Nitrosamine formation driven by electrochemical chlorination of urine-containing source waters: Effects of operational conditions.

We investigated the formation of nitrosamines from urine during electrochemical chlorination (EC) using dimensionally stable anodes. Short-term electrolysis (< 1 h) of urine at 25 mA cm-2 generated seven nitrosamines (0.1-7.4 µg L-1), where N-nitrosodimethylamine, N-nitrosomethylethylamine, and N-nitrosodiethylamine were predominant with concentrations ranging from 1.2 to 7.4 µg L-1. Mechanistic studies showed that the formation kinetics of nitrosamines was influenced by urine aging and composition, with fresh urine generating the highest levels (0.9-5.8 µg L-1) compared with aged, centrifuged, or filtered urine (0.2-4.1 µg L-1). Concurrently, studies on urine pretreatment through filtration and centrifugation underscored the significance of nitrogenous metabolites (such as protein-like products and urinary amino acids) and particle-associated humic fractions in nitrosamine formation during EC of urine. This finding was confirmed through chromatographic and spectroscopic studies utilizing LCOCD, Raman spectra, and 3DEEM fluorescence spectra. Parametric studies demonstrated that the ultimate [nitrosamines] increased at a pH range of 4.5-6.2, and with increasing [bromide], [ammonium], and current density. Conversely, sulfate and carbonate ions inhibited nitrosamine formation. Moreover, the implications of EC in urine-containing source waters were evaluated. The results indicate that regardless of the urine source (individual volunteers, septic tank, swimming pool, untreated municipal wastewater), high levels of nitrosamines (0.1-17.6 µg L-1) were generated, surpassing the potable reuse guideline of 10 ng L-1. Overall, this study provides insights to elucidate the mechanisms underlying nitrosamine formation and optimize the operating conditions. Such insights facilitate suppressing the generation of nitrosamine byproducts during electrochemical treatment of urine-containing wastewater.

Proper application of DNA dyes in agarose gel electrophoresis.

Various dyes are used to visualize DNA bands in agarose gel electrophoresis (AGE) by the methods of pre- or post-staining. The DNA dye user's guides generally state that the binding of the dye to DNA will affect DNA mobility in electrophoresis, thus recommending post-staining for accurate measurement of DNA size. However, many AGE performers prefer pre-staining procedures for reasons such as convenience, real-time observation of DNA bands, and/or the use of a minimal amount of dye. The detrimental effect of the dye on DNA mobility and the associated risk for inaccurate measurement of DNA size are often overlooked by AGE performers. Here we quantitatively determine the impact on DNA migration imposed by frequently used dyes, including GelRed, ethidium bromide (EB), and Gold View. It was observed that pre-staining with GelRed and EB significantly slowed down DNA migration to cause as much as 39.1% overestimation on the size of sample DNA, whereas Gold View had little effect. The slowdown of DNA migration increased with dye concentration until it plateaued when the dye concentration reached a saturated level. Thus, to take advantage of pre-staining, saturated levels of DNA dyes should always be applied for both DNA samples and DNA markers to ensure a fair comparison of DNA sizes. In addition, GelRed and EB display much higher sensitivity than Gold View in the detection of DNA bands in post-staining. The saturated concentrations, cost considerations, and other useful features of these frequently used dyes are summarized for the information of AGE performers.

Lattice Manipulation with Di-Tertiary Ammonium Spacer in Bismuth Bromide Perovskite Directs Efficient Charge Transport and Suppressed Ion Migration for Photodetector Applications.

