Effect of conventional cigarette smoking and recent heated tobacco products on CAD/CAM restorative materials.

OBJECTIVE: To determine the effects of conventional cigarette smoking (CS) and recent heated tobacco products (HTPs) on the surface roughness and color stability of different indirect restorative materials. MATERIALS AND METHODS: One hundred disc-shaped samples were constructed of three different restorative CAD/CAM materials: lithium disilicate glass-ceramic (IPS e.max CAD; Ivoclar Vivadent, Liechtenstein), zirconia (BruxZir® Zirconia, Glidewell, USA) and polyetheretherketone (BioHPP® bredent GmbH, Germany). Of the IPS e.max CAD and the Bruxzir samples, 20 samples were glazed, and 20 samples were polished, while the BioHPP samples were all polished according to the manufacturer's instructions. Fifty samples were subjected to conventional cigarette smoking (LM, Philip Morris International Inc., Egypt) (Groups: IPS e.max CAD_Glazed exposed to CS (LD_G_Cig), IPS e.max CAD_Polished exposed to CS (LD_P_Cig), Bruxzir_Glazed exposed to CS (Zr_G_Cig), Bruxzir _Polished exposed to CS (Zr_P_Cig) and BioHPP exposed to CS (PEEK_Cig) and fifty samples were exposed to heated tobacco product smoking (Heets, Russet selection, Philip Morris International Inc., Italy) (Groups: IPS e.max CAD_Glazed exposed to HTP (LD_G_HTP), IPS e.max CAD_Polished exposed to HTP (LD_P_HTP), Bruxzir_Glazed exposed to HTP (Zr_G_HTP), Bruxzir CAD_Polished exposed to HTP (Zr_P_HTP) and BioHPP exposed to HTP (PEEK_HTP).. Six hundred cigarettes/heets representing 30 days of medium smoking behavior (20 cigarettes/day) were used. Before and after exposure to smoke, the surface roughness of all the samples was measured using JITAI8101 surface roughness tester (Beijing Jitai Tech Detection Device Co., Ltd, China, and the color parameters were assessed using VITA Easyshade Advance 4.01 (VITA shade, VITA made, VITA). The data were analyzed using One-way ANOVA, paired sample t-test and independent sample t-test. The significance level was set at α < 0.05. The surface topography was evaluated by scanning electron microscopy (SEM) and analyzed using energy-dispersive X-ray (EDX) spectroscopy to determine changes in the surface chemical composition. RESULTS: Both types of smoking caused significant increases in the surface roughness of all the samples. There was a significant difference in color change between CS and HTP for all materials with different surface finish (P < 0.01) and zirconia had the greatest effect on color change (P < 0.001). In contrast, polyetheretherketone (PEEK) "BioHPP" had the least effect (P < 0.001). CONCLUSION: Exposure to different types of smoking induce changes in the surface topography and color of different esthetic restorative materials. Compared with HTP, conventional cigarette smoke has a greater effect on the surface roughness and color stability of esthetic restorative materials. The glazed surfaces showed less change in surface topography than did the polished surfaces. Zirconia showed better color stability when compared to polyetheretherketone (PEEK).

A review on improving the sensitivity and color stability of naturally sourced pH-sensitive indicator films.

Naturally sourced pH-sensitive indicator films are of interest for real-time monitoring of food freshness through color changes because of their safety. Therefore, natural pigments for indicator films are required. However, pigment stability is affected by environmental factors, which can in turn affect the sensitivity and color stability of the pH-sensitive indicator film. First, natural pigments (anthocyanin, betalain, curcumin, alizarin, and shikonin) commonly used in pH-sensitive indicator films are presented. Subsequently, the mechanisms behind the change in pigment color under different pH environments and their applications in monitoring food freshness are also described. Third, influence factors, such as the sources, types, and pH sensitivity of pigments, as well as environmental parameters (light, temperature, humidity, and oxygen) of sensitivity and color stability, are analyzed. Finally, methods for improving the pH-sensitive indicator film are explored, encapsulation of natural pigments, incorporation of a hydrophobic film-forming matrix or function material, and protective layer have been shown to enhance the color stability of indicator films, the addition of copigments or mental ions, blending of different natural pigments, and the utilization of electrospinning have been proved to increase the color sensitivity of indicator films. This review could provide theoretical support for the development of naturally sourced pH-sensitive indicator films with high stability and sensitivity and facilitate the development in the field of monitoring food freshness.

