Aerial and terrestrial root habits influence the composition of the cell walls of Vanilla phaeantha (Orchidaceae).

In response to the restrictions imposed by their epiphytic habit, orchids have developed structural traits that allow greater efficiency in water uptake and use, such as a complex adventitious root system with velamen. The composition of cell wall of this specialized epidermis can be altered according to the substrate to which it is fixed, influencing wall permeability, absorption, and storage of water in roots. The current study aimed to evaluate the cell wall composition of adventitious roots of Vanilla phaeantha (Orchidaceae) that grow attached to the phorophyte, fixed in the soil, or hung free. Immunocytochemical analyses were used to determine the protein, hemicellulose, and pectin composition of the cell walls of aerial and terrestrial roots. We observed that pectins are present in the different tissues of the aerial roots, while in the terrestrial roots, they are concentrated in the cortical parenchyma. The deposition of xyloglucans, extensins, and arabinogalactans was greater in the epidermis of the free side of the roots attached to the phorophyte. The strong labeling of pectins in aerial roots may be related to the influx of water and nutrients, which are generally scarce in this environment. The arrangement of hemicelluloses and proteins with the pectins may be associated with increased cell rigidity and sustainability, a feature of interest for the aerial roots. In summary, the habit of roots can interfere with the non-cellulosic composition of the cell walls of V. phaeantha, possibly related to changes in cell functionality.

Adsorption study on the formation of interfacial layers based on birch glucuronoxylans.

Glucuronoxylans (GX), particularly crude fractions obtained by pressurized hot water extraction of birch wood, act as potent emulsifiers and stabilizers against physical separation and lipid oxidation. Herein, we studied the adsorption of GX on hydrophobic interfaces to correlate their multicomponent character towards the formation of interfacial layers in emulsions. Dynamic interfacial tension (DIFT) and quartz crystal microgravimetry with dissipation monitoring (QCM-D) were applied to various GX fractions and the results compared with those from cellulose-based emulsifiers. The roles of residual lignin and polysaccharides are discussed considering the formation of interfacial layers during emulsification. The DIFT of the different GXs reached quasi-equilibrium faster as the lignin concentration increased, implying a correlation between the rate of adsorption and the residual lignin content. The effect of NaCl addition was more pronounced in polysaccharide-rich fractions, indicating that the polysaccharide fraction modulated the effect of ionic strength. QCM-D showed that despite the fast adsorption exhibited by the lignin-rich GX extract in the DIFT curves, the adsorbed materials were lightweight, suggesting that the polysaccharide fraction built the bulk of the interfacial layer. These results provide a foundation towards understanding the role of GX in interfacial stabilization beyond traditional plant-based counterparts.

A nanoformulation of cisplatin with arabinoxylan having enhanced activity against hepatocellular carcinoma through upregulation of apoptotic and necroptotic pathways.

Cisplatin is a versatile drug used to treat various types of cancer, but it is associated with high toxicity and resistance problems. Several approaches, including nanotechnology, have been adopted to minimize the toxic effects and to overcome the resistance of cisplatin. Most of the nanoformulations involve the use of synthetic or semisynthetic polymers as drug carriers. In this study arabinoxylan nanoparticles have been investigated as drug reservoirs for intestinal drug delivery. The drug-loaded arabinoxylan nanoparticles (size: ∼1.8 nm, polydispersity index: 0.3 ± 0.04) were prepared and nanoformulation was characterized by various analytical techniques. The nanoformulation was found to be stable (zeta potential: 31.6 ± 1.1 mV). An in vitro cytotoxicity against HepG2 and HEK 293 cell lines was studied. The cell viability analysis showed greater efficacy than the standard cisplatin (IC50: cisplatin 2.4, arabinoxylan nanoformulation 1.3 µg mL-1). The expression profile of carcinogenic markers revealed a six-fold upregulation of MLKL and 0.9-fold down regulation of KRAS, suggesting the activation of the necroptotic pathway by the drug-loaded nanoparticles. The nanoformulation exhibited a sustained release of cisplatin with a cumulative release of ∼40 % (at pH 7.4) and ∼30 % (at pH 5.5) over a period of 12 h with very low initial burst. The study suggests that the use of the new nanoformulation can significantly reduce the required dose of cisplatin without compromising efficacy and more efficient release at basic pH.

