An advancement of the gravimetric isotope mixture method rendering the knowledge of the spike purity superfluous.

The gravimetric isotope mixture method is the primary method to determine absolute isotope ratios. This method, however, depends on the existence of suitable spike materials and knowledge of their purities. Determining the purity of the spikes can be tedious and labour-intensive. In this publication, an advancement of the gravimetric isotope mixture method, rendering the determination of the purity of the spike materials unnecessary, is presented. The advancement combines mass spectrometry and ion chromatography leading to an approach being independent of the purity of the spike materials. In the manuscript the mathematical background and the basic idea of the novel approach are described using a two-isotope system like copper or lithium.

[Ion chromatography-pulsed amperometry method for determination of trace hydrogen sulfide in air].

Hydrogen sulfide (H2S) is a pervasive gaseous pollutant that emits the characteristic odor of rotten gas, even at low concentrations. It is generated during various industrial processes, including petroleum and natural gas refining, mining operations, wastewater treatment activities, and refuse disposal practices. According to statistics from the World Health Organization (WHO), over 70 occupations are exposed to H2S, rendering it a key monitoring factor in occupational disease detection. Although H2S has legitimate uses in the chemical, medical, and other fields, prolonged exposure to this gas can cause severe damage to the respiratory and central nervous systems, as well as other organs in the human body. Moreover, the substantial release of H2S into the environment can lead to significant pollution. This noxious substance has the potential to impair soil, water, and air quality, while disrupting the equilibrium of the surrounding ecosystems. Therefore, sulfide has become one of the most commonly measured substances for environmental monitoring worldwide. Achieving the stable enrichment and accurate detection of low-level H2S is of great significance. Common methods for detecting this gas include spectrophotometry, chemical analysis, gas chromatography, rapid field detection, and ion chromatography. Although these methods provide relatively reliable results, they suffer from limitations such as high detection cost, low recovery, lack of environmental friendliness, and imprecise quantification of low-concentration H2S. Furthermore, the sampling processes involved in these methods are complex and require specialized equipment and electrical devices. Additionally, approximately 20% of the sulfides in a sample are lost after 2 h in a conventional alkaline sodium hydroxide solution, causing difficulties in preservation and detection. In this study, an accurate, efficient, and cost-saving method based on ion chromatography-pulse amperometry was developed for H2S determination. A conventional IonPac AS7 (250 mm×4 mm) anion-exchange column was employed, and a new eluent based on sodium hydroxide and sodium oxalate was used to replace the original sodium hydroxide-sodium acetate eluent. The main factors influencing the separation and detection performance of the proposed method, including the pulse amperage detection potential parameters and integration time, as well as the type and content of additives in the stabilizing solution, were optimized. The results showed that the proposed method had a good linear relationship between 10 and 3000 µg/L, with correlation coefficients (r2) of up to 0.999. The limits of detection (S/N=3) and quantification (S/N=10) were 1.53 and 5.10 µg/L, respectively. The relative standard deviations (RSDs) of the peak area and retention time of sulfides were less than 0.2% (n=6). The new method exhibited excellent stability, with up to 90% reduction in reagent costs. Compared with conventional ion chromatography-pulse amperometry, this method is more suitable for detecting low concentrations of sulfides in actual samples. Sulfides in a 250 mmol/L sodium hydroxide-0.8% (mass fraction) ethylenediaminetetraacetic acid disodium salt solution were effectively maintained for over 10 h. The new stabilizer significantly improved the reliability of both large-scale and long-term detection. The recovery of the proposed method was investigated by combining the system with a badge-type passive sampler. This sampling method requires no power devices; it is inexpensive, simple to operate, and can realize long-term sampling without the need for skilled personnel. Moreover, it can overcome the influence of short-term changes in pollutant concentration. The sampling results have high reference value for large-scale intervention-less pollutant monitoring in ultraclean rooms, museum counters, and other places. The results demonstrated that the recovery of the proposed method was greater than 95% for the blank sample and 80% for the sample plus standard solution. Finally, the newly established method was applied to determine H2S levels in air samples collected via passive sampling at school garbage stations. The measured results did not exceed the national limit.

