The effect of fluoride varnish application on colour change due to paediatric drug usage in polyacid-modified composite resin: an in vitro study.

OBJECTIVE: Colour stability is important in the long-term aesthetic success of restorative materials and is affected by both internal and external factors. Internal discolourations are due to the properties of the restorative materials. External discolourations can be associated with frequent consumption of food and beverages and the use of suspensions or syrups containing colourants/additives. Fluoride varnish application has an important place in preventive dentistry. The purpose of the research was to examine the protective effect of fluoride varnish application on the colour change on polyacid-modified composite resin restorative materials caused by the use of various paediatric drugs. METHODS: Two hundred ten discs were prepared from polyacid-modified composite resin material and divided into two groups: flouride varnish was applied to one group and flouride varnish was not applied to the other group. The groups were further divided into seven subgroups and the samples were kept in artificial saliva, amoxicillin + clavulanic acid, cefuroxime axetil, clarithromycin, paracetamol, ibuprofen, and iron supplement drug solutions. The colour change values of the discs were measured using a spectrophotometer device before immersion in the drug solutions and on the 7th, 14th, 21st, and 28th days after the immersion. The obtained data were calculated and statistically evaluated using IBM SPSS V23 software. RESULTS: It was found that the application of fluoride varnish in the iron supplement drug group prevented the colour change of the polyacid-modified composite resins for 28 days. In the amoxicillin + clavulanic acid, cefuroxime axetil, and paracetamol groups, the fluoride varnish did not prevent colour change in the polyacid-modified composite resin restorative materials at the end of the 14th day. CONCLUSION: It is thought that fluoride varnish application may be beneficial as a preservative in the colour change of polyacid-modified composite resins due to the use of various paediatric drugs, and this protective feature may be effective for a specific period of time.

Evaluation of the Success of Conventional and Biological Restorative Treatment Approaches for Caries in Primary Molars: An In Vivo Study.

Background: In order to compare the clinical and radiographic success of three treatment modalities-conventional restoration (CR), nonrestorative caries treatment (NRCT), and Hall technique (HT), with a 3-month to 1 year follow-up in deciduous molars with occlusal or proximal carious lesions. Design: Children between the ages of 5 and 8 were chosen for the study, having a total of 120 teeth. They were split into three groups, each with 40 participants-CR, HT, and NRCT. Clinical and radiographic evaluation was done at 3, 6, 9, and 12 months. Data were statistically analyzed. Results: The Chi-squared value and p-value were found to be insignificant when comparing clinical and radiographic ratings of all three groups at 3, 6, 9, and 12-month intervals. Conclusion: Hall technique (HT) performed better than CR. NRCT was more acceptable to patients than CR. How to cite this article: Undre MI, Chunawala Y, Choubey S, et al. Evaluation of the Success of Conventional and Biological Restorative Treatment Approaches for Caries in Primary Molars: An In Vivo Study. Int J Clin Pediatr Dent 2023;16(4):591-597.

The effects of gastric acid on pediatric restorative materials: SEM analysis.

In this study, we aimed to demonstrate changes in the surface roughness and microhardness of three different restorative materials routinely used in pediatric dentistry (composite, compomer and resin-modified glass ionomer cement (RMCIS)) in response to continuous daily exposure to gastric acid. Twelve samples of each of type of restorative material were prepared. Eleven of the specimens were included in the gastric acid cycle. The microhardness and surface roughness of ten samples were measured before and after the cycle. Another sample included in the cycle was compared with the sample not included in the cycle by scanning electron microscopy (SEM). There was a significant difference between the groups in terms of roughness scores following gastric acid cycle (p = 0.039). RMCIS material possessed the highest roughness value. A significant difference was identified in terms of microhardness levels before and after the gastric acid cycle (p = 0.001). The most significant change was observed in the compomer material. SEM analysis, performed after the gastric acid cycle, revealed that most cracks were identified in RMCIS material; this was followed by compomer and composite materials, respectively. Our analysis indicates that the restorative materials used frequently in pediatric dental procedures, show increased surface roughness and reduced microhardness when exposed to gastric acid.

Compomers for the restorative treatment of dental caries in primary teeth: An umbrella review.

