pO2 reporter composite hydrogel macroencapsulation devices for magnetic resonance imaging oxygen quantification.

Hydrogel cell encapsulation devices are a common approach to reduce the need for chronic systemic immunosuppression in allogeneic cell product transplantation. Macroencapsulation approaches are an appealing strategy, as they maximize graft retrievability and cell dosage within a single device; however, macroencapsulation devices face oxygen transport challenges as geometries increase from preclinical to clinical scales. Device design guided by computational approaches can facilitate graft oxygen availability to encapsulated cells in vivo but is limited without accurate measurement of oxygen levels within the transplant site and graft. In this study, we engineer pO2 reporter composite hydrogels (PORCH) to enable spatiotemporal measurement of oxygen tension within macroencapsulation devices using the proton Imaging of siloxanes to map tissue oxygenation levels (PISTOL) magnetic resonance imaging approach. We engineer two methods of incorporating siloxane oximetry reporters within hydrogel devices, an emulsion and microbead-based approach, and evaluate PORCH cytotoxicity on co-encapsulated cells and accuracy in quantifying oxygen tension in vitro. We find that both emulsion and microbead PORCH approaches enable accurate in situ oxygen quantification using PISTOL magnetic resonance oximetry, and that the emulsion-based PORCH approach results in higher spatial resolution.

Waffle-inspired hydrogel-based macrodevice for spatially controlled distribution of encapsulated therapeutic microtissues and pro-angiogenic endothelial cells.

Macro-encapsulation systems for delivery of cellular therapeutics in diabetes treatment offer major advantages such as device retrievability and high cell packing density. However, microtissue aggregation and absence of vasculature have been implicated in the inadequate transfer of nutrients and oxygen to the transplanted cellular grafts. Herein, we develop a hydrogel-based macrodevice to encapsulate therapeutic microtissues positioned in homogeneous spatial distribution to mitigate their aggregation while concurrently supporting an organized intra-device network of vascular-inductive cells. Termed Waffle-inspired Interlocking Macro-encapsulation (WIM) device, this platform comprises two modules with complementary topography features that fit together in a lock-and-key configuration. The waffle-inspired grid-like micropattern of the "lock" component effectively entraps insulin-secreting microtissues in controlled locations while the interlocking design places them in a co-planar spatial arrangement with close proximity to vascular-inductive cells. The WIM device co-laden with INS-1E microtissues and human umbilical vascular endothelial cells (HUVECs) maintains desirable cellular viability in vitro with the encapsulated microtissues retaining their glucose-responsive insulin secretion while embedded HUVECs express pro-angiogenic markers. Furthermore, a subcutaneously implanted alginate-coated WIM device encapsulating primary rat islets achieves blood glucose control for 2 weeks in chemically induced diabetic mice. Overall, this macrodevice design lays foundation for a cell delivery platform, which has the potential to facilitate nutrients and oxygen transport to therapeutic grafts and thereby might lead to improved disease management outcome.

An electrospun macrodevice for durable encapsulation of human cells with consistent secretion of therapeutic antibodies.

Frequent subcutaneous or intravenous administrations of therapeutic biomolecules can be costly and inconvenient for patients. Implantation of encapsulated recombinant cells represents a promising approach for the sustained delivery of biotherapeutics. However, foreign body and fibrotic response against encapsulation materials results in drastically reduced viability of encapsulated cells, presenting a major engineering challenge for biocompatibility. Here, we show that the multi-laminate electrospun retrievable macrodevice (Bio-Spun) protects genetically modified human cells after subcutaneous implant in mice. We describe here a biocompatible nanofiber device that limits fibrosis and extends implant survival. For more than 150 days, these devices supported human cells engineered to secrete the antibodies: vedolizumab, ustekinumab, and adalimumab, while eliciting minimal fibrotic response in mice. The porous electrospun cell chamber allowed secretion of the recombinant antibodies into the host bloodstream, and prevented infiltration of host cells into the chamber. High plasma levels (>50 µg/mL) of antibody were maintained in the optimized devices for more than 5 months. Our findings demonstrate that macrodevices constructed from electrospun materials are effective in protecting genetically engineered cells for the sustained administration of recombinant therapeutic antibodies.

3D-printed polyurethane immunoisolation bags with controlled pore architecture for macroencapsulation of islet clusters encapsulated in alginate gel.

