RESUMO
To obtain carbon dots (CDs) with narrow full width at half maximum (FWHM) and long-wavelength emission, carbon sources with high conjugate sizes and abundant functional groups can be employed to synthesize CDs. In this study, orange-emissive carbon dots (OCDs) were synthesized with phloroglucinol and rhodamine B as precursors. When the molar ratio of them was 30:1, and ethanol was served as the solvent, OCDs with optimized emission wavelength at approximately 580 nm, an FWHM of 30 nm, and a quantum yield (QY) of 27.31% were obtained. Subsequently, the OCDs were incorporated into polyvinyl alcohol (PVA) to fabricate solid-state OCD/PVA fluorescent films, which exhibited an FWHM of 47 nm. The PVA matrix facilitated the dispersion of OCDs, thereby suppressing non-radiative energy transfer among the OCDs and enhancing luminescence efficiency. Consequently, compared with OCDs, the OCD/PVA film exhibited significant luminescent enhancement, and the QY of the composite film was increased to 84.74%. Moreover, OCD/PVA film showed good transmittance and thermal stability. This research offers a solid theoretical and experimental foundation for the potential applications of CDs in the field of solid-state lighting.
RESUMO
Fluorescent dye films on transparent substrates are essential for OLEDs, flexible displays, X-ray detection, and wireless optical communications. However, their efficiency is often hampered by fluorescence trapping due to total internal reflection (TIR) and waveguiding. This study tackles this longstanding challenge by reconceptualizing the integration of dye films with nanoantenna metasurfaces. Traditional methods involve directly spin-coating films onto c-Si metasurfaces on quartz substrates, resulting in edge luminescence and weak inner signals. We present a straightforward, adjustable approach by integrating dye films on the opposite side of quartz substrates, reaching a 2.5-fold photoluminescence enhancement and improving the uniformity of the emission compared to the conventional methods. These gains stem from redirecting a significant portion of leaked fluorescence light trapped inside the substrate into free space, surpassing TIR conditions through in-plane diffraction orders of the metasurfaces across the full RGB spectrum. Our findings facilitate the design of more efficient luminescent devices.
RESUMO
Volatile aldehydes have an adverse impact on both human health and the environment, therefore, a fast, straightforward, highly accurate detection technique for the simultaneous detection and removal of several aldehydes is eagerly anticipated. Herein, novel APGF@ZIF-8 and APOF@ZIF-8 sensing materials were developed by coating fluorescent alginate-modified surfactants (APGF and APOF) into the ZIF-8 MOFs to produce quite porous fluorescent sensors (SBET up to 1519 m2/g). The detection capacity of the prepared sensors for benzaldehyde, glyoxal, formaldehyde, and acetaldehyde has been examined. The detection mechanism was suggested as hydrogen bonding formation between the sensors and volatile aldehydes as confirmed by Gaussian calculations. All the fluorescence spectra of aldehydes display remarkable linear detection relationships in the range of 0.05-200 µM with the limits of detection (LOD) values in the range of 0.001-0.18 µM (0.106-10.44 ppb). These sensors were utilized successfully to detect multiple volatile aldehydes in river water samples with satisfactory recoveries of 96-107 %. Interestingly, fluorescent APGF@ZIF-8/CS and APOF@ZIF-8/CS films as portable disposable removal techniques for benzaldehyde, glyoxal, formaldehyde, and acetaldehyde from water were fabricated. APOF@ZIF-8/CS exhibited an excellent formaldehyde adsorption capacity of 58.30 mg/g and an adsorption removal efficiency of 93.5 %. The adsorption process of biosorbent on various aldehydes was fitted by Freundlich adsorption isotherm. The adsorption kinetics followed Pseudo-second-order kinetic model.
Assuntos
Estruturas Metalorgânicas , Poluentes Químicos da Água , Humanos , Aldeídos , Benzaldeídos , Água , Adsorção , Alginatos , Poluentes Químicos da Água/análise , Corantes , Formaldeído , Acetaldeído , GlioxalRESUMO
Zn(II) complexes possess attractive characteristics for supramolecular chemistry, catalysis, and optoelectronic applications, while Zn-Salphen counterparts are also suitable as chemical sensors, although limited by solution-based to date. In this study, we report the synthesis of new polymers from methyl methacrylate, n-butyl acrylate, and a non-symmetrical Zn-Salphen complex. We show that this low-fluorescent complex exhibits aggregation-induced emission enhancement (AIEE) properties and that, the incorporation of AIEE complexes into a polymeric matrix make it possible to achieve fluorescent films with enhanced fluorescence suitable for sensing applications. As a proof of concept, these films could detect acetic acid, showing a decrease of up to 73% in the original fluorescence. Host/guest studies showed a subtle disruption of the emission in aggregates upon treatment with anion guests. These results indicate that an interaction between the guest and Zn-Salphen complex may occur, stabilizing or destabilizing the complex and causing a concomitant increase or decrease in emission.
RESUMO
The construction of metal-organic framework (MOF) films is a crucial step for integrating them into technical applications. However, due to the crystallization nature, it is difficult to grow most MOFs spontaneously or process them into films. Here, a convenient strategy is demonstrated for constructing MOF films by using modulators to achieve homogeneous assembly of MOF clusters. Small clusters in the early growth steps of MOFs can be stabilized by modulators to form fluidic precursors with good processibility. Then, simple removal of modulators will trigger the crosslinking of MOF clusters and lead to the formation of continuous films. This strategy is universal for the fabrication of several types of MOF films with large scale and controllable thickness, which can be deposited on a variety of substrates as well as can be patterned in micro/nano resolution. Additionally, versatile composite MOF films can be easily synthesized by introducing functional materials during the crosslinking process, which brings them broader application prospects.
RESUMO
Two kinds of carbon dots (CDs) with different solubility, aqueous soluble CDs (ACDs) and organic soluble CDs (OCDs), were produced at the same time by one step hydrothermal synthesis method using sorbic acid and proline as carbon precursor and nitrogen dopant, respectively. The synthesized CDs were characterized by means of UV, fluorescence, TEM, elemental analysis, IR and XPS et al. Based on the effective and proportional fluorescence quenching by Cr(VI), ACDs were successfully used as a high sensitive and selective probe for Cr(VI) detection. Internal filtration effect (IFE) played an important role in the quenching process. Under the optimal conditions, linear response for Cr(â ¥) was observed in the range of 0.5-100⯵mol/L, and the calculated detection limit was 34â¯nmol/L. The method has been satisfactorily applied to detect Cr(VI) ions in real water samples of our campus. Then, the ACDs were further applied for cell imaging in B16F10â¯cells. Furthermore, OCDs were well dispersed into PMMA to fabricate OCDs/PMMA composites as fluorescent films.
RESUMO
A novel electro-active compound, TCAC, is synthesized and its electrochemical polymerized film is used to detect 2,4,6-trinitrotoluene (TNT) and 2,4-dinitrotoluene (DNT) explosives through a fluorometric/electrochemical dual-channel sensor with high sensitivity and selectivity. In particular, the electrochemical sensor for the analysis of TNT had an enhanced sensitivity of 0.5â µM. The detection limit of the sensor was calculated to be 15â nM.