Spin Gapless Quantum Materials and Devices.

Quantum materials, with nontrivial quantum phenomena and mechanisms, promise efficient quantum technologies with enhanced functionalities. Quantum technology is held back because a gap between fundamental science and its implementation is not fully understood yet. In order to capitalize the quantum advantage, a new perspective is required to figure out and close this gap. In this review, spin gapless quantum materials, featured by fully spin-polarized bands and the electron/hole transport, are discussed from the perspective of fundamental understanding and device applications. Spin gapless quantum materials can be simulated by minimal two-band models and could help to understand band structure engineering in various topological quantum materials discovered so far. It is explicitly highlighted that various types of spin gapless band dispersion are fundamental ingredients to understand quantum anomalous Hall effect. Based on conventional transport in the bulk and topological transport on the boundaries, various spintronic device aspects of spin gapless quantum materials as well as their advantages in different models for topological field effect transistors are reviewed.

Interplay between Topological States and Rashba States as Manifested on Surface Steps at Room Temperature.

The unique spin texture of quantum states in topological materials underpins many proposed spintronic applications. However, realizations of such great potential are stymied by perturbations, such as temperature and local fields imposed by impurities and defects, that can render a promising quantum state uncontrollable. Here, we report room-temperature scanning tunneling microscopy/spectroscopy observation of interaction between Rashba states and topological surface states, which manifests local electronic structure along step edges controllable by the layer thickness of thin films. The first-principles theoretical calculation elucidates the robust Rashba states coexisting with topological surface states along the surface steps with characteristic spin textures in momentum space. Furthermore, the Rashba edge states can be switched off by reducing the thickness of a topological insulator Bi2Se3 to bolster their interaction with the hybridized topological surface states. The study unveils a manipulating mechanism of the spin textures at room temperature, reinforcing the necessity of thin film technology in controlling the quantum states.

Ubiquitous Order-Disorder Transition in the Mn Antisite Sublattice of the (MnBi2Te4)(Bi2Te3)n Magnetic Topological Insulators.

Magnetic topological insulators (TIs) herald a wealth of applications in spin-based technologies, relying on the novel quantum phenomena provided by their topological properties. Particularly promising is the (MnBi2Te4)(Bi2Te3)n layered family of established intrinsic magnetic TIs that can flexibly realize various magnetic orders and topological states. High tunability of this material platform is enabled by manganese-pnictogen intermixing, whose amounts and distribution patterns are controlled by synthetic conditions. Here, nuclear magnetic resonance and muon spin spectroscopy, sensitive local probe techniques, are employed to scrutinize the impact of the intermixing on the magnetic properties of (MnBi2Te4)(Bi2Te3)n and MnSb2Te4. The measurements not only confirm the opposite alignment between the Mn magnetic moments on native sites and antisites in the ground state of MnSb2Te4, but for the first time directly show the same alignment in (MnBi2Te4)(Bi2Te3)n with n = 0, 1 and 2. Moreover, for all compounds, the static magnetic moment of the Mn antisite sublattice is found to disappear well below the intrinsic magnetic transition temperature, leaving a homogeneous magnetic structure undisturbed by the intermixing. The findings provide a microscopic understanding of the crucial role played by Mn-Bi intermixing in (MnBi2Te4)(Bi2Te3)n and offer pathways to optimizing the magnetic gap in its surface states.

Strength of Composite Pressure Insulators for High Voltage Circuit Breakers: An Experimental and Numerical Investigation.

Glass fiber-reinforced composite cylinders, capable of withstanding internal pressure generated during service, are increasingly utilized as insulators in high voltage circuit breakers. Different testing procedures have been suggested by various standards to assess the pressure resistance of these components. Due to its simplicity and cost-effectiveness, the split-disk testing method is the most widely used for evaluating the hoop strength of pressure cylinders during the development and verification phases. However, the method presents several aspects, such as those related to the influence of specimen geometry and friction, which require further examination since they may impact the outcome of the experimental tests. The investigation, carried out by a combination of experimental testing and finite element analyses, shows that the friction between the specimen and the semi-disks has a noteworthy effect on the hoop load applied to the specimen. Almost constant load distributions along the hoop direction, representative of the real operating conditions in a pressurized cylinder, can be achieved via proper lubrication of the contact surfaces. Furthermore, FE analyses demonstrate that the notch geometry suggested by specific standards (short notch) is not capable of inducing a uniform strain distribution in the notched region. A different notch geometry (long notch) is proposed in the study to attain a more uniform strain field over the reduced area region. The experimental results indicate that the strength measured on the short notch specimens is higher than that determined on the long notch specimens, thus confirming the significant influence of strain distribution on the strength properties measured with the split-disk method.

