Construction of electrochemical immunosensor from MXene/multi-walled carbon nanotubes/gold nanoparticles for specific detection of carcinoembryonic antigen.

With the advancement of nanotechnology, various types of nanomaterials have been integrated into electrochemical immunoelectrodes to enhance their performance. Among these, MXene stands out as a promising candidate due to its high electron transfer capacity and abundant surface chemical groups. However, the improvement in electrode performance is often hindered by the self-restacking and agglomeration of MXene. To address this issue, multi-walled carbon nanotubes (MWCNTs) were selected to form composites with MXene. Subsequently, a label-free immunosensor, BSA/Ab/AuNPs/MXene-MWCNTs-Nafion/ITO, was fabricated for specific detection of carcinoembryonic antigen (CEA), a widely used tumor marker. The results demonstrated that the incorporation of MWCNTs can effectively prevent the self-stacking of MXene. Moreover, the composites enhanced the loading of gold nanoparticles (AuNPs) to connect the antibodies, thereby improving electronic transmission signals and sensitivity. The sensor exhibited excellent analytical performance towards CEA with a wide linear range (0.050 to 200 ng mL-1) and a low limit of detection of 0.015 ng mL-1 (S/N = 3). The possibility of it being applied in clinical trials was verified by using ELISA and differential pulse voltammetry (DPV) assays to detect CEA in serum samples. The recoveries ranged from 95.34 to 102.09% with relative standard deviations (RSDs) below 5.00%. Furthermore, the sensor displayed satisfactory selectivity, repeatability, and stability. We hope the findings highlight promising prospects for advanced immunosensor development and alternative strategies in cancer diagnosis.

Aggregation-induced electrochemiluminescence based on intramolecular charge transfer and twisted molecular conformation for label-free Immunoassay.

Organic emitters with exceptional properties exhibit significant potential in the field of aggregation-induced electrochemiluminescence (AIECL); however, their practicality is impeded by limited ECL efficiency (ΦECL). This paper investigates a novel type of AIECL emitter (BDPPA NPs), where an efficient intramolecular charge transfer (ICT) effect and highly twisted conformation contribute to a remarkable enhancement of ECL. The ICT effect reduces the electron transfer path, while the twisted conformation effectively restricts π-π stacking and intramolecular motions. Intriguingly, compared to the standard system of [Ru(bpy)32+]/TPrA, bright emissions with up to 54 % ΦECL were achieved, enabling direct visual observation of ECL through the co-reactant route. The label-free immunosensor exhibited distinguished performance in detecting SARS-CoV-2 N protein across an exceptionally wide linear range of 0.001-500 ng mL-1, with a remarkably low detection limit of 0.28 pg mL-1. Furthermore, this developed ECL platform exhibited excellent sensitivity, specificity, and stability characteristics, providing an efficient avenue for constructing platforms for bioanalysis and clinical diagnosis analysis.

Disposable label-free electrochemical immunosensor based on gold nanoparticles-Prussian blue for neutrophil gelatinase-associated lipocalin detection in urine samples.

Neutrophil gelatinase-associated lipocalin (NGAL) is a remarkable biomarker for assessing acute kidney injury. In this study, we developed a novel label-free NGAL electrochemical immunosensor based on gold nanoparticles (AuNPs) and Prussian blue (PB) without an external mediator. The AuNPs-PB based immunosensor was fabricated on a custom gold-electrode (AuE)-based polypropylene (PP) substrate. We systematically assessed and optimized key experimental parameters, including the process of AuNPs-PB electrodeposition, antibody concentration, and incubation time. The immunosensor response toward NGAL was determined using differential pulse voltammetry, where the decrease in the oxidation current response of the PB redox probe correlating with the increase in NGAL concentration. Our results demonstrated that the synergistic benefits of both AuNPs and PB significantly improved electrochemical activity for NGAL detection and provided a highly stable sensor across a range of pH values. The label-free immunosensor exhibited two linear ranges: 0.10-1.40 ng mL-1 and 1.40-25.0 ng mL-1, with a low detection limit of 0.094 ng mL-1. The developed NGAL immunosensor displayed high selectivity and excellent reproducibility. Furthermore, NGAL detection was completed within 30 min and the immunosensor exhibited storage stability for six weeks. Notably, NGAL levels determined in human urine samples using this developed label-free immunosensor showed good agreement with the results obtained from the enzyme-linked immunosorbent assay. This novel label-free NGAL immunosensor provides great potential in developing NGAL point-of-care testing applications.

