Black stain and dental caries in primary dentition of preschool children in Qingdao, China.

Black stain (BS) and caries are common oral issues in children worldwide. This study aimed to reveal the prevalence of BS and caries in primary dentition of children in Qingdao, China and evaluate the potential association between them. A total of 672 preschool children aged 3-5 years old from 12 kindergartens in Qingdao, northern China were enrolled in the study. The prevalences of BS and caries were counted, and their distributions across different ages and genders were analyzed. The potential protective role of BS (independent variable) on caries (dependent variable) was analyzed via binary logistic regression analysis. BS was observed in 103 children (15.33%), including 3 severe- (0.45%), 28 moderate- (4.17%), and 72 mild (10.71%) forms. Caries was observed in 374 children (55.65%) and it was positively associated with age. Notably, the prevalence of caries was lower in children with BS than in those without BS (42.72% vs. 58.00%, respectively). Children with BS were less likely to suffer from caries than those without BS. BS in mild or moderate/severe forms was associated with a low risk of caries. In summary, the prevalence of BS in primary dentition in Qingdao, China is at a relatively high level worldwide. BS is a protective factor for caries in primary dentition.

Multivariate analysis of craniodental morphology in mouse-eared bats (Chiroptera, Vespertilionidae, Myotis) from Vietnam.

This study conducted biostatistical multivariate analyses on 23 craniodental morphological measurements from 209 specimens to study interspecific variations amongst 15 bat species of the genus Myotis in Vietnam. Univariate and multivariate analyses demonstrated that the studied species can be divided into four groups as follows: extra-large-sized species (M.chinensis), large-sized species (M.pilosus, M.indochinensis and M.annectans), medium-sized species (M.altarium, M.hasseltii, M.montivagus, M.horsfieldii, M.ater, M.laniger and M.muricola) and small-sized species (M.annamiticus, M.aff.siligorensis, M.rosseti and M.alticraniatus). Our data revealed that the main craniodental features contributing to the variations in distinguishing Myotis species are the width of the anterior palatal, least height of the coronoid process, length of the upper and lower canine-premolar, zygomatic width and width across the upper canines and lower premolar-molar length. Based on patterns of morphological differences, we conducted comparisons between morphometrically closely resembling species pairs and further discussed additional characteristics that are expected to support the taxonomy and systematics of Vietnamese Myotis bats.

Convolutional neural network for automated tooth segmentation on intraoral scans.

BACKGROUND: Tooth segmentation on intraoral scanned (IOS) data is a prerequisite for clinical applications in digital workflows. Current state-of-the-art methods lack the robustness to handle variability in dental conditions. This study aims to propose and evaluate the performance of a convolutional neural network (CNN) model for automatic tooth segmentation on IOS images. METHODS: A dataset of 761 IOS images (380 upper jaws, 381 lower jaws) was acquired using an intraoral scanner. The inclusion criteria included a full set of permanent teeth, teeth with orthodontic brackets, and partially edentulous dentition. A multi-step 3D U-Net pipeline was designed for automated tooth segmentation on IOS images. The model's performance was assessed in terms of time and accuracy. Additionally, the model was deployed on an online cloud-based platform, where a separate subsample of 18 IOS images was used to test the clinical applicability of the model by comparing three modes of segmentation: automated artificial intelligence-driven (A-AI), refined (R-AI), and semi-automatic (SA) segmentation. RESULTS: The average time for automated segmentation was 31.7 ± 8.1 s per jaw. The CNN model achieved an Intersection over Union (IoU) score of 91%, with the full set of teeth achieving the highest performance and the partially edentulous group scoring the lowest. In terms of clinical applicability, SA took an average of 860.4 s per case, whereas R-AI showed a 2.6-fold decrease in time (328.5 s). Furthermore, R-AI offered higher performance and reliability compared to SA, regardless of the dentition group. CONCLUSIONS: The 3D U-Net pipeline was accurate, efficient, and consistent for automatic tooth segmentation on IOS images. The online cloud-based platform could serve as a viable alternative for IOS segmentation.

Systematic review and meta-analysis on prevalence and anamnestic risk factors for erosive tooth wear in the primary dentition.

