Aniline tetramer conjugated N-doped graphene aerogel enabling efficient pH-universal aqueous supercapacitors.

The development of novel negative electrode (anode) materials for efficient aqueous supercapacitors (SCs) remains appealing yet significantly challenging. Here we propose an aniline tetramer conjugated nitrogen-doped graphene aerogel (AT-NGA) as the anode material, exhibiting a maximum capacitance of 699.1F g-1 under 1 A/g in 1 M H2SO4 as well as a long lifespan of 6,000 cycles at all pH levels. In particular, its capacitive contribution is 94.1 %, superior to the best pseudocapacitive materials known. To evaluate its pH-universality, we assembled three asymmetric SCs, namely, AT-NGA//1 M H2SO4//graphene aerogel, AT-NGA//1 M Na2SO4//NaMnO2-x and AT-NGA//1 M KOH//NiCoFe layered double hydroxide. The acid device delivers maximal energy and power densities of 35.8 mWh g-1 and 13.0 W/g, the neutral device achieves a maximal energy and power densities of 71.8 mWh g-1 and 33.0 W/g, and the base device exhibits a maximal energy and power densities of 48.2 mWh g-1 and 18.0 W/g, respectively. All the SCs display an outstanding cycling performance over 5,000 cycles (especially, 96 % capacitance retention for the acidic device after 12,000 cycles). Our design can also be expanded to prepare other redox-active anode materials for efficient aqueous SC applications.

Highly efficient catalytic transfer hydrogenation for the conversion of nitrobenzene to aniline over PdO/TiO2: The key role of in situ switching from PdO to Pd.

The reduction of nitrobenzene to aniline is very important for both pollution control and chemical synthesis. Nevertheless, difficulties still remain in developing a catalytic system having high efficiency and selectivity for the production of aniline. Herein, it was found that PdO nanoparticles highly dispersed on TiO2 support (PdO/TiO2) functioned as a highly efficient catalyst for the reduction of nitrobenzene in the presence of NaBH4. Under favorable conditions, 95% of the added nitrobenzene (1 mmol/L) was reduced within 1 min with an ultra-low apparent activation energy of 10.8 kJ/mol by using 0.5%PdO/TiO2 as catalysts and 2 mmol/L of NaBH4 as reductants, and the selectivity to aniline even reached up to 98%. The active hydrogen species were perceived as dominant species during the hydrogenation of nitrobenzene by the results of isotope labeling experiments and ESR spectroscopic. A mechanism was proposed as follows: PdO activates the nitro groups and leads to in-situ generation of Pd, and the generated Pd acts as the reduction sites to produce active hydrogen species. In this catalytic system, nitrobenzene prefers to be adsorbed on the PdO nanoparticles of the PdO/TiO2 composite. Subsequently, the addition of NaBH4 results in in-situ generation of a Pd/PdO/TiO2 composite from the PdO/TiO2 composite, and the Pd nanoclusters would activate NaBH4 to generate active hydrogen species to attack the adsorbed nitro groups. This work will open up a new approach for the catalytic transfer hydrogenation of nitrobenzene to aniline in green chemistry.

ZnO Nanorods Aligned in a Vertical Configuration for Targeted Electrochemical Detection of Aniline.

