RESUMO
In the contemporary era, there is a heightened awareness of the significance of a spiritual life, and travel is a popular choice for many. The Internet is driving rapid diversification in people's travel choices. At the same time, the traditional tourism industry's Tourism Management (TM) model, which has been in place for decades, is no longer able to satisfy people's diversified choices for tourism. This is due to a number of factors, including the trust crisis caused by asymmetric information, the outdated nature of the TM model, and the insecure personal information that is shared between intermediaries. This paper discusses the application of sustainable blockchain technology in tourism management and sets up a tourism management system based on blockchain and the Internet of Things. It takes 20 scenic spots as examples to study the application of the TM model. This paper evaluates the TM model from four key aspects: tourist satisfaction, tourism infrastructure completeness, tourism consumption level and tourism service content richness. It compares the results with those of the traditional TM system. The experimental results are clear: tourist satisfaction at scenic spots 5, 10 and 15 in the sustainable blockchain TM mode is 68 %, 87 % and 71 % respectively, which is higher than that in the traditional TM mode. In the context of sustainable blockchain, the TM mode is the optimal approach for serving tourists and enhancing their travel experience. This study also assists Chinese tourism business operators in recognizing the potential impact of blockchain technology on the development of the tourism industry. They can then formulate strategies at an early stage to cope with the information technology changes in the era of the digital economy.
RESUMO
The evolution of food safety practices is crucial in addressing the challenges posed by a growing global population and increasingly complex food supply chains. Traditional methods are often labor-intensive, time-consuming, and susceptible to human error. This chapter explores the transformative potential of integrating microfluidics into smart food safety protocols. Microfluidics, involving the manipulation of small fluid volumes within microscale channels, offers a sophisticated platform for developing miniaturized devices capable of complex tasks. Combined with sensors, actuators, big data analytics, artificial intelligence, and the Internet of Things, smart microfluidic systems enable real-time data acquisition, analysis, and decision-making. These systems enhance control, automation, and adaptability, making them ideal for detecting contaminants, pathogens, and chemical residues in food products. The chapter covers the fundamentals of microfluidics, its integration with smart technologies, and its applications in food safety, addressing the challenges and future directions in this field.
Assuntos
Inocuidade dos Alimentos , Microfluídica , Microfluídica/métodos , Humanos , Contaminação de Alimentos/análise , Inteligência ArtificialRESUMO
Maintaining security in communication networks has long been a major concern. This issue has become increasingly crucial due to the emergence of new communication architectures like the Internet of Things (IoT) and the advancement and complexity of infiltration techniques. For usage in networks based on the Internet of Things, previous intrusion detection systems (IDSs), which often use a centralized design to identify threats, are now ineffective. For the resolution of these issues, this study presents a novel and cooperative approach to IoT intrusion detection that may be useful in resolving certain current security issues. The suggested approach chooses the most important attributes that best describe the communication between objects by using Black Hole Optimization (BHO). Additionally, a novel method for describing the network's matrix-based communication properties is put forward. The inputs of the suggested intrusion detection model consist of these two feature sets. The suggested technique splits the network into a number of subnets using the software-defined network (SDN). Monitoring of each subnet is done by a controller node, which uses a parallel combination of convolutional neural networks (PCNN) to determine the presence of security threats in the traffic passing through its subnet. The proposed method also uses the majority voting approach for the cooperation of controller nodes in order to more accurately detect attacks. The findings demonstrate that, in comparison to the prior approaches, the suggested cooperative strategy can detect assaults in the NSLKDD and NSW-NB15 datasets with an accuracy of 99.89 and 97.72 percent, respectively. This is a minimum 0.6 percent improvement.
RESUMO
The number of applications of low-power wide-area networks (LPWANs) has been growing quite considerably in the past few years and so has the number of protocol stacks. Despite this fact, there is still no fully open LPWAN protocol stack available to the public, which limits the flexibility and ease of integration of the existing ones. The closest to being fully open is LoRa; however, only its medium access control (MAC) layer, known as LoRaWAN, is open and its physical and logical link control layers, also known as LoRa PHY, are still only partially understood. In this paper, the essential missing aspects of LoRa PHY are not only reverse engineered, but also, a new design of the transceiver and its sub-components are proposed and implemented in a modular and flexible way using GNU Radio. Finally, some examples of applications of both the transceiver and its components, which are made to be run in a simple setup by using cheap and widely available off-the-shelf hardware, are given to show how the library can be used and extended.
