Comparison of conjoined tendon-preserving posterior approach and conventional posterolateral approach in hemiarthroplasty for femoral neck fracture in the elderly: A multicenter (TRON group) retrospective study.

BACKGROUND: Femoral neck fractures (FNF) are one of the most common traumatic injuries in the elderly. The conjoined tendon-preserving posterior (CPP) approach was developed as a modification of the conventional posterolateral (PL) approach in hemiarthroplasty (HA) for displaced femoral neck fractures (FNF) to reduce postoperative dislocation. We hypothesized that the CPP approach would result in fewer dislocations and similar functional and radiographic outcomes compared to the PL approach. PATIENTS AND METHODS: This was a retrospective multicenter (TRON group) study. We evaluated the rate of complications, and functional and radiographic outcomes for patients aged >65 years who underwent HA via the PL approach or the CPP approach from 2017 to 2019 and followed up for at least 24 months. To adjust for baseline differences between the groups, a propensity score-matching algorithm was used in a 1:1 ratio. RESULTS: We identified 135 patients who underwent HA via the PL approach and 135 patients via the CPP approach. The mean follow-up period was 32.4 ± 14.0 months. The incidence of dislocation was 6 in 135 patients (4.4%) in the PL group and 0 in 135 patients (0%) in the CPP group, and there was significant difference (p = 0.04). Operation time was equivalent between the two groups (73.1 ± 30.4 vs. 71.8 ± 30.0 min; p = 0.72). The rate of varus insertion of stems in the PL group lower than that in the CPP group (19.3% vs. 33.3%; p = 0.01). Postoperative Parker's mobility score was similar between the two groups at 12 months follow-up (6.17 vs. 6.27; p = 0.81). CONCLUSION: The CPP approach showed a significantly lower dislocation rate, similar functional outcome and more varus stem insertions compared with the PL approach in this retrospective study.

Conjoint tendon lengthening improves internal rotation following reverse total shoulder arthroplasty: a cadaveric study.

BACKGROUND: Reverse shoulder arthroplasty (RSA) is a common procedure for treating a variety of shoulder pathologies. However, many patients struggle with postoperative internal rotation (IR) deficits, which often hinder their activities of daily living. The conjoint tendon provides an anatomic barrier that can impede the postoperative IR of the shoulder, and this study aims to evaluate the effect of a conjoint tendon lengthening on the glenohumeral range of motion (ROM) following RSA. METHODS: This study used ten fresh-frozen cadaver specimens of the upper extremity. An RSA was implanted using a standard deltopectoral approach, and the ROM was assessed postimplantation. Following this, the conjoint tendon was identified and lengthened using a tendon sheath z-plasty, and the ROM was rerecorded. Statistical significance for the ROM gains after conjoint tendon lengthening was determined with a significance level of P < .05. RESULTS: Following the lengthening of the conjoint tendon, there were statistically significant improvements in all ROMs (P < .05). Subjects demonstrated a notable gain in IR to the back by 10.3 cm (P < .01), and all ROMs increased by at least 10°, except for forward flexion, which increased by 6° (P < .001). CONCLUSIONS: This study suggests that lengthening the conjoint tendon improves postoperative ROM of the glenohumeral joint after RSA, offering a potential solution to considerable IR deficits that are commonly encountered post-RSA. Subsequent clinical and biomechanical studies should assess the stability of the shoulder joint following conjoint tendon lengthening.

Biomechanical comparison of open Bankart repair vs. conjoint tendon transfer in a 10% anterior glenoid bone loss shoulder instability model.

