Emerging Insights into the Endocrine Regulation of Bone Homeostasis by Gut Microbiome.

Gut microbiota plays an important role in the regulation of bone homeostasis and bone health. Recent studies showed that these effects could be mediated through microbial metabolites released by the microbiota like short-chain fatty acids, metabolism of endogenous molecules such as bile acids, or a complex interplay between microbiota, the endocrine system, and the immune system. Importantly, some studies showed a reciprocal relationship between the endocrine system and gut microbiota. For instance, postmenopausal estrogen deficiency could lead to dysbiosis of the gut microbiota, which could in turn affect various immune response and bone remodeling. In addition, evidence showed that shift in the indigenous gut microbiota caused by antibiotics treatment may also impact normal skeletal growth and maturation. In this mini-review, we describe recent findings on the role of microbiome in bone homeostasis, with a particular focus on molecular mechanisms and their interactions with the endocrine and immune system. We will also discuss the recent findings on estrogen deficiency and microbiota dysbiosis, and the clinical implications for the development of new therapeutic strategies for osteoporosis and other bone disorders.

Repeated unilateral injections of botulinum toxin in masticatory muscles in adult rats do not amplify condylar and alveolar bone loss nor modify the volume of the hypertrophic bone proliferation at enthesis.

OBJECTIVES: Botulinum toxin is used in human in repeatedly masticatory muscles injections. A single BTX injection in animal induces mandibular bone loss with a muscle enthesis hypertrophic metaplasia. Our aim was to evaluate mandibular bone changes after unilateral repeated injections of BTX in adult rats. STUDY DESIGN: Mature male rats were randomized into 3 groups: one, two or three injections. Each rat received injections in right masseter and temporalis muscles. The left side was the control side. Microcomputed tomography was used to perform 2D and 3D analyses. RESULTS: Bone loss was evidenced on the right sides of alveolar and condylar bone. Alveolar bone volume increased in both control left side and injected right side whereas condylar bone volume remained constant in all groups, for both sides. Enthesis bone hypertrophic metaplasias were evidenced on the BTX injected sides without any modification with the number of injections. CONCLUSION: BTX repeated injections in masticatory muscles lead to major mandibular condylar and alveolar bone loss that does not worsen. They lead to the occurrence of an enthesis bone proliferation that is not dependent on the number of injections. These results are an argument for the safety of BTX injections in masticatory muscles in human.

Deciphering the Biological Ageing Impact on Alveolar Bone Loss: Insights from α-Klotho and Renal Function Dynamics.

Alveolar bone loss is generally considered as a chronological age-related disease. As biological ageing process is not absolutely determined by increasing age, whether alveolar bone loss associated with increasing chronological age or biological ageing remains unclear. Accurately distinguishing whether alveolar bone loss is chronological age-related or biological ageing-related is critical for selecting appropriate clinical treatments. This study aimed to identify the relationship between alveolar bone loss and body ageing. 3635 participants from National Health and Nutrition Examination Survey and 71 living kidney transplant recipients from Gene Expression Omnibus Datasets were enrolled. Multivariate regression analysis, smooth curve fittings and generalized additive models were used to explore the association among alveolar bone loss, age, serum α-Klotho level, renal function markers, as well as between preoperative creatinine and renal cortex related α-Klotho gene expression level. Meanwhile, a two-sample Mendelian randomization study was conducted to assess the causal relationship between α-Klotho and periodontal disease (4,376 individuals versus 361,194 individuals). As biological ageing related indicator, α-Klotho level was negatively correlated with impaired renal function and alveolar bone loss. Correspondingly, accompanied by decreasing renal function, it was manifested with down-regulated expression level of α-Klotho in renal cortex and aggravated alveolar bone loss. The MR analysis further identified the negative association between higher genetically predicted α-Klotho concentrations with alveolar bone loss susceptibility using the IVW (OR=0.999, P=0.005). However, an inversely U-shaped association was observed between chronological age and alveolar bone loss, which especially stable in men (the optimal cut-off values were both 62 years old). For male above 62 years old, increasing age converted to protective factor and accompanied by alleviated alveolar bone loss. Alveolar bone loss which directly associated to decreased renal function and α-Klotho level was related to biological ageing rather than chronological age. The renal-alveolar bone axis could provide new sight of clinical therapy in alveolar bone loss.

