Camellia Oleifera oil-loaded chitosan nanoparticles embedded in hydrogels as cosmeceutical products with improved biological properties and sustained drug release.

Hydrogels based on poly(vinyl alcohol), silk sericin, and gelatin containing Camellia oleifera oil (CO)-loaded chitosan nanoparticles (CSNPs) were fabricated. The loading of CO into CSNPs was achieved by a two-step procedure, which included an oil-in-water emulsion and an ionic gelation method. SEM images of CO-loaded CSNPs illustrated the spherical shape with aggregation of the nanoparticles. The particle size and polydispersity index were 541-1089 nm and 0.39-0.65, respectively. The encapsulation efficiency and loading capacity were 3-16 % and 4-6 %, respectively. The gelatin/poly(vinyl alcohol)/sericin hydrogels were fabricated and incorporated with CO or CO-loaded CSNPs with different concentrations of CO-loaded CSNPs. All hydrogels demonstrated a porous structure. Besides, the hydrogels containing CO-loaded CSNPs showed a more controlled and sustained release profile than the hydrogels containing CO. Moreover, the hydrogels showed tyrosinase inhibition (9-13 %) and antioxidant activity (37-60 %). Finally, the hydrogels containing CO-loaded CSNPs were non-toxic to the Normal Human Dermal Fibroblasts and NCTC clone 929 cells, even at a high dosage of 50 mg/mL. As a result, these hydrogels exhibited excellent potential for use in cosmeceutical industries.

Edoxaban enfolded beta-1,4-Poly-D-glucosamine nanoparticles for targeting ponym Stuart-Prower factor for treatment of venous thrombosis.

The present research looked for ways to develop shielded nanoparticles (NPs)-drug transporters made of chitosan (CS) to enhance the bioavailability of Edoxaban tosylate monohydrate (ETM) for oral administration by examining the correlation among design aspects and data from experiments using response surface methodology. ETM-loaded CS nanoparticles (ETM-CS-NPs) were developed using the ionic gelation of CS with tripolyphosphate (TPP). Utilizing Zeta-sizer and scanning electron microscopy, the ETM-CS-NPs were evaluated for particle size (PS), zeta potential (ZP), surface morphology, polydispersity index (PDI), entrapment efficiency (EE), and drug loading (DL). Drug and polymer interactions in NPs were assessed using Fourier transform infrared spectroscopy. The response surface approach and Design-Expert software optimized the ETM-CS-NPs. Using response surface methodology, the effects of independent variables such as the amount of CS, the amount of TPP, and the amount of glacial acetic acid on PS, PDI, and ZP were analyzed. The optimal combination of PS (354.8 nm), PDI (0.509), ZP (43.7 + mV), % EE (70.3 ± 1.3), and % DL (9.1 ± 0.4) has been identified for the optimized ETM-CS-NPs. ETM-CS-NPs' anticoagulant activity was evaluated using activated partial thromboplastin time (aPTT), prothrombin time (PT), and thrombin time (TT) assays. In conclusion, a practical and consistent method has been established, and its application has been proven in vitro, indicating its utility for future studies of the biological distribution of ETM-CS-NPs in vivo for specific antithrombotic treatments.

Encapsulated pomegranate peel extract as a potential antimicrobial ingredient from food waste.