Phage Display's Prospects for Early Diagnosis of Prostate Cancer.

Prostate cancer (PC) is the second most diagnosed cancer among men. It was observed that early diagnosis of disease is highly beneficial for the survival of cancer patients. Therefore, the extension and increasing quality of life of PC patients can be achieved by broadening the cancer screening programs that are aimed at the identification of cancer manifestation in patients at earlier stages, before they demonstrate well-understood signs of the disease. Therefore, there is an urgent need for standard, sensitive, robust, and commonly available screening and diagnosis tools for the identification of early signs of cancer pathologies. In this respect, the "Holy Grail" of cancer researchers and bioengineers for decades has been molecular sensing probes that would allow for the diagnosis, prognosis, and monitoring of cancer diseases via their interaction with cell-secreted and cell-associated PC biomarkers, e.g., PSA and PSMA, respectively. At present, most PSA tests are performed at centralized laboratories using high-throughput total PSA immune analyzers, which are suitable for dedicated laboratories and are not readily available for broad health screenings. Therefore, the current trend in the detection of PC is the development of portable biosensors for mobile laboratories and individual use. Phage display, since its conception by George Smith in 1985, has emerged as a premier tool in molecular biology with widespread application. This review describes the role of the molecular evolution and phage display paradigm in revolutionizing the methods for the early diagnosis and monitoring of PC.

One-pot wet-chemical fabrication of 3D urchin-like core-shell Au@PdCu nanocrystals for electrochemical breast cancer immunoassay.

Carbohydrate antigen 15-3 (CA15-3) is an important biomarker for early diagnosis of breast cancer. Herein, a label-free electrochemical immunosensor was built based on three-dimensional (3D) urchin-like core-shell Au@PdCu nanocrystals (labeled Au@PdCu NCs) for highly sensitive detection of CA15-3, where K3[Fe(CN)6] behaved as an electroactive probe. The Au@PdCu NCs were synthesized by a simple one-pot wet-chemical approach and the morphology, structures, and electrocatalytic property were investigated by several techniques. The Au@PdCu NCs prepared worked as electrode material to anchor more antibodies and as signal magnification material by virtue of its exceptional catalytic property. The developed biosensor exhibited a wide linear detection range from 0.1 to 300 U mL-1 and a low limit of detection (0.011 U mL-1, S/N = 3) for determination of CA15-3 under the optimal conditions. The established biosensing platform exhibits some insights for detecting other tumor biomarkers in clinical assays and early diagnosis.

Study of an Ultrasensitive Label-Free Electrochemiluminescent Immunosensor Fabricated with a Composite Electrode for Detecting the Glutamate Decarboxylase Antibody.

Antibody testing for the glutamic acid decarboxylase 65 antibody (GADA) is widely used as a golden standard for autoimmune diabetes diagnosis, while current methods for antibody testing are not sensitive enough for clinical usage. Here, a label-free electrochemiluminescent (ECL) immunosensor for detecting GADA in autoimmune diabetes is fabricated and investigated. In the designed immunosensor, a composite film including the multiwalled carbon nanotubes (MWCNTs), zinc oxide (ZnO), and Au nanoparticles (AuNPs) was prepared through nanofabrication processes to improve the performance of sensor. The MWCNTs, which can provide a larger specific surface area, ZnO as a good photocatalytic material, and AuNPs that can enhance the ECL signal of luminol and immobilize the GAD65 antigen were applied to prefunctionalize indium tin oxide (ITO) glass based on a nanofabrication process. The GADA concentration was detected using the ECL immunosensor after incubating with GAD65 antigen-coated prefunctionalized ITO glass. After a direct immunoreaction, it is found that the degree of decreased ECL intensity has a good linear regression toward the logarithm of the GADA concentration in the range of 0.01 to 50 ng mL-1 with a detection limit down to 10 pg mL-1. Human serum samples positive or negative for GADA all nicely fell in the expected area. The fabricated immunosensor with excellent sensitivity, specificity, and stability has potential capability for clinical usage in GADA detection.

Flower-like WSe2 used as bio-matrix in ultrasensitive label-free electrochemical immunosensor for human immunoglobulin G determination.

