Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 965
Filtrar
1.
Small Methods ; : e2400945, 2024 Aug 04.
Artigo em Inglês | MEDLINE | ID: mdl-39097952

RESUMO

Tumor photodynamic therapy (PDT) relies on intratumoral free radicals, while the limited oxygen source and the depletion of tissue oxygen may exacerbate the hypoxia. As the treatment progresses, there will eventually be a problem of insufficient free radicals. Here, it is found that Au@CeO2 nano-rods (Au@Ce NRs), assembled by gold nano-rods (Au NRs) and ceria nanoparticles (CeO2 NPs), can efficaciously absorb near-infrared light (NIR) to promote the release of oxygen and free radicals. Au@Ce NRs exhibit a higher proportion of Ce3+ (Ce2O3) after oxygen release, while Ce3+ is subsequently oxidized to Ce4+ (CeO2) by trace H2O2. Interestingly, Au@Ce NRs re-oxidized by trace H2O2 can re-releasing oxygen and free radicals again upon NIR treatment, achieving oxygenation/oxygen evolution, similar to charging/discharging. This loop maximizes the conversion of limited oxygen source into highly cytotoxic free radicals. As a result, when B16-F10 cells are treated by NIR/Au@Ce NRs, more tumor cells undergo apoptosis, consistent with the higher level of free radicals. Importantly, NIR/Au@Ce NRs successfully suppresses tumor growth and promotes the generation of epidermal collagen fibers in the transplanted tumor model. Therefore, the rod-shaped Au@Ce NRs provide an ideal platform for maximizing the utilization of intratumoral oxygen sources and improving the treatment of melanoma.

2.
Luminescence ; 39(8): e4840, 2024 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-39109476

RESUMO

The study presents Ag2CrO4/Fe2O3/CeO2 ternary nanocomposite, based on Fe2O3/CeO2 binary composites, which demonstrated excellent photocatalytic performance in the photodegradation of methylene blue under solar irradiation. The Ag2CrO4/Fe2O3/CeO2 nanocomposites was orthorhombic, ilmenite, and cubic-fluorite phases of Ag2CrO4, Fe2O3, and CeO2, respectively, according to the XRD examination. A strong bond between Ag2CrO4, Fe2O3, and CeO2 within the nanocomposite was demonstrated by the SEM and TEM investigations. Moreover, it was discovered that the coupling of Ag2CrO4 and Fe2O3 caused a red shift and moved CeO2 absorption edge from the UV to the visible spectrum. The reason behind this is that the band gap of CeO2 reduced 2.85 to 2.69 eV and the absorbance band intensity increased in visible region. Utilizing visible light, Ag2CrO4/Fe2O3/CeO2 ternary nanocomposites exhibit enhanced photocatalytic properties (98.90%) for the degradation of methylene blue (MB) within 100 min. The long-term reliability and recyclability of the photocatalyst were explored through 3 successive cycles. An active radical quenching test was conducted to elucidate the involvement of O2 - and OH which are the primary reactive species in the photocatalytic breakdown of MB. Ag2CrO4/Fe2O3/CeO2 ternary nanocomposites displayed notable improvements in photodegradation activity, making them well suited for the effective removal of hazardous dyes present in textile effluents.


Assuntos
Cério , Compostos Férricos , Azul de Metileno , Nanocompostos , Fotólise , Nanocompostos/química , Cério/química , Catálise , Azul de Metileno/química , Compostos Férricos/química , Processos Fotoquímicos , Compostos de Prata/química , Prata/química , Tamanho da Partícula
3.
Nanotechnology ; 35(45)2024 Aug 27.
Artigo em Inglês | MEDLINE | ID: mdl-39137791