BACKGROUND: Pomegranate peel waste is a valuable reservoir of heat-sensitive total hydrolysable tannins (THT), with potential applications in food and pharmaceuticals. Preserving THT is challenging due to degradation post-extraction. We explore ionic gelation as an encapsulation method to optimize THT utilization. RESULTS: Through external gelation, we optimized the process variables using Box-Behnken design. At 40 g kg-1 sodium alginate, 25 g kg-1 calcium chloride, and 300 g kg-1 pomegranate peel extract (PPE), we achieved an 83.65% encapsulation efficiency. Compared to spray drying, external gelation demonstrated superior performance, with enhanced release percentages and stability. Physical, phytochemical, and release profiles of encapsulates were extensively analysed. External gelation achieved an 87.5% release in 30 min, outperforming spray-dried counterparts (69.7% in 25 min). Encapsulated PPE exhibited robust antibacterial activity against Staphylococcus aureus (ATCC 25923) in powdered infant formula, with a 32 ± 0.01 mm zone of inhibition and 300 µg mL-1 minimum inhibitory concentration. Insights into S. aureus growth curves underlined the mechanism of action via membrane potential alterations. The results of carried investigations also showed that the antibacterial activity of the encapsulated PPE extracts against the targeted organism was identical to the antibacterial activity exhibited by synthetic antibiotics used generally to kill microorganisms in food. Therefore, from the findings, it can be concluded that the PPE encapsulate produced using the external gelation technique at the optimized condition displayed superior storage stability possessing strong antimicrobial activity when compared to encapsulate produced using the spray drying technique. CONCLUSIONS: External gelation emerges as a potent technique for developing effective encapsulates enriched with natural antimicrobials or antibiotics. This approach holds promise for applications in food, pharmaceuticals, and nutraceuticals, enhancing stability and efficacy while reducing reliance on synthetic antibiotics. © 2024 Society of Chemical Industry.

Encapsulation of Active Substances in Natural Polymer Coatings.

Already used in the food, pharmaceutical, cosmetic, and agrochemical industries, encapsulation is a strategy used to protect active ingredients from external degradation factors and to control their release kinetics. Various encapsulation techniques have been studied, both to optimise the level of protection with respect to the nature of the aggressor and to favour a release mechanism between diffusion of the active compounds and degradation of the barrier material. Biopolymers are of particular interest as wall materials because of their biocompatibility, biodegradability, and non-toxicity. By forming a stable hydrogel around the drug, they provide a 'smart' barrier whose behaviour can change in response to environmental conditions. After a comprehensive description of the concept of encapsulation and the main technologies used to achieve encapsulation, including micro- and nano-gels, the mechanisms of controlled release of active compounds are presented. A panorama of natural polymers as wall materials is then presented, highlighting the main results associated with each polymer and attempting to identify the most cost-effective and suitable methods in terms of the encapsulated drug.

Fabrication of Ciprofloxacin-Loaded Sodium Alginate Nanobeads Coated with Thiol-Anchored Chitosan Using B-390 Encapsulator Following Optimization by DoE.

Most infectious diseases of the gastrointestinal tract can easily be treated by exploiting the already available antibiotics with the change in administration approach and delivery system. Ciprofloxacin (CIP) is used as a drug of choice for many bacterial infections; however, long-term therapy and off-site drug accumulation lead to an increased risk of tendinitis and peripheral neuropathy. To overcome this issue, nanotechnology is being exploited to encapsulate antibiotics within polymeric structures, which not only facilitates dose maintenance at the infection site but also limits off-site side effects. Here, sodium alginate (SA) and thiol-anchored chitosan (TC) were used to encapsulate CIP via a calcium chloride (CaCl2) cross-linker. For this purpose, the B-390 encapsulator was employed in the preparation of nanobeads using a simple technique. The hydrogel-like sample was then freeze-dried, using trehalose or mannitol as a lyoprotectant, to obtain a fine dry powder. Design of Experiment (DoE) was utilized to optimize the nanobead production, in which the influence of different independent variables was studied for their outcome on the polydispersity index (PDI), particle size, zeta potential, and percentage encapsulation efficiency (% EE). In vitro dissolution studies were performed in simulated saliva fluid, simulated gastric fluid, and simulated intestinal fluid. Antibacterial and anti-inflammatory studies were also performed along with cytotoxicity profiling. By and large, the study presented positive outcomes, proving the advantage of using nanotechnology in fabricating new delivery approaches using already available antibiotics.

Insights from Syzygium aromaticum Essential Oil: Encapsulation, Characterization, and Antioxidant Activity.