[Application of ion chromatographic fingerprint analysis for quality evaluation of tobacco flavors].

Tobacco flavor, an important tobacco additive, is an essential raw material in cigarette production that can effectively improve the quality of tobacco products, add aroma and taste, and increase the suction flavor. The quality consistency of tobacco flavors affects the quality stability of branded cigarettes. Therefore, the quality control of tobacco flavors is a major concern for cigarette and flavor manufacturers. Physical and chemical indices, odor similarity, and sensory efficacy are employed to evaluate the quality of tobacco flavors, and the analysis of chemical components in tobacco flavors is usually conducted using gas chromatography (GC) and high performance liquid chromatography (HPLC). However, because the composition of tobacco flavors is complex, their quality cannot be fully reflected using a single component or combination of components. Therefore, establishing an objective analytical method for the quality control of tobacco flavors is of extreme importance. Chromatographic fingerprint analysis is routinely used for the discriminative analysis of tobacco flavors. Chromatographic fingerprints refer to the general characteristics of the concentration profiles of different chemical compounds. In the daily procurement process, fingerprints established by GC and HPLC are effective for the evaluation and identification of tobacco flavors. However, given continuous improvements in aroma-imitation technology, some flavors with high similarity cannot be directly distinguished using existing methods. In this study, a method for the determination of organic acids and inorganic anions in tobacco flavors based on ion chromatography (IC) was developed to ensure the quality consistency of tobacco flavors. A 1.0 g sample of tobacco flavors and 10 mL of deionized water were mixed and vibrated for 30 min. The aqueous sample solution was passed through a 0.45 µm membrane filter and RP pretreatment column in succession to eliminate interferences and then subjected to IC. Standard solutions containing nine organic acids and seven inorganic anions were used to identify the anions in the tobacco flavors, and satisfactory reproducibility was obtained. The relative standard deviations (RSDs) for retention times and peak areas were <0.71% and <6.02%, respectively. The chromatographic fingerprints of four types of tobacco flavors (samples A-D) from five different batches were obtained. Nine tobacco flavor samples from different manufacturers (samples AY1-AY3, BY1-BY2, CY1-CY2, DY1-DY2) were also analyzed to obtain their chromatographic fingerprints. Hierarchical cluster and similarity analyses were used to evaluate the quality of tobacco flavors from different manufacturers. Hierarchical clustering refers to the process of subdividing a group of samples into clusters that exhibit a high degree of intracluster similarity and intercluster dissimilarity. The dendrograms obtained using SPSS 12.0 indicated good quality consistency among the samples in different batches. Samples AY3, BY2, CY2, and DY1 clustered with the batches of standard tobacco flavors. Therefore, hierarchical cluster analysis can effectively distinguish the quality of products from different manufacturers. The Similarity Evaluation System for Chromatographic Fingerprint of Traditional Chinese Medicine (version 2.0) was used to evaluate the similarity between the standard tobacco flavors and products from different manufacturers. Among the samples analyzed, samples AY3, BY2, CY2, and DY1 showed the highest similarity values (>97.7%), which was consistent with the results of the hierarchical cluster analysis. This finding indicates that IC combined with chromatographic fingerprint analysis could accurately determine the quality of tobacco flavors. GC combined with ultrasonic-assisted liquid-liquid extraction was also used to analyze the tobacco flavors and verify the accuracy of the proposed method. Compared with GC coupled with ultrasonic-assisted liquid-liquid extraction, IC demonstrated more significant quality differences among certain tobacco flavors.

Comprehensive review of combustion ion chromatography for the analysis of total, adsorbable, and extractable organic fluorine.

Poly- and perfluoroalkyl substances (PFAS) are a class of persistent organic pollutants whose high stability and appreciable water solubility have led to near-global contamination. PFAS are bioaccumulative toxins that have been linked to a myriad of disorders and have been detected nearly universally in human blood. Liquid chromatography-tandem mass spectrometry is the most frequent method used for quantitation, though this typically only measures a few dozen of the >14 000 known PFAS and has been shown to account for a small portion of the total organic fluorine present. Sum parameter methods such as total, extractable, and adsorbable organic fluorine have emerged as alternative measurements for PFAS determination. Combustion ion chromatography has become the preferred method for organofluorine measurement where the sorbent or extract containing PFAS is combusted and the emitted hydrofluoric acid (HF) is a measure of the cumulative organofluorine present. Herein we critically review the types of organofluorine measurement, their separation from the sample matrix, and key parameters of the analytical instrument that affect sensitivity, reproducibility, and recovery with regards to PFAS analysis.

