Uniform Polymer Microspheres by Photoinduced Metal-Free Atom Transfer Radical Precipitation Polymerization.

Herein, a photoinduced method is introduced for the synthesis of highly cross-linked and uniform polymer microspheres by atom transfer radical polymerization (ATRP) at room temperature and in the absence of stabilizers or surfactants. Uniform particles are obtained at monomer concentrations as high as 10% (by volume), with polymers being exempt from contamination by residual transition metal catalysts, thereby overcoming the two major longstanding problems associated with thermally initiated ATRP-mediated precipitation polymerization. Moreover, the obtained particles have also immobilized ATRP initiators on their surface, which directly enables the controlled growth of densely grafted polymer layers with adjustable thickness and a well-defined chemical composition. The method is then employed successfully for the synthesis of molecularly imprinted polymer microspheres.

Se-functionalized metal-free catalysts rich in sp3-hybridized carbon enable efficient oxygen electroreduction.

Carbon-based metal-free materials are emerging as leading candidates to replace noble-metal catalysts in the oxygen reduction reaction (ORR). Herein, we introduce a facile secondary carbonation technique for fabricating Se and N co-doped metal-free catalysts using a zeolite imidazole framework (ZIF-8) as the precursor. The optimal electrocatalyst, designated SeNC-900, exhibited good ORR performance under both alkaline and acidic conditions, with half-wave potentials of 0.864 V and 0.731 V (vs. RHE), respectively. Density functional theory (DFT) calculations reveal that the enhanced activity of SeNC-900 originates from Se doping, which triggers an increase in the intrinsic defects of sp3-hybridized C. Concurrently, the sp3-hybridized C, in concert with Se dopant, modulates the electronic structure of the active C atoms. This work not only underscores the significance of tuning the electronic structure to boost catalytic performance by enriching intrinsic defects but also presents a fresh insight into the effect of heteroatom doping on carbon-based materials for electrocatalysis.

Surface Optimization of Noble-Metal-Free Conductive [Mn1/4Co1/2Ni1/4]O2 Nanosheets for Boosting Their Efficacy as Hybridization Matrices.

Conductive 2D nanosheets have evoked tremendous scientific efforts because of their high efficiency as hybridization matrices for improving diverse functionalities of nanostructured materials. To address the problems posed by previously reported conductive nanosheets like poorly-interacting graphene and cost-ineffective RuO2 nanosheets, economically feasible noble-metal-free conductive [MnxCo1-2xNix]O2 oxide nanosheets are synthesized with outstanding interfacial interaction capability. The surface-optimized [Mn1/4Co1/2Ni1/4]O2 nanosheets outperformed RuO2/graphene nanosheets as hybridization matrices in exploring high-performance visible-light-active (λ >420 nm) photocatalysts. The most efficient g-C3N4-[Mn1/4Co1/2Ni1/4]O2 nanohybrid exhibited unusually high photocatalytic activity (NH4 + formation rate: 1.2 mmol g-1 h-1), i.e., one of the highest N2 reduction efficiencies. The outstanding hybridization effect of the defective [Mn1/4Co1/2Ni1/4]O2 nanosheets is attributed to the optimization of surface bonding character and electronic structure, allowing for improved interfacial coordination bonding with g-C3N4 at the defect sites. Results from spectroscopic measurements and theoretical calculations reveal that hybridization helps optimize the bandgap energy, and improves charge separation, N2 adsorptivity, and surface reactivity. The universality of the [Mn1/4Co1/2Ni1/4]O2 nanosheet as versatile hybridization matrices is corroborated by the improvement in the electrocatalytic activity of hybridized Co-Fe-LDH as well as the photocatalytic hydrogen production ability of hybridized CdS.

Bis(2-butoxyethyl) Ether-Promoted O2-Mediated Oxidation of Alkyl Aromatics to Ketones under Clean Conditions.

Conventional oxidation processes for alkyl aromatics to ketones employ oxidants that tend to generate harmful byproducts and cause severe equipment corrosion, ultimately creating critical environmental problems. Thus, in this study, a practical, efficient, and green method was developed for the synthesis of aromatic ketones by applying a bis(2-butoxyethyl) ether/O2 system under external catalyst-, additive-, and base-free conditions. This O2-mediated oxidation system can tolerate various functional groups and is suitable for large-scale synthesis. Diverse target ketones were prepared under clean conditions in moderate-to-high yields. The late-stage functionalization of drug derivatives with the corresponding ketones and one-pot sequential chemical conversions to ketone downstream products further broaden the application prospects of this approach.

