RESUMO
STUDY DESIGN: Systematic Review. OBJECTIVES: To evaluate which cervical deformity correction technique between anterior cervical discectomy and fusion (ACDF) and anterior cervical corpectomy and fusion (ACCF) produces better clinical, radiographic, and operative outcomes. METHODS: We conducted a meta-analysis comparing studies involving ACDF and ACCF. Adult patients with either original or previously treated cervical spine deformities were included. Two independent reviewers categorized extracted data into clinical, radiographic, and operative outcomes, including complications. Clinical assessments included patient-reported outcomes; radiographic evaluations examined C2-C7 Cobb angle, T1 slope, T1-CL, C2-7 SVA, and graft stability. Surgical measures included surgery duration, blood loss, hospital stay, and complications. RESULTS: 26 studies (25727 patients) met inclusion criteria and were extracted. Of these, 14 studies (19077 patients) with low risk of bias were included in meta-analysis. ACDF and ACCF similarly improve clinical outcomes in terms of JOA and NDI, but ACDF is significantly better at achieving lower VAS neck scores. ACDF is also more advantageous for improving cervical lordosis and minimizing the incidence of graft complications. While there is no significant difference between approaches for most surgical complications, ACDF is favorable for reducing operative time, intraoperative blood loss, and length of hospital stay. CONCLUSIONS: While both techniques benefit cervical deformity patients, when both techniques are feasible, ACDF may be superior with respect to VAS neck scores, cervical lordosis, graft complications and certain perioperative outcomes. Further studies are recommended to address outcome variability and refine surgical approach selection.
RESUMO
Background: Brucellosis is a zoonotic disease that can affect various organs, including the spine. Cervical spondylitis caused by Brucella is rare but can lead to significant morbidity if not diagnosed and treated promptly. Case Presentation: We report a case of a 46-year-old female who presented with intermittent high fever and intractable neck, shoulder, and back pain for two months. She was diagnosed with Brucella cervical spondylitis based on clinical manifestations, Rose-Bengal Plate Agglutination Test (RBPT, positive), and cervical MRI findings. She was treated with a combination of antibiotics for at least two weeks, followed by surgical intervention including abscess clearance, partial vertebral resection, and titanium mesh bone fusion. Real-time Polymerase Chain Reaction (RT-PCR) confirmed the presence of sheep Brucella DNA. The patient recovered well postoperatively with significant pain reduction and restoration of full mobility in the right upper limb. Conclusion: This case highlights the diagnostic value of RT-PCR and tissue biopsy in cervical brucellosis spondylitis. Our study found that anterior cervical subtotal corpectomy can restore cervical stability, clear abscess, and relieve spinal cord compression on the basis of drug treatment, with good clinical results.
RESUMO
OBJECTIVES: To optimize cervical vertebral bone quality (C-VBQ) score and explore its effectiveness in predicting cage subsidence in Anterior Cervical Corpectomy and Fusion (ACCF) and identify a new method for evaluating subsidence without different equipment and image scale interference. METHODS: Collecting demographic, imaging, and surgical related information. Measuring Cage Subsidence with a new method. Multifactorial logistic regression was used to identify risk factors associated with subsidence. Pearson's correlation was used to determine the relationship between C-VBQ and computed tomography (CT) Hounsfield units (HU). The receiver operating characteristic (ROC) curve was used to assess C-VBQ predictive ability. Correlations between demographics and C-VBQ scores were analyzed using linear regression models. RESULTS: 92 patients were included in this study, 36 (39.1%) showed subsidence with a C-VBQ value of 2.05 ± 0.45, in the no-subsidence group C-VBQ Value was 3.25 ± 0.76. The multifactorial logistic regression showed that C-VBQ is an independent predictor of cage subsidence with a predictive accuracy of 93.4%. Pearson's correlation analysis showed a negative correlation between C-VBQ and HU values. Linear regression analysis showed a positive correlation between C-VBQ and cage subsidence. Univariate analyses showed that only age was associated with C-VBQ. CONCLUSIONS: The C-VBQ values obtained using the new measurements independently predicted postoperative cage subsidence after ACCF and showed a negative correlation with HU values. By adding the measurement of non-operated vertebral heights as a control standard, the results of cage subsidence measured by the ratio method are likely to be more robust, perhaps can exclude unavoidable errors caused by different equipment and proportional.
