Sustained release of 5-aminosalicylic acid from azoreductase-responsive polymeric prodrugs for prolonged colon-targeted colitis therapy.

Ulcerative colitis (UC) is a challenging inflammatory gastrointestinal disorder, whose therapies encounter limitations in overcoming insufficient colonic retention and rapid systemic clearance. In this study, we report an innovative polymeric prodrug nanoformulation for targeted UC treatment through sustained 5-aminosalicylic acid (5-ASA) delivery. Amphiphilic polymer-based 13.5 nm micelles were engineered to incorporate azo-linked 5-ASA prodrug motifs, enabling cleavage via colonic azoreductases. In vitro, micelles exhibited excellent stability under gastric/intestinal conditions while demonstrating controlled 5-ASA release over 24 h in colonic fluids. Orally administered micelles revealed prolonged 24-h retention and a high accumulation within inflamed murine colonic tissue. At an approximately 60% dose reduction from those most advanced recent studies, the platform halted DSS colitis progression and outperformed standard 5-ASA therapy through a 77-97% suppression of inflammatory markers. Histological analysis confirmed intact colon morphology and restored barrier protein expression. This integrated prodrug nanoformulation addresses limitations in colon-targeted UC therapy through localized bioactivation and tailored pharmacokinetics, suggesting the potential of nanotechnology-guided precision delivery to transform disease management.

Targeting Inflammatory Lesions Facilitated by Galactosylation Modified Delivery System Eudragit/Gal-PLGA@Honokiol for the treatment of Ulcerative Colitis.

Honokiol (HNK) is one of the bioactive ingredients from the well-known Chinese herbal medicine Magnolia officinalis, and its research interests is rising for its extensive pharmacological activities, including novel therapeutic effect on ulcerative colitis (UC). However, further application of HNK is largely limited by its unique physicochemical properties, such as poor water solubility, low bioavailability, as well as unsatisfied targeting efficacy for inflammatory lesions. In this study, we constructed galactosylation modified PLGA nanoparticles delivery system for efficient target delivery of HNK to the colitic lesions, which could lay a research foundation for the deep development of HNK for the treatment of UC. D-galactose was grafted by chemical coupling reactions with PLGA to prepare Gal-PLGA, which was used as a carrier for HNK (Gal-PLGA@HNK nanoparticles (NPs)). To improve the colon targeting efficiency by oral administration of the NPs, Eudragit S100 was used for wrapping on the surface of Gal-PLGA@HNK NPs (E/Gal-PLGA@HNK NPs). Our results showed that the encapsulation efficiency and drug loading capacity of E/Gal-PLGA@HNK NPs were 90.72 ± 0.54% and 8.41 ± 0.02%, respectively. Its average particle size was 242.24 ± 8.42 nm, with a PDI value of 0.135 ± 0.06 and zeta-potential of -16.83 ± 1.89 mV. The release rate of HNK from E/Gal-PLGA@HNK NPs was significantly decreased when compared with that of free HNK in simulated gastric and intestinal fluids, which displayed a slow-releasing property. It was also found that the cellular uptake of E/Gal-PLGA@HNK NPs was significantly increased when compared with that of free HNK in RAW264.7 cells, which was facilitated by D-galactose grafting on the PLGA carrier. Additionally, our results showed that E/Gal-PLGA@HNK NPs significantly improved colonic atrophy, body weight loss, as well as reducing disease activity index (DAI) score and pro-inflammatory cytokine levels in UC mice induced by DSS. Besides, the retention time of E/Gal-PLGA@HNK NPs in the colon was significantly increased when compared with that of other preparations, suggesting that these NPs could prolong the interaction between HNK and the injured colon. Taken together, the efficiency for target delivery of HNK to the inflammatory lesions was significantly improved by galactosylation modification on the PLGA carrier, which provided great benefits for the alleviation of colonic inflammation and injury in mice.

Effects of polysaccharides on colonic targeting and colonic fermentation of ovalbumin-ferulic acid based emulsion.