OBJECTIVES: This umbrella review comprehensively appraised the evidence on the use of compomers in comparison to other dental filling materials for restorative treatment of decayed primary teeth. DATA: The literature search was conducted based on the question: "Is the use of compomers as a dental filling material more successful in the restorative treatment of decayed primary teeth than other dental filling materials?" No language restriction was applied and systematic reviews published up to May 2023 were included. The ROBIS tool was used to assess the methodological quality of the included systematic reviews. Data were extracted for narrative synthesis, considering the restoration failure/success outcomes. SEARCH: Online search was conducted in three databases (PubMed/Medline, Embase and Cochrane library). STUDY SELECTION: The electronic search yielded a total of 779 publications. Finally, 18 systematic reviews were included in this umbrella review. Four systematic reviews presented a low risk of bias, 11 presented an unclear risk of bias and three presented a high risk of bias. Most systematic reviews presenting low risk of bias reported no difference in the success rates of compomers compared to other dental filling materials used for restoration of decayed primary teeth. Studies that found a significant difference or that made clear recommendations towards the use of compomers were commonly rated with a high risk of bias. CONCLUSION: Compomers are similar to other dental filling materials for the placement of direct restorations in primary teeth. CLINICAL SIGNIFICANCE: The results of this umbrella review indicate a similar clinical performance of compomers compared to other materials containing a resin component for direct restoration in primary teeth. Therefore, the choice of restorative material will depend on multiple factors, such as clinician's skills/preferences, patients' wishes, costs, and cavity type/location.

Treatment success of carious primary molars with marginal breakdown: comparison of three treatment approaches in a real-world clinical setting (using decision tree analysis).

OBJECTIVES: Treatment of carious primary molars is always indicated, especially on young children; however, there are no clear guidelines that precisely explain the best treatment approach for Class II carious molars with marginal breakdown (International Caries Detection and Assessment System [ICDAS] 5). The objective of this prospective observational clinical study was to assess the efficacy of three restorative techniques in treating ICDAS 5 Class II lesions in primary molars: compomer fillings (CF), preformed metal crowns (PMC), and pulpotomy and conventional preformed metal crowns (PMC+P). The secondary goal was to evaluate the impact of some cofactors on the course of treatment. METHOD AND MATERIALS: Overall, 92 children (female, n = 50, 54.3%; male, n = 42, 45.7%) aged 2 to 9 years old (mean age = 5.9 ± 1.9 years) with 166 treated teeth were included. The average number of decayed, missing, or filled teeth (d3mft) of the whole sample was 8.0 ± 3.4. The distribution of the sample according to type of treatment was CF = 53 (31.9%), PMC = 64 (38.6%), and PMC+P = 49 (29.5%). Paired t test, nonparametric Friedman ANOVA test, and decision tree analysis were used as the basis for the statistics. RESULTS: After 12 months, data from 75.8% (72/95) treated patients, corresponding to 62.0% (103/166) of the treated teeth (CF = 42/53, 79.2%; PMC = 38/64, 59.4%; PMC+P = 23/49, 46.9%) were available for analysis. The mean patients age was 6.8 ± 1.8 years; 32 (47.1%) boys and 36 (52.9%) girls. The mean d3mft of the remaining sample was 7.8 ± 3.35. PMC and PMC+P arms showed the highest success rates (> 91%) as compared to the CF arm, which showed the lowest success rates (61.9%), with 9/42 teeth of the CF group (21.4%) presenting with minor failures, and 7/42 teeth (16.7%) with major failures (P < .0001). CONCLUSION: According to the decision tree analysis, PMC and PMC+P had a success rate of 99%, whereas CF had a success rate of only 69%. Some cofactors (treatment decision, Approximal Plaque Index, and tooth number) had a higher impact on the decision tree analysis than others (age, dmfs, and dmft values), especially when the treatment selection was CF. In future studies it is necessary to examine the impact of other cofactors on the outcomes of conventional fillings using a larger sample size.

A registry-based study of tooth-colored restorative materials for decayed teeth in Taiwan.