Alginate encapsulates loaded with clove essential oil (CEO) were prepared by ionic gelation, with subsequent freeze-drying. The objective of the present work was to develop a product with the ability to protect CEO against its easy volatility and oxidation. The following techniques were used to characterize the formulations: eugenol release, degree of swelling, GC/MS, TGA/DSC, and SEM. The alginate solution (1.0%) containing different concentrations of CEO (LF1: 1.0%; LF2: 0.5%; LF3: 0.1%) was dropped into a 3.0% CaCl2 solution. After lyophilization, the encapsulated samples were wrinkled and rigid, with high encapsulation power (LF3: 76.9% ± 0.5). Three chemical components were identified: eugenol (the major one), caryophyllene, and humulene. The antioxidant power (LF1: DPPH IC50 18.1 µg mL-1) was consistent with the phenol content (LF1: 172.2 mg GAE g-1). The encapsulated ones were thermally stable, as shown by analysis of FTIR peaks, eugenol molecular structure was kept unaltered. The degree of swelling was 19.2% (PBS). The release of eugenol (92.5%) in the PBS solution was faster than in the acidic medium. It was concluded that the low-cost technology used allows the maintenance of the content and characteristics of CEO in the three concentrations tested, offering a basis for further research with essential oil encapsulates.

Exploring the Nutritional and Bioactive Potential of Olive Leaf Residues: A Focus on Minerals and Polyphenols in the Context of Spain's Olive Oil Production.

Lyophilized plant-origin extracts are rich in highly potent antioxidant polyphenols. In order to incorporate them into food products, it is necessary to protect these phytochemicals from atmospheric factors such as heat, light, moisture, or pH, and to enhance their bioavailability due to their low solubility. To address these challenges, recent studies have focused on the development of encapsulation techniques for antioxidant compounds within polymeric structures. In this study, lyophilized olive leaf extracts were microencapsulated with the aim of overcoming the aforementioned challenges. The method used for the preparation of the studied microparticles involves external ionic gelation carried out within a water-oil (W/O) emulsion at room temperature. HPLC analysis demonstrates a high content of polyphenols, with 90% of the bioactive compounds encapsulated. Meanwhile, quantification by inductively coupled plasma optical emission spectroscopy (ICP-OES) reveals that the dried leaves, lyophilized extract, and microencapsulated form contain satisfactory levels of macro- and micro-minerals (calcium, potassium, sodium). The microencapsulation technique could be a novel strategy to harness the polyphenols and minerals of olive leaves, thus enriching food products and leveraging the antioxidant properties of the polyphenolic compounds found in the lyophilized extract.

Unveiling antioxidant capacity of standardized chitosan-tripolyphosphate microcapsules containing polyphenol-rich extract of Portulaca oleraceae.

The medicinal plant Portulaca oleraceae has a long history of usage in traditional medicine. Plant extracts have several interesting pharmacological effects but have some drawbacks that can be addressed via capsulation with chitosan. This work set out to do just that tally up the antioxidant effects of a polyphenol-rich P. olerace extract and see how capsulation affected them. The reflux extraction and response surface methodology (RSM) were carried out to optimize the phenolic and flavonoid content of P. oleraceae extract. Additionally, high-resolution mass spectrometry was employed to determine the secondary metabolite present in the extract. The microcapsules of extract-loaded chitosan were prepared using the ionic gelation method and characterized in terms of size, encapsulation efficiency (EE), and morphology of microcapsules. Fourier transform infrared (FTIR) was used to observe the successful production of microcapsules with a principal component analysis (PCA) approach. The antioxidant activity of microcapsules was established using the radical scavenging method. According to RSM, the highest amounts of TPC and TFC were obtained at 72.894 % ethanol, 2.031 h, and 57.384 °C. The compounds were employed from the optimized extract of P. oleraceae including phenolics and flavonoids. The microcapsules were secured with a %EE of 43.56 ± 2.31 %. The characteristics of microcapsules were approved for the obtained product's successful synthesis according to the PCA. The microcapsules have antioxidant activity in a concentration-dependent manner (p < 0.0001). The findings of this study underscored the benefits of employing chitosan as a nanocarrier for extract, offering a promising approach to enhance plant-derived therapies.

Characterization of chitosan/Persian gum nanoparticles for encapsulation of Nigella sativa extract as an antiviral agent against avian coronavirus.

