Cobalt molybdate nanoflowers decorated bio-waste derived porous activated carbon nanocomposite: A high performance electrode material for supercapacitors.

In this work, we report a supercapacitor electrode material based on nano-flower like cobalt molybdate decorated on porous activated carbon derived from waste onion peels (ß-CoMoO4-POAC). The obtained POAC exhibits highly porous structure and after the hydrothermal treatment with salts of cobalt and molybdenum, we observed a uniform distribution of ß-cobalt molybdate (ß-CoMoO4) as nano-flowers on the surface of POAC. The chemical composition, morphology and porosity of the materials were thoroughly analyzed using field emission scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, infrared spectroscopy and Brunauer-Emmet-Teller surface area measurement. Due to its flower like and highly porous morphology, ß-CoMoO4@POAC exhibits a high specific capacitance of 1110.72 F/g at a current density of 1 mA/cm2 with superior cyclic retention of 96.03% after 2000 cycles. The best electrochemical performance exhibited by ß-CoMoO4@POAC is mainly due to its high surface area and porous nature of the material which assists in active transport of ions. This study reveals the exceptional electrochemical properties of ß-CoMoO4@POAC which could be considered as a potential material for advanced energy storage devices.

Self-Powered Humidity Sensor Driven by Triboelectric Nanogenerator Composed of Bio-Wasted Peanut Skin Powder.

The increasing number of IoT devices has led to more electronic waste production, which harms the environment and human health. Self-powered sensor systems are a solution, but they often use toxic materials. We propose using biocompatible peanut skin as the active material for a self-powered humidity sensor (PSP-SPHS) through integration with a peanut-skin-based triboelectric nanogenerator (PSP-TENG). The PSP-TENG was characterized electrically and showed promising results, including an open circuit voltage (162 V), short circuit current (0.2 µA), and instantaneous power (2.2 mW) at a loading resistance of 20 MΩ. Peanut skin is a great choice for the sensor due to its porous surface, large surface area, eco-friendliness, and affordability. PSP-TENG was further used as a power source for the PSP-humidity sensor. PSP-SPHS worked as a humidity-dependent resistor, whose resistance decreased with increasing relative humidity (%RH), which further resulted in decreasing voltage across the humidity sensor. This proposed PSP-SPHS exhibited a good sensitivity (0.8 V/RH%), fast response/recovery time (4/10 s), along with excellent stability and repeatability, making it a potential candidate for self-powered humidity sensor technology.

Revalorization of Yerba Mate Residues: Biopolymers-Based Films of Dual Wettability as Potential Mulching Materials.

Biodegradable mulching films are a very attractive solution to agronomical practices intended to achieve more successful crop results. And, in this context, the employment of agricultural and industrial food residues as starting material for their production is an alternative with economic and environmental advantages. This work reports the preparation of bilayer films having two different wettability characteristics from three bio-derived biopolymers: TEMPO-oxidized cellulose nanofibers isolated from infused Yerba Mate residues, Chitosan and Polylactic acid. The infused Yerba Mate residues, the isolated and oxidized cellulose nanofibers, and the films were characterized. Nanofibrillation yield, optical transmittance, cationic demand, carboxyl content, intrinsic viscosity, degree of polymerization, specific surface area and length were studied for the (ligno)cellulose nanofibers. Textural and chemical analysis, thermal and mechanical properties studies, as well as water and light interactions were included in the characterization of the films. The bilayer films are promising materials to be used as mulching films.

Bioengineering of Cu2O structured macro-biotemplate for the ultra-efficient and selective hand-retrieval of glyphosate from agro-farms.