Bismuth halide hybrid perovskites have emerged as promising alternatives to their lead halide homologs because of high chemical stability, low toxicity, and structural diversity. However, their advancements in optoelectronic field are plagued with poor charge transport, due to considerable microstrain triggered by bulky spacer. Herein, the di-tertiary ammonium spacer (N,N,N',N'-tetramethyl-1,4-butanediammonium, TMBD) is explored to direct stable 1D bismuth bromide lattice structure with relaxed microstrain. Compared to the primary pentamethylenediamine (PD)2+, the (TMBD)2+ adopting alternating alignment enables a unique H-bonds mode to distort the configuration of inorganic layers to form corner-sharing [BiBr5] near-regular chains with narrower bandgap, lower exciton binding energy, and reduced carrier-lattice interactions, thereby facilitating charge-carrier transport. Moreover, the (TMBD)2+ spacers largely suppress ion migration in perovskite lattice, as substantiated by the experimental and theoretical investigations. Consequently, (TMBD)BiBr5 single crystal photodetector delivers a 185-fold increase in current on/off ratio with respect to (PD)BiBr5 under white light irradiation, considerable responsivity (≈82.97 mA W-1), detectivity (≈8.06 ×1011 Jones) under weak light (0.02 mW cm-2) irradiation, in the top rank of the reported hybrid bismuth halide perovskites. This finding offers novel design criterion for high-performance lead-free perovskites.

Effect of different doses of Budesonide combined with Tiotropium bromide inhalation on elderly patients with chronic obstructive pulmonary disease.

Objective: To explore the clinical effect of various doses of Budesonide combined with Tiotropium bromide in the treatment of elderly patients with chronic obstructive pulmonary disease (COPD). Methods: Clinical data of elderly patients with COPD, admitted to Affiliated Hospital of Shaoxing University from April 2021 to February 2023, were retrospectively analyzed. Based on the dosage of Budesonide combined with Tiotropium bromide, patients were divided into Low-dose group (Budesonide = 1mg), Medium-dose group (Budesonide = 2mg), and High-dose group (Budesonide = 3mg). All groups were matched for age, gender, course of disease, and BMI. Patients treated with Tiotropium bromide alone were assigned to the Control group. The clinical effect, pulmonary function index level, symptom improvement, inflammatory factor index level and adverse reactions in all groups were analyzed and compared. Results: A total of 88 patients were included in this study with 22 patients in each group. The total efficacy of Medium-dose (90.91%) and High-dose group (90.91%) was significantly higher than that of Low-dose group (63.64%) and the Control group (59.09%) (P<0.05). After the treatment, levels of pulmonary function, symptom improvement and inflammatory factors in the High-dose and the Medium-dose groups were better than those in the Low-dose group and the Control group. Pulmonary function, symptom improvement and levels of inflammatory factors was significantly better in the Low-dose group compared to the Control group (P<0.05). Conclusions: Budesonide combined with tiotropium bromide is better than tiotropium bromide alone in the treatment of elderly patients with COPD. Compared with low (1mg) dosage, medium (2mg) and high (3mg) dosage of budesonide are more effective in improving lung function, alleviating symptoms, reducing inflammatory response,, and are not associated with increased rate of adverse reactions.

Thonzonium bromide inhibits progression of malignant pleural mesothelioma through regulation of ERK1/2 and p38 pathways and mitochondrial uncoupling.

BACKGROUND: Malignant Pleural Mesothelioma (MPM) is a rare malignancy with a poor prognosis. Current therapies are unsatisfactory and novel cures are urgently needed. In a previous drug screening, we identified thonzonium bromide (TB) as one of the most active compounds against MPM cells. Since the biological effects of TB are poorly known, in this work we departed from some hints of previous studies and investigated several hypotheses. Moreover, we evaluated the efficacy of TB in an in vivo xenograft rodent model. METHODS: In vitro assessment was made on five MPM (Mero-14, Mero-25, Ren, NCI-H28, MSTO-211H) and one SV40-immortalized mesothelial cell line (MeT-5A). We evaluated TB ability to affect proliferation, apoptosis, mitochondrial functions and metabolism, and the mevalonate pathway. In vivo assay was carried out on MPM-xenograft NOD-SCID mice (4 mg/kg delivered intraperitoneally, twice a week for 4 weeks) and the overall survival was analysed with Kaplan-Meier curves. RESULTS: After TB treatment, we observed the suppression of ERK 1/2 phosphorylation, the increase of BAX expression and p38 phosphorylation. TB affected Ca2+ homeostasis in both mitochondrial and cytosolic compartments, it regulated the mitochondrial functioning, respiration, and ATP production as well as the mevalonate pathway. The in vivo study showed an increased overall survival for TB treated group vs. vehicle control group (P = 0.0076). CONCLUSIONS: Both in vitro and in vivo results confirmed the effect of TB on MPM and unravelled novel targets with translational potential.