Transition-metal-free synthesis of arylboronates via thermal generation of aryl radicals from triarylbismuthines in air.

A simple and versatile synthesis of arylboronates has been achieved by using triarylbismuthines as aryl radical sources under transition-metal-free and open-air conditions. Conventional methods required photoirradiation or electrolysis to generate aryl radicals from triarylbismuthines. In this study, it was found that simply heating the solution of triarylbismuthines in benzotrifluoride (BTF) in air successfully led to the generation of aryl radicals, and the subsequent reaction with bis(pinacolato)diboron afforded a variety of arylboronates in moderate to good yields.

C3N4/Se-CNTs as Advanced Metal-Free Catalysts for the Photoassisted Electrocatalytic Oxygen Evolution Reaction.

Photoassisted electrocatalysis is a frontier direction of electrocatalysis for promoting energy conversion. In this work, a metal-free C3N4/Se-CNTs is reported as a novel catalyst for photoassisted electrocatalytic oxygen evolution reaction (OER). C3N4 has an appropriate bandgap, high specific surface area, and long-term stability. CNTs can modulate the electronic environment of C3N4 by strong π-π interaction and greatly enhance the separation efficiency of photogenerated carriers. The distributed Se nanoparticles in CNTs can further increase the charge transfer ability. As a metal-free catalyst, the C3N4/Se-CNTs exhibits an overpotential of 231 mV at a current density of 10 mA cm-2 and a small Tafel slope of 52 mV dec-1 under illumination, which ranks among the best catalysts for photoassisted OER performance, surpassing most noble and transition metal-based catalysts. The result demonstrates the great potential of C3N4-based catalysts in the photoassisted OER process and provides a new perspective to explore the excellent metal-free OER catalysts.

Petroleum Pitch-Derived Porous Carbon Materials as Metal-Free Catalyst for Dry Reforming of Methane.

Porous carbon materials have gained increasing attention in catalysis applications due to their tailorable surface properties, large specific surface area, excellent thermal stability, and low cost. Even though porous carbon materials have been employed for thermal-catalytic dry reforming of methane (DRM), the structure-function relationship, especially the critical factor affecting catalytic performance, is still under debate. Herein, various porous carbon-based samples with disparate pore structures and surface properties are prepared by alkali (K2CO3) etching and the following CO2 activation of low-cost petroleum pitch. Detailed characterization clarifies that the quinone/ketone carbonyl functional groups on the carbon surface are the key active sites for DRM. Density functional theory (DFT) calculations also show that the C=O group have the lowest transition state energy barrier for CH4* cleavage to CH3* (2.15 eV). Furthermore, the cooperative interplay between the specific surface area and quinone/ketone carbonyl is essential to boost the cleavage of C-H and C-O bonds, guaranteeing enhanced DRM catalytic performance. The MC-600-800 catalyst exhibited an initial CH4 conversion of 51% and a reaction rate of 12.6 mmolCH4 gcat.-1 h-1 at 800 °C, CH4:CO2:N2= 1:1:8, and GHSV = 6000 mL gcat.-1 h-1. Our work could pave the way for the rational design of metal-free carbon-based DRM catalysts and shed new light on the high value-added utilization of heavy oils.

Unveiling the Significance of tert-Butoxides in Transition Metal-Free Cross-Coupling Reactions.

The astounding reactivity of tert-butoxides in transition metal-free coupling reactions is driving the scientific community towards a new era of environmental friendly, as well as cost-effective, transformation strategies. Transition metal-catalyzed coupling reactions generate hazardous wastes and require harsh reaction conditions, mostly at elevated temperature, which increases not only costs but also environmental concerns regarding the methodology. Tert-butoxide-catalyzed/mediated coupling reactions have several advantages and potential applications. They can form carbon-carbon, carbon-heteroatom, and heteroatom-heteroatom bonds under mild reaction conditions. Mechanistic insights into these reactions include both ionic and radical pathways, with the fate of the intermediates depending on the reaction conditions and/or additives used in the reactions. Among all of the known tert-butoxides, potassium tert-butoxide has pronounced applications in transition metal-free coupling reactions as compared to other tert-butoxides, such as sodium and lithium tert-butoxides, because of the higher electropositivity of potassium compared to sodium and lithium. Moreover, potassium tert-butoxide can act as a source of base, nucleophile and single electron donors in various important transformations. In this review, we provide an extensive overview and complete compilation of transition metal-free cross-coupling reactions catalyzed/promoted by tert-butoxides during the past 10 years.

