Enhancing the Electrocatalytic Oxidation of 5-Hydroxymethylfurfural Through Cascade Structure Tuning for Highly Stable Biomass Upgrading.

Electrocatalytic 5-hydroxymethylfurfural oxidation reaction (HMFOR) provides a promising strategy to convert biomass derivative to high-value-added chemicals. Herein, a cascade strategy is proposed to construct Pd-NiCo2O4 electrocatalyst by Pd loading on Ni-doped Co3O4 and for highly active and stable synergistic HMF oxidation. An elevated current density of 800 mA cm-2 can be achieved at 1.5 V, and both Faradaic efficiency and yield of 2,5-furandicarboxylic acid remained close to 100% over 10 consecutive electrolysis. Experimental and theoretical results unveil that the introduction of Pd atoms can modulate the local electronic structure of Ni/Co, which not only balances the competitive adsorption of HMF and OH- species, but also promote the active Ni3+ species formation, inducing high indirect oxidation activity. We have also discovered that Ni incorporation facilitates the Co2+ pre-oxidation and electrophilic OH* generation to contribute direct oxidation process. This work provides a new approach to design advanced electrocatalyst for biomass upgrading.

Built-in electric field in NiO-CuO heterostructures to regulate the hydroxide adsorption sites for 5-hydroxymethylfurfural electrooxidation assisted hydrogen production.

The development of catalysts with suitable adsorption behavior for the reaction molecules and the elucidation of their internal structure-adsorption-catalytic activity relationships are crucial for the electrooxidation of 5-hydroxymethylfurfural (HMF). In this work, NiO-CuO heterostructures with a spontaneous built-in electric field (BEF) are specifically designed and used to regulate the OH- adsorption site for freeing up the active site of HMF for the HMF oxidation reaction (HMFOR). The mechanism driving electron pumping/accumulation of the BEF is examined by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Electrochemical data and theoretical calculations show that BEF modulates the adsorption energy and adsorption site of substrate molecules, thereby enhancing the performance of HMFOR and hydrogen evolution reaction (HER). Notably, the NiO-CuO electrode demonstrates high 2,5-Furandicarboxylic acid (FDCA) selectivity (99.76 %) and generation rate (13.79 mmol gcat-1 h-1). It only requires 1.33 V to obtain a current density of 10 mA cm-2 for HMFOR-coupled H2 evolution. This research introduces a novel approach by regulating the adsorption of reactive molecules for HMFOR-assisted H2 evolution.

Highly Effective Non-Noble MnO2 Catalysts for 5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid.

Noble metal-free catalyst or catalytic oxidation of 5-hydroxymethylfurfural into 2,5-furandicarboxylic acid are proposed in this study as a proposal to solve one of the great disadvantages of this reaction of using preferably noble metal-based catalysts. The catalytic activity of six MnO2 crystal structures is studied as alternative. The obtained results showed a strong connection between catalytic activity the type of MnO2 structure organization and redox behavior. Among all tested catalysts, ϵ-MnO2 showed the best performance with an excellent yield of 74 % of 2,5-furandicarboxylic acid at full -hydroxymethylfurfural conversion.

Enhancing Low-Potential Electrosynthesis of 2,5-Furandicarboxylic Acid on Monolithic CuO by Constructing Oxygen Vacancies.