The abnormal concentrations of human immunoglobulin G (hIgG) refers to many kinds of diseases. Analytical methods with the characteristics of rapid response, easy operation and high sensitivity should be designed to accurately determinate the hIgG levels in human serum. In this work, a label-free electrochemical immunosensor based on WSe2/rGO was developed to sensitively detect human immunoglobulin G. First, the flower-like transition metal dichalcogenides (TMDCs) Tungsten Diselenide (WSe2) with large effective specific surface area and porous structure was synthesized by hydrothermal synthesis. As a bio-matrix, the flower-like WSe2 efficiently increased the active sites for loading antibodies. Meanwhile, reduced graphene oxide (rGO) obtained by tannic acid reduction was used to improve the current response of the sensing interface. WSe2 was combined with rGO and the electrochemical active surface area (ECSA) of the sensing interface was enlarged to 2.1 times that of GCE. Finally, the combination of flower-like WSe2 and rGO broadened the detection range and reduced the detection limit of the sensing platform. The immunosensor exhibited a high sensitivity with a wide linear range of 0.01-1000 ng/mL and low detection limit of 4.72 pg/mL. The real sample analysis of hIgG were conducted under optimal conditions, and the spiked recovery rates were between 95.5 and 104.1%. Moreover, satisfactory results were obtained by testing the stability, specificity and reproducibility of the immunosensor. Therefore, it can be concluded that the as-proposed immunosensor has the application potential of clinical analyze of hIgG in human serum.

Label-free immunosensing of telomerase using bio-conjugation of biotinylated antibody to poly(chitosan) gold nanoparticles.

Aim: This study aimed to establish a label-free electrochemical biosensor for telomerase detection in human biofluid. Method: Synthesized green nanocomposite (poly[chitosan] decorated by gold nanoparticles) was used for the efficient immobilization of biotinylated antibody of telomerase and immunocomplex of antigen-antibody. Poly(chitosan) was decorated by gold nanoparticles on the surface of a glassy carbon electrode using an electrochemical coating technique. Results: The constructed immunosensor exhibited wide dynamic range (0.078-160 IU/ml-1) with a low limit of quantification of 0.078 IU/ml-1, which present a unique manner for telomerase assays in early prognosis for cancers. Conclusion: This study encourages scientists and scholars to design and develop new biosensor platforms for point-of-care diagnostics for telomerase management, an interesting reference for future research.

Role of Defects of Carbon Nanomaterials in the Detection of Ovarian Cancer Cells in Label-Free Electrochemical Immunosensors.

Developing label-free immunosensors to detect ovarian cancer (OC) by cancer antigen (CA125) is essential to improving diagnosis and protecting women from life-threatening diseases. Four types of carbon nanomaterials, such as multi-wall carbon nanotubes (MWCNTs), vapor-grown carbon fiber (VGCFs), graphite KS4, and carbon black super P (SP), have been treated with acids to prepare a carbon nanomaterial/gold (Au) nanocomposite. The AuNPs@carbon nanocomposite was electrochemically deposited on a glassy carbon electrode (GCE) to serve as a substrate to fabricate a label-free immunosensor for the detection of CA125. Among the four AuNPs@carbon composite, the AuNPs@MWCNTs-based sensor exhibited a high sensitivity of 0.001 µg/mL for the biomarker CA125 through the square wave voltammetry (SWV) technique. The high conductivity and surface area of MWCNTs supported the immobilization of AuNPs. Moreover, the carboxylic (COO-) functional groups in MWCNT improved to a higher quantity after the acid treatment, which served as an excellent support for the fabrication of electrochemical biosensors. The present method aims to explore an environmentally friendly synthesis of a layer-by-layer (LBL) assembly of AuNPs@carbon nanomaterials electrochemical immunoassay to CA125 in a clinical diagnosis at a low cost and proved feasible for point-of-care diagnosis.

Label-free optical and electrical immunoassays based on lyotropic chromonic liquid crystals: Implications of real-time detection and kinetic analysis.

Conventional liquid crystal (LC)-based biosensors utilize predominantly thermotropic LCs as the signal-transducing media, which are less environmentally sustainable compared with lyotropic counterparts. In this study, the nematic phase of the anionic azo dye sunset yellow (SSY), a type of lyotropic chromonic liquid crystals (LCLCs), was employed in the optical and electrical biosensing of bovine serum albumin (BSA) and the cancer biomarker CA125. The optical response observed under a polarizing optical microscope was quantified by image analysis, taking advantage of the specific absorption of SSY. The electrical response derived from the dielectric spectra of SSY provided a new alternative for quantitative bioassay based on nematic LCLCs. The limit of detection (LOD) of the optical and electrical protein assay was ∼10-11- and ∼10-10-g/ml BSA, respectively, whereas that of the optical and electrical immunoassay was 5.97 × 10-11 and 6.02 × 10-12 g/ml for CA125, respectively. Moreover, real-time monitoring and kinetic analysis, which are hardly achievable for the hydrophobic thermotropic LCs, were demonstrated by dispersing CA125 in nematic SSY and subsequently recording the optical response over time during the specific binding between CA125 and the immobilized anti-CA125 antibody. Results from this study further the potential of nematic LCLCs in biosensing, especially in dielectric and real-time detection.