Assuntos
Vértebras Cervicais , Fusão Vertebral , Humanos , Vértebras Cervicais/cirurgia , Vértebras Cervicais/diagnóstico por imagem , Masculino , Fusão Vertebral/instrumentação , Fusão Vertebral/efeitos adversos , Feminino , Pessoa de Meia-Idade , Idoso , Adulto , Estudos Retrospectivos , Tomografia Computadorizada por Raios X , Valor Preditivo dos Testes , Densidade Óssea , Fatores de Risco , Complicações Pós-Operatórias/etiologia , Complicações Pós-Operatórias/diagnósticoRESUMO
STUDY DESIGN: A retrospective machine learning (ML) classification study for prognostic modeling after anterior cervical corpectomy (ACC). PURPOSE: To evaluate the effectiveness of ML in predicting ACC outcomes and develop an accessible, user-friendly tool for this purpose. OVERVIEW OF LITERATURE: Based on our literature review, no study has examined the capability of ML algorithms to predict major shortterm ACC outcomes, such as prolonged length of hospital stay (LOS), non-home discharge, and major complications. METHODS: The American College of Surgeons' National Surgical Quality Improvement Program database was used to identify patients who underwent ACC. Prolonged LOS, non-home discharges, and major complications were assessed as the outcomes of interest. ML models were developed with the TabPFN algorithm and integrated into an open-access website to predict these outcomes. RESULTS: The models for predicting prolonged LOS, non-home discharges, and major complications demonstrated mean areas under the receiver operating characteristic curve (AUROC) of 0.802, 0.816, and 0.702, respectively. These findings highlight the discriminatory capacities of the models: fair (AUROC >0.7) for differentiating patients with major complications from those without, and good (AUROC >0.8) for distinguishing between those with and without prolonged LOS and non-home discharges. According to the SHapley Additive Explanations analysis, single- versus multiple-level surgery, age, body mass index, preoperative hematocrit, and American Society of Anesthesiologists physical status repetitively emerged as the most important variables for each outcome. CONCLUSIONS: This study has considerably enhanced the prediction of postoperative results after ACC surgery by implementing advanced ML techniques. A major contribution is the creation of an accessible web application, highlighting the practical value of the developed models. Our findings imply that ML can serve as an invaluable supplementary tool to stratify patient risk for this procedure and can predict diverse postoperative adverse outcomes.
RESUMO
BACKGROUND: The aim of this study is to introduce a novel nanohydroxyapatite/polyamide 66(n-HA/PA66)n strut to improve biomechanical performance and reduce subsidence. METHODS: One validated intact and 2 ACCF-simulated C3-C7 cervical spine models were developed (old strut: Group A, new strut: Group B). In the ACCF models, C5 underwent corpectomy and was fixed by an anterior cervical plate. Screw angles were categorized as 1 (0 ) and 2 (45 ) and divided into 4 groups, A1, A2, B1 and B2, for each model. An axial force of 74 N and a moment couple of 1.0 Nm were imposed on the C3 vertebra. The range of motion (ROM) of each segment and the stress distribution on the screw-vertebra interface, strut, and strut-endplate interface were recorded and analysed. RESULTS: There was no significant difference in ROM between Group A and Group B during bending, extension and rotation under 74 N axial pressure. The stress concentration on the strut body in Group A was higher than that in Group B. The peak stress values at the screw-vertebral interface in Groups A1 and A2 were higher than those in Groups B1 and B2, except for during extension and lateral bending. Under axial pressure, the peak stress values at the strut body-endplate interface during bending, extension and rotation were lower in the A1 and A2 groups than in the B1 and B2 groups. The Group B model showed much higher graft stress than the Group A model. CONCLUSIONS: Based on finite-element analysis, compared with the old strut, the novel strut showed better biomechanical performance at the screw-vertebra interface.