Background/purpose: As esthetic demands with direct restorations, tooth-colored materials were used to replace amalgam filling gradually. However, little is known about the tooth-colored restorative materials for decayed teeth in Taiwan. In this study, the use of composite resin, glass ionomer cement, and compomer was analyzed by National Health Insurance Research Database (NHIRD). Materials and methods: A retrospective study was conducted to analyze the registered database compiled by Taiwanese NHIRD from 1997 to 2013. The results were further to analyze the application of tooth-colored restorative materials by sex and age. In addition, time trends of dental visits for each tooth-colored restorative material were also investigated. Results: The average annual composite resin filling (CRF) ratio was 18.41% of nationwide population in Taiwan. The prevalence of CRF stratified by sex and age was significantly increased from 1997 to 2013 (P for trend <0.0001). The time trends of dental visits for CRF were significantly increased (P for trend <0.0001). The average annual glass ionomer cement filling (GICF) ratio was 1.79% of Taiwanese population. The prevalence of GICF stratified by sex and age was demonstrated a decreased pattern (P for trend <0.0001). The time trends of dental visits for GICF were significantly decreased (P for trend <0.0001). The average annual compomer filling ratio was 0.57% of whole population in Taiwan. Conclusion: Form the results of this registry-based study, a significant increased trend of CRF for decayed teeth was observed in Taiwanese population during past 17 years.

12-Month flexural mechanical properties of conventional and self-adhesive flowable resin composite materials.

The aim of this study was to investigate the 12-month flexural mechanical properties of 23 flowable resin-based composites (FRBC) that included 5 self-adhesive FRBC materials. Specimens were evaluated following ISO 4049:2019 guidelines, but additionally stored in physiologic 0.2M phosphate buffered saline solution being tested at 24 h, 1 week, 1 month, and at 3-, 6-, 9-, and 12-months. While some deviation and degradation were noted at testing intervals, conventional FRBC materials overall demonstrated greater flexural strength than the self-adhesive and compomer materials. Three self-adhesive materials and the compomer were below recommended ISO 4049:2019 flexural strength values at 24 h with another after 6 months storage. Conventional FRBC materials, except at 1 month, overall demonstrated increased flexural modulus than the self-adhesive FRBC materials. Although results were material dependent, conventional FRBC materials demonstrated overall greater flexural mechanical properties as compared to the self-adhesive FRBC materials and the compomer evaluated.

The assessment of internal adaptation and fracture resistance of glass ionomer and resin-based restorative materials applied after different caries removal techniques in primary teeth: an in-vitro study.

Background: The aim of this study was to evaluate the 3-dimensional (3D) internal adaptation (IA) and fracture resistance (FR) of compomer and glass ionomers applied after conventional caries removal to sound dentin (CCRSD) and selective caries removal to firm dentin (SCRFD) in in-vitro. Methods: Thirty extracted primary molars were randomly assigned to three main groups (n = 10) as glass hybrid restorative (GHR) (Equia Forte® HT), conventional glass ionomer (CGIR) (Voco Ionofil Molar) and compomer (Dyract XP). Each group was randomly divided into two subgroups according to caries removal technique as CCRSD (n = 5) and SCRFD (n = 5). The restoration procedures were completed after caries removal (CCRSD or SCRFD) in all samples. Then, specimens were subjected to IA and FR tests. Data were analyzed with Student's t, one-way ANOVA, and Kruskal Wallis-H tests. The correlation between IA and FR results was analyzed with a Pearson test. The statistical significance level was considered as 5%. Results: While CCRSD showed superior IA results than SCRFD for all restorative materials (p < 0.05), no statistical difference was found between CCRSD and SCRFD in FR assessment (p > 0.05). In CCRSD, compomer showed superior results for IA and FR than glass ionomers (p < 0.05). In SCRFD, it was found no significant difference between the restoratives for IA (p > 0.05). However, compomer showed superior FR results than glass ionomers (p < 0.05). There was moderate negative correlation between internal voids and FR without statistically significant difference (r = -0.333, p = 0.072). Conclusions: Despite the advantages of SCRFD, it was found to be less superior than CCRSD in IA assessment. Therefore, when SCRFD is preferred, a peripheral seal should be provided for ideal restorative treatment. On the other hand, compomer mostly showed superior results compared to others.

Effect of topical fluoride applications on residual monomer release from resin-based restorative materials.