ASu@MNPs-based electrochemical immunosensor for vitamin D3 serum samples analysis.

We report a new sensitive label-free electrochemical immunosensor to detect Vitamin D3 (25-OHD3) in untreated serum samples. To this aim, a graphite screen printed electrode (SPE) was modified using cysteamine (CYM) functionalized core-shell magnetic nanoparticles (Au@MNPs) then, the 25-OHD3 antibody (AbD) was immobilized via glutaraldehyde crosslinking. The several steps involved in the immunosensor development and 25-OHD3 analysis were monitored by using differential pulse voltammetry (DPV). The developed immunosensor showed a LOD of 2.4 ng mL-1 and a linear range between 7.4 and 70 ng mL-1. The effectiveness of the immunosensor in human serum analysis was assessed by comparing the results obtained with the chemiluminescence-immunoassay (CLIA) reference method. The high sensitivity and excellent agreement with the reference method suggest its potential use as a POCT to monitor hypovitaminosis 25-OHD levels.

Label-Free Immunosensor Based on Liquid Crystal and Gold Nanoparticles for Cardiac Troponin I Detection.

According to the World Health Organization (WHO), cardiovascular diseases (CVDs) are the leading cause of mortality and morbidity worldwide. The development of electrochemical biosensors for CVD markers detection, such as cardiac troponin I (cTnI), becomes an important diagnostic strategy. Thus, a glassy carbon electrode (GCE) was modified with columnar liquid crystal (LCcol) and gold nanoparticles stabilized in polyallylamine hydrochloride (AuNPs-PAH), and the surface was employed to evaluate the interaction of the cTnI antibody (anti-cTnI) and cTnI for detection in blood plasma. Morphological and electrochemical investigations were used in the characterization and optimization of the materials used in the construction of the immunosensor. The specific interaction of cTnI with the surface of the immunosensor containing anti-cTnI was monitored indirectly using a redox probe. The formation of the immunocomplex caused the suppression of the analytical signal, which was observed due to the insulating characteristics of the protein. The cTnI-immunosensor interaction showed linear responses from 0.01 to 0.3 ng mL-1 and a low limit of detection (LOD) of 0.005 ng mL-1 for linear sweep voltammetry (LSV) and 0.01 ng mL-1 for electrochemical impedance spectroscopy (EIS), showing good diagnostic capacity for point-of-care applications.

Electrochemical label-free immunoassay of HE4 using 3D PtNi nanocubes assemblies as biosensing interfaces.

Human epididymis protein 4 (HE4) is a vital biomarker for early diagnosis of epithelial ovarian cancer (EOC). Herein, a new label-free biosensor was developed using K3[Fe(CN)6] as the electrochemical probe for ultrasensitive immunoassay of HE4 based on PtNi nanocubes assemblies (NCAs) as efficient biosensing interfaces. The PtNi NCAs were synthesized by a simple solvothermal approach, where N-hexadecyltrimethylammonium chloride (HTAC) and 2,2'-bis(4,5-dimethylimidazole) (BDMM) behaved as co-structuring directors. Under the optimal conditions, the obtained HE4 immunosensor displayed a wide detection range from 0.001 to 100 ng mL-1 and a low detection limit (0.11 pg mL-1, S/N = 3). As a result, the current sensing platform would serve as a useful reference for detecting cancer biomarkers in the clinical assay and diagnosis.

Electrochemical immunoassay for detection of hepatitis C virus core antigen using electrode modified with Pt-decorated single-walled carbon nanotubes.

