Disentangling microbial coupled fillers mechanisms for the permeable layer optimization process in multi-soil-layering systems.

The multi-soil-layering (MSL) systems is an emerging solution for environmentally-friendly and cost-effective treatment of decentralized rural domestic wastewater. However, the role of the seemingly simple permeable layer has been overlooked, potentially holding the breakthroughs or directions to addressing suboptimal nitrogen removal performance in MSL systems. In this paper, the mechanism among diverse substrates (zeolite, green zeolite and biological ceramsite) coupled microorganisms in different systems (activated bacterial powder and activated sludge) for rural domestic wastewater purification was investigated. The removal efficiencies performed by zeolite coupled with microorganisms within 3 days were 93.8% for COD, 97.1% for TP, and 98.8% for NH4+-N. Notably, activated sludge showed better nitrification and comprehensive performance than specialized nitrifying bacteria powder. Zeolite attained an impressive 89.4% NH4+-N desorption efficiency, with a substantive fraction of NH4+-N manifesting as exchanged ammonium. High-throughput 16S rRNA gene sequencing revealed that aerobic and parthenogenetic anaerobic bacteria dominated the reactor, with anaerobic bacteria conspicuously absent. And the heterotrophic nitrification-aerobic denitrification (HN-AD) process was significant, with the presence of denitrifying phosphorus-accumulating organisms (DPAOs) for simultaneous nitrogen and phosphorus removal. This study not only raises awareness about the importance of the permeable layer and enhances comprehension of the HN-AD mechanism in MSL systems, but also provides valuable insights for optimizing MSL system construction, operation, and rural domestic wastewater treatment.

From the cauldron of conflict: Endogenous gene regulation by piRNA and other modes of adaptation enabled by selfish transposable elements.

Transposable elements (TEs) provide a prime example of genetic conflict because they can proliferate in genomes and populations even if they harm the host. However, numerous studies have shown that TEs, though typically harmful, can also provide fuel for adaptation. This is because they code functional sequences that can be useful for the host in which they reside. In this review, I summarize the "how" and "why" of adaptation enabled by the genetic conflict between TEs and hosts. In addition, focusing on mechanisms of TE control by small piwi-interacting RNAs (piRNAs), I highlight an indirect form of adaptation enabled by conflict. In this case, mechanisms of host defense that regulate TEs have been redeployed for endogenous gene regulation. I propose that the genetic conflict released by meiosis in early eukaryotes may have been important because, among other reasons, it spurred evolutionary innovation on multiple interwoven trajectories - on the part of hosts and also embedded genetic parasites. This form of evolution may function as a complexity generating engine that was a critical player in eukaryotic evolution.

Biofoundry-Assisted Golden Gate Cloning with AssemblyTron.

Golden Gate assembly is a requisite method in synthetic biology that facilitates critical conventions such as genetic part abstraction and rapid prototyping. However, compared to robotic implementation, manual Golden Gate implementation is cumbersome, error-prone, and inconsistent for complex assembly designs. AssemblyTron is an open-source python package that provides an affordable automation solution using open-source OpenTrons OT-2 lab robots. Automating Golden Gate assembly with AssemblyTron can reduce failure-rate, resource consumption, and training requirements for building complex DNA constructs, as well as indexed and combinatorial libraries. Here, we dissect a panel of upgrades to AssemblyTron's Golden Gate assembly capabilities, which include Golden Gate assembly into modular cloning part vectors, error-prone polymerase chain reaction (PCR) combinatorial mutant library assembly, and modular cloning indexed plasmid library assembly. These upgrades enable a broad pool of users with varying levels of experience to readily implement advanced Golden Gate applications using low-cost, open-source lab robotics.

Generating Site Saturation Mutagenesis Libraries and Transferring Them to Broad Host-Range Plasmids Using Golden Gate Cloning.

Protein engineering is an established method for tailoring enzymatic reactivity. A commonly used method is directed evolution, where the mutagenesis and natural selection process is mimicked and accelerated in the laboratory. Here, we describe a reliable method for generating saturation mutagenesis libraries by Golden Gate cloning in a broad host range plasmid containing the pBBR1 replicon. The applicability is demonstrated by generating a mutant library of the iron nitrogenase gene cluster (anfHDGK) of Rhodobacter capsulatus, which is subsequently screened for the improved formation of molecular hydrogen.