This study demonstrates the synthesis of 1D surface vertically aligned nanorods of ZnO on the fluorine-doped tin oxide-coated glass substrate (ZnO-VANRs/FTOs) synthesized via a chemical route for the targeted electrochemical sensing of aniline. The ZnO-VANRs/FTOs were 1.57 ± 0.03 µm in length with excellent crystallinity and high density (1.52 × 1013 rod no./m2). ZnO-VANRs formation increased surface roughness by 2.4- and 4.7-fold compared to the bare FTOs and seeded FTOs (ZnO-seed/FTOs), respectively. The ZnO-VANRs/FTOs electrodes could increase the effective surface area from 0.154 to 0.384 cm2 with about 86.85% reduction in charge transfer resistance compared to the bare FTOs. The peak current response (at 0.281 V vs Ag/AgCl) of aniline deposition was boosted by 81.52% with the rise in temperature from 15 to 45 °C. The reduction of aniline at ZnO-VANRs/FTOs involved a reversible two-electron diffusion control process with a heterogeneous reaction rate constant (k0) of 1.82 s-1 and a formal potential (E0) of 0.289 V vs Ag/AgCl. The ZnO-VANRs/FTOs electrode showed limits of detection of 0.193 µM (sensitivity 0.198 µA·µM-1·cm-2) and 0.588 µM (sensitivity of 0.065 µA·µM-1·cm-2) between the working ranges of 0-20 and 20-160 µM, respectively. The fabricated sensor was unprecedently selective toward aniline sensing, and p-nitroaniline, chlorobenzene, chlorpyrifos, Cu2+, Pb2+, Ni2+, Cd2+, albumin bovine, Escherichia coli, and ciprofloxacin could not interfere with aniline sensing and its sensitivity. However, the peak current was marginally decayed by 2.63% up to the 6th cycle. Moreover, ZnO-VANRs/FTOs catalyzed the sensing of aniline spiked in the environmental matrices, conforming well to liquid chromatography.

Tetra aniline-based polymers ameliorate BPA-induced cardiotoxicity in Sprague Dawley rats, in silico and in vivo analysis.

AIMS: Bisphenol A (BPA), xenoestrogen, is an environmental toxicant, that generates oxidative stress leading to cardiotoxicity. The oxidative stress can be neutralized by natural and synthetic antioxidants. The present study elucidates the highly selective antioxidative potential of synthetic tetra aniline polymers Es-37 and L-37 against Bisphenol A-induced cardiac cellular impairments and the role of miRNA-15a-5p in the regulation of different apoptotic proteins. MATERIALS AND METHODS: The molecular docking of L-37 and Es-37 with three proteins (p53, Cytochrome c, and Bcl-2) were performed. The dose of 1 mg/kg BW of BPA, 1 mg/kg BW Es-37 and L-37 and 50 mg/kg BW N-acetyl cysteine (NAC) was administered to Sprague Dawley rats. The miRNA and target gene expression were confirmed by qRt-PCR and Immunoblotting. KEY FINDINGS: In our results, BPA administration significantly elevated the reactive oxygen species (ROS), p53, cytochrome c, and particularly miRNA-15a-5p expression; however: these changes were notably reversed by Es-37 and L-37 treatment. Additionally, molecular docking of synthetic polymers validated that L-37 has a greater binding affinity with the target proteins compared to Es-37, with the highest binding values reported for the enzymatic protein cytochrome c. SIGNIFICANCE: These results suggest that both synthetic polymers Es-37 and L-37 have the potential to scavenge free radicals, boost-up antioxidant enzyme activities, and avert (BPA-induced) toxicity, thus, may serve as cardioprotective agents. Moreover, this study first time proposes that miRNA-15a-5p overexpression is associated with oxidative stress and coincides with BPA induced cardiotoxicity, thus may serve as potential therapeutic target in future.

Predicting pKa Values of Para-Substituted Aniline Radical Cations vs. Stable Anilinium Ions in Aqueous Media.

The focus of pKa calculations has primarily been on stable molecules, with limited studies comparing radical cations and stable cations. In this study, we comprehensively investigate models with implicit solvent and explicit water molecules, direct and indirect calculation approaches, as well as methods for calculating free energy, solvation energy, and quasi-harmonic oscillator approximation for para-substituted aniline radical cations (R-PhNH2•+) and anilinium cations (R-PhNH3+) in the aqueous phase. Properly including and positioning explicit H2O molecules in the models is important for reliable pKa predictions. For R-PhNH2•+, precise pKa values were obtained using models with one or two explicit H2O molecules, resulting in a root mean square error (RMSE) of 0.563 and 0.384, respectively, for both the CBS-QB3 and M062X(D3)/ma-def2QZVP methods. Further improvement was achieved by adding H2O near oxygen-containing substituents, leading to the lowest RMSE of 0.310. Predicting pKa values for R-PhNH3+ was more challenging. CBS-QB3 provided an RMSE of 0.349 and the M062X(D3)/ma-def2QZVP method failed to calculate pKa accurately (RMSE > 1). However, by adopting the double-hybrid functional method and adding H2O near the R substituent group, the calculations were significantly improved with an average absolute difference (ΔpKa) of 0.357 between the calculated and experimental pKa values. Our study offers efficient and reliable methods for pKa calculations of R-PhNH2•+ (especially) and R-PhNH3+ based on currently mature quantum chemistry software.