Pt nanoparticles deposited on single-walled carbon nanotubes (PtSWCNTs), synthesized via the deposition precipitation (DP) method, were introduced as a substrate for immobilizing antibodies on an electrode surface and then enhancing the electrochemical sensitivity. A PtSWCNT-modified paper-based screen-printed graphene electrode was successfully developed to diagnose hepatitis C virus (HCV) infection. The hepatitis C virus core antigen (HCV-cAg) level was determined by differential pulse voltammetry (DPV) using [Fe(CN)6]3-/4- as a redox solution. In the presence of HCV-cAg, the DPV current response decreased with increasing HCV-cAg concentration. Under the optimal conditions, the change in current response provides a good linear correlation with the logarithm of HCV-cAg concentration in the range 0.05 to 1000 pg mL-1 (RSD < 5%), and the limit of detection was 0.015 pg mL-1 (or 0.71 fmol L-1). Furthermore, the proposed immunosensor has been utilized to quantify HCV-cAg in human serum samples with reliable results compared with standard immunoassays (% relative error < 10%). This sensor offers a simple, sensitive, selective, disposable, and inexpensive means for determination of HCV-cAg in human serum samples. The paper-based label-free immunosensor is versatile and feasible for clinical diagnosis.

Ultrasensitive label-free electrochemical immunosensor of NT-proBNP biomarker based on branched AuPd nanocrystals/N-doped honeycombed porous carbon.

N-terminal pro-B-type natriuretic peptide is a major cardiac biomarker for early diagnosis and prognosis of heart failure. Herein, a novel label-free electrochemical immunosensor was developed based on home-made branched AuPd nanocrystals/N-doped porous carbon (AuPd NCS/NPC) for ultrasensitive and high-selective detection of N-terminal pro-B-type natriuretic peptide. Specifically, the AuPd NCS/NPC was prepared by a one-pot wet-chemical strategy by using thymine as a green structural directing agent, whose morphology, structures, and properties were strictly examined, showing high-efficiency catalysis towards electro-reduction of hydrogen peroxide. Under the optimized conditions, the fabricated sensor exhibited a dynamic linear range of 0.001 âˆ¼ 10 ng mL-1 and a low limit of detection (0.34 pg mL-1, S/N = 3) for immunoassay of N-terminal pro-B-type natriuretic peptide. Furthermore, this platform was explored for detection of the biomarker in human serum sample with satisfactory results. Thus, the built biosensor can render valuable guidance for prospective clinical diagnostic applications.

Ce-MOF/COF/carbon nanotube hybrid composite: Construction of efficient electrochemical immune platform for amplifying detection performance of CA125.

The combination of metal organic framework (MOF), covalent organic frameworks (COF) and carbon nanotube (CNT) forms a system due to their synergistic effect, thereby possessing the structural traits of individual components and exhibiting new properties. Herein, we successfully integrated terephthalonitrile-based-COF (TPN-COF)/CNT into the Ce-MOF, designed and synthesized Ce-MOF/TPN-COF/CNT hybrid material to construct a label-free immunosensor for specific detection of carcinomicantigen 125 (CA125). The synthesized composite exhibited abundant active sites and excellent electronic conductivity. As a result, more immunocomplex were immobilized to the carbon paste electrode (CPE) modified by Ce-MOF/TPN-COF/CNT owing to the hydrogen bonding and π-π interaction between triazine ring and trimesic acid ligand, leading to produce an amplified current response. The results of various instrument tests demonstrated that these structural advantages indeed contribute to the low detection limit of 0.000088 U/mL and wide linear range from 0.0001 U/mL to 100 U/mL for the CA125 immunosensor, which was superior to those of other proposed immunosensor. In addition, the constructed CA125 immunosensor exhibits good stability, repeatability, specificity, regeneration characteristics and acceptability in human serum. Therefore, MOF/COF/CNT composite holds promise as an electrode platform for building electrochemical immunosensors in the early diagnosis of cancer.

Recent Developments in the Field of Optical Immunosensors Focusing on a Label-Free, White Light Reflectance Spectroscopy-Based Immunosensing Platform.

Optical immunosensors represent a research field of continuously increasing interest due to their unique features, which can mainly be attributed to the high-affinity and specific antibodies they use as biorecognition elements, combined with the advantageous characteristics of the optical transducing systems these sensors employ. The present work describes new developments in the field, focusing on recent bioanalytical applications (2021-2022) of labeled and label-free optical immunosensors. Special attention is paid to a specific immunosensing platform based on White Light Reflectance Spectroscopy, in which our labs have gained specific expertise; this platform is presented in detail so as to include developments, improvements, and bioanalytical applications since the mid-2000s. Perspectives on the field are been briefly discussed as well, highlighting the potential of optical immunosensors to eventually reach the state of a reliable, highly versatile, and widely applicable analytical tool suitable for use at the Point-of-Care.