Multiphoton-pumped UV-Vis transient absorption spectroscopy of 2D materials: basic concepts and recent applications.

2D materials are considered a key element in the development of next-generation electronics (nanoelectronics) due to their extreme thickness in the nanometer range and unique physical properties. The ultrafast dynamics of photoexcited carriers in such materials are strongly influenced by their interfaces, since the thickness of 2D materials is much smaller than the typical depth of light penetration into their bulk counterparts and the mean free path of photoexcited carriers. The resulting collisions of photoexcited carriers with interfacial potential barriers of 2D materials in the presence of a strong laser field significantly alter the overall dynamics of photoexcitation, allowing laser light to be directly absorbed by carriers in the conduction/valence band through the inverse bremsstrahlung mechanism. The corresponding ultrafast carrier dynamics can be monitored using multiphoton-pumped UV-Vis transient absorption spectroscopy. In this review, we discuss the basic concepts and recent applications of this spectroscopy for a variety of 2D materials, including transition-metal dichalcogenide monolayers, topological insulators, and other 2D semiconductor structures.

Hidden secrets of the cancer genome: unlocking the impact of non-coding mutations in gene regulatory elements.

Discoveries in the field of genomics have revealed that non-coding genomic regions are not merely "junk DNA", but rather comprise critical elements involved in gene expression. These gene regulatory elements (GREs) include enhancers, insulators, silencers, and gene promoters. Notably, new evidence shows how mutations within these regions substantially influence gene expression programs, especially in the context of cancer. Advances in high-throughput sequencing technologies have accelerated the identification of somatic and germline single nucleotide mutations in non-coding genomic regions. This review provides an overview of somatic and germline non-coding single nucleotide alterations affecting transcription factor binding sites in GREs, specifically involved in cancer biology. It also summarizes the technologies available for exploring GREs and the challenges associated with studying and characterizing non-coding single nucleotide mutations. Understanding the role of GRE alterations in cancer is essential for improving diagnostic and prognostic capabilities in the precision medicine era, leading to enhanced patient-centered clinical outcomes.

Design of Antiferromagnetic Second-Order Band Topology with Rotation Topological Invariants in Two Dimensions.

The existence of fractionally quantized topological corner charge serves as a key indicator for two-dimensional (2D) second-order topological insulators (SOTIs), yet it has not been experimentally observed in realistic materials. Here, based on effective model analysis and symmetry arguments, we propose a strategy for achieving SOTI phases with in-gap corner states in 2D systems with antiferromagnetic (AFM) order. We discover that the band topology originates from the interplay between intrinsic spin-orbital coupling and interlayer AFM exchange interactions. Using first-principles calculations, we show that the 2D AFM SOTI phase can be realized in (MnBi2Te4)(Bi2Te3)m films. Moreover, we demonstrate that the SOTI states are linked to rotation topological invariants under 3-fold rotation symmetry C3, resulting in fractionally quantized corner charge, i.e., n3|e| (mod e). Due to the great achievements in (MnBi2Te4)(Bi2Te3)m systems, our results providing reliable material candidates for experimentally accessible AFM SOTIs should draw intense attention.

Role of Mod(mdg4)-67.2 Protein in Interactions between Su(Hw)-Dependent Complexes and Their Recruitment to Chromatin.

Su(Hw) belongs to the class of proteins that organize chromosome architecture, determine promoter activity, and participate in formation of the boundaries/insulators between the regulatory domains. This protein contains a cluster of 12 zinc fingers of the C2H2 type, some of which are responsible for binding to the consensus site. The Su(Hw) protein forms complex with the Mod(mdg4)-67.2 and the CP190 proteins, where the last one binds to all known Drosophila insulators. To further study functioning of the Su(Hw)-dependent complexes, we used the previously described su(Hw)E8 mutation with inactive seventh zinc finger, which produces mutant protein that cannot bind to the consensus site. The present work shows that the Su(Hw)E8 protein continues to directly interact with the CP190 and Mod(mdg4)-67.2 proteins. Through interaction with Mod(mdg4)-67.2, the Su(Hw)E8 protein can be recruited into the Su(Hw)-dependent complexes formed on chromatin and enhance their insulator activity. Our results demonstrate that the Su(Hw) dependent complexes without bound DNA can be recruited to the Su(Hw) binding sites through the specific protein-protein interactions that are stabilized by Mod(mdg4)-67.2.