Glyphosate (Gly) is a massively utilized toxic herbicide exceeding its statutory restrictions, causing adverse environmental and health impacts. Engineered nanomaterials, even though are integral to remediate Gly, their practical use is limited due to time and energy driven purifications, and negative environmental impacts. Here, a 3D wide area (~1.6 ± 0.4 cm2) Cu2O nanoparticle supported biotemplate is designed using fish-scale wastes as a sustainable approach for the ultra-efficient and selective hand-remediation of Gly from real-time samples from agro-farms. While the innate metal binding and reducing ability of collagenous scales aided self-synthesis cum grafting of Cu2O, the selective binding potential of Cu2O to Gly facilitated its hand-retrieval; as assessed using optical characterizations, Fourier transform infrared spectroscopy, thermogravimetric analysis and liquid chromatography mass spectrometry. Optimization studies revealed extractions of diverse pay-loads of Gly between 0.1 µg/mL to 40 µg/mL per 80 mg biotemplate grafted with ~6.354 µg of sub-5 nm Cu2O and was exponential to the number of Cu2O@biotemplates. Even though pH and surfactant didn't have any impact on the adsorption of Gly to the Cu2O@biotemplates, increase in the ionic strength led to a drastic increase in the adsorption. Density function theory simulations unveiled the involvement of phosphonic and carboxylic groups of Gly for interaction with Cu2O with a bond length of 1.826 Å and 1.833 Å, respectively. Overall, our sustainably generated, cost-efficient, hand-retrievable Cu2O supported biotemplate can be generalized to extract diverse organophosphorus toxins from agro-farms and other sewage embodiments. SYNOPSIS: Glyphosate is an excessively applied herbicide with potent health hazards and carcinogenicity. Thus, a hand removable Cu2O-supported biotemplate to selectively and efficiently remediate glyphosate from irrigation water is developed.

A comprehensive review of critical analysis of biodegradable waste PCM for thermal energy storage systems using machine learning and deep learning to predict dynamic behavior.

This article explores the use of phase change materials (PCMs) derived from waste, in energy storage systems. It emphasizes the potential of these PCMs in addressing concerns related to fossil fuel usage and environmental impact. This article also highlights the aspects of these PCMs including reduced reliance on renewable resources minimized greenhouse gas emissions and waste reduction. The study also discusses approaches such as integrating nanotechnology to enhance thermal conductivity and utilizing machine learning and deep learning techniques for predicting dynamic behavior. The article provides an overall view of research on biodegradable waste-based PCMs and how they can play a promising role in achieving energy-efficient and sustainable thermal storage systems. However, specific conclusions drawn from the presented results are not explicitly outlined, leaving room, for investigation and exploration in this evolving field. Artificial neural network (ANN) predictive models for thermal energy storage devices perform differently. With a 4% adjusted mean absolute error, the Gaussian radial basis function kernel Support Vector Regression (SVR) model captured heat-related charging and discharging issues. The ANN model predicted finned tube heat and heat flux better than the numerical model. SVM models outperformed ANN and ANFIS in some datasets. Material property predictions favored gradient boosting, but Linear Regression and SVR models performed better, emphasizing application- and dataset-specific model selection. These predictive models provide insights into the complex thermal performance of building structures, aiding in the design and operation of energy-efficient systems. Biodegradable waste-based PCMs' sustainability includes carbon footprint, waste reduction, biodegradability, and circular economy alignment. Nanotechnology, machine learning, and deep learning improve thermal conductivity and prediction. Circular economy principles include waste reduction and carbon footprint reduction. Specific results-based conclusions are not stated. Presenting a comprehensive overview of current research highlights biodegradable waste-based PCMs' potential for energy-efficient and sustainable thermal storage systems.

Investigation of Hybrid Electrodes of Polyaniline and Reduced Graphene Oxide with Bio-Waste-Derived Activated Carbon for Supercapacitor Applications.

Graphene-based materials have been widely studied in the field of supercapacitors. However, their electrochemical properties and applications are still restricted by the susceptibility of graphene-based materials to curling and agglomeration during production. This study introduces a facile method for synthesizing reduced graphene oxide (rGO) nanosheets and activated carbon based on olive stones (OS) with polyaniline (PAni) surface decoration for the development of supercapacitors. Several advanced techniques were used to examine the structural properties of the samples. The obtained PAni@OS-rGO (1:1) electrode exhibits a high electrochemical capacity of 582.6 F·g-1 at a current density of 0.1 A·g-1, and an energy density of 26.82 Wh·kg-1; thus, it demonstrates potential for efficacious energy storage. In addition, this electrode material exhibits remarkable cycling stability, retaining over 90.07% capacitance loss after 3000 cycles, indicating a promising long cycle life. Overall, this research highlights the potential of biomass-derived OS in the presence of PAni and rGO to advance the development of high-performance supercapacitors.

Properties and applications of α-galactosidase in agricultural waste processing and secondary agricultural process industries.

Agriculture products form the foundation building blocks of our daily lives. Although they have been claimed to be renewable resources with a low carbon footprint, the agricultural community is constantly challenged to overcome two post-harvest bottlenecks: first, farm bio-waste, a substantial economic and environmental burden to the farming sector, and second, an inefficient agricultural processing sector, plagued by the need for significant energy input to generate the products. Both these sectors require extensive processing technologies that are demanding in their energy requirements and expensive. To address these issues, an enzyme(s)-based green chemistry is available to break down complex structures into bio-degradable compounds that source alternate energy with valuable by-products and co-products. α-Galactosidase is a widespread class of glycoside hydroxylases that hydrolyzes α-galactosyl moieties in simple and complex oligo and polysaccharides, glycolipids, and glycoproteins. As a result of its growing importance, in this review we discuss the source of the enzyme, production and purification systems, and enzyme properties. We also elaborate on the enzyme's potential in agricultural bio-waste management, secondary agricultural industries like sugar refining, soymilk derivatives, food and confectionery, and animal feed processing. Insight into this vital enzyme will provide new avenues for less expensive green chemistry-based secondary agricultural processing and agricultural sustainability. © 2023 Society of Chemical Industry.

Composition and selected properties of bio-waste collected in towns from single- and multi-family housing and in rural areas.

The progress of civilisation contributes, among other things, to an increase in the mass of waste produced in households. A significant part of it is bio-waste (about 31% in Poland). It is generally agreed that bio-waste is a suitable substrate for valorisation through fermentation with biogas production. Designing new and optimising existing facilities, however, requires precise data on the composition of bio-waste and its properties, which is challenging due to seasonal variability, place of origin (single- or multi-family housing, urban or rural) and collection method. This paper presents the method adopted for conducting the study and the results of an annual, monthly analysis of the morphological composition and selected properties of bio-waste from source-segregated households from 4 rural municipalities and 4 cities, from neighbourhoods with single-family and multi-family housing in Poland. In household bio-waste, the proportion of food waste content ranges from 36.7 to 47.6% (annual average values). The proportion of edible food waste in relation to the total weight of food waste is 5 to 7 times lower. The yearly percentage of garden waste varied from 35.8 to 52.8%. A considerable amount of impurities (such as plastics, glass, and stones) is present in the bio-waste stream. The waste collected in containers in urban areas with multi-family houses is the most polluted (16.6%). The proportion of pollutants in bio-waste collected in bags (rural areas and cities with single-family housing) does not exceed 10%.

Physicochemical, Technological and Functional Properties of Upcycled Vegetable Waste Ingredients as Affected by Processing and Storage.

Vegetable wastes are generated during harvesting, processing, and distribution, which implies a wastage of nutrients and evidence inefficiencies in present food systems. Vegetable residues are rich in bioactive compounds, for which their valorisation and reintroduction into the food chain are crucial towards circular economy and food systems sustainability. In this work, upcycled powdered ingredients were obtained from vegetables wastes (carrot, white cabbage, celery, and leek) through a disruption, dehydration and milling process. Disruption pre-treatment at different intensities was followed by freeze-drying or hot-air drying (60 and 70 °C), and final milling to produce fine powders. Powdered products were characterized in terms of physicochemical, antioxidant and technological properties (water and oil interaction), after processing and during four months of storage. Antioxidant properties were generally favoured by hot-air drying, particularly at 70 °C, attributed to new compounds formation combined to less exposure time to drying conditions. The powders showed good water interaction properties, especially freeze-dried ones. Storage had a negative impact on the quality of powders: moisture increased, antioxidant compounds generally diminished, and colour changes were evidenced. Upcycled vegetable waste powders are proposed as ingredients to fortify foods, both processing and storage conditions having an impact on their properties.

Use of Bio-Waste of Ilex paraguariensis A. St. Hil. (Yerba mate) to Obtain an Extract Rich in Phenolic Compounds with Preservative Potential.

In this work, a comparison between the extracts of dehydrated yerba mate (Ilex paraguariensis) and bio-waste of yerba mate leaves from the Brazilian industry was made. The incorporation of the functional extract as a preservative/functional ingredient in a pastry product (pancakes) was tested. The individual profile of phenolic compounds was determined by HPLC-DAD-ESI/MS, and the bioactive potential was assessed using in vitro assays for antioxidant, anti-inflammatory, antimicrobial, and cytotoxic activities. The yerba mate extracts revealed a high antimicrobial potential against the tested strains and a very promising antioxidant and anti-inflammatory action. Additionally, revealed a cytotoxic capacity for MCF-7, CaCo and AGS tumor cell-lines. In the three types of pancakes, after 3 days of storage, the chemical and nutritional characteristics remain unchanged, proving the preservative efficiency of the extract. This study showed the benefits of the use bio-waste from agro-industrial sector, focusing on sustainable production and the development of circular economy.

Dynamics of black soldier fly larvae composting - Impact of substrate properties and rearing conditions on process efficiency.

Inadequate organic waste management have detrimental impact on the environment and on public health. Black soldier fly (BSF) larvae composting is a biological treatment for biodegradable waste that align with circular economy principles. The bioconversion efficiency of bio-waste into larval biomass is influenced by various factors, such as substrate type and the process parameters employed in the larval rearing process. In this study, the influence of these parameters on survival, material reduction (Mat.Red), waste-to-biomass conversion efficiency (BCE) and larval yield per rearing unit was investigated through two sets of experiments. In Experiment 1, the impact of larval density in five distinct rearing substrates was evaluated, while the effect of larval feed dose and substrate depth was assessed in Experiment 2, using a model substrate (dog food). In Experiment 1 it was found that higher larval density lead to an increase in BCE and larval yield, up to a threshold (around 6.25 larvae cm-2). Surpassing this threshold led to the production of smaller larvae, while the yield remained relatively consistent. In Experiment 2 it was found that supplying the substrate in a shallow layer (1-1.5 cm depth) and providing a low feed dose (0.1 g volatile solids (VS) larva-1) led to higher BCE and Mat.Red, albeit with a reduced overall yield per unit. Increasing feed load and substrate depth reduced the conversion efficiency, Mat.Red and larval survival. This study enhances the understanding of the effect of various process parameters used in the BSF larvae treatment, and how they interrelate.

Comparative assessment of the remineralization characteristics of nano-hydroxyapatite extracted from fish scales and eggshells.

OBJECTIVES: Dentine hypersensitivity (DH) is a common concern in dentistry that has the potential to restrict daily activities and harm a person's quality of life. In this study, the remineralization characteristics of nano-hydroxyapatite (nHAp) extracted from waste eggshells and fish scales were comparatively assessed. MATERIALS AND METHODS: The extraction methods used to obtain nHAp from both fish scales and eggshells are also described. The effect of the extraction process and bio-waste source on the physicochemical characteristics of the nHAp such as Ca/P ratio, functional groups, crystallinity and phase change, and surface morphology are presented in the study. The remineralization properties were evaluated using dentine models (n = 15). A field scanning electron microscope was used to evaluate the effectiveness of the dentine tubules occlusion. The percentage occluded area for all the specimens was evaluated statistically using a one-way analysis of variance (α = 0.05). RESULTS: The results showed that there were variations in the physicochemical characteristics of the nHAp extracted, including the crystallinity, particle size, and surface morphology, and buffering effects against citric acids. The EnHAp extracted from eggshells had higher crystallinity, superior buffering effects, and smaller particle size compared to the nHAp extracted from fish scales, making it a more favourable material for remineralization of teeth. The statistical evidence showed that there were statistically significant differences in the dentine occluding properties measured in the nHAp (p < 0.001). The highest mean % occluded area was measured with the EnHAp group. CONCLUSIONS: The findings of this study provide insights into the use of bio-waste materials for the development of sustainable and effective products for oral health care.

Hydrothermal Extraction and Characterization of Natural Hydroxyapatite from Waste Bovine Femur Bone.

The management of large amounts of bio-wastes, such as bovine femurs from kitchens and slaughterhouses, has long been a challenging issue. However, through the utilization of a hydrothermal process, it is possible to transform these bio-wastes into valuable products. In this study, we focused on extracting hydroxyapatite (HAp), the primary inorganic component of bovine femurs, for potential use in bone tissue engineering scaffolds. By subjecting the femurs to hydrothermal treatment at varying times and solvents, we successfully decomposed and removed the organic matter present, resulting in the extraction of HAp. To comprehensively evaluate the properties of the extracted HAp, we employed several characterization techniques that provided valuable insights into the structure, morphology, and elemental composition of the extracted HAp. Furthermore, we conducted a Cell Counting Kit-8 assay, which confirmed the favorable biocompatibility of the extracted HAp. Overall, this study highlights the potential of hydrothermal treatment as an environmentally friendly and cost-effective method for handling bio-waste, specifically bovine femurs. The extracted HAp exhibits promising characteristics, making it suitable for a wide range of biomedical applications. This research contributes to the sustainable utilization of bio-waste and underscores the importance of resourceful exploitation for environmental protection.

The Action Mechanisms, Anti-Cancer and Antibiotic-Modulation Potential of Vaccinium myrtillus L. Extract.

BACKGROUND: Herbal medicinal products containing Vaccinium myrtillus L. (bilberry) fruits and fruit extracts are widely available in the market. Although bilberry leaves and stems are considered as bio-waste, they contain much higher levels of phenolic compounds than fruits. The study aimed to investigate the antimicrobial and anticancer potential of aerial part extracts from Vaccinium myrtillus L. (V. myrtillus, VM) plants harvested at high altitudes in Armenian landscape and characterize the bioactive phytochemicals. MATERIAL AND METHODS: For evaluation of antioxidant properties, chemical-based tests (total phenolic and flavonoid content, and antiradical activity in 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) tests) and cellular antioxidant activity (CAA) assay were applied. Genotoxicity and anticancer properties of the extract alone and in combination with fluorouracil were explored in human cancer and normal cell lines. Antibacterial properties of V. myrtillus extract alone and in combination with antibiotics, as well as their effect on proton-flux rate through cell membrane were explored on bacterial strains. The characterization of active phytochemicals was done using Liquid Chromatography-Quadrupole-Orbitrap High-Resolution Mass Spectrometry (LC-Q-Orbitrap HRMS). RESULTS: The V. myrtillus aerial part extract demonstrated promising antioxidant properties in all tests. The selective cytotoxic activity was documented against various cancer cell lines (human colon adenocarcinoma (HT29), human breast cancer (MCF-7) and human cervical carcinoma (HeLa)), while it did not inhibit the growth of tested human normal primary renal mixed epithelial cells (HREC) even at 10-fold higher concentrations. The extract did not have genotoxic properties in comet assay making it a potential source for the development of anticancer preparations. The investigated extract did not directly inhibit the growth of Escherichia coli (E. coli) and Salmonella typhimurium (S. typhimurium) strains at up to 1 mg/mL concentration. However, V. myrtillus extract enhanced the kanamycin intake and increased its efficiency against E. coli strain. The phytochemical characterization of the extract showed the presence of different groups of phenolics. CONCLUSIONS: Based on obtained data, we suggest the aerial parts of the V. myrtillus plant as an alternative source of bioactive natural products for food supplements, nutraceuticals, functional foods and medicine.