A one-pot hydrothermal synthesis of morphologically controllable yolk-shell structured CoFe glycerate spheres for oxygen evolution reaction.

CoFe-based catalysts are efficient electrocatalysts for the oxygen evolution reaction (OER) in alkaline media. Here, we present a simple one-pot hydrothermal method for synthesizing a series of CoFe glycerates with controllable surface morphologies and investigate their potential as highly efficient catalysts for the OER in alkaline media. These CoFe glycerates exhibit a unique yolk-shell microsphere structure assembled from ultrathin nanosheets. The adjustment of the surface nanosheet size is achieved by varying the CoFe ratio, ensuring a more efficient electrocatalytic system for the OER process. Due to the abundant active sites provided by the yolk-shell structure and interleaved ultrathin nanosheets, Co3Fe1 glycerate (Co3Fe1 gly) demonstrates a low overpotential (283 mV) and a small Tafel slope (44.61 mV dec-1) at 10 mA cm-2. Additionally, Co3Fe1 gly exhibits excellent durability in alkaline electrolytes. Moreover, a series of characterizations demonstrate that the active sites of Co3Fe1 gly are the high-valence Co species generated during the OER process. This study opens a promising avenue for utilizing efficient and low-cost electrocatalysts to enhance OER performance.

Built-in electric field control of electron redistribution (NiFe-based electrocatalyst) with efficient overall water splitting at industrial temperature.

Nickel-iron layered double hydroxide (NiFe-LDH) is hindered in its further development in water splitting due to its slow kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this study, the synthesis of OER (FeO(OH)/NiFe-LDH) and HER (Fe7S8(NiS)/NiFe-LDH) catalysts endowed with inherent electric fields exhibited exceptional electrocatalytic properties. The presence of the built-in electric field modulated the redistribution of electrons within the catalyst, while the formation of a heterostructure preserved the intrinsic characteristics of the catalyst. Moreover, this electron redistribution optimized the catalyst's adsorption of reaction intermediates (O*, OH*, OOH*, and H*) during the catalytic process, thereby enhancing the performance of both OER and HER. The electrolytic cell, equipped with these catalysts, achieved the current density of 10 mA cm-2 at a remarkably low potential of 1.409 V under industrial temperature conditions and demonstrated an ultra-long-term stability of 200 h.

Low Rh doping accelerated HER/OER bifunctional catalytic activities of nanoflower-like Ni-Co sulfide for greatly boosting overall water splitting.

Facile synthesis of high-efficiency and stable bifunctional electrocatalyst is essential for producing clean hydrogen in energy storage systems. Herein, low Rh-doped flower-like Ni3S2/Co3S4 heterostructures were facilely prepared on porous nickel foam (labeled Rh-Ni3S2/Co3S4/NF) by a hydrothermal method. The correlation of the precursors types with the morphological structures and catalytic properties were rigorously investigated for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in the control groups. The low Rh doping within the catalyst played important role in boosting the catalytic characteristics. The resulting catalyst showed the smaller overpotentials of 197 and 78 mV to drive a current density of 10 mA cm-2 for the OER and HER in alkaline electrolyte, respectively. And the potential only required 1.71 V to drive a current density of 100 mA cm-2 in a water splitting device. It reflects excellent overall water splitting of the home-made Rh-Ni3S2/Co3S4/NF. This strategy shed some constructive light for preparing transition metal sulfide-based electrocatalysts in water splitting devices.

Electrochemical reconfiguration of iron-modified Ni3S2 surface induced oxygen vacancies to immobilize sulfate for enhanced oxygen evolution reaction.