RESUMO

Herein, we fabricated nanoscale 2D CeO2sheet structure to develop a stable resistive gas sensor for detection of low concentration (ppm) level formaldehyde vapors. The fabricated CeO2nanosheets (NSs) showed an optical band gap of 3.53 eV and cubic fluorite crystal structure with enriched defect states. The formation of 2D NSs with well crystalline phases is clearly observed from high-resolution transmission electron microscope (HRTEM) images. The NSs have been shown tremendous blue-green emission related to large oxygen defects. A VOC sensing device based on fabricated two-dimensional NSs has been developed for the sensing of different VOCs. The device showed better sensing for formaldehyde compared with other VOCs (2-propanol, methanol, ethanol, and toluene). The response was found to be 4.35, with the response and recovery time of 71 s and 310 s, respectively. The device showed an increment of the recovery time (71 s to 100 s) with the decrement of the formaldehyde ppm (100 ppm to 20 ppm). Theoretical fittings provided the detection limit of formaldehyde ≈8.86 ± 0.45 ppm with sensitivity of 0.56 ± 0.05 ppm-1. The sensor device showed good reproducibility with excellent stability over the study period of 135 d, with a deviation of 1.8% for 100 ppm formaldehyde. The average size of the NSs (≈24 nm) calculated from HRTEM observation showed lower value than the calculated Debye length (≈44 nm) of the charge accumulation during VOCs sensing. Different defect states, interstitial and surface states in the CeO2NSs as observed from the Raman spectrum and emission spectrum are responsible for the formaldehyde sensing. This work offers an insight into 2D semiconductor-based oxide material for highly sensitive and stable formaldehyde sensors.

4.
Nanomaterials (Basel) ; 14(15)2024 Jul 23.
Artigo em Inglês | MEDLINE | ID: mdl-39120343

RESUMO

This study investigated the synthesis of cerium oxide (CeO2) nanoparticles (NPs) and composites with reduced graphene oxide (rGO) for the enhanced electrochemical sensing of ammonia. CeO2 NPs were prepared by the focused laser ablation in liquid (LAL) method, which enabled the production of high-purity, spherical nanoparticles with a uniform dispersion and sizes under 50 nm in a short time. The effects of varying irradiation fluence and time on the nanoparticle size, production yield, and dispersion were systematically studied. The synthesized CeO2 NPs were doped with rGO to form CeO2/rGO composites, which were drop casted to modify the glassy carbon electrodes (GCE). The CeO2/rGO-GCE electrodes exhibited superior electrochemical properties compared with single-component electrodes, which demonstrated the significant potential for ammonia detection, especially at a 4 J/cm2 fluence. The CeO2/rGO composites showed uniformly dispersed CeO2 NPs between the rGO sheets, which enhanced the conductivity, as confirmed by SEM, EDS mapping, and XRD analysis. Cyclic voltammetry data demonstrated superior electrochemical activity of the CeO2/rGO composite electrodes, with the 2rGO/1CeO2 ratio showing the highest current response and sensitivity. The CV response to varying ammonia concentrations exhibited a linear relationship, indicating the electrode's capability for accurate quantification. These findings highlight the effectiveness of focused laser ablation in enhancing nanoparticle synthesis and the promising synergistic effects of CeO2 and rGO in developing high-performance electrochemical sensors.

5.
Chem Asian J ; : e202400752, 2024 Aug 11.
Artigo em Inglês | MEDLINE | ID: mdl-39129039

RESUMO

In this study, we utilized various Pr-doped CeO2 catalysts (Pr=5, 10, 20, and 30 wt.%) as a support medium for the dispersion of cobalt (Co) nanoparticles, aiming to investigate the impact of oxygen vacancies on the water-gas shift (WGS) reaction. Different characterization techniques were employed to understand the insights into the structure-activity relationship governing the performance of Pr doped ceria supported Co catalysts towards WGS reaction. Our findings reveal that Co/Pr-CeO2 catalysts at optimum Pr loading (10 wt.%) exhibit a superior CO conversion (88%) facilitated by the presence of more oxygen vacancies induced by Pr doping into the CeO2 lattice, as opposed to the performance of the pure Co/CeO2 catalytic system. It was also found that the highest activity was obtained at increased intrinsic oxygen vacancies and strong synergy between Co and Pr/CeO2 support, fostering more favorable CO activation at the interfacial sites, thus accounting for the observed enhanced activity.