Implications of cell wall immunocytochemical profiles on the structural and functional traits of root and stem galls induced by Eriosoma lanigerum on Malus domestica.

Alterations in cell wall composition imply in new structural and functional traits in gall developmental sites, even when the inducer is a sucking exophytophagous insect with strict feeding sites as the aphid associated to Malus domestica Borkh. This host plant is an economically important, fruit-bearing species, susceptible to gall induction by the sucking aphid Eriosoma lanigerum Hausmann, 1802. Herein, the immunocytochemical detection of arabinogalactan-proteins (AGPs), pectins, and hemicelluloses using monoclonal antibodies was performed in samples of non-galled roots and stems, and of root and stem galls on M. domestica. The dynamics of these cell wall components was discussed under the structural and functional traits of the galls proximal, median, and distal regions, according to the proximity of E. lanigerum colony feeding site. In the proximal region, the epitopes of AGPs and homogalacturonans (HGs) are related to cell growth and divisions, which result in the overproduction of parenchyma cells both in root and stem galls. In the proximal and median regions, the co-occurrence of HGs and arabinans in the cell walls of parenchyma and secondary tissues favors the nutrient flow and water-holding capacity, while the xylogalacturonans and hemicelluloses may function as additional carbohydrate resources to E. lanigerum. The immunocytochemical profile of the cell walls support the feeding activity of E. lanigerum mainly in the gall proximal region. The similarity of the cell wall components of the gall distal region and the non-galled portions, both in roots and stems, relates to the decrease of the cecidogenetic field the more distant the E. lanigerum colony is.

Selectively fractionate hemicelluloses with high molecular weight from poplar thermomechanical pulp by tetramethylammonium hydroxide.

Selective fractionation of hemicelluloses is of great significance for realizing high-value application of hemicelluloses and comprehensive utilization of lignocellulosic biomass. Tetramethylammonium hydroxide (TMAH) solvent has been confirmed as a promising solvent to selectively fractionate hemicelluloses from holocellulose. Herein, TMAH solvent was adopted to pretreat poplar thermomechanical pulp (PTMP) for the selective fractionation of hemicelluloses and enhancement of enzymatic hydrolysis performance of residues. The maximal hemicelluloses yield (65.0 %) and excellent cellulose retention rate (93.3 %) were achieved after pretreatment by the 25 wt% TMAH solvent, while the delignification was only 33.9 %. The hemicelluloses fractions could be selectively fractionated with high molecular weights (109,800-118,500 g/mol), the contents of Klason lignin in them were low (3.2-5.9 %), and the dominating structure of them was 4-O-methylglucurono-ß-D-xylan. Compared to the H2SO4 and NaOH methods, the hemicelluloses fractionated by TMAH method exhibited higher yields, more complete structures and higher molecular weights. Furthermore, the crystalline structure of cellulose practically remained stable, and the highest yield of enzymatic hydrolysis glucose was 57.5 %, which was 3.3 times of that of PTMP. The fractionation effectiveness of TMAH solvent was not significantly reduced after repeatedly recycling. This work demonstrated TMAH solvent could selectively fractionate hemicelluloses from PTMP and efficiently promote sustainable poplar-based biorefinery.

Understanding the gut microbiota by considering human evolution: a story of fire, cereals, cooking, molecular ingenuity, and functional cooperation.

SUMMARYThe microbial community inhabiting the human colon, referred to as the gut microbiota, is mostly composed of bacterial species that, through extensive metabolic networking, degrade and ferment components of food and human secretions. The taxonomic composition of the microbiota has been extensively investigated in metagenomic studies that have also revealed details of molecular processes by which common components of the human diet are metabolized by specific members of the microbiota. Most studies of the gut microbiota aim to detect deviations in microbiota composition in patients relative to controls in the hope of showing that some diseases and conditions are due to or exacerbated by alterations to the gut microbiota. The aim of this review is to consider the gut microbiota in relation to the evolution of Homo sapiens which was heavily influenced by the consumption of a nutrient-dense non-arboreal diet, limited gut storage capacity, and acquisition of skills relating to mastering fire, cooking, and cultivation of cereal crops. The review delves into the past to gain an appreciation of what is important in the present. A holistic view of "healthy" microbiota function is proposed based on the evolutionary pathway shared by humans and gut microbes.

