Efficient photocatalytic H2O2 production and photodegradation of RhB over K-doped g-C3N4/ZnO S-scheme heterojunction.

Designing efficient dual-functional catalysts for photocatalytic oxygen reduction to produce hydrogen peroxide (H2O2) and photodegradation of dye pollutants is challenging. In this work, we designed and fabricated an S-scheme heterojunction (g-C3N4/ZnO composite photocatalyst) via one-pot calcination of a mixture of ZIF-8 and melamine in the KCl/LiCl molten salt medium. The KCN/ZnO composite produced 4.72 mM of H2O2 within 90 min under illumination (with AM 1.5 filter), which is almost 1.3 and 7.8 times than that produced over KCN and ZnO, respectively. Simultaneously, the KCN/ZnO also showed excellent photodegradation performance for the dye pollutants (Rhodamine B, RhB), with a removal rate of 92 % within 2 h. The apparent degradation rate constant of RhB over KCN/ZnO was approximately 5-8 times that of KCN and ZnO. In the photocatalytic process, photo-generated holes and superoxide radicals are the main active species. Oxygen (O2) was mainly reduced to produce H2O2 via a two-electron (2e-) pathway with superoxide radicals as intermediates and the 2e- oxygen reduction reaction selectivity of KCN/ZnO was close to 69.82 %. Photo-generated holes are mainly responsible for the degradation of RhB. Compared with pure KCN and ZnO, the enhanced photocatalytic activity of the KCN/ZnO composite is mainly attributed to the following aspects: 1) larger specific surface area and pore volume is beneficial to expose more active sites; 2) stronger light harvesting ability and red-shifted absorption edge bestow the compound a stronger light utilization efficiency; 3) the construction of S-scheme heterostructure between KCN and ZnO improve the photogenerated electron-hole pairs separation ability and bestow photogenerated carriers a higher redox potential.

Constructing homo/hetero-nuclear carbon and oxygen atoms co-doped graphitic carbon nitride assisted by ionic liquid for photothermal synergistic catalytic oxidation of cyclohexane.

The adoption of photothermal synergistic catalysis for cyclohexane oxidation can balance the advantages of high conversion of thermal catalysis and high selectivity of photocatalytic technology to achieve better catalytic performance. Here, we prepared functional carbon nitride (BCA-CN) by self-assembly strategy of ionic liquid [Bmim]CA (1-Butyl-3-methylimidazole citrate) with melamine and cyanuric acid utilizing abundant elements and anionic/cationic hydrogen bonding interactions. The introduction of [Bmim]CA embeds C-C (carbon and carbon band) and C-O-C (ether bond) structures into graphitic carbon nitride (g-C3N4) framework, significantly improving light absorption capacity and migration of photo generated charge carriers. Compared to g-C3N4, both BCA-CN increases cyclohexane conversion and KA oil (the mixture of cyclohexanol and cyclohexanone) selectivity by 1.3 times under photothermal catalysis. The surface reactions are facilitated by changing adsorption sites of cyclohexane to increase adsorption energy and obtaining more hydroxyl radicals and superoxide radicals. Furthermore, the enhanced selectivity is attributed to the difficulty in generating cyclohexanone radicals. This work offers the reference scheme for the development of efficient photothermal catalysts in the selective oxidation of cyclohexane.

Identifying Putative Biomarkers of Foodborne Pathogens Using a Metabolomic Approach.

Metabolomics is the study of low molecular weight biochemical molecules (typically <1500 Da) in a defined biological organism or system. In case of food systems, the term "food metabolomics" is often used. Food metabolomics has been widely explored and applied in various fields including food analysis, food intake, food traceability, and food safety. Food safety applications focusing on the identification of pathogen-specific biomarkers have been promising. This chapter describes a nontargeted metabolite profiling workflow using gas chromatography coupled with mass spectrometry (GC-MS) for characterizing three globally important foodborne pathogens, Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella enterica, from selective enrichment liquid culture media. The workflow involves a detailed description of food spiking experiments followed by procedures for the extraction of polar metabolites from media, the analysis of the extracts using GC-MS, and finally chemometric data analysis using univariate and multivariate statistical tools to identify potential pathogen-specific biomarkers.