BACKGROUND: The treatment of shoulder instability in patients with subcritical glenoid bone loss poses a difficult problem for surgeons as new evidence supports a higher failure rate when a standard arthroscopic Bankart repair is used. The purpose of this study was to compare a conjoint tendon transfer (soft-tissue Bristow) to an open Bankart repair in a cadaveric instability model of 10% glenoid bone loss. METHODS: Eight cadaveric shoulders were tested using a custom testing system that allows for a 6-degree-of-freedom positioning of the glenohumeral joint. The rotator cuff muscles were loaded to simulate physiologic muscle conditions. Four conditions were tested: (1) intact, (2) Bankart lesion with 10% bone loss, (3) conjoint tendon transfer, and (4) open Bankart repair. Range of motion, glenohumeral kinematics, and anterior-inferior translation at 60° of external rotation with 20 N, 30 N, and 40 N were measured in the scapular and coronal planes. Glenohumeral joint translational stiffness was calculated as the linear fit of the translational force-displacement curve. Force to anterior-inferior dislocation was also measured in the coronal plane. Repeated measures analysis of variance with a Bonferroni correction was used for statistical analysis. RESULTS: A Bankart lesion with 10% bone loss increased the range of motion in both the scapular (P = .001) and coronal planes (P = .001). The conjoint tendon transfer had a minimal effect on the range of motion (vs. intact P = .019, .002), but the Bankart repair decreased the range of motion to intact (P = .9, .4). There was a significant decrease in glenohumeral joint translational stiffness for the Bankart lesion compared with intact in the coronal plane (P = .021). The conjoint tendon transfer significantly increased stiffness in the scapular plane (P = .034), and the Bankart repair increased stiffness in the coronal plane (P = .037) compared with the Bankart lesion. The conjoint tendon transfer shifted the humeral head posteriorly at 60° and 90° of external rotation in the scapular plane. The Bankart repair shifted the head posteriorly in maximum external rotation in the coronal plane. There was no significant difference in force to dislocation between the Bankart repair (75.8 ± 6.6 N) and the conjoint tendon transfer (66.5 ± 4.4 N) (P = .151). CONCLUSION: In the setting of subcritical bone loss, both the open Bankart repair and conjoint tendon transfer are biomechanically viable options for the treatment of anterior shoulder instability; further studies are needed to extrapolate these data to the clinical setting.

Randomized Clinical Study on the Efficacy of Direct Anterior Approach Combined With Tendon Release and Repair After Total Hip Arthroplasty.

Background: To study the effect of reconstruction of the joint capsule and conjoint tendon on the functional recovery of the hip joint during direct anterior approach (DAA) total hip arthroplasty. Methods: A total of 60 patients who underwent their first total hip arthroplasty surgery were selected. According to the set criteria, the selected patients were divided into observation group A (n = 30) and control group B (n = 30). In group A, the joint capsule and conjoint tendon (superior muscle, internal obturator muscle, and inferior muscle) were repaired in situ, while in group B, only the joint capsule was repaired in situ, and the conjoint tendon was not repaired. The surgical indicators, including hip joint function and clinical efficacy of the two groups, were compared. Results: After 6 months of follow-up in groups A and B, no dislocation occurred. The Harris Hip scores of group A were higher than those of group B at 1-month post-operation, i.e., p < 0.05, as well as the valid muscle strength and conjoint tendon valid tension, were higher in group A than group B at 1-month postoperative follow-up, i.e., p < 0.05. Conclusion: DAA for total hip arthroplasty on the premise of reconstructing the joint capsule structure can rebuild the tension of the conjoint tendon, enhance its muscle strength, and significantly improve the joint stability and function of the patient early stage. It is beneficial for the patient's rapid recovery and is worth implementing.

Conjoint tendon lengthening for recalcitrant anterior shoulder pain after reverse shoulder arthroplasty: a technique article.

The incidence of reverse shoulder arthroplasty (RSA) has increased since the Food and Drug Administration approved its use in the United States in 2004. With the current RSA implants available for surgeon use within the United States of America, each design, regardless of humeral inlay vs. onlay, distalizes the shoulder's center of rotation. This new center of rotation purposely increases tension to the deltoid, which is the main working muscle in RSA, but also retensions the adjacent tendons. Some patients after RSA experience continued anterior shoulder discomfort that limits their active range of motion and overall patient satisfaction. It has been isolated with physical examination that there is tenderness to palpation at the coracoid process and throughout the conjoint tendon. We have completed conjoint tendon lengthening procedures on this subset of patients with excellent clinical results. This article describes the technique for patients who underwent conjoint tendon lengthening after RSA for recalcitrant anterior shoulder pain.

Structural and Functional Results of Subscapularis and Conjoint Tendon After Latarjet Procedure at 8-Year Average Follow-up.