BACKGROUND: The effects of topical fluoride applications on the release of monomer ingredients from resin-based dental materials by immersion in various extraction solutions are unclear. The aim of this study was to determine the effect of topical fluorides (APF and NaF) on the elution of residual monomers (Bis-GMA, TEGDMA, UDMA, and HEMA) from resin-based materials. METHODS: Ninety specimens were prepared, 30 bulk-fill composite resin, 30 nanohybrid universal composite resin, and 30 polyacid-modified composite resin (compomer). These were randomly divided into three groups based on fluoride application procedures. Each specimen was kept in 75% ethanol solution, and residual monomers released from materials were analyzed using high-performance liquid chromatography (HPLC) after 10 min, 1 h, 24 h, and 30 days. The groups were compared using the Mann Whitney U and Kruskal Wallis tests. Measurements were analyzed using the Friedman and Wilcoxon signed-rank tests. RESULTS: Fluoride applications generally had no considerable effect on the amount of residual monomer released from resin-based restorative materials. The amount of monomer release after topical APF application was similar to the release in the control group and was lower than the release in the NaF group. The release of monomers from the resin-based material used in the study did not approach toxic levels at the applied time intervals. The compomer released lower amounts of monomer than other resin-based materials. CONCLUSIONS: Fluoride applications do not increase monomer release from resin-based restorative materials. However, compomers should be employed by clinicians due to their lower monomer release compared to other resin restorative materials. The release of monomers from all the resin-based materials did not approach toxic levels at the applied time intervals.

Comparison of shear bond strength of composite resin, compomer, and resin-modified glass-ionomer cements in primary teeth: An in-vitro study.

OBJECTIVE: The contemporary esthetic restorative materials such as composite resin and glass-ionomer cements and their modifications have all been developed keeping in mind the requirements of permanent teeth. There have been plenty of studies that have focused on the characteristics of these materials in relation to permanent teeth with a relative dearth of such studies as regard to the primary teeth. The present study was undertaken to compare and evaluate the shear bond strength of composite resin, compomer, and resin-modified glass-ionomer cements in primary teeth. METHODS: Thirty non-carious primary molars that were indicated for extraction because of physiological resorption or, for orthodontic reasons, were selected. The selected teeth were randomly allocated to three groups of 10 each for composite, compomer, and resin-modified glass-ionomer cements. The enamel from the occlusal surface of all teeth was removed to expose the superficial dentin and was wet polished with 400 grit sand paper. Composite, compomer, and resin-modified glass-ionomer stubs were bonded on to the occlusal surfaces using a plastic tube as a template. All samples were, then, subjected to thermocycling and evaluation of shear bond strength using the universal testing machine at a cross-head speed of 0.5 mm/min, whereas the results obtained were subjected to statistical analysis. Statistical analysis was performed using Statistical Package for Social Sciences (SPSS) version 17.0 (SPSS Inc., Chicago, IL, USA), whereas one-way analysis of variance (ANOVA) and Tukey's multiple post-hoc procedures were used for statistical analysis. A P < 0.05 was considered statistically significant. RESULTS: The mean shear bond strength values for Groups I, II, and III were found to be 11.7 ± 3.07 MPa, 7.74 ± 4.16 Mpa, and 4.43 ± 2.08 Mpa, respectively, whereas one-way ANOVA and Tukey's multiple post-hoc procedures indicated that there were remarkable differences among the three groups with the results being statistically significant (P < 0.05). CONCLUSIONS: Composite resin showed the highest shear bond strength in relation to primary dentin when compared to compomer and resin-modified glass-ionomer cements.

Comparative Evaluation of Shear Bond Strength of Nanohybrid Composite Restoration After the Placement of Flowable Compomer and Composite Using the Snowplow Technique.