BACKGROUND: Erosive tooth wear is a multifactorial and common condition in children. AIM: This systematic review and meta-analysis aimed to determine the prevalence and key risk factors for erosive tooth wear in the primary dentition of children up to 7 years of age. DESIGN: Electronic databases (PubMed, Embase, Scopus, and Web of Science) were searched in February 2023 for observational studies reporting prevalence and anamnestic risk factors. Additionally, a manual hand search was performed. Meta-analyses were conducted for the prevalence and odds ratios of identified risk factors. Risk of bias was assessed using the Newcastle-Ottawa scale modified for cross-sectional studies. RESULTS: A total of 26 sources, reporting on 23 studies, were included in the systematic review. The overall estimated prevalence of children with erosive tooth wear in the primary dentition amounted to 35.6% (95% CI: 24.8-48.1). Anamnestic factors were structured into domains. Meta-analyses revealed gastroesophageal reflux disease (GERD; padj. = .008; OR = 1.98, 95% CI: 1.37-2.87), consumption of acidic food (padj. < .001; OR = 5.14, 95% CI: 3.56-7.42) and acidic drinks (padj. < .001; OR = 6.90, 95% CI: 4.64-10.25), holding beverages in the mouth while drinking (padj. = .035; OR = 1.82, 95% CI: 1.26-2.63), and snacking regularly (padj. = .041; OR = 1.58, 95% CI: 1.18-2.10) to be significantly associated with erosive tooth wear. CONCLUSION: Future research should use standardized questionnaires to assess erosive tooth wear and its underlying risk factors (PROSPERO: CRD4202339776).

[Prevalence of exogenous pigmentations and caries by intake of ferric supplements in primary dentition]. / Prevalencia de pigmentaciones exógenas y caries por ingesta de suplementos férricos en dentición primaria.

Objective: The aim of this study was to determine the prevalence of extrinsic black pigmentation in primary dentition and its relationship with dental caries in children aged 3 to 5 years. Materials and methods: The study design was descriptive, prospective, cross-sectional and observational; The sample of the present study consisted of 79 children who were receiving treatment with ferrous sulfate, who underwent a clinical examination and odontogram. To determine the presence of extrinsic black pigmentation, the Shourie classification was used. Results: A low prevalence of extrinsic pigmentation of 7.6% was found, and children with extrinsic pigmentation had a Ceod of 9.83+-3.601, while those children without the presence of pigmentations had a Ceod of 4.60+-3.248. Conclusions: A significant relationship was found between the Ceod index and extrinsic black pigmentation (p<0.001).

Sexual dimorphism in the dwarf round ray Urotrygon nana.

This paper presents information on the morphological, morphometric, and dental sex differences in the dwarf round ray Urotrygon nana. We recorded 12 morphological traits, sex, the distribution pattern of dermal denticles, the number of tooth rows, and the tooth shape of 466 individuals. The disc width of females ranged from 50 to 172 mm and that of males ranged from 53 to 135 mm. A neuronal classification model and a correspondence analysis showed that female disc width was 21.5% broader, and the distance from the rostrum to the anus was 17.7% longer than that of males, whereas males presented 19.5% greater distance between the nostrils, 9.7% greater preorbital snout length, 6.8% greater cloaca to caudal-fin length, 2.7% greater interorbital distance, and 1.1% greater total length than females. The disc of adult males, including the abdominal cavity area, was densely covered with dermal denticles, which were slightly larger than those observed in females. Females presented homodont dentition with molariform teeth and a smooth lozenge-shaped crown with rounded margins. Males exhibited homodonty but with tooth morphology variations in individuals of different sizes (from molariforms to sharper cusp teeth). There were changes in disc shape (from subcircular to oval), distribution and size of dermal denticles (more abundant and larger), and tooth shape (from molariform to monocuspid teeth) during male development, from neonates to adults. U. nana exhibited sexual dimorphism in size, disc shape, number and shape of teeth, and distribution and size of dermal denticles.

Prevalence of Malocclusion Traits in Primary Dentition, 2010-2024: A Systematic Review.