Amphipathic Surfactant on Reconstructed Bismuth Enables Industrial-Level Electroreduction of CO2 to Formate.

Developing efficient electrocatalysts for selective formate production via the electrochemical CO2 reduction reaction (CO2RR) is challenged by high overpotential, a narrow potential window of high Faradaic efficiency (FEformate), and limited current density (Jformate). Herein, we report a hierarchical BiOBr (CT/h-BiOBr) with surface-anchored cetyltrimethylammonium bromide (CTAB) for formate-selective large-scale CO2RR electrocatalysis. CT/h-BiOBr achieves over 90% FEformate across a wide potential range (-0.5 to -1.1 V) and an industrial-level Jformate surpassing 100 mA·cm-2 at -0.7 V. In situ investigations uncover the reconstructed Bi(110) surface as the active phase, with CTAB playing a dual role: its hydrophobic alkyl chains create a CO2-enriching microenvironment, while its polar head groups fine-tune the electronic structure, fostering a highly active phase. This work provides valuable insights into the role of surfactants in electrocatalysis and guides the design of electrocatalysts for the large-scale CO2RR.

Amino Acid-Conjugated Polymer-Silver Bromide Nanocomposites for Eradicating Polymicrobial Biofilms and Treating Burn Wound Infections.

The rise in antimicrobial resistance, the increasing occurrence of bacterial, and fungal infections, and the challenges posed by polymicrobial biofilms necessitate the exploration of innovative therapeutic strategies. Silver-based antimicrobials have garnered attention for their broad-spectrum activity and multimodal mechanisms of action. However, their effectiveness against single-species or polymicrobial biofilms remains limited. In this study, we present the fabrication of polymer-silver bromide nanocomposites using amino acid conjugated polymers (ACPs) through a green and water-based in situ technique. The nanocomposite architecture facilitated prolonged and controlled release of the active components. Remarkably, the nanocomposites exhibited broad-spectrum activity against multidrug-resistant (MDR) human pathogenic bacteria (MIC = 2-16 µg/mL) and fungi (MIC = 1-8 µg/mL), while displaying no detectable toxicity to human erythrocytes (HC50 > 1024 µg/mL). In contrast to existing antimicrobials and silver-based therapies, the nanocomposite effectively eradicated bacterial, fungal, and polymicrobial biofilms, and prevented the development of microbial resistance due to their membrane-active properties. Furthermore, the lead polymer-silver bromide nanocomposite demonstrated a 99% reduction in the drug-resistant Pseudomonas aeruginosa burden in a murine model of burn wound infection, along with excellent in vivo biocompatibility.

Crystal structure and Hirshfeld surface analysis of 2-bromo-ethyl-ammonium bromide - a possible side product upon synthesis of hybrid perovskites.

This study presents the synthesis, characterization and Hirshfeld surface analysis of a small organic ammonium salt, C2H7BrN+·Br-. Small cations like the one in the title compound are considered promising components of hybrid perovskites, crucial for optoelectronic and photovoltaic applications. While the incorporation of this organic cation into various hybrid perovskite structures has been explored, its halide salt counterpart remains largely uninvestigated. The obtained structural results are valuable for the synthesis and phase analysis of hybrid perovskites. The title compound crystallizes in the solvent-free form in the centrosymmetric monoclinic space group P21/c, featuring one organic cation and one bromide anion in its asymmetric unit, with a torsion angle of -64.8 (2)° between the ammonium group and the bromine substituent, positioned in a gauche conformation. The crystal packing is predominantly governed by Br⋯H inter-actions, which constitute 62.6% of the overall close atom contacts.