Assuntos
Vértebras Cervicais , Durapatita , Análise de Elementos Finitos , Nylons , Fusão Vertebral , Vértebras Cervicais/cirurgia , Humanos , Fusão Vertebral/métodos , Fusão Vertebral/instrumentação , Fenômenos Biomecânicos , Amplitude de Movimento Articular , Parafusos ÓsseosRESUMO
BACKGROUND CONTEXT: Osteolytic lesions caused by infection or metastatic disease of the spine can induce instability. Different surgical strategies are available to restore stability in this scenario, however little is known how various reconstruction techniques affect spinal biomechanics. PURPOSE: To analyze and quantify the biomechanical effects of three different surgical reconstruction techniques in the treatment of a T12 osteolytic model. STUDY DESIGN/SETTING: Finite element analysis of the thoracic spine with a T12 osteolytic lesion. METHODS: Using CT scans from a 20-year-old man without structural deformity, simulation of an osteolytic lesion with a 50% defect at the posterior aspect of T12 vertebral body was created by a 490 N vertical force to T9. Next, three common instrumentation techniques treating the osteolytic lesion were modeled and biomechanically tested. These included: Model A, corpectomy with short segment fixation (T11-L1) and two long-segment instrumentations; Model B long segment fixation with triple rod construct; Model C long segment fixation with dual rod construct. A load of 480N was then applied on the spine models in vertically downward direction on T9. Von Mises stresses were measured (MPa) in the discs, vertebrae, and implants. RESULTS: Model A demonstrated the lowest stress on construct material, adjacent vertebral bodies, and discs but increased stress on the instrumented vertebrae. Model B was more rigid and demonstrated lower construct stress compared to Model C. However, Model C had the lowest vertebral body stress in flexion, extension, and lateral bending in the most upper instrumented vertebral body, but the highest screw pull-out stress when compared to Model A and Model B. CONCLUSIONS: This osteolytic T12 model provides unique biomechanical data that can help to tailor surgical strategies in select scenarios. While optimal outcomes are best achieved with a construct tailored to a specific patient's need for stabilization, our findings can be generalized for instances of cancerous lesions, low bone density, and infectious causes. CLINICAL RELEVANCE: The results of this study can help with the choice of appropriate surgical reconstruction technique based on patient-specific characteristics.
RESUMO
BACKGROUND: Management of anterior cervical corpectomy and fusion (ACCF)-derived adjacent segment disease (ASD) represented a challenge facing the surgeons. METHODS: A 41-year man diagnosed as C3-4 level ASD derived from C5-level ACCF surgery 13 years ago was admitted to the hospital for numbness and pain in the right shoulder and upper limb. Percutaneous full-endoscopic anterior transcorporeal cervical discectomy (PEATCD) was performed, and pre- and postoperative clinical and imaging data were collected. RESULTS: The operation was completed within 70 min, and no clinical or radiological complication was reported. The visual analog scale (VAS) score decreased from preoperative 5 points to postoperative 1 point. Numbness was relieved postoperatively and disappeared completely at postoperative 3 months. Imaging data indicated sufficient spinal cord decompression, good channel repairing and cervical alignment. CONCLUSIONS: Channel-repairing PEATCD was successfully performed to treat ACCF-derived ASD, nevertheless, the long-term efficacy remained tracing and further clinical trials were needed to validate its efficacy.
Assuntos
Vértebras Cervicais , Fusão Vertebral , Humanos , Masculino , Vértebras Cervicais/cirurgia , Vértebras Cervicais/diagnóstico por imagem , Fusão Vertebral/métodos , Fusão Vertebral/efeitos adversos , Adulto , Endoscopia/métodos , Discotomia Percutânea/métodos , Resultado do Tratamento , Discotomia/métodosRESUMO
INTRODUCTION: Anterior Cervical Discectomy and Fusion (ACDF) and Anterior Cervical Corpectomy and Fusion (ACCF) are both common surgical procedures in the management of pathologies of the subaxial cervical spine. While recent reviews have demonstrated ACCF to provide better decompression results compared to ACDF, the procedure has been associated with increased surgical risks. Nonetheless, the use of ACCF in a traumatic context has been poorly described. The aim of this study was to assess the safety of ACCF as compared to the more commonly performed ACDF. METHODS: All patients undergoing ACCF or ACDF for subaxial cervical spine injuries spanning over 2 disc-spaces and 3 vertebral-levels, between 2006 and 2018, at the study center, were eligible for inclusion. Patients were matched based on age and preoperative ASIA score. RESULTS: After matching, 60 patients were included in the matched analysis, where 30 underwent ACDF and ACCF, respectively. Vertebral body injury was significantly more common in the ACCF group (p = 0.002), while traumatic disc rupture was more frequent in the ACDF group (p = 0.032). There were no statistically significant differences in the rates of surgical complications, including implant failure, wound infection, dysphagia, CSF leakage between the groups (p ≥ 0.05). The rates of revision surgeries (p > 0.999), mortality (p = 0.222), and long-term ASIA scores (p = 0.081) were also similar. CONCLUSION: Results of both unmatched and matched analyses indicate that ACCF has comparable outcomes and no additional risks compared to ACDF. It is thus a safe approach and should be considered for patients with extensive anterior column injury.