Modulating Core Polarity in Metal-free Covalent Organic Frameworks for Selective Electrocatalytic Hydrogen Peroxide Production.

Tuning the charge density at the active site to balance the adsorption ability and reactivity of oxygen is extremely significant for driving a two-electron oxygen reduction reaction (ORR) to produce hydrogen peroxide (H2O2). Herein, we have highlighted the influence of intermolecular polarity in covalent organic frameworks (COFs) on the efficiency and selectivity of electrochemical H2O2 production. Different C3 symmetric building blocks have been utilized to regulate the charge density at the active sites. The benzene-cored COF, which exhibits reduced polarity than the triazine-cored COF, displayed enhanced performance in H2O2 production, achieving 93.1% selectivity for H2O2 at 0.4 V with almost two-electron transfer and a faradaic efficiency of 90.5%. In-situ electrochemical Raman spectroscopy and scanning electrochemical microscopy (SECM) were employed to confirm H2O2 generation and analyze spatial reactivity patterns. These techniques provided detailed insights into localized catalytic behavior, emphasizing the influence of core polarity.

Tuning the Active Oxygen Species of Two-Dimensional Borophene Oxide toward Advanced Metal-Free Catalysis.

Two-dimensional (2D) borophene materials are predicted to be ideal catalytic materials due to their structural analogy to graphene. However, the lack of chemical functionalization of borophene hinders its practical application in catalysis. Herein, we reported a massive production of freestanding few-layer 2D borophene oxide (BO) sheets with tunable active oxygen species by a moderate oxidation-assisted exfoliation method. State-of-the-art characterizations demonstrated the evolution of active oxygen species from surface B-O species at the initial stage to the intermediate BxOy (1.5 < x/y < 3) species and eventually to bulk B2O3 with an increasing oxidation duration. As a result, the 2D BO sheet with enhanced B-O species exhibited a strikingly high catalytic activity for the aerobic oxidation of benzylamine into N-benzylidenebenzylamine. The formation rate of imine reaches as high as 29.7 mmol gcatal-1 h-1 under mild reaction conditions, higher than that of pristine borophene, boron oxides, graphene oxide, and other metal/metal-free catalysts in the reported literature. Density functional theory calculations further revealed the critical role of surface B-O species, which favor the adsorption and N-H activation of benzylamine for high activity and suppress the deep dehydrogenation, yielding an outstanding imine selectivity (>90%). This work paves the route for a moderate and scalable synthesis of few-layer BO sheets with highly active B-O species toward advanced metal-free catalysis beyond graphene.

Transition-metal-free decarbonylation-oxidation of 3-arylbenzofuran-2(3H)-ones: access to 2-hydroxybenzophenones.

A transition-metal-free decarbonylation-oxidation protocol for the conversion of 3-arylbenzofuran-2(3H)-ones to 2-hydroxybenzophenones under mild conditions has been developed. NMR studies confirmed the role of in-situ-generated hydroperoxide in the conversion. The protocol was applied to a diverse range of substrates to access the target products in good to excellent yields. A structure-activity study for the 5-substituted-2-hydroxybenzophenones towards UV-protection abilities has been verified by mathematical calculations.

Bulky Phosphazenium Salt Controlling Chemoselective Terpolymerization of Epoxide, Anhydride and CO2: From Well-Defined Block to Truly Random Copolymers.

Copolymers with precise compositions and controlled sequences are great appealing for high-performance polymeric materials, but their synthesis is very challenging. In this study, tetrakis[tris(dimethylamino)phosphoranylidenamino] phosphonium chloride (P5Cl) and triethylboron (TEB) were chosen as the binary catalyst to synthesize both well-defined block and truly random poly(ester-carbonate) copolymers via the one-pot/one-step terpolymerization of epoxide/anhydride/CO2 under metal-free conditions. The bulky nature of phosphazenium cation not only led to loose cation-anion pairs and enhanced the reactivity, but also provided the chain-end an appropriate protection and improved the controllability. In particular, P5Cl/TEB with a molar ratio of 1/0.5 showed an extraordinary chemoselectivity for ring-opening alternating copolymerization (ROAC) of cyclohexene oxide (CHO) and phthalic anhydride (PA) first and then ROAC of CHO/CO2. Thus, well-defined block polyester-polycarbonate copolymers were synthesized by CHO/PA/CO2 terpolymerization. The chemoselectivity was easily tuned and the ROAC of CHO/PA and ROAC of CHO/CO2 occurred simultaneously with P5Cl/TEB = 1/2, producing truly random poly(ester-carbonate) copolymers from CHO/PA/CO2. In addition, this P5Cl/TEB catalyst and the strategy to regulate its chemoselectivity are versatile for various anhydrides, epoxides and initiators. Thus, poly(ester-carbonate) copolymers with varying sequences, compositions, and topologies are successfully synthesized, making it possible to compare their properties and to expand their applications.