RESUMO
Computer Vision (CV) has become increasingly important for Single-Board Computers (SBCs) due to their widespread deployment in addressing real-world problems. Specifically, in the context of smart cities, there is an emerging trend of developing end-to-end video analytics solutions designed to address urban challenges such as traffic management, disaster response, and waste management. However, deploying CV solutions on SBCs presents several pressing challenges (e.g., limited computation power, inefficient energy management, and real-time processing needs) hindering their use at scale. Graphical Processing Units (GPUs) and software-level developments have emerged recently in addressing these challenges to enable the elevated performance of SBCs; however, it is still an active area of research. There is a gap in the literature for a comprehensive review of such recent and rapidly evolving advancements on both software and hardware fronts. The presented review provides a detailed overview of the existing GPU-accelerated edge-computing SBCs and software advancements including algorithm optimization techniques, packages, development frameworks, and hardware deployment specific packages. This review provides a subjective comparative analysis based on critical factors to help applied Artificial Intelligence (AI) researchers in demonstrating the existing state of the art and selecting the best suited combinations for their specific use-case. At the end, the paper also discusses potential limitations of the existing SBCs and highlights the future research directions in this domain.
RESUMO
Composite materials are increasingly important in making high-performance products. However, contemporary composites manufacturing processes still encounter significant challenges that range from inherent material stochasticity to manufacturing process variabilities. This paper proposes a novel smart Industrial Internet of Things framework, which is also referred to as an Artificial Intelligence of Things (AIoT) framework for composites manufacturing. This framework improves production performance through real-time process monitoring and AI-based forecasting. It comprises three main components: (i) an array of temperature, heat flux, dielectric, and flow sensors for data acquisition from production machines and products being made, (ii) an IoT-based platform for instantaneous sensor data integration and visualisation, and (iii) an AI-based model for production process forecasting. Via these components, the framework performs real-time production process monitoring, visualisation, and prediction of future process states. This paper also presents a proof-of-concept implementation of the framework and a real-world composites manufacturing case study that showcases its benefits.
RESUMO
The wide-ranging applications of the Internet of Things (IoT) show that it has the potential to revolutionise industry, improve daily life, and overcome global challenges. This study aims to evaluate the performance scalability of mature industrial wireless sensor networks (IWSNs). A new classification approach for IoT in the industrial sector is proposed based on multiple factors and we introduce the integration of 6LoWPAN (IPv6 over low-power wireless personal area networks), message queuing telemetry transport for sensor networks (MQTT-SN), and ContikiMAC protocols for sensor nodes in an industrial IoT system to improve energy-efficient connectivity. The Contiki COOJA WSN simulator was applied to model and simulate the performance of the protocols in two static and moving scenarios and evaluate the proposed novelty detection system (NDS) for network intrusions in order to identify certain events in real time for realistic dataset analysis. The simulation results show that our method is an essential measure in determining the number of transmissions required to achieve a certain reliability target in an IWSNs. Despite the growing demand for low-power operation, deterministic communication, and end-to-end reliability, our methodology of an innovative sensor design using selective surface activation induced by laser (SSAIL) technology was developed and deployed in the FTMC premises to demonstrate its long-term functionality and reliability. The proposed framework was experimentally validated and tested through simulations to demonstrate the applicability and suitability of the proposed approach. The energy efficiency in the optimised WSN was increased by 50%, battery life was extended by 350%, duplicated packets were reduced by 80%, data collisions were reduced by 80%, and it was shown that the proposed methodology and tools could be used effectively in the development of telemetry node networks in new industrial projects in order to detect events and breaches in IoT networks accurately. The energy consumption of the developed sensor nodes was measured. Overall, this study performed a comprehensive assessment of the challenges of industrial processes, such as the reliability and stability of telemetry channels, the energy efficiency of autonomous nodes, and the minimisation of duplicate information transmission in IWSNs.