Diabetes mellitus is a fast-growing chronic metabolic condition caused by insulin deficiency or resistance, leading to lifelong insulin use. It has become one of the world's most difficult non-communicable diseases. The goal of this study was to view the effectiveness of the combined method of macro- and microencapsulation for islet transplantation. The process of 3D printing is used to make macroencapsulation bags with regulated diffusion properties thanks to the emerging small pored channels. The ink used to manufacture 3D-printed bags with controlled specifications was polyurethane solution (13% w/v). Swelling experiments revealed that there was very little swelling and that the membrane maintained its structural stability. Alginate beads (made from 5% w/v solution) were used to microencapsulate islet cell clusters. Direct contact assay was used to confirm in vitro cytocompatibility. The insulin release from the encapsulated rabbit islets was confirmed using a glucose challenge assay. When challenged with 20 mM glucose on day 7, the encapsulated islet cells released insulin at a rate of 9.72 ± 0.65 mU/L, which was identical to the RIN-5F islet cell line control, confirming the functioning of the encapsulated islets. After 21 days of culture, the islets were shown to be viable utilizing a live-dead assay. As a result, our work demonstrates that 3D printing for macroencapsulating cells, as well as microencapsulation with alginates, is a viable scale-up technology with great potential in the field of pancreatic islet transplantation.

Towards a Whole Sample Imaging Approach Using Diffusion Tensor Imaging to Examine the Foreign Body Response to Explanted Medical Devices.

Analysing the composition and organisation of the fibrous capsule formed as a result of the Foreign Body Response (FBR) to medical devices, is imperative for medical device improvement and biocompatibility. Typically, analysis is performed using histological techniques which often involve random sampling strategies. This method is excellent for acquiring representative values but can miss the unique spatial distribution of features in 3D, especially when analysing devices used in large animal studies. To overcome this limitation, we demonstrate a non-destructive method for high-resolution large sample imaging of the fibrous capsule surrounding human-sized implanted devices using diffusion tensor imaging (DTI). In this study we analyse the fibrous capsule surrounding two unique macroencapsulation devices that have been implanted in a porcine model for 21 days. DTI is used for 3D visualisation of the microstructural organisation and validated using the standard means of fibrous capsule investigation; histological analysis and qualitative micro computed tomography (microCT) and scanning electron microscopy (SEM) imaging. DTI demonstrated the ability to distinguish microstructural differences in the fibrous capsules surrounding two macroencapsulation devices made from different materials and with different surface topographies. DTI-derived metrics yielded insight into the microstructural organisation of both capsules which was corroborated by microCT, SEM and histology. The non-invasive characterisation of the integration of implants in the body has the potential to positively influence analysis methods in pre-clinical studies and accelerate the clinical translation of novel implantable devices.

Immortalized human myoblast cell lines for the delivery of therapeutic proteins using encapsulated cell technology.

Despite many promising results obtained in previous preclinical studies, the clinical development of encapsulated cell technology (ECT) for the delivery of therapeutic proteins from macrocapsules is still limited, mainly due to the lack of an allogeneic cell line compatible with therapeutic application in humans. In our work, we generated an immortalized human myoblast cell line specifically tailored for macroencapsulation. In the present report, we characterized the immortalized myoblasts and described the engineering process required for the delivery of functional therapeutic proteins including a cytokine, monoclonal antibodies and a viral antigen. We observed that, when encapsulated, the novel myoblast cell line can be efficiently frozen, stored, and thawed, which limits the challenge imposed by the manufacture and supply of encapsulated cell-based therapeutic products. Our results suggest that this versatile allogeneic cell line represents the next step toward a broader development and therapeutic use of ECT.

Localization of drug biodistribution in a 3D-bioengineered subcutaneous neovascularized microenvironment.