Structural differences of cell walls in earlywood and latewood of Pinus sylvestris and their contribution to biomass recalcitrance.

Scots pine (Pinus sylvestris L.) is an evergreen coniferous tree with wide distribution and good growth performance in a range of habitats. Therefore, wood from P. sylvestris is produced in many managed forests and is frequently used in industry. Despite the importance of pine wood, we still do not fully understand its molecular structure what limits improvements in its processing. One of the basic features leading to variation in wood properties is the presence of earlywood and latewood which form annual growth rings. Here, we characterise biochemical traits that differentiate cell walls of earlywood and latewood in Scots pine. We discover that latewood is less recalcitrant to enzymatic digestion, with galactoglucomannan showing particularly pronounced difference in accessibility. Interestingly, characterisation of lignin reveals a higher proportion of coniferaldehydes in pine latewood and suggests the presence of a different linkage landscape in this wood type. With complementary analysis of wood polysaccharides this enabled us to propose the first detailed molecular model of earlywood and latewood and to conclude that the variation in lignin structure is likely the main determinant of differences in recalcitrance observed between the two wood types in pine. Our discoveries lay the foundation for improvements in industrial processes that use pine wood since we show clear pathways for increasing the efficiency of enzymatic processing of this renewable material. Our work will help guide future breeding of pine trees with desired timber properties and can help link molecular structure of softwood cell walls to function of the different types of xylem in conifers.

Hemicelluloses hydrogel: Synthesis, characterization, and application in dye removal.

Novel materials using biowaste as adsorbents in wastewater treatment have been allocated considerable interest. Herein, we present the synthesis of different hydrogels of crosslinked polyacrylamide in presence of hemicelluloses with/ without bentonite, using a soft reaction condition. The structure of new hydrogels was characterized by spectroscopic, thermal and microscopic experiments. The semi-interpenetrated network with hemicelluloses: 10 %; acrylamide 79 %; bentonite 10 %; N,N,N',N'-tetramethylethylenediamine: 1 % allows reducing 20 % the use of non-renewable acrylamide, without changing its decomposition temperatures and keeping its water absorption capacity. This hydrogel was applied to dye removals, such as rhodamine B, methylene red and methylene blue in aqueous solutions. In the case of methylene blue, highest removal is observed with maximum adsorption of qmax = 140.66 mg/g, compared to material without hemicelluloses that only a qmax = 88.495 mg/g. The adsorption kinetics and equilibrium adsorption isotherms are in accordance with the pseudo-second-order kinetic model and Langmuir isotherm model, respectively. The developed hydrogel from hemicelluloses represents a potential alternative adsorbent for a sustainable system of sewage treatment.

Gel characteristics of low-acetyl spruce galactoglucomannans.

Galactoglucomannans (GGM) recovered from abundant forest industry side-streams has been widely recognized as a renewable hydrocolloid. The low molar mass and presence of O-acetyl side-groups results in low viscous dispersions and weak intermolecular interactions that make GGM unsuitable for hydrogel formation, unless forcefully chemically derivatized and/or crosslinked with other polymers. Here we present the characterization of hydrogels prepared from GGM after tailoring the degree of acetylation by alkaline treatment during its recovery. Specifically, we investigated gel characteristics of low-acetyl GGM dispersions prepared at varied solid concentrations (5, 10 and 15 %) and pH (4, 7 and 10), and then subjected to ultrasonication. The results indicated that low-acetyl GGM dispersions formed gels (G' > G″) at all other studied solid concentration and pH level combinations except 5 % and pH 4. High pH levels, leading to further removal of acetyl groups, and high solid concentration facilitated the gel formation. GGM hydrogels were weak gels with strong shear-thinning behavior and thixotropic properties, and high hardness and water holding capacity; which were enhanced with increased pH and solid concentration, and prolonged storage time. Our study showed the possibility to utilize low-acetyl GGM as mildly processed gelling or thickening agents, and renewable materials for bio-based hydrogels.