Assuntos
Vértebras Cervicais , Discotomia , Complicações Pós-Operatórias , Fusão Vertebral , Traumatismos da Coluna Vertebral , Humanos , Fusão Vertebral/métodos , Fusão Vertebral/efeitos adversos , Vértebras Cervicais/cirurgia , Vértebras Cervicais/lesões , Masculino , Feminino , Pessoa de Meia-Idade , Discotomia/métodos , Discotomia/efeitos adversos , Adulto , Complicações Pós-Operatórias/epidemiologia , Complicações Pós-Operatórias/etiologia , Traumatismos da Coluna Vertebral/cirurgia , Idoso , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Introduction: Infective spondylodiscitis, resulting from bacterial or fungal infections in intervertebral discs and adjacent vertebral bodies, poses diagnostic dilemmas due to its rare occurrence and subtle symptomatology. This report underscores the importance of a multidisciplinary approach in navigating the complexities of infective spondylodiscitis, particularly in patients with concomitant chronic kidney disease (CKD). Case Report: A 53-year-old male, 5 years into renal dialysis for CKD, presented with a 3-month history of severe neck pain radiating to both arms, accompanied by tingling sensations. Neurological evaluation revealed weakness and gait imbalance. Laboratory findings indicated elevated serum creatinine, erythrocyte sedimentation rate, and C-reactive protein. Imaging confirmed vertebral destruction, necessitating a staged treatment plan involving surgical intervention, corpectomy, mesh placement, and fusion. Intraoperative cultures yielded negative results, prompting continued broad-spectrum antibiotic therapy intravenously for 2 weeks, followed by an additional 4 weeks orally. Discussion: The case discussion explores common risk factors for infective spondylodiscitis, emphasizing the need for a comprehensive diagnostic approach in patients with immunocompromised conditions, such as CKD. Despite negative cultures, the patient's favorable clinical response and neurological recovery underscore the intricate nature of infectious processes, especially in individuals with underlying health concerns. Conclusion: This case report serves as a poignant reminder of the challenges associated with infective spondylodiscitis in CKD patients on hemodialysis. The classic triad of pain, fever, and neurological deficits should trigger a thorough diagnostic investigation, leveraging advanced imaging techniques for accurate diagnosis. A multidisciplinary approach and regular follow-ups are essential in managing such complex cases, contributing to improved patient outcomes and overall healthcare quality.
RESUMO
BACKGROUND: Chylous fluid leakage following spinal surgery is a rare and potentially difficult-to-manage complication that can lead to wound complications, pain, or nutritional deficiencies. Although the thoracic duct is localized near the thoracic spine, reports of thoracic duct injuries secondary to posterior thoracic spine surgery are rare. OBSERVATIONS: The authors present the case of a 57-year-old male with a known history of metastatic renal cell carcinoma to the thoracic spine who had undergone a thoracolumbar fusion with thoracic corpectomy and presented with concern for a chyle leak almost a year after his surgery. The patient had a complicated oncological history and underwent decompression and fusion to treat his significant thoracic metastatic disease. A year later, he presented with back pain and a significant fluid collection at the surgical site, which was drained and found to be consistent with chyle. The patient was treated conservatively, and imaging of the thoracic duct a few months later demonstrated no direct injury, likely indicating either transient injury or potential obstruction of the thoracic duct from metastatic disease. LESSONS: This case demonstrates a rare, potential complication when treating extensive thoracic metastatic disease as well as the workup and potential treatments when facing thoracic duct injury. https://thejns.org/doi/10.3171/CASE24280.
RESUMO
Together, lower back and neck pain are among the leading causes of acquired disability worldwide and have experienced a marked increase over the past 25 years. Paralleled with the increasing aging population and the rise in chronic disease, this trend is only predicted to contribute to the growing global burden. In the context of cervical neck pain, this symptom is most often a manifestation of cervical degenerative disc disease (DDD). Traditionally, multilevel neck pain related to DDD that is recalcitrant to both physical and medical therapy can be treated with a procedure known as cervical corpectomy. Presently, there are many flavors of cervical corpectomy; however, the overarching goal is the removal of the pain-generating disc via the employment of the modern anterior approach. In this review, we will briefly detail the pathophysiological mechanism behind DDD, overview the development of the anterior approach, and discuss the current state of treatment options for said pathology. Furthermore, this review will also add to the current body of literature surrounding updated indications, surgical techniques, and patient outcomes related to cervical corpectomy. Finally, our discussion ends with highlighting the future direction of cervical corpectomy through the introduction of the "skip corpectomy" and distractable mesh cages.