Custom fabricated three-dimensional printed surgical guide for trephine bur in autogenous bone graft: A technique report.

This technique presents a workflow that designs the custom surgical guide to cover a trephine bur using simple slicer software and three-dimensional (3D) printing to perform the semilunar technique. This method in autogenous bone grafting surgery harvests a thin layer of cortical bone in the donor site with a trephine bur. Its biologically favorable, round shape can be used as a shell to reconstruct the ridge with a 3D contour acceptable for future implant placement. A 78-year-old female patient required vertical and horizontal bone grafting for future implant placement due to the infection caused by the vertically fractured root of a premolar. The patient's cone beam computed tomography (CBCT) file was translated into a standard tessellation language (STL) file, and recipient and donor site models were created. Simulated surgery was done using the software first to detect any possible complications during surgery. The trephine bur planned for use in surgery was measured in necessary dimensions, and the values were added to create a guide for surgery in slicer software. Then, it was 3D-printed with a stereolithography (SLA) printer. After testing the fit of the guide, it was further tested on a fused filament fabrication (FFF) printed donor site model to check if the desired shape and size of the plate were acquired after harvest. Then, the plates were used for model surgery on the recipient site model. After no issues from the previous steps, the final patient surgery was approved and completed with success. This technique utilizes the SLA printing method to create the custom surgical guide for a trephine bur without using commercially available products. Moreover, it could be tested on FFF 3D-printed anatomical models to ensure its validity. With this innovative technique, clinicians can efficiently perform a semilunar technique, facilitating the surgery and improving patient care.

Clinical management of bone loss in cervical total disc arthroplasty: literature review and treatment recommendations.

PURPOSE: Cervical total disc replacement (cTDR) has been established as an alternative treatment for degenerative cervical radiculopathy and myelopathy. While the rate of complications for cTDR is reasonably low, recent studies have focused on bone loss after cTDR. The purpose of this work is to develop a clinical management plan for cTDR patients with evidence of bone loss. To guide our recommendations, we undertook a review of the literature and aimed to determine: (1) how bone loss was identified/imaged, (2) whether pre- or intraoperative assessments of infection or histology were performed, and (3) what decision-making and revision strategies were employed. METHODS: We performed a search of the literature according to PRISMA guidelines. Included studies reported the clinical performance of cTDR and identified instances of cervical bone loss. RESULTS: Eleven case studies and 20 cohort studies were reviewed, representing 2073 patients with 821 reported cases of bone loss. Bone loss was typically identified on radiographs during routine follow-up or by computed tomography (CT) for patients presenting with symptoms. Assessments of infection as well as histological and/or explant assessment were sporadically reported. Across all reviewed studies, multiple mechanisms of bone loss were suspected, and severity and progression varied greatly. Many patients were reportedly asymptomatic, but others experienced symptoms like progressive pain and paresthesia. CONCLUSION: Our findings demonstrate a critical gap in the literature regarding the optimal management of patients with bone loss following cTDR, and treatment recommendations based on our review are impractical given the limited amount and quality evidence available. However, based on the authors' extensive clinical experience, close follow-up of specific radiographic observations and serial radiographs to assess the progression/severity of bone loss and implant changes are recommended. CT findings can be used for clinical decision-making and further follow-up care. The pattern and rate of progression of bone loss, in concert with patient symptomatology, should determine whether non-operative or surgical intervention is indicated. Future studies involving implant retrieval, histopathological, and microbiological analysis for patients undergoing cTDR revision for bone loss are needed.

The Use of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) Technology for Zirconia Crowns After Laser-Assisted Crown Lengthening and Retraction: A Case Report.