RESUMO
This research paper explores the realm of fault detection in distributed motors through the vision of the Internet of electrical drives. This paper aims at employing artificial neural networks supported by the data collected by the Internet of distributed devices. Cross-verification of results offers reliable diagnosis of industrial motor faults. The proposed methodology involves the development of a cyber-physical system architecture and mathematical modeling framework for efficient fault detection. The mathematical model is designed to capture the intricate relationships within the cyber-physical system, incorporating the dynamic interactions between distributed motors and their edge controllers. Fast Fourier transform is employed for signal processing, enabling the extraction of meaningful frequency features that serve as indicators of potential faults. The artificial neural network based fault detection system is integrated with the solution, utilizing its ability to learn complex patterns and adapt to varying motor conditions. The effectiveness of the proposed framework and model is demonstrated through experimental results. The experimental setup involves diverse fault scenarios, and the system's performance is evaluated in terms of accuracy, sensitivity, and false positive rates.
RESUMO
The number of connected devices or Internet of Things (IoT) devices has rapidly increased. According to the latest available statistics, in 2023, there were approximately 17.2 billion connected IoT devices; this is expected to reach 25.4 billion IoT devices by 2030 and grow year over year for the foreseeable future. IoT devices share, collect, and exchange data via the internet, wireless networks, or other networks with one another. IoT interconnection technology improves and facilitates people's lives but, at the same time, poses a real threat to their security. Denial-of-Service (DoS) and Distributed Denial-of-Service (DDoS) attacks are considered the most common and threatening attacks that strike IoT devices' security. These are considered to be an increasing trend, and it will be a major challenge to reduce risk, especially in the future. In this context, this paper presents an improved framework (SDN-ML-IoT) that works as an Intrusion and Prevention Detection System (IDPS) that could help to detect DDoS attacks with more efficiency and mitigate them in real time. This SDN-ML-IoT uses a Machine Learning (ML) method in a Software-Defined Networking (SDN) environment in order to protect smart home IoT devices from DDoS attacks. We employed an ML method based on Random Forest (RF), Logistic Regression (LR), k-Nearest Neighbors (kNN), and Naive Bayes (NB) with a One-versus-Rest (OvR) strategy and then compared our work to other related works. Based on the performance metrics, such as confusion matrix, training time, prediction time, accuracy, and Area Under the Receiver Operating Characteristic curve (AUC-ROC), it was established that SDN-ML-IoT, when applied to RF, outperforms other ML algorithms, as well as similar approaches related to our work. It had an impressive accuracy of 99.99%, and it could mitigate DDoS attacks in less than 3 s. We conducted a comparative analysis of various models and algorithms used in the related works. The results indicated that our proposed approach outperforms others, showcasing its effectiveness in both detecting and mitigating DDoS attacks within SDNs. Based on these promising results, we have opted to deploy SDN-ML-IoT within the SDN. This implementation ensures the safeguarding of IoT devices in smart homes against DDoS attacks within the network traffic.