Local immunomodulation has shown the potential to control the immune response in a site-specific manner for wound healing, cancer, allergy, and cell transplantation, thus abrogating adverse effects associated with systemic administration of immunotherapeutics. Localized immunomodulation requires confining the biodistribution of immunotherapeutics on-site for maximal immune control and minimal systemic drug exposure. To this end, we developed a 3D-printed subcutaneous implant termed 'NICHE', consisting of a bioengineered vascularized microenvironment enabled by sustained drug delivery on-site. The NICHE was designed as a platform technology for investigating local immunomodulation in the context of cell therapeutics and cancer vaccines. Here we studied the ability of the NICHE to localize the PK and biodistribution of different model immunomodulatory agents in vivo. For this, we first performed a mechanistic evaluation of the microenvironment generated within and surrounding the NICHE, with emphasis on the parameters related to molecular transport. Second, we longitudinally studied the biodistribution of ovalbumin, cytotoxic T lymphocyte-associated antigen-4-Ig (CTLA4Ig), and IgG delivered locally via NICHE over 30 days. Third, we used our findings to develop a physiologically-based pharmacokinetic (PBPK) model. Despite dense and mature vascularization within and surrounding the NICHE, we showed sustained orders of magnitude higher molecular drug concentrations within its microenvironment as compared to systemic circulation and major organs. Further, the PBPK model was able to recapitulate the biodistribution of the 3 molecules with high accuracy (r â€‹> â€‹0.98). Overall, the NICHE and the PBPK model represent an adaptable platform for the investigation of local immunomodulation strategies for a wide range of biomedical applications.

Parathyroid Allotransplantation: A Systematic Review.

Background: To date, there is no satisfactory treatment for patients with calcium and vitamin D supplementation refractive hypoparathyroidism. Parathyroid allotransplantation by design is a one-time cure through its restoration of the parathyroid function and, therefore, could be the solution. A systematic literature review is conducted in the present paper, with the aim of outlining the possibilities of parathyroid allotransplantation and to calculate its efficacy. Additionally, various transplantation characteristics are linked to success. Methods: This review is carried out according to the PRISMA statement and checklist. Relevant articles were searched for in medical databases with the most recent literature search performed on 9 December 2021. Results: In total, 24 articles involving 22 unique patient cohorts were identified with 203 transplantations performed on 148 patients. Numerous types of (exploratory) interventions were carried out with virtually no protocols that were alike: there was the use of (non-) cryopreserved parathyroid tissue combined with direct transplantation or pretreatment using in vitro techniques, such as culturing cells and macro-/microencapsulation. The variability increased further when considering immunosuppression, graft histology, and donor-recipient compatibility, but this was found to be reported in its entirety by exception. As a result of the large heterogeneity among studies, we constructed our own criterium for transplantation success. With only the studies eligible for our assessment, the pooled success rate for parathyroid allotransplantation emerged to be 46% (13/28 transplantations) with a median follow-up duration of 12 months (Q1-Q3: 8-24 months). Conclusions: Manifold possibilities have been explored around parathyroid allotransplantation but are presented as a double-edged sword due to high clinical diverseness, low expertise in carrying out the procedure, and unsatisfactory study quality. Transplantations carried out with permanent immunosuppression seem to be the most promising, but, in its current state, little could be said about the treatment efficacy with a high quality of evidence. Of foremost importance in pursuing the answer whether parathyroid allotransplantation is a suitable treatment for hypoparathyroidism, a standardized definition of transplantation success must be established with a high-quality trial.

A tailored permeable reactive bio-barrier for in situ groundwater remediation: removal of 3-chlorophenol as a case study.

The present study explored bacterial aerobic biodegradation of reduced carbon-contaminants (RCC) in a pilot system mimicking remediation of a saturated aquifer in a permeable reactive biobarrier (PRBB). Bioaugmentation was performed with a pure culture of Pseudomonas putida macro-encapsulated in a cellulose-acetate porous envelope and integrated transversely to the flow trajectory of the fluid in the biobarrier and compared with controls without capsules. The macro-encapsulation technique applied allowed the incorporation of a built-in nutrient core for the slow release of macronutrients, i.e. N, P, instead of exogenous nutrients supply. 3-Chlorophenol (3CP) at a concentration range of 350-500 mg/L was chosen as an RCC model compound. The findings indicate efficient 3CP biodegradation during the PRBB operation with a similar degree of transformation (76 ± 2% and 72 ± 2%) and mineralization (55 ± 4% vs. 49 ± 3%) for exogenous and built-in nutrients supply, respectively. The extent of dechlorination in both cases (54 ± 10% vs. 40 ± 2%, respectively) followed mineralization rather than transformation, suggesting that Cl- release took place in late transformation stages. Negligible decontamination was observed in the control system without bioaugmentation. Concluding, tailored PRBB with macro-capsules incorporating a built-in nutrient core to support bacterial growth presents a significant environmental advantage controlling excess nutrients release required in bioremediation of oligotrophic systems.