Influence of pectin and hemicelluloses on physical properties of bacterial cellulose.

The properties of bacterial cellulose (BC)-based films produced by in situ biosynthesis with various polysaccharides (water-soluble pectin, arabinan, rhamnogalacturonan I, arabinoxylan, xyloglucan, glucomannan) were investigated. The addition of the polysaccharides to the bacterial growth environment changed the composition of the films by incorporating characteristic monosaccharides. BC-based films contained up to 26.7 % of non-cellulosic polysaccharides. The applied modification had a clear impact on water sorption and caused a decrease in the thermal stability of most BC films, which was connected with the depletion of geometrical dimensions of cellulose nanofibers observed with AFM. The FT-IR and Raman spectra demonstrated a decrease in % Iα of cellulose films, most notably for xyloglucan and glucomannan, as well as a change in their degree of crystallinity and the length of cellulose chains. The addition of xyloglucan had the most pronounced effect on film hardening; the other additives had a similar but lesser effect.

Corn cob hemicelluloses as stabilizer for ice recrystallization inhibition in ice cream.

Food stabilizers, such as guar gum and locust bean gum (LBG), are often added to ice cream to improve its texture and to combat its main shelf-life concern - ice recrystallization. Recently these gums have become increasingly expensive due to the limited supplies. In this study, holocellulose nanocrystals (holoCNCs) and hemicelluloses (hemiCs) were prepared from readily available corn cobs and tested for ice recrystallization inhibition (IRI) activities in the 25.0 % sucrose solution and ice cream mixes (ICMs). In the sucrose solution, holoCNCs were not IRI active at a concentration of 0.5 %, but hemiCs demonstrated a good IRI activity, even at 0.1 %. In the ICMs, the IRI activity of hemiCs was better than those of guar gum and LBG at a concentration of 0.2 %. Adding 0.2-0.5 % hemiCs had no negative influences on the physicochemical properties of ICMs and ice cream, including viscosity profile, particle size distribution, overrun, hardness, and meltdown rate. These research findings demonstrated corn cob hemiCs' potential as a more sustainable ice cream stabilizer.

Green Approaches on Modification of Xylan Hemicellulose to Enhance the Functional Properties for Food Packaging Materials-A Review.

Based on the environmental concerns, the utilisation of hemicelluloses in food packaging has become a sustainable alternative to synthetic polymers and an important method for the efficient utilisation of biomass resources. After cellulose, hemicellulose is a second component of agricultural and forestry biomass that is being taken advantage of given its abundant source, biodegradability, nontoxicity and good biocompatibility. However, due to its special molecular structure and physical and chemical characteristics, the mechanical and barrier properties of hemicellulose films and coatings are not sufficient for food packaging applications and modification for performance enhancement is needed. Even though there are many studies on improving the hydrophobic properties of hemicelluloses, most do not meet environmental requirements and the chemical modification of these biopolymers is still a challenge. The present review examines emerging and green alternatives to acetylation for xylan hemicellulose in order to improve its performance, especially when it is used as biopolymer in paper coatings or films for food packaging. Ionic liquids (ILs) and enzymatic modification are environmentally friendly methods used to obtain xylan derivatives with improved thermal and mechanical properties as well as hydrophobic performances that are very important for food packaging materials. Once these novel and green methodologies of hemicellulose modifications become well understood and with validated results, their production on an industrial scale could be implemented. This paper will extend the area of hemicellulose applications and lead to the implementation of a sustainable alternative to petroleum-based products that will decrease the environmental impact of packaging materials.

Signals and Their Perception for Remodelling, Adjustment and Repair of the Plant Cell Wall.

The integrity of the cell wall is important for plant cells. Mechanical or chemical distortions, tension, pH changes in the apoplast, disturbance of the ion homeostasis, leakage of cell compounds into the apoplastic space or breakdown of cell wall polysaccharides activate cellular responses which often occur via plasma membrane-localized receptors. Breakdown products of the cell wall polysaccharides function as damage-associated molecular patterns and derive from cellulose (cello-oligomers), hemicelluloses (mainly xyloglucans and mixed-linkage glucans as well as glucuronoarabinoglucans in Poaceae) and pectins (oligogalacturonides). In addition, several types of channels participate in mechanosensing and convert physical into chemical signals. To establish a proper response, the cell has to integrate information about apoplastic alterations and disturbance of its wall with cell-internal programs which require modifications in the wall architecture due to growth, differentiation or cell division. We summarize recent progress in pattern recognition receptors for plant-derived oligosaccharides, with a focus on malectin domain-containing receptor kinases and their crosstalk with other perception systems and intracellular signaling events.