Catalytic conversion of soluble aniline into insoluble N-phenylphenazine for wastewater treatments.

Aniline, a common pollutant in industrial wastewater, requires an effective treatment method with minimal chemical usage. In this study, a two-stage catalytic oligomerization process has been developed to address this issue by converting soluble aniline into insoluble oligomers for wastewater treatment. In the first stage, aniline is oxidized using hydrogen peroxide (H2O2) and a green catalyst, iron tetraamido macrocyclic ligand (Fe-TAML) to form aniline tetramers or pentamers. In the second stage, these oligoanilines undergo further oxidation with H2O2 alone at a higher temperature, resulting in the formation of N-phenylphenazine or its derivatives. These macrocyclic compounds precipitate from the wastewater due to π- π stacking, allowing easy separation through decantation or gravity filtration. After process optimization, only 3 mg/L of Fe-TAML and 2 g/L of H2O2 are required to treat 1 g/L of aniline, achieving a remarkable 96.8% aniline removal efficiency and a 62.5% precipitate yield. This two-stage oxidation approach shows promise for treating aniline and similar aromatic compounds in real industrial wastewater.

Effects of flotation reagents with aniline aerofloat and ammonium dibutyl dithiophosphate on a constructed rapid infiltration system: Performance and microbial metabolic pathways.

Aniline aerofloat (AAF) and ammonium dibutyl dithiophosphate (ADD) are the key flotation reagents in mineral processing. This study investigated the performance of the constructed rapid infiltration systems with coke and red mud as adsorbents for treatment AAF and ADD wastewater. Meanwhile, the effects of AAF and ADD on the microbial metabolic pathways of the systems were unraveled. Results showed that the AAF concentration in influent was 25 mg/L, which promoted chemical oxygen demand (COD) and total phosphorus (TP) removal of the A column (coke) and B column (red mud). While the COD and TP removal of the C column (coke) and D column (red mud) were inhibited with ADD concentration increasing to 50 mg/L and 100 mg/L. The AAF reduced the binding energy of coke C-O bond by 0.9 eV, and down-regulated the C-C bond ratio by 40.72%. The dominant phyla in the columns were Pseudomonadota and Actinomycetota. The pore structure of coke was more conducive to the growth of the Pseudomonadota, while the metal composition of red mud was more conducive to the redox reaction of microorganisms. The presence of phosphofructokinase (2.7.1.11)-related genes was up-regulated in column C compared to other columns. The ADD was beneficial to the expression of norC and nosZ functional genes during nitrogen metabolism process. In contrast, phosphorus metabolism genes were more expressed in the red mud column for treatment AAF wastewater. This study reveals the potential of coke and red mud for the treatment of flotation reagents wastewater, while providing a theoretical basis for the optimal selection of filler types in the constructed rapid infiltration systems.

Heterocycle-guided synthesis of m-hetarylanilines via three-component benzannulation.

A one-pot three-component synthesis of substituted meta-hetarylanilines from heterocycle-substituted 1,3-diketones has been developed. The electron-withdrawing power of the heterocyclic substituent (which can be estimated on the basis of calculated Hammett constants) in the 1,3-diketone plays a pivotal role in the studied reaction. The series of meta-hetarylanilines prepared (21-85% isolated yield) demonstrates the synthetic utility of the developed method.

Unpuzzling spatio-vertical and multi-media patterns of aniline accelerators/antioxidants in an urban estuary.