There is an urgent need for highly active, durable, and low-cost electrocatalysts to overcome the shortcomings of high overpotential in the oxygen evolution reaction (OER) process. In this work, the nickel-iron hydroxysulfate rich in sulfate and oxygen vacancies (SO42-@Fe-NiOOH-Ov/NiS) is legitimately constructed. SO42-@Fe-NiOOH-Ov/NiS only requires a low overpotentials of 190 mV and 232 mV at 10 mA cm-2 and 100 mA cm-2 current densities in 1 M KOH, with excellent stability for 200 h at 100 mA cm-2 current density. In situ Raman spectroscopy and Fourier transform infrared spectroscopy demonstrated the stable adsorption of more SO42- on the surface of catalyst. Density functional theory calculations testify surface reconstruction, doped Fe and oxygen vacancies significantly reduced the adsorption energy of sulfate on the surface. More importantly, the formation of *OOH to O2 is facilitated by the highly hydrogen bonding between SO42- and *OOH, accelerating the OER process.

Binary ruthenium dioxide and nickel oxide ultrafine particles loaded on carbon nanotubes for high-stability oxygen evolution reaction at high current densities.

RuO2 is an efficient electrocatalyst for the oxygen evolution reaction (OER). However, during the OER process, RuO2 is prone to oxidation into Rux+ (x > 4), leading to its dissolution in the electrolyte and resulting in poor stability of RuO2. Here, we report a bicomponent electrocatalyst, NiO and RuO2 co-loaded on carbon nanotubes (RuO2/NiO/CNT). The results demonstrate that the introduction of NiO suppresses the over-oxidation of RuO2 during the OER process, not only inheriting the excellent catalytic performance of RuO2, but also significantly enhancing the stability of the catalyst for OER at high current densities. In contrast to RuO2/CNT, RuO2/NiO/CNT shows no significant change in activity after 150 h of OER at a current density of 100 mA cm-2. Density functional theory (DFT) calculations indicate that NiO transfers a large number of electrons to RuO2, thereby reducing the oxidation state of Ru. In conclusion, this study provides a detailed analysis of the phenomenon where low-valent metal oxides have the ability to enhance the stability of RuO2 catalysts.

Two-dimensional confined topotactic transformation to produce Co-Pi/Co3O4 hybrid porous nanosheets for promoted water oxidation.

Exploring advanced electrocatalyst for the oxygen evolution reaction (OER) is of great importance in pursuing efficient and sustainable hydrogen production via electrolytic water splitting. Considering the structure-activity-stability relationship for designing advanced OER catalysts, two-dimensional (2D) porous catalyst with single crystallinity is deemed to be an ideal platform which could simultaneously endow enriched active sites, facile mass and charge transport ability as well as robust structural stability. Herein, we proposed a facile 2D confined topotactic phase transformation approach, which realizes the fabrication of highly porous single-crystalline Co3O4 nanosheets with in-situ surface modification of amorphous Co-Pi active species. Benefitted from the highly exposed undercoordinated cobalt sites, facilitated mass transport and facile 2D charge transfer pathway, the Co-Pi/Co3O4 hybrid porous nanosheets display enhanced OER activity with obvious pre-oxidation-induced activation. In addition, the operational stability was significantly improved owing to the strengthened structural stability which effectively buffers the internal strains and avoids the structural collapse during the electrochemical process. This work proposed a facile and mild method for the synthesis of amorphous/single-crystalline hybrid porous materials, and the achievement of synergistic modulation of active site density and charge transfer ability via targeted microstructural construction will shed light on catalyst design in the future.

Construction of iron-doped nickel cobalt phosphide nanoparticles via solvothermal phosphidization and their application in alkaline oxygen evolution.

Multi-metallic phosphides offer the possibility to combine the strategies of surface reconstruction, electronic interaction and mechanistic pathway tuning to achieve high electrocatalytic oxygen evolution activity. Here, iron-doped nickel cobalt phosphide nanoparticles (FexCoyNi2-x-yP) with the crystalline NiCoP phase are for the first time synthesized by the solvothermal phosphidization method via the reaction between metal-organic frameworks and white phosphorus. When used to electrochemically catalyze oxygen evolution reaction (OER), the Fe0.4Co0.8Ni0.8P supported by nickel foam requires only 248 mV overpotential to achieve 10 mA cm-2 current densities, and is robust towards the long-term OER in 1 M KOH. The higher number of electrochemically active sites can account for the good OER activity, along with the improved intrinsic activity which is caused by the electron interaction that optimizes the adsorption energy of hydroxyl intermediates, and that increases the acidity of high-valent metal centers. The OER mechanistic pathway involves both adsorbate and lattice oxygen. Surface conversion is observed after OER in alkaline solution, and metal phosphide layer transforms to metal oxides and (oxy)hydroxides.