6.
Artigo em Inglês | MEDLINE | ID: mdl-39134794

RESUMO

Chlorophenols are one of the major organic pollutants responsible for the contamination of water bodies. This study explores the application of Ni-Zn/CeO2 nanocomposites, synthesized via the aqueous co-precipitation method, as effective adsorbents for the 4-chlorophenol removal from aqueous solutions. The nanocomposites' chemical and structural characteristics were assessed using different physical characterization methods, viz. X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, zeta potential, using a Box-Behnken design within response surface methodology, optimal conditions of pH 3, temperature 20 °C, contact time 120 min, adsorbent dosage 0.05 g, and 4-chlorophenol concentration 50 ppm are identified. Among the nanocomposites tested, NZC 20:10:70, with 20% Ni and 10% Zn, achieves enhanced performance, removing 99.1% of 4-chlorophenol within 2 h. Adsorption kinetics follow the pseudo-second-order model and equilibrium data fit the Freundlich isotherm. Thermodynamic analysis indicates an exothermic and spontaneous process. The adsorption capacity of NZC 20:10:70 shows significant enhancement, growing from 19.85 mg/g at 10 ppm to 96.33 mg/g at 50 ppm initial concentration. Physical characterization confirms NZC 20:10:70's superior properties, including a high surface area of 118.471 m2/g. Evaluating economic viability, NZC 20:10:70 demonstrates robust reusability, retaining 85% efficiency over eight regeneration cycles. These results highlight NZC 20:10:70 as a promising adsorbent for effective and sustainable chlorophenol removal in water treatment.

7.
Angew Chem Int Ed Engl ; : e202411264, 2024 Aug 13.
Artigo em Inglês | MEDLINE | ID: mdl-39136438

RESUMO

The surface chemistry of CeO2 is dictated by the well-defined facets, which exert great influence on the supported metal species and the catalytic performance. Here we report Pt1/CeO2 catalysts exhibiting specific structures of Pt-O coordination on different facets by using adequate preparation methods. The simple impregnation method results in Pt-O3 coordination on the predominantly exposed {111} facets, while the photo-deposition method achieves oriented atomic deposition for Pt-O4 coordination into the "nano-pocket" structure of {100} facets at the top. Compared to the impregnated Pt1/CeO2 catalyst showing normal redox properties and low-temperature activity for CO oxidation, the photo-deposited Pt1/CeO2 exhibits uncustomary strong metal-support interaction and extraordinary high-temperature stability. The preparation methods dictate the facet-dependent diversity of Pt-O coordination, resulting in the further activity-selectivity trade-off. By applying specific preparation routes, our work provides an example of disentangling the effects of support facets and coordination environments for nano-catalysts.

8.
Artigo em Inglês | MEDLINE | ID: mdl-39136725

RESUMO

Ultrafine noble metals have emerged as advanced nanocatalysts in modern society but still suffer from unavoidable sintering at temperatures above 250 °C (e.g., Pt). In this work, closely packed CeO2 grains were confined elegantly in fibrous nanostructures and served as a porous support for stabilizing sub-3 nm Pt clusters. Through precisely manipulating the asymmetry of obtained nanofibers, uneven strain was induced within C-shaped CeO2 nanofibers with tensile strain at the outer side and compressive strain at the inner side. As a result, the enriched oxygen vacancies significantly improved adhesion of Pt to CeO2, thereby boosting the sinter-resistance of ultraclose sub-3 nm Pt clusters. Notably, no aggregation was observed even after exposure to humid air at 750 °C for 12 h, which is far beyond their Tammann temperature (sintering onset temperature, below 250 °C). In situ HAADF-STEM observation revealed a unique sintering mechanism, wherein Pt clusters initially migrate toward the grain boundaries with concentrated stain and undergo slight coalescence, followed by subsequent Ostwald ripening at higher temperatures. Moreover, the sinter-resistant Pt/C-shaped CeO2 effectively catalyzed soot combustion (over 700 °C) in a durable manner. This work provides a new insight for developing sinter-resistant catalysts from the perspective of strain engineering within nano-oxides.