BACKGROUND: The Latarjet procedure involves initial dissection through a longitudinal split of the subscapularis tendon with only a final partial closure to accommodate the transferred coracoid bone. Furthermore, by transferring the coracoid bone block to the anterior glenoid, the surgeon completely alters the resting and dynamic route of the attached conjoint tendon. The eventual structural and functional integrity of the subscapularis and conjoint tendons is currently unknown. PURPOSE: To examine the structural and functional integrity of the subscapularis and the conjoint tendon after the Latarjet procedure at an 8-year average follow-up. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Twenty patients with anterior shoulder instability at a mean age of 30 years (range, 19-50 years) underwent the open Latarjet procedure. Clinical examination at the final follow-up included quantitative isometric measurement of abduction and internal rotation strength compared with the nonoperative side. Patients were assessed via radiograph examination and preoperative computed tomography. Final position and healing of the transferred coracoid bone block were evaluated using standard radiographs. At follow-up, the subscapularis and conjoint tendon were evaluated via magnetic resonance imaging (MRI) with metal artifact reduction techniques and via ultrasound. RESULTS: Nineteen of the 20 shoulders remained stable at the final follow-up; there was 1 redislocation (5%) after 14 months. The mean Rowe score was 83 points (SD, 17.9 points), the mean Constant score was 85 points (SD, 8.1 points), and the Subjective Shoulder Value was 80% (SD, 18%). The mean abduction strength of the operative shoulder was 7.41 ± 2.06 kg compared with 8.33 ± 2.53 kg for the nonoperative side (P = .02). The mean internal rotation strength at 0° for the operative shoulder was 8.82 ± 3.47 kg compared with 9.06 ± 3.01 kg for the nonoperative side (P = .36). The mean internal rotation strength in the belly-press position for the operative shoulder was 8.12 ± 2.89 kg compared with 8.50 ± 3.03 kg (P = .13). Four of 20 shoulders showed mild tendinopathic changes of the subscapularis tendon but no partial or complete tear. One patient exhibited fatty degeneration Goutallier stage 1. Conjoint tendon was in continuity in all 20 shoulders on MRI scans. CONCLUSION: Abduction, but not internal rotation strength, was slightly reduced after the Latarjet procedure at a mean of 8 years of follow-up. The subscapularis tendon was intact based on ultrasound examination, and the conjoint tendon was intact based on MRI scans. Subscapularis muscle girth relative to the supraspinatus muscle remained intact from preoperative measurements based on MRI scans.

Hamstring origin-anatomy, angle of origin and its possible clinical implications.

INTRODUCTION: The posterior compartment of the thigh is composed of three major muscles collectively known as the hamstring muscles. These consist of the biceps femoris short and long head, semimembranosus and semitendinosus. Excluding the short head of biceps femoris, the hamstrings contribute to the movement of the hip and the knee joints as they span across both joints. Our hypothesis is that the nature of the conjoint tendon -ischial angle predisposes to an increased risk of tearing in this hamstring component. We therefore aim to look at the anatomy of the hamstring origin at the ischial tuberosity and spatial relationship between the long head of biceps, semitendinosus and semimembranosus in the form of vector angles. MATERIAL AND METHODS: 100 consecutive pelvic MRIs in patients under the age of 40 years were reviewed by musculoskeletal radiology fellow and a consultant musculoskeletal radiologist with more than 10 years' experience in musculoskeletal radiology and measured the angle of origin of conjoined tendon and semimembranosus at its ischial origin. P value using a paired t-test was less than 0.0001 confirming that the difference in the vector angle of the different hamstring components was statistically significant. RESULTS: The median angle of origin of conjoined tendon was 12° and for semimembranosus was 6°. Applying the concept of Newton's second law to the angles calculated we demonstrated that an increase of 9% force applied to the conjoint tendon origin when compared to the semimembranosus tendon. CONCLUSION: We hypothesis that the difference in the angle of origin of the components of hamstrings might be one of the reasons for the difference in the incidence and patterns of the injuries of the various muscles of the hamstrings.

Conjoint tendon release for persistent anterior shoulder pain following reverse total shoulder arthroplasty.