The present review was aimed to describe the prevalence and the regional distribution of malocclusion among preschool children worldwide. Two independent reviewers performed a systematic literature search to identify English publications from January 2010 to May 2024 using PubMed, ISI Web of Science and Embase. Search MeSH key words were "malocclusion", "primary dentition" and "child, preschool". The reporting quality was assessed by the modified Newcastle-Ottawa Quality Assessment Scale. We identified 2599 publications and recruited 47 articles. Fourteen of the included studies were conducted in Asia, four in Europe, twenty-eight in South America and one in Africa. The prevalence of malocclusion ranged from 28.4% to 83.9%, and half of the reported prevalences were higher than 50%. The highest percentage was in Asia (61.81%), followed by Europe (61.50%), South America (52.69%) and Africa (32.50%). Statistically significant differences existed in deep overbite, anterior open bite, posterior crossbite, edge-to-edge incisor relationship and distal step between continents (p < 0.05). Europe showed the highest prevalence (33.08%) of deep overbite. Africa showed the highest prevalence (18.60%) of anterior open bite. Europe showed the highest prevalence (15.38%) of posterior crossbite. The most common malocclusion traits were increased overjet and deep overbite. To conclude, malocclusion remained prevalent in the primary dentition and varied between countries.

Interdisciplinary treatment of a mutilated dentition with multiple missing teeth and horizontal impaction of a mandibular third molar using an orthodontic skeletal anchorage and dental implants-Case report.

OBJECTIVE: This case report presents a female adult patient who exhibits poor oral hygiene, a mutilated dentition with multiple missing teeth, and skeletal asymmetry. CLINICAL CONSIDERATIONS: Interdisciplinary treatment was necessary to maintain oral hygiene, treat caries, extract residual roots, and upright a horizontally impacted third molar using a miniplate. Additionally, orthodontic mini-implants were utilized as anchorage to improve sagittal relationship and space closing. Space management was completed with orthodontic treatment, followed by restoration of the multiple missing teeth with dental implants. CONCLUSION: Consequently, an esthetic smile and functional occlusion were achieved by interdisciplinary treatment using orthodontic skeletal anchorage devices and dental implants. CLINICAL SIGNIFICANCE: Missing mandibular first molar spaces were closed with retraction of the anterior teeth and protraction of the mandibular second molars using orthodontic mini-implants. The mandibular right third molar, which should have erupted, was protracted with the second molar, while the horizontally impacted mandibular left third molar was uprighted using a miniplate and was protracted with an orthodontic mini-implant. The missing maxillary lateral incisors were replaced with the maxillary canines, and the maxillary canines were replaced with the maxillary first premolars. The missing maxillary right second premolar and first molar and left first and second molars were successfully restored with dental implants.

Influence of changing dentition on food texture preferences and perception of eating difficulty in Australian children.

The transition from primary to permanent dentition is an important phase in children's oral development, yet its impact on texture perception and food acceptance are less explored. This study aimed to investigate how changing dentition and tooth loss influence texture preferences and perception of eating difficulty among children aged 5 to 12 years. Children (n = 475) completed a forced-choice questionnaire featuring drawings of six food pairs, each available in hard or soft texture, and reported whether they had started losing primary teeth and the number of tooth gaps present. They also tasted four samples: chocolate snacks (cake and biscuits) and cheddar cheese (grated and cubes), evaluating their perceived eating difficulty and liking for each sample. Analysis of questionnaire responses showed a general preference for softer food textures among children, with a 36% probability of choosing hard foods. Preferences were not related to child's dental state, including primary teeth loss (p = .13) or number of tooth gaps (p = .45). In the taste test, chocolate biscuits and cheese cubes were perceived as significantly more difficult to eat than chocolate cake and grated cheese, respectively (both p < .0001). Children with more than two tooth gaps reported greater eating difficulty for chocolate biscuits and cheese cubes compared to children with fewer or no tooth gaps. This study demonstrated that children's texture preferences for hardness of foods remained consistent during dentition change, while their perception of eating difficulty could vary based on their dental state at specific points in time.

Generalized Non-syndromic Hypertaurodontism With Delayed Eruption: A Case Report.

Taurodontism is a rare dental anomaly defined by a change in tooth shape due to Hertwig's epithelial sheath not folding inward at the right horizontal level. It has a larger pulp chamber and a pulpal floor that is shifted apically, and the cementoenamel junction (CEJ) is not constricted. This condition is more frequently observed in permanent teeth than in primary teeth and can occur in a bilateral or unilateral manner, affecting any quadrant or group of teeth. This brief case report discusses a 14-year-old female patient who presented with complaints of decayed teeth in the lower right and left posterior regions of the jaw. Radiographic examination revealed the presence of non-syndromic taurodontism in both the deciduous teeth and their permanent successors. Dental management included oral prophylaxis, application of pit and fissure sealants, indirect pulp capping, and restoration with glass ionomer cement for the affected teeth.

Correlation between oral muscle pressure and malocclusion in mixed dentition: a cross-sectional study.

