Brominated flame retardants in animal derived foods in the Netherlands between 2009 and 2014.

Polybrominated diphenylethers (PBDEs), hexabromocyclododecanes (HBCDDs) and tetrabromobisphenol A (TBBPA) were monitored in various foods from terrestrial and aquatic animal origin (>850 samples), collected in the Netherlands between 2009 and 2014. The terrestrial samples included meat/fat from 7 animal species (including bovines, pigs, broilers and sheep), bovine milk and hen eggs. Dominant PBDE congeners in these samples were BDE-47, -99, -100, -153 and -183. The meat/fat generally contained the highest ∑PBDE concentrations compared to eggs and milk, with meat from deer, horse and sheep containing the highest concentrations. Generally declining ∑PBDE concentrations were observed between 2009 and 2014, however, this was only significant in pig meat and hen's eggs. The aquatic samples included fillets from 18 species (including herring, haddock and salmon), brown crab parts, shrimp and mussels, and the highest ∑PBDE concentrations were seen in body parts of brown crab, herring, mackerel, salmon and sea bass (on wet weight basis). Patterns generally contained more congeners (i.e., BDE-28, -49 and -66) additional to the aforementioned congeners found in terrestrial samples. Herring, sea bass and brown crab (body parts) contained among the highest PBDE concentrations. TBBPA was only detected in 3 individual samples (bovine and broiler meat and haddock), while α-HBCDD was the dominant diastereomer detected in several terrestrial and aquatic samples. When detected, TBBPA and HBCDD concentrations were generally in the same order as ∑PBDE concentrations in the same sample types.

Blood and urine analyses after radioembolization of liver malignancies with [166Ho]Ho-acetylacetonate-poly(l-lactic acid) microspheres.

BACKGROUND: [166Ho]Ho-acetylacetonate-poly(L-lactic acid) microspheres were used in radioembolization of liver malignancies by intra-arterial administration. The primary aim of this study was to assess the stability and biodistribution of these microspheres. MATERIALS AND METHODS: Peripheral blood and urine samples were obtained from two clinical studies. Patient and in vitro experiment samples were analyzed using inductively coupled plasma mass spectrometry (ICP-MS), gamma-ray spectroscopy, light microscopy, Coulter particle counting, and high performance liquid chromatography (HPLC). RESULTS: The median percentage holmium compared to the total amount injected into the hepatic artery was 0.19% (range 0.08-2.8%) and 0.32% (range 0.03-1.8%) in the 1 h blood plasma and 24 h urine, respectively. Both the blood plasma and urine were correlated with the neutron irradiation exposure required for [166Ho]Ho-AcAc-PLLA microsphere production (ρ = 0.616, p = 0.002). After a temporary interruption of the phase 2 clinical study, the resuspension medium was replaced to precipitate [166Ho]Ho3+ pre-administration using phosphate. The in vitro near-maximum neutron irradiation experiments showed significant [166Ho]Ho-AcAc-PLLA microsphere damage. CONCLUSION: The amount of holmium in the peripheral blood and urine samples after [166Ho]Ho-AcAc-PLLA microsphere intrahepatic infusion was low. A further decrease was observed after reformulation of the resuspension solution but minimization of production damage is necessary.

Dioxins, PCBs and heavy metals in Chinese mitten crabs from Dutch rivers and lakes.

Chinese mitten crab is an invasive species in many European rivers and lakes. Data from the UK indicated high levels of dioxins and PCBs, in particular in the brown meat in the body. This was confirmed by studies in the Netherlands, showing average levels of dioxins and PCBs in the meat in the body of 43 pg TEQ g(-1) ww in crabs caught in the large rivers. Levels in crab of lakes in the Northern part of the Netherlands were on average 3.7-fold lower. Consumption of crabs from polluted areas results in a relatively high dose of dioxins and dl-PCBs and could significantly increase the intake above the TWI. However, in general consumption of these crabs is low, even in the Asian sub-population in the Netherlands. Cadmium and lead levels were higher in crabs from contaminated areas, but for mercury and arsenic there was no clear difference. Consumption of crabs would not result in significant risks for cadmium and mercury. For lead the daily intake could be raised above the BMDL01 for neurodevelopmental toxicity, but this would only occur on a limited number of days. For arsenic the exposure would exceed the lower end of the BMDL01 values for certain cancers, but again, the infrequent consumption by most consumers reduces this risk. Furthermore, speciation showed that most arsenic in crabs was probably not a toxic inorganic form, but likely to be in an organic form.

metAlignID: a high-throughput software tool set for automated detection of trace level contaminants in comprehensive LECO two-dimensional gas chromatography time-of-flight mass spectrometry data.