RESUMO
Introduction: Vertebral body osteochondroma presenting with myelopathic symptoms is exceptionally rare entity of spinal osteochondroma which arises from the posterior surface of vertebral body and leading to spinal canal stenosis and cord compression. Early definitive diagnosis and subsequent successful treatment is necessary in such cases to prevent life threatening complications. Case Report: In this context, we report a case of a 20-years old female presented with mechanical neck pain, unsteady gait, giddiness with neurological deficit for the past 3 months. An MRI of the cervical spine revealed a mass growing from the posterior aspect of the C6 vertebral body and extending toward the vertebral canal, causing marked spinal cord compression. Conclusion: The following case report not only describes the rare presentations of vertebral body osteochondroma but also emphasizes on surgical management by en bloc resection of tumor and anterior cervical fusion, resulting in a favorable outcome without any recurrence.
RESUMO
INTRODUCTION AND IMPORTANCE: Tuberculosis is a bacterial infection caused by Mycobacterium tuberculosis, primarily affecting the lungs. Conversely, the incidence of spinal tuberculosis (TB) was limited to a mere 6 % of cases of extrapulmonary tuberculosis. Upper cervical spinal TB is an exceptionally uncommon condition, with an incidence rate of approximately 0.3-1 % among all cases of spinal tuberculosis. CASE DESCRIPTION: Three patients diagnosed with upper cervical spinal tuberculosis who underwent Anterior Cervical Corpectomy Fusion (ACCF) or Occipitocervical fusion surgery were reviewed retrospectively. The data was obtained during the pandemic period in Indonesia. The patients were evaluated using pre-operative and post-operative Cobb's angles, Visual Analog Scale (VAS), Frankel scale, and Neck Pain and Disability (NPAD) scale. CLINICAL DISCUSSION: The ACCF surgery was more favourable when the compression was extended to the vertebral body; it showed good clinical and radiological outcomes. Multilevel ACCF and pathologies affecting bone quality seemed to be risk factors for material subsidence and instability. In this case, all the patients had performed ACCF surgery. The mean Cobb's angle pre-operative was 15.30, and Cobb's angle post-operative was 6.50. The mean pre-operative VAS value was 6.3, and the post-operative VAS value was 3. Compared to the post-operative scale, the pre-operative Frankel scale experienced an average increase of 2 levels. In contrast, the mean value of good post-operative NPAD is 29.3. CONCLUSION: Operative procedures on upper cervical spinal tuberculosis cases can improve patient's quality of life significantly, clinically and radiologically.
RESUMO
This case report describes the presentation, diagnosis, and surgical management of a 61-year-old female admitted to a tertiary care hospital with a two-month history of neck pain and weakness in all four limbs. Despite the absence of a clear history of trauma, a detailed examination revealed restricted neck flexion, paraspinal muscle spasm, and neurological deficits. Contrast-enhanced MRI indicated vertebral osteomyelitis and discitis at the C5-C6 level, with a suspected infective etiology, possibly tuberculosis spondylitis. The patient underwent anterior cervical decompression, corpectomy of C5-C6, and fusion of C4-C7. Postoperative management included intravenous antibiotics, physiotherapy, and anti-tubercular treatment. The patient exhibited satisfactory recovery, and this case underscores the importance of comprehensive evaluation and prompt intervention in managing complex spinal infections.
RESUMO
Background and objective: Our group has developed a novel artificial cervical joint complex (ACJC) as a motion preservation instrument for cervical corpectomy procedures. Through finite element analysis (FEA), this study aims to assess this prosthesis's mobility and stability in the context of physiological reconstruction of the cervical spine. Materials and methods: A finite element (FE)model of the subaxial cervical spine (C3-C7) was established and validated. ACJC arthroplasty, anterior cervical corpectomy and fusion (ACCF), and two-level cervical disc arthroplasty (CDA) were performed at C4-C6. Range of motion (ROM), intervertebral disc pressure (IDP), facet joint stress (FJS), and maximum von Mises stress on the prosthesis and vertebrae during loading were compared. Results: Compared to the intact model, the ROM in all three surgical groups demonstrated a decline, with the ACCF group exhibiting the most significant mobility loss, and the highest compensatory motion in adjacent segments. ACJC and artificial cervical disc prosthesis (ACDP) well-preserved cervical mobility. In the ACCF model, IDP and FJS in adjacent segments increased notably, whereas the index segments experienced the most significant FJS elevation in the CDA model. The ROM, IDP, and FJS in both index and adjacent segments of the ACJC model were intermediate between the other two. Stress distribution of ACCF instruments and ACJC prosthesis during the loading process was more dispersed, resulting in less impact on the adjacent vertebrae than in the CDA model. Conclusion: The biomechanical properties of the novel ACJC were comparable to the ACCF in constructing postoperative stability and equally preserved physiological mobility of the cervical spine as CDA without much impact on adjacent segments and facet joints. Thus, the novel ACJC effectively balanced postoperative stability with cervical motion preservation.