OBJECTIVE: To investigate the relationship between oral muscle pressure and malocclusion in the mixed dentition. MATERIALS AND METHODS: Maximum tongue, lip and cheek pressure was measured using the Iowa Oral Performance Instrument (IOPI) in 3 patient cohorts: patients with (1) posterior crossbite, (2) class II relationship and (3) a control group of patients without malocclusion. Linear models were used to compare the mean differences in muscle pressure between groups, with correction for age and gender. The imbalance between lips and tongue and between lips and cheeks was calculated by the Delta z-scores of each group. RESULTS: A total of 146 participants were included, 46 (mean age 8.71±0.85), 41 (mean age 11.74±1.17) and 35 (mean age 10.71±1.92) in groups 1, 2 and 3 respectively. Patients with malocclusion showed significantly higher lip and lower cheek pressure and imbalance favouring the lips over the tongue compared to controls. Class II,1 patients showed significantly higher tongue pressure than Class II,2. No differences were found in muscle pressure or imbalance between crossbite and Class II nor between crossbite types. CONCLUSION AND CLINICAL RELEVANCE: These findings suggest that oral muscle pressure may be associated with malocclusion. This highlights the importance of functional diagnosis and its implications on the prevention and treatment of malocclusion, as well as on orthodontic stability.

Squamates as a model to understand key dental features of vertebrates.

Thanks to their exceptional diversity, teeth are among the most distinctive features of vertebrates. Parameters such as tooth size, shape, number, identity, and implantation can have substantial implications for the ecology and certain social behaviors of toothed species. Despite decades of research primarily focused on mammalian dentition, particularly using the laboratory mouse model, squamate reptiles ("lizards" and snakes) offer a wide array of tooth types and dentition variations. This diversity, which includes differences in size, shape, function, and replacement capacity, provides invaluable opportunities for investigating these fundamental properties. The central bearded dragon (Pogona vitticeps), a popular pet species with well-established husbandry practices, is of particular interest. It features a broad spectrum of morphs and spontaneous mutants and exhibits a wide range of heterodont phenotypes, including variation in the size, shape, number, implantation, and renewal of teeth at both posterior and anterior positions. These characteristics position the species as a crucial model organism for developmental studies in tooth research and for gaining deeper insights into evolutionary patterns of vertebrate dentitions. In this article, we provide an overview of the current understanding of squamate dentition, its diversity, development, and replacement. Furthermore, we discuss the significant advantages offered by squamate species as model organisms for investigating the evolutionary and developmental aspects of vertebrate dentition.

Digital-assisted multidisciplinary treatment for complex occlusal rehabilitation: an 18-month follow-up case report.

BACKGROUND: This case report highlights the importance of standardized and fully digital sequential treatment in complex occlusal rehabilitation cases. To fully resolve the patient's dental needs, such cases often require multidisciplinary interventions including periodontal therapy, endodontic treatment, anterior esthetics, implant restoration, and prosthetic rehabilitation. A fully digital workflow (including facial scanners, intraoral scanners, jaw motion tracking systems, virtual articulators, and computer-aided design software) streamlined the complex treatment, enhancing workflow simplicity, efficiency, visibility, and precision. CASE PRESENTATION: The patient presented with decreased chewing efficiency of the upper and lower prostheses, along with unsatisfactory esthetic appearance of the anterior teeth. After physical examination and radiological assessment, this complex occlusal rehabilitation case required periodontal therapy, anterior esthetic enhancement, implant restoration, and fixed prosthetic rehabilitation. Therefore, a fully digital workflow was adopted. Full-crown prostheses were placed on teeth 13, 23, and 34; a fixed bridge encompassed positions 32 to 42, and single implant crowns were placed on teeth 35 and 36. Implant-supported fixed bridges were constructed for teeth 12 to 22 and 44 to 46, anchored by implants at teeth 12, 22, 44, and 46. All definitive prostheses were fabricated from zirconia ceramics, chosen for their durability and esthetic characteristics. Finally, restorations with satisfactory esthetic and functional characteristics were seated, preserving the tooth and its supporting structures. During treatment and follow-up, the T-scan occlusal analysis system was utilized to continuously monitor and guide the adjustment of occlusal distribution across the patient's dental arches. After 18 months, the patient remains satisfied with the definitive restorations. CONCLUSIONS: This report is intended to help dentists understand and implement standardized and fully digital workflows during the management of complex occlusal rehabilitation cases; it may also facilitate harmonious integration of esthetic and functional characteristics.