Boosting electrocatalytic hydrogen evolution via partial oxidation of rhenium through cobalt modification in nanoalloy structure.

Although the theoretical electrocatalytic activity of rhenium (Re) for the hydrogen evolution reaction is comparable to that of platinum, the experimental performance of reported rhenium-based electrocatalysts remains unsatisfactory. Herein, we report a highly efficient and stable electrocatalyst composed of rhenium and cobalt (Co) nanoalloy embedded in nitrogen-doped carbon film (Re3Co2@NCF). The Re3Co2@NCF electrocatalyst exhibited remarkable hydrogen evolution performance, with an overpotential as low as 30 ± 3 mV to reach a current density of 10 mA cm-2. In addition, the Re3Co2@NCF demonstrated exceptional stability over several days at a current density of 150 mA cm-2. Theoretical calculations revealed that alloying cobalt with rhenium altered the electronic structure of the metals, causing partial oxidation of the superficial metal atoms. This modification provided a balance for various intermediates' adsorption and desorption, thereby boosting the intrinsic activity of rhenium for hydrogen evolution reaction. This work improves the electrocatalytic performance of rhenium to its theoretical activity, suggesting a promising future for rhenium-based electrocatalysts.

Metal organic framework-assisted copper-modified titania (Cu/TiO2) with abundant exposed active sites and highly accessible pore channels for an enhanced photo-generation of hydrogen.

Metal-doping is a common strategy for establishing active sites on photocatalyst, but appropriately exposing them for maximized atomic utilization remains a great challenge in photocatalytic research. Herein, we propose a metal organic framework (MOF)-assisted approach to synthesis copper-modified titania (Cu-TiO2/Cu) photocatalyst with homogenously distributed and highly accessible active sites in its matrix. Significantly, an MOF precursor, namely NH2-MIL-125, with co-chelation of titania (Ti) and copper (Cu) was subjected to mild calcination, subsequently results in Cu-modified TiO2 with highly accessible channels to its inner surface. These channels provide not only a large reactive surface (>400 m2 g-1); they also enable facile modifying route for the pre-deposited Cu in prior to photoreaction. Specifically, NH3 treatment was applied to partially reduce deposited Cu ions (Cu+ and Cu2+) into Cu nanoparticles, where their interplays realize improved optical properties and charge separation during photoreactions. Furthermore, the NH3-induced Cu nanoparticles could also serve as the adsorptive site for H+, thereby enabling 5629 µmol h-1 g-1 H2 generation over the optimum photocatalyst of Cu20/TiO2/Cu500. Such performance is associated to 35.44 and 1.71-fold improvements compared to pure TiO2 (Cu0/TiO2) and untreated Cu-ion modified TiO2 (Cu20/TiO2), respectively. This work offers a new synthetic strategy for obtaining photocatalyst with evenly distributed and highly accessible active sites, thus improving the commensurability of photocatalytic H2 generation from the industrial perspective.

Boron-doped diamond composites for durable oxygen evolution.

The urgent need to develop efficient, durable, and cost-effective oxygen evolution reaction (OER) catalysts for energy conversion and storage has prompted extensive research. Currently available commercial noble metal-based OER catalysts are expensive and exhibit limited long-term stability. In this study, boron-doped diamond composites (BDDCs) consisting of CoFe and CoFe2C nanoparticles supported by boron-doped diamond (BDD) particles have been prepared. The BDDC catalyst, prepared through a straightforward annealing process, exhibits exceptional durability (up to 72 h at 10 mA cm-2), a low overpotential (306 mV at 10 mA cm-2), and modest Tafel slope (58 mV dec-1). The coherent interfaces between CoFe/CoFe2C nanoparticles and the BDD substrate are essential for enhancing the OER performance. The fabrication method and composite structures presented in this study may facilitate the design and production of promising catalysts.