Electrodialysis Deacidification of Acid Hydrolysate in Hemicellulose Saccharification Process: Membrane Fouling Identification and Mechanisms.

Acid saccharification of hemicelluloses offers promising pathways to sustainably diversify the revenue of the lignocellulose biorefinery industry. Electrodialysis to separate inorganic acids from acid hydrolysate in the hemicellulose saccharification process could realize the recovery of sulfuric acid, and significantly reduced the chemical consumption than the traditional ion exchange resins method. In this work, the deacidification of corncob acid hydrolysate was conducted by a homemade electrodialysis apparatus. The results showed that: (1) more than 99% of acid can be removed through the electrodialysis process; (2) A non-negligible membrane fouling occurred during the electrodialysis process, which aggravated with the repeated batch running The final global system resistance rose from 15.8 Ω (1st batch) to 43.9 Ω (10th batch), and the treatment ending time was delayed from 120 min (1st batch) to 162 min (10th batch); (4) About 90% of protein, 70% of ferulate acid, and 80% of p-coumarate acid precipitated from the corncob acid hydrolysate during the electrodialysis process. The zeta potential of corncob acid hydrolysate changed from a positive value to a negative value, and an isoelectric point around pH 2.3 was reached. HSQC, FTTR, and GPC, along with SEM and EDS analysis, revealed that the fouling layers mostly consisted of hydrolysates of protein and lignin. The result of HSQC indicated that the membrane foulant may exist in the form of lignin-carbohydrate complexes, as the lignin component of the membrane foulant is in the form of p-coumarate and ferulate. From the result of FTIR, a strong chemical bonding, such as a covalent linkage, existed between the lignin and protein in the membrane foulant. Throughout the electrodialysis process, the increased pH decreased the stability of colloidal particles, including lignin and proteins. Destabilized colloidal particles started to self-aggregate and form deposits on the anion exchange membrane's surface. Over time, these deposits covered the entire membrane surface and the spaces between the membranes. Eventually, they attached to the surface of the cation exchange membrane. In the end, a suggestion to control and minimize membrane fouling in this process was discussed: lower pH as a process endpoint and a post-treatment method.

Arundo donax L Processing in Catalyzed Butanol-Water Media in the Scope of Lignocellulose Biorefineries.

Arundo donax L samples, before or after aqueous extraction to remove extractives, were subjected to chemical fractionation in H2SO4-catalyzed mixtures of 1-butanol and water. The partial miscibility of 1-butanol and water at room temperature allowed the separation of the three major feedstock components in separate streams (lignin, accumulated in the 1-butanol-rich phase; hemicellulose-derived products, accumulated in the aqueous acidic phase; and cellulose, present in the solid phase). The effects of selected variables (temperature, catalyst concentration, reaction time and 1-butanol content of the reaction media) on variables measuring the solid recovery yield and the compositions of phases from fractionation were measured. Using water-extracted A. donax L as a substrate, the best operational conditions enabled 93.2% hemicellulose removal and 85.4% delignification with limited cellulose solubilization (15%). The experimental results provided key information to assess the proposed process in the scope of biorefineries.

Investigation of the chemical structure and analgesic and anti-inflammatory properties of polysaccharides that constitute the dietary fibers of soursop (Annona muricata) fruit.