Maintenance of biological width serves as a primary factor in periodontal-restorative relationships. Crown lengthening (CL) is a technique to prevent violation of biological width, with the laser method offering the advantage of surgical and patient-related outcomes. Laser CL with retraction helps with the excision of tissues, increasing the CL, maintaining the gingival contour with adequate exposure to the finish line to record the tooth preparation features. This helps to achieve the functional and esthetic outcomes essential for restorative dentistry. The marginal fit, contour, and adaptation of the crown can be further enhanced by computer-aided design and computer-aided manufacturing (CAD/CAM) technology improving patient and clinical outcomes. Hence, this case report aims to indulge the laser-assisted procedures and CAD/CAM technology to fabricate and deliver a zirconia crown maintaining the periodontal-restorative factors.

Comparative efficacy of flapped versus flapless dental implant procedures: A meta-analysis.

Objectives: Dental implant procedures are crucial for replacing missing teeth, with various surgical techniques impacting the outcome. This systematic review and meta-analysis aimed to evaluate the effects of flapped and flapless surgical techniques on implant survival and marginal bone loss (MBL). Methods: We included clinical studies with at least ten subjects, excluding review articles, editorials, and conference abstracts. Studies were sourced from PubMed, Medline, ERIC, and Wiley, published between 2000 and 2022. Data were analyzed using random-effects models to compare implant survival and MBL between flapped and flapless techniques. Results: The review identified 21 studies meeting the inclusion criteria. Flapless techniques showed a higher implant survival rate with an approximate survival rate of 98.6% in prospective cohort studies and 95.9% in retrospective studies. MBL was consistently lower in the flapless group, averaging 0.6-2.1 mm, compared to 1.5-3 mm in the flapped group. Low-risk studies demonstrated more consistent and reliable results, supporting the efficacy of flapless procedures. Conclusion: Flapless implant surgery offers a viable alternative to traditional flapped surgery, showing higher rates of implant survival and less MBL. However, successful outcomes depend on advanced imaging, precise surgical techniques, and adequate training. Further high-quality studies are needed to confirm these findings and refine clinical recommendations.

Immediate full-arch fixed rehabilitation of a narrow mandible with newly conceived connection system implants: A case report.

Rehabilitating thin jaws without reconstructive surgery entails using narrow implants. The proposed treatment adopted an innovative implant system, allowing the mini-screws to be parallel and immediately loaded. A mandible, wearing an overdenture, was functionalized contextually to the residual dental extraction and the placement of six 2.4-mm thick one-piece implants. Low-profile intermediate abutments, the LEMs, able to rotate over the spherical heads of the fixtures, were connected after suturing, oriented, and blocked in a mutual parallel position. The copings, engaging with a tapered juncture of the LEMs, resulted in their alignment to be intraorally wedged together. The provisional superstructure enclosed the copings and was immediately connected to the implants, and the definitive prosthesis was delivered after three months. No clinical signs of peri-implantitis or radiographically evident bone loss were recorded after a two-year follow-up without any prosthetic complication. No cases have been published regarding mini-implants bearing fixed prosthesis rehabilitation.

Feasibility and Preliminary Efficacy of α-Calcium Sulfate Hemihydrate in Socket Preservation: Protocol for a Pilot Randomized Controlled Trial.