Separation of iodate, bromide, nitrite, nitrate, and iodide in seawater by ion chromatography using 1-aminoundecyl group chemically bonded silica columns.

The separation and detection of six common inorganic anions (iodate (IO3-), bromate (BrO3-), bromide (Br-), nitrite (NO2-), nitrate (NO3-), and iodide (I-)) in pure water and 35 ‰ artificial seawater were examined by ion chromatography (IC). As packing materials of separation columns, 1-aminoundecyl group chemically bonded silica (AUS) gels were prepared. Separation of the anions in pure water was achieved using separation columns (150 mm × 4.6 mm i.d.) packed with the AUS gels, 0.1 M NaCl + 5 mM phosphate buffer (pH 4.5) as eluent, and a UV detector (wavelength 225 nm). The anions in artificial seawater were separated and detected with a 300 mm-long column without interferences by matrix anions such as chloride (Cl-) and sulfate (SO42-). The stationary phases have high-capacity anion-exchange/hydrophilic/hydrophobic interaction mixed-modes. The IC system was applied to five inorganic anions, IO3-, Br-, NO2-, NO3-, and I- in seawater of the Seto-Inland Sea, Japan. The detection limits (DLs, S/N = 3) were 11 µg L-1 (IO3-), 93 (Br-), 1.3 (NO2-), 1.4 (NO3-), and 1.1 (I-) for a 100-µL sample injection.

Highly sensitive two-dimensional ion chromatography mass spectrometry method for nitrite determination in hydroxypropyl methylcellulose.

Due to their potential adverse health effects, some N-nitrosamines in drug products are strictly regulated with very low maximum daily intake limits. Nitrosamines can be formed from the reaction of nitrite and secondary or tertiary amines when both species co-exist in the drug synthesis or formulation process. One key strategy to mitigate nitrosamine risk in drugs is to select low-nitrite containing pharma excipients for formulation. It is necessary to develop a sensitive method for trace nitrite determination in pharma excipients as it enables drug producers to study nitrosamine formation kinetics and select excipient suppliers. This study details the development and validation of a two-dimensional ion chromatography mass spectrometry (2D-IC/MS) method for trace nitrite determination in hydroxypropyl methylcellulose (HPMC), one of the most important pharmaceutical excipients used in many drug formulations. The 2D-IC system was operated in heart-cutting mode with a concentrator column coupling the two dimensions. A standard bore anion-exchange column was used in the first dimension (1D) to enable a large volume injection for increased sensitivity and provide improved resolution between nitrite and the interfering chloride peak. A high efficiency microbore anion-exchange column with different selectivity was used in the second dimension (2D) to resolve nitrite from other interfering species. The use of 2D-IC resulted in significantly improved resolution, solving the sensitivity loss issue due to ion suppression from an otherwise 1D separation. MS detection with selective ion monitoring and isotope labeled nitrite internal standard further improve the method specificity, accuracy, and ruggedness, as compared with conductivity detection. For trace determination, it is also extremely important to have a clean blank. For this purpose, a novel cleaning procedure using a strong anion wash was developed to remove nitrite contamination from labware. The optimized method was validated with linearity of nitrite in the concentration range of 18.5-5005.8 ng/g having a regression coefficient of >0.9999, precision with RSD at 3.5-10.1 % and recovery of 90.5-102.4 %. The limit of detection and limit of quantitation were 8.9 and 29.6 ng/g relative to the HPMC sample, or equivalent to 89 and 296 pg/g in the sample solution, respectively.

Ion Chromatography and Related Techniques in Carbohydrate Analysis: A Review.