The aim of this study was to investigate the physicochemical characteristics of nanoparticles formed by the ionic gelation method between chitosan and water-soluble fraction of Persian gum (WPG) for encapsulation of Nigella sativa extract (NSE) as an antiviral agent. Our findings revealed that the particle size, polydispersity index (PDI), and zeta potential of the particles were in the range of 316.7-476.6 nm, 0.259-0.466, and 37.0-58.1 mV, respectively. The amounts of chitosan and WPG as the wall material and the NSE as the core had a considerable impact on the nanoparticle properties. The proper samples were detected at 1:1 chitosan:WPG mixing ratio (MR) and NSE concentration of 6.25 mg/mL. Fourier-transformed infrared (FTIR) spectroscopy proved the interactions between the two biopolymers. The effect of NSE on infectious bronchitis virus (IBV) known as avian coronavirus, was performed by the in-ovo method determining remarkable antiviral activity of NSE (25 mg/mL) and its enhancement through encapsulation in the nanoparticles. These nanoparticles containing NSE could have a promising capability for application in both poultry industry and human medicine as an antiviral product.

Preparation and assessment of alginate-microencapsulated Trichoderma harzianum for controlling Sclerotinia sclerotiorum and Rhizoctonia solani on tomato.

This study aimed to develop microencapsulation technology using alginate to improve the viability and performance of Trichoderma harzianum. The method of ionic gelation was used to prepare the microparticles, and the efficiency of encapsulation was estimated to be 99%. The average size of the prepared microspheres was 2600 µm (wet) and 1000 µm (dry). Scanning electron microscopy revealed that the microspheres were approximately spherical. Fourier transform infrared spectrophotometer analysis indicated an interaction between T. harzianum and the microspheres. The results of temperature resistance and light stability against ultraviolet radiation emphasized the positive impact of microencapsulation in improving the viability and resistance of T. harzianum compared to the non-microencapsulated state. The disease percentage of Rhizoctonia solani and Sclerotinia sclerotiorum in plants treated with microencapsulated T. harzianum microcapsules was 8.88 % and 20 % respectively, but in the control group was 73.33 % (p ≤ 0.05).

Fabrication and optimization of febuxostat-loaded chitosan nanocarriers for better pharmacokinetics profile.

The current research was planned to enhance the bioavailability of hydrophobic drug after oral administration through the development of a nanoparticle drug delivery system (DDS). Therefore, febuxostat-loaded chitosan nanoparticles (FLC NPs) were prepared using a modified ionic gelation method and optimized the reaction conditions through the design of experiments. Design expert software was used to check the desirability of the central composite design and the interactive effects of the independent variables (chitosan concentration, ratio of chitosan to linker, and pH of the medium) on the response variables (size distribution, zeta potential, polydispersity index (PDI), and entrapment efficiency (EE)) of FLC NPs. All ingredients of the optimized formulation (formulation Q) were compatible with each other as evident from FTIR, PXRD, and TGA studies, and displayed 234.7 nm particle size, 0.158 PDI, 25.8 mV zeta potential, and 76.9 % EE. TEM, SEM, and AFM exhibited a smooth, dense, and uniform structure without any visible pores in the structure of FLC NPs. The in vitro and in vivo drug release studies described a sustained release pattern of febuxostat and increased relative bioavailability by 286.63 %. Considering these findings, this chitosan nanoparticle DDS can further be used for improving the EE and bioavailability of hydrophobic drugs.

Encapsulation of pomegranate polyphenols by ionic gelation: Strategies for improved retention and controlled release.

This study aimed at producing pectin hydrogel beads by ionic gelation proce to carry pomegranate extract (PE) evaluating approaches to increase its retention and protect the polyphenols from environmental conditions that interfere in the stability and color of these compounds, such as the pH of the medium. Several strategies were tested to reduce the mass transfer and consequently increase its retention. The insertion of a filler (gelatinized starch), the employment of different concentrations from the external environment, the adsorption using blank pectin-starch beads, and the electrostatic coating using chitosan were performed. The release of entrapped compounds over time was employed to evaluate the release pattern of PE in water media. Diffusion coefficients calculated from these experiments were then used to estimate the PE release behavior. The encapsulation efficiency (EE) was significantly improved (42 % to 101 %) when equalizing the concentration of the external medium with that from the beads formulation. Furthermore, the increase in the PE concentration was proportional to the rise in the mechanical strength (MS) of the beads which indicates a modification of internal structure due to the presence of polyphenols. The adsorption was efficient in entrapping the active compound, and despite the high PE content observed for all beads (average value of 2960.26 mg of gallic acid equivalent/100 g sample), they had the lowest diffusion coefficient from the release in water media. Finally, the coating was able to reduce the release rate in most of the tests (DAB uncoated = 0.5 DAB coated), however, during the electrostatic deposition a loss of about 32 % of the phenolic compounds in the chitosan solution was observed which led to a reduced EE. Despite the obtention of retarded release, coating studies need to be improved. Some adjustments in the execution of this technique are necessary so that the losses are reduced and the process becomes viable for the use of beads in food.

