bond, length as m-dash]U cluster features two U[double bond, length as m-dash]N bonds with uneven bond distances of 2.058(3) Å and 1.943(3) Å, leading to a rare unsymmetrical structure for the dinuclear nitride motif. The combined experimental and theoretical investigations suggest that the two uranium ions show different oxidation states of +4 and +5. Quantum-chemical investigation further reveals that the f1/f2 population dominantly induces a distortion of the U[double bond, length as m-dash]N[double bond, length as m-dash]U cluster, which leads to the unsymmetrical structure. A comparative study of U2X@C80 (X = C, N and O) reveals that the U-X interaction in U[double bond, length as m-dash]X[double bond, length as m-dash]U clusters can hardly be seen as being formed by classical multiple bonds, but is more like an anionic central ion X q- with biased overlaps with the two metal ions, which decrease as the electronegativity of X increases. This study not only demonstrates the unique bonding variety of actinide clusters stabilized by fullerene cages, showing different bonding from that observed for the lanthanide analogs, it also reveals the electronic structure of the U[double bond, length as m-dash]X[double bond, length as m-dash]U clusters (X = C, N and O), which are of fundamental significance to understanding these actinide bonding motifs.
RESUMO
The photoinduced properties of the octacoordinated complex K4 MoIV (CN)8 â 2 H2 O were studied by theoretical calculations, crystallography, and optical and magnetic measurements. The crystal structure recorded at 10â K after blue light irradiation reveals an heptacoordinated Mo(CN)7 species originating from the light-induced cleavage of one Mo-CN bond, concomitant with the photoinduced formation of a paramagnetic signal. When this complex is heated to 70â K, it returns to its original diamagnetic ground state, demonstrating full reversibility. The photomagnetic properties show a partial conversion into a triplet state possessing significant magnetic anisotropy, which is in agreement with theoretical studies. Inspired by these results, we isolated the new compound [K(crypt-222)]3 [MoIV (CN)7 ]â 3 CH3 CN using a photochemical pathway, confirming that photodissociation leads to a stable heptacyanomolybdate(IV) species in solution.
RESUMO
Copper cysteamine (Cu-Cy) is a new type of photosensitizer, which can be activated not only by ultraviolet light, but also by X-rays, microwaves and ultrasound to generate reactive oxygen species for treating cancer and infection diseases. Moreover, copper cysteamine has a strong luminescence, which can be used for both therapeutics and imaging. In addition, it can also be used for solid state lighting, radiation detection and sensing. However, its electronic structures, and particularly its excited states, are not yet clear. Here, we present a computational study aiming to determine the nature of the excited states involved in the photophysical processes that lead to the luminescence of this compound. This study has been conducted using density functional theory (DFT), using both hybrid functionals and time-dependent DFT. It is found that both absorption and emission involve the replacement of an electron among the 3d and 4s orbitals of one or the other of the two types of Cu atoms found in the system. Our computed results compared well with the experimental absorption and emission results. These results are very helpful for the understanding of the experimental observations.
RESUMO
A series of stable reduction-oxidation states of the cagelike [I@VIV xVV18- xO42]5- x polyoxovanadate (POV) with x = 8, 10, 12, 16, and 18 were studied with density functional theory and molecular dynamics to gain insight into the structural and electron distribution characteristics of these metal-oxo clusters and to analyze the charge/redox-dependent assemblage processes in water and acetonitrile (MeCN) solutions. The calculations show that the interplay between the POV redox state (molecular charge) and the solvent polarity, countercation size, and hydrophilicity (or hydrophobicity) controls the POV agglomeration phenomena, which substantially differ between aqueous and MeCN media. In MeCN, agglomeration is more pronounced for intermediate-charged POVs, whereas in water, the lowest-charged POVs and organic countercations tend to agglomerate into a microphase. Tests made on wet MeCN show diminished agglomeration with respect to pure MeCN. Simulations with alkali countercations in water show that only the highest-charged POV can form agglomerates. The herein presented theoretical investigation aims to support experimental studies of POVs in the field of functional nanomaterials and surfaces, where controlled molecular deposition from the liquid phase onto solid substrates requires knowledge about the features of these metal-oxo clusters in discrete solutions.
RESUMO
Extended metal atom chains constitute an interesting class of molecules from both theoretical and applied points of view. In the chromium-based series Cr2M(dpa)4X2 (with M = Zn, Ni, Fe, Mn, Cr), the direct metal-metal interactions span a wide range of possibilities and so do their associated properties. The multiplicity and symmetry components of the metal-metal bond are herein analyzed via the effective bond order (EBO) concept using complete active space self-consistent field wave functions and compared with similar bimetallic Cr2L4X2 systems. The bond multiplicity follows a trend dominated by the Cr-Cr distance which, in turn, depends on the nature of the axial ligand (X). Cr2M compounds present asymmetric structures with virtually no interaction between the Cr2 unit and M, whereas fully symmetric structures with delocalized bonding among the three metals are also possible in Cr3 complexes. In such cases, a strategy that involves localization of the molecular orbitals into each Cr-Cr pair is applied to quantify the contribution of each pair to the overall metal-metal bond multiplicity.
RESUMO
Investigation of the excited-state decay dynamics of transition-metal systems is a crucial step for the development of photoswitchable molecular based materials with applications in growing fields as energy conversion, data storage, or molecular devices. The photophysics of these systems is an entangled problem arising from the interplay of electronic and geometrical rearrangements that take place on a short time scale. Several factors play a role in the process: various electronic states of different spin and chemical character are involved, the system undergoes important structural variations and several nonradiative processes can occur. Computational chemistry is a useful tool to get insight into the microscopic description of the photophysics of these materials, since it provides unique information about the character of the electronic spin states involved, the energetics and time evolution of the system. In this review article, we present an overview of the state of the art methodologies available to address the several aspects that have to be incorporated to properly describe the deactivation of excited states in transition-metal complexes. The most recent developments in theoretical methods are discussed and illustrated with examples.