9.
J Colloid Interface Sci ; 677(Pt B): 417-428, 2024 Aug 13.
Artigo em Inglês | MEDLINE | ID: mdl-39153245

RESUMO

Synthesis of catalysts with high catalytic degradation activity for formaldehyde (HCHO) at room temperature is highly desirable for indoor air quality control. Herein, a novel K-Mn3O4@CeO2 catalyst with excellent catalytic oxidation activity toward HCHO at near room temperature was reported. In particular, the K addition in K-Mn3O4@CeO2 considerably enhanced the oxidation activity, and importantly, 99.3 % conversion of 10 mL of a 40 mg/L HCHO solution at 30 °C for 14 h was achieved, with simultaneous strong cycling stability. Moreover, the addition of K species considerably influenced the chemical valence state of Mn from +4 (ε-MnO2) to +8/3 (Mn3O4) on the surface of CeO2, which obviously changed the tunnel structure and the number of oxygen vacancies. One part of K species is uniformly dispersed on K-Mn3O4@CeO2, and the other part exists in the tunnel structure of Mn3O4@CeO2, which is mainly used to balance the negative charge of the tunnel and prevent collapse of the structure, providing enough active sites for the catalytic oxidation of HCHO. We observed a phase transition from tunneled KMnO2 to Mn3O4 to tunneled MnO2 with the decreasing K+ content, in which K-Mn3O4@CeO2 exhibited higher HCHO oxidation activity. In addition, K-Mn3O4@CeO2 exhibited lower oxygen vacancy formation and HCHO adsorption energies in aqueous solution based on density functional theory calculations. This is because the K species provide more active oxygen species and richer oxygen vacancies on the surface of K-Mn3O4@CeO2, promote the mobility of lattice oxygen and the room-temperature reduction properties of oxygen species, and enhance the ability of the catalyst to replenish the consumed oxygen species. Finally, a possible HCHO catalytic oxidation pathway on the surface of K-Mn3O4@CeO2 catalyst is proposed.

10.
J Hazard Mater ; 477: 135366, 2024 Sep 15.
Artigo em Inglês | MEDLINE | ID: mdl-39088943

RESUMO

Deoxynivalenol-3-glucoside (D3G), the masked form of the important mycotoxin deoxynivalenol (DON), displays potential toxicity but is difficult to control owing to the lack of rapid detection methods. Herein, an innovative molecularly imprinted polymer (MIP)-based electrochemical sensor was developed for the rapid detection of D3G. MIP, an efficient recognition element for D3G, was electropolymerized using o-phenylenediamine based on a surface functional monomer-directing strategy for the first time. CeO2, which contains both Ce3+ and Ce4+ oxidation states, was introduced as a nanozyme to catalyze H2O2 reduction, while Mn doping generated more oxygen vacancies and considerably improved the catalytic activity. Mn-CeO2 also served as a promising substrate material because of its large surface area and excellent conductivity. Under optimal conditions, a good linear relationship was observed for D3G detection over the concentration range of 0.01-50 ng/mL. The proposed sensor could detect D3G down to 0.003 ng/mL with excellent selectivity, even distinguishing its precursor DON in complex samples. The sensor exhibited acceptable stability with high reproducibility and accuracy, and could successfully determine D3G in grain samples. To the best of our knowledge, this is the first electrochemical sensing platform for rapid D3G detection that can easily be expanded to other masked mycotoxins.


Assuntos
Cério , Técnicas Eletroquímicas , Manganês , Tricotecenos , Tricotecenos/análise , Tricotecenos/química , Cério/química , Manganês/química , Polímeros Molecularmente Impressos/química , Impressão Molecular , Polímeros/química , Reprodutibilidade dos Testes , Grão Comestível/química , Limite de Detecção , Glucosídeos/química , Glucosídeos/análise , Contaminação de Alimentos/análise , Peróxido de Hidrogênio/química , Peróxido de Hidrogênio/análise
11.
ACS Appl Mater Interfaces ; 16(32): 42198-42209, 2024 Aug 14.
Artigo em Inglês | MEDLINE | ID: mdl-39091093