Rutin is a polyphenol with beneficial pharmacological properties. However, its bioavailability is often compromised due to low solubility and poor stability. Encapsulation technologies, such as emulsion systems, have been proven to be promising delivery vehicles for enhancing the bioavailability of bioactive compounds. Thus, this study was proposed and designed to investigate the colonic targeting and colonic fermentation characteristics of rutin-loaded ovalbumin-ferulic acid-polysaccharide (OVA-FA-PS) complex emulsions. The results indicate that OVA-FA-PS emulsion effectively inhibits the degradation of rutin active substances and facilitates its transport of rutin to the colon. The analysis revealed that the OVA-FA-κ-carrageenan emulsion loaded with rutin exhibited superior elasticity and colon targeting properties compared to the OVA-FA-hyaluronic acid or OVA-FA-sodium alginate emulsions loaded with rutin in the composite emulsion. Additionally, it was observed that the rutin loaded within the OVA-FA-κ-carrageenan emulsion underwent degradation and was converted to 4-hydroxybenzoic acid during colonic fermentation.

ROS-responsive nano-medicine for navigating autophagy to enhance targeted therapy of inflammatory bowel disease.

Inflammatory bowel disease (IBD) is a chronic gastrointestinal disorder characterized by immune dysregulation and intestinal inflammation. Rapamycin (Ra), an mTORC1 pathway inhibitor, has shown promise for autophagy induction in IBD therapy but is associated with off-target effects and toxicity. To address these issues, we developed an oral liposome responsive to reactive oxygen species (ROS) using lipids and amphiphilic materials. We combined ketone thiol (TK) for ROS responsive and hyaluronic acid (HA) with high affinity for CD44 receptors to prepare rapamycin-loaded nanoparticle (Ra@TH). Owing to its ROS responsive characteristic, Ra@TH can achieve inflammatory colonic targeting. Additionally, Ra@TH can induce autophagy by inhibiting the mTORC1 pathway, leading to the clearance of damaged organelles, pathogenic microorganisms and oxidative stress products. Simultaneously, it also collaboratively inhibits the NF-κB pathway suppressed by the removal of ROS resulting from TK cleavage, thereby mediating the expression of inflammatory factors. Furthermore, Ra@TH enhances the expression of typical tight junction proteins, synergistically restoring intestinal barrier function. Our research not only expands the understanding of autophagy in IBD treatment but also introduces a promising therapeutic approach for IBD patients.

Can in vitro/in silico tools improve colonic concentration estimations for oral extended-release formulations? A case study with upadacitinib.

Upadacitinib, classified as a highly soluble drug, is commercially marketed as RINVOQ®, a modified-release formulation incorporating hydroxypropyl methylcellulose as a matrix system to target extended release throughout the gastrointestinal (GI) tract. Our study aimed to explore how drug release will occur throughout the GI tract using a plethora of in vitro and in silico tools. We built a Physiologically-Based Pharmacokinetic (PBPK) model in GastroPlus™ to predict the systemic concentrations of the drug when administered using in vitro dissolution profiles as input to drive luminal dissolution. A series of in vitro dissolution experiments were gathered using the USP Apparatus I, III and IV in presence of biorelevant media, simulating both fasted and fed state conditions. A key outcome from the current study was to establish an in vitro-in vivo correlation (IVIVC) between (i) the dissolution profiles obtained from the USP I, III and IV methods and (ii) the fraction absorbed of drug as deconvoluted from the plasma concentration-time profile of the drug. When linking the fraction dissolved as measured in the USP IV model, a Level A IVIVC was established. Moreover, when using the different dissolution profiles as input for PBPK modeling, it was also observed that predictions for plasma Cmax and AUC were most accurate for USP IV compared to the other models (based on predicted versus observed ratios). Furthermore, the PBPK model has the utility to extract the predicted concentrations at the level of the colon which can be of utmost interest when working with specific in vitro assays.

Dual-Stimuli-Responsive Gut Microbiota-Targeting Nitidine Chloride-CS/PT-NPs Improved Metabolic Status in NAFLD.

Background and Purpose: Nitidine chloride (NC) is a botanical drug renowned for its potent anti-inflammatory, antimalarial, and hepatocellular carcinoma-inhibiting properties; however, its limited solubility poses challenges to its development and application. To address this issue, we have devised a colon-targeted delivery system (NC-CS/PT-NPs) aimed at modulating the dysbiosis of the gut microbiota by augmenting the interaction between NC and the intestinal microbiota, thereby exerting an effect against nonalcoholic fatty liver disease. Methods: The NC-CS/PT-NPs were synthesized using the ion gel method. Subsequently, the particle size distribution, morphology, drug loading efficiency, and release behavior of the NC-CS/PT-NPs were characterized. Furthermore, the impact of NC-CS/PT-NPs on non-alcoholic fatty liver disease (NAFLD) induced by a high-fat diet (HFD) in mice was investigated through serum biochemical analysis, ELISA, and histochemical staining. Additionally, the influence of NC-CS/PT-NPs on intestinal microbiota was analyzed using 16S rDNA gene sequencing. Results: The nanoparticles prepared in this study have an average particle size of (255.9±5.10) nm, with an encapsulation rate of (72.83±2.13) % and a drug loading of (4.65±0.44) %. In vitro release experiments demonstrated that the cumulative release rate in the stomach and small intestine was lower than 22.0%, while it reached 66.75% in the colon. In vivo experiments conducted on HFD-induced NAFLD mice showed that treatment with NC-CS/PT-NPs inhibited weight gain, decreased serum aspartate aminotransferase (AST), Alanine aminotransferase (ALT) and lipid levels, improved liver and intestinal inflammation, and altered the diversity of gut microbiota in mice. Conclusion: This study provides new evidence for the treatment of NAFLD through the regulation of gut microbiota using active ingredients from traditional Chinese medicine.