Starch can act differently when combined with alginate or gellan gum to form hydrogels.

Microgels were tailored by combining starches from different sources (corn, potato or phosphated) and anionic polysaccharides (gellan gum or alginate) using ionic gelation. Rheological analysis pointed out a lower consistency index for alginate-based solutions compared to the gellan-based ones and, therefore, this favored the formation of smaller droplets during the atomization process (58.74 ± 1.72 µm vs. 101.38 ± 2.71 µm). Additionally, it was noticed that the starch granule size isdirectly related to the diameter of the particle formed, both for gellan and alginate systems. The combination between starches and anionic gums still promoted an increase in the water holding capacity, probably due to the presence of additional hydrophilic groups from starch. According to the mechanical properties, starch acts differently when combined with alginate or gellan gum, considering it strengthened the biopolymeric network for the alginate-based gels increasing the stress at rupture values (except for potato starch), while it decreasedthe hardness and elasticity for gellan-based gels. Microparticles based on gellan and alginate showed high anthocyanin encapsulation efficiency (EE ≥ 80%) in all systems. In these cases, the addition of starch did not contribute to increasing this property, even though starch granules filled the gel pores. The high EE showed that the studied systems allow the encapsulation of anthocyanin and suggest possible encapsulation of other hydrophilic bioactive compounds, considering the best type of starch for each application.

Chitosan-Based Nanogels Designed for Betanin-Rich Beetroot Extract Transport: Physicochemical and Biological Aspects.

Nanotechnology has emerged as a possible solution to improve phytochemicals' limitations. The objective of the present study was to encapsulate beetroot extract (BR Ext) within a chitosan (CS)-based nanogel (NG) designed via ionic crosslinking with tripolyphosphate (TPP) for betanin (Bet) delivery, mainly in the ophthalmic environment. BR Ext is rich in betanin (Bet) according to thin layer chromatography (TLC), UV-visible spectroscopy, and HPLC analysis. NG presented a monodisperse profile with a size of 166 ± 6 nm and low polydispersity (0.30 ± 0.03). ζ potential (ζ-Pot) of +28 ± 1 is indicative of a colloidally stable system. BR Ext encapsulation efficiency (EE) was 45 ± 3%. TEM, with the respective 3D-surface plots and AFM, showed spherical-elliptical-shaped NG. The BR Ext release profile was biphasic with a burst release followed by slow and sustained phase over 12 h. Mucoadhesion assay demonstrated interactions between NG with mucin. Moreover, NG provided photoprotection and pH stability to BR Ext. FRAP and ABTS assays confirmed that BR Ext maintained antioxidant activity into NG. Furthermore, in vitro assays using human retinal cells displayed absence of cytotoxicity as well as an efficient protection against injury agents (LPS and H2O2). NGs are a promising platform for BR Ext encapsulation, exerting controlled release for ophthalmological use.

Polysaccharide/Silica Microcapsules Prepared via Ionic Gelation Combined with Spray Drying: Application in the Release of Hydrophilic Substances and Catalysis.