RESUMO

Rare-earth doped CeO2 materials find extensive application in high-temperature energy conversion devices such as solid oxide fuel cells and electrolyzers. However, understanding the complex relationship between structural and electrical properties, particularly concerning rare-earth ionic size and content, remains a subject of ongoing debate, with conflicting published results. In this study, we have conducted comprehensive long-range and local order structural characterization of Ce1-xLnxO2-x/2 samples (x ≤ 0.6; Ln = La, Nd, Sm, Gd, and Yb) using X-ray and neutron powder diffraction, Raman spectroscopy, and electron diffraction. The increase in the rare-earth dopant content leads to a progressive phase transformation from a disordered fluorite structure to a C-type ordered superstructure, accompanied by reduced ionic conductivity. Samples with low dopant content (x = 0.2) exhibit higher ionic conductivity in Gd3+ and Sm3+ series due to lower lattice cell distortion. Conversely, highly doped samples (x = 0.6) exhibit superior conductivity for larger rare-earth dopant cations. Thermogravimetric analysis confirms increased water uptake and proton conductivity with increasing dopant concentration, while the electronic conductivity remains relatively unaffected, resulting in reduced ionic transport numbers. These findings offer insights into the relationship between transport properties and defect-induced local distortions in rare-earth doped CeO2, suggesting the potential for developing new functional materials with mixed ionic oxide, proton, and electronic conductivity for high-temperature energy systems.

12.
Small ; : e2404608, 2024 Aug 23.
Artigo em Inglês | MEDLINE | ID: mdl-39177179

RESUMO

Elaborated structural modulation of Pt-based artificial nanozymes can efficiently improve their catalytic activity and expand their applications in clinical diagnosis and biochemical sensing. Herein, a highly efficient dual-site peroxidase mimic composed of highly dispersed Pt and Mo atoms is reported. The obtained Mo-Pt/CeO2 exhibits exceptional peroxidase-like catalytic activity, with a Vmax as high as 34.16 × 10-8 m s-1, which is 37.5 times higher than that of the single-site counterpart. Mechanism studies suggest that the Mo atoms can not only serve as adsorption and activation sites for the H2O2 substrate but also regulate the charge density of Pt centers to promote the generation ability of •OH. As a result, the synergistic effect between the dual active sites significantly improves the catalytic efficiency. Significantly, the application of the Mo-Pt/CeO2 catalyst's excellent peroxidase-like activity is extended to various biochemical detection applications, including the trace detection of glucose and cysteine, as well as the assessment of antioxidants' antioxidant capacity. This work reveals the great potential of rational design dual-site active centers for constructing high-performance artificial nanozymes.

13.
Heliyon ; 10(15): e34801, 2024 Aug 15.
Artigo em Inglês | MEDLINE | ID: mdl-39170534

RESUMO

PANI/Fe-doped CeO 2 nanocomposite was synthesised by the in-situ process. The produced powders were characterised by XRD, XPS, FT-IR, Raman, HRTEM and SEM-EDS tests. The sensors' function was based on PANI/Fe-doped CeO 2 nanocomposite with thin film deposited on top of interdigitated electrodes (IDT). NH 3 detection with PANI/Fe-doped CeO 2 nanocomposite sensor could be successfully performed even at room temperature (RT) and relative humidity of 45 %. Results demonstrated that PANI/Fe-doped CeO 2 might be promising sensing materials for detecting the low NH 3 concentration (ppm). In addition, the sensor is selective to the interfering gases, including CO, CO 2 and NO 2 . This sensor displays acceptable repeatability and stability over time.

14.
Artigo em Inglês | MEDLINE | ID: mdl-39167683

RESUMO

Modification of CeO2 (ceria) with 3d transition metals, particularly iron, has been proven to significantly enhance its catalytic efficiency in oxidation or combustion reactions. Although this phenomenon is widely reported, the nature of the iron-ceria interaction responsible for this improvement remains debated. To address this issue, we prepared well-defined model FeOx/CeO2(111) catalytic systems and studied their structure and interfacial electronic properties using photoelectron spectroscopy, scanning tunneling microscopy, and low-energy electron diffraction, coupled with density functional theory (DFT) calculations. Our results show that under ultrahigh vacuum conditions, Fe deposition leads to the formation of small FeOx clusters on the ceria surface. Subsequent annealing results in the growth of large amorphous FeOx particles and a 2D FeOx layer. Annealing in an oxygen-rich atmosphere further oxidizes iron up to the Fe3+ state and improves the crystallinity of both the 2D layer and the 3D particles. Our DFT calculations indicate that the 2D FeOx layer interacts strongly with the ceria surface, exhibiting structural corrugations and transferred electrons between Fe2+/Fe3+ and Ce4+/Ce3+ redox pairs. The novel 2D FeOx/CeO2(111) phase may explain the enhancement of the catalytic properties of CeO2 by iron. Moreover, the corrugated 2D FeOx layer can serve as a template for the ordered nucleation of other catalytically active metals, in which the redox properties of the 2D FeOx/CeO2(111) system are exploited to modulate the charge of the supported metals.