Aniline accelerators and antioxidants (AAs) are high-production-volume industrial additives that have recently attracted emerging concern given their ubiquity in environmental compartments and the associated (eco)toxic effects. Nonetheless, available information on the multi-media behavior of AAs and their transformation products (TPs) remains scarce. Therefore, we determined the residues of twenty-four AA(TP)s in paired dissolved phases (i.e., filtered water), suspended particulate matter (SPM), and sediment samples collected from the Yangtze River Estuary (YRE), a highly urbanized estuary in the East China. The median total concentrations of targeted compounds were 0.73 ng/g dw, 34.4 ng/L, and 39.6 ng/L in sediments, surface and bottom water, respectively. Diphenylamine (DPA) was the most abundant congener in SPM, while 1,3-diphenylguanidine (DPG) and dicyclohexylamine (DChA) dominated in the dissolved phases and sediments. Various anthropogenic emissions and (a)biotic degradation may collectively shape the matrix-specific accumulation patterns and spatial trends of these compounds across the YRE. However, the vertical patterns of AA(TP)s were obscure, probably due to the estuarine hydrodynamics and/or the modest sample size. The SPM fractions of AA(TP)s in water (Ф: 7.9-100%) and the sediment sorption coefficients (KOC: 0.01-6.56) both positively correlated with their hydrophobicity as indicated by the octanol-water partition coefficient (KOW). Moreover, risk quotients implied moderate to high aquatic toxicity posed by several AA(TP)s at certain YRE sites. The estimated total annual fluxes of our analytes transported via water and sediments towards the East China Sea were 5.90-365.5 tons and 4.23-1,100 kg, respectively. This work provides a systematic investigation of multi-media processes and ecological risks of AA(TP)s in a highly-urbanized estuary, contributing to holistic comprehension of these emerging contaminants in estuarine environments.

Poly(ether imide) Film Doped with Protonated Tetra(aniline) Molecules for Efficiently Enhancing the Capacitive Energy Storage Performance.

The polymer dielectric spacer plays a key role in the performance of film capacitors. However, currently, commercial polymer dielectric films generally have low relative dielectric constants (<4) and low capacitive energy storage densities (<3 J cm-3). Here, we report the use of protonated tetra(aniline) (TANI) molecules with a length of 1.3 nm to improve the energy storage performance of poly(ether imide) (PEI) films. With only a small content of TANI doping, i.e., 0.7 wt %, both the dielectric constant and energy storage density of PEI film can be significantly improved, while the dielectric loss remains as low as that of pure PEI. A maximum energy density of 9.4 J cm-3 is achieved. To manifest the efficacy of protonated TANI, polyaniline and deprotonated TANI are also prepared and used as dopants in PEI. The PANI filler can also increase the dielectric constant, while the dielectric loss is increased as well. The deprotonated TANI doped in PEI has no influence on both the dielectric constant and energy density, implying that the protonated amino groups of TANI molecules are responsible for the enhanced dielectric constant of the PEI/TANI composite. The correlation between protonation of TANI dopants and dielectric properties is discussed in detail.

Synergistic approach of GCW-ISTR for enhanced remediation of semi-volatile organic contaminants in groundwater: Modeling and experimental validation.

The poor remediation performance of groundwater circulation well (GCW) on semi-volatile organic contaminants (such as aniline) has severely limited its practical application. To address the challenges posed by the low volatility and solubility of these contaminants, an innovative integration of GCW with in-situ thermal remediation (ISTR) was proposed to create a thermal enhanced circulation well (GCW-ISTR) in this study. Laboratory experiments and model simulations were performed to evaluate the heat transfer and enhanced remediation effect by GCW-ISTR. Results demonstrate that the heat transfer process is controlled by the water circulation around GCW-ISTR and is influenced by factors such as aeration flow rate, groundwater velocity and aquifer permeability. Heating area is directly proportional to the seepage velocity of groundwater which can be analyzed by multiplying the water head difference between the upper and lower screens with the aquifer permeability. Therefore, the heat transfer model, based on Darcy's seepage theory and the energy conservation equation, effectively simulates the heat transfer with an error margin of less than 10%. Compared to individual GCW, GCW-ISTR exhibits a 25.8% improvement in aniline remediation efficiency, resulting in a decrease in the average concentration from 97.95 mg/L to 0.168 mg/L within 48 h, effectively mitigating the occurrence of tailing phenomena. This study provides a feasible method of enhancing the remediation of GCW on semi-volatile contaminants and is anticipated to broaden the applicability of GCW in site application.