Determination of the Color Change of Various Esthetic Monolithic Monochromatic Computer-Aided Design/Computer-Aided Manufacturing Materials.

Dental technology has developed materials for prosthetics that are very similar to natural teeth and offer a good balance between durability and esthetics; however, some of these materials are not very color-stable under the influence of external factors. Therefore, the aim of this study is to determine and compare the color change (∆E00) of different esthetic monolithic monochromatic CAD/CAM materials after they have been thermocycled and treated with staining solutions. The color parameters were determined using a spectrophotometer on a white and black background. Five CAD/CAM materials were used for this study-CAD/CAM nanoceramic (GC Cerasmart270), CAD/CAM lithium disilicate ceramic (IPS e.max CAD), CAD/CAM polymer (Telio CAD), CAD/CAM composite (Tetric CAD) and CAD/CAM polymer-infiltrated ceramic (Vita Enamic). The test specimens produced were divided into groups and were thermocycled in distilled water. They were then stored for four weeks at 37 °C in either distilled water as a control liquid, black tea, instant coffee or red wine. The aim is also to evaluate the color changes as a function of the exposure time of the staining solutions. The results obtained were analyzed statistically. All CAD/CAM materials tend to discolor to varying degrees. Among the factors contributing to discoloration, red wine proved to be the most significant influencing factor. The conclusion from the results is that the color change is influenced by the type of material, the staining solution, the sample thickness, the color background and the aging time.

Influence of in-office whitening on the color matching and surface characteristics of single-shade resin composites.

OBJECTIVE: The color matching of single-shade resin composites after in-office whitening was investigated. MATERIALS AND METHODS: Four single-shade resin composites were used. A total of 35% hydrogen peroxide was used as the whitening agent. The resin composite was placed in a cavity of an artificially discolored bovine tooth. The color differences between the restoration and surrounding enamel before and after whitening were determined based on ΔE*ab, ΔE00, and ΔWID. The color stability, surface roughness (Sa), and surface gloss (GU) of the resin composite alone were also evaluated. Statistical analyses were performed using repeated-measures analysis of variance with the Tukey-Kramer test. RESULTS: Based on the 50:50% of perceptibility and acceptability thresholds of ΔE*ab and ΔE00, none of the resin composite restorations were clinically acceptable before or after whitening. Regarding ΔWID, although all resin composites showed "acceptable match" in the baseline, they showed "mismatch" after the third session of whitening. Most of the resin composites alone were stable in color against whitening. CONCLUSIONS: Although the single-shade resin composites failed to achieve the expected color matching on discolored teeth either before or after the whitening, the impact of the whitening on the color of the resin composite alone may be negligible.

Effect of Polishing Systems on the Surface Roughness and Color Stability of Aged and Stained Bulk-Fill Resin Composites.

The aim of this study is to investigate how two different polishing techniques affect the color stability, surface roughness, and changes in surface morphology of aged and coffee-stained bulk-fill resin composites. A total of 112 disc-shaped samples were prepared using Omnichroma Flow Bulk (OB), Charisma Bulk Flow One (CB), Estelite Bulk Fill Flow (EB), and Estelite Sigma Quick (control). Samples were divided into two subgroups (n = 16) and aged using thermocycling. A profilometer was used to measure the surface roughness (Ra) and a spectrophotometer was used for color stability (ΔE00). The EB group had the highest Ra values both before aging (disc: 0.23 ± 0.05, twist: 0.42 ± 0.05) and after aging (discs: 0.28 ± 0.04, twist: 0.46 ± 0.05). The OB group had the highest ΔE00 values before and after aging (discs: 3.06 ± 0.54, twist 3.05 ± 0.41) and the highest after coffee-staining (discs: 3.75 ± 0.70, twist: 3.91 ± 0.57). Re-polishing reduced the ΔE00 values in all materials but did not restore all to clinically acceptable levels. According to the results of this study, it can be concluded that the surface roughness and color stability of resin composites are notably influenced by the polishing technique, aging process, and coffee staining. Specimens that were polished using the multi-stage Super-Snap discs consistently exhibited smoother surfaces across all bulk-fill resin composites compared to those polished with the two-stage Diacomp plus Twist.