15.
Chemistry ; : e202402516, 2024 Aug 21.
Artigo em Inglês | MEDLINE | ID: mdl-39168823

RESUMO

On the way to carbon neutrality, directly catalyzing atmospheric CO2 into high-value chemicals might be an effective approach to mitigate the negative impacts of rising airborne CO2 concentrations. Here, we pioneer the investigation of the influence of the H2/CO2 partial pressure ratio (PPR) on air-level CO2 methanation. Using Ni/CeO2 as a case catalyst, increasing H2/CO2 PPR significantly improves low-temperature CO2 conversion and high-temperature CH4 selectivity, i.e., from 10 of H2/CO2 PPR on, CO2 is completely methanized at 250 °C, and nearly 100% CH4 selectivity is achieved at 400 °C. 100-hour stability tests demonstrate the practical application potential of Ni/CeO2 at 250 °C and 400 °C. In-situ DRIFTS reveal that reinforced formate pathway by increasing H2/CO2 PPR is responsible for the high CH4 yield. In contrast, even though the CO pathway dominated CO2 conversion on Ni is enhanced by rising H2/CO2 PPR, but at a high reaction temperature, the promoted CO desorption still leads to lower CH4 selectivity. This work offers deep insights into the direct air-level CO2 resourceization, contributing to the achievement of airborne CO2 reductions.

16.
Nanotechnology ; 2024 Aug 22.
Artigo em Inglês | MEDLINE | ID: mdl-39173656

RESUMO

It is a challenge to improve the long-term durability of Pd-based electrocatalysts for oxygen reduction reaction (ORR) in fuel cells. Herein, Pd/CeO2-C-T (T=800, 900 and 1000℃) hybrid catalysts with metal-support interaction are prepared from Ce-based metal organic framework (Ce-MOF) precursor. Abundant tiny CeO2 nanoclusters are produced to form nanorod structures with uniformly distributed carbon through a calcination process. Meanwhile, both carbon and CeO2 nanoclusters have good contact with the following deposited surfactant-free Pd nanoclusters. Benefited from the large specific surface area, good conductivity and structure integrity, Pd/CeO2-C-900 exhibits the best electrocatalytic ORR performance: onset potential of 0.968 V and half-wave potential of 0.857 V, outperforming those obtained on Pd/C counterpart. In addition, the half-wave potential only shifts 7 mV after 6000 cycles of accelerated durability testing, demonstrating robust durability.

17.
Artigo em Inglês | MEDLINE | ID: mdl-39186185

RESUMO

The catalysts with three-dimensional porous (3DP) CeO2, LaFeO3 and SrTiO3 are synthesized by sol-gel method and chemical precipitation method. The resulting multi-component 3DP CeO2/LaFeO3/SrTiO3 composite material featured a high specific surface area (26.08 m2/g), which can provide more surface active sites to improve adsorption capacity and catalytic performance. The photocatalytic, Fenton-like, photo-Fenton-like performance of the catalyst are studied on decolorization of RhB under UV irradiation, respectively. 3DP CeO2/LaFeO3/SrTiO3 exhibits high catalytic performance. Compared with photocatalytic or Fenton-like performance, 3DP CeO2/LaFeO3/SrTiO3 catalyst exhibits higher photo-Fenton-like performance, facilitating efficient decolorization of the rhodamine B. Moreover, the initial reaction rate on decolorization of RhB with 3DP CeO2/LaFeO3/SrTiO3 is 10.55, 5.52, 3.67 and 1.51 times higher than that with SrTiO3, LaFeO3, 3DP CeO2 and 3DP CeO2/LaFeO3, respectively. Meanwhile, 3DP LaFeO3/CeO2/SrTiO3 has a wider pH usage range in the synergistic reaction. Finally, a catalytic mechanism for the decolorization of rhodamine B is proposed. The continuous cycling of Fe3+/Fe2+ and Ce4+/Ce3+ and the production of active substances are achieved under the photo-Fenton-like effect of the catalyst.