Ion chromatography and related techniques have been the most popular separation methods used in the determination of organic and inorganic anions and cations, predominantly in water and wastewater samples. Making progress in their development and introducing new stationary phases, methods of detection and preparation of samples for analyses have given rise to the broadening of their analytical range. Nowadays, they are also used for substances that are not ionic by nature but can convert to such forms under certain conditions. These encompass, among others, carbohydrates, whose role and significance in humans' lives and environment is invaluable. Their presence in the air is mostly due to the industrial burning of biomass for energy production purposes. In addition, the content of sugars in plants, fruits and vegetables, constituting the base of human diets, affects our health condition. Given that, there is not only a need for their determination by means of routine methods but also for searching for novel analytical solutions. Based on literature data from the past decade, this paper presents the possibilities and examples of applications regarding ion chromatography and related techniques for the determination of carbohydrates in environmental samples, biomass and plants constituting food or raw materials for food production. Attention has been paid to the virtues and limitations of the discussed separation methods in this respect. Moreover, perspectives on their development have been defined.

Pretreatment methods in ion chromatography: A review.

As an advanced analytical technology, Ion Chromatography (IC) has been widely used in various fields. At present, it is faced with the challenges of sample complexity and instrument precision. It is necessary to select appropriate pretreatment methods to achieve sample preparation and protect the instruments. Therefore, this paper reviews several commonly used sample pretreatment technologies in IC, focusing on sample digestion and purification techniques. Additionally, we introduce some advanced IC technologies and automatic sample processing devices. We provide a comprehensive summary of the basic principles, primary applications and the advantages and disadvantages of each method. Pretreatment methods should be carefully selected and optimized on the specific characteristics of the sample and the ions to be measured, in order to achieve better analysis results.

Glyphosate and other plant protection products in size-segregated urban aerosol: Occurrence and dimensional trend.

Plant protection products (PPPs) play a fundamental role in the maintenance of agricultural fields and private/public green areas, however they can contaminate zones nearby the application point due to wind drift, resuspension, and evaporation. Several studied have deepened the relationship between PPPs and living beings' health, suggesting that these products might have a negative influence. Some PPPs belong to the class of Emergent Contaminants, which are compounds whose knowledge on the environmental distribution and influence is limited. These issues are even more stressed in urban aerosol, due to the high residential density that characterizes this area. Therefore, this study assessed the contamination caused by polar PPPs, such as herbicides (i.e., Glyphosate), fungicides (i.e., Fosetyl Aluminium), and growth regulators (i.e. Maleic Hydrazide), in size-segregated urban aerosol and evaluated their concentration variability with respect to atmospheric parameters (humidity, temperature, rain). Moreover, hypotheses on possible sources were formulated, exploiting also back-trajectories of air masses. A total of six PPPs were found in the samples: glyphosate was more present in the coarse fraction (2.5-10 µm), Fosetyl Aluminium, chlorate and perchlorate were more present in the coarse/fine fractions (10-1 µm), while cyanuric acid and phosphonic acid were mostly concentrated in the fine/ultrafine fractions (<1 µm). While for the first four we suspect of local sources, such as private gardening, the two latter might derive from the entire Po Valley, a highly polluted area in the North of Italy, and from degradation of other substances.

A study into the natural occurrence of inorganic ions relevant to forensic explosives investigations on human hands.

The natural occurrence of 16 inorganic ions relevant to forensic explosives investigations on human hands was studied to support the evaluation of activity-level propositions when such traces are found on the hands or in the fingerprints of a suspect. A total of 594 hand swab extracts from 297 participants throughout Europe and the United States of America were analyzed using Ion Chromatography - Mass Spectrometry. The data provides a reference framework for future covert investigations and forensic casework. The results indicate that thiocyanate, chlorate, nitrite, lithium, strontium, and barium are rarely detected on the hands of individuals who have had no direct contact with explosives (P<0.03) and in quantities below 6 µg. Perchlorate contamination sporadically occurs without deliberately handling perchlorates (P=0.03), albeit at low levels (<12 µg). It also seems that the presence of perchlorate on hands is generally related to professions that involve explosives. Detecting substantial amounts of any of these rare ions on a suspect's hands would require a specific explanation. Because legitimate activities exist that can also result in elevated levels of ions of interest on hands, the context surrounding their presence has to be carefully assessed for each individual case.