Emerging strategies for beta cell transplantation to treat diabetes.

Beta cell replacement has emerged as an attractive therapeutic alternative to traditional exogenous insulin administration for management of type 1 diabetes (T1D). Beta cells deliver insulin dynamically based on individual glycometabolic requirements, providing glycemic control while significantly reducing patient burden. Although transplantation into the portal circulation is clinically available, poor engraftment, low cell survival, and immune rejection have sparked investigation of alternative strategies for beta cell transplantation. In this review, we focus on current micro- and macroencapsulation technologies for beta cell transplantation and evaluate their advantages and challenges. Specifically, we comment on recent methods to ameliorate graft hypoxia including enhanced vascularization, reduction of pericapsular fibrotic overgrowth (PFO), and oxygen supplementation. We also discuss emerging beta cell-sourcing strategies to overcome donor shortage and provide insight into potential approaches to address outstanding challenges in the field.

Genetically Modified Cell Transplantation Through Macroencapsulated Spheroids with Scaffolds to Treat Fabry Disease.

Cell transplantation is expected to be another strategy to treat lysosomal diseases, having several advantages compared to enzyme replacement therapy, such as continuous enzyme secretion and one-time treatment to cure diseases. However, cell transplantation for lysosomal diseases holds issues to be resolved for the clinical field. In this study, we developed a new ex vivo gene therapy platform using a transplant pack, which consists of a porous membrane made of ethylene-vinyl alcohol in the pack-type and spheroids with scaffolds. These membranes have countless pores of less than 0.1 µm2 capable of secreting proteins, including alpha-galactosidase enzyme, and segregating the contents from the host immune system. When the packs were subcutaneously transplanted into the backs of green fluorescent protein (GFP) mice, no GFP-positive cells migrated to the transplanted pack in either autogenic or allogenic mice. The transplanted cells in the pack survived for 28 days after transplantation. When cells overexpressing alpha-galactosidase were used as donor cells for the packs and implanted into Fabry disease model mice, the accumulation of the alpha-galactosidase enzyme was also observed in the livers. In this study, we reported a new ex vivo therapeutic strategy combining macroencapsulation and cellular spheroids with scaffolds. This pack, macroencapsulated spheroids with scaffolds, can also be applied to other types of lysosomal diseases by modifying genes of interest.

Developing a morphomics framework to optimize implant site-specific design parameters for islet macroencapsulation devices.

Delivering a clinically impactful cell number is a major design challenge for cell macroencapsulation devices for Type 1 diabetes. It is important to understand the transplant site anatomy to design a device that is practical and that can achieve a sufficient cell dose. We identify the posterior rectus sheath plane as a potential implant site as it is easily accessible, can facilitate longitudinal monitoring of transplants, and can provide nutritive support for cell survival. We have investigated this space using morphomics across a representative patient cohort (642 participants) and have analysed the data in terms of gender, age and BMI. We used a shape optimization process to maximize the volume and identified that elliptical devices achieve a clinically impactful cell dose while meeting device manufacture and delivery requirements. This morphomics framework has the potential to significantly influence the design of future macroencapsulation devices to better suit the needs of patients.

A therapeutic convection-enhanced macroencapsulation device for enhancing ß cell viability and insulin secretion.

Islet transplantation for type 1 diabetes treatment has been limited by the need for lifelong immunosuppression regimens. This challenge has prompted the development of macroencapsulation devices (MEDs) to immunoprotect the transplanted islets. While promising, conventional MEDs are faced with insufficient transport of oxygen, glucose, and insulin because of the reliance on passive diffusion. Hence, these devices are constrained to two-dimensional, wafer-like geometries with limited loading capacity to maintain cells within a distance of passive diffusion. We hypothesized that convective nutrient transport could extend the loading capacity while also promoting cell viability, rapid glucose equilibration, and the physiological levels of insulin secretion. Here, we showed that convective transport improves nutrient delivery throughout the device and affords a three-dimensional capsule geometry that encapsulates 9.7-fold-more cells than conventional MEDs. Transplantation of a convection-enhanced MED (ceMED) containing insulin-secreting ß cells into immunocompetent, hyperglycemic rats demonstrated a rapid, vascular-independent, and glucose-stimulated insulin response, resulting in early amelioration of hyperglycemia, improved glucose tolerance, and reduced fibrosis. Finally, to address potential translational barriers, we outlined future steps necessary to optimize the ceMED design for long-term efficacy and clinical utility.