Otilonium Bromide Exhibits Potent Antifungal Effects by Blocking Ergosterol Plasma Membrane Localization and Triggering Cytotoxic Autophagy in Candida Albicans.

Candidiasis, which presents a substantial risk to human well-being, is frequently treated with azoles. However, drug-drug interactions caused by azoles inhibiting the human CYP3A4 enzyme, together with increasing resistance of Candida species to azoles, represent serious issues with this class of drug, making it imperative to develop innovative antifungal drugs to tackle this growing clinical challenge. A drug repurposing approach is used to examine a library of Food and Drug Administration (FDA)-approved drugs, ultimately identifying otilonium bromide (OTB) as an exceptionally encouraging antifungal agent. Mechanistically, OTB impairs vesicle-mediated trafficking by targeting Sec31, thereby impeding the plasma membrane (PM) localization of the ergosterol transporters, such as Sip3. Consequently, OTB obstructs the movement of ergosterol across membranes and triggers cytotoxic autophagy. It is noteworthy that C. albicans encounters challenges in developing resistance to OTB because it is not a substrate for drug transporters. This study opens a new door for antifungal therapy, wherein OTB disrupts ergosterol subcellular distribution and induces cytotoxic autophagy. Additionally, it circumvents the hepatotoxicity associated with azole-mediated liver enzyme inhibition and avoids export-mediated drug resistance in C. albicans.

Effective Transport Recovery of Palladium(II) from Hydrochloric Acid Solutions Using Polymer Inclusion Membrane with Tetrabutylammonium Bromide.

This article reports on the extraction of palladium(II) from hydrochloric acid (HCl) solutions using polymer inclusion membranes (PIMs) containing tetrabutylammonium bromide (TBAB) as the ion carrier. The membranes were based on cellulose triacetate (CTA) as the polymer support. The main aim of this study is to determine the possibility of TBAB's application as the effective ion carrier/extractant of Pd(II) from hydrochloric acid solutions. At first, the effect of the hydrochloric acid concentration in the aqueous phase on palladium(II) extraction was investigated. Next, cellulose triacetate membranes with TBAB as the carrier were prepared and applied for the recovery of Pd(II) from HCl solutions. As a result of the investigations, the optimal composition of the receiving phase was determined to be 0.5 M thiourea in 0.1 M hydrochloric acid. The effect of the acid concentration in the source phase was investigated. The results show a linear decrease in the permeability coefficient and initial flux of palladium(II) with an increase in the hydrochloric acid concentration in the source phase. The separation of Pd(II) from Pt(IV) from the hydrochloric acid solution was also studied. The transport rate of Pd(II) was higher than Pt(IV). The separation coefficient SPd/Pt was 1.3. The results show that transport through PIMs with TBAB can be used as an effective method to recover Pd(II) from hydrochloric acid, especially at a low concentration of this acid.

ROS responsive hydrogel for inhibition of MUC5AC against allergic rhinitis: A new delivery strategy for Ipratropium Bromide.

Allergic rhinitis (AR) is a chronic inflammatory disease of the nasal mucosa mediated by immunoglobulin E (IgE) after exposure to allergens. The bothersome symptoms of AR, such as runny nose and nasal congestion, affect millions of people worldwide. Ipratropium Bromide (IB), commonly used in clinical practice for treating AR, requires frequent administration through nasal spray and may cause significant irritation to the nasal mucosa. The induction of ROS is closely related to the initiation and symptoms of AR, and ROS will continue to accumulate during the onset of AR. To address these challenges, we have designed a drug delivery system that can be administered in liquid form and rapidly crosslink into a ROS-responsive gel in the nasal cavity. This system enables sustained ROS responsive release of IB in a high-concentration ROS environment at AR lesions, thereby alleviating AR symptoms. The gel demonstrated prolonged release of IB for up to 24 hours in rats. In the treatment of AR rat models, it improved their symptoms, reduced the expression of various inflammatory factors, suppressed MUC5AC protein expression, and decreased mucus secretion through a ROS responsive IB release pattern. Overall, this system holds promise as a better option for AR treatment and may inspire the design of nanogel-based nasal drug delivery systems.