The dynamical bulk boundary correspondence and dynamical quantum phase transitions in the Benalcazar-Bernevig-Hughes model.

In this article we demonstrate that dynamical quantum phase transitions (DQPTs) occur for an exemplary higher order topological insulator, the Benalcazar-Bernevig-Hughes model, following quenches across a topological phase boundary. A dynamical bulk boundary correspondence is also seen both in the eigenvalues of the Loschmidt overlap matrix and the boundary return rate. The latter is found from a finite size scaling analysis for which the relative simplicity of the model is crucial. Contrary to the usual two dimensional case the DQPTs in this model show up as cusps in the return rate, as for a one dimensional model, rather than as cusps in its derivative as would be typical for a two dimensional model. We explain the origin of this behaviour.

Coupled Electronic and Magnonic Topological States in Two-Dimensional Ferromagnets.

Magnetic materials offer a fertile playground for fundamental physics discovery, with not only electronic but also magnonic topological states intensively explored. However, one natural material with both electronic and magnonic nontrivial topologies is still unknown. Here, we demonstrate the coexistence of first-order topological magnon insulators (TMIs) and electronic second-order topological insulators (SOTIs) in 2D honeycomb ferromagnets, giving rise to the nontrivial corner states being connected by the charge-free magnonic edge states. We show that, with C3 symmetry, the phase factor ± ϕ caused by the next nearest-neighbor Dzyaloshinskii-Moriya interaction breaks the pseudo-spin time-reversal symmetry T, which leads to the split of magnon bands, i.e., the emergence of TMIs with a nonzero Chern number of C=-1, in experimentally feasible candidates of MoI3, CrSiTe3, and CrGeTe3 monolayers. Moreover, protected by the C3 symmetry, the electronic SOTIs characterized by nontrivial corner states are obtained, bridging the topological aspect of fermions and bosons with a high possibility of innovative applications in spintronics devices.

Tailored Triggering of High-Quality Multi-Dimensional Coupled Topological States in Valley Photonic Crystals.

The combination of higher-order topological insulators and valley photonic crystals has recently aroused extensive attentions due to the great potential in flexible and efficient optical field manipulations. Here, we computationally propose a photonic device for the 1550 nm communication band, in which the topologically protected electromagnetic modes with high quality can be selectively triggered and modulated on demand. Through introducing two valley photonic crystal units without any structural alteration, we successfully achieve multi-dimensional coupled topological states thanks to the diverse electromagnetic characteristics of two valley edge states. According to the simulations, the constructed topological photonic devices can realize Fano lines on the spectrum and show high-quality localized modes by tuning the coupling strength between the zero-dimensional valley corner states and the one-dimensional valley edge states. Furthermore, we extend the valley-locked properties of edge states to higher-order valley topological insulators, where the selected corner states can be directionally excited by chiral source. More interestingly, we find that the modulation of multi-dimensional coupled photonic topological states with pseudospin dependence become more efficient compared with those uncoupled modes. This work presents a valuable approach for multi-dimensional optical field manipulation, which may support potential applications in on-chip integrated nanophotonic devices.

Signature of excitonic insulators in phosphorene nanoribbons.

Phosphorene is a recently developed two-dimensional (2D) material that has attracted tremendous attention because of its unique anisotropic optical properties and quasi-one-dimensional (1D) excitons. We use first-principles calculations combined with the maximally localized Wannier function tight binding Hamiltonian and Bethe-Salpeter equation (BSE) formalism to investigate quasiparticle effects of 2D and quasi-1D blue and black phosphorene nanoribbons. Our electronic structure calculations shows that both blue and black monolayered phases are semiconductors. On the other hand black phosphorene zigzag nanoribbons are metallic. Similar behavior is found for very thin blue phosphorene zig-zag and armchair nanoribbon. As a general behavior, the exciton binding energy decreases as the ribbon width increases, which highlights the importance of quantum confinement effects. The solution of the BSE shows that the blue phosphorene monolayer has an exciton binding energy four times higher than that of the black phosphorene counterpart. Furthermore, both monolayers show a different linear optical response with respect to light polarization, as black phosphorene is highly anisotropic. We find a similar, but less pronounced, optical anisotropy for blue phosphorene monolayer, caused exclusively by the quasi-particle effects. Finally, we show that some of the investigated nanoribbons show a spin-triplet excitonic insulator behavior, thus revealing exciting features of these nanoribbons and therefore provides important advances in the understanding of quasi-one dimensional phosphorus-based materials.