BACKGROUND: Persistent anterior shoulder pain is an under-reported complication after reverse total shoulder arthroplasty (RTSA). The purpose of this study was to determine the effectiveness of open conjoint tendon release in patients with anterior shoulder pain due to conjoint tendinitis after RTSA. METHODS: Open conjoint tendon release was performed by the senior author from June 2014 to November 2018 in patients with persistent anterior shoulder pain after RTSA. Patients were evaluated preoperatively and at a minimum of 1 year postoperatively by phone interview with patient-reported outcome scores including a visual analog scale score for pain and the American Shoulder and Elbow Surgeons score. RESULTS: We evaluated 11 of 12 patients (92% follow-up) at a minimum of 1 year (average, 27 ± 11 months) after conjoint tendon release. American Shoulder and Elbow Surgeons and visual analog scale pain scores improved from 29.0 ± 22.1 and 7.3 ± 2.0, respectively, preoperatively to 58.2 ± 30.6 and 3.1 ± 3.5, respectively, postoperatively, after open conjoint tendon release (P = .02 and P = .003, respectively). Of the patients, 45% (5 of 11) reported improvement but with some coracoid pain after the release whereas 55% (6 of 11) reported no coracoid pain after the release. No complications occurred as a result of the release, and no patients required reoperation. CONCLUSION: Our results suggest that conjoint tendinitis may be a cause of persistent postoperative anterior shoulder pain after RTSA and open conjoint tendon release is a successful treatment.

A pilot study of blood supply of the coracoid process and the coracoid bone graft after Latarjet osteotomy.

Latarjet osteotomy is still one of the most reliable and commonly used surgeries in treating recurrent anterior shoulder dislocation. The coracoid process (CP) is the main structure of this surgery. However, the blood supply of CP is not fully understood, and the extent of destruction of blood supply of coracoid bone graft after Latarjet osteotomy procedure is still controversial. Five embalmed cadaveric upper limbs specimens were employed for macro observation of the blood supply of CP. The conjoint tendon (CT) and CP interface were dissected for histology. Sixteen fresh frozen shoulder specimens were used for perfusion and micro CT scanning. Eight specimens were used to present the whole vessel structure of CP. The other eight underwent Latarjet osteotomy procedure. The coracoid bone grafts in both groups were scanned to clarify the remnant blood supply. It was found that the CP was nourished by supra-scapular artery (SSA), thoracic-acromial artery and branch from second portion of the axillary artery (AA). After Latarjet osteotomy procedure, no artery from CT was detected to penetrate the CP at its attachment. Only in one specimen the blood vessel that originated from the CT penetrated the bone graft at the inferior side. Therefore, most of the blood supply was destroyed although there is a subtle possibility that the vessels derived from the CT nourished the inferior side of the CP. In a nutshell, CP is a structure with rich blood supply. The traditional Latarjet osteotomy procedure would inevitably cut off the blood supply of the coracoid bone graft.

The stabilization effect of the conjoint tendon in reverse total shoulder arthroplasty.

BACKGROUND: Numerous factors determine stability of reverse total shoulder arthroplasty. The effect of the conjoint tendon in relation to stability remains unknown. In this biomechanical study, we evaluated the influence of the conjoint tendon on the anterior stability of reverse total shoulder arthroplasty with a hemispherical glenosphere and a glenosphere with 9 mm lateralisation. METHODS: A reverse total shoulder arthroplasty was implanted in 6 human cadaveric shoulders. The anterior stability was evaluated using a shoulder simulator. Two conditions, intact and dissected conjoint tendon, and 2 component configurations, a hemispherical glenosphere and a glenosphere with 9 mm lateralisation, were tested in each specimen. Testing of anterior stability was performed in 30° and 60° of abduction, with 0° and 30° of external rotation in the glenohumeral joint. FINDINGS: The conjoint tendon showed a significant influence on the anterior stability with a hemispherical glenosphere in 30° and 60° with neutral rotation (p = 0.028) as well as 30° abduction with 30° (p = 0.028) external rotation. The 9 mm lateralised glenosphere stabilized significantly reverse total shoulder arthroplasty with resected conjoint tendon compared to the hemispherical glenosphere with resected conjoint tendon (p = 0.028). INTERPRETATION: In a biomechanical setting the conjoint tendon has a stabilizing influence on the anterior stability of the reverse total shoulder arthroplasty with a hemispherical glenosphere in an abducted arm position, but this stabilizing effect was not seen with the lateralised glenosphere. The single influence of the lateralisation of the glenosphere on anterior stability was shown in cases of resected conjoint tendon.

The effect of conjoint tendon release on gait after direct anterior total hip arthroplasty.