RESUMO
Objective: To evaluate the safety and effectiveness of applying self-stabilizing zero-profile three-dimensional (3D) printed artificial vertebral bodies in anterior cervical corpectomy and fusion (ACCF) for cervical spondylotic myelopathy. Methods: A retrospective analysis was conducted on 37 patients diagnosed with cervical spondylotic myelopathy who underwent single-level ACCF using either self-stabilizing zero-profile 3D-printed artificial vertebral bodies ( n=15, treatment group) or conventional 3D-printed artificial vertebral bodies with titanium plates ( n=22, control group) between January 2022 and February 2023. There was no significant difference in age, gender, lesion segment, disease duration, and preoperative Japanese Orthopedic Association (JOA) score between the two groups ( P>0.05). Operation time, intraoperative bleeding volume, hospitalization costs, JOA score and improvement rate, incidence of postoperative prosthesis subsidence, and interbody fusion were recorded and compared between the two groups. Results: Compared with the control group, the treatment group had significantly shorter operation time and lower hospitalization costs ( P<0.05); there was no significant difference in intraoperative bleeding volume between the two groups ( P>0.05). All patients were followed up, with a follow-up period of 6-21 months in the treatment group (mean, 13.7 months) and 6-19 months in the control group (mean, 12.7 months). No dysphagia occurred in the treatment group, while 5 cases occurred in the control group, with a significant difference in the incidence of dysphagia between the two groups ( P<0.05). At 12 months after operation, both groups showed improvement in JOA scores compared to preoperative scores, with significant differences ( P<0.05); however, there was no significant difference in the JOA scores and improvement rate between the two groups ( P>0.05). Radiographic examinations showed the interbody fusion in both groups, and the difference in the time of interbody fusion was not significant ( P>0.05). At last follow-up, 2 cases in the treatment group and 3 cases in the control group experienced prosthesis subsidence, with no significant difference in the incidence of prosthesis subsidence ( P>0.05). There was no implant displacement or plate-screw fracture during follow-up. Conclusion: The use of self-stabilizing zero-profile 3D-printed artificial vertebral bodies in the treatment of cervical spondylotic myelopathy not only achieves similar effectiveness to 3D-printed artificial vertebral bodies, but also reduces operation time and the incidence of postoperative dysphagia.
Assuntos
Vértebras Cervicais , Descompressão Cirúrgica , Impressão Tridimensional , Fusão Vertebral , Espondilose , Humanos , Espondilose/cirurgia , Vértebras Cervicais/cirurgia , Estudos Retrospectivos , Fusão Vertebral/métodos , Fusão Vertebral/instrumentação , Masculino , Descompressão Cirúrgica/métodos , Feminino , Resultado do Tratamento , Placas Ósseas , Corpo Vertebral/cirurgia , Doenças da Medula Espinal/cirurgia , Pessoa de Meia-IdadeRESUMO
Objective: To evaluate the effectiveness of using titanium alloy trabecular bone three-dimensional (3D) printed artificial vertebral body in treating cervical ossification of the posterior longitudinal ligament (OPLL). Methods: A retrospective analysis was conducted on clinical data from 45 patients with cervical OPLL admitted between September 2019 and August 2021 and meeting the selection criteria. All patients underwent anterior cervical corpectomy and decompression, interbody bone graft fusion, and titanium plate internal fixation. During operation, 21 patients in the study group received titanium alloy trabecular bone 3D printed artificial vertebral bodies, while 24 patients in the control group received titanium cages. There was no significant difference in baseline data such as gender, age, disease duration, affected segments, or preoperative pain visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), vertebral height, and C 2-7Cobb angle ( P>0.05). Operation time, intraoperative blood loss, and occurrence of complications were recorded for both groups. Preoperatively and at 3 and 12 months postoperatively, the functionality and symptom relief were assessed using JOA scores, VAS scores, and NDI evaluations. The vertebral height and C 2-7 Cobb angle were detected by imaging examinations and the implant subsidence and intervertebral fusion were observed. Results: The operation time and incidence of complications were significantly lower in the study group than in the control group ( P<0.05), while the difference in intraoperative blood loss between the two groups was not significant ( P>0.05). All patients were followed up 12-18 months, with the follow-up time of (14.28±4.34) months in the study group and (15.23±3.54) months in the control group, showing no significant difference ( t=0.809, P=0.423). The JOA score, VAS score, and NDI of the two groups improved after operation, and further improved at 12 months compared to 3 months, with significant differences ( P<0.05). At each time point, the study group exhibited significantly higher JOA scores and improvement rate compared to the control group ( P<0.05); but there was no significantly difference in VAS score and NDI between the two groups ( P>0.05). Imaging re-examination showed that the vertebral height and C 2-7Cobb angle of the two groups significantly increased at 3 and 12 months after operation ( P<0.05), and there was no significant difference between 3 and 12 months after operation ( P>0.05). At each time point, the vertebral height and C 2-7Cobb angle of the study group were significantly higher than those of the control group ( P<0.05), and the implant subsidence rate was significantly lower than that of the control group ( P<0.05). However, there was no significant difference in intervertebral fusion rate between the two groups ( P>0.05). Conclusion: Compared to traditional titanium cages, the use of titanium alloy trabecular bone 3D-printed artificial vertebral bodies for treating cervical OPLL results in shorter operative time, fewer postoperative complications, and lower implant subsidence rates, making it superior in vertebral reconstruction.