Comparative Evaluation of Mechanical Properties and Color Stability of Dental Resin Composites for Chairside Provisional Restorations.

Resin composites have become the preferred choice for chairside provisional dental restorations. However, these materials may undergo discoloration, changes in surface roughness, and mechanical properties with aging in the oral cavity, compromising the aesthetics, functionality, and success of dental restorations. To investigate the color and mechanical stability of chairside provisional composite resins, this study evaluated the optical, surface, and mechanical properties of four temporary restoration resin materials before and after aging, stimulated by thermal cycling in double-distilled water. Measurements, including CIE LAB color analysis, three-point bending test, nanoindentation, scanning electron microscopy (SEM), and atomic force microscopy (AFM), were conducted (n = 15). Results showed significant differences among the materials in terms of optical, surface, and mechanical properties. Revotek LC (urethane dimethacrylate) demonstrated excellent color stability (ΔE00 = 0.53-Black/0.32-White), while Artificial Teeth Resin (polymethyl methacrylate) exhibited increased mechanical strength with aging (p < 0.05, FS = 68.40 MPa-non aging/87.21 MPa-aging). Structur 2 SC (Bis-acrylic) and Luxatemp automix plus (methyl methacrylate bis-acrylate) demonstrated moderate stability in optical and mechanical properties (Structur 2 SC: ΔE00 = 1.97-Black/1.38-White FS = 63.20 MPa-non aging/50.07 MPa-aging) (Luxatemp automix plus: ΔE00 = 2.49-Black/1.77-White FS = 87.72 MPa-non aging/83.93 MPa-aging). These results provide important practical guidance for clinical practitioners, as well as significant theoretical and experimental bases for the selection of restorative composite resins.

The effect of whitening toothpastes on the color stability and surface roughness of stained resin composite.

BACKGROUND: This study aimed to investigate the effect of whitening toothpastes on the color stability and surface roughness of resin composites stained with coffee and cigarette smoke. METHODS: Seventy-two disk-shaped specimens (6 × 2 mm) of suprananohybrid resin composite were randomly divided into two groups and exposed to coffee and cigarette smoke (n = 36). After staining, the samples randomly divided into four groups according to whitening toothpastes and were brushed for 4 min: Opalescence Whitening (OW); Colgate Optic White (COW); Curaprox Black is White (CPX) and, distilled water (control) (n = 9). Color was measured with spectrophotometer at the initial, after staining, and after brushing, and surface roughness was measured with profilometer at the initial and after brushing. A surface morphology analysis was examined using scanning electron microscopy and atomic force microscopy. The obtained data were statistically analyzed. (p < 0.05). RESULTS: Cigarette smoke caused a significantly higher color change than coffee in the resin composite (p < 0.05). Brushing with hydrogen peroxide and silica-containing whitening toothpaste showed significant differences in color change (p < 0.05). The lowest whitening effect was found in activated charcoal-containing toothpaste. While all toothpastes increased the degree of surface roughness of resin composites, the highest roughness was caused by whitening toothpastes containing activated charcoal. (p < 0.05). CONCLUSIONS: The color stability and surface properties of resin composites can be affected by brushing them with whitening toothpaste. The utilization of whitening toothpaste containing hydrogen peroxide can be considered a safe method for increasing the whiteness of discolored resin composites.

Effect of multiple firings on optical and mechanical properties of Virgilite-containing lithium disilicate glass-ceramic of varying thickness.