INTRODUCTION: There has been considerable interest in the direct anterior (DA) approach to total hip arthroplasty (THA) recently. To facilitate exposure of the proximal femur it is sometimes necessary to release the conjoint tendon. AIM: To prospectively investigate whether release of the conjoint tendon has an impact on gait in the early postoperative period. METHODS: We measured gait velocity, stride length, single-limb support and single-limb support symmetry preoperatively, at discharge from the hospital, and 2, 6 and 12 weeks and postoperatively. Participants also completed the Timed Up and Go and a series of questionnaires (WOMAC, SF-12, Harris Hip Score, and pain VAS) at each visit. RESULTS: 36 participants undergoing a DA THA with a single surgeon were enrolled in this study. 22 participants had a release of the conjoint tendon during their surgery. We found no differences between the groups for any gait, patient-reported or surgical outcomes (p < 0.05). There was a total of 3 complications reported in the release group, and 1 complication in the group that did not have a release. CONCLUSION: Although the conjoint tendon has an important role in the biomechanics of the hip, we found release of the conjoint tendon during the DA approach for THA to have no impact on gait or patient reported outcomes within 12 weeks post-surgery. Therefore, if the exposure of the proximal femur is limited, a low threshold for release of the conjoint tendon is recommended to improve visualisation.

Henle's Ligament: A Comprehensive Review of Its Anatomy and Terminology over Almost One and a Half Centuries.

Henle's ligament was first described by German physician and anatomist, Friedrich Henle, in 1871. This review article will cover Henle's original description of the ligament, historical changes in terminology, embryological studies of the ligament, and the clinical significance of Henle's ligament. This article has a particular focus on the variation in the terminology of this structure and the implications of this.

Soft tissue restrictors of femoral elevation in direct anterior approach-an anatomic study.

BACKGROUND: With the patient in a constant supine position, elevation of the femur in THA (DAA) provides a more intuitive and conducive location of the acetabulum for the correct placement of the acetabular prosthesis, but elevation of the femur for broaching becomes more challenging. The purpose of this study is to analyze the restriction of the ischiofemoral ligament and short external rotation muscles, and its effect on the elevation of the proximal femur in the DAA. METHODS: The study subjects comprised 5 freshly frozen cadavers with 10 normal hips. All of the anatomic dissections of all of the hips were performed through the DAA. The ischiofemoral ligament, piriformis, conjoint tendon, and external obturator were successively resected. All of the proximal femurs of the specimens were levered by a point tip curved retractor that was connected with a dynamometer. Through preliminary measurements, an applied force of 80 N was adopted and maintained on the curved retractor. The experiment was repeated to measure the displacement of the proximal femur being raised after the posterior structures of the hip joint had been resected in a stepwise fashion. The displacement of the retractor was recorded, and the data were then analyzed. RESULTS: The distance significantly increased after the ischiofemoral ligament was severed (P < 0.001). A prominent increase was demonstrated after the conjoint tendons were severed (P < 0.001). The distance insignificantly increased after the piriformis was severed (P > 0.05). After the obturator externus was cut off, the distance increased by an insignificant amount (P > 0.05). CONCLUSION: In DAA, the ischiofemoral ligament contributed stability when the femur was being raised. The main contribution of restriction was provided by the conjoint tendon. The tendons of the obturator externus muscle and piriformis muscle did not provide any significant restriction when the femur was being raised.

Biomechanical Comparison of Screw Fixation Versus a Cortical Button and Self-tensioning Suture for the Latarjet Procedure.