RESUMO
Effective air quality monitoring and forecasting are essential for safeguarding public health, protecting the environment, and promoting sustainable development in smart cities. Conventional systems are cloud-based, incur high costs, lack accurate Deep Learning (DL)models for multi-step forecasting, and fail to optimize DL models for fog nodes. To address these challenges, this paper proposes a Fog-enabled Air Quality Monitoring and Prediction (FAQMP) system by integrating the Internet of Things (IoT), Fog Computing (FC), Low-Power Wide-Area Networks (LPWANs), and Deep Learning (DL) for improved accuracy and efficiency in monitoring and forecasting air quality levels. The three-layered FAQMP system includes a low-cost Air Quality Monitoring (AQM) node transmitting data via LoRa to the Fog Computing layer and then the cloud layer for complex processing. The Smart Fog Environmental Gateway (SFEG) in the FC layer introduces efficient Fog Intelligence by employing an optimized lightweight DL-based Sequence-to-Sequence (Seq2Seq) Gated Recurrent Unit (GRU) attention model, enabling real-time processing, accurate forecasting, and timely warnings of dangerous AQI levels while optimizing fog resource usage. Initially, the Seq2Seq GRU Attention model, validated for multi-step forecasting, outperformed the state-of-the-art DL methods with an average RMSE of 5.5576, MAE of 3.4975, MAPE of 19.1991%, R2 of 0.6926, and Theil's U1 of 0.1325. This model is then made lightweight and optimized using post-training quantization (PTQ), specifically dynamic range quantization, which reduced the model size to less than a quarter of the original, improved execution time by 81.53% while maintaining forecast accuracy. This optimization enables efficient deployment on resource-constrained fog nodes like SFEG by balancing performance and computational efficiency, thereby enhancing the effectiveness of the FAQMP system through efficient Fog Intelligence. The FAQMP system, supported by the EnviroWeb application, provides real-time AQI updates, forecasts, and alerts, aiding the government in proactively addressing pollution concerns, maintaining air quality standards, and fostering a healthier and more sustainable environment.
RESUMO
This paper proposes a novel multi-band textile monopole antenna for patient tracking applications. The designed antenna has compact footprints (0.13λ02) and works in the narrow band-internet of things (NB-IoT) 1.8 GHz, radio frequency identification (RFID), and industrial, scientific, and medical (ISM) 2.45 GHz and 5.8 GHz bands. The impedance bandwidths and gain of the antenna at 1.8 GHz, 2.45 GHz, and 5.8 GHz are 310 MHz, 960 MHz, and 1140 MHz; 3.7 dBi, 5.3 dBi, and 9.6 dBi, respectively. Also, the antenna's behavior is checked on different body parts of the human body in various bending scenarios. As per the evaluated link budget, the designed antenna can easily communicate up to 100 m of distance. The specific absorption rate values of the designed antenna are also within acceptable limits as per the (FCC/ICNIRP) standards at the reported frequency bands. Unlike traditional rigid antennas, the proposed textile antenna is non-intrusive, enhancing user safety and comfort. The denim material makes it comfortable for extended wear, reducing the risk of skin irritation. It can also withstand regular wear and tear, including stretching and bending. The presented denim-based antenna can be seamlessly integrated into clothing and accessories, making it less obtrusive and more aesthetically pleasing.
Assuntos
Internet das Coisas , Dispositivo de Identificação por Radiofrequência , Têxteis , Dispositivos Eletrônicos Vestíveis , Humanos , Dispositivo de Identificação por Radiofrequência/métodos , Tecnologia sem Fio/instrumentação , Desenho de EquipamentoRESUMO
Managing medical devices efficiently was a challenge, especially with manual methods proving error-prone amid staff shortages. To overcome these issues, we developed a novel IoT powerstrip device for tracking usage and location. This helps monitor devices in real-time, empowering more efficient management and utilization. We introduced it in four hospitals, connecting 192 medical devices to the strips and quantitatively confirmed its effectiveness.
Assuntos
Internet das Coisas , Equipamentos e Provisões , HumanosRESUMO
In the context of the rapid development of Internet of Things technology, urban cultural communication and information security have become a new focus in the field of landscape design. This paper innovatively discusses the landscape design of urban cultural communication based on Internet of Things regional information security, aiming at building a safe and culturally rich urban landscape environment. Taking the unique regional culture of Zhangjiajie as an example, this study evaluated the cultural communication effect of landscape design under information security guarantee through in-depth case analysis and field investigation, combined with Internet of Things information security technology. The results show that the cluster head node strategy has significant advantages in resisting physical capture attacks, especially when the number of sensor nodes captured is less than 2000, the information loss rate is less than 0.1. This discovery not only improves the level of information security in the Internet of Things environment, but also provides technical support for the effective dissemination of urban culture. In addition, through the detailed analysis and evaluation of landscape, this study further reveals the important role of landscape design in regional cultural inheritance. To sum up, this study not only provides a new perspective for urban landscape design, but also provides practical guidance for the protection and dissemination of urban culture in the era of Internet of Things.