Analysis of highly polar anionic pesticides in food of plant and animal origin by ion chromatography and tandem mass spectrometry with emphasis on addressing adverse effects caused by matrix co-extractives.

Residues of various highly polar pesticides and their metabolites are commonly found in numerous food products. Some of these compounds, such as glyphosate, are not only used in large amounts in agriculture, but are also controversially discussed in public. Here, we present a method, employing ion chromatography (IC) coupled to tandem mass spectrometry (IC-MS/MS), for the analyses of glyphosate, aminomethyl phosphonic acid (AMPA), N-acetyl-glyphosate (NAGly), fosetyl, and 10 further highly polar pesticides and metabolites in various plant and animal matrices following a minimal sample preparation by means of the QuPPe method. Thorough investigations showed that an AS19 column enabled the analysis of all 14 compounds within 30 min. The best sensitivity could be obtained with the make-up solvent acetonitrile being admixed to the mobile phase at a 1:2 flow rate ratio. Matrix effects were thoroughly studied in terms of ion suppression and retention time shifts. Conductivity detection was used to monitor elution profiles of matrix co-extractives in comparison with matrix effect profiles obtained by continuous post-column infusion of a mix with 13 highly polar pesticides and metabolites. These tests indicated that a fivefold dilution of QuPPe extracts was suitable for the routine analysis of samples for MRL-conformity, as it considerably reduced matrix effects maintaining sufficient sensitivity and high recovery rates in eight different commodities. The suitability of the final method for its application in routine analysis was verified by the analysis of >130 samples containing incurred residues where the results were compared with two existing LC-MS/MS methods.

[Simultaneous detection of lower aliphatic amines and conventional cations in atmospheric PM2.5 particulates by ion chromatography].

Many amine pollutants exist in the atmosphere. Lower aliphatic amines promote the formation and growth of particles into PM2.5, which damages the heart, lungs, and kidneys of the human body. PM2.5, a common atmospheric particulate pollutant with complex compositions, is the main cause of haze weather. Therefore, measuring the contents of lower aliphatic amines and cations in PM2.5 is of great significance for monitoring environmental air quality and protecting human health. This study established a suppressed ion-chromatographic method with conductivity for the simultaneous detection of four lower aliphatic amines (methylamine, dimethylamine, trimethylamine, and ethylamine) and five cations (Na+, N[Formula: see text], and Ca2+ showed high concentrations. The contents of the four lower aliphatic amines were low; however, the ethylamine content in some samples was high. The results indicate that the proposed method meets the quantification requirements for cations and lower aliphatic amines in PM2.5, with simple processing, high sensitivity, and good accuracy. It can quickly and accurately detect a large number of samples and be used to assess the pollution of small particles in the air as well as trace pollution sources to protect human health.

[Simultaneous determination of eight organic amines in desulfurization solution by ion chromatography].

The applications of organic-amine desulfurization have steadily increased owing to its high efficiency, low cost, and low energy consumption. Different proportions of organic amines exert different effects on sulfur dioxide removal. Therefore, the accurate determination of different organic amines in the desulfurization solution is of great importance. The ion-chromatographic method for the detection of organic amines does not require a derivatization step, has simple pretreatment procedures, and allows for the simultaneous determination of many types of organic amines. In this study, a method based on ion chromatography was developed for the simultaneous determination of ethanolamine (MEA), diethylethanolamine (DEEA), n-methyldiethanolamine (MDEA), 2-amino-2-methyl-1-propanol (AMP), hydroxyethylethylenediamine (AEEA), piperazine (PZ), n-hydroxyethylpiperazine (HEPZ), and diethylenetriamine (DETA). The separation efficiency of the eight organic amines in different types of columns, leaching solutions, and column temperatures were compared. The determination was performed using an IonPac CS17 column with column temperature of 35 ℃ and gradient leaching with methyl sulfonic acid (MSA) solution via the inhibition conductance method. Samples of the desulfurization solution were analyzed using ultrapure water filtered through a 0.22 µm nylon microporous filter membrane and an OnGuard Ⅱ RP column; thus, the pretreatment steps are simple. The eight organic amines showed a good linear relationship within a certain concentration range, and the coefficient of determinations (R2) were greater than 0.998. The limits of detection (LODs) and quantification (LOQs) were determined from the mass concentrations of the organic amines corresponding to signal-to-noise ratios (S/N) of 3 and 10, respectively. LODs of 0.02-0.08 mg/L and LOQs of 0.07-0.27 mg/L were determined from a 1.0 µL sample injection. The actual recoveries ranged from 93.0% to 111%, and the relative standard deviations (RSDs, n=5) ranged from 0.31% to 1.2%. The results indicated that the proposed method has good accuracy and precision; thus, it is suitable for the determination of various organic amines in desulfurization solution.