AIM: Based on the importance of bonding during restoration, this in vitro study aimed to evaluate the difference in shear bond strength of nanohybrid composite restoration in molars after the placement of flowable compomer and composite using the snowplow technique. MATERIALS AND METHODS: Twenty-four freshly extracted molars were taken and sectioned at the level of 2.5 mm from the coronal cusp and root tip. These sections were embedded in methacrylate and, after etching and bonding, were randomly divided into two groups (n=12) for placement of restorative materials. In group A, the plastic tube was filled with uncured flowable composite resin followed by the placement of packable nanohybrid composite in oblique increments. In group B, the plastic tube was filled with uncured flowable compomer followed by the placement of packable nanohybrid composite in oblique increments. Each specimen was then tested under a universal testing machine to determine the shear bond strength. RESULTS: Independent sample 't' test revealed a statistically significant difference between the mean shear bond strength of compomer and composite (P value<0.001), where flowable composite showed higher values compared to compomer.  Conclusion: It was seen that the use of composite showed a significantly better bond strength of the restoration when compared to compomer using the snowplow technique. Both materials and application techniques can influence the bond strength of a material as determined in this study.

Evaluation of residual monomer release after polymerization of different restorative materials used in pediatric dentistry.

BACKGROUND: The choice of the restorative resin material to be used in pediatric dentistry is of a great importance due to the cytotoxic effects caused by residual monomers. In this study, it was aimed to investigate the amount of residual monomer released over time from different resin-based restorative materials, which are widely used in pediatric dentistry, by using high performance liquid chromatography with photodiode array detector (HPLC-PDA). METHODS: The compomers in all colors (Twinky Star and Glasiositte A2), two composites with different hybrid properties (Arabesk-GrandioSO), and RMGIC (Ionolux) samples with 2 × 5 mm diameters were prepared. The samples were polymerized with an LED light unit (CELALUX 2, VOCO, Cuxhaven, Germany) and then finishing-polishing procedures were applied. A total of 156 samples were obtained, 13 samples in each of the 12 groups. The amount of residual monomer (BIS-GMA; HEMA, TEGDMA, UDMA) (µg/mL) released into the 75% ethanol solution was determined at different times, (1st hour, 1st, 7th, 14th, and 21st day) by using HPLC-PDA. RESULTS: The residual monomer release continued on day 21 and BIS-GMA was the most released monomer in all groups. HEMA release showed a maximum increase in all the materials at day 7. The highest amount of residual monomer was detected in the gold-colored compomer. HEMA and BIS-GMA release from RMGIC was less than others in all time frames. CONCLUSIONS: The color and composition of resin-based restorative materials affect the amount of residual monomer. Pediatric dentists should prefer gold-colored compomers less than others as a restorative material, especially in deep cavities. More studies are needed about the subject.

Effect of erosive challenge with HCl on restorative materials.

OBJECTIVE: Investigate the effect of erosive challenge with hydrochloric acid (HCl) on the surface of five different restorative materials. MATERIAL AND METHODS: Ten plates of five restorative materials (Admira Fusion, Activa BioActive-Restorative, Charisma, Equia Forte HT Fil/EF, Filtek Universal Restorative/FU) were obtained. Half of the plate surfaces was covered with an adhesive tape, creating a control area, and the other side was submitted to the HCl (0.06 M HCl; pH 1.2; at 37 °C; for 30 h). Plates with control and HCl-treated areas were analyzed regarding the surface roughness (Sa), roughness profile (Rv), surface loss (SL), microhardness (MI), and gloss (GL) (n = 10). Surface morphology was analyzed by SEM and chemical elements were identified by EDX (n = 5). Data were evaluated by ANOVA and Tukey's test (α = 0.05). RESULTS: Most materials were not affected by HCl. FU showed the lowest Sa and Rv, and the highest GL after HCl. On the other hand, EF presented the highest Sa, Rv, and SL, and the lowest GL. The MI of materials was not changed after HCl. Topographical and chemical alterations were observed after HCl only for EF. CONCLUSIONS: The composites showed minor surface changes after HCl, which was not observed for the glass ionomer cement (EF). FU presented the best performance regarding the parameters evaluated. CLINICAL RELEVANCE: The effects of erosive challenge with HCl on composites were minimal, while the glass ionomer cements might not be indicated as restorative material for patients with gastroesophageal reflux disease.

Effect of Finishing-Polishing Procedures on Cytotoxicity of Resin-Based Restorative Materials via Real-Time Cell Analysis.