18.
Small ; : e2404142, 2024 Aug 15.
Artigo em Inglês | MEDLINE | ID: mdl-39148197

RESUMO

As of the present time, the in-depth study of the structure-activity relationship between electronic configuration and CO2 photoreduction performance is often overlooked. Herein, a series of Cux species modified CeO2 nanodots are constructed in situ by flame spray pyrolysis (FSP) to achieve an efficient photocatalytic CO2-to-C2 conversion with an electron utilization of up to 142.5 µmol g-1. Through an in-depth study of the electronic behavior and catalytic pathways, it is found that the Cu0/Cu+ species in the coexistence state of Cu0/Cu+/Cu2+ can optimize the energy band structure, photocurrent stability, and provide a kinetic basis for the active surface catalytic reaction process that requires the conversion of multiple electrons into C2 products, which ultimately enhances the CO2-to-C2H6 photoreduction by 3.8-fold and that for CO2-to-C2H4 photoreduction by 5.2-fold. Besides, the Cu2+ species in the coexistence state of Cu0/Cu+/Cu2+ are able to regulate the electronic behavior and the choice of the catalytic pathway, enabling the transitions between CO2-to-C2H6 and CO2-to-C2H4. This work indicates that electronic configuration optimization is an effective strategy to significantly enhance the CO2 photoreduction performance and provides new ideas for the design and synthesis of high-performance heterostructure photocatalysts.

19.
ChemSusChem ; : e202401295, 2024 Aug 16.
Artigo em Inglês | MEDLINE | ID: mdl-39148488

RESUMO

Solar thermochemical CO2 splitting using metal oxides is considered as a promising approach to produce solar fuels since it is capable to tap abundant sunlight directly and store solar energy in the renewable fuel. It remains a grand challenge to achieve highly efficient CO2 splitting at low temperature (<800 oC) due to insufficient activation of metal oxides for CO2.Herein, the introduction of a small amount of Pt was found to be able to greatly increase the performance of CO2 splitting with the highest peak CO production rate of about 65 mL min-1 g-1, CO productivity of about 53 mL g-1, nearly 100% CO2 conversion and long-term stability for 0.5Pt/CeO2 which exceeded most of the state-of-the-art transition metals-based oxides even at lower temperature (700 oC). This could be attributed to the addition of Pt leading to the formation of an interface (Pt0-Ov-Ce3+) after CH4 reduction, which improved CO2 activation and dissociation due to beneficial breakage of C=O bond by the cooperation of Pt0 and oxygen vacancies in the interface.

20.
ChemSusChem ; : e202400681, 2024 Jul 31.
Artigo em Inglês | MEDLINE | ID: mdl-39083347

RESUMO

Transition metal-doped ceria (M-CeO2) catalysts (M = Fe, Co, Ni and Cu) with multiple loadings were experimentally investigated for reverse water gas shift (RWGS) reaction. Density functional theory (DFT) calculations were performed to benchmark the properties that impact catalytic activity of CO2 reduction. Temperature-programmed desorption (TPD) was conducted to study the CO2 binding strength on doped CeO2 surfaces; the trend of the energy along increasing metal loading agrees with the DFT calculations. Notably, CO2 dissociative adsorption energy and oxygen vacancy (OV) formation energy are key descriptors obtained from both DFT and experiments, which can be used to evaluate catalytic performance. Results show the effectiveness of transition metal doping in enhancing CO2 adsorption and reducibility of the surfaces, with Fe showing particularly promising results, i.e., CO2 conversion higher than 56% at 600 °C and 100% selectivity to CO. Cu exhibits 100% selectivity to CO but low CO2 conversion, while Co and Ni showed notable ability of methanation, particularly at high loadings. This study finds that an effective CeO2 based RWGS catalyst corresponds to OV sites that have low OV formation energies for surface reduction, and moderate CO2 adsorption energies for strong interaction with the surface to promote C-O bond scission.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA