RESUMO
Due to dwindling petroleum resources and the need for environmental protection, the development of bio-based flame retardants has received much attention. In order to explore the feasibility of fully biomass polyelectrolyte complexes (PEC) for polyolefin flame retardant applications, chitosan (CS), sodium alginate (SA), and sodium phytate (SP) were used to prepare CS-based fully biomass PEC intercalated montmorillonite (MMT) hybrid biomaterials (SA-CS@MMT and SP-CS@MMT). The effects of two hybrid biomaterials on the fire safety and mechanical properties of intumescent flame-retardant polypropylene (PP) composites were compared. The SP-CS@MMT showed the best flame retardancy and toughening effect at the same addition amount. After adding 5 wt% SP-CS@MMT, the limiting oxygen index (LOI) value of PP5 reached 30.9 %, and the peak heat release rate (pHRR) decreased from 1348 kW/m2 to 163 kW/m2. In addition, the hydrogen bonding between polyelectrolyte complexes significantly improved the mechanical properties of PP composites. Compared with PP2, the tensile strength of PP5 increased by 59 %. This study provided an efficient and eco-friendly strategy for the large-scale production of renewable biomaterials with good thermal stability and expanded the application of macromolecular biomaterials in the field of fire safety.
RESUMO
Macroporous niobium-doped tin oxide (NTO) is introduced as a robust alternative to conventional carbon-based catalyst supports to improve the durability and performance of polymer electrolyte fuel cells (PEFCs). Metal oxides like NTO are more stable than carbon under PEFC operational conditions, but they can compromise gas diffusion and water management because of their denser structures. To address this tradeoff, we synthesized macroporous NTO particles using a flame-assisted spray-drying technique employing poly(methyl methacrylate) as a templating agent. X-ray diffraction analysis and scanning electron microscopy confirmed the preservation of crystallinity and revealed a macroporous morphology with larger pore volumes and diameters than those in flame-made NTO nanoparticles, as revealed by mercury porosimetry. The macroporous NTO particles exhibited enhanced maximum current density and reduced gas diffusion resistance relative to commercial carbon supports. Our findings establish a foundation for integrating macroporous NTO structures into PEFCs to optimize durability and performance.
RESUMO
The durable flame-retardant functional coating of polyester/cotton (T/C) blend fabrics is both interesting and challenging. In this study, a novel in-situ polymerization strategy for phosphorus/nitrogen-based flame-retardant on T/C blend samples was developed through the polycondensation of tetramethylolphosphonium sulfate, dicyandiamide, and anionic cyclic phosphate ester. The chemical structure of the polycondensation compounds, as well as the surface morphology, combustion behavior, flame-retardant capacity, washing durability and flame-retardant mechanism of the coated T/C blend fabrics, were investigated. The coated T/C blend fabrics demonstrated excellent self-extinguishing performance, with the damaged length decreasing to as low as 8.0 cm and the LOI reaching 28 %. Moreover, the peak heat release rate of the coated T/C blend fabrics decreased by 39.7 %. The superior flame retardancy can be attributed to the enhanced dehydration and carbonization by phosphate groups in the condensed phase, as well as the quenching effect and diluting effect in the gas phase. Additionally, the coated T/C blend fabrics exhibited remarkable washing durability and still achieved self-extinguishing after 65 washing cycles, and the in-situ deposition of insoluble three-dimensional polycondensation compounds onto the T/C blend fabrics was beneficial. The flame-retardant coating had a minor impact on the whiteness, tensile strength and breathability of the T/C blend fabrics.
RESUMO
Developing durable protective cotton fabrics (CF) against potential environmental dangers such as fire hazards and bacterial growth remains an imperative but tough challenge. In this study, flame retardant, antibacterial and hydrophobic CF were successfully prepared via two-step coating. The inner coating entailed polyelectrolyte complexes consisting of polyethyleneimine and ammonium polyphosphate with the goal of enhancing the flame retardancy of CF. Halloysite nanotubes (HNTs), a kind of tubular silicate mineral, were creatively modified and introduced to multifunctional coatings to improve flame retardant and antibacterial properties of CF. N-halamine modified HNTs (HNTs-EA-Cl) and polydimethylsiloxane were applied as the outer coating to endow CF with antibacterial and hydrophobic properties and further improve the flame retardancy of CF. After halloysite-based inorganic-organic hybrid coatings, the limiting oxygen index of the treated samples (PAHP-CF) was over 28 %, and the release of heat and smoke was significantly inhibited. PAHP-CF could inactivate 100 % E. coli and S. aureus within 2 h. More importantly, PAHP-CF showed excellent hydrophobicity with a water contact angle of 148° and exhibited great prevention of bacterial adhesion. PAHP-CF exhibited excellent washing durability undergoing 5 washing cycles. This study promotes the development of multifunctional coatings and offers a new way to manufacture multifunctional cotton fabrics.
RESUMO
Fireworks play a vital role in festive celebrations and entertainment. These fireworks industries are administered by the Petroleum and Explosives Safety Organisation (PESO), Nagpur, Government of India. Even though PESO prescribed the standard composition for various fireworks products, concerns persist regarding the potential deviation from these standards, particularly in the pursuit of increased noise levels to attract consumers. This change in the burning and reactive properties of chemicals could potentially lead to accidents and environmental pollution. The current work investigated the combustion characteristics of two unknown market flash powder samples and a PESO standard sample. The samples were openly ignited in a controlled atmosphere, and video recordings of the resulting chemical flames were analyzed to determine fire area, flame intensity, and motion magnitude. The residues were also collected for EDAX and SEM analysis. Fire pixels from video frames are segmented to create a comprehensive database detailing flame area and motion magnitude under different circumstances. From the flame area profile, motion magnitude and SEM/EDAX analysis, it is found that PESO standard sample combustion is better than the unknown flash powder combustion.
RESUMO
BACKGROUND: Plastic additives have adverse effects on human health. Children frequently use toys that contain various substances found in paints, plasticizers, and other materials, which heighten the risk of specific chemical exposure. Infants are particularly prone to chemical exposure through the "mouthing" behavior because of the possibility of placing toys in their mouths. Thus, this vulnerability should be considered during risk assessments of chemical exposure. METHODS: This study performed a comprehensive analysis of the chemical components in various 84 plastic toys including "designated toys" (toys that may be harmful to infant health if in contact with their mouths: Article 78 of the Enforcement Regulations of the Food Sanitation Law by the Minister of Health, Labor and Welfare) such as dolls, balls, blocks, bathing toys, toy vehicles, pacifiers, and household items, purchased in the Japanese market by nontargeted and targeted analysis. RESULTS: Plasticizers, flame retardants, and fragrances were the main compounds in almost all the toy products. The results showed that plastic products made in China tended to contain high levels of phthalate esters. In particular, hazardous plasticizers, such as diisodecyl, di-n-octyl, and diisononyl phthalates were detected above the regulatory limit (0.1%) in used products manufactured before regulations were passed in Japan. Furthermore, we detected alternative plasticizers, such as acetyl tributyl citrate (ATBC; 52%), diisononyl adipate (DINA; 50%), and di(2-ethylhexyl) terephthalate (DEHT; 40%). ATBC was detected at high concentrations in numerous toy products. Thus, infants with free access to indoor plastic toys might be exposed to these chemicals. CONCLUSIONS: This study observed that the chemical profiles of toy products were dependent on the year of manufacture. Furthermore, the detection of currently regulated plasticizers in secondhand products manufactured before regulations were enforced, along with the increasing trend of using alternative substances to regulated phthalate esters in products, suggests the potential exposure of infants to these plasticizers through the use of toys. Therefore, regular fact-finding surveys should continue to be conducted for the risk assessment and safety management of domestic toy products.
Assuntos
Plastificantes , Plásticos , Jogos e Brinquedos , Japão , Plastificantes/análise , Humanos , Plásticos/análise , Lactente , Retardadores de Chama/análise , Ácidos Ftálicos/análiseRESUMO
BACKGROUND: Although human biomonitoring of environmental chemicals has been considered a gold standard, these methods can be costly, burdensome, and prone to unwanted sources of variability that may cause confounding. Silicone wristbands have recently emerged as innovative passive samplers for measuring personal exposures. METHODS: In a pilot study from 2019 to 2021 involving 55 children aged 5-9 years in Seattle and Yakima, Washington, we utilized silicone wristbands to explore associations of sociodemographic variables and COVID-19-related restrictions, including school closures, with exposures to numerous chemicals including brominated and organophosphate ester (OPE) flame retardants, polychlorinated biphenyls, polycyclic aromatic hydrocarbons (PAHs), phthalates, and pesticides. We additionally conducted the first analysis testing silicone wristband chemicals as predictors of child wheeze, individually and in mixtures via logistic weighted quantile sum regression (WQS). RESULTS: Among 109 semi-volatile organic compounds measured, we detected 40 in >60% of wristbands worn by children continuously for an average of 5 days. Chemicals were generally positively correlated, especially within the same class. Male sex and increasing age were linked with higher exposures across several chemical classes; Hispanic/Latino ethnicity was linked with higher exposures to some phthalates and OPEs. COVID-19 restrictions were associated with lower wristband concentrations of brominated and triaryl OPE flame retardants. Each one-decile higher WQS exposure index was suggestively associated with 2.11-fold [95% CI: 0.93-4.80] higher odds of child wheeze. Risk of child wheeze was higher per 10-fold increase in the PAH chrysene (RR = 1.93[1.07-3.49]), the pesticide cis-permethrin (3.31[1.23-8.91]), and di-isononyl phthalate (DINP) (5.40[1.22-24.0]) CONCLUSIONS: Our identification of demographic factors including sex, age, and ethnicity associated with chemical exposures may aid efforts to mitigate exposure disparities. Lower exposures to flame retardants during pandemic restrictions corroborates prior evidence of higher levels of these chemicals in school versus home environments. Future research in larger cohorts is needed to validate these findings.
RESUMO
Brominated flame retardants, considered emerging contaminants, are widespread and persist in the environment. This study investigated the contamination of legacy and novel brominated flame retardants in paired outdoor settled dusts and pine needles sampled from a megacity in the Eastern China. The measured total concentrations of PBDEs (∑27PBDEs) in outdoor settled dusts and pine needles were in the range of 77.4-345.2 ng/g dw and 20.7-120.0 ng/g dw, respectively, and equivalent ranges for novel brominated flame retardants (∑11NBFRs) were 25.7-1917.2 ng/g dw and 9.4-38.7 ng/g dw, respectively. BDE-209 and DBDPE dominated PBDEs and NBFRs profiles, respectively, in both dusts and pine needles. Outdoor settled dusts exhibited greater potentials to accumulate high-brominated PBDE homologues and EH-TBB while pine needles tended to accumulate low-brominated PBDE homologues, BTBPE and TBC. The plant uptake of BFRs was interpreted by McLachlan's framework on the assumption that the levels of BFRs in outdoor settled dusts and particle phase of air were positively correlated. The accumulation of PBDEs in pine needles was dominated by equilibrium partitioning between the vegetation and the gas phase when log KOA values <10 and by particle-bound deposition when log KOA values >13. However, NBFRs exhibited more complicated accumulation behavior. The predicted 50th percentile of the estimated daily intakes of ∑27PBDEs via outdoor settled dusts exposure for adults and children were 3.5 × 10-2 and 1.4 × 10-1 ng/kg body weight (bw)/day, respectively, and equivalent values for ∑11NBFRs were 1.6 × 10-2 ng/kg bw/day and 6.3 × 10-2 ng/kg bw/day, respectively. The calculated hazard index (HI) values were far <1, indicating exposure of BFRs via outdoor settled dust intake would not pose potential non-carcinogenic health risks to both adults and children.
RESUMO
The flattened bamboo board (FB) represents a promising innovation in the bamboo industry. To address the challenges of flammability and hygroscopicity, composite coatings consisting of melamine (MEL), phytic acid (PA), cerium ions (Ce3+), and sodium laurate (La) are assembled on the FB surface through an in-situ impregnation strategy. The resulting MEL/PA-Ce3+@La FB exhibits exceptional flame retardancy. It achieves a V-0 rating in the vertical burning test (UL-94) and boasts a high limiting oxygen index (LOI) value of 38.5 %. The coated FB exhibits superhydrophobicity, evidenced by a water contact angle of 156.5°, which can be attributed to the in-situ growth of PA-Ce3+ complexes (for constructing micro/nanoscale coarse structures) and the modification with La (for reducing surface energy).This superhydrophobic surface imparts both self-cleaning and anti-mold properties to the coated FB. Moreover, the coated FB exhibits excellent mechanical stability, withstanding 36 cycles of sandpaper abrasion and tape peeling without losing its hydrophobicity. In summary, this work provides an innovative strategy for the bamboo processing industry to produce flattened bamboo boards with combined flame retardancy, superhydrophobic and anti-mold properties. Such versatility holds significant potential to facilitate the utilization of flattened bamboo boards in the construction and decorative materials industries.
RESUMO
Environmental contamination of aquatic systems by per- and polyfluoroalkyl substances (PFAS) has generated significant health concerns. Remediation of contaminated sites such as the fire-fighting emergency training grounds that use aqueous film-forming foams is a high priority. Phytoremediation may help play a part in removing PFAS from such contaminated waters. We investigated the potential of the water fern Azolla filiculoides, which is used for phytoremediation of a wide range of contaminants, to uptake seven common PFAS (perfluorobutanoic acid [PFBA], perfluorobutane sulfonic acid [PFBS], perfluoroheptanoic acid [PFHpA], perfluorohexanoic acid [PFHxA], perfluorohexane sulfonic acid [PFHxS], perfluorooctanoic acid [PFOA], and perfluoropentanoic acid [PFPeA]), during a 12-day exposure to environmentally relevant concentrations delivered as equimolar mixtures: low (∑PFAS = 0.0123 ± 1.89 µmol L-1), medium (∑PFAS = 0.123 ± 2.88 µmol L-1), and high (∑PFAS = 1.39 µmol L-1) treatments, equivalent to approximately 5, 50, and 500 µg L-1 total PFAS, respectively. The possible phytotoxic effects of PFAS were measured at 3-day intervals using chlorophyll a content, photosystem II efficiency (Fv/Fm), performance index, and specific growth rate. The PFAS concentrations in plant tissue and water were also measured every 3 days using ultra-high-performance liquid chromatography-tandem mass spectrometry. Treatments with PFAS did not lead to any detectable phytotoxic effects. All seven PFAS were detected in plant tissue, with the greatest uptake occurring during the first 6 days of exposure. After 12 days of exposure, a maximum bioconcentration factor was recorded for PFBA of 1.30 and a minimum of 0.192 for PFBS. Consequently, the application of Azolla spp. as a stand-alone system for phytoremediation of PFAS in aquatic environments is not sufficient to substantially reduce PFAS concentrations. Environ Toxicol Chem 2024;00:1-12. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
RESUMO
Around a hundred of novel brominated flame retardants are currently being used to replace those regulated in the 2000s. However, data about their production, usage, and toxicity is still scarce, as well as their levels of contamination in the Mediterranean Sea and the subsequent risk. Our goal was to select the relevant novel brominated flame retardants to monitor and to apply it along the northeastern Mediterranean Sea. We proposed a ranking for novel brominated flame retardants based on their production or import, occurrence, and ecotoxicology, yielding to a selection of 21 priority molecules. From this list, 16 compounds were analyzed in ten coastal suspended matter samples, together with six related chemicals. To assess their occurrence in comparison to better documented flame retardants, eight legacy polybromodiphenyl ethers, seven polychlorobiphenyls, and short- and medium-chain chlorinated paraffins were also targeted. Novel brominated flame retardants and polychlorobiphenyls were detected in all the samples. Polybromodiphenyl ethers and chlorinated paraffins were detected in nine and seven samples, respectively. Out of the 22 novel brominated flame retardants analyzed, nine were detected, with total concentrations ranging from 0.4 to 18.5 ng.g-1 d.w., which was often higher than that of polybromodiphenyl ethers. A high risk for 2,4,6tribromophenol and PCB 118 was assessed in two and six samples, respectively. To our knowledge, this is the first priority ranking and screening of most of the novel brominated flame retardants selected in the French Mediterranean Sea.
RESUMO
Microplastic (MP) pollution is a potential threat to marine organisms. In vitro toxicity of MPs and other pollutants, such as pharmaceutically active compounds (PhACs) and brominated flame retardants (BFRs), has been understudied. This study aimed to investigate the effects of polystyrene microplastics (PS-MPs) with different particle sizes on two biomarkers: ethoxyresorufin-O-deethylase (EROD) and glutathione S-transferase (GST) in tilapia liver homogenates. The study also examined the combined effects of PS-MPs with various environmental contaminants, including three metal ions (Cu2+, Zn2+, Pb2+), three BFRs, and six PhACs. PS-MPs alone had no remarkable effects on the two biomarkers at the selected concentrations. However, PS-MPs combined with other pollutants significantly affected the two biomarkers in most situations. For EROD activity, PS + metal ions (except Zn2+ at 1000 µg/L), PS + BFRs (except decabromodiphenyl oxide (BDE-209)) or PS+ trimethoprim (TMP) significantly inhibited activity values, whereas PS+ 4-acetaminophen (AMP) induced EROD activity. For GST, PS together with most tested pollutants (except PS+ ibuprofen (IBF)) greatly decreased the activities. Accordingly, future research should focus on combined toxicity of mixtures to set more reasonable environmental safety evaluation standards.
RESUMO
The optimization of flame retardancy and thermal conductivity in epoxy resin (EP), utilized in critical applications such as mechanical components and electronics packaging, is a significant challenge. This study introduces a novel, ultrasound-assisted self-assembly technique to create a dual-functional filler consisting of carbon nanotubes and ammonium polyphosphate (CNTs@APP). This method, leveraging dynamic ligand interactions and strategic solvent selection, allows for precise control over the assembly and distribution of CNTs on APP surfaces, distinguishing it from conventional blending approaches. The integration of 7.5 wt.% CNTs@APP10 into EP nanocomposites results in substantial improvements in flame retardancy, as evidenced by a limiting oxygen index (LOI) value of 31.8% and achievement of the UL-94 V-0 rating. Additionally, critical fire hazard indicators, including total heat release (THR), total smoke release (TSR), and the peak intensity of CO yield (PCOY), are significantly reduced by 45.9% to 77.5%. This method also leads to a remarkable 3.6-fold increase in char yield, demonstrating its game-changing potential over traditional blending techniques. Moreover, despite minimal CNTs addition, thermal conductivity is notably enhanced, showing a 53% increase. This study introduces a novel approach in the development of multifunctional EP nanocomposites, offering potential for wide range of applications.
RESUMO
Concerns regarding man-made organic chemicals pervading our ecosystem and having adverse and detrimental effects upon organisms, including man, have now been studied for several decades. Since the 1970s, some environmental pollutants were identified as having endocrine disrupting affects. These endocrine disrupting chemicals (EDC) were initially shown to have estrogenic or anti-estrogenic properties and some were also shown to bind to a variety of hormone receptors. However, since the 1990s it has also been identified that many of these EDC additionally, have the ability of causing abnormal alterations in Ca2+ signalling pathways (also commonly involved in hormone signalling), leading to exaggerated elevations in cytosolic [Ca2+] levels, that is known to cause activation of a number of cell death pathways. The major emphasis of this review is to present a personal perspective of the evidence for some types of EDC, specifically alkylphenols and brominated flame retardants (BFRs), causing direct effects on Ca2+ transporters (mainly the SERCA Ca2+ ATPases), culminating in acute cytotoxicity and cell death. Evidence is also presented to indicate that this Ca2+ATPase inhibition, which leads to abnormally elevated cytosolic [Ca2+], as well as a decreased luminal ER [Ca2+], which triggers the ER stress response, are both involved in acute cytotoxicity.
RESUMO
Lithium tantalate (LiTaO3) perovskite finds wide use in pyroelectric detectors, optical waveguides and piezoelectric transducers, stemming from its good mechanical and chemical stability and optical transparency. Herein, we present a method for synthesis of LiTaO3 nanoparticles using a scalable Flame Spray Pyrolysis (FSP) technology, that allows the formation of LiTaO3 nanomaterials in a single step. Raman, XRD and TEM studies allow for comprehension of the formation mechanism of the LiTaO3 nanophases, with particular emphasis on the penetration of Li atoms into the Ta-oxide lattice. We show that, control of the High-Temperature Particle Residence Time (HTPRT) in the FSP flame, is the key-parameter that allows successful penetration of the -otherwise amorphous- Li phase into the Ta2O5 nanophase. In this way, via control of the HTPRT in the FSP process, we synthesized a series of nanostructured LiTaO3 particles of varying phase composition from {amorphous Li/Ta2O5/LiTaO3} to {pure LiTaO3, 15-25 nm}. Finally, the photophysical activity of the FSP-made LiTaO3 was validated for photocatalytic H2 production from H2O. These data are discussed in conjunction with the role of the phase composition of the LiTaO3 nanoparticles. More generally, the present work allows a better understanding of the mechanism of ABO3 perovskite formation that requires the incorporation of two cations, A and B, into the nanolattice.
RESUMO
Since solid electrolytes have a broad electrochemical stability window, are exceptionally electrochemically stable against Li metal, and function as a physical separator to prevent dendrite growth, they are at the forefront of alternate possibilities, further increasing the stability and energy density of Li-ion batteries. NASICON-type electrolytes are a promising candidate due to their negligible moisture sensitivity, which results in outstanding stability and a lower probability of Li2CO3 passivity under the ambient atmosphere. However, one of the most promising representatives, Li1+xYxZr2-x(PO4)3 (LYZP), has multiple stable phases with significant variation in their corresponding Li-ion conductivity. In this paper, we have successfully synthesized the highly ionically conductive rhombohedral phase of LYZP via spray-flame synthesis. Two different solvent mixtures (e.g., 2-ethyl hexanoic acid/ethanol, propanol/propanoic acid) were chosen to explore the effect of precursor composition and combustion enthalpy on the phase composition of the nanoparticle. The as-synthesized nanoparticles from spray-flame synthesis consisted of the crystalline tetragonal zirconia (t-ZrO2) phase, while lithium, yttrium, and phosphate were present on the nanoparticles' surface as amorphous phases. However, a short annealing step (1 h) was sufficient to obtain the NASICON phase. Moreover, we have shown the gradual phase conversion from orthorhombic ß phase to rhombohedral α phase as the annealing temperature increased from 700 °C to 1300 °C (complete removal of ß phase). In this context, Y3+ doping was also crucial, along with the appropriate solvent mixture and annealing temperature, for obtaining the much-desired rhombohedral α phase. Further, 0.2 at% Y3+ doping was added to the solvent mixture of 2-ethyl hexanoic acid/ethanol, and annealing at 1300 °C for 1 h resulted in a high ionic conductivity of 1.14â10-5 S cm-1.
RESUMO
Cellulose aerogels are considered as ideal thermal insulation materials owing to their excellent properties such as a low density, high porosity, and low thermal conductivity. However, they still suffer from poor mechanical properties and low flame retardancy. In this study, mullite-fibers-reinforced bagasse cellulose (Mubce) aerogels are designed using bagasse cellulose as the raw material, mullite fibers as the reinforcing agent, glutaraldehyde as the cross-linking agent, and chitosan as the additive. The resulted Mubce aerogels exhibit a low density of 0.085 g/cm3, a high porosity of 93.2%, a low thermal conductivity of 0.0276 W/(mâK), superior mechanical performances, and an enhanced flame retardancy. The present work offers a novel and straightforward strategy for creating high-performance aerogels, aiming to broaden the application of cellulose aerogels in thermal insulation.