OBJECTIVE: The aim of this study was to evaluate the effect of finishing and polishing procedures of compomer and bulk-fill composite resins on cytotoxicity against human gingival fibroblasts by xCELLigence analysis. STUDY DESIGN: Filtek™ Bulk Fill composite and Dyract XP compomer were used. After curing, the specimens were randomly divided into two groups and finishing-polishing procedures were applied to one group; no finishing-polishing procedures were applied to the other group. For the first time in this study, pure gold samples were prepared with the same weight and base area as the test specimens and the wells containing the pure gold samples were determined as the control group. xCELLigence system was used to assess the response of the human gingival fibroblasts after exposure to test specimens. Measurements were recorded for 72 hours after adding specimens. RESULTS: Finishing and polishing procedures caused a significant increase in cell viability of Dyract XP compomer samples at all time periods; the percentage of cell viability reached above 70% after finishing and polishing procedures. However, significant effects were not observed in Filtek™ Bulk Fill composite samples at any time period. CONCLUSION: Finishing and polishing procedures play an essential role in increasing the biocompatibility of Dyract XP compomer. It is recommended to apply finishing and polishing procedures even though a smooth surface may be obtained in restorations with matrix strips.

The Effects of Mouthwashes on the Color Stability of Resin-Based Restorative Materials / Efecto de los enjuagues orales en la estabilidad del color de materiales restauradores a base de resina

Abstract: Objective: This study investigated the effects of three types of mouthwash on the color stability of three resin-based restorative materials (nanohybrid resin composite, sonic-activated bulk-fill material, and compomer). Materials and Methods: To this end, 120 cylindrical disc specimens were prepared and polished, after which they were incubated in distilled water for 24 hours for post-polymerization. The baseline color values of each specimen were measured with a spectrophotometer, then the specimens were randomly divided into four groups. Following immersion in the mouthwashes for 24 hours, the specimens were rinsed with distilled water and dried before the color measurement was repeated. The values of color change (ΔE₀₀) were subsequently calculated. A two-way analysis of variance and Duncan's post hoc multiple comparison tests were conducted to determine statistically significant differences among the restorative materials. Results: All samples showed discoloration after immersion, albeit some instances of discoloration were imperceptible. In this respect, a statistically significant difference was found among the restorative materials and mouthwashes (p<0.05). Imperceptible ΔE₀₀ values were derived on the nanohybrid resin composite and compomer, but perceptible and acceptable ΔE₀₀ values were detected on the sonic-activated bulk-fill materials (p<0.05). The clinically unacceptable discoloration was observed on the sonic-activated bulk-fill composite immersed in Listerine®. Conclusions: Clinicians should make recommendations based on the potential staining capacity of mouthwashes prescribed for daily use in restorative materials. In this way, the need for renewal of restorations due to discoloration could be avoided.

Resumen: Objetivo: Este estudio investigó los efectos de tres tipos de enjuague bucal en la estabilidad del color de tres materiales de restauración a base de resina (resina nanohíbrida, resina bulk-fill de activación sónica y compómero). Materiales y Métodos: Para ello se prepararon y pulieron 120 muestras de discos cilíndricos, después de lo cual se incubaron en agua destilada durante 24 horas pospolimerización. Los valores de color de base de cada muestra se midieron con un espectrofotómetro, después las muestras se dividieron aleatoriamente en cuatro grupos. Tras la inmersión en los enjuagues bucales durante 24 horas, los especímenes se enjuagaron con agua destilada y se secaron antes de repetir la medición del color. Posteriormente se calcularon los valores de cambio de color (ΔE₀₀). Se llevó a cabo un análisis bidireccional de la varianza y las pruebas de comparación múltiple post hoc de Duncan para determinar las diferencias estadísticamente significativas entre los materiales de restauración. Resultados: Todas las muestras mostraron decoloración después de la inmersión, aunque algunos casos esta fue imperceptible. Se encontró una diferencia estadísticamente significativa entre los materiales de restauración y los enjuagues bucales (p<0,05). Se obtuvieron valores imperceptibles de ΔE₀₀ en el compuesto de resina nanohíbrida y el compómero, pero se detectaron valores perceptibles y aceptables de ΔE₀₀ en la resina bulk-fill activada sónicamente (p<0,05). Se observó una decoloración clínicamente inaceptable en la resina bulk-fill activada sónicamente inmersa en Listerine®. Conclusiones: Los clínicos deben hacer recomendaciones basadas en la capacidad potencial de coloración de los enjuagues bucales prescritos para uso diario en los materiales de restauración. De esta manera, se podría evitar la necesidad de renovar las restauraciones debido a la decoloración.