BACKGROUND: Metal screws are traditionally used to fix the coracoid process to the glenoid. Despite stable fixation, metal screws have been associated with hardware complications. Therefore, some studies have advocated for suture button fixation during the Latarjet procedure to reduce the complications associated with screw fixation. PURPOSE: To biomechanically evaluate the ultimate failure load of a cortical button and self-tensioning suture versus metal screws for coracoid graft fixation during the Latarjet procedure. STUDY DESIGN: Controlled laboratory study. METHODS: Eight matched pairs of fresh-frozen, male cadaveric shoulders (N = 16) underwent the Latarjet procedure. The shoulders of each pair were randomly assigned to 1 of 2 groups: fixation using two 3.75-mm cannulated, fully threaded metal screws or fixation using a double suture button construct. Specimens were secured in a dynamic testing machine and cyclically preconditioned from 2 to 10 N at 0.1 Hz for 10 cycles. After preconditioning, specimens were pulled to failure at a normalized displacement rate of 400% of the measured gauge length per minute. The ultimate failure load and mechanism of failure were recorded for each specimen. RESULTS: The mean ultimate load to failure for screw fixation (226 ± 114 N; 95% CI, 147-305 N) was not significantly different from that for suture button fixation (266 ± 73 N; 95% CI, 216-317 N) (P = .257). The mean strain at failure for screw fixation (63% ± 21%; 95% CI, 48%-77%) was not significantly different from that for suture button fixation (86% ± 26%; 95% CI, 69%-104%) (P = .060). The most common mechanism of failure for the screw fixation method was at the bone block drill holes, while an intramuscular rupture at the clamp-muscle interface occurred for the suture button construct. CONCLUSION: The screw and suture button fixation techniques exhibited comparable biomechanical strength for coracoid bone block fixation of the Latarjet procedure. CLINICAL RELEVANCE: Metal screws have been reported to be a large contributor to intraoperative and postoperative complications. Therefore, given the results of the current study, a suture button construct may be an alternative to metal screw fixation during the Latarjet procedure. However, further clinical studies are warranted.

Biomechanical Comparison of Anatomic and Extra-Anatomic Reconstruction Techniques Using Local Grafts for Chronic Instability of the Acromioclavicular Joint.

BACKGROUND: Anatomic reconstruction techniques are increasingly used to address cases of acromioclavicular (AC) joint chronic instability. These usually involve an additional surgical site for autograft harvesting or an allograft. PURPOSE: To describe a triple-bundle (TB) anatomic reconstruction using on-site autografts, the semiconjoint tendon (SCT) and the coracoacromial ligament (CAL), and compare its primary stability to the native AC joint ligamentous complex and to a modified Weaver-Dunn (WD) reconstruction. STUDY DESIGN: Controlled laboratory study. METHODS: Intact AC joints of 12 paired cadaveric shoulders were tested for anterior, posterior, and superior translations under cyclic loading with a servo-hydraulic testing system. One shoulder from each pair was randomly assigned to the TB group, where 2 SCT strips were used to reconstruct the coracoclavicular ligaments while the distal end of the CAL was transferred to the distal extremity of the clavicle to reconstruct the AC ligaments; the other shoulder received a modified WD reconstruction. After reconstruction, the same translational testing was performed, with an additional load-to-failure test in the superior direction. RESULTS: In both the TB and the WD groups, no significant differences were found before and after reconstruction in terms of joint displacements after cyclic loading, in all 3 directions. Compared with the WD reconstruction, the TB repair resulted in significantly lower displacements in both the anterior (ie, 2.59 ± 1.08 mm, P = .011) and posterior (ie, 10.17 ± 6.24 mm, P = .014) directions, but not in the superior direction. No significant differences were observed between the 2 reconstructions during the load-to-failure testing, except for the displacement to failure, which was significantly smaller (ie, 5.34 ± 2.97 mm) in the WD group ( P = .037). CONCLUSION: Anterior, posterior, and superior displacements after an anatomic reconstruction of the AC joint complex using the SCT and CAL as graft material were similar to those of native AC joints and significantly smaller in the axial plane than those of AC joints after a WD repair. CLINICAL RELEVANCE: An anatomic reconstruction is achievable using the CAL and the SCT as on-site graft materials, providing satisfactory initial stability and thereby allowing earlier mobilization.

Preservation of the articular capsule and short lateral rotator in direct anterior approach to total hip arthroplasty.