Towards elevated perfluorooctanoic acid (PFOA) enrichment in water: Sequential liquid-liquid extraction pretreatment for ion chromatography detection.

The widespread detection of perfluorooctanoic acid (PFOA) in the environment has raised significant concerns. The standard PFOA analytical method relies on expensive solid-phase extraction (SPE) and liquid chromatography tandem mass spectrometry (LC-MS/MS) instruments, making routine use prohibitive. We herein proposed a cost-effective yet novel enrichment method for determining PFOA at ng L-1 level. This method entailed a two-step sample preparation process: firstly, PFOA was extracted and enriched using a forward-extraction under acidic conditions, followed by a backward-extraction and enrichment step utilizing alkaline water. The enriched samples were subsequently subjected to a common ion chromatography (IC). Results reveal that maintaining a forward-extraction pH below its pKa value (2.8) is essential, as protonated PFOA proves effective in enhancing the enrichment factor (EF). The challenge lied in driving PFOA from forward-extractant to aqueous backward-extractant due to the decreased hydrophobicity of deprotonated PFOA (log Kow2 = 1.0). In addition, we found that evaporating forward-extractant with alkaline backward-extractant (containing 5% methanol) reduced potential analytical uncertainties associated with PFOA evaporation and sorption. Under optimal conditions, the method achieved a detection limit of 9.2 ng L-1 and an impressive EF value of 719. Comparison with SPE-LC-MS/MS confirmed the proposed method as a promising alternative for PFOA determination. Although initially targeted for PFOA, the novel methodology is likely applicable to preconcentration of other poly-fluoroalkyl substances.

[Applications of ion chromatography for the analysis of Chinese herbal medicine components].

Ion chromatography (IC) is a novel high performance liquid chromatographic technique that is suitable for the separation and analysis of ionic substances in different matrix samples. Since 1975, it has been widely used in many fields, such as the environment, energy, food, and medicine. IC compensates for the separation limitations of traditional gas chromatography and high performance liquid chromatography and can realize the qualitative analysis and quantitative detection of strongly polar components. This chromatographic technique features not only simple operations but also rapid analysis. The sensors used in IC are characterized by high sensitivity and selectivity, and the technique can simultaneously separate and determine multiple components. Several advances in IC instrumentation and chromatographic theories have been developed in recent years. IC can analyze various types of samples, including ions, sugars, amino acids, and organic acids (bases). Chinese herbal medicines are typically characterized by highly complex chemical compositions and may contain carbohydrates, proteins, alkaloids, and other active components. They also contain toxic residues such as sulfur dioxide, which may be produced during the processing of medicinal materials. Therefore, the analysis and elucidation of the precise chemical constituents of Chinese herbal medicines present key problems that must be resolved in modern Chinese herbal medicine research. In this context, IC has become an important method for analyzing and identifying the complex components of Chinese herbal medicines because this method is suitable for detecting a single active ingredients among complex components. This paper introduces the different types and principles of IC as well as research progress in this technique. As the applications of IC-based methods in pharmaceutical science, cell biology, and microbiology increase, further development is necessary to expand the applications of this technique. The development of innovative techniques has enabled IC technologies to achieve higher analytical sensitivity, better selectivity, and wider application. The components of Chinese herbal medicines can be divided into endogenous and exogenous components according to their source: endogenous components include glycosides, amino acids, and organic acids, while exogenous components include toxic residues such as sulfur dioxide. Next, the applications of IC to the complex components of Chinese herbal medicines in recent decades are summarized. The most commonly used IC technologies and methods include ion exchange chromatography and conductivity detection. The advantages of IC for the analysis of alkaloids have been demonstrated. This method exhibits better characteristics than traditional analytical methods. However, the applications of IC for the speciation analysis of inorganic anions are limited. Moreover, few reports on the direct application of the technique for the determination of the main active substances in Chinese herbal medicines, including flavonoids, phenylpropanoids, and steroids, have been reported. Finally, this paper reviews new IC technologies and their application progress in Chinese herbal medicine, focusing on their prospects for the effective separation and analysis of complex components. In particular, we discuss the available sample (on-line) pretreatment technologies and explore possible technologies for the selective and efficient enrichment and separation of different components. Next, we assess innovative research on solid-phase materials that can improve the separation effect and analytical sensitivity of IC. We also describe the features of multidimensional chromatography, which combines the advantages of various chromatographic techniques. This review provides a theoretical reference for the further development of IC technology for the analysis of the complex chemical components of Chinese herbal medicines.

Comparison of three methods for collecting interstitial fluid from subcutaneous tissue in mini pigs.

Interstitial fluid, owing to its similarity to blood components and higher sensitivity and specificity, finds widespread application in disease diagnosis and tumor marker detection. However, collecting interstitial fluid, particularly from the deep subcutaneous connective tissue, remains challenging.•This study aimed to compare three different collection methods - push-pull perfusion, multi-filament nylon thread implantation, and tissue centrifugation - for collecting interstitial fluid from the subcutaneous connective tissue layer of mini-pigs. High-performance ion chromatography was employed to analyze the conventional cation components in the samples and compare ion composition analysis between the different methods.•Results indicated that while the distribution of conventional cations in the interstitial fluid collected by the three methods was generally consistent, there were slight variations in the detection rates and concentrations of different ions. Hence, suitable collection methods should be selected based on the ions or collection sites of interest.

Characterisation of Adobe and Mud-Straw for the Restoration and Rehabilitation of Persian Historical Adobe Buildings.

In the restoration or rehabilitation of traditional buildings, compatible materials with known characteristics must be used. However, the existing literature lacks comprehensive studies on the characterisation of Persian mud-straw plaster, focusing primarily on Persian adobe. Moreover, previous research on Persian adobe has primarily employed XRF and XRD tests, neglecting ion chromatography, moisture sorption isotherm determination, and thermogravimetric analysis with differential scanning calorimetry. Consequently, there is a shortage of information regarding the elemental composition, mineralogical characteristics, moisture sorption behaviour, and thermal properties of Persian mud-straw plaster, as well as Persian adobe bricks. This paper aims to address this research gap by examining historical and new adobe bricks and mud-straw plaster used in Iran, utilising a comprehensive array of analytical techniques. The results from XRF analysis reveal relatively similar chemical compositions across all samples, while XRD analysis indicates predominantly similar mineral phases. Ion chromatography results demonstrate higher conductivity and chloride concentrations in the mud-straw samples than the adobe samples, with higher values for new samples than historical ones. Freshly used straw, clay, or soil may have higher chloride concentrations caused by the arid climate and soil salinisation in the area. Additionally, moisture sorption isotherm determination results show that adobe and mud-straw plaster with a higher salt load of chlorides have significantly higher moisture absorption. The increased straw quantity in the samples increases the moisture content. Furthermore, thermogravimetric analysis and differential scanning calorimetry indicate that, at low heating, adobe and mud-straw plaster lose water due to dehydration, and at high heating, they lose carbon dioxide due to decarboxylation. The comprehensive characterisation of Persian adobe and mud-straw plaster in this study fills a significant gap in the literature and offers invaluable insights for informing restoration and rehabilitation processes, ensuring the compatibility of the materials used.

Quantification of Major Inorganic Contaminants in a Mediterranean Coastal Lagoon with a Large Dystrophic Crisis.