Colon-targeted delivery of polyphenols: construction principles, targeting mechanisms and evaluation methods.

Polyphenols have received considerable attention for their promotive effects on colonic health. However, polyphenols are mostly sensitive to harsh gastrointestinal environments, thus, must be protected. It is necessary to design and develop a colon-targeted delivery system to improve the stability, colon-targeting and bioavailability of polyphenols. This paper mainly introduces research on colon-targeted controlled release of polyphenols. The physiological features affecting the dissolution, release and absorption of polyphenol-loaded delivery systems in the colon are first discussed. Simultaneously, the types of colon-targeted carriers with different release mechanisms are described, and colon-targeting assessment models that have been studied so far and their advantages and limitations are summarized. Based on the current research on polyphenols colon-targeting, outlook and reflections are proposed, with the goal of inspiring strategic development of new colon-targeted therapeutics to ensure that the polyphenols reach the colon with complete bioactivity.

Surface Engineering Methods for Powder Bed Printed Tablets to Optimize External Smoothness and Facilitate the Application of Different Coatings.

In a previous attempt to achieve ileo-colonic targeting of bovine intestinal alkaline phosphatase (BIAP), we applied a pH-dependent coating, the ColoPulse coating, directly on powder bed printed (PBP) tablets. However, the high surface roughness necessitated an additional sub-coating layer [Nguyen, K. T. T., Pharmaceutics 2022]. In this study, we aimed to find a production method for PBP tablets containing BIAP that allows the direct application of coating systems. Alterations of the printing parameters, binder content, and printing layer height, when combined, were demonstrated to create visually less rough PBP tablets. The addition of ethanol vapor treatment further improved the surface's smoothness significantly. These changes enabled the direct application of the ColoPulse, or enteric coating, without a sub-coating. In vitro release testing showed the desired ileo-colonic release or upper-intestinal release for ColoPulse or enteric-coated tablets, respectively. Tablets containing BIAP, encapsulated within an inulin glass, maintained a high enzymatic activity (over 95%) even after 2 months of storage at 2-8 °C. Importantly, the coating process did not affect the activity of BIAP. In this study, we demonstrate, for the first time, the successful production of PBP tablets with surfaces that are directly coatable with the ColoPulse coating while preserving the stability of the encapsulated biopharmaceutical, BIAP.

Form & formulation approaches for COntRollable Release in 3D printed Colonic Targeting (CORR3CT) budesonide tablet.

Inflammatory bowel disease (IBD) represents a group of chronic and debilitating inflammatory diseases affecting various parts of the gastrointestinal (GI) tract. The disease incidence and prevalence have been growing worldwide since the early 21st century and this upward trend is expected to continue. Due to a complex and variable clinical presentation across different patients, the efficacy of a one-size-fits-all commercial formulation for IBD remains limited. Here, we present the development of a novel adjustable and controllable release, 3D printed colonic targeting (CORR3CT) dosage form of budesonide, to reduce off-targeting adverse effects and to potentially replace the use of enemas, which are invasive and commonly associated with poor adherence. An in vitro Gastrointestinal Simulated System (GISS) model was employed in this study to examine the ability of the 3D printed tablets to deliver budesonide to various targeted sites along the gastrointestinal tract. CORR3CT tablet with Pill-in-pill configurations were designed, fabricated and the relationship between the 3D printed design and resultant dissolution profiles were established. The 3D printed tablets also exhibited excellent and comparable dose accuracy and quality versus commercial tablets, while enhancing the delivery of budesonide to the targeted colon region. Overall, this study has laid the foundational proof of concept demonstrating controllable targeting of oral therapeutics along the gastrointestinal tract using 3D printing technologies.