BACKGROUND: Tooth extraction procedures often lead to bone resorption, which can have adverse effects on the dimensions of the alveolar ridge. Research has shown that socket preservation techniques using bone graft substitutes can effectively minimize early bone loss in such cases. α-calcium sulfate hemihydrate (α-CSH) has garnered significant attention as a potential bone graft material due to its favorable properties, including osteoconductivity, angiogenic potential, and biocompatibility. Considering these facts, we developed a preliminary protocol for applying α-CSH in addressing alveolar bone loss following tooth extraction. OBJECTIVE: This research's general objective is to evaluate the feasibility and initial effectiveness of α-CSH as bone-inducing graft material for socket preservation after tooth extraction. METHODS: This preliminary clinical trial will involve 30 fresh extraction sockets from individuals aged 18-35 years. The participants will be divided into 2 groups: one group will receive α-CSH graft material after tooth extraction for socket preservation, while the other group will not receive any graft material. Throughout the study, the participants will be closely monitored for safety measures, which will include clinical examinations, radiographic imaging, and blood tests. Radiographic imaging will be used extensively to assist the progress of bone formation. RESULTS: The study commenced enrollment in August 2022 and is scheduled to conclude post assessments and analyses by the end of 2023. The results of the study are anticipated to be accessible in late 2024. CONCLUSIONS: This clinical study represents the initial investigation in humans to assess the feasibility and efficacy of α-CSH in alveolar bone regeneration. We hypothesize that the inclusion of α-CSH can greatly expedite the process of bone formation within fresh sockets, resulting in a swift restoration of bone height without the disadvantages associated with harvesting autogenous bone graft. TRIAL REGISTRATION: Indonesia Registry Center INA-D02FAHP; https://tinyurl.com/2jnf6n3s. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/49922.

Evaluation of glenoid morphology and bony Bankart lesion in shoulders with traumatic anterior instability using zero echo time magnetic resonance imaging.

Background: Preoperative computed tomography (CT) evaluation of bone morphometry aids in determining treatment strategies for shoulder instability. The use of zero echo time (ZTE) sequence in magnetic resonance imaging (MRI), a new bone cortex imaging technique, may help reduce radiation exposure and medical costs. Therefore, this study aimed to evaluate the glenoid morphology and detect the presence of bony Bankart lesion using ZTE MRI in shoulders with anterior instability and compare its diagnostic accuracy with that of CT. Methods: Thirty-six patients (36 shoulders) with anterior instability who underwent preoperative CT and MRI examinations between April 2019 and October 2021 were retrospectively analyzed. The percentages of glenoid bone defects on 3-dimensional (3D) CT and ZTE images were determined, and the correlation between these percentages was evaluated. The number of cases with bony Bankart lesion on CT and 2 types of ZTE (3D and CT-like) images was determined, and the diagnostic accuracy of ZTE for detecting bony Bankart lesion was assessed, with CT as the gold standard. Patients with bony Bankart lesion on CT images were divided into 2 groups based on whether the lesion was detectable on 3D ZTE or CT-like images. The longer diameters of bony Bankart lesion were compared between the groups. Results: The median percentage of glenoid bone loss was 12.1% (range, 1.3%-45.9%) and 12.3% (range, 0%-46.6%) on 3D CT and 3D ZTE images, respectively. The Spearman's rank correlation coefficient was 0.89. Bony Bankart lesion was detected in 18, 13, and 8 shoulders of the 36 patients on CT, 3D ZTE, and CT-like images, respectively. The overall diagnostic accuracy of the CT-like and 3D ZTE images for detecting bony Bankart lesion was 86.1% and 72.2%, respectively. A significant difference was observed between the groups with and without bony Bankart lesion on CT-like images in terms of the long diameter of the bone fragments on CT (P < .01). Conclusion: ZTE MRI demonstrated high reproducibility for the evaluation of glenoid bone defect in shoulders with anterior instability. Although no significant difference in the measurement was observed compared with that on CT, the ability of ZTE MRI to delineate bone Bankart lesion remains limited.

Hemi-Masquelet technique and nailing in a circumferential bone defect of 7 cm after open femoral shaft fracture. A case report.

The treatment of Gustilo-Anderson type III open femoral fracture with large segmental bone defect remains a challenge for orthopedic trauma surgeons. The aims of management are first to prevent the risk of infection and then to reconstruct the bone loss with correct alignment and length. The induced membrane technique (or Masquelet technique) was initially described for tibia nonunion but became over the years an established procedure to treat any kind of large bone defect. The case of a 22-year old male who sustained an open femoral shaft fracture with a circumferential 7-cm bone defect after a car accident is presented. Given the critical size of the bone loss, we chose to manage this patient using a modified-Masquelet technique, in which we stabilized the fracture by an intramedullary femoral nail and filled only the lateral side of the defect with a cement spacer. He went on to have a full and successful union of his fracture 16-weeks after the second stage surgery. The final functional outcomes were excellent allowing the patient to resume all activities without restriction.