In August 2021, the Mar Menor, a saltwater lagoon located in the Region of Murcia (Spain), suffered a tragic environmental episode of dystrophic crisis and anoxia. The appearance of numerous dead fish in different areas of the lagoon over the course of days put all the authorities and the population of the area on alert. This paper shows a case study of what happened in the lagoon in terms of the presence of the most common inorganic pollutants. Measurements of the concentration of nitrogen species, phosphates and main heavy metals were carried out at different sampling sites in the Mar Menor from May 2021 to November 2022. Chemical analyses were carried out for each of the species under study. These analyses provide valuable information about the dystrophic crisis caused by a classic eutrophication process that began with the excessive nutrient input into the Mar Menor. Ion chromatography and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) were used as instrumentation for the quantification of these samples. The species whose values were greatly increased after the tragic episode described above were nitrates. The concentration varied significantly at the different sampling sites throughout the study. On the last sampling date, decreased concentrations of all the species were measured at each of the sampling sites, coinciding with the apparent good state of the lagoon.

Portable IC system enabled with dual LED-based absorbance detectors and 3D-printed post-column heated micro-reactor for the simultaneous determination of ammonium, nitrite and nitrate.

BACKGROUND: The on-site and simultaneous determination of anionic nitrite (NO2-) and nitrate (NO3-), and cationic ammonium (NH4+), in industrial and natural waters, presents a significant analytical challenge. Toward this end, herein a 3D-printed micro-reactor with an integrated heater chip was designed and optimised for the post-column colorimetric detection of NH4+ using a modified Berthelot reaction. The system was integrated within a portable and field deployable ion chromatograph (Aquamonitrix) designed to separate and detect NO2- and NO3-, but here enabled with dual LED-based absorbance detectors, with the aim to provide the first system capable of simultaneous determination of both anions and NH4+ in industrial and natural waters. RESULTS: Incorporating a 0.750 mm I.D. 3D-printed serpentine-based microchannel for sample-reagent mixing and heating, the resultant micro-reactor had a total reactor channel length of 1.26 m, which provided for a reaction time of 1.42 min based upon a total flow rate of 0.27 mL min-1, within a 40 mm2 printed area. The colorimetric reaction was performed within the micro-reactor, which was then coupled to a dedicated 660 nm LED-based absorbance detector. By rapidly delivering a reactor temperature of 70 °C in just 40 s, the optimal conditions to improve reaction kinetics were achieved to provide for limits of detection of 0.1 mg L-1 for NH4+, based upon an injection volume of just 10 µL. Linearity for NH4+ was observed over the range 0-50 mg L-1, n = 3, R2 = 0.9987. The reactor was found to deliver excellent reproducibility when included as a post-column reactor within the Aquamonitrix analyser, with an overall relative standard deviation below 1.2 % for peak height and 0.3 % for peak residence time, based upon 6 repeat injections. SIGNIFICANCE: The printed post-column reactor assembly was integrated into a commercial portable ion chromatograph developed for the separation and detection of NO2- and NO3-, thus providing a fully automated system for the remote and simultaneous analysis of NO2-, NO3-, and NH4+ in natural and industrial waters. The fully automated system was deployed externally within a greenhouse facility to demonstrate this capability.

Determination of phosphorus in commercially available milk using ion chromatography with perchloric acid deproteinization.

Suppressed ion chromatography with perchloric acid deproteinization was developed for the determination of phosphorus in commercially available milk. Although the perchloric acid deproteinization method is widely used in the medical field, it sees limited application in the food industry. Herein, the concentration of perchloric acid and hydrolysis conditions were examined, specifically regarding perchloric acid deproteinization, which was used as a deproteinization method in this study. The calibration curve constructed from the peak area of orthophosphoric acid (monohydrogen phosphate ion: HPO42-) was linear, with a correlation coefficient of 0.999. The relative standard deviation of the peak area of 50 mg/L of HPO42- from six replicates was 0.35%. The detection and quantitative limits of HPO42-, calculated from its signal-to-noise ratio were 0.033 mg/L and 0.100 mg/L, respectively. The proposed method was applied to the analysis of phosphorus in commercially available milk. Perchloric acid deproteinization has proved to be useful in the food industry.