OBJECTIVES: To investigate the effect of multiple firings on color, translucency, and biaxial flexure strength of Virgilite-containing (Li0.5Al0.5Si2.5O6) lithium disilicate glass ceramics of varying thickness. MATERIALS AND METHODS: Sixty discs were prepared from Virgilite-containing lithium disilicate blocks. Discs were divided according to thickness (n = 30) into T0.5 (0.5 mm) and T1.0 (1.0 mm). Each thickness was divided according to the number of firing cycles (n = 10); F1 (Control group): 1 firing cycle; F3: 3 firing cycles, and F5: 5 firing cycles. The discs were tested for color change (ΔE00) and translucency (TP00) using a spectrophotometer. Then, all samples were subjected to biaxial flexure strength testing using a universal testing machine. Data were collected and statistically analyzed (α = 0.5). For chemical analysis, six additional T0.5 discs (2 for each firing cycle) were prepared; for each firing cycle one disc was subjected to X-ray diffraction analysis (XRD) and another disc was subjected to Energy dispersive X-ray spectroscopy (EDX) and Scanning electron microscope (SEM). RESULTS: Repeated firing significantly reduced the translucency of F3 and F5 compared to F1 in T0.5 (p < 0.001), while for T1.0 only F5 showed a significant decrease in TP00 (p < 0.001). For ΔE00, a significant increase was recorded with repeated firings (p < 0.05) while a significant decrease resulted in the biaxial flexure strength regardless of thickness. CONCLUSIONS: Repeated firings had a negative effect on both the optical and mechanical properties of the Virgilite-containing lithium disilicate glass ceramics. CLINICAL RELEVANCE: Repeated firings should be avoided with Virgilite-containing lithium disilicate ceramics to decrease fracture liability and preserve restoration esthetics.

Effect of Dietary Simulating Solvents on the CAD-CAM Provisional Restorative Materials' Microhardness and Color Stability Properties: An in vitro Study.

Purpose: This in vitro study investigated the effects of dietary solvents on the microhardness and color stability of CAD/CAM provisional restorations compared to conventional materials. Methods: Disc-shaped specimens (n=200) were fabricated from self-cured acrylic resin, two 3D-printing resins (FormLabs, NextDent), and a milled material (TelioCAD). Randomization assigned specimens (n=10/group) to immersion solutions: artificial saliva, citric acid, heptane, coffee, and tea. Microhardness and color stability were evaluated. One-way and three-way ANOVA with Tukey's post hoc test analyzed the data. Results: Dietary solvents significantly reduced the surface microhardness of all tested materials (p<0.05). Unpolished surfaces exhibited greater color changes compared to polished ones (p<0.05) across all materials. Coffee and tea induced the most substantial reductions in hardness and the most significant color alterations (p<0.05), whereas saliva and citric acid had minimal effects. Conclusion: Milled provisional restorations exhibited superior hardness and color stability. Dietary solvents significantly affected material properties over time, highlighting the importance of material selection for clinical applications.

Performance of low shrinkage Bis-EFMA based bulk-fill dental resin composites.

OBJECTIVES: The purpose of this study was evaluating the performance of new Bis-EFMA based bulk-fill composites with common methacrylate based composites and commercial dental composites. METHODS: The Bis-EFMA monomer was synthesized and the novel Bis-EFMA based bulk-fill composites were prepared. The resin composite samples were co-cultured with human gingival epithelial cells and human dental pulp stem cells to test the biocompatibility. The edge adaptation was observed under a combination of stereoscope and scanning electron microscope. The internal hardness was measured using a Vickers microhardness tester after one-time filling of cavities prepared in extracted teeth. After friction and wear test on the surface of the resin composites, the surface morphology and volume wear of each group were measured by the optical profilometer. The color stability was measured by a colorimeter. RESULTS: Direct contact with human gingival epithelial cells and human dental pulp stem cells did not cause significant changes in their growth density and morphology, indicating good biocompatibility of Bis-EFMA group (p > 0.05). The continuous margin proportion of the Bis-EFMA group was as good as commercial bulk-fill composites (p > 0.05). The sectional microhardness results showed that the Bis-EFMA group had the highest microhardness. After the friction and wear test, the volume wear of the Bis-EFMA group was minimal, indicating its good wear resistance and mechanical strength. Color changes in all resin groups after 28 days of immersion were within the clinically acceptable range. SIGNIFICANCE: The addition of Bis-EFMA demonstrated excellent biocompatibility, edge adaptation and color stability comparable to commonly used clinical bulk-fill composites, along with preferable mechanical strength, friction and wear resistance. Bis-EFMA based bulk-fill composites have the potential to be employed as a bulk filling material in commercial dental composite applications.