Formulation of a 3D Printed Biopharmaceutical: The Development of an Alkaline Phosphatase Containing Tablet with Ileo-Colonic Release Profile to Treat Ulcerative Colitis.

Powder bed printing is a 3D-printing process that creates freeform geometries from powders, with increasing traction for personalized medicine potential. Little is known about its applications for biopharmaceuticals. In this study, the production of tablets containing alkaline phosphatase using powder bed printing for the potential treatment of ulcerative colitis (UC) was investigated, as was the coating of these tablets to obtain ileo-colonic targeting. The printing process was studied, revealing line spacing as a critical factor affecting tablet physical properties when using hydroxypropyl cellulose as the binder. Increasing line spacing yielded tablets with higher porosity. The enzymatic activity of alkaline phosphatase (formulated in inulin glass) remained over 95% after 2 weeks of storage at 45 °C. The subsequent application of a colonic targeting coating required a PEG 1500 sub-coating. In vitro release experiments, using a gastrointestinal simulated system, indicated that the desired ileo-colonic release was achieved. Less than 8% of the methylene blue, a release marker, was released in the terminal ileum phase, followed by a fast release in the colon phase. No significant impact from the coating process on the enzymatic activity was found. These tablets are the first to achieve both biopharmaceutical incorporation in powder bed printed tablets and ileo-colonic targeting, thus might be suitable for on-demand patient-centric treatment of UC.

Formulation and In Vitro Evaluation of Pellets Containing Sulfasalazine and Caffeine to Verify Ileo-Colonic Drug Delivery.

The ColoPulse coating is a pH-dependent coating that can be used to target drug release to the ileo-colonic region. ColoPulse coated tablets and capsules have demonstrated their targeting capabilities in vivo in more than 100 volunteers and patients. However, so far the ColoPulse coating has not been used for multi-particulate pellet formulations. The sulfasalazine-caffeine method can be used to confirm ileo-colonic drug delivery in vivo. Caffeine serves as a release marker in this method, while sulfasalazine serves as a marker for colonic arrival. In this study, extrusion-spheronization was used to produce microcrystalline cellulose based pellets containing both caffeine and sulfasalazine. Dissolution tests revealed that a superdisintegrant, i.e., croscarmellose sodium or sodium starch glycolate, should be incorporated in the formulation to achieve acceptable release profiles for both sulfasalazine and caffeine. However, acceptable release profiles were only obtained when the pelletizing liquid consisted of ethanol/water 1/1 (v/v) but not with pure water. This phenomenon was ascribed to the differences in the degree of swelling of the superdisintegrant in the pelletizing liquid during the granulation process. The pellets were coated with the ColoPulse coating and showed the desired pH-dependent pulsatile release profile in vitro. In future clinical studies, ileo-colonic targeting should be verified.

Multiscale Shellac-Based Delivery Systems: From Macro- to Nanoscale.

Delivery systems play a crucial role in enhancing the activity of active substances; however, they require complex processing techniques and raw material design to achieve the desired properties. In this regard, raw materials that can be easily processed for different delivery systems are garnering attention. Among these raw materials, shellac, which is the only pharmaceutically used resin of animal origin, has been widely used in the development of various delivery systems owing to its pH responsiveness, biocompatibility, and degradability. Notably, shellac performs better on encapsulating hydrophobic active substances than other natural polymers, such as polysaccharides and proteins. In addition, specially designed shellac-based delivery systems can also be used for the codelivery of hydrophilic and hydrophobic active substances. Shellac is most widely used for oral administration, as shellac-based delivery systems can form a compact structure through hydrophobic interaction, protecting transported active substances from the harsh environment of the stomach to achieve targeted delivery in the small intestine or colon. In this review, the advantages of shellac in delivery systems are discussed in detail. Multiscale shellac-based delivery systems from the macroscale to nanoscale are comprehensively introduced, including matrix tablets, films, enteric coatings, hydrogels, microcapsules, microparticles (beads/spheres), nanoparticles, and nanofibers. Furthermore, the hotspots, deficiencies, and future perspectives of shellac-based delivery system development are also analyzed. We hoped this review will increase the understanding of shellac-based delivery systems and inspire their further development.

Colonic delivery of metronidazole-loaded capsules for local treatment of bacterial infections: A clinical pharmacoscintigraphy study.