Rational design of multifunctional hydrogels targeting the microenvironment of diabetic periodontitis.

Periodontitis is a chronic inflammatory disease and is the primary contributor to adult tooth loss. Diabetes exacerbates periodontitis, accelerates periodontal bone resorption. Thus, effectively managing periodontitis in individuals with diabetes is a long-standing challenge. This review introduces the etiology and pathogenesis of periodontitis, and analyzes the bidirectional relationship between diabetes and periodontitis. In this review, we comprehensively summarize the four pathological microenvironments influenced by diabetic periodontitis: high glucose microenvironment, bacterial infection microenvironment, inflammatory microenvironment, and bone loss microenvironment. The hydrogel design strategies and latest research development tailored to the four microenvironments of diabetic periodontitis are mainly focused on. Finally, the challenges and potential solutions in the treatment of diabetic periodontitis are discussed. We believe this review will be helpful for researchers seeking novel avenues in the treatment of diabetic periodontitis.

Risk factors of bone loss after Prestige-LP cervical disc arthroplasty.

PURPOSE: Cervical disc arthroplasty (CDA) is widely employed for patients diagnosed with cervical degenerative disc disease (CDDD). Postoperative bone loss (BL) represents a radiological alteration that is a relatively novel consideration in the realm of CDA. This study endeavors to examine the risk factors associated with BL following CDA, aiming to elucidate the underlying mechanisms and the impact of BL on surgical outcomes. METHODS: A retrospective study was undertaken, encompassing consecutive patients subjected to one-level CDA, two-level CDA, or two-level hybrid surgery (HS) for the treatment of CDDD at our institution. Patient demographic and perioperative data were systematically recorded. Radiological images obtained preoperatively, at 1-week post-operation, and during the last follow-up were collected and evaluated, following with statistical analyses. RESULTS: A total of 295 patients and 351 arthroplasty segments were involved in this study. Univariate logistic regressions indicated that age ≥ 45 years and two-level HS was associated with lower risk of BL; and a greater ΔDA (change of disc angle before and after surgery) was correlated with an increased risk of BL. Multivariate logistic regression determined that two-level HS and greater ΔDA were independent preventative and risk factors for BL, respectively. Further analysis revealed that severe BL significantly elevated the risk of implant subsidence compared to non-BL and mild BL. CONCLUSIONS: This study posited bone remodeling and micromotion as potential underlying mechanisms of BL. Subsequent research endeavors should delve into the divergent mechanisms and progression observed between lower- and higher-grade BL, aiming to prevent potential adverse outcomes associated with severe BL.

Overexpression of the receptor for resolvin E1 (ERV1) prevents early alveolar bone loss in leptin receptor deficiency-induced diabetes.

BACKGROUND: This study was designed to test the hypothesis that the leptin receptor (LepR) regulates changes in periodontal tissues and that the overexpression of the receptor for resolvin E1 (ERV1) prevents age- and diabetes-associated alveolar bone loss. METHODS: LepR-deficient transgenic (TG) mice were cross-bred with those overexpressing ERV1 (TG) to generate double-TG mice. In total, 95 mice were divided into four experimental groups: wild type (WT), TG, LepR deficient (db/db), and double transgenic (db/db TG). The groups were followed from 4 weeks up to 16 weeks of age. The natural progression of periodontal disease without any additional method of periodontitis induction was assessed by macroscopic and histomorphometric analyses. Osteoclastic activity was measured by tartrate-resistant acid phosphatase (TRAP) staining. RESULTS: At 4 weeks, ERV1 overexpression prevented weight gain. From Week 8 onward, there was a significant increase in the weight of db/db mice with or without ERV1 overexpression compared to the WT mice, accompanied by an increase in glucose levels. By 8 weeks of age, the percentage of bone loss in the LepR deficiency groups was significantly greater compared to WT mice. ERV1 overexpression in the db/db TG mice prevented early alveolar bone loss; however, it did not impact the development of diabetic bone loss in aging mice after the onset of weight gain and diabetes. CONCLUSIONS: The findings suggest that the overexpression of ERV1 prevents LepR-associated alveolar bone loss during the early phases of periodontal disease by delaying weight gain, diabetes onset, and associated inflammation; however, LepR deficiency increases susceptibility to naturally occurring inflammatory alveolar bone loss as the animal ages, associated with excess weight gain, onset of diabetes, and excess inflammation.