Soursop fruits are widely used in the folk medicine to treat a variety of health conditions. Once the chemical structure of dietary fibers from fruits is closely related to its biological functions in the human body, we aimed to explore structural features and biological activity of dietary fibers from soursop. Polysaccharides that constitute the soluble and insoluble fibers were extracted and further analyzed using monosaccharide composition, methylation, molecular weight determination and 13C NMR data. Soursop soluble fibers (SWa fraction) were characterized as having type II arabinogalactan and a highly methyl esterified homogalacturonan, while non-cellulosic insoluble fibers (SSKa fraction) were mainly composed by a pectic arabinan, a xylan-xyloglucan complex and a glucuronoxylan. The oral pre-treatment with SWa and SSKa promoted antinociception in mice writhing test, reducing the number of pain-like behaviors (in 84.2 % and 46.9 %, respectively, at 10 mg/kg) and peritoneal leucocyte migration (55.4 % and 59.1 %, at 10 mg/kg), effects possibly associated with the pectins present in fruit pulp extractions. SWa also significantly inhibited the plasmatic extravasation of Evans blue dye in 39.6 % at 10 mg/kg. This paper describes for the first time the structural features of soursop dietary fibers that may be of biological significance in future.

Open questions in plant cell wall synthesis.

Plant cells are surrounded by strong yet flexible polysaccharide-based cell walls that support cells while also allowing growth by cell expansion. Plant cell wall research has advanced tremendously in recent years. Sequenced genomes of model and crop plants have facilitated cataloguing and characterization of many enzymes involved in cell wall synthesis. Structural information has been generated for several important cell wall-synthesizing enzymes. Important tools have been developed including antibodies raised against a variety of cell wall polysaccharides and glycoproteins, collections of enzyme clones and synthetic glycan arrays for characterizing enzymes, herbicides that specifically affect cell wall synthesis, live-cell imaging probes to track cell wall synthesis, and an inducible secondary cell wall synthesis system. Despite these advances, and often because of the new information they provide, many open questions about plant cell wall polysaccharide synthesis persist. This article highlights some of the key questions that remain open, reviews the data supporting different hypotheses that address these questions, and discusses technological developments that may answer these questions in the future.

Dynamic structural evolution of lignin macromolecules and hemicelluloses during Chinese pine growth.

To comprehend the biosynthesis processes of conifers, it is essential to investigate the disparity between the cell wall shape and the interior chemical structures of polymers throughout the development of Chinese pine. In this study, branches of mature Chinese pine were separated according to their growth time (2, 4, 6, 8 and 10 years). The variation of cell wall morphology and lignin distribution was comprehensively monitored by scanning electron microscopy (SEM) and confocal Raman microscopy (CRM), respectively. Moreover, the chemical structures of lignin and alkali-extracted hemicelluloses were extensively characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The thickness of latewood cell walls increased steadily from 1.29 µm to 3.38 µm, and the structure of the cell wall components became more complicated as the growth time increased. Based on the structural analysis, it was found that the content of ß-O-4 (39.88-45.44/100 Ar), ß-ß (3.20-10.02/100 Ar) and ß-5 (8.09-15.35/100 Ar) linkages as well as the degree of polymerization of lignin increased with the growth time. The complication propensity increased significantly over 6 years before slowing to a trickle over 8 and 10 years. Furthermore, alkali-extracted hemicelluloses of Chinese pine mainly consist of galactoglucomannans and arabinoglucuronxylan, in which the relative content of galactoglucomannans increased with the growth of the pine, especially from 6 to 10 years.

Model-based process intensification of dilute acid pre-hydrolysis of oil palm empty fruit bunch biomass for pretreatment and furfural production.

A novel process for simultaneous production of furfural and pretreatment of oil palm empty fruit bunch (EFB) by dilute acid pre-hydrolysis was developed based on non-isothermal kinetic modeling. Mass transfer analysis suggested that the internal diffusion could be neglected as diffusion time of sulfuric acid in EFB particles was significantly shorter than the pre-hydrolysis period, whereas the heating stage could not be neglected due to a significant part of xylan was solubilized at the stage. A strategy for increasing furfural yield was developed by intermittent discharging of steam, resulting in 71.4 % furfural yield. The pretreated solids showed good enzymatic digestibility. 136.3 g/L glucose corresponding to 81.6 % yield was obtained by high-solid loading hydrolysis. 95.4 g furfural and 212 g glucose could be obtained from 1 kg dry EFB. Therefore, non-isothermal effects on polysaccharide hydrolysis and pentose decomposition should be considered carefully for an efficient process design of EFB biorefining.