Polysaccharide/silica hybrid microcapsules were prepared using ionic gelation followed by spray-drying. Chitosan and alginate were used as biopolymer matrices, and in situ prepared silica was used as a structuring additive. The prepared microparticles were used in two very different applications: the encapsulation of hydrophilic molecules, and as a support for palladium nanoparticles used as catalysts for a model organic reaction, namely the reduction of p-nitrophenol by sodium borhydride. In the first application, erioglaucine disodium salt, taken as a model hydrophilic substance, was encapsulated in situ during the preparation of the microparticles. The results indicate that the presence of silica nanostructures, integrated within the polymer matrix, affect the morphology and the stability of the particles, retarding the release of the encapsulated substance. In the second application, chloropalladate was complexed on the surface of chitosan microparticles, and palladium(II) was subsequently reduced to palladium(0) to obtain heterogeneous catalysts with an excellent performance.

Influence of Alginate Properties and Calcium Chloride Concentration on Alginate Bead Reticulation and Size: A Phenomenological Approach.

Two types of alginates, AlgLF and AlgP, were used in this study to produce alginate beads by electro-vibratory extrusion. AlgLF and AlgP exhibited different Mannuronate/Guluronate (M/G) ratios and molecular weights as measured by NMR and SEC-MALS. The calcium chloride concentration was found to have the greatest effect on bead size. Higher concentrations resulted in smaller beads. AlgLF with a higher molecular weight and a lower proportion of G blocks showed smaller beads. For both alginates, the bead size was also influenced by the flow rate and vibration frequency. Alginate solution aging showed a minimal effect. Alginate reticulation was modeled using a mathematical equation. The study provides insights for the optimization of alginate-based materials in different applications by shedding light on the main factors influencing bead size. The importance of the molecular weight, M/G ratio and calcium ion concentration in the gelling process is highlighted, providing opportunities for the tailoring of alginate materials through a phenomenological model.

Anti-Candida and Anti-Leishmanial Activities of Encapsulated Cinnamomum verum Essential Oil in Chitosan Nanoparticles.

Nanoencapsulation is widely considered as a highly effective strategy to enhance essential oils' (EO) stability by protecting them from oxidative deterioration and evaporation. The present study aims to optimize and characterize an efficient technique for encapsulating Cinnamomum (C.) verum essential oil into chitosan nanoparticles using response surface methodology (RSM). Moreover, the optimized C. verum EO nanoparticle was investigated for its antibacterial (against Gram-positive and Gram-negative bacteria), antifungal (against Candida albicans), and antiparasitic activity (against Leishmania parasites). Five parameters were investigated using a Plackett-Burman and Box-Behnken statistical design: the chitosan molecular weight, TPP concentration, C. verum EO/chitosan ratio, mixing method, and the duration of the reaction. Encapsulation efficiency and anti-candida activity were considered as responses. The antibacterial, anticandidal, and anti-leishmanial activities were also assessed using a standard micro-broth dilution assay and the cytotoxicity assay was assessed against the macrophage cell line RAW 264.7. The optimized nanoparticles were characterized using Fourier transform infrared spectroscopy, Zeta potential, and scanning electron microscopy. The study results indicated that under optimal conditions, the nanoencapsulation of C. verum EO into chitosan nanoparticles resulted in an encapsulation efficiency of 92.58%, with a regular distribution, a nanoparticle size of 480 ± 14.55 nm, and a favorable Zeta potential of 35.64 ± 1.37 mV. The optimized C. verum EO/chitosan nanoparticles showed strong antifungal activity against C. albicans pathogens (CMI = 125 µg mL-1), notable antibacterial activity against both Gram-positive and Gram-negative bacteria (ranging from 125 to 250 µg mL-1), high leishmanicidal potential against the promastigotes form of L. tropica and L. major (IC50 = 10.47 and 15.09 µg mL-1, respectively), and a four-fold cytotoxicity reduction compared to non-encapsulated essential oil. These results suggest that C. verum EO-loaded chitosan nanoparticles could be a promising delivery system for the treatment of cutaneous Candida albicans infections.

In Vitro Bioaccessibility Assessment of Phenolic Compounds from Encapsulated Grape Pomace Extract by Ionic Gelation.