Management practices for compostable plastic packaging waste: Impacts, challenges and recommendations.

The EU Green Deal aims at solving the challenges related to plastic production, (mis-)use, and pollution. While the bioplastic industry is identified as one of the possible avenues to tackle the problem, bioplastic waste collection and management practices are still far from full-development and harmonisation. To inform policy makers on the best practices and their feasibility, this study quantifies environmental and economic impacts of compostable plastic packaging (CPP) waste management schemes by means of Life Cycle Assessment and Costing. Results show that, with respect to climate change and financial costs, the scheme leading to the highest benefits is collecting CPP with conventional plastic waste followed by mechanical sorting and recycling (saving ca. 306 kg CO2eq. t-1 at a net income of 3.7 EUR t-1). The second best option is collecting CPP with bio-waste followed by biological treatment (saving ca. 69 kg CO2eq. t-1 at a cost of 197 EUR t-1). Collecting CPP with conventional plastics followed by sorting and biological treatment is to be avoided. The trend on the other impact categories generally follows climate change. Ideally, closed loop is therefore preferred, but conditioned by (i) having high share of CPP in municipal waste (else sorting is economically unfeasible), (ii) good citizen's behaviour at source-segregation, and (iii) an established market for secondary material. Currently, overall benefits are limited by the low amounts, suggesting that the management choice could ultimately be based on rather simple technical and economic feasibility criteria while regulatory and management efforts should be focused on other waste streams with greater implications on environment.

Carbon Monoxide Production during Bio-Waste Composting under Different Temperature and Aeration Regimes.

Despite the development of biorefinery processes, the possibility of coupling the "conventional" composting process with the production of biochemicals is not taken into account. However, net carbon monoxide (CO) production has been observed during bio-waste composting. So far, O2 concentration and temperature have been identified as the main variables influencing CO formation. This study aimed to investigate CO net production during bio-waste composting under controlled laboratory conditions by varying aeration rates and temperatures. A series of composting processes was carried out in conditions ranging from mesophilic to thermophilic (T = 35, 45, 55, and 65 °C) and an aeration rate of 2.7, 3.4, 4.8, and 7.8 L·h-1. Based on the findings of this study, suggestions for the improvement of CO production throughout the composting process have been developed for the first time. The highest concentrations of CO in each thermal variant was achieved with an O2 deficit (aeration rate 2.7 L·h-1); additionally, CO levels increased with temperature, reaching ~300 ppm at 65 °C. The production of CO in mesophilic and thermophilic conditions draws attention to biological CO formation by microorganisms capable of producing the CODH enzyme. Further research on CO production efficiency in these thermal ranges is necessary with the characterization of the microbial community and analysis of the ability of the identified bacteria to produce the CODH enzyme and convert CO from CO2.

Bio-waste mediated synthesis of zirconium nanoparticle fuel: Energy management strategy for performance evaluation in a diesel engine.

The impact of biosynthesized zirconium nanoparticles originated from biological waste, blended in diesel fuel processed through bio-refining strategy and its combustion, emissions, and overall diesel engine performance towards safety has been examined. Different weight fractions of zirconia nanoparticles were combined with crude diesel at 10, 20, and 30 mg/L values. According to the engine tests, Zirconia (20 nm) added to pure diesel at a concentration of 30 parts per million incremented thermal efficiencies by 4.9% compared to regular diesel fuel. The average reduction in specific fuel consumption for clean diesel fuel when the engine was operating at full power was 2.9%, 3.9%, and 4.9%. Diesel smoke, hydrocarbon, CO, and NOx emissions were reduced by 13%, 20%, 25%, and 29%, respectively, when nano additives were used at a concentration of 30 ppm.Nanoparticles enhance fuel stability, overcome detonation difficulties, and avoid fouling spark plugs. The pressure within cylinder, the temperature, and the rate at which heat is released was improved when alumina nanoparticles were appended to diesel fuel. However, both the length of the combustion and further delay in ignition were cut down. The ideal concentration of zirconia nanoparticles for improving combustion, efficiency, and emissions along with safety attainment in an internal combustion engine is recorded at 30 ppm.