A comparison increasing the photodegradation power of a Ag/g-C3N4 /CoNi-LDH nanocomposite: Photocatalytic activity toward water treatment.

For environmental applications, it is crucial to rationally design and synthesize photocatalysts with positive exciton splitting and interfacial charge transfer. Here, a novel Ag-bridged dual Z-scheme Ag/g-C3N4/CoNi-LDH plasmonic heterojunction was successfully synthesized using a simple method, with the goal of overcoming the common drawbacks of traditional photocatalysts such as weak photoresponsivity, rapid combination of photo-generated carriers, and unstable structure. These materials were characterized by XRD, FT-IR, SEM, TEM UV-Vis/DRS, and XPS to verify the structure and stability of the heterostructure. The pristine LDH, g-C3N4, and Ag/g-C3N4/CoNi-LDH composite were investigated as photocatalysts for water remediation, an environmentally motivated process. Specifically, the photocatalytic degradation of tetracycline was studied as a model reaction. The performance of the supports and composite catalyst were determined by evaluating both the degradation and adsorption phenomenon. The influence of several experimental parameters such as catalyst loading, pH, and tetracycline concentration were evaluated. The current study provides important data for water treatment and similar environmental protection applications.

Advancing antibiotic detection and degradation: recent innovations in graphitic carbon nitride (g-C3N4) applications.

The uncontrolled release of antibiotics into the environment would be extremely harmful to human health and ecosystems. Therefore, it is in urgent need to monitor the environment and promote the detection and degradation of antibiotics to the relatively harmless by-products to a feasible extent. Graphitic carbon nitride (g-C3N4) is a non-metallic n-type semiconductor that can be used for the antibiotic detection and degradation due to its easy synthesis process, excellent chemical stability and unique optical properties. Unfortunately, the utilization of visible light, electron-hole recombination and electron conductivity have hindered its potential applications in the fields of photocatalytic degradation and electrochemical detection. Although previous publications have highlighted the diverse modification methods for the g-C3N4-based materials, the underlying structure-performance relationships of g-C3N4, especially for the detection and degradation of antibiotics, remains to be further explored. In view of this, the current review centered on the recent progress in the modification techniques of g-C3N4, the detection and degradation of antibiotics using the g-C3N4-based materials, as well as the potential antibiotic degradation mechanisms of the g-C3N4-based materials. Additionally, the underlying applications of the g-C3N4-based materials for antibiotic detection and degradation were also prospected. This review would provide a valuable research foundation and the up-to-date information for the g-C3N4-based materials to combat antibiotic pollution in the environment.

Effect of UV-C Irradiation on Growth, Photosynthetic Pigments, and Lipid Profile of Chlorella sorokiniana.

Chlorella sorokiniana holds significant industrial relevance owing to its lipid profile. Consequently, the objective of this investigation was to enhance growth, lipid content, and photosynthetic pigment production through the application of UV-C irradiation. The growth parameters of microalgae demonstrated an increase in response to concentration. After 35 days of incubation, cells exposed to UV-C for 8 min produced the most biomass at 2.2 g/l. Additionally, the chlorophyll content demonstrated a comparable pattern, with the highest concentrations of chlorophyll a (4.99 mg/l), chlorophyll b (6.22 mg/l), and total chlorophyll (11.21 mg/l) observed in cells incubated for 35 days and exposed to UV-C for 8 min. The lipid profile, nevertheless, demonstrated minor fluctuations. Specifically, the relative abundance of frequently occurring lipid compounds was found to be greater in cells treated with UV-C compared to the control group, and the most significant increase was obtained in 15-day culture exposed to UV-C for 8 min. However, after 35 days of incubation, this abundance decreased in cells exposed to UV-C for more than 4 min. Additionally, the observation of specific lipid compounds presented solely in cells obtained from algal cultures treated with UV-C was made. Consequently, drawing from the results obtained in the current investigation, it is possible to deduce that UV-C can be utilised to augment the overall development and yield of significant metabolites in microalgae. Furthermore, these microalgae can be converted into single-cell bioreactors to facilitate the production of lipids utilised in a variety of applications, a process that could be refined to cater to industrial demands.

Phytochemical Profiling and Bioactive Properties of Essential Oils from Endemic Palestinian Satureja thymbrifolia.