Degradation of phenol by metal-free electro-fenton using a carbonyl-modified activated carbon cathode: Promoting simultaneous H2O2 generation and activation.

The low yield of hydrogen peroxide, narrow pH application range, and secondary pollution due to iron sludge precipitation are the major drawbacks of the electro-Fenton (EF) process. Metal-free electro-Fenton technology based on carbonaceous materials is a promising green pollutant degradation technology. Activated carbon cathodes enriched with carbonyl functional groups were prepared using a two-step annealing method for the degradation of phenol pollutants. The •OH in the activation process of H2O2 were identified using the EPR test technique. The action mechanism of carbonyl groups on H2O2 activation was investigated in conjunction with density functional theory (DFT) calculations. The EPR tests demonstrated that the modified activated carbon could promote the in-situ activation of H2O2 to •OH. And the results of material analysis and DFT showed that C=O could facilitate the activation of hydrogen peroxide through the electron transfer mechanism as an electron-donating group. Electrochemical tests showed that both the oxygen reduction activity and 2e-ORR selectivity of the modified activated carbons were significantly improved. Compared with the original activated carbon cathode and EF, the degradation efficiency of phenol in the ACNH-1000/GF cathode was increased by 58.10% and 45.61%, respectively. Compared with EF, ACNH-1000/GF metal-free electro-Fenton effectively expands the pH application range, and is proven to be less affected by solution initial pH, while avoiding secondary pollution. The metal-free electro-Fenton system can save more than a quarter of the cost of EF system. This study has a deep understanding of the reaction mechanism of the carbonyl modified activated carbon, and provides valuable insights for the design of metal-free catalysts, so as to promote its application in the degradation of organic pollutants.

In Vivo Optogenetics Based on Heavy Metal-Free Photon Upconversion Nanoparticles.

Photon upconversion (UC) from red or near-infrared (NIR) light to blue light is promising for in vivo optogenetics. However, the examples of in vivo optogenetics have been limited to lanthanide inorganic UC nanoparticles, and there have been no examples of optogenetics without using heavy metals. Here the first example of in vivo optogenetics using biocompatible heavy metal-free TTA-UC nanoemulsions is shown. A new organic TADF sensitizer, a boron difluoride curcuminoid derivative modified with a bromo group, can promote intersystem crossing to the excited triplet state, significantly improving TTA-UC efficiency. The TTA-UC nanoparticles formed from biocompatible surfactants and methyl oleate acquire water dispersibility and remarkable oxygen tolerance. By combining with genome engineering technology using the blue light-responding photoactivatable Cre-recombinase (PA-Cre), TTA-UC nanoparticles promote Cre-reporter EGFP expression in neurons in vitro and in vivo. The results open new opportunities toward deep-tissue control of neural activities based on heavy metal-free fully organic UC systems.

The Facile Production of p-Chloroaniline Facilitated by an Efficient and Chemoselective Metal-Free N/S Co-Doped Carbon Catalyst.

The catalytic hydrogenation of the toxic and harmful p-chloronitrobenzene to produce the value-added p-chloroaniline is an essential reaction for the sustainable chemical industry. Nevertheless, ensuring satisfactory control of its chemoselectivity is a great challenge. In this work, a N/S co-doped metal-free carbon catalyst has been fabricated by using cysteine as a source of C, N, and S. The presence of calcium citrate (porogen agent) in the mixture subjected to pyrolysis provided the carbon with porosity, which permitted us to overcome the issues associated with the loss of heteroatoms during an otherwise necessary activation thermal treatment. Full characterization was carried out and the catalytic performance of the metal-free carbon material was tested in the hydrogenation reaction of p-chloronitrobenzene to selectively produce p-chloroaniline. Full selectivity was obtained but conversion was highly dependent on the introduction of S due to the synergetic effect of S and N heteroatoms. The N/S co-doped carbon (CYSCIT) exhibits a mesoporous architecture which favors mass transfer and a higher doping level, with more exposed N and S doping atoms which act as catalytic sites for the hydrogenation of p-chloronitrobenzene, resulting in enhanced catalytic performance when compared to the N-doped carbon obtained from melamine and calcium citrate (MELCIT) used as a reference.

Novel Metal-Free Nanozyme for Targeted Imaging and Inhibition of Atherosclerosis via Macrophage Autophagy Activation to Prevent Vulnerable Plaque Formation and Rupture.