Chitosan/Polyvinyl Alcohol-Based Biofilms Using Ternary Deep Eutectic Solvents towards Innovative Color-Stabilizing Systems for Anthocyanins.

Anthocyanins are amazing plant-derived colorants with highly valuable properties; however, their chemical and color instability issues limit their wide application in different food industry-related products such as active and intelligent packaging. In a previous study, it was demonstrated that anthocyanins could be stabilized into green plasticizers namely deep eutectic solvents (DESs). In this work, the fabrication of edible films by integrating anthocyanins along with DESs into biocompatible chitosan (CHT)-based formulations enriched with polyvinyl alcohol (PVA) and PVA nanoparticles was investigated. CHT/PVA-DES films' physical properties were characterized by scanning electron microscopy, water vapor permeability, swelling index, moisture sorption isotherm, and thermogravimetry analysis. Innovative red-to-blue formulation films were achieved for CHT/PVA nanoparticles (for 5 min of sonication) at a molar ratio 1:1, and with 10% of ternary DES (TDES)-containing malvidin-3-glucoside (0.1%) where the physical properties of films were enhanced. After immersion in solutions at different pH values, films submitted to pHs 5-8 were revealed to be more color stable and resistant with time than at acidic pH values.

Effect of Child Health Drinks on Color Stability of Various Aesthetic Restorative Materials - An In Vitro Study.

Introduction: In pediatric dentistry, the esthetically pleasing materials have tremendously changed the concept of restorative practice. Aim and Objectives: 1. The aim of the study is to evaluate the effect of child health drinks on color stability of various esthetic restorative materials via spectrophotometric analysis and to identify the esthetic restorative material that is color-stable against child health drinks. Materials and Methods: A total of 120 disk-shaped specimens with a diameter of 12 mm and a thickness of 2 mm were made from a composite (Dyract), giomer (Shofu), and composite (GC). Each group of 40 specimens of each material was divided into four sub-groups. Each sub-group was stored in different solutions, distilled water, Bournvita, Horlicks, and Pediasure, for 60 days. The color change measurement was done using a spectrophotometer both before and after staining. Result: One-way analysis of variance depicted that when the ΔE values of the restorative material were tested against each of the child health drink, there was a statistically significant difference between all child health drinks (P < 0.00001). When restorative materials were compared with the staining agent on 60 days duration, except Pediasure and Control, others (i.e. Horlicks and Bournvita) showed a statistically high significance (P < 0.05). Conclusion: Bournvita caused the highest color changes in 60 days time interval, followed by Horlicks and Pediasure. When the discoloration of several materials is studied, the highest level of discoloration was observed in the compomer, followed by the giomer, and the lowest level in the composite.

Color stability of precolored and extrinsically colored monolithic multilayered polychromatic zirconia: Effects of surface finishing and aging.