Electrosynthesis of 2,5-furandicarboxylic acid (FDCA) from the biomass-derived 5-hydroxymethylfurfural (HMF) is one of the most potential means to produce a bioplastic monomer. Copper oxide (CuO) catalyst shows promising prospects due to its high surface activity, conductivity, and stability, but relatively poor capability of oxygen evolution; however, the weak adsorption of substrates and the lack of facile synthetic strategies largely restrict its practical application. Here, a novel facile in situ method, alternate cycle voltammetry (denoted as c) and potentiostatic electrolysis (denoted as p), was proposed to prepare a monolithic cpc-CuO/Cu-foam electrocatalyst. Along with the increment of CuO and its surficial oxygen vacancies (OV), the FDCA yield, productivity, and Faradaic efficiency can reach up to ∼98.5%, ∼0.2 mmol/cm2, and ∼94.5% under low potential of 1.404 VRHE. Such an efficient electrosynthesis system can be easily scaled up to afford pure FDCA powders. In a combinatory analysis via electron paramagnetic resonance spectroscopy, H2 temperature-programmed reduction, open circuit potential, infrared spectroscopy, zeta potential, electrochemical measurement, and theoretical calculation, we found that the CuO was the active phase and OV generated on CuO surface can dramatically enhance the adsorption of *HMF and *OH (* denotes an active site), accounting for its superior FDCA production. This work offers an excellent paradigm for enhancing biomass valorization on CuO catalysts by constructing surficial defects.

Self-Reconstruction of Sulfate-Terminated Copper Oxide Nanorods for Efficient and Stable 5-Hydroxymethylfurfural Electrooxidation.

The electrochemical 5-hydroxymethylfurfural oxidation reaction (HMFOR) has been regarded as a viable alternative to sustainable biomass valorization. However, the transformation of the catalysts under harsh electrooxidation conditions remains controversial. Herein, we confirm the self-construction of cuprous sulfide nanosheets (Cu2S NSs) into sulfate-terminated copper oxide nanorods (CuO-SO42- NRs) during the first-cycle of the HMFOR, which achieves a near-quantitative synthesis of 2,5-furandicarboxylic acid (FDCA) with a >99.9% yield and faradaic efficiency without deactivation in 15 successive cycles. Electrochemical impedance spectroscopies confirm that the surface SO42- effectively reduces the onset potential for HMFOR, while in situ Raman spectroscopies identify a reversible transformation from CuII-O to CuIII-OOH in HMFOR. Furthermore, density functional theory calculations reveal that the surface SO42- weakens the Cu-OH bonds in CuOOH to promote the rate-determining step of its coupling with the C atom in HMF-H* resulting from HMF hydrogenation, which synergistically enhances the catalytic activity of CuO-SO42- NRs toward HMF-to-FDCA conversion.

MOF Material-Derived Bimetallic Sulfide CoxNiyS for Electrocatalytic Oxidation of 5-Hydroxymethylfurfural.

The electrocatalytic conversion of biomass into high-value-added chemicals is one of the effective methods of green chemistry. Conventional metal catalysts have disadvantages, such as low atomic utilization and small surface areas. Catalyst materials derived from metal-organic frameworks (MOFs) have received much attention due to their unique physicochemical properties. Here, an MOF-derived non-precious metal CoxNiyS electrocatalyst was applied to the oxidation of biomass-derivative 5-hydroxymethylfurfural (HMF). The HMF oxidation reaction activities were modulated by regulating the content of Co and Ni bimetals, showing a volcano curve with an increasing proportion of Co. When the Co:Ni ratio was 2:1, the HMF conversion rate reached 84.5%, and the yield of the main product, 2,5-furandicarboxylic acid (FDCA), was 54%. The XPS results showed that the presence of high-valent nickel species after electrolysis, which further proved the existence and reactivity of NiOOH, as well as the synergistic effect of Co and Ni promoted the conversion of HMF. Increasing the content of Ni could increase the activity of HMF electrochemical oxidation, and increasing the content of Co could reduce the increase in the anodic current. This study has important significance for designing better HMF electrochemical catalysts in the future.

Bifunctional bimetallic oxide nanowires for high-efficiency electrosynthesis of 2,5-furandicarboxylic acid and ammonia.