Pyridostigmine for the Management of Neurogenic Orthostatic Hypotension: A Systemic Review.

BACKGROUND: Pyridostigmine is hypothesized to improve neurogenic orthostatic hypotension (nOH) symptoms without causing or exacerbating supine hypertension. The objective of this review was to evaluate the safety and efficacy of pyridostigmine for management of nOH. METHODS: A literature search of PubMed, Embase, and CENTRAL was performed in December 2023 for prospective trials with a placebo or active comparator. RESULTS: Four randomized and two non-randomized studies were reviewed. Three studies utilizing a single dose, crossover design found significant differences of orthostatics using adjunctive pyridostigmine. Two studies assessing longer-term endpoints demonstrated conflicting efficacy of pyridostigmine with one trial finding significant improvement in orthostatics and symptoms after three months of therapy. Use of pyridostigmine did not lead to supine hypertension with most adverse effects being cholinergic. CONCLUSION: Pyridostigmine may be considered as an adjunctive medication in individuals with nOH refractory to standard treatment options as it carries a favorable safety profile with low risk for supine hypertension.

Investigation of the role of Cremophor RH 40 and Cremophor EL in the inhibition of efflux pump of Pseudomonas aeruginosa.

Background: There is increasing emphasis on restoring the efficacy of existing antibiotics instead of developing new ones. Objectives: This study aimed to determine the role of Cremophor EL and Cremophor RH40 in the inhibition of efflux pumps in MDR Pseudomonas aeruginosa strains. Methods: Efflux pump-active MDR strains of P. aeruginosa were identified and confirmed by flow cytometry. The identified efflux-active strains were further subjected to determination of the MIC of ciprofloxacin and the synergistic role of non-ionic surfactants (Cremophor EL and Cremophor RH40) along with ciprofloxacin. Results: Out of 30 samples, 6 strains displayed high efflux pump activity. Both Cremophor EL and Cremophor RH40 showed efflux pump inhibitory roles. A 4-fold reduction in the MIC values of ciprofloxacin was observed when Cremophor EL was used along with ciprofloxacin, while a 6-fold reduction was observed when Cremophor RH40 was used along with ciprofloxacin. Both compounds showed synergistic effects with ciprofloxacin, ticarcillin and meropenem when used in a 24-well plate efflux pump inhibitory assay. Conclusion: The inhibition of the efflux pump of MDR Pseudomonas aeruginosa by non-ionic surfactants, namely, Cremophor RH40 and Cremophor EL, provided the best strategy to restore the efficacy of ciprofloxacin.

Long-term exposure to ionic liquid [C8mim]Br induces the potential risk of anxiety and memory deterioration through disturbing neurotransmitter systems.

1-octyl-3-methylimidazolium bromide ([C8mim]Br), one of the ionic liquids (ILs), has been used in various fields as an alternative green solvent of conventional organic solvents. Increased application and stabilization of imidazole ring structure lead to its release into the aquatic environment and long-term retention. Structure-activity relationship consideration suggested that ILs may be acetylcholinesterase inhibitors; however, neurotoxicity in vivo, especially the underlying mechanisms is rarely studied. In this study, the zebrafish were exposed to 2.5-10 mg/L [C8mim]Br for 28 days to comprehensively evaluate the neurotoxicity of ILs on adult zebrafish from the behavioral profiles and neurotransmitter systems for the first time. The results indicate that zebrafish exhibit suppressed spatial working memory and anxious behaviors. To assess the potential neurotoxic mechanisms underlying the behavioral responses of zebrafish, we measured the levels of neurotransmitters and precursors, key enzyme activities, and expression levels of relevant genes. Nissl staining showed significant neural cell death in zebrafish after 28-day [C8mim]Br exposure, with corresponding decreases in the levels of neurotransmitters (acetylcholine, glutamate, 5-hydroxytryptophan, gamma-aminobutyric acid, dopamine, and norepinephrine). Furthermore, these results were associated with mRNA expression levels of the disrupted neurotransmitter key genes (th, tph2, mao, slc6a3, ache, gad67). Overall, our study determined that [C8mim]Br caused potential mental disorders like anxiety and memory deterioration in zebrafish by impairing neurotransmitter systems, providing recommendations for the industrial production and application of [C8mim]Br.