A new perspective on contaminants as "activators": Aromatic amine groups promoted degradation of tetracycline by ferrate(VI).

Occasionally, our group found that the degradation of tetracycline by ferrate(VI) could be promoted by four co-exist contaminants, containing aromatic amines (ofloxacin, diatrizoic acid, sulfadiazine and alachlor). This study investigated the promotion of aromatic amine groups on tetracycline degradation by ferrate(VI) by using aniline as a model compound. The results implied that the presence of aniline increased the degradation rate of tetracycline by 2.76 times, and the enhancement was weakened gradually with the decrease of pH from 10 to 7.5. The generation of Fe(IV) and·OH by the reaction between ferrate(VI) and aniline was proposed to enhance the degradation of tetracycline, supported by quenching experiments, electron paramagnetic resonance (EPR) and theoretical calculations. A positive correlation was found between the rate constant of tetracycline degradation and the electron-donating ability of the substituted amines (quantified by the Hammett substituent constants). In addition, the degradation of tetracycline was remarkably inhibited by HA and some inorganic ions such as NO3-, SO42-, Cl-, Ca2+, and Mg2+, and the inhibition also happened in the Songhua River water and the secondary effluent. The present study provided an insight into the complex oxidation process for the degradation of micropollutants containing aromatic amine by ferrate in water treatment.

Halogenation of Anilines: Formation of Haloacetonitriles and Large-Molecule Disinfection Byproducts.

Aniline-related structures are common in anthropogenic chemicals, such as pharmaceuticals and pesticides. Compared with the widely studied phenolic compounds, anilines have received far less assessment of their disinfection byproduct (DBP) formation potential, even though anilines and phenols likely exhibit similar reactivities on their respective aromatic rings. In this study, a suite of 19 aniline compounds with varying N- and ring-substitutions were evaluated for their formation potentials of haloacetonitriles and trihalomethanes under free chlorination and free bromination conditions. Eight of the aniline compounds formed dichloroacetonitrile at yields above 0.50%; the highest yields were observed for 4-nitroaniline, 3-chloroaniline, and 4-(methylsulfonyl)aniline (1.6-2.3%). Free bromination generally resulted in greater haloacetonitrile yields with the highest yield observed for 2-ethylaniline (6.5%). The trihalomethane yields of anilines correlated with their haloacetonitrile yields. Product analysis of aniline chlorination by liquid chromatography-high-resolution mass spectrometry revealed several large-molecule DBPs, including chloroanilines, (chloro)hydroxyanilines, (chloro)benzoquinone imines, and ring-cleavage products. The product time profiles suggested that the reaction pathways include initial ring chlorination and hydroxylation, followed by the formation of benzoquinone imines that eventually led to ring cleavage. This work revealed the potential of aniline-related moieties in micropollutants as potent precursors to haloacetonitriles and other emerging large-molecule DBPs with the expected toxicity.

Rapid detection of guttae area using aniline blue staining in Fuchs endothelial corneal dystrophy mouse model.

Fuchs endothelial corneal dystrophy (FECD) is a leading cause of corneal endothelial degeneration resulting in impaired visual acuity. Excessive deposition of extracellular matrix (guttae) on Descemet's membrane (DM) is the hallmark of FECD. We sought to detect the guttae area rapidly using aniline blue (AB) staining in FECD mouse model. FECD mouse model was established via ultraviolet A (UVA) exposure. Masson's trichrome staining was utilized to stain the corneal sections. AB staining was utilized to stain both whole cornea tissues and stripped Descemet's membrane-endothelium complex (DMEC) flat mounts, while immunofluorescence staining of collagen I was employed to stain guttae areas. In Masson's trichrome staining, corneal collagen fibrils were stained blue with AB. The DMEC flat mounts were stained into relative dark blue areas and relative light blue areas using 2% AB staining. The areas of dark blue could almost overlap with collagen I-positive areas, and have an acellular centre and a moderately distinct boundary line with the surrounding corneal endothelial cells. In conclusion, AB staining is a rapid and effective method for the evaluation of the guttae areas in the FECD mouse model.

Anilines Formation via Molybdenum-Catalyzed Intermolecular Reaction of Ynones with Allylic Amines.