Oral microbial profiles of extrinsic black tooth stain in primary dentition: A literature review.

The extrinsic black tooth stain (EBS) is commonly found in primary dentition. Patients cannot clean the EBS; this can only be done by professional scaling and debridement. It also has a tendency to reform, which significantly compromises children's aesthetics and even affects their quality of life. However, there is no conclusive evidence on the etiology of the EBS. The associations between the EBS and related oral microbial features is one of the research hot topics. No literature review summarized these research progresses in this area. Therefore, we reviewed the literature on the microbiology of the EBS since 1931 and reported as the following 5 aspects: molecular biotechnology, morphological structure and physiochemical characteristics, microbial etiology hypothesis and core microbial characteristics. The EBS is a special dental plaque mainly composed of Gram-positive bacilli and cocci with scattered calcium deposits that acquired salivary pellicle activates. Early studies showed that the Actinomyces was the main pathogenic bacteria. With advances in biological research techniques, the 'core microbiome' was proposed. The potential pathogenic genera were Actinomyces, Prevotella nigrescens, Pseudotropinibacterium, Leptotrichia, Neisseria and Rothia. However, the pathogenic species of the above genera were still unclear. Currently, it is believed that the EBS consists of iron compounds or black substances that oral bacterial metabolism produces or that the bacterial metabolites formed after chemical reactions in the micro-ecological environment.

Predictability of expansion movements performed by clear aligners in mixed dentition in both arches: a retrospective study on digital casts.

BACKGROUND: to evaluate the predictability of expansion achieved in patients in early mixed dentition treated with Clear Aligners (CA), analyzing the efficiency of the expansion at the end of the first set of aligners and at the end of the therapy in the upper and lower arch. METHODS: 36 patients (20 F, 16 M; mean age 8.3 ± 1.5 years) were selected retrospectively from the Department of Orthodontics of the Hospital of Rome "Tor Vergata". All subjects were treated with CA with no other auxiliaries than attachments. For each patient a standardized sequential expansion protocol was planned for both arches. Digital dental casts were created at three observation periods from an intraoral scanner: prior to treatment (T0), at the end of the first set of aligners (T1), at the end of treatment (T2). The 3D models in planned position determined by the first Clincheck (CC) were obtained for comparison with T1 and T2. Six linear transversal measurements were used to evaluate the dimensional changes and the predictability of expansion movements, comparing T1-CC and T2-CC. RESULTS: a statistically significant increase within the pre-treatment and the final outcomes for all the variables examined was found. In the upper arch, the greatest level of predictability was detected at the level of the first (46.44%) and second deciduous molar width (44.95%) at T1. The analysis of T2-CC changes showed a significant increase in the percentage of predictability of expansion at the level of the first permanent molars, at mesial (54.86%) and distal (58.92%) width. In the lower arch, a higher percentage of predictability than the upper arch was reported at T1-CC and T2-CC, with the greatest values at the level of second (T1-CC: 48.70%; T2-CC: 75.32%) and first deciduous molar width (T1-CC: 45.71%; T2-CC: 72.75%). CONCLUSIONS: CA can induce significant transversal increments. The predictability of expansion is variable, but it did not exceed the 50% during the first set of aligners. It was necessary to apply refinement set to achieve a good predictability for expansion of about 70%. The expansion in the lower arch was observed to be more predictable than in the upper arch.

Frequency and variability of nonmetric dental crown traits of primary and permanent molars in a group of orthodontic patients.

BACKGROUND: The present study aimed to assess the frequency and variation of 13 nonmetric dental crown traits (NDCT) in permanent and primary molars in German orthodontic patients. METHODS: Dental records from orthodontic patients were screened and evaluated. First and second permanent and primary upper and lower molars (from left and right sides) were assessed. Teeth with cavitated dental caries, occlusal wear, restorations and obvious dental deformities were not evaluated. The NDCT for permanent molars were identified and scored according to the odontoscopic system developed by Arizona State University Dental Anthropology System (ASUDAS). The NDCT for primary molars were identified and scored according to ASUDAS, Hanihara's method and Sciulli's method. The χ2 test was used to investigate side preference and sexual dimorphism at a significance level of p ≤ 0.050. RESULTS: A total of 163 orthodontic patients (82 males and 81 females) aged 8-14 years were included. A sexual dimorphism was observed for the hypocone in first upper permanent molar (p = 0.041). The protostylid was observed in lower permanent molars (range 2.1-10%). Males presented more hypoconulid than females (p = 0.019). Only females presented the distal trigonid crest in lower first permanent molars (p = 0.002). The most common groove pattern in primary molars was Y; male presented more Y grade than females in the lower second primary molar (p = 0.039). Asymmetry was observed in some traits, ranging from 0 to 100%. CONCLUSION: The present study showed the frequency of NDCT of molars in German orthodontic patients and demonstrated that some traits present sexual dimorphism.