Assuntos
Ligas , Vértebras Cervicais , Ossificação do Ligamento Longitudinal Posterior , Impressão Tridimensional , Fusão Vertebral , Titânio , Humanos , Ossificação do Ligamento Longitudinal Posterior/cirurgia , Vértebras Cervicais/cirurgia , Estudos Retrospectivos , Fusão Vertebral/métodos , Fusão Vertebral/instrumentação , Descompressão Cirúrgica/métodos , Osso Esponjoso , Resultado do Tratamento , Corpo Vertebral/cirurgia , Feminino , Masculino , Placas Ósseas , Pessoa de Meia-IdadeRESUMO
OBJECTIVE: Both two-level anterior cervical corpectomy and fusion (t-ACCF) and posterior open-door laminoplasty (ODLP) are effective surgical procedures for the treatment of ossification of the posterior longitudinal ligament (OPLL). Previous studies have identified different effects of different surgical procedures on the upper and subaxial cervical spine (UCS, SCS), however, there are no studies on the effects of t-ACCF and ODLP on the occipito-atlantoaxial complex. Therefore, the purpose of this study is to compare the changes in sagittal parameters and range of motion (ROM) of the occipito-atlantoaxial complex in OPLL patients treated with t-ACCF and ODLP. METHODS: This was a retrospective study that included 74 patients who underwent t-ACCF or ODLP for the treatment of OPLL from January 2012 to August 2022 at our institution. Preoperative, 3-month, and 1-year postoperative cervical neutral, flexion-extension, and lateral flexion radiographs were taken. Sagittal parameters including Cobb angle of C2-7, C0-2, C0-1, C1-2, C2 slope, and the ROM were measured. The clinical outcome was assessed using the JOA, VAS, and NDI scores preoperatively and at 3 and 12 months postoperatively. Multiple linear regression was employed to identify factors influencing changes in UCS. RESULTS: In the ODLP group, the SCS (C2-7) Cobb angle was significantly reduced (12.85 ± 10.0 to 7.68 ± 11.27; p < 0.05), and the UCS (C0-2) Cobb angle was significantly compensated for at 1 year postoperatively compared with the t-ACCF group (3.05 ± 4.09 vs 0.79 ± 2.62; p < 0.01). The SCS and lateral flexion ROM of the ODLP group was better maintained than t-ACCF (14.51 ± 6.00 vs 10.72 ± 3.79; 6.87 ± 4.56 vs 3.81 ± 1.67; p < 0.01). The compensatory increase in C0-2, C0-1, and C1-2 ROM was pronounced in both groups, especially in the ODLP group. The results of multiple linear regression showed that only the surgical procedure was a significant factor influencing UCS. CONCLUSION: The loss of the SCS Cobb angle was more pronounced in ODLP relative to t-ACCF, resulting in a significant compensatory increase in UCS and atlantoaxial Cobb angle. The ROM of the UCS, atlantooccipital, and atlantoaxial joints was significantly increased in both groups, this may accelerate degenerative changes in the occipital-atlantoaxial complex, may leading to poorer outcomes in the long-term; of these, ODLP should receive more attention. In contrast, t-ACCF better maintains normal curvature of the SCS and occipito-atlantoaxial complex but loses more ROM.