Despite several studies on the Satureja L. genus, the chemical composition and biological activities of the traditional medicinal plant Satureja thymbrifolia (White Thyme), a Palestinian endemic species, are still unknown. It grows in arid regions and is used by Bedouins as a traditional medicinal herb. This study aimed to investigate S. thymbrifolia essential oils (EOs), mainly from its phytochemical pattern and biological properties. The GC-MS study identified p-cymene (48.53%) and thymol (23.27%) as the leading EOs components. Compared to Trolox, the EOs showed potential anti-DPPH free radical activity and had broad-spectrum antimicrobial potentials, with MIC values ranging from 0.13 ± 0.05 to 25 ± 0.00 µL/mL. They were most effective against Candida albicans species. The S. thymbrifolia EOs most effectively eliminated cancer cells when tested against CaCo-2 and HeLa cell lines (IC50 values of 192.15 ± 2.47 and 194.80 ± 1.87 µg/mL, respectively). The present investigation is the first documented study of S. thymbrifolia EOs' phytochemical composition and bioactivities. The results revealed that S. thymbrifolia EOs have potential antioxidant, antimicrobial, and cytotoxic effects. These outcomes emphasized S. thymbrifolia EO's potential dietary, pharmacological, and cosmetic applications.

Analysis and discrimination of adhesive species using ATR-FTIR combined with Raman, and HS-GC-IMS together with multivariate statistical analysis.

Identifying the species and origin of adhesives in criminal investigations aids in narrowing inquiry scope and supporting case detection. This study introduces two advanced combined analytical techniques for distinguishing adhesive species, including attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) combined with Raman spectroscopy, and headspace gas chromatography-ion mobility spectrometry (HS-GC-IMS) together with multivariate statistical analysis. ATR-FTIR categorized seven adhesives into three groups based on the base materials, with further differentiation achieved via Raman spectra. Analysis of volatile components identified 79 volatile organic compounds (VOCs), with esters being the most concentrated. The fingerprint profile clearly illustrated the characteristic fingerprint sequence and unique marker compounds of each adhesive, effectively enabling their differentiation. Multivariate statistical analysis methods, including principal component analysis (PCA), orthogonal partial least squares-discriminant analysis (OPLS-DA), heatmap, and hierarchical cluster analysis (HCA), were utilized to visually interpret the classification of adhesives. This integrated analytical approach provides a comprehensive analysis of adhesive compositions, facilitating the diversification and precision of adhesive species identification, and broadening the scope for detecting and analyzing trace evidence in forensic science.

Oxygen Vacancies Regulated S-Scheme Charge Transport Route in BiVO4-OVs/g-C3N4 Heterojunction for Enhanced Photocatalytic Performance.

Oxygen vacancies (OVs) are widely considered as active sites in photocatalytic reactions, yet the crucial role of OVs in S-scheme heterojunction photocatalysts requires deeper understanding. In this work, OVs at hetero-interface regulated S-scheme BiVO4-OVs/g-C3N4 photocatalysts are constructed. The Fermi-level structures of BiVO4 and g-C3N4 lead to a redistribution of charges at the heterojunction interface, inducing an internal electric field at the interface, which tends to promote the recombination of photogenerated carriers at the interface. Importantly, the introduction of OVs induces defect electronic states in the BiVO4 bandgap, creating indirect recombination energy level that serves as crucial intermediator for photogenerated carrier recombination in the S-scheme heterojunction. As a result, the photocatalytic degradation rate on Rhodamine B (RhB) and tetracyclines (TCs) for the optimal sample is 10.7 and 11.8 times higher than the bare one, the photocatalytic hydrogen production rate is also improved to 558 µmol g-1 h-1. This work shows the importance of OVs in heterostructure photocatalysis from both thermodynamic and kinetic aspects and may provide new insight into the rational design of S-scheme photocatalysts.

Construction of S-scheme g-C3N4/PbTiO3 heterojunction and its highly efficient photocatalytic degradation of organic pollutants under simulated sunlight.