It is an appealing avenue for electrosyntheis of high-valued chemicals at both anode and cathode by coupling 5-hydroxymethylfurfural (HMF) oxidation and nitrate reduction reactions simultaneously, while the development such bifunctional electrocatalysts is still in its infancy with dissatisfied selectivity and low yield rate. Here, we first report that Zn-doped Co3O4 nanowires array can be served as an efficient and robust dual-functional catalyst for HMF oxidation and nitrate reduction at ambient conditions. Specifically, the catalyst shows a faradaic efficiency of 91 % and a yield rate of 241.2 µmol h-1 cm-2 for 2,5-furandicarboxylic acid formation together with a high conversion of nearly 100 % at a potential of 1.40 V. It also displays good cycling stability. Besides, the catalyst is capable of catalyzing the reduction of nitrate to NH3, giving a maximal faradaic efficiency of 92 % and a peak NH3 yield rate of 4.65 mg h-1 cm-2 at a potential of -0.70 V. These results surpass those obtained using pristine Co3O4 and are comparable to those of state-of-the-art electrocatalysts. Moreover, the catalyst is further employed as the cathode catalyst to assemble a Zn-nitrate battery, giving a peak power density of 5.24 mW cm-2 and a high yield rate of 0.72 mg h-1 cm-2. Theoretical simulations further reveal that Zn-doping favors the adsorption and dissociation of nitrate and HMF species and reduces the energy barrier as well. Our work demonstrates the potential interest of Co3O4-based materials for the highly selective production of valuable feedstocks via ambient electrolysis.

S-Species-Evoked High-Valence Ni2+ δ of the Evolved ß-Ni(OH)2 Electrode for Selective Oxidation of 5-Hydroxymethylfurfural.

An efficient NiSx -modified ß-Ni(OH)2 electrode is reported for the selective oxidation reaction of 5-hydroxymethylfurfural (HMFOR) with excellent electrocatalytic 5-hydroxymethylfurfural (HMF) selectivity (99.4%), conversion (97.7%), and Faradaic efficiency (98.3%). The decoration of NiSx will evoke high-valence Ni2+ δ species in the reconstructed ß-Ni(OH)2 electrode, which are the real active species for HMFOR. The generated NiSx /Ni(OH)O modulates the proton-coupled electron-transfer (PCET) process of HMFOR, where the electrocatalytically generated Ni(OH)O can effectively trap the protons from the CHO end in HMF to realize electron transfer. The oxygen evolution reaction (OER) competes with the HMFOR when NiSx /Ni(OH)O continues to accumulate, to generate the NiSx /NiOx (OH)y intermediate. Density functional theory (DFT) calculations and experimental results verify that the adsorption energy of HMF can be optimized through the increased NiSx composition for more efficient capture of protons and electrons in the HMFOR.

Surface engineering of carbon-coated cobalt-doped nickel phosphides bifunctional electrocatalyst for boosting 5-hydroxymethylfurfural oxidation coupled with hydrogen evolution.

Multiple surface/interface engineering is an effective approach to develop efficient electrocatalysts for promoting the practical application of electrocatalysis and achieving carbon neutrality. Herein, a deep eutectic liquid precursor containing phosphorus was designed. The self-supported three-dimensional (3D) cobalt-doped Ni12P5/Ni3P nanowire networks coated with a thin layer of carbon (Co-NixP@C) were prepared by using an in-situ one-step pyrolysis method. The as-obtained Co-NixP@C hybrid possesses a superaerophobic/superhydrophilic surface, which could promote electrolyte diffusion and enhance bubble release. Density functional theory (DFT) calculations reveal that Co-doping in NixP@C can promote the adsorption and activation of 5-hydroxymethylfurfural (HMF) molecules, and optimize the energy barrier of H* absorption. The self-supported Co-NixP@C was used as an efficient bifunctional electrocatalyst for HMF oxidation coupled with hydrogen evolution reaction (HER) in a 1.0 M KOH solution. A nearly 100 % yield of 2,5-furandicarboxylic acid (FDCA) was achieved. The self-supported Co-NixP@C displayed high activity and stability for both HER and HMF conversion. The HMF oxidation coupled with HER can be efficiently driven by a 1.5 V commercial photovoltaic panel under sunlight. This study lays the foundation for large-scale industrialization in sustainable fine-chemical and energy engineering.