Grape pomace is a by-product of winemaking characterized by a rich chemical composition from which phenolics stand out. Phenolics are health-promoting agents, and their beneficial effects depend on their bioaccessibility, which is influenced by gastrointestinal digestion. The effect of encapsulating phenol-rich grape pomace extract (PRE) with sodium alginate (SA), a mixture of SA with gelatin (SA-GEL), and SA with chitosan (SA-CHIT) on the bioaccessibility index (BI) of phenolics during simulated digestion in vitro was studied. A total of 27 individual phenolic compounds (IPCs) were quantified by UHPLC. The addition of a second coating to SA improved the encapsulation efficiency (EE), and the highest EE was obtained for SA-CHIT microbeads (56.25%). Encapsulation affected the physicochemical properties (size, shape and texture, morphology, crystallinity) of the produced microbeads, which influenced the delivery of phenolics to the intestine and their BI. Thus, SA-GEL microbeads had the largest size parameters, as confirmed by scanning electron microscopy (SEM), and the highest BI for total phenolic compounds and IPCs (gallic acid, 3,4-dihydroxybenzoic acid and o-coumaric acid, epicatechin, and gallocatechin gallate) ranged from 96.20 to 1011.3%. The results suggest that encapsulated PRE has great potential to be used as a functional ingredient in products for oral administration.

Stability of yerba mate extract, evaluation of its microencapsulation by ionic gelation and fluidized bed drying.

Studies show that yerba mate (Ilex paraguariensis) has high antioxidant capacity occasioned by its high contents of total phenolic compounds. Microencapsulation, specifically ionic gelation, since it does not use heating during process, is considered as an alternative for preserving and applying the extract. The purpose of this study was to evaluate general characteristics and stability of hydroalcoholic extract of yerba mate, conduct the extract microencapsulation by ionic gelation followed by microparticle fluidized bed drying. The extract was evaluated for color stability, total phenolic compounds, and antioxidant activity for nine weeks and at three temperatures (5, 15, and 25 °C). From the extract, a double emulsion (W/O/W), generation of microparticles (ionic gelation by dripping), and fluidized bed drying were conducted. The extract had 32912.55 mg GAE/100 g of phenolic compounds and 2379.49 µmol TE/g of antioxidant activity. The main compound observed was chlorogenic acid (5-CQA) with 0.35 ± 0.01 g/100 mL. In the stability study, the temperature was observed to influence in phenolic compounds reduction, as well as in total color difference of the extract. Double emulsion has shown to be stable and appropriate for use. The values of microparticles total phenolic compounds and antioxidant activity were 423.18 ± 8.60 mg GAE/100 g and 21.17 ± 0.24 µmol TE/g, respectively. After drying, the moisture of microparticles was reduced from 79.2% to 19%. The extract had high total phenolic compound content and high antioxidant activity. Storage at the lowest temperature (5 °C) assured better preservation of extract total phenolic compounds. The dried microparticles showed content of total phenolic compounds and antioxidant activity with potential for commercialization and future application in food matrices.

A Simple Method for Synthesis of Chitosan Nanoparticles with Ionic Gelation and Homogenization.

Chitosan nanoparticles (CNPs) are known to have great utility in many fields (pharmaceutical, agricultural, food industry, wastewater treatment, etc.). In this study we aimed to synthesize sub-100 nm CNPs as a precursor of new biopolymer-based virus surrogates for water applications. We present a simple yet efficient synthesis procedure for obtaining high yield, monodisperse CNPs with size 68-77 nm. The CNPs were synthesized by ionic gelation using low molecular weight chitosan (deacetylation 75-85%) and tripolyphosphate as crosslinker, under rigorous homogenization to decrease size and increase uniformity, and purified by passing through 0.1 µm polyethersulfone syringe filters. The CNPs were characterized using dynamic light scattering, tunable resistive pulse sensing, and scanning electron microscopy. We demonstrate reproducibility of this method at two separate facilities. The effects of pH, ionic strength and three different purification methods on the size and polydispersity of CNP formation were examined. Larger CNPs (95-219) were produced under ionic strength and pH controls, and when purified using ultracentrifugation or size exclusion chromatography. Smaller CNPs (68-77 nm) were formulated using homogenization and filtration, and could readily interact with negatively charge proteins and DNA, making them an ideal precursor for the development of DNA-labelled, protein-coated virus surrogates for environmental water applications.