Cost-effective and disposable label-free voltammetric immunosensor for sensitive detection of interleukin-6.

IL-6 detection is highly desirable since can monitor many diseases in humans and assess the response to treatments. Herein, two novel label-free voltammetric immunosensors for rapid and accurate interleukin-6 (IL-6) detection in human serum are presented. The immunosensors are fabricated by immobilising two different IL-6 antibodies, identified as mAb-IL-6 clone-5 and clone-7, on in-house produced screen-printed electrodes modified with inexpensive recycling biochar (Bio-SPEs). To ensure high structural fidelity and performance, an in-depth electrochemical characterization of the layer-by-layer assembly of the immunosensor was conducted by cyclic voltammetry (CV) and sensing was performed using square wave voltammetry (SWV). The two immunosensors showed good analytical performances in human serum, exhibiting a wide linear range (LR) between 26-125 and 30-138 pg/mL, a good limit of detection (LOD) of 4.8 and 5.4 pg/mL and selectivity for IL-6 over other common cytokines, including IL-1ß and TNF-α. Performance comparison of IL-6 immunosensors with those of a commercial spectrophotometric ELISA kit (LOD of 20 pg/mL, RSD% of 15%) denotes a better sensitivity and reproducibility of the proposed label-free devices, associated with a reduced detection time (30 min instead of more than 3 h for ELISA test). Furthermore, the proposed immunosensors were successfully applied in blood samples (with only a dilution of 1:100 v/v in PBS and without additional treatments) with good sensitivity (LOD of 14.3 pg/mL) and reproducibility (RSD% < 11%), thus paving the way for their application as viable diagnostic and therapeutic point-of-care tools alternative to the IL-6 detection techniques routinely used (ELISA and Western Blot).

Label-free electrochemical biosensor for determination of procalcitonin based on graphene-wrapped Co nanoparticles encapsulated in carbon nanobrushes coupled with AuPtCu nanodendrites.

A new label-free electrochemical immunosensor was constructed for quantitative detection of procalcitonin (PCT), by employing AuPtCu nanodendrites (AuPtCu NDs, prepared by a one-pot solvothermal method) and graphene-wrapped Co nanoparticles encapsulated in 3D N-doped carbon nanobrushes (G-Co@ NCNBs), obtained by self-catalyzed chemical vapor deposition as immune-sensing platform. Impressively, the home-made nanocomposite enlarged the highly accessible active sites and promoted the mass/electron transport, in turn showing the efficient synergistic catalysis towards H2O2 reduction, combined by greatly increasing the loading capacity of the PCT antibody (Ab). The as-constructed sensor displayed a dynamic linear range of 0.0001 ~ 100 ng mL-1 along with an ultra-low limit of detection (LOD = 0.011 pg mL-1, S/N = 3) and was further explored for determination of PCT in a diluted serum sample with acceptable results. The sensor provides some valuable guidelines for bioassay and early diagnosis of sepsis.

A sensitive electrochemical immunosensing interface for label-free detection of aflatoxin B1 by attachment of nanobody to MWCNTs-COOH@black phosphorene.

A label-free electrochemical immunosensor has advantages of real-time and rapid detection, but it is weak in detection of small molecular toxins such as aflatoxin B1 (AFB1). The greatest obstacle to achieving this is that small molecules bound to a common immunosensing interface cannot interfere with electron transfer effectively and the detection signal is so weak. Therefore, a sensitive electrochemical immunosensing interface for small molecules is urgently needed. Here, we employed functionalized black phosphorene (BP) as electrode modification materials and anti-AFB1 nanobody (Nb) as a biorecognition element to construct a very sensitive immunosensing interface towards small molecular AFB1. The BP functionalized by carboxylic multi-walled carbon nanotubes (MWCNTs-COOH) via P-C bonding behaved with a satisfactory stability and good catalytic performance for the ferricyanide/ferrocyanide probe, while the small-sized Nb showed good compatibility with the functionalized BP and also had less influence on electron transfer than monoclonal antibody (mAb). Expectedly, the as-prepared immunosensing interface was very sensitive to AFB1 detection by differential pulse voltammetry (DPV) in a redox probe system. Under optimized conditions, a linear range from 1.0 pM to 5.0 nM and an ultralow detection limit of 0.27 pM were obtained. Additionally, the fabricated immunosensor exhibited satisfactory stability, specificity, and reproducibility. The strategy proposed here provides a more reliable reference for label-free sensing of small molecules in food samples.