PURPOSE: To explore the impact of zirconia types, coloring methods, and surface finishing on the color stability of monolithic multilayered polychromatic zirconia after artificial aging, including thermocycling and simulated toothbrushing. MATERIALS AND METHODS: Eighty square-shaped zirconia samples were divided into 2 types (M3Y-TZP and M6Y-PSZ), further categorized based on coloring methods (precolored and extrinsically colored) and surface finishing techniques (mechanical polishing or glazing). The color stability was assessed using the CIEDE2000 formula. Artificial aging was simulated via thermocycling and toothbrushing. All samples were analyzed with a spectrophotometer to determine the post-aging color changes (ΔE00). The ΔE00 were interpreted and classified using the 50:50% perceptibility threshold (PT) and the 50:50% acceptability threshold (AT). Comparisons between groups for ΔE00 differences were performed using three-way ANOVA, with pairwise comparisons facilitated by Fisher's protected least significant difference test, α = 0.05. RESULTS: The study results indicated significant impacts of zirconia type, coloring method, and surface finishing on color stability. The M6Y groups experienced significantly greater color changes (6.61 ± 1.63) compared to the M3Y groups (3.40 ± 2.24), p < 0.0001. For both types of zirconia, extrinsically colored samples exhibited significantly higher ΔE00 when mechanically polished (p = 0.004). However, surface finishing had no significant effect on ΔE00 in precolored samples of either zirconia material (p = 1.000). The evaluation and categorization of ΔE00 variations indicated that nearly all color changes in the M6Y groups, regardless of being precolored, extrinsically colored, polished, or glazed, were deemed extremely unacceptable (Grade 1). In contrast, the M3Y groups showed more acceptable results, with the majority of color changes classified as moderately unacceptable (Grade 3). CONCLUSIONS: The color stability of multilayered polychromatic zirconia is influenced by the type of material, extrinsic coloring, and the chosen surface treatment post-artificial aging. The translucent 6Y-PSZ exhibited lower color stability, especially with only mechanical polishing. For the fabrication of M3Y-TZP and 6Y-PSZ monolithic multilayered polychromatic zirconia restorations, extrinsic coloring should be paired with glazing to maintain color stability. Conversely, in the absence of extrinsic coloring, both glazing and mechanical polishing are effective in preserving color stability.

Formation of chlorophyll-anionic polysaccharide complex coacervates to improve chlorophyll color stability: Thermodynamic and kinetic stability studies.

Chlorophyll (Chl) is the predominant pigment in green plants that can act as a food color and possesses various functional activities. However, its instability and rapid degradation on heating compromise the sensory qualities of its products. This study aimed to enhance the heat resistance of Chl by forming complex coacervates with two negatively charged polysaccharides, sodium alginate (SA) and K-carrageenan (KC). Dynamic light scattering and scanning electron microscopy analyses confirmed the formation of coacervates between Chl and the polysaccharides, whereas Fourier-transform infrared spectroscopy revealed that hydrogen bonding and electrostatic attraction were the primary forces behind complex formation. Electron spin resonance and thermodynamic studies further revealed that these complexes bolstered the thermal stability of Chl, with a maximum improvement of 70.38 % in t1/2 and a reduction of 50.72 % in the degradation rate constant. In addition, the antioxidant capacity of Chl was enhanced up to 35 %. Therefore, this study offers a novel approach to Chl preservation and suggests a viable alternative to artificial pigments in food products.

Impact of smoking on resin bonded restorations: A narrative review.

INTRODUCTION: Smoking is a common risk factor for multiple diseases, including diabetes mellitus, cardiovascular diseases, pulmonary diseases, and different cancers. It is an established cause of multiple oral health conditions, in addition to adversely impairing the appearance of oral tissues. Smoking has also been identified to impact dental restorations' functional and esthetic aspects. This narrative review is focused on the significance of the esthetic consequences of smoking on resin-based dental restoration. It provides an understanding of the challenges dental professionals and patients face. METHODS: A literature search was conducted to identify studies on the impact of smoking exposure on the esthetic appearance of composite restorations. The inclusion criteria were met by five studies selected for analysis. RESULTS: The studies revealed that conventional cigarettes cause more noticeable color changes than electronic cigarettes. Additionally, the choice of composite material significantly influences the color stability of dental restorations. Exposure to both smoking and staining agents could worsen the color alterations in dental restorations. Smokers may benefit from dental ceramics, which offer better aesthetics. Quantitative insights into these effects can be gained by incorporating delta E (ΔE) values and fluorescence intensity in esthetic evaluations. CONCLUSIONS: The studies provide valuable insights into the multiple factors that can impact the aesthetics of dental restorations. Dental professionals should take into account the smoking type, composite material, and patient habits when planning treatments. Utilizing ΔE values and fluorescence intensity in esthetic evaluations can provide a more comprehensive understanding. Future research should focus on longitudinal studies, alternative materials, and individual patient profiles.