Development of Light, Strong, and Water-Resistant PVA Composite Aerogels.

A significant weakness of many organic and inorganic aerogels is their poor mechanical behaviour, representing a great impediment to their application. For example, polymer aerogels generally have higher ductility than silica aerogels, but their elastic modulus is considered too low. Herein, we developed extremely low loading (<1 wt%) 2D graphene oxide (GO) nanosheets modified poly (vinyl alcohol) (PVA) aerogels via a facile and environmentally friendly method. The aerogel shows a 9-fold increase in compressional modulus compared to a pure polymer aerogel. With a low density of 0.04 mg/mm3 and a thermal conductivity of only 0.035 W/m·K, it outperforms many commercial insulators and foams. As compared to a pure PVA polymer aerogel, a 170% increase in storage modulus is obtained by adding only 0.6 wt% GO nanosheets. The nanocomposite aerogel demonstrates strong fire resistance, with a 50% increase in burning time and little smoke discharge. After surface modification with 1H,1H,2H,2H-Perfluorodecyltriethoxysilane, the aerogel demonstrates water resistance, which is suitable for outdoor applications in which it would be exposed to precipitation. Our research demonstrates a new pathway for considerable improvement in the performance and application of polymer aerogels.

Topology-Engineered Orbital Hall Effect in Two-Dimensional Ferromagnets.

Recent advances in the manipulation of the orbital angular momentum (OAM) within the paradigm of orbitronics presents a promising avenue for the design of future electronic devices. In this context, the recently observed orbital Hall effect (OHE) occupies a special place. Here, focusing on both the second-order topological and quantum anomalous Hall insulators in two-dimensional ferromagnets, we demonstrate that topological phase transitions present an efficient and straightforward way to engineer the OHE, where the OAM distribution can be controlled by the nature of the band inversion. Using first-principles calculations, we identify Janus RuBrCl and three septuple layers of MnBi2Te4 as experimentally feasible examples of the proposed mechanism of OHE engineering by topology. With our work, we open up new possibilities for innovative applications in topological spintronics and orbitronics.

Topological phase transitions with zero indirect band gaps.

Topological phase transitions in band models are usually associated to the gap closing between the highest valance band and the lowest conduction band, which can give rise to different types of nodal structures, such as Dirac/Weyl points, lines and surfaces. In this work, we show the existence of a different kind of topological phase transitions in one-dimensional systems, which are instead characterized by the presence of a robust zero indirect gap, which occurs when the top of the valence band coincides with the bottom of the conduction band in energy but not in momentum. More specifically, we consider an one-dimensional model on a trimer chain that is protected by both particle-hole and chiral-inversion symmetries. At the critical point, the system supports a Dirac-like point. After introducing a deforming parameter that breaks both inversion and chiral symmetries but preserves their combination, we observe the emergence of a zero indirect band gap, which results to be related to thepersymmetryof our Hamiltonian. Importantly, the zero indirect gap holds for a range of values of the deforming parameter. We finally discuss the implementation of the deforming parameter in our tight-binding model through time-periodic (Floquet) driving.

Spin-orbit torques due to topological insulator surface states: an in-plane magnetization as a probe of extrinsic spin-orbit scattering.

Topological insulator (TI) surface states exert strong spin-orbit torques. When the magnetization is in the plane its interaction with the TI conduction electrons is non-trivial, and is influenced by extrinsic spin-orbit scattering. This is expected to be strong in TIs but is difficult to calculate and to measure unambiguously. Here we show that extrinsic spin-orbit scattering sizably renormalizes the surface state spin-orbit torque resulting in a strong density dependence. The magnitude of the renormalization of the spin torque and the effect of spin-orbit scattering on the relative sizes of the in-plane and out-of-plane field-like torques have strong implications for experiment: We propose two separate experimental signatures for the measurement of its presence.