RESUMO
This review paper delves into the global agricultural food supply chains through the lens of African perspectives, examining the role of blockchain and Internet of Things (IoT) technologies in transforming food traceability. It assesses the applicability and efficacy of these innovations in addressing critical issues such as food fraud, contamination, and systemic inefficiencies from an African viewpoint. By engaging in an in-depth analysis of relevant studies, this work dissects the technical, economic, legal, and operational facets of employing blockchain and IoT in the agri-food sector. The findings illuminate the transformative potential these technologies hold for enhancing food safety and transparency across supply chains. However, the review also brings to light significant hurdles related to scalability, cost-effectiveness, and regulatory frameworks that must be surmounted. Advocating for a context-sensitive application of blockchain and IoT, the paper highlights the importance of adapting these technologies to fit the diverse socio-economic and infrastructural realities prevalent in African countries. Offering valuable insights to stakeholders in agricultural technology and food safety, this comprehensive review outlines a roadmap for future research and strategic implementation efforts aimed at leveraging blockchain and IoT for the development of secure, sustainable food systems.
RESUMO
The desire to increase resource management efficacy in the construction sector is expanding because of measures to reduce costs, boost productivity, and minimize environmental impact. The Internet of Things (IoT) has the potential to alter resource management in the construction sector by delivering real-time data and insights that may assist decision-makers in optimizing resource allocation and usage. Incorporating Internet of Things (IoT) technology into the construction sector will be investigated in this study to discover how resource management is affected. The aim of the study is to identify the essential aspects that promote optimal IoT integration and to investigate how IoT may influence resource management. The relations between variables and their fundamental elements are investigated using structural equation modelling (SEM). In the context of building projects, the study analyses how IoT integration influences resource allocation and utilization, real-time monitoring, and proactive maintenance. The building sector in Malaysia provides concepts on IoT in resource management. Based on this research's outcomes, there is a distinct association between the utilization of IoT technology and effective resource management in the construction sector. IoT adoption is affected by a multiplicity of issues, including data analytics, data security and privacy, integration and interoperability, scalability, and flexibility. This study contributes to addressing considerable gaps in the corpus of information on IoT technology integration in the construction sector. It analyses how IoT may effect resource management, emphasizing how IoT technology may enhance the efficacy of human, mechanical, and material resources.
RESUMO
BACKGROUND: The integration of smart technologies, including wearables and voice-activated devices, is increasingly recognized for enhancing the independence and well-being of older adults. However, the long-term dynamics of their use and the coadaptation process with older adults remain poorly understood. This scoping review explores how interactions between older adults and smart technologies evolve over time to improve both user experience and technology utility. OBJECTIVE: This review synthesizes existing research on the coadaptation between older adults and smart technologies, focusing on longitudinal changes in use patterns, the effectiveness of technological adaptations, and the implications for future technology development and deployment to improve user experiences. METHODS: Following the Joanna Briggs Institute Reviewer's Manual and PRISMA-ScR (Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews) guidelines, this scoping review examined peer-reviewed papers from databases including Ovid MEDLINE, Ovid Embase, PEDro, Ovid PsycINFO, and EBSCO CINAHL from the year 2000 to August 28, 2023, and included forward and backward searches. The search was updated on March 1, 2024. Empirical studies were included if they involved (1) individuals aged 55 years or older living independently and (2) focused on interactions and adaptations between older adults and wearables and voice-activated virtual assistants in interventions for a minimum period of 8 weeks. Data extraction was informed by the selection and optimization with compensation framework and the sex- and gender-based analysis plus theoretical framework and used a directed content analysis approach. RESULTS: The search yielded 16,143 papers. Following title and abstract screening and a full-text review, 5 papers met the inclusion criteria. Study populations were mostly female participants and aged 73-83 years from the United States and engaged with voice-activated virtual assistants accessed through smart speakers and wearables. Users frequently used simple commands related to music and weather, integrating devices into daily routines. However, communication barriers often led to frustration due to devices' inability to recognize cues or provide personalized responses. The findings suggest that while older adults can integrate smart technologies into their lives, a lack of customization and user-friendly interfaces hinder long-term adoption and satisfaction. The studies highlight the need for technology to be further developed so they can better meet this demographic's evolving needs and call for research addressing small sample sizes and limited diversity. CONCLUSIONS: Our findings highlight a critical need for continued research into the dynamic and reciprocal relationship between smart technologies and older adults over time. Future studies should focus on more diverse populations and extend monitoring periods to provide deeper insights into the coadaptation process. Insights gained from this review are vital for informing the development of more intuitive, user-centric smart technology solutions to better support the aging population in maintaining independence and enhancing their quality of life. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): RR2-10.2196/51129.