The multi-substituted anilines are widely found in organic synthesis, medicinal chemistry and material science. The quest for robust and efficient methods to construct a diverse array of these compounds using readily accessible starting materials under simple reaction conditions is of utmost importance. Here, we report an unprecedented and efficient approach for the synthesis of 2,4-di and 2,4,6-trisubstituted anilines. With a simple molybdenum(VI) catalyst, a wide range of 2,4-di and 2,4,6-trisubstituted anilines were efficiently prepared in generally good to excellent yields from readily accessible ynones and allylic amines. The synthetic potential of this methodology was further underscored by its applications in several synthetic transformations, gram-scale reactions, and derivatization of bioactive molecules. Preliminary mechanistic studies suggested that this aniline formation might involve a cascade of aza-Michael addition, [1,6]-proton shift, cyclization, dehydration, 6π-electrocyclization, and aromatization. This novel strategy provided a robust, simple, and modular approach for the syntheses of various valuable di- or trisubstituted anilines, some of which were otherwise challenging to access.

Di-chloridotetra-kis-(3-meth-oxy-aniline)nickel(II).

The reaction of nickel(II) chloride with 3-meth-oxy-aniline yielded di-chlorido-tetra-kis-(3-meth-oxy-aniline)nickel(II), [NiCl2(C7H9NO)4], as yellow crystals. The NiII ion is pseudo-octa-hedral with the chloride ions trans to each other. The four 3-meth-oxy-aniline ligands differ primarily due to different conformations about the Ni-N bond, which also affect the hydrogen bonding. Inter-molecular N-H⋯ Cl hydrogen bonds and short Cl⋯Cl contacts between mol-ecules link them into chains parallel to the b axis.

Copper(II)-Catalyzed Amination of Aryl Chlorides in Aqueous Ammonia.

Anilines are ubiquitous in bio-active compounds and their synthesis can be achieved via metal-catalyzed cross-coupling reactions involving aryl halides. We describe an unusual, yet simple, CuII-catalyzed system for the amination of aryl chlorides in pure aqueous ammonia with 2.5 mol % catalyst loading under non-inert conditions. Different from previous systems, the reaction proceeds even without an additional organic solvent. Copper(II) sulfate in combination with 4,7-dimethoxy-1,10-phenanthroline enabled the amination of several aryl chlorides containing electron-neutral, -donating and -withdrawing groups to the corresponding anilines with good to excellent yields. The upscaling potential of the procedure has been shown by the synthesis at 50 mmol scale. The reaction proceeds as one of the rare cases of a CuII-assisted coupling, in contrast to the typical CuI-CuIII intermediates postulated for most Ullmann-type coupling reactions. The copper(II) center allows for a nucleophilic substitution pathway, enabled by the deprotonation of coordinated ammonia.

Evaluation of newly synthesized 2-(thiophen-2-yl)-1H-indole derivatives as anticancer agents against HCT-116 cell proliferation via cell cycle arrest and down regulation of miR-25.

In the present study, we prepared new sixteen different derivatives. The first series were prepared (methylene)bis(2-(thiophen-2-yl)-1H-indole) derivatives which have (indole and thiophene rings) by excellent yield from the reaction (2 mmol) 2-(thiophen-2-yl)-1H-indole and (1 mmol) from aldehyde. The second series were synthesized (2-(thiophen-2-yl)-1H-indol-3-yl) methyl) aniline derivatives at a relatively low yield from multicomponent reaction of three components 2-(thiophen-2-yl)-1H-indole, N-methylaniline and desired aldehydes. The anticancer effect of the newly synthesized derivatives was determined against different cancers, colon, lung, breast and skin. The counter screening was done against normal Epithelial cells (RPE-1). The effect on cell cycle and mechanisms underlying of the antitumor effect were also studied. All new compounds were initially tested at a single dose of 100 µg/ml against this panel of 5 human tumor cell lines indicated that the compounds under investigation exhibit selective cytotoxicity against HCT-116 cell line and compounds (4g, 4a, 4c) showed potent anticancer activity against HCT-116 cell line with the inhibitory concentration IC50 values were, 7.1±0.07, 10.5± 0.07 and 11.9± 0.05 µΜ/ml respectively. Also, the active derivatives caused cell cycle arrest at the S and G2/M phase with significant(p < 0.0001) increase in the expression levels of tumor suppressors miR-30C, and miR-107 and a tremendous decrease in oncogenic miR-25, IL-6 and C-Myc levels. It is to conclude that the anticancer activity could be through direct interaction with tumor cell DNA like S-phase-dependent chemotherapy drugs. Which can interact with DNA or block DNA synthesis such as doxorubicin, cisplatin, or 5-fluorouracil and which were highly effective in killing the cancer cells. This data ensures the efficiency of the 3 analogues on inducing cell cycle arrest and preventing cancer cell growth. The altered expressions explained the molecular mechanisms through which the newly synthesized analogues exert their anticancer action.