Study on the Frost Resistance of Concrete Modified with Steel Balls Containing Phase Change Material (PCM).

In order to investigate the effect of phase change materials on the frost resistance of concrete in cold regions, hollow steel balls were used in this paper for the macroscopic encapsulation of the phase change material to replace some of the coarse aggregates in the preparation of phase change concrete. On the premise of ensuring reasonable mechanical properties, concrete mixed with different contents and different surface treatments of grouting steel balls were tested for the compressive strength and splitting tensile strength to determine the optimum content of phase change steel balls and investigate the frost resistance of phase change concrete. At the same time, industrial CT was used to explore the internal pore evolution pattern of concrete during the freeze-thaw period. The test results show that the optimum content of steel balls is 75%; during the freeze-thaw process, the mass loss, relative dynamic elastic modulus loss, and strength loss of phase change concrete are all lower than those of ordinary concrete, and the increase in porosity of phase change concrete is also significantly lower than that of ordinary concrete; the addition of phase change materials can optimise the distribution of the internal pore in concrete, improve its internal pore structure, and enhance its frost resistance.

Design Considerations for Macroencapsulation Devices for Stem Cell Derived Islets for the Treatment of Type 1 Diabetes.

Stem cell derived insulin producing cells or islets have shown promise in reversing Type 1 Diabetes (T1D), yet successful transplantation currently necessitates long-term modulation with immunosuppressant drugs. An alternative approach to avoiding this immune response is to utilize an islet macroencapsulation device, where islets are incorporated into a selectively permeable membrane that can protect the transplanted cells from acute host response, whilst enabling delivery of insulin. These macroencapsulation systems have to meet a number of stringent and challenging design criteria in order to achieve the ultimate goal of reversing T1D. In this progress report, the design considerations and functional requirements of macroencapsulation systems are reviewed, specifically for stem-cell derived islets (SC-islets), highlighting distinct design parameters. Additionally, a perspective on the future for macroencapsulation systems is given, and how incorporating continuous sensing and closed-loop feedback can be transformative in advancing toward an autonomous biohybrid artificial pancreas.

In vivovascularization and islet function in a microwell device for pancreatic islet transplantation.

Islet encapsulation in membrane-based devices could allow for transplantation of donor islet tissue in the absence of immunosuppression. To achieve long-term survival of islets, the device should allow rapid exchange of essential nutrients and be vascularized to guarantee continued support of islet function. Recently, we have proposed a membrane-based macroencapsulation device consisting of a microwell membrane for islet separation covered by a micropatterned membrane lid. The device can prevent islet aggregation and support functional islet survivalin vitro. Here, based on previous modeling studies, we develop an improved device with smaller microwell dimensions, decreased spacing between the microwells and reduced membrane thickness and investigate its performancein vitroandin vivo. This improved device allows for encapsulating higher islet numbers without islet aggregation and by applying anin vivoimaging system we demonstrate very good perfusion of the device when implanted intraperitoneally in mice. Besides, when it is implanted subcutaneously in mice, islet viability is maintained and a vascular network in close proximity to the device is developed. All these important findings demonstrate the potential of this device for islet transplantation.

Macro-encapsulation of mesenchymal stem cells in acute and chronic liver injury animal models.

