Low Driving Voltage Electroluminescence Device for Integrated Visual Strain Sensing.

As a pivotal component in human-machine interactions, display devices have undergone rapid development in modern life. Displays such as alternative current electroluminescence|alternative current electroluminescent (ACEL) devices with high flexibility and long operational lifetimes are essential for wearable electronics. However, ACEL devices are constrained by their inherent high driving voltage and complex fabrication processes. Our work presents an easy blade-coating method for fabricating flexible ACEL display devices based on an all-solution process. By dispersing BaTiO3 and ZnS/Cu powder into waterborne polyurethane, we successfully combined dielectric and fluorescence functionalities within a single layer, significantly reducing the device's driving voltage. Additionally, the ionic conducting hydrogel was chosen as a transparent electrode to achieve good electrical contact and strong interfacial adhesion through in situ polymerization. Owing to the unique method, our ACEL device exhibits high flexibility, low driving voltage (20-100 V), high brightness (300+ cd/m2 at 60 V), and environmental friendliness. Furthermore, by repurposing the hydrogel electrode, we integrated strain visualization capabilities within a single device, highlighting its potential for applications such as wearable healthcare monitoring.

Autonomous Electroluminescent Textile for Visual Interaction and Environmental Warning.

Visual interaction is a promising strategy for the externalized expression and transmission of information, having wide application prospects in wearable luminous textiles. Achieving an autonomous luminous display and dynamic light response to environmental stimuli is attractive but attracts little attention. Herein, we propose a liquid responsive structure based on alternating-current electroluminescent fibers and demonstrate conductive-liquid-bridging electroluminescent fabrics with high integration and personalized patterns. Impressively, our electroluminescent fibers and textiles could afford a sensitive response and high robustness to water, glycerol, ethanol, and sodium chloride solution. The final electroluminescent textiles show an excellent luminescence performance of 149.08 cd m-2. On the proof of concept, a rain-sensing umbrella, luminous sportswear, and liquid response glove are fabricated to demonstrate water detection, visual interaction, and environmental warning. The textile-type visualizing-responding strategy proposed in this work may open up new avenues for the application of ACEL devices in the field of visual interaction.

Thermally Laminated Lighting Textile for Wearable Displays with High Durability.

Textile-based light-emitting devices are attracting more and more attention because of their potential applications in smart clothing, human-computer interfaces, safety warnings, entertainment fashion, etc. However, simple and efficient manufacturing of luminescent devices on fabrics even clothing with excellent stretchability and washability remains challenging. Here, a solvent-free thermal lamination process combined with laser engraving has been proposed to fabricate electroluminescent (EL) devices on textiles. All the preprepared components, such as the bottom electrode, the EL layer, and the top transparent electrode, were thermally laminated on the surface of textiles employing thermoplastic polyurethane (TPU) as the binding matrix. The stretchability, luminance, and interface adhesion of the EL devices were systematically studied, showing excellent mechanical durability at high temperature, in humid environments, withstanding repeated machine washing, and resistant to various forms of physical damage. As a demonstration of potential application, textile-based EL devices were fabricated, which could display colored and pixelated patterns as well as dynamic images. The thermal lamination technology developed in this work can potentially enable people to DIY (do it yourself) fabricate light-emitting devices on clothing using daily tools, which could facilitate the widespread use of textile-based wearable displays.

Dual functions of alternating current electroluminescent device for light emission and humidity detection.

Alternating current electroluminescent (AC-EL) device can be considered as a potential candidate for next generation of multifunctional light-emitting sources. In this work, we present a new design of AC-EL device with inclusion of a silver oxide humidity-sensing layer instead of an insulating buffer layer for humidity detection. The ZnS:Cu, Cl and ZnS:Ag+(Zn,Cd)S:Ag phosphors were used as an emissive layer prepared by screen printing method. The silver oxide (AgO/Ag2O) nanoparticles synthesized via a green method were employed as a humidity sensing layer. The developed AC-EL devices exhibited high response, good productivity, high stability, high repeatability and linear relationship with humidity in range of 10%-90% RH as well as no significant effects with several VOCs/gases such as NH3, CO2, acetone, methanol, toluene and propan at room temperature. The effects of parameters such as excitation frequency, applied voltage, and waveforms on the luminance intensity are discussed. The development of the present AC-EL device offers a simplified architecture to enable sensing functions of the AC-EL device via monitoring of light emission changing.

Paper-Based ZnS:Cu Alternating Current Electroluminescent Devices for Current Humidity Sensors with High-Linearity and Flexibility.

Humidity sensors are indispensable for various electronic systems and instrumentations. To develop a new humidity sensing mechanism is the key for the next generation of sensor technology. In this work, a novel flexible paper-based current humidity sensor is proposed. The developed alternating current electroluminescent devices (ACEL) consist of the electroless plating Ni on filter paper and silver nanowires (AgNWs) as the bottom and upper electrodes, and ZnS:Cu as the phosphor layer, respectively. The proposed humidity sensor is based on ACEL with the paper substrate and the ZnS:Cu phosphor layer as the humidity sensing element. The moisture effect on the optical properties of ACELs has been studied firstly. Then, the processing parameters of the paper-based ACELs such as electroless plated bottom electrode and spin-coated phosphor layer as a function of the humidity-sensitive characteristics are investigated. The sensing mechanism of the proposed sensor has been elucidated based on the Q ~ V analysis. The sensor exhibits an excellent linearity ( R 2 = 0.99965 ) within the humidity range from 20% to 90% relative humidity (RH) and shows excellent flexibility. We also demonstrate its potential application in postharvest preservation where the EL light is used for preservation and the humidity can be monitored simultaneously through the current.

Cloning and functional characterization of the gene encoding the transcription factor Acel in the basidiomycete Phanerochaete chrysosporium

In this report we describe the isolation and characterization of a gene encoding the transcription factor Acel (Activation protein of cup 1 Expression) in the white rot fungus Phanerochaete chrysosporium. Pc-acel encodes a predicted protein of 633 amino acids containing the copper-fist DNA binding domain typically found in fungal transcription factors such as Acel, Macl and Haal from Saccharomyces cerevisiae. The Pc-acel gene is localized in Scaffold 5, between coordinates 220841 and 222983. A S. cerevisiae acel null mutant strain unable to grow in high-copper medium was fully complemented by transformation with the cDNA of Pc-acel. Moreover, Northern blot hybridization studies indicated that Pc-acel cDNA restores copper inducibility of the yeast cup 1 gene, which encodes the metal-binding protein metallothionein implicated in copper resistance. To our knowledge, this is first report describing an Acel transcription factor in basidiomycetes.