Redundancy and resilience of microbial community under aniline stress during wastewater treatment.

Aniline is one of the most toxic and widespread organic pollutants. Although biological treatment is cost-effective and generates minimal secondary pollution, microbial communities are significantly affected by high aniline concentrations, which result in low degradation efficiency. However, a comprehensive understanding of the microbial community response to aniline stress is lacking. Here, we performed a cyclic experiment with aniline concentrations (200, 600, 1200, 600, and 200 mg/L) to investigate the ability of microbial communities to recover their performance after exposure to high aniline concentrations. At aniline concentrations up to 600 mg/L, the bioreactor exhibited high aniline removal efficiency (almost 100 %). Comamonas, Zoogloea, and Delftia played crucial roles in removing aniline and microbial beta diversity changed. Additionally, alpha diversity and network complexity decreased with increasing aniline concentration, but these metrics recovered to their original levels when the aniline concentration was returned to 200 mg/L. Homogeneous and heterogeneous selection dominated microbial community assembly. Therefore, according to the observed variations in community structure and the recovery of keystones after aniline stress, microbial community redundancy and resilience are pivotal for ensuring system stability. Overall, this study provides valuable insights into the redundancy and resilience of microbial communities under aniline stress and establishes a scientific basis for managing and evaluating wastewater treatment plants.

Nickel Complexes Bearing Quinoline Derived NNS Donor Ligands as Catalytic Activators for N-Alkylation of Anilines with Alcohols.

Herein, we have reported a new series of NNS-donor ligands coordinated Ni(II) complexes and utilized them as catalytic activator to synthesize N-alkylated amines and 1,2-disubstituted benzimidazoles. The reaction of thiophenol/4-chlorothiophenol/4-methylthiophenol/4-methoxythiophenol with 2-bromo-N-quinolin-8-yl-acetamide in presence of sodium hydroxide in ethanol at 80 °C gave [C9H6N-NH-C(O)-CH2-S-Ar] [Ar=C6H5 (L1); C6H4Cl-4 (L2); C6H4Me-4 (L3) and C6H4-OMe-4 (L4)], respectively. The corresponding reaction of L1-L4 with Ni(OAc)2 in methanol at 80 °C for 3 hours resulted in octahedral nickel complexes [(L1-H)2Ni] (C1), [(L2-H)2Ni] (C2), [(L3-H)2Ni] (C3), and [(L4-H)2Ni] (C4), respectively. All compounds have been characterized by micro and spectroscopic analysis. The molecular structure of complexes C1-C3 has also been determined by single crystal X-ray diffraction data. The utility of complexes C1-C4 were evaluated for the N-alkylation of aniline with benzyl alcohols, and for 1,2-disubstituted benzimidazoles synthesis. The obtained results indicate that complex C1 showed better catalytic activity in both N-alkylation of amines with benzyl alcohols [catalyst loading: 2.0 mol %; Yield up to 92 %], and for 1,2-disubstituted benzimidazoles derivatives [catalyst loading: 2.0 mol %; Yield up to 94 %)]. The mechanistic studies suggested that the reaction works through hydrogen borrowing from benzyl alcohol and its subsequent utilization for in situ reduction of imine. The experimentally observed catalytic reactivity patterns of complexes C1-C4 have found in good agreement with the HOMO-LUMO energy gaps obtained by DFT analysis of corresponding complexes.