INTRODUCTION: In total hip arthroplasty via a direct anterior approach, the femur must be elevated at the time of femoral implant placement. For adequate elevation, division of the posterior soft tissues is necessary. However, if we damage and separate the posterior muscle tissue, we lose the benefits of the intermuscular approach. Furthermore, damage to the posterior soft tissue can result in posterior dislocation. We investigate that protecting the posterior soft tissue increases the joint stability in the early postoperative period and results in a lower dislocation rate. METHODS: We evaluated muscle strength recovery by measuring the maximum width of the internal obturator muscle on CT images (GE-Healthcare Discovery CT 750HD). We compared the maximum width of the muscle belly preoperatively versus 10 days and 6 months postoperatively. As clinical evaluations, we also investigated the range of motion of the hip joint, hip joint function based on the Japanese Orthopaedic Association hip score (JOA score), and the dislocation rate 6 months after surgery. RESULTS: The width of the internal obturator muscle increased significantly from 15.1 ± 3.1 mm before surgery to 16.4 ± 2.8 mm 6 months after surgery. The JOA score improved significantly from 50.8 ± 15.1 points to 95.6 ± 7.6 points. No dislocations occurred in this study. CONCLUSIONS: We cut only the posterosuperior articular capsule and protected the internal obturator muscle to preserve muscle strength. We repaired the entire posterosuperior and anterior articular capsule. These treatments increase joint stability in the early postoperative period, thus reducing the dislocation rate. LEVEL OF EVIDENCE: Therapeutic, Level IV.

Optimization of bone-block positioning in the Bristow-Latarjet procedure: a biomechanical study.

BACKGROUND: In the Bristow-Latarjet procedure, optimal positioning of the coracoid bone-block on the anterior aspect of the glenoid (standing or lying on the glenoid rim) remains debated. A biomechanical study assessed the effect of the position of the bone-block with its attached conjoint tendon on anterior and inferior stabilization of the humeral head. MATERIALS AND METHODS: The Bristow-Latarjet procedure was performed on 8 fresh cadaveric shoulders. The bone-block size was systematically at 2.5×1×1 cm. Anterior translation of the humeral head was stress induced under 30-N traction, in maximum external rotation at 0° and at 90° abduction: respectively, adduction and external rotation (ADER), and abduction and external rotation (ABER). Under radiological control, displacement of the center of the humeral head was compared with the glenoid surface at the 3, 4 and 5 o'clock (medial, antero-inferior and inferior) positions for the 2 bone-block positionings. RESULTS: The lying position at 4 o'clock substantially decreased anterior and inferior displacement of the humeral head respectively in ADER and ABER; and in ABER it also tended to decrease anterior translation, but not significantly. The standing bone-block position did not affect translation. CONCLUSIONS: Positioning the bone-block so that it lies on the anterior aspect of the glenoid in the middle of the antero-inferior quarter of the rim at 4 o'clock can decrease anterior displacement of the humeral head and inferior glenohumeral translation, especially in ADER for anterior displacement and in ABER for inferior displacement. STUDY DESIGN: Laboratory study.

Testicular outcome following laparoscopic second stage Fowler-Stephens orchidopexy.

OBJECTIVE: To assess outcome after laparoscopic second-stage Fowler-Stephens orchidopexy (L2(nd)FSO). PATIENTS AND METHODS: Retrospective review of 94 children (aged 0.75-16 years, median 2.75 years), who underwent L2(nd)FSO for 113 intra-abdominal testes between January 2000 and May 2009: 75 unilateral, 19 bilateral (11 synchronous; 8 metachronous). Follow-up (range 3 months-10.9 years, median 2.1 years) was available for 88 children (102 testes: 71 unilateral, 31 bilateral). RESULTS: Testicular atrophy occurred in 9 out of 102 (8.8%), including 8 out of 71 (11.3%) unilateral and 1 out of 31 (3.2%) bilateral intra-abdominal testes (multivariate analysis: p = 0.59). Testicular ascent ensued in 9 out of 102 (8.8%), comprising four (5.6%) unilateral and five (16.1%) bilateral testicles (multivariate analysis: p = 0.11). Of the 18 bilateral testes brought to the scrotum synchronously none atrophied and four (22.2%) ascended, compared to one (7.7%) atrophy and one (7.7%) ascent among the 13 testes brought to the scrotum on separate occasions (Fisher exact test: p = 0.42 and p = 0.37, respectively). Mobilization of the testis through the conjoint tendon tended towards less ascent (multivariate analysis p = 0.08) but similar atrophy (p = 0.56) compared to mobilization through the deep-ring/inguinal canal. Logistical regression analysis identified no other patient or surgical factors influencing outcome. CONCLUSIONS: This is the largest series of L2(nd)FSO to date. A successful outcome is recorded in 85 out of 102 (83.3%) testicles. Atrophy occurred in 8.8% and ascent in 8.8%.