Assuntos
Dispositivos Eletrônicos Vestíveis , Humanos , Idoso , Pessoa de Meia-Idade , Feminino , Masculino , Idoso de 80 Anos ou mais , Voz , Estudos LongitudinaisRESUMO
The intrusion detection process is important in various applications to identify unauthorized Internet of Things (IoT) network access. IoT devices are accessed by intermediators while transmitting the information, which causes security issues. Several intrusion detection systems are developed to identify intruders and unauthorized access in different software applications. Existing systems consume high computation time, making it difficult to identify intruders accurately. This research issue is mitigated by applying the Interrupt-aware Anonymous User-System Detection Method (IAU-S-DM). The method uses concealed service sessions to identify the anonymous interrupts. During this process, the system is trained with the help of different parameters such as origin, session access demands, and legitimate and illegitimate users of various sessions. These parameters help to recognize the intruder's activities with minimum computation time. In addition, the collected data is processed using the deep recurrent learning approach that identifies service failures and breaches, improving the overall intruder detection rate. The created system uses the TON-IoT dataset information that helps to identify the intruder activities while accessing the different data resources. This method's consistency is verified using the metrics of service failures of 10.65%, detection precision of 14.63%, detection time of 15.54%, and classification ratio of 20.51%.
RESUMO
To transform urban areas into smart cities, various technologies-including software, user interfaces, communication networks, and the Internet of Things (IoT)-must tackle complex sustainability and resilience issues. This study aims to investigate the challenges of rapid urban population growth and explore how Information and Communication Technologies (ICT) can be utilized to foster the development of smart cities. Specifically, it seeks to understand how the integration of ICT can contribute to enhancing urban resilience, promoting urban sustainability, and improving citizens' quality of life. The study relied on a literature review, appraisals of fifteen (15) different Smart City software applications and their characteristics (spanning various domains, including data analytics, the Internet of Things (IoT), urban mobility, energy management, and citizen engagement platforms, all related to sustainability and resilience), and thirty (30) case studies cutting across sustainability and resilience. Furthermore, thematic analysis from the case studies was used to evaluate the benefits of smart city applications mapped to the six (6) action areas of Smart City. Based on the findings from case studies and smart city software analysis, rapid urbanisation presents multifaceted challenges like traffic congestion, disaster management, environmental degradation, community engagement, economic disparities, and so on. However, adopting Smart City software applications and aligning with various domains, including data analytics, the Internet of Things (IoT), urban mobility, energy management, and citizen engagement platforms, play pivotal roles in addressing these challenges. Further findings reveal that the benefits of smart city software align with the action areas of smart cities, including Governance, Mobility, Economy, Environment, Living, and People. The research offers practical application of smart city software for Urban designs and planners. It highlights the influence of contextual factors across countries on Smart City effectiveness. The study advances ICT-driven urban transformation, enhancing the quality of life in fast-growing cities.
RESUMO
The field of biomedical radar has witnessed significant advancements in recent years, paving the way for innovative and transformative applications in clinical settings. Most medical instruments invented to measure human activities rely on contact electrodes, causing discomfort. Thanks to its non-invasive nature, biomedical radar is particularly valuable for clinical applications. A significant portion of the review discusses improvements in radar hardware, with a focus on miniaturization, increased resolution, and enhanced sensitivity. Then, this paper also delves into the signal processing and machine learning techniques tailored for radar data. This review will explore the recent breakthroughs and applications of biomedical radar technology, shedding light on its transformative potential in shaping the future of clinical diagnostics, patient and elderly care, and healthcare innovation.