Prevention of bone dehiscence associated with orthodontic tooth movement by prophylactic injection of bone anabolic agents in mice.

Although bone dehiscence may occur during orthodontic tooth movement into the narrow alveolar ridge, a non-invasive prevention method is yet to be fully established. We show for the first time prevention of bone dehiscence associated with orthodontic tooth movement by prophylactic injection of bone anabolic agents in mice. In this study, we established a bone dehiscence mouse model by applying force application and used the granular type of scaffold materials encapsulated with bone morphogenetic protein (BMP)-2 and OP3-4, the receptor activator of NF-κB ligand (RANKL)-binding peptide, for the prophylactic injection to the alveolar bone. In vivo micro-computed tomography revealed bone dehiscence with decreased buccal alveolar bone thickness and height after force application, whereas no bone dehiscence was observed with the prophylactic injection after force application, and alveolar bone thickness and height were kept at similar levels as those in the control group. Bone histomorphometry analyses revealed that both bone formation and resorption parameters were significantly higher in the injection with force application group than in the force application without the prophylactic injection group. These findings suggest that the prophylactic local delivery of bone anabolic reagents can prevent bone dehiscence with increased bone remodelling activity.

Reduction of osteoclast formation and survival following suppression of cytokines by diacerein in periodontitis.

Periodontitis causes an increase in several bioactive agents such as interleukins (IL), tumor necrosis factor (TNF)-α and receptor activator of NF-kB ligand (RANKL), which induce the osteoclast formation and activity. Since diacerein exerts anti-TNF-α and anti-IL-1 effects, alleviating bone destruction in osteoarthritis, we investigated whether this drug inhibits the formation and survival of osteoclast in the periodontitis. Rats were distributed into 3 groups: 1) group with periodontitis treated with 100 mg/kg diacerein (PDG), 2) group with periodontitis treated with saline (PSG) and group control (CG) without any treatment. After 7, 15 and 30 days, the maxillae were collected for light and transmission electron microscopy analyses. Gingiva samples were collected to evaluate the mRNA levels for Tnf, Il1b, Tnfsf11 and Tnfrsf11b by RT-qPCR. In PDG, the expression of Tnf and Il1b genes reduced significantly compared to PSG, except for Tnf expression at 7 days. The number of osteoclasts reduced significantly in the PDG in comparison with PSG at 7 and 15 days. In all periods, the IL-6 immunoexpression, RANKL/OPG immunoexpression and mRNA levels of Tnfsf11/Tnfrsf11b ratio were significantly lower in PDG than in PSG. PDG exhibited significantly higher frequency of TUNEL-positive osteoclasts than in PSG and CG at all time points. Osteoclasts with caspase-3-immunolabelled cytoplasm and nuclei with masses of condensed chromatin were observed in PDG, confirming osteoclast apoptosis. Diacerein inhibits osteoclastogenesis by decreasing Tnf and Il1b mRNA levels, resulting in decreased RANKL/OPG ratio, and induces apoptosis in osteoclasts of alveolar process of rat molars with periodontitis.

Neuroprotective macromolecular methylprednisolone prodrug nanomedicine prevents glucocorticoid-induced muscle atrophy and osteoporosis in a rat model of spinal cord injury.

To address the adverse side effects associated with systemic high-dose methylprednisolone (MP) therapy for acute spinal cord injury (SCI), we have developed a N-2-hydroxypropyl methacrylamide copolymer-based MP prodrug nanomedicine (Nano-MP). Intravenous Nano-MP selectively targeted to the inflamed SCI lesion and significantly improved neuroprotection and functional recovery after acute SCI. In the present study, we comprehensively assessed the potential adverse side effects associated with the treatment in the SCI rat models, including reduced body weight and food intake, impaired glucose metabolism, and reduced musculoskeletal mass and integrity. In contrast to free MP treatment, intravenous Nano-MP after acute SCI not only offered superior neuroprotection and functional recovery but also significantly mitigated or even eliminated the aforementioned adverse side effects. The superior safety features of Nano-MP observed in this study further confirmed the clinical translational potential of Nano-MP as a highly promising drug candidate for better clinical management of patients with acute SCI.

Effect of vertical implant position on marginal bone loss: a randomized clinical trial.

OBJECTIVES: One of the most important factors that has influence on dental implants success rate is marginal bone loss. The purpose of this study is to investigate the effect of the implant's vertical position and the soft tissue's thickness on the rate of marginal bone loss of the dental implant. MATERIALS AND METHODS: In this single-blind randomized clinical trial study, 56 implants placed in the posterior region of mandible of 33 patients (19 women, 14 men) were divided into two groups. The group of crestal (28 implants) and subcrestal (28 implants) implants, each group was divided into two sub-groups with soft tissue thickness of 2 mm and less than 2 mm (14 implants) and more than 2 mm (14 implants). The amount of marginal bone loss was measured by Scanora 5.2 program with radiographs Digital parallelism based on the effect of the vertical position of the implant, soft tissue thickness, three months after placement, and three months after loading implants (six months after implant placement). RESULTS: The results showed that marginal bone loss in subcrestal implants is significantly more than crestal implants (p-value = 0.001), and also marginal bone loss in the soft tissue thickness group of 2 mm and less is significantly more than the group of soft tissue thickness more than 2 mm (p-value < 0.001). The amount of marginal bone loss three months after implant loading was significantly higher than three months after implant placement (p-value < 0.001). CONCLUSION: The implant's vertical position and the soft tissue's thickness around the implant are effective factors in the amount of marginal bone loss. Marginal bone loss is more in subcrestal implants and in cases with less soft tissue thickness. The time factor significantly affects the amount of marginal bone loss. TRIAL REGISTRATION: this clinical trial was registered at Iranian Registry of Clinical Trials, registration number IRCT20120215009014N415, registration date 20,220,110, (https//en.irct.ir/trial/60,991).

A Multivariate Logistic Regression Analysis of Risk Factors for Peri-implant Bone Loss.

OBJECTIVE: To evaluate multiple risk factors of peri-implant bone loss. MATERIALS AND METHODS: A case-control study was conducted on patients who had received dental implants treatment from January 2018 to December 2021. Implants with bone loss were included in the case group, and implants with no bone loss were included in the control group. Risk factors including history of periodontitis, abutment connection type, implant surface, diameter, location, three-dimensional position, opposing dentition, adjacent teeth, prosthetic type, retention type and custom abutment were evaluated. A multivariate logistic regression model was used to evaluate these risk factors, providing corresponding odds ratios (ORs) with 95% confidence intervals (CIs). RESULTS: A total of 776 implants in 479 patients were included in the analysis. The number of implants in the case group and the control group were 84 and 692, respectively. Cement-retained prostheses (OR=2.439, 95%CI=1.241-4.795) and nonplatform switch design (OR=2.055, 95%CI=1.167-3.619) were identified as weak risk factors. Horizontal deviation (OR=4.177, 95%CI=2.265-7.703) was a moderate risk factor. Vertical deviation (OR=10.107, 95%CI=5.280-19.347) and implants located in the mandibular molar region (OR=10.427, 95%CI=1.176-92.461) were considered high risk factors. CONCLUSION: Implants in the molar region, cement retained, non-platform switch design, and poor three-dimensional implant positioning are identified as significant risk factors for peri-implant bone loss.