Color Stability of Bioactive Restorative Material vs Nanohybrid Resin Composite: An In Vitro Study.

AIM: This study aimed to assess the color stability of bioactive restorative materials vs nanohybrid resin composites after 3 months of immersion in three frequently consumed beverages. MATERIALS AND METHODS: Thirty disk-shaped specimens of Giomer dental restorative material (Shofu, Japan) and nanohybrid resin composite (Tokuyama, Japan) were performed using a Teflon mold. Super-Snap system (Shofu, Japan) was utilized to finish and polish the specimens to be preserved for 24 hours in distilled water at 37°C. The samples had been divided into three subgroups (Coffee, tea, Pepsi) (n = 5). The initially displayed color measurements of the samples were performed using a spectrophotometer (VITA Easyshade® V). After 7 days, 30 days, and 90 days, color measurements were repeated, and the E of each sample was estimated. E of each sample was calculated. RESULTS: The Giomer group showed statistically significant higher E values than the nanohybrid resin composite where the p-value was ≤0.0001. Tea subgroup showed the highest statistically significant E values in both groups where the p-value was ≤ 0.0001. The highest statistically significant color change was recorded at 3 months. CONCLUSION: The color of bioactive restorative material is less stable if compared with nanohybrid resin composite. CLINICAL SIGNIFICANCE: As tea and coffee are popular beverages, particularly in Middle Eastern nations, dentists must advise patients about the color change of resin restorations. Patients are advised to brush their teeth immediately after consuming these beverages. How to cite this article: Saber EH, Abielhassan MH, Abed YA, et al. Color Stability of Bioactive Restorative Material vs Nanohybrid Resin Composite: An In Vitro Study. J Contemp Dent Pract 2024;25(3):221-225.

Optical properties of zirconia-reinforced lithium silicate veneers obtained with CAD/CAM milling and hot-pressing techniques: a comparative in vitro study.

Background and aims: Dental veneers have become increasingly required among patients, but little is known about the optical properties of veneers obtained from the same ceramic material through different processing techniques. Methods: In this study we compared the translucency and the opalescence parameters of zirconia-reinforced lithium silicate (ZLS) veneers restorations fabricated through CAD/CAM milling and hot-pressing techniques on the upper central incisor. Eighty specimens divided into 8 groups (n=10) were sectioned (Celtra Duo) and heat pressed (Celtra Press) to obtain 0.8 mm thickness. The optical parameters were calculated from the color difference against different backgrounds. Analysis of variance, one way ANOVA and post-hoc multiple comparison tests were used to evaluate and compare the optical properties of the same material, with a significance level of p < 0.05. Results: The processing method had significant effect on optical parameters. Celtra Duo HT proved to be the material with the highest transparency degree. The hot-pressing technique led to higher opacity than CAD/CAM milling technique. Conclusions: For a bio-mimetic aesthetic prosthetic restoration, the ceramic materials must have the same translucency and opacity as the real tooth. The results of this study revealed that high translucency ZLS obtained through hot pressing technique was the material of choice, as it fulfilled these requirements.

Semisynthesis of Betaxanthins from Purified Betacyanin of Opuntia dillenii sp.: Color Stability and Antiradical Capacity.