Drug delivery to the colon offers great promise for local treatment of colonic diseases as it allows bypassing systemic absorption in the small intestine, thereby increasing luminal drug concentrations in the colon. The primary objective of this in vivo pharmaco-scintigraphy study was to assess the colon drug targeting accuracy of a metronidazole benzoate colonic drug delivery system intended for local treatment of Clostridioides difficile infections. Additionally, it was assessed if the concept of mucoadhesion would increase colonic residence time and promote higher drug bioavailability. Two different capsule formulations were designed and tested in healthy human subjects. Capsules contained either non-mucoadhesive (NM) or mucoadhesive (M) microgranules, both loaded with 100 mg metronidazole benzoate (antibiotic prodrug) and 5 mg samarium oxide (scintigraphy tracer). Filled capsules were coated with a colonic-targeting technology consisting of two functional layers, which allow for accelerated drug release mediated by the intestinal pH in combination with colonic bacteria. Coated capsules were neutron-activated to yield the radioisotope 153Sm prior to administration to 18 healthy subjects. Gamma-scintigraphy imaging was combined with the measurement of drug plasma levels. Formulation NM showed high colon-targeting accuracy. Initial capsule disintegration within the targeted ileocolonic region was observed in 8 out of 9 subjects (89%) with colonic arrival times in the range of 3.5-12 h and reduced systemic exposure. In contrast, the mucoadhesive formulation M showed some inconsistency regarding the site of initial capsule disintegration (targeting accuracy 56%). Variability of drug release was attributed to self-adhesion and agglomeration of the mucoadhesive microparticles within the capsule. Accurate ileocolonic delivery of metronidazole-loaded microgranules was achieved following oral administration of colonic-targeted capsules. Delayed drug release from NM microparticles in the colon leads to a reduced systemic exposure compared to immediate-release data from literature and presumably elevated drug concentrations in the colonic lumen. This approach offers promising options for the local treatment of colonic diseases.

A dual pH and microbiota-triggered coating (Phloral™) for fail-safe colonic drug release.

Enteric-coated dosage forms are widely used for targeting the ileo-colonic region of the gastrointestinal (GI) tract. However, accurate targeting is challenging due to intra- and inter-individual variability in intestinal paramaters such as fluid pH and transit times, which occasionally lead to enteric coating failure. As such, a unique coating technology (Phloral™), which combines two independent release mechanisms - a pH trigger (Eudragit® S; dissolving at pH 7) and a microbiota-trigger (resistant starch), has been developed, offering a fail-safe approach to colonic targeting. Here, we demonstrate that the inclusion of resistant starch in the coating does not affect the pH mediated drug release mechanism or the robustness of the coating in the upper GI tract. In order to make the resistant starch more digestible by bacterial enzymes, heat treatment of the starch in the presence of butanol was required to allow disruption of the crystalline structure of the starch granules. Under challenging conditions of limited exposure to high pH in the distal small intestine fluid and rapid transit through the colon, often observed in patients with inflammatory bowel disease, particularly in ulcerative colitis, this dual-trigger pH-enzymatic coating offers a revolutionary approach for site specific drug delivery to the large intestine.

Diclofenac-ß-cyclodextrin for colonic drug targeting: In vivo performance in rats.

The aim of this in vivo study was to assess the ability of the prodrug conjugate diclofenac-ß-cyclodextrin to release diclofenac in the colon following oral administration, using sulfapyridine (a metabolite of sulfasalazine) as a marker of colonic absorption. Two groups of rats were used; the test rats received a suspension containing the two prodrugs, diclofenac-ß-cyclodextrin and sulfasalazine, while the control rats received a suspension containing the corresponding free drugs, sodium diclofenac and sulfapyridine. The rats were fasted overnight with free access to water before and throughout the first 12h of the study. Blood was collected from the tail vein at pre-determined time points and the plasma analyzed for the concentrations of diclofenac and sulfapyridine. Following the oral administration of the two prodrugs, a more extended absorption profile was observed and Cmax was achieved 10h post-dose, in contrast to rapid absorption of the free drugs (tmax of diclofenac being 1.3h, and that of sulfapyridine being 2.1h). In addition to a later tmax, conjugation of diclofenac to ß-cyclodextrin also resulted in a reduced Cmax and a reduced AUC. The same tmax for diclofenac-ß-cyclodextrin as for sulfasalazine confirms the colonic metabolism of diclofenac-ß-cyclodextrin. This study shows the potential of this new cyclodextrin-based prodrug to target and release diclofenac specifically in the colon following oral administration.