Enhanced Cr(VI) removal via CPBr-modified MIL-88A@amine-functionalized GO: synthesis, performance, and mechanism.

Water contamination by heavy metals, especially chromium (VI), poses a critical environmental issue due to its carcinogenic nature and persistence in the environment. Addressing this, the current study develops an efficient adsorbent, CPBr-MIL-88A@AmGO, which utilizes the synergistic capabilities of Cetylpyridinium bromide-modified MIL-88A and amine-functionalized graphene oxide to enhance Cr(VI) removal from aqueous solutions. The obtained results indicate that CPBr-MIL-88A@AmGO achieves its highest removal efficacy at pH 2, where the interaction of CPBr and AmGO's positively charged centers significantly contributes to the adsorption processes. According to the Langmuir isotherm model, the composite's adsorption capacity reached a maximum of 306.75 mg/g. The adsorption kinetics adhered to a pseudo-second-order model along with the endothermic nature of the process. Although the presence of SO42- ions significantly reduces adsorption capacity, other interfering ions including Na+, K+, Ca2+, Cl-, and NO3- only slightly affect it. Remarkably, the composite maintains high removal efficiency, over 82%, even after 7 recycling tests, underscoring its potential for practical applications in water treatment systems. The proposed mechanism involves the contribution of electrostatic attractions, ion exchange, complexation, and the reduction of Cr(VI) to Cr(III) in the removal process. This study not only offers a potent solution for Cr(VI) remediation but also contributes to sustainable water resource management.

Interaction mechanism and compatibility studies of silk protein peptide (SPP) with the common surfactants SDS and DTAB.

The molecular interaction of low-molecular-weight SPP with common surfactants (SDS and DTAB) is a more complicated process than has been long believed. In this work, the interaction mechanism between SDS/DTAB and SPP was proposed using multiple methods including conductivity measurements, ST, UV-vis, FT-IR, DLS, fluorescence spectroscopy, and molecular docking simulations. Moreover, the foaming properties of the mixed systems were studied, and they were evaluated as cosmetics preservatives. The effects of various surfactant and protein concentrations and ratios on compatibility and functionality were studied. Based on the results, the mechanism of complex formation was identified as a cooperative van der Waals interaction followed by hydrophobic interaction and hydrogen bonding. A simpler head group leads to easier aggregation and interaction with the SPP, the formation of smaller-sized complexes, and a weaker impact on the fluorescence intensity. Thus, SDS monomers easily aggregate on SPP chains, leading to a stronger influence on the final secondary structure of SPP. This was confirmed by multiple spectroscopy methods. Comparing its single surfactant system, the SDS-SPP solution demonstrates better foaming power and the DTAB-SPP solution shows higher bacteriostatic activity. The good compatibility between SDS/DTAB and SPP can improve the functional properties of SDS or DTAB as well as lower the optimal concentration of each component. These results provide data and theoretical support for the design of cosmetic product formulas.

Toward Scalable Electrochemical Exfoliation of Molybdenum Disulfide Powder through an Accessible Electrode Design.

Cathodic electrochemical intercalation/exfoliation of transition metal dichalcogenides (TMDs) with bulky tetraalkylammonium-based cations is gaining popularity as it avoids the semiconducting (2H) to metallic (1T) phase transformation in TMDs like molybdenum disulfide (MoS2) and, generally, produces sheets with a larger aspect ratio - important for achieving conformal sheet-to-sheet contact in optoelectronic devices. Large single crystals are typically used as the precursor, but these are expensive, often inaccessible, and result in limited quantities of material. In this paper, a 3D-printable electrochemical cell capable of intercalating gram-scale quantities of commercially available TMD powders is presented. By incorporating a reference electrode in the cell and physically restraining the powder with a spring-loaded mechanism, the system can probe the intercalation electrochemistry, for example, determining the onset of intercalation to be near -2.5 V versus the ferrocene redox couple. While the extent of intercalation depends on precursor quantity and reaction time, a high yield of exfoliated product can be obtained exhibiting average aspect ratios as high as 49 ± 44 similar to values obtained by crystal intercalation. The intercalation and exfoliation of a wide variety of pelletized commercial powders including molybdenum diselenide (MoSe2), tungsten diselenide (WSe2), tungsten disulfide (WS2), and graphitic carbon nitride (gCN) are also demonstrated.