RESUMO
Green ammonia has become an increasingly popular fuel in recent years because of its combustion process without carbon oxide release. Adding ammonia to methane fuel for co-combustion has become one of the important research topics in the current combustion field. In the present study, the CH4/NH3/Air counterflow diffusion flame was taken as the research object, and Chemkin-2019 R3 software was used to explore and analyze the flame extinction limit and chemical kinetics characteristics under different ammonia mixing ratios, initial pressures, and air preheating temperatures. It was obtained that the flame extinction stretch rate was decreased by increasing the NH3 mole fraction in the CH4/NH3 mixed fuel. The increase in pressure or air preheating temperature would accelerate the chemical reaction rate of each component in the combustion process, increase the flame extinction limit, and counteract the "stretching effect" of the flame, thus restraining the flame extinguishing phenomenon. The results of a path analysis show that the formation and consumption of OH had an important influence on flame extinction in the chain reaction. The net reaction rate of OH increases with increasing the initial pressure or air preheating temperature, which leads to an increase in flame intensity, combustion stability, and the extinction limit. Furthermore, the function curve between the reaction influences the RIF factor and the stretch rate of the first-to-ten reactions, affected by the heat release of flame combustion, was drawn and quantitatively analyzed. Eventually, a sensitivity analysis of the flame under different working conditions was completed, which found that promoting the forward reaction R39 H + O2<=>O + OH also promotes the positive combustion as a whole when the flame was near extinction. The sensitivity coefficient of R39 in the CH4/NH3/Air flame increases with the growing initial pressure. The increasing air preheating temperature was capable of switching the reaction of R248 NH2 + OH<=>NH + H2O in the CH4/NH3/Air flame from an inhibiting reaction to a promoting reaction, while decreasing the sensitivity coefficient of inhibiting the forward reaction R10 O + CH3<=>H + CH2O, R88 OH + HO2<=>O2 + H2O, and R271 H + NO + M<=>HNO + M. Thus, the inhibition effect of flame extinction was weakened, and the positive progress of combustion was promoted.
RESUMO
Rigid polyurethane foam (RPUF) is widely utilized in construction and rail transportation due to its lightweight properties and low thermal conductivity, contributing to energy conservation and emission reduction. However, the inherent flammability of RPUF presents significant challenges. Delaying the time to ignition and preventing flame spread post-combustion is crucial for ensuring sufficient evacuation time in the event of a fire. Based on this principle, this study explores the efficacy of using potassium salts as a catalyst to promote the self-cleavage of RPUF, generating substantial amounts of CO2, thereby reducing the local oxygen concentration and delaying ignition. Additionally, the inclusion of a reactive flame retardant (DFD) facilitates the release of phosphorus-oxygen free radicals during combustion, disrupting the combustion chain reaction and thus mitigating flame propagation. Moreover, potassium salt-induced catalytic carbonization and phosphorus derivative cross-linking enhance the condensed phase flame retardancy. Consequently, the combined application of potassium salts and DFD increases the limiting oxygen index (LOI) and reduces both peak heat release rate (PHRR) and total heat release (THR). Importantly, the incorporation of these additives does not compromise the compressive strength or thermal insulation performance of RPUF. This integrated approach offers a new and effective strategy for the development of flame retardant RPUF.
RESUMO
Ammonium polyphosphate (APP) and self-made nickel phytate (PANi) were used as modified materials to prepare green biomass rigid polyurethane foam (RPUF). The flame retardancy, thermal stability, smoke toxicity and mechanical properties of the modified RPUF were investigated by limiting oxygen index (LOI), a cone calorimetry (CONE) test, thermogravimetric analysis and a compression test. The results showed that the RPUF with 10 wt% APP (PANi/APP10) had the highest LOI of 26.5%. Its peak heat release rate (PHRR) and total heat release (THR) were reduced by 29.64% and 24.05% compared with PANi/APP0 without APP. And its smoke production rate (SPR) and total smoke release (TSR) decreased by 33.14% and 19.88%, respectively. Compared with pure RPUF, the compressive strength of PANi/APP10 was increased by 50%, mainly because APP itself was an ultra-fine powder, which was better compatible with the matrix and improved the hardness of the material. The results showed that the synergistic effect of the gas phase and the condensed phase mechanism could effectively improve the flame-retardant effect. The current research results provided a new strategy for the preparation of green and low-toxicity RPUF.