A new alternative data processing tool set, metAlignID, is developed for automated pre-processing and library-based identification and concentration estimation of target compounds after analysis by comprehensive two-dimensional gas chromatography with mass spectrometric detection. The tool set has been developed for and tested on LECO data. The software is developed to run multi-threaded (one thread per processor core) on a standard PC (personal computer) under different operating systems and is as such capable of processing multiple data sets simultaneously. Raw data files are converted into netCDF (network Common Data Form) format using a fast conversion tool. They are then preprocessed using previously developed algorithms originating from metAlign software. Next, the resulting reduced data files are searched against a user-composed library (derived from user or commercial NIST-compatible libraries) (NIST=National Institute of Standards and Technology) and the identified compounds, including an indicative concentration, are reported in Excel format. Data can be processed batch wise. The overall time needed for conversion together with processing and searching of 30 raw data sets for 560 compounds is routinely within an hour. The screening performance is evaluated for detection of pesticides and contaminants in raw data obtained after analysis of soil and plant samples. Results are compared to the existing data-handling routine based on proprietary software (LECO, ChromaTOF). The developed software tool set, which is freely downloadable at www.metalign.nl, greatly accelerates data-analysis and offers more options for fine-tuning automated identification toward specific application needs. The quality of the results obtained is slightly better than the standard processing and also adds a quantitative estimate. The software tool set in combination with two-dimensional gas chromatography coupled to time-of-flight mass spectrometry shows great potential as a highly-automated and fast multi-residue instrumental screening method.

Qualitative screening and quantitative determination of pesticides and contaminants in animal feed using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry.

A method has been developed for the target analysis of over 100 pesticides and contaminants in a complex feed matrix. The method is based on extraction with ethyl acetate, cleanup by gel permeation chromatography (GPC) and dispersive solid-phase extraction (SPE) with primary secondary amine phase (PSA), and analysis by comprehensive two-dimensional gas chromatography with full scan time-of-flight mass spectrometric detection (GC x GC-TOF-MS). Parameters studied during method development included a dispersive SPE cleanup step after GPC, large volume injection into the GC system and the GC x GC separation. Qualitative and quantitative performance of the GC x GC system was evaluated by analyzing spiked extracts in the range equivalent to 1-100 microg/kg in feed. At levels of 50 microg/kg and higher, all compounds targeted for could be identified fully automatically by the software based on their mass spectra. At lower levels the hit rate decreased with the concentration. System linearity was excellent in solvent and only slightly affected by matrix (correlation coefficients r>or=0.995 for 90% of the compounds). Limits of quantification were in the 1-20 microg/kg range for most compounds. The overall method was validated for 106 compounds at the 10 and 100 microg/kg level. Recoveries between 70% and 110% and RSDs below 20% were obtained for the majority of the compounds.

Deposition precipitation for the preparation of carbon nanofiber supported nickel catalysts.

Deposition precipitation of nickel hydroxide onto modified carbon nanofibers has been studied and compared to deposition onto silica. The carbon nanofiber support materials consisted of graphite-like material of the fishbone-type with a diameter of 20-50 nm and a specific surface area of 150 m2/g. Modification involved surface oxidation (CNF-O) optionally followed by partial reduction (CNF-OR) or thermal treatment (CNF-OT). Titration of the support materials showed the presence of 0.17 and 0.03 mmol/g carboxylic acid groups for CNF-O and CNF-OR, respectively. For the CNF-OT only basic groups were present. The deposition precipitation of 20 wt % nickel onto these supports has been studied by time dependent pH and nickel loading studies. With silica, nickel ion adsorption did not occur prior to nucleation of the nickel hydroxide phase at pH = 5.6. With CNF-O, nickel ion adsorption took place right from the start of the deposition process at pH = 3.5, and at pH = 5.6 already 4 wt % nickel was adsorbed. Nucleation of nickel hydroxide onto adsorbed nickel ion clusters proceeded subsequently. Characterization of the dried Ni/CNF-O samples with TEM and XRD showed well dispersed and thin (5 nm) platelets of nickel hydroxide adhering to the carbon nanofibers. After reduction at 773 K in hydrogen the Ni/CNF-O contained metallic nickel particles of 8 nm homogeneously distributed over the fibers. With CNF-OR and CNF-OT, precipitation of large platelets (> 500 nm) separate from the support took place. Clearly, the presence of carboxylic acid groups is essential to successfully deposit nickel hydroxide onto modified carbon nanofibers.