Exposing the latent phenotype of Gulf War Illness: examination of the mechanistic mediators of cognitive dysfunction.

Though it has been over 30 years since the 1990-1991 Gulf War (GW), the pathophysiology of Gulf War Illness (GWI), the complex, progressive illness affecting approximately 30% of GW Veterans, has not been fully characterized. While the symptomology of GWI is broad, many symptoms can be attributed to immune and endocrine dysfunction as these critical responses appear to be dysregulated in many GWI patients. Since such dysregulation emerges in response to immune threats or stressful situations, it is unsurprising that clinical studies suggest that GWI may present with a latent phenotype. This is most often observed in studies that include an exercise challenge during which many GWI patients experience an exacerbation of symptoms. Unfortunately, very few preclinical studies include such physiological stressors when assessing their experimental models of GWI, which creates variable results that hinder the elucidation of the mechanisms mediating GWI. Thus, the purpose of this review is to highlight the clinical and preclinical findings that investigate the inflammatory component of GWI and support the concept that GWI may be characterized as having a latent phenotype. We will mainly focus on studies assessing the progressive cognitive impairments associated with GWI and emphasize the need for physiological stressors in future work to create a more unified hypothesis that can identify potential therapeutics for this patient population.

Sulfuryl Fluoride Fumigation as a Quarantine Treatment for the Control of Reticulitermes speratus Kolbe (Blattodea: Rhinotermitidae) in Wood.

High-risk termites in wood imported to the Republic of Korea are currently treated with methyl bromide (MB), which has ozone-depleting properties and is highly toxic. This study evaluated the effectiveness of sulfuryl fluoride (SF) as a quarantine treatment against Reticulitermes speratus Kolbe (Blattodea: Rhinotermitidae) in wood, along with its wood sorption and penetration capacity. The LCt50 and LCt99 values for SF were 30.87 and 42.53 mg h/L at 23 °C and 151.62 and 401.9 mg h/L at 5 °C, respectively. The SF Ct values did not significantly differ between dry and wet wood at loading ratios of 10%, 30%, and 50% at both 5 °C and 23 °C (p > 0.05). In a closed wooden cube, the LCt50 and LCt99 for SF for R. speratus were 31.59 and 53.34 mg h/L, respectively, indicating an excellent wood penetration ability. SF caused 100% termite mortality with a 90% loading ratio in the scale-up trials (500 L). The SF concentration during ventilation decreased below the threshold limit value (TLV) of 5 ppm within 30 min, confirming that the working conditions were safe. This study provides a basis for the use of SF as an alternative to MB for the treatment of termites in wood.

The new phthalic acid-based deep eutectic solvent as a versatile catalyst for the synthesis of pyrimido[4,5-d]pyrimidines and pyrano[3,2-c]chromenes.

A new DES (MTPPBr-PHTH-DES) was prepared from a mixture of methyltriphenyl-phosphonium bromide (MTPPBr) and phthalic acid (PHTH). The eutectic point phase diagram showed that a one-to-one molar ratio of MTPPBr to PHTH is the optimal molar ratio for the synthesis of new DES. Then, it was characterized with various techniques such as FT-IR, TGA/DTA, densitometer, eutectic point, and NMR and used as a novel acid catalyst in the synthesis of pyrimido[4,5-d]pyrimidines and pyrano[3,2-c]chromes in solvent-free condition. Short reaction time, low temperature, high efficiency, green condition, and easy recycling and separation of the DES catalyst are among the most important features of the presented method.