Synthesis of Pt-doped CoFe layered double hydroxide derived from zeolitic imidazolate framework for efficient electrochemical oxygen evolution reaction.

Zeolitic imidazolate frameworks (ZIFs), a class of promising metal organic frameworks (MOFs) material, display high porosity and chemical/thermal stability. However, there are problems such as few active sites and restricted exposed active areas, which limit the oxygen evolution reaction (OER) performance of catalysts. Here, starting from zeolitic imidazolate framework-67 (ZIF-67), we have successfully synthesized Pt-doped CoFe layered double hydroxide (Pt/CoFe LDH) catalysts for efficient OER catalysis. The obtained Pt/CoFe LDH-4 catalysts provides large surface areas and abundant active sites, which further improves the OER performance. In detail, the Pt/CoFe LDH-4 exhibits a lower overpotential of 263 mV at a current density of 40 mA cm-2, in 1 M KOH solution, the stability of the catalyst exceeds 120 h at this current density, far superior to commercial catalyst RuO2. This study describes a new design idea for synthesis of LDH catalytic materials with low noble metal doping, which broadens the way to the synthesis of robust OER catalysts derived from ZIF-67.

Integrated doped-Ru electrocatalyst with excellent H adsorption-desorption and active site on hollow tubular structures for boosting efficient hydrogen evolution.

Electrochemical water splitting for hydrogen production is an ideal process for clean energy production. However, highly active and low-cost electrocatalysts are essential and challenging. In this work, a multi-component Cu-based catalyst (Ru-M-C-Cu), synergized with ruthenium (Ru) heteroatom doping, was synthesized via a facile immersion-calcination-immersion method. Based on the cotton biomass substrate, a hollow tubular structure was obtained. By virtue of its distinctive structure and high carbon content, cotton biomass assumed a dual role as a sacrificial template and a reducing agent in the eco-friendly synthesis of electrocatalysts, which was instrumental in the creation of a multi-component system augmented by heteroatom doping. The multi-component system was constructed by in-situ transformation and redox reaction during calcination in an oxygen-free environment. The Ru-M-C-Cu catalyst exhibited a competitive overpotential of 108 mV at a current density of 10 mA cm-2 for alkaline hydrogen evolution reaction (HER). The satisfactory catalytic performance of Ru-M-C-Cu can be attributed to the fact that the Ru-O-Cu catalytic centers enhanced the adsorption and desorption abilities of the Cu-O active sites toward hydrogen. Furthermore, the hollow tubular structure allowed the electrolyte to make full contact with the active sites of the Ru-M-C-Cu catalyst, thus accelerated the HER kinetics. The catalyst showed structural and chemical stability after a 12-hour successive test. Besides, the production cost of Ru-M-C-Cu was significantly reduced by 99.1 % than that of commercial 20 % Pt/C, showing the potential as an alternative catalyst by offering a more accessible and sustainable source. This work provides a new design of sustainable low-budget electrocatalysts with the proposed strategies expected for producing clean and renewable hydrogen energy.

Nickel-based dual single atom electrocatalysts for the nitrate reduction reaction.

Electrochemical nitrate (NO3-) reduction reaction (NO3-RR) to ammonium (NH4+) or nitrogen (N2) provides a green route for nitrate remediation. However, nitrite generation and hydrogen evolution reactions hinder the feasibility of the process. Herein, dual single atom catalysts were rationally designed by introducing Ag/Bi/Mo atoms to atomically dispersed NiNC moieties supported by nitrogen-doped carbon nanosheet (NCNS) for the NO3-RR. Ni single atoms loaded on NCNS (Ni/NCNS) tend to reduce NO3- to valuable NH4+ with a high selectivity of 77.8 %. In contrast, the main product of NO3-RR catalyzing by NiAg/NCNS, NiBi/NCNS, and NiMo/NCNS was changed to N2, giving rise to N2 selectivity of 48.4, 47.1 and 47.5 %, respectively. Encouragingly, Ni/NCNS, NiBi/NCNS, and NiAg/NCNS showed excellent durability in acidic electrolytes, leading to nitrate conversion rates of 70.3, 91.1, and 93.2 % after a 10-h reaction. Simulated wastewater experiments showed that NiAg/NCNS could remove NO3- up to 97.8 % at -0.62 V after 9-h electrolysis. This work afforded a new strategy to regulate the reaction pathway and improve the conversion efficiency of the NO3-RR via engineering the dual atomic sites of the catalysts.