Side Streams of Vegetable Processing and Its Bioactive Compounds Support Microbiota, Intestine Milieu, and Immune System.

The industry of vegetable processing generates large amounts of by-products, which often emerge seasonally and are susceptible to microbial degradation. Inadequate management of this biomass results in the loss of valuable compounds that are found in vegetable by-products that can be recovered. Considering the possibility of using waste, scientists are trying to reuse discarded biomass and residues to create a product of higher value than those processed. The by-products from the vegetable industry can provide an added source of fibre, essential oils, proteins, lipids, carbohydrates, and bioactive compounds, such as phenolics. Many of these compounds have bioactive properties, such as antioxidative, antimicrobial, and anti-inflammatory activity, which could be used, especially in the prevention or treatment of lifestyle diseases connected with the intestinal milieu, including dysbiosis and immune-mediated diseases resulting in inflammation. This review summarises the key aspects of the health-promoting value of by-products and their bioactive compounds derived from fresh or processed biomass and extracts. In this paper, the relevance of side streams as a source of beneficial compounds with the potential for promoting health is considered, particularly their impact on the microbiota, immune system, and gut milieu because all of these fields interact closely to affect host nutrition, prevent chronic inflammation, and provide resistance to some pathogens.

Intranasal Lipid Nanoparticles Containing Bioactive Compounds Obtained from Marine Sources to Manage Neurodegenerative Diseases.

Marine sources contain several bioactive compounds with high therapeutic potential, such as remarkable antioxidant activity that can reduce oxidative stress related to the pathogenesis of neurodegenerative diseases. Indeed, there has been a growing interest in these natural sources, especially those resulting from the processing of marine organisms (i.e., marine bio-waste), to obtain natural antioxidants as an alternative to synthetic antioxidants in a sustainable approach to promote circularity by recovering and creating value from these bio-wastes. However, despite their expected potential to prevent, delay, or treat neurodegenerative diseases, antioxidant compounds may have difficulty reaching the brain due to the need to cross the blood-brain barrier (BBB). In this regard, alternative delivery systems administered by different routes have been proposed, including intranasal administration of lipid nanoparticles, such as solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), which have shown promising results. Intranasal administration shows several advantages, including the fact that molecules do not need to cross the BBB to reach the central nervous system (CNS), as they can be transported directly from the nasal cavity to the brain (i.e., nose-to-brain transport). The benefits of using SLN and NLC for intranasal delivery of natural bioactive compounds for the treatment of neurodegenerative diseases have shown relevant outcomes through in vitro and in vivo studies. Noteworthy, for bioactive compounds obtained from marine bio-waste, few studies have been reported, showing the open potential of this research area. This review updates the state of the art of using SLN and NLC to transport bioactive compounds from different sources, in particular, those obtained from marine bio-waste, and their potential application in the treatment of neurodegenerative diseases.

Biofabrication of carbon quantum dots and their food packaging applications: a review.

Carbon quantum dots (CQDs) are an emerging class of novel carbon nanomaterials (< 10 nm). These zero-dimensional CQDs have recently invoked significant interest due to their high fluorescence ability, strong electronic conductivity, biocompatibility, excellent chemical stability, non-toxicity, and environmental safety. Bio-fabrication of CQDs from organic resources remains attractive owing to their excellent functional properties. An emerging class of CQDs is fabricated by various conventional methods. However, these methods need many chemical agents and instrument facilities. Bio-fabrication of CQDs has a lot of benefits because of its simple fabrication and eco-friendly. Therefore, the green synthesized CQDs are considered optimistic candidates for developing novel functional materials for food packaging applications. Thus, it is important to investigate the latest update on green-based CQDs for food packaging applications. This current review paper discusses the physicochemical properties of CQDs, the bio-fabrication of CQDs, and the fluorescent properties of CQDs along with their food packaging applications.