A Leap Beyond Traditional Methods: A Case Report on the Horizontal Loop Distal Shoe.

This case report presents the successful management of a four-year-old male patient with pain in the lower right back tooth region. Clinical and radiographic examinations revealed the necessity for extraction of tooth 85 due to persistent infection and bone resorption, necessitating space maintenance. A modified distal shoe space maintainer, incorporating horizontal loops for enhanced adjustability, was utilized postextraction. The appliance was fabricated, cemented, and monitored through follow-up visits. At the 24-month recall, the permanent mandibular first molar (tooth 46) was clinically visible, indicating successful space maintenance. Incorporating horizontal loops into the distal shoe space maintainer represents an innovative approach in pediatric dentistry, offering clinicians a versatile tool for managing space loss and promoting optimal eruptive patterns.

A Staged Digital Protocol for the Terminal Dentition for Immediate Loading using a Provi-guide.

This report describes a step-by-step stagged digital protocol for the terminal dentition patient using a Provi-guide. This protocol will improve implant placement accuracy, shorten treatment time, and assure an implant-supported fixed complete denture immediately loaded after extraction of the remaining terminal dentition and complete edentulism. The novelty of the Provi-guide technique described is that it serves two objectives: 1. a non-limiting surgical guide, and 2. a fixed interim prosthesis. Implants placed in the described digital stagged protocol can serve both the interim and the final prosthesis.

Unravelling the Complexities of Bite Force Determinants in Paediatric Patients: A Literature Review.

The amount of maximum voluntary bite force (MVBF) is determined by the combined action of the jaw elevator muscles, which are altered jaw biomechanics and reflex processes. Bite force (BF) measurements can yield valuable information on the activity and function of the jaw muscles. The accuracy of biting force measurements depends on several variables, including age, gender, malocclusion, dental caries, dental prostheses and temporomandibular joint (TMJ). This information is essential for evaluating the development and function of the masticatory system, identifying potential abnormalities or impairments and guiding appropriate treatment interventions for paediatric patients. The aim of this article is to review the literature on the factors affecting bite force and the importance of these factors in assessing dental development and guiding interventions for paediatric patients with bite force-related issues. Additionally, establishing normative values for bite force in different age groups can aid in monitoring growth and detecting any deviations from expected patterns. Measuring bite force in paediatric patients is significant in comprehensive oral health assessment and management.

A Cybertaxonomic Revision of the "Crocidura pergrisea" Species Complex with a Special Focus on Endemic Rocky Shrews: Crocidura armenica and Crocidura arispa (Soricidae).

The extraction of museum DNA from a unique collection of samples of the "Crocidura pergrisea" species complex, which comprises local endemics of Central and West Asia, allowed us to determine their inter- and intragroup relationships. The first step of this study was the re-evaluation of heavily damaged type specimens of C. armenica via a microcomputed-tomography-based cybertaxonomic approach (CTtax), which enabled a precise description of the species' morphology; three-dimensional models of the cybertypes were made available through the MorphoBank Repository. We developed the "AProMaDesU" pipeline on the basis of five requirements for micro-CT-based cyber-datasets in relation to mammalian collections. Our second step was a combination of several meticulous approaches to morphological investigation against a background of a cytb-based phylogeny, which helped us to make a taxonomic decision about the status of species of the "pergrisea" group, e.g., C. arispa, C. armenica, and C. serezkyensis, when the morphological results were partly incongruent with the molecular phylogeny. Nevertheless, under two assumptions, our findings preserved a separate species-level status of C. serezkyensis and C. arispa. In addition, we restored the species-level status of C. armenica. This taxonomic decision is based on our morphospace analysis, which revealed unique craniomandibular shape transformations within the rocky shrews that helped them with the transition to a new area of morphospace/trophic niches and consequently separated them from the other analyzed Crocidura groups.