The effect of current pulp capping materials against intrapulpal temperature increase in primary teeth. An in-vitro study by pulpal microcirculation simulation model.

BACKGROUND/PURPOSE: Widespread use of light-cured materials has raised the issue of possible thermal effects on pulp tissue. It was aimed to investigate the effectiveness of pulp capping materials (PCM) against intrapulpal temperature increases (ITI) in primary teeth during light-curing of compomers in this study. MATERIALS AND METHODS: A Class-I cavity was prepared on the primary mandibular second molar tooth. An experimental mechanism was used for pulpal microcirculation and temperature regulation of the tooth. There are eight groups in the study: in Groups 1-6: MTA-Angelus, Biodentine, TheraCal LC, Dycal, conventional Glass Ionomer Cement (GIC) and resin-modified GIC were used as PCM, respectively. In Group-7 no PCM was used. In Group-8 only light was applied to the cavity without any PCM or compomer. Compomer restorations were applied in Groups 1-7 with the same material (Dyract XP, DENTSPLY, Weybridge, UK) and light cured for 10sec with the same light-curing unit (Kerr, Demi Plus, 1200 mW/cm2). Temperature changes (Δt) in the pulp chamber were measured and statistically analysed with Kruskal-Wallis and Mann Whitney U tests. RESULTS: The highest Δt-value (4.57 ±â€¯0.11 °C) was measured in Group-4 and 7. The lowest Δt-value (3.94 ±â€¯0.4 °C) was measured in Group-8. Δt-values measured in the Groups 2, 3 and 6 were significantly lower than the values measured in Group-4 and 7 (p = 0.001). ITI during the light-curing of the PCM used in Group-3 and 6 exceeded the critical value (5.5 °C) reported in the literature. CONCLUSION: In protecting the pulp from the harmful thermal effects of restorative procedures Biodentine which is a self-cured material, may be most acceptable choice as an indirect PCM.

One-year clinical evaluation of two high-viscosity glass-ionomer cements in class II restorations of primary molars.

BACKGROUND: Little information exists on the clinical performance of restorative materials on primary teeth of preschool children. This study aimed to evaluate clinical performance of compomer, glass-hybrid-added high-viscosity glass-ionomer cement and zinc-added high-viscosity glass-ionomer cement materials in class ΙΙ restorations of primary molars. METHODS: The study included 251 teeth of 57 patients aged 4-7 years with proximal caries in primary molars. The teeth were divided into three groups, and each restorative material was randomly distributed. Dyract XP, Equia Forte and ChemFil Rock materials were placed after cavity preparation and clinically evaluated at 3, 6, 9 and 12 months using modified United States Public Health Service criteria. Statistical analyses were performed using chi-square and z tests. RESULTS: At the end of 12 months, a total of three restorations in Dyract XP group, 22 in Equia Forte group and 11 in ChemFil Rock group failed in retention criteria. No statistically significant difference existed between retention, colour match and surface texture criteria of all groups at 3 and 6 months, but a statistically significant difference was found at 12 months (P < 0.05). CONCLUSION: For class ΙΙ restorations of primary molars, the success of compomer material was superior to high-viscosity glass-ionomer materials.

Comparative Evaluation of the Influence of Different Sports/Energy Drinks and Alcoholic Beverages on the Surface Roughness of Three Different Flowable Esthetic Restorative Materials: An In Vitro Analysis.