This study successfully synthesized a composite photocatalyst g-C3N4/PbTiO3 through hydrothermal and calcination methods using PbTiO3 and g-C3N4. The catalyst was characterized by XRD, FTIR, Raman, XPS, SEM, TEM, UV-vis DRS, PL, and other techniques. The results indicate that the composite photocatalyst exhibits efficient electron transfer, enhanced light absorption, effective separation and utilization of photogenerated electron-hole pairs, demonstrating superior photocatalytic activity. Under simulated sunlight, the removal efficiency of methyl blue (MB) with an initial concentration of 10 mg/L reaches 93.0% after 120 min. After five cycles, the degradation efficiency of MB is 79.2%, still maintaining 85% of the initial catalytic activity. The pH values in the range of 4.0-7.0, inorganic anions, and water quality have a minimal impact on the photocatalytic degradation of MB. Additionally, the composite photocatalyst exhibits strong removal capabilities for other pollutants, such as tetracycline. Therefore, the prepared catalyst demonstrates good feasibility for practical applications. Free radical quenching experiments indicate that hydroxyl radicals (·OH) are the primary active groups in the photocatalytic degradation of MB. Based on this, a photocatalytic mechanism involving a S-scheme heterojunction has been proposed. This study provides new insights into preparing PbTiO3 composite semiconductors and constructing novel S-scheme heterojunctions.

Development of an Untargeted Method for the Analysis of the Volatile Profile of Onions via Solid-Phase Microextraction Arrow-Headspace-Gas Chromatography-Mass Spectrometry Using Design of Experiments.

The distinctive aroma of onions, consisting primarily of sulfur-containing compounds, is one of the reasons for the popularity of the vegetable. The rapid enzymatic and chemical reactions that occur after the destruction of onion bulb tissue render the analysis of the volatile profile challenging. Therefore, sample preparation is a crucial step in the analysis of the onion volatilome, but it often does not receive the necessary attention in the literature. In this work, we focused on two aspects: Firstly, we compared different sample preparation approaches to maximize the volatile yield and to enable the description of the onion volatile profile as it would emerge after a solid-phase microextraction (SPME) Arrow sampling procedure. For headspace (HS)-gas chromatography-mass spectrometry analysis, onion juice with the addition of an ammonium sulfate solution proved to be the best option. Secondly, we optimized the HS sampling and desorption parameters (enrichment time, enrichment temperature, agitator speed, desorption time) for onion volatiles using the efficient design of experiments (DoE) approach. The optimal conditions for the analysis with HS-SPME Arrow were an enrichment time of 75 min at 60°C with an agitator speed of 713 rpm and a desorption time of 120 s.

Subchronic Toxicity of Mineral Oil Saturated Hydrocarbons (MOSH) in Relation to Its Carbon Number Range and Gender of Fischer F344 Rats.

In this work, the paraffin oil was first molecularly distilled into two mineral oil saturated hydrocarbons (MOSH) subfractions with their main carbon number range of C20-30 (84.58%) and C30-50 (89.65%), which were determined using a liquid chromatography-gas chromatography-flame ionization detector (LC-GC-FID) technique. Then, both female and male Fischer 344 (F344) rats were fed with the diets containing one of these two MOSH subfractions at the low (1.5 g/kg) or high dose (15 g/kg) for 6 months. It was found that the exposure of MOSH C20-30 subfraction could result in a significant increase of spleen weight index (4.64 ± 0.18 mg/g for female and 3.79 ± 0.31 mg/g for male rats) (P < 0.05), and irregular shape of white medulla, and the macrophage infiltration in mesenteric lymph node for both female and male rats, especially for the 15 g/kg MOSH C20-30-fed rats. Meanwhile, both MOSH C20-30 and C30-50 subfraction promoted inflammation and oxidative stress and had a negative effect on the immune function in both female and male rats. The metabolomics results further supported these observations, and indicated the down-regulation of cysteine and methionine metabolism, and glutathione metabolism pathway in female and male rats, respectively.

Diversity of culturable bacterial isolates and their potential as antimicrobial against human pathogens from Afar region, Ethiopia.

Antimicrobial resistance is a growing global concern exacerbated by the scarcity of new medications and resistance to current antibiotics. Microbes from unexplored habitats are promising sources of natural products to combat this challenge. This study aimed to isolate bacteria producing secondary metabolites and assess their antimicrobial efficacy against human pathogens. Soil and liquid samples were collected from Afar region, Ethiopia. Bacterial isolates were obtained using standard serial dilution techniques. Antimicrobial activity was evaluated using agar plug and well diffusion methods. matrix-assisted laser desorption/ionization time-of-flight-mass spectrometry (MALDI-TOF MS) and whole-genome sequencing (WGS) were conducted for the isolate exhibiting the highest antimicrobial activity. Secondary metabolites were extracted and analyzed using gas chromatography-mass spectra (GC-MS). In this study, 301 bacteria isolates were identified, of which 68 (22.6%) demonstrated antagonistic activity against at least one reference pathogen. Whole-genome sequencing revealed that Sl00103 belongs to the genus Bacillus, designated as Bacillus sp. Sl00103. The extract of Sl00103 showed zones of inhibition ranging between 17.17 ± 0.43 and 26.2 ± 0.4 mm against bacterial pathogens and 19.5 ± 0.44 to 21.0 ± 1.01 mm against Candida albicans. GC-MS analysis of ethyl acetate and n-hexane extracts identified major compounds including (R,R)-butane-2,3-diol; 3-isobutylhexahydropyrrolo[1,2a] pyrazine-1,4-dione; cyclo(L-prolyl-L-valine); and tetradecanoic acid, 12-methyl-, methyl ester; hexadecanoic acid, methyl ester among other. In conclusion, this study isolated several promising bacterial strains from the Afar region in Ethiopia, with strain Sl00103 (Bacillus sp. Sl00103) demonstrating notable antimicrobial and antioxidant activities and warranting further studies. IMPORTANCE: Antimicrobial resistance (AMR) is an escalating global health threat affecting humans, animals, and the environment, underscoring the urgent need for alternative pathogen control methods. Natural products, particularly secondary metabolites from bacteria, continue to be a vital source of antibiotics. However, microbial habitats and metabolites in Africa remain largely unexplored. In this study, we isolated and screened bacteria from Ethiopia's Afar region, characterized by extreme conditions like high temperatures, volcanic activity, high salinity, and hot springs to identify potential bioactive compounds. We discovered diverse bacterial isolates with antimicrobial activity against various pathogens, including strain Sl00103 (Bacillus sp. Sl00103), which demonstrated significant antimicrobial and antioxidant activities. GC-MS analysis identified several antimicrobial compounds, highlighting strain Sl00103 as a promising source of secondary metabolites with potential pharmaceutical applications and warranting further investigation.

In vitro anti-inflammatory, anticancer effects and phytochemical characterisation of organic extracts from Aristolochia olivieri Colleg. ex Boiss.

Natural extract plays a crucial role in our lives, major compound in the n-hexane (AR-H) and the ethyl acetate (AR-E) Aristolochia olivieri extracts was n-hexadecanoic acid, and of the methanol extract (AR-M) was pentacosane. The AR-M extract had a strong ability to induce mRNA expression of an inflammatory cytokine, IL-6, as an M1-like macrophage subset compared to the negative control (DMSO-treated cells). In contrast, AR-E treatment showed strong anti-inflammatory activity against macrophages. The AR-H extract had a moderate inflammatory effect against macrophages. The IC50 results of the anticancer assays ranged from 58.29 to 451.03 µg/mL for the three extracts. The anticancer action of the AR-E extract against U-87MG cells was higher (58.29 µg/mL) than that of AR-H and AR-M (156.38 and 196.14 µg/mL, respectively). The greater cytotoxicity effect observed with the AR-E extract against U-87MG can be linked to its high content of hexadecanoic acid (32.49%) and linolenic acid (12.90%).

Comparative Evaluation of GC Gold Label IX with GC Gold Label IX Extra and GC Gold Label Hybrid in Cavitated Lesions Prepared by Hand Instrumentation Technique in Primary Molars: An In Vivo Study.

Aim: The purpose of the present study was to compare the clinical efficacy of GC Gold Label IX, GC Gold Label IX Extra, and GC Gold Label Hybrid in occlusal surface cavities in primary molars prepared by hand instrumentation technique. Materials and methods: Ninety primary molars were selected from the children according to the inclusion and exclusion criteria. The selected teeth were randomly allocated into the following three groups, with 30 teeth in each group, according to the restorative material used: group I: GC Gold Label IX, group II: GC Gold Label IX Extra, and group III: GC Gold Label Hybrid. Occlusal cavities were prepared using hand instruments. Caries removal efficacy was verified using caries detector dye. The restorative materials were mixed and condensed into the prepared cavities. The restorations were assessed using modified United States Public Health Service (USPHS) evaluation criteria at 1, 3, and 6 months. Results: The results were tabulated and statistically analyzed using the Chi-squared test. No significant difference was found in terms of color match, marginal discoloration, marginal integrity, surface roughness, and secondary caries, but a significant difference was observed in terms of retention and anatomic form between group I and group III. Conclusion: GC Gold Label Hybrid exhibited better clinical performance with respect to GC Gold Label IX and comparable clinical performance with respect to GC Gold Label IX Extra. Clinical significance: GC Gold Label Hybrid is a newly developed glass ionomer cement (GIC), and its clinical performance needs to be studied. How to cite this article: Mittal M, Bajaj N, Bhola M, et al. Comparative Evaluation of GC Gold Label IX with GC Gold Label IX Extra and GC Gold Label Hybrid in Cavitated Lesions Prepared by Hand Instrumentation Technique in Primary Molars: An In Vivo Study. Int J Clin Pediatr Dent 2024;17(5):570-575.

Efficient and low-complexity variable-to-variable length coding for DNA storage.

BACKGROUND: Efficient DNA-based storage systems offer substantial capacity and longevity at reduced costs, addressing anticipated data growth. However, encoding data into DNA sequences is limited by two key constraints: 1) a maximum of h consecutive identical bases (homopolymer constraint h), and 2) a GC ratio between [ 0.5 - c GC , 0.5 + c GC ] (GC content constraint c GC ). Sequencing or synthesis errors tend to increase when these constraints are violated. RESULTS: In this research, we address a pure source coding problem in the context of DNA storage, considering both homopolymer and GC content constraints. We introduce a novel coding technique that adheres to these constraints while maintaining linear complexity for increased block lengths and achieving near-optimal rates. We demonstrate the effectiveness of the proposed method through experiments on both randomly generated data and existing files. For example, when h = 4 and c GC = 0.05 , the rate reached 1.988, close to the theoretical limit of 1.990. The associated code can be accessed at GitHub. CONCLUSION: We propose a variable-to-variable-length encoding method that does not rely on concatenating short predefined sequences, which achieves near-optimal rates.

Photocatalytic activity of self-heterojunctioned intermediate phases in HCl protonated and HNO3 deconjugated g-C3N4 nanostructures.

This research involved the different acid-treatment conditions of graphitic carbon nitride and its modified nanostructures through thermal polycondensation of urea at various temperatures. X-ray diffraction patterns revealed that processing at a lower temperature than 500 °C resulted in melem and its derivatives, indicating incomplete transformation of urea to g-C3N4. However, treatment at higher temperatures and the HCl acid treatment led to the formation and expansion of g-C3N4 networks, as evidenced by notable differences in peak intensities observed in their Fourier-transform infrared and Raman spectra. Scanning electron microscopy analysis illustrated a transition from the granular morphology of melamine to the layered structure characteristic of g-C3N4. The nanoparticle morphology observed in the HNO3 acid treatment sample was attributed to the deconjugation of nanosheets through the highly oxidative acid medium. The most suitable photocatalytic activity for Methylene Blue (MB) degradation under UV and visible light illumination was observed for the samples prepared at 550 °C and HCl post-processed nanostructures. It is proposed that the enhanced photocatalytic activity observed in these samples is most likely attributed to the reduced recombination of photogenerated charge carriers facilitated by heterojunctions formed between different intermediate phases. These findings highlight the potential of modified g-C3N4 and its derivatives as promising photocatalytic materials for water purification applications.

Utilization of opium poppy seed oil for biodiesel production: A parametric characterization and statistical optimization.