Nanocrystalline transition metal tetraborides as efficient electrocatalysts for hydrogen evolution reaction at the large current density.

While great efforts have been made to improve the electrocatalytic activity of existing materials toward hydrogen evolution reaction (HER), it is also importance for searching new type of nonprecious HER catalysts to realize the practical hydrogen evolution. Herein, we firstly report nanocrystalline transition metal tetraborides (TMB4, TM=W and Mo) as an efficient HER electrocatalyst has been synthesized by a single-step solid-state reaction. The optimized nanocrystalline WB4 exhibits an overpotential as low as 172 mV at 10 mA/cm2 and small Tafel slope of 63 mV/dec in 0.5 M H2SO4. Moreover, the nanocrystalline WB4 outperforms the commercial Pt/C at high current density region, confirming potential applications in industrially electrochemical water splitting. Theoretical study reveals that high intrinsic HER activity of WB4 is originated from its large work function that contributes to the weak hydrogen-adsorption energy. Therefore, this work provides new insights for development of robust nanocrystalline electrocatalysts for efficient HER.

Stable selenium nickel-iron electrocatalyst for oxygen evolution reaction in alkaline and natural seawater.

The development of efficient and stable catalysts for oxygen evolution reaction (OER) in seawater presents a major challenge for hydrogen production through water electrolysis. In this work, we present a stable NiFe foam catalyst with a Se-doped Ni/Fe oxide surface prepared through a combination of chemical vapor deposition and electrochemical exfoliation. This method effectively modifies the surface of the commercial NiFe foam to a rough and stable Se-doped Ni/Fe oxide surface, displaying exceptional OER performance in both freshwater and seawater with more than 54 days stability in natural seawater. Characterizations reveal Ni-Se doped Fe oxide surface, with subsurface layers consisting of Ni alloyed with a moderate concentration of Fe, optimizes the adsorption free energy of oxygen-containing intermediates. Our results demonstrate a surface engineering approach to activate NiFe foam as a robust OER catalyst for seawater electrolysis, which is beneficial for the hydrogen economy and for the environment.

Anchoring Pt single atoms on specific nitrogen vacancies of carbon nitride to accelerate photogenerated carrier transfer.

The anchoring sites of metal single atoms are closely related to photogenerated carrier dynamics and surface reactions. Achieving smooth photogenerated charge transfer through precise design of single-atom anchoring sites is an effective strategy to enhance the activity of photocatalytic hydrogen evolution. In this study, Pt single atoms were loaded onto ultra-thin carbon nitride with two-coordination nitrogen vacancies (VN2c-UCN-Pt) and ultra-thin carbon nitride with three-coordination nitrogen vacancies (VN3c-UCN-Pt). This paper investigated the photocatalytic hydrogen evolution performance and photogenerated carrier behavior of Pt single atoms at different anchoring sites. Surface photovoltage measurements indicated that VN2c-UCN-Pt exhibits a superior carrier separation efficiency compared to VN3c-UCN-Pt. More importantly, the surface photovoltage signal under the presence of H2O molecules revealed a significant decrease. Theoretical calculations suggest that VN2c-UCN-Pt exhibits superior capabilities in adsorbing and activating H2O molecules. Consequently, the photocatalytic hydrogen evolution efficiency of VN2c-UCN-Pt reaches 1774 µmol g-1h-1, which is 1.8 times that of VN3c-UCN-Pt with the same Pt loading. This work emphasized the structure-activity relationship between single-atom anchoring sites and photocatalytic activity, providing a new perspective for designing precisely dispersed single-atom sites to achieve efficient photocatalytic hydrogen evolution.