Assuntos
Vértebras Cervicais , Laminoplastia , Ossificação do Ligamento Longitudinal Posterior , Amplitude de Movimento Articular , Fusão Vertebral , Humanos , Ossificação do Ligamento Longitudinal Posterior/cirurgia , Masculino , Estudos Retrospectivos , Feminino , Pessoa de Meia-Idade , Laminoplastia/métodos , Fusão Vertebral/métodos , Vértebras Cervicais/cirurgia , Vértebras Cervicais/diagnóstico por imagem , Idoso , Adulto , Articulação Atlantoaxial/cirurgiaRESUMO
Background: Radiation therapy (RT) performed before anterior cervical spine surgery (ACSS) may cause fascial plane fibrosis, decreased soft-tissue vascularity, and vertebral body weakness, which could increase the risk of esophageal and major vessel injuries, wound complications, and construct subsidence. Therefore, this study aimed to evaluate whether preoperative RT performed for metastatic spine cancer (MSC) at the cervical spine increases perioperative morbidity for ACSS. Methods: Forty-nine patients who underwent ACSS for treatment of MSC at the cervical spine were retrospectively reviewed. All the patients underwent anterior cervical corpectomy via the anterior approach. Patient demographics, surgical factors, operative factors, and complications were recorded. Results of patients who were initially treated with RT before ACSS (RT group) were compared with those who did not receive RT before ACSS (non-RT group). Results: Eighteen patients (36.7%) were included in the RT group, while the remaining 31 (63.3%) were included in the non-RT group. Surgery-related factors, including operation time (p = 0.109), estimated blood loss (p = 0.246), amount of postoperative drainage (p = 0.604), number of levels operated (p = 0.207), and number of patients who underwent combined posterior fusion (p = 0.768), did not significantly differ between the 2 groups. Complication rates, including esophageal injury, dural tear, infection, wound dehiscence, and mechanical failure, did not significantly differ between the RT and non-RT groups. Early subsidence was significantly greater in the non-RT group compared to that in the RT group (p = 0.012). Conclusions: RT performed before surgery for MSC does not increase the risk of wound complication, mechanical failure, or vital structure injury during ACSS. The surgical procedural approach was not complicated by previous RT history. Therefore, surgeons can safely choose the anterior approach when the number of levels or location of MSC favors anterior surgery, and performing a posterior surgery is unnecessary due to a concern that previous RT may increase complication rates of ACSS.
Assuntos
Neoplasias Ósseas , Fusão Vertebral , Humanos , Estudos Retrospectivos , Vértebras Cervicais/cirurgia , Complicações Pós-Operatórias/epidemiologia , Complicações Pós-Operatórias/etiologia , Fusão Vertebral/métodosRESUMO
Background: Currently, in the specialized literature there are no substantiated clinical and radiological indications for differentiated use of anterior cervical discectomy and fusion (ACDF) and anterior cervical corpectomy and fusion (ACCF) in the treatment of patients with two-segmental cervical degenerative diseases. The objectives of this study were to (I) identify risk factors that were associated with unsatisfactory results of two-level ACDF and one-level ACCF in the treatment of patients with cervical degenerative diseases despite current perioperative management, and (II) develop a clinical and radiological algorithm for personalized surgical tactics. Methods: We retrospectively identified risk factors for the development of unsatisfactory clinical postoperative results after two-level ACDF (n=81) and one-level ACCF (n=78), operated in the period of 2009-2019 for two-segmental cervical degenerative disease. Results: Satisfactory clinical results after two-level ACDF were noted in cases with total kyphotic deformity of less than 15°; local kyphotic deformity less than 10Ë; the absence of circumferential spondylotic cervical stenosis; the absence of a myelopathic lesion at the level of the vertebral body; absence of migrating intervertebral disk (IVD) hernia more than 1/3 of the vertebral body; T1 slope vertebra less than 15°; IVD degeneration according to Suzuki A. 0-II; facet joint (FJ) degeneration according to Okamoto A. I-III; interbody height (IH) more than 2 mm. Satisfactory clinical results after single-level ACCF were registered in cases with IVD degeneration according to Suzuki A. III; FJ degeneration according to Okamoto A. IV-V; IH 3 mm or less; regardless of the cervical lordosis, the angle of local kyphotic deformity and T1 slope, the presence of circumferential spondylotic cervical stenosis, the localization of the myelopathic lesion and the distance of migration IVD herniation. Conclusions: Individual planning and differentiated implementation of ACDF and ACCF in patients with two-segmental cervical degenerative disease, taking into account a comprehensive preoperative clinical and radiological assessment, contributes to the effective elimination of existing neurological symptoms, reducing the intensity of neck pain and upper limbs pain, restoring the functional state and quality of patients' lives in the minimum 24 months postoperative period, as well as reducing the number of postoperative complications and reoperations.