BACKGROUND AND AIM: Stem cell treatments using scaffolds for liver disease have been well studied. However, macro-encapsulation of mesenchymal stem cells (MSCs) to minimize or inhibit stem cell homing has not been evaluated. Here, we conducted a proof-of-concept study using MSCs macro-encapsulated in poly lactic-co-glycolic acid in liver disease models. METHODS: Poly lactic-co-glycolic acid semipermeable membranes (surface pore size up to 40 µm) were used as the macro-encapsulation system. Macro-encapsulated pouches were loaded with MSCs and sealed. Each pouch was implanted in the subcutaneous region of the dorsum or interlobular space of the liver. Acute liver injury was induced using thioacetamide intraperitoneal injection thrice a week. For the chronic liver fibrosis model, thioacetamide dose was gradually increased, starting from 100 to 400 mg/kg over 16 weeks (thrice a week). RESULTS: In the acute liver injury model, the treated groups showed decreased liver inflammation and necrosis compared with the control. Hepatic fibrosis decreased in the treated group in the chronic liver fibrosis model compared with that in the control group. Encapsulated MSCs exhibited changed cell morphology and characteristics after implantation, showing increased periodic acid-Schiff staining and CYP2E1 expression. Migration and homing of MSCs into the liver was not observed. Under hypoxic conditions, macro-encapsulated MSCs secreted more growth hormones, including vascular endothelial growth factor, platelet-derived growth factor, angiopoietin-2, and placental growth factor, than monolayered MSCs in vitro. CONCLUSIONS: Macro-encapsulated MSCs attenuate hepatic inflammation and fibrosis by upregulating hypoxia-induced growth hormone secretion in liver disease models.

High density culture of pancreatic islet-like 3D tissue organized in oxygen-permeable porous scaffolds with external oxygen supply.

Transplantation of macroencapsulated pancreatic islets within semipermeable membranes is a promising approach for the treatment of type 1 diabetes. Encapsulation beneficially isolates the implants from the host immune system. Deleteriously however, it also limits oxygen supply to the cells. This creates challenges in loading islets at the amount and density required to meet the practical demands of clinical usage. To overcome this challenge, we investigated the feasibility of using macroporous scaffolds made of an oxygen-permeable polymer, poly(dimethylsiloxane) (PDMS) by culturing pancreatic islet-like three-dimensional tissue made of a rat pancreatic beta cell line on the scaffolds. With external oxygenation, the density and function of cells on the PDMS scaffold were more than three times and almost two times higher than those without oxygenation, respectively. This suggests that the oxygenation afforded by the PDMS scaffolds allows for high-density loading of islet tissue into the devices.

Engineering Strategies to Improve Islet Transplantation for Type 1 Diabetes Therapy.

Type 1 diabetes is an autoimmune disease in which the immune system attacks insulin-producing beta cells of pancreatic islets. Type 1 diabetes can be treated with islet transplantation; however, patients must be administered immunosuppressants to prevent immune rejection of the transplanted islets if they are not autologous or not engineered with immune protection/isolation. To overcome biological barriers of islet transplantation, encapsulation strategies have been developed and robustly investigated. While islet encapsulation can prevent the need for immunosuppressants, these approaches have not shown much success in clinical trials due to a lack of long-term insulin production. Multiple engineering strategies have been used to improve encapsulation and post-transplantation islet survival. In addition, more efficient islet cryopreservation methods have been designed to facilitate the scaling-up of islet transplantation. Other islet sources have been identified including porcine islets and stem cell-derived islet-like aggregates. Overall, islet-laden capsule transplantation has greatly improved over the past 30 years and is moving towards becoming a clinically feasible treatment for type 1 diabetes.

A High Cell-Bearing Capacity Multibore Hollow Fiber Device for Macroencapsulation of Islets of Langerhans.

Macroencapsulation of islets of Langerhans is a promising strategy for transplantation of insulin-producing cells in the absence of immunosuppression to treat type 1 diabetes. Hollow fiber membranes are of interest there because they offer a large surface-to-volume ratio and can potentially be retrieved or refilled. However, current available fibers have limitations in exchange of nutrients, oxygen, and delivery of insulin potentially impacting graft survival. Here, multibore hollow fibers for islets encapsulation are designed and tested. They consist of seven bores and are prepared using nondegradable polymers with high mechanical stability and low cell adhesion properties. Human islets encapsulated there have a glucose induced insulin response (GIIS) similar to nonencapsulated islets. During 7 d of cell culture in vitro, the GIIS increases with graded doses of islets demonstrating the suitability of the microenvironment for islet survival. Moreover, first implantation studies in mice demonstrate device material biocompatibility with minimal tissue responses. Besides, formation of new blood vessels close to the implanted device is observed, an important requirement for maintaining islet viability and fast exchange of glucose and insulin. The results indicate that the developed fibers have high islet bearing capacity and can potentially be applied for a clinically applicable bioartificial pancreas.