Consuming traditional petroleum-derived diesel fuel has long been associated with issues such as the depletion of natural energy resources. To solve these challenges, an alternate source like as biodiesel is an appealing option. Seed oils have long been recognized as an abundant and diverse source of biodiesel. In this study, poppy seed oil from the poppy (Papaver somniferum) was investigated for biodiesel production. Poppy seed biodiesel was generated and refined using acid-pretreated esterification with sulphuric acid prior to transesterification, as well as single-step alkaline catalyzed transesterification with methanol and potassium hydroxide. Finally, the percentage yield was compared. Using Statistica, the Box-Behnken design was applied to optimize process variables like time, temperature, catalyst concentration, and methanol-oil ratio to produce maximum yield. The relationship of process variables was also shown with the help of the Response Surface Methodology. A maximum yield of 94.87 % was obtained at optimized conditions, i.e., 90min reaction time, 60 °C of temperature, 0.25 mg of catalyst concentration, and 3v/v% alcohol-oil ratio. The fuel properties of biodiesel produced, such as acid value, moisture content, saponification value, iodine value, specific gravity, percentage of free fatty acids, refractive index, viscosity, boiling point, and peroxide value, were measured and compared with the American Society for Testing and Materials (ASTM) D6751 and European Standards (EN) 14214. Further results were studied and discussed using Fourier Transfer Infrared (FTIR) analysis, which showed maximum similarity of raw material to formed biodiesel. Gas Chromatography-Mass Spectrometry (GC-MS) analysis was performed to identify and quantify various fatty acid methyl esters. The results obtained were in accordance with various international standards for biodiesel fuel. Thus, poppy seeds can be used to obtain biodiesel.

Revealing the backbone structures of land-based fulvic acids derived from river and soil through n-butylsilane reduction.

While ultra-high-resolution mass spectrometry has enabled the identification of the molecular composition of dissolved organic matter (DOM), elucidating its molecular structure remains a challenging endeavor. Here, two fulvic acids (FAs), one from river and the other from forest soil, were subjected to reduction using an optimized n-butylsilane (n-BS) reduction method. The reduction products were purified through a combination of liquid-liquid extraction and silica gel column chromatography, resulting in the separation into saturates, aromatics, and polar products. The polar products were analyzed by high-resolution mass spectrometry (HRMS), and the saturates and aromatics were analyzed using gas chromatography-mass spectrometry (GC-MS). HRMS results showed that the number of oxygen atoms and double-bond equivalent (DBE) values of FA decreased after reduction. GC-MS results revealed that a total of 270 hydrocarbon monomers were identified from the reduction products of a single sample, with the highest carbon number of cycloalkanes reaching C33. For the first time, steranes and hopanes were detected in the reduction products, potentially serving as evidence for the existence of carboxyl-rich alicyclic molecule (CRAM) precursors. Additionally, a significant number of polycyclic aromatic hydrocarbons were identified, and the potential sources of various compounds were preliminarily inferred based on their isomers. This study extends the knowledge of the possible backbone structure of the DOM and provides a new potential tool for investigating the origin and transformation mechanisms of DOM.

Ecotoxicological and metabolomic investigation of chronic exposure of Daphnia magna (Straus, 1820) to yttrium environmental concentrations.

In order to estimate the effects on aquatic organisms of long-term exposure to low doses of yttrium (Y) as a potential emerging contaminant, ecotoxicological and metabolomic data were collected on the model organism Daphnia magna, a keystone species in freshwater ecosystems. Following an initial acute toxicity assessment, a 21-day chronic exposure experiment was conducted using a sublethal concentration of 27 µg L⁻¹ of Y, corresponding to the effective concentrations inducing 10 % effect (EC10) value for mortality endpoint and simulating the environmental Y level in aquatic systems. Results from the 21-day two-factor experiment combining microcrustacean survival, growth and reproduction bioassays and targeted gas chromatography-mass spectrometry (GC-MS) metabolomics indicated significant adverse effects of chronic exposure to Y on D. magna. Daphnids exposed to Y exhibited a significantly lower survival at day 21, delayed the maturity stage, including their first breeding, and decreased clutch size. On the side of metabolomics, a clear and general increase over time of both the number and the level of detected metabolites in the hydroalcoholic extracts of the whole organisms was observed. However, emerging from this broad temporal pattern, several bioactive metabolites were identified (e.g., 2,4-di­tert­butylphenol, itaconic acid, 3-hydroxybutyric acid, and trehalose) whose levels in extracts are linked to the presence of Y. These results emphasize the necessity of considering low-dose, long-term exposure scenarios in environmental risk assessments of rare earth elements (REEs), which have often been overlooked in favour of higher concentration studies.