OBJECTIVE: This study aimed to evaluate the surface roughness of three flowable esthetic restorative materials after exposure to sports/energy drinks and alcoholic beverages. MATERIALS AND METHODS: A total of 210 specimens of dimension (2cm diameter and 2 mm thickness) with giomer, compomer, and composite (70 samples with each esthetic material) were made with the help of plastic rings. The prepared samples were tested in six experimental sports/energy drinks (beer, whiskey, vodka, Gatorade, Red Bull, and Sting) and distilled water was considered as the control group. Profilometric analyses of all samples were recorded before immersing into the experimental and control solutions. Then, the samples were stored in the experimental and control group solutions for 5min for 30 days. The profilometric analysis was repeated after 30 days and records were statistically analyzed. RESULTS: Flowable composite showed the minimum surface roughness, whereas the flowable compomer showed the maximum surface roughness in the present test conditions. When the erosive potential of the test solutions was evaluated, surface roughness values were more for sports/energy drinks when compared to that of alcoholic beverages. CONCLUSION: All the sports/energy drinks and alcoholic beverages evaluated in this study altered the surface roughness of the tested restorative materials. The effects ranged from slight to a markedly negative impact on the surface roughness of the test restorative materials.

Evaluation of mechanical properties of fluoride-releasing dental materials after multiple fluoride recharge/discharge application / Avaliação das propriedades mecânicas de materiais dentários liberadores de flúor após aplicação múltipla de recarga/descarga de flúor

This study aimed to determine the mechanical properties of fluoride-releasing dental materials after an accelerated fluoride recharge/discharge procedure. Two fluoride-releasing glass ionomer types of cement (Ketac Molar Easymix and IonoStar Molar), a resin-modified glass ionomer (Photac Fil Quick Aplicap), and two compomers (Compoglass F and Glasiosite) were used in this study. A total of 30 rectangular specimens and 30 disk specimens of each material were prepared and placed in distilled/deionized water (n = 5). The amount of fluoride released was analyzed from the materials for 7-day discharge, 1st recharge, 7-day discharge, 2nd recharge, and 7-day discharge, and 3rd recharge. The de/pre- and post-recharge fluoride release were measured using an ion chromatography for 24 days. The flexural strength and microhardness of each group were evaluated. The microhardness of all restorative materials showed no significant change (p > 0.05) over the experimental period. The flexural strength properties of the restorative materials did not change within the time of the study. The study showed that the fluoride release/uptake causes no effect on the mechanical and physical properties of dental materials.

Este estudo teve como objetivo determinar as propriedades mecânicas de materiais dentários liberadores de flúor após um procedimento acelerado de recarga/descarga de flúor. Dois tipos de cimento de ionômero de vidro liberador de flúor (Ketac Molar Easymix e IonoStar Molar), um ionômero de vidro modificado por resina (Photac Fil Quick Aplicap) e dois compômeros (Compoglass F e Glasiosite) foram utilizados neste estudo. Um total de 30 amostras retangulares e 30 amostras de disco de cada material foram preparadas e colocadas em água destilada/deionizada (n = 5). A quantidade de fluoreto liberado foi analisada a partir dos materiais para descarga em 7 dias, 1ª recarga, descarga em 7 dias, 2ª recarga e descarga em 7 dias e 3ª recarga. A liberação de fluoreto pré e pós-recarga foi medida usando uma cromatografia de íons por 24 dias. A resistência à flexão e a microdureza de cada grupo foram avaliadas. A microdureza de todos os materiais restauradores não apresentou alteração significativa (p > 0,05) durante o período experimental. As propriedades de resistência à flexão dos materiais restauradores não mudaram no período do estudo. O estudo mostrou que a liberação/captação de flúor não afeta as propriedades mecânicas e físicas dos materiais dentários.

Commercially Available Fluoride-Releasing Restorative Materials: A Review and a Proposal for Classification.

Resin composite and glass ionomer cement (GIC) are the most commonly used dental materials to perform direct restorations. Both have specific characteristics that explain their popularity and their limits. More than 20 years ago, the first attempt (followed by others) to combine the advantages of these two families was performed with compomers, but it was not very successful. Recently, new formulations (also called 'smart materials') with claimed ion release properties have been proposed under different family names, but there are few studies on them and explanations of their chemistries. This comprehensive review aims to gather the compositions; the setting reactions; the mechanical, self-adhesive, and potential bulk-fill properties; and the ion release abilities of the large existing families of fluoride-releasing restorative materials and the new restorative materials to precisely describe their characteristics, their eventual bioactivities, and classify them for an improved understanding of these materials. Based on this work, the whole GIC family, including resin-modified and highly viscous formulations, was found to be bioactive. Cention N (Ivoclar Vivadent, AG, Schaan, Lietschentein) is the first commercially available bioactive resin composite.