The availability of pure individual betalains in sufficient quantities which permit deeper understanding is still a challenge. This study investigates the high-yielding semisynthesis of betaxanthins using betalamic acid from a natural source (Opuntia dillenii), followed by condensation with ʟ-amino acids and further purification. Moreover, the color stability of the four synthesized individual betaxanthins, namely proline (ʟ-ProBX), alanine (ʟ-AlaBX), leucine (ʟ-LeuBX), and phenylalanine (ʟ-PheBX) betaxanthins, was investigated at different pHs. Their relative contribution to free radical scavenging was also scrutinized by TEAC and DPPH. ʟ-AlaBX and ʟ-LeuBx showed a significantly (p < 0.05) higher antioxidant activity, whereas ʟ-ProBX was the most resistant to the hydrolysis of betaxanthin and hence the least susceptible to color change. The color stability was strongly influenced by pH, with the color of ʟ-ProBX, ʟ-LeuBX, and ʟ-AlaBX at pH 6 being more stable, probably due to the easier hydrolysis under acid conditions. The semisynthesis and purification allowed us to have available remarkable quantities of pure individual betaxanthins of Opuntia dillenii for the first time, and to establish their color properties and antioxidant capacity. This study could be a step forward in the development of the best natural food colorant formulation, based on the betalain structure, which is of special interest in food technology.

The quality and nutritional value of beef from Angus steers fed different levels of humate (K Humate S100R).

This study compared the effect of four levels of K Humate S100R (potassium humate) supplementation on the quality, shelf-life, and nutritional properties of beef. Angus steers (n = 40) were individually housed and fed either 0, 35, 70, or 140 g K Humate S100R/animal/day for 100 days, following a 30 day adjustment period. The steers were slaughtered at the completion of the feeding study. The left m. longissimus lumborum (LL) was collected at 24 h post-mortem and aged for either 2 or 6 weeks before analysis. K Humate S100R supplementation did not affect beef drip loss, cooking loss, shear force, sarcomere length, ultimate pH, intramuscular fat content, or total volatile basic nitrogen concentrations (P > 0.05). Steers supplemented with 70 g/day K Humate S100R produced beef with higher a* values on Days 1 and 3 of retail display (P < 0.05). Beef mineral composition was unchanged by K Humate S100R supplementation (P > 0.05), but there were minor changes to the fatty acid profile. Specifically, the ratio of omega-6 to omega-3 (P < 0.05) and C20:2n-6 concentrations (P < 0.05) increased with supplementation level. Together, these results demonstrate no detrimental effects on beef quality and shelf-life as a result of K Humate S100R supplementation.

In Vitro Comparison of Optical Properties Between Single-Shade and Conventional Composite Resin Restorations.

INTRODUCTION: The recently developed single-shade composite resin (using the concept of structural coloring) is a promising option to eliminate the process and subjectivity of shade selection. However, current evidence of its performance is still insufficient. This study aimed to evaluate the color matching, color stability, and refractive index (RI) of single-shade restorations compared with conventional composite resin. METHODS: This in vitro study was conducted on 48 extracted maxillary premolars. The teeth were sorted into three tooth shade groups (B2, A3, and A3.5). Each group included two subgroups based on the materials used: Omnichroma (OM; Tokuyama Dental, Tokyo, Japan) and Filtek Z350 (FT; 3M ESPE, St. Paul, MN, USA). Buccal and lingual Class V round cavities were prepared and restored according to the randomly assigned subgroups, with the test single-shade material (OM) on one surface and the matching conventional control material (FT) of the proper shade on the other surface of each tooth. Color matching was evaluated by visual assessment and a spectrophotometer. All specimens were distributed into four staining groups and immersed in various staining beverages (black coffee, Arabic coffee, Coca-Cola, and distilled water) for four weeks. Color changes were assessed using a spectrophotometer. Four groups of disc-shaped specimens (single-shade, B2, A3, and A3.5) were fabricated to evaluate the RI using a refractometer. Statistical analyses were performed to compare the materials. RESULTS: The mean value of the color difference (ΔE) of single-shade restorations was significantly higher than that of paired conventional restorations in all shade groups. The highest mean ΔE was in subgroup A3.5-OM (8.84 ± 2.39) and showed significantly less color matching than other OM subgroups (p=0.009). The visual assessment showed comparable and acceptable color matching in all subgroups except A3.5-OM (p=0.006). There was a significant color change after the staining test within and across staining groups, but the color change was comparable between the OM and FT subgroups. The RI of single-shade material was significantly higher than conventional material (p<0.05). CONCLUSION: The color matching of single-shade restorations was affected by tooth shade. Its color stability was influenced by various staining substances but was similar to conventional restorations.