Temperature-Dependent Spin-to-Charge Conversion and Efficient Manipulation of Elliptical THz Waves in Bi2Te3/TbFeCo Heterostructures.

Topological insulators (TIs) with spin-momentum-locked surface states and considerable spin-to-charge conversion (SCC) efficiency are ideal substitutes for the nonmagnetic layer in the traditional ferromagnetic/nonmagnetic (FM/NM) spintronic terahertz (THz) emitters. Here, the TI/ferrimagnetic structure as an effective polarization tunable THz source is verified by terahertz emission spectroscopy. The emitted THz electric field can be separated into two THz components utilizing their opposite symmetry on pump polarization and the magnetic field. TI not only emits a THz electric field via the linear photogalvanic effect (LPGE) but also serves as the medium of SCC via the inverse Edelstein effect (IEE) in the heterostructure. In addition, the amplitude and polarity of the SCC component can be efficiently manipulated by temperature in our ferrimagnetic TbFeCo layer compared with Co or Fe. Once these two THz components are delicately set orthogonally, an elliptical THz wave is generated by the intrinsic phase difference at the THz frequency range. The feasible control of its polarization and chirality is demonstrated by three means: pump polarization, magnetic field, and temperature. These appealing observations may pave the way for the development of elliptical THz wave emitters and polarization-sensitive THz spectroscopy.

Regenerative Superhydrophobic Coatings for Enhanced Performance and Durability of High-Voltage Electrical Insulators in Cold Climates.

Superhydrophobic coatings can be a suitable solution for protecting vulnerable electrical infrastructures in regions with severe meteorological conditions. Regenerative superhydrophobicity, the ability to regain superhydrophobicity after being compromised or degraded, could address the issue of the low durability of these coatings. In this study, we fabricated a superhydrophobic coating comprising hydrophobic aerogel microparticles and polydimethylsiloxane (PDMS)-modified silica nanoparticles within a PDMS matrix containing trifluoropropyl POSS (F-POSS) and XIAMETER PMX-series silicone oil as superhydrophobicity-regenerating agents. The fabricated coating exhibited a static contact angle of 169.5° and a contact angle hysteresis of 6°. This coating was capable of regaining its superhydrophobicity after various pH immersion and plasma deterioration tests. The developed coating demonstrated ice adhesion as low as 71.2 kPa, which remained relatively unchanged even after several icing/de-icing cycles. Furthermore, the coating exhibited a higher flashover voltage than the reference samples and maintained a minimal drop in flashover voltage after consecutive testing cycles. Given this performance, this developed coating can be an ideal choice for enhancing the lifespan of electrical insulators.

Observation of an acoustic topological Euler insulator with meronic waves.

Topological band theory has conventionally been concerned with the topology of bands around a single gap. Only recently non-Abelian topologies that thrive on involving multiple gaps were studied, unveiling a new horizon in topological physics beyond the conventional paradigm. Here, we report on the first experimental realization of a topological Euler insulator phase with unique meronic characterization in an acoustic metamaterial. We demonstrate that this topological phase has several nontrivial features: First, the system cannot be described by conventional topological band theory, but has a nontrivial Euler class that captures the unconventional geometry of the Bloch bands in the Brillouin zone. Second, we uncover in theory and probe in experiments a meronic configuration of the bulk Bloch states for the first time. Third, using a detailed symmetry analysis, we show that the topological Euler insulator evolves from a non-Abelian topological semimetal phase via. the annihilation of Dirac points in pairs in one of the band gaps. With these nontrivial properties, we establish concretely an unconventional bulk-edge correspondence which is confirmed by directly measuring the edge states via. pump-probe techniques. Our work thus unveils a nontrivial topological Euler insulator phase with a unique meronic pattern and paves the way as a platform for non-Abelian topological phenomena.

Valley edge states as bound states in the continuum.

Bound states in the continuum (BICs) are spatially localized states with energy embedded in the continuum spectrum of extended states. The combination of BICs physics and nontrivial band topology theory givs rise to topological BICs, which are robust against disorders and meanwhile, the merit of conventional BICs is attracting wide attention recently. Here, we report valley edge states as topological BICs, which appear at the domain wall between two distinct valley topological phases. The robustness of such BICs is demonstrated. The simulations and experiments show great agreement. Our findings of valley related topological BICs shed light on both BICs and valley physics, and may foster innovative applications of topological acoustic devices.