Enhanced colonic delivery of ciclosporin A self-emulsifying drug delivery system encapsulated in coated minispheres.

OBJECTIVES: Investigate the potential of coated minispheres (SmPill®) to enhance localized Ciclosporin A (CsA) delivery to the colon. METHODS: CsA self-emulsifying drug delivery systems (SEDDS) were encapsulated into SmPill® minispheres. Varying degrees of coating thickness (low, medium and high) were applied using ethylcellulose and pectin (E:P) polymers. In vitro CsA release was evaluated in simulated gastric and intestinal media. Bioavailability of CsA in vivo following oral administration to pigs of SmPill® minispheres was compared to Neoral® po and Sandimmun® iv in a pig model. CsA concentrations in blood and intestinal tissue were determined by HPLC-UV. RESULTS: In vitro CsA release from coated minispheres decreased with increasing coating thickness. A linear relationship was observed between in vitro CsA release and in vivo bioavailability (r(2) = 0.98). CsA concentrations in the proximal, transverse and distal colon were significantly higher following administration of SmPill®, compared to Neoral® po and Sandimmun® iv (p < 0.05). Analysis of transverse colon tissue subsections also revealed significantly higher CsA concentrations in the mucosa and submucosa using SmPill® minispheres (p < 0.05). CONCLUSIONS: Modulating E:P coating thickness controls release of CsA from SmPill® minispheres. Coated minispheres limited CsA release in the small intestine and enhanced delivery and uptake in the colon. These findings demonstrate clinical advantages of an oral coated minisphere-enabled CsA formulation in the treatment of inflammatory conditions of the large intestine.

Influence of feeding regimens on rat gut fluids and colonic metabolism of diclofenac-ß-cyclodextrin.

Feeding states may affect the performance of colonic prodrugs. The aim is to investigate the influence of feeding regimen in Wistar rats on: (i) distribution and pH contents along the gut and (ii) metabolism of two colonic prodrugs, diclofenac-ß-cyclodextrin and a commercially available control, sulfasalazine, within the caecal and colonic contents. Male Wistar rats were subject to four different feeding regimens, the gut contents characterized (mass and pH) and the metabolism of prodrugs investigated. The feeding regimen affects gut contents (mass and pH), more specifically in the stomach and lower intestine, and affects the rate of metabolism of diclofenac-ß-cyclodextrin, but not that of sulfasalazine. The latter's degradation is much faster than that of diclofenac-ß-cyclodextrin while the metabolism of both prodrugs is faster in colonic (versus caecal) contents. Fasting results in most rapid degradation of diclofenac-ß-cyclodextrin, possibly due to lack of competition (absence of food) for microbial enzymatic activity.

[Preparation of citrulline microspheres by spray drying technique for colonic targeting]. / Préparation des microsphères de citrulline à ciblage colique par la technique de spray drying.

INTRODUCTION: Citrulline is an amino acid that becomes essential in situations of intestinal insufficiency such as short bowel syndrome. It is therefore interesting to provide the patients with dosage forms for routing citrulline to the colon. The aim of this work is to formulate microspheres of citrulline for colonic targeting by the technique of spray drying. MATERIAL AND METHODS: Eudragit(®) FS 30D was selected as polymer to encapsulate citrulline using the spray drying technique. Citrulline and Eudragit(®) FS 30D were dissolved in water and ethanol, respectively. The aqueous and the ethanolic solutions were then mixed in 1:2 (v/v) ratio. Microspheres were obtained by nebulizing the citrulline-Eudragit(®) FS 30D solution using a Mini spray dryer equipped with a 0.7mm nozzle. The microspheres have been formulated using citrulline and Eudragit(®) FS 30D. The size distribution of microspheres was determined by light diffraction. The morphology of the microspheres was studied by electron microscopy. Manufacturing yields, encapsulation rate and dissolution profiles were also studied. RESULTS AND DISCUSSION: The microspheres obtained had a spherical shape with a smooth surface and a homogeneous size except for the microspheres containing the highest concentration of polymer (90 %). The formulation showed that the size and morphology of the microspheres are influenced by the polymer concentration. Manufacturing yields were about 51 % but encapsulation rate were always very high (above 90 %). The in vitro dissolution study showed that the use of the Eudragit(®) FS 30D under these conditions is not appropriate to change the dissolution profile of the citrulline. CONCLUSION: This technique has led to the formulation of microspheres with good physical properties in terms of morphology and size. The compression of the microspheres should help to control citrulline release for colonic targeting.