Atherosclerosis is a primary cause of cardiovascular and cerebrovascular diseases, with the unpredictable rupture of vulnerable atherosclerotic plaques enriched with lipid-laden macrophages being able to lead to heart attacks and strokes. Activating macrophage autophagy presents itself as a promising strategy for preventing vulnerable plaque formation and reducing the risk of rupture. In this study, we have developed a novel metal-free nanozyme (HCN@DS) that integrates the functions of multimodal imaging-guided therapy for atherosclerosis. HCN@DS has demonstrated high macrophage-targeting abilities due to its affinity toward scavenger receptor A (SR-A), along with excellent photoacoustic and photothermal imaging capabilities for guiding the precise treatment. It combines mild photothermal effects with moderate reactive oxygen species (ROS) generation to treat atherosclerosis. This controlled approach activates autophagy in atherosclerotic macrophages, inhibiting foam cell formation by reducing the uptake of oxidized low-density lipoproteins (oxLDL) and promoting efferocytosis and cholesterol efflux in macrophages. Additionally, it prevents plaque rupture by inhibiting apoptosis and inflammation within the plaque. Therefore, this metal-free nanozyme holds great potential for reducing the risk of atherosclerosis due to its high biosafety, excellent targeting ability, dual-modality imaging capability, and appropriate modulation of autophagy.

Entropy-Driven 60 mol% Li Electrolyte for Li Metal-Free Batteries.

Highly Li-concentrated electrolytes are acknowledged for their compatibility with Li metal negative electrodes and high voltage positive electrodes to achieve high-energy Li metal batteries, showcasing stable and facile interfaces for Li deposition/dissolution and high anodic stability. This study aims to explore a highly concentrated electrolyte by adopting entropy-driven chemistry for Li metal-free (so-called anode-free) batteries. The combination of lithium bis(fluorosulfonyl)amide (LiFSA) and lithium trifluoromethanesulfonate (LiOTf) salts in a pyrrolidinium-based ionic liquid is found to significantly modify the coordination structure, resulting in an unprecedented 60 mol% Li concentration and a low solvent-to-salt ratio of 0.67:1 in the electrolyte system. This novel 60 mol% Li electrolyte demonstrates unique coordination stricture, featuring a high ratio of monodentate-anion structures and aggregates, which facilitates an enhanced Li+ transference number and improved anodic stability. Moreover, the developed electrolyte provides a facile de-coordination process and leads to the formation of an anion-based solid electrolyte interface, which enables stable Li deposition/dissolution properties and demonstrates excellent cycling stability in the Li metal-free full cell with a Li[Ni0.8Co0.1Mn0.1]O2 (NCM811) positive electrode.

The Development of Metal-Free Porous Organic Polymers for Sustainable Carbon Dioxide Photoreduction.

A viable tactic to effectively address the climate crisis is the production of renewable fuels via photocatalytic reactions using solar energy and available resources like carbon dioxide (CO2) and water. Organic polymer material-based photocatalytic materials are thought to be one way to convert solar energy into valuable chemicals and other solar fuels. The use of porous organic polymers (POPs) for CO2 fixation and capture and sequestration to produce beneficial compounds to reduce global warming is still receiving a lot of interest. Visible light-responsive organic photopolymers that are functionally designed and include a large number of heteroatoms and an extended π-conjugation allow for the generation of photogenerated charge carriers, improved absorption of visible light, increased charge separation, and decreased charge recombination during photocatalysis. Due to their rigid structure, high surface area, flexible pore size, permanent porosity, and adaptability of the backbone for the intended purpose, POPs have drawn more and more attention. These qualities have been shown to be highly advantageous for numerous sustainable applications. POPs may be broadly categorized as crystalline or amorphous according to how much long-range order they possess. In terms of performance, conducting POPs outperform inorganic semiconductors and typical organic dyes. They are light-harvesting materials with remarkable optical characteristics, photostability, cheap cost, and low cytotoxicity. Through cocatalyst loading and morphological tweaking, this review presents optimization options for POPs preparation techniques. We provide an analysis of the ways in which the preparative techniques will affect the materials' physicochemical characteristics and, consequently, their catalytic activity. An inventory of experimental methods is provided for characterizing POPs' optical, morphological, electrochemical, and catalytic characteristics. The focus of this review is to thoroughly investigate the photochemistry of these polymeric organic photocatalysts with an emphasis on understanding the processes of internal charge generation and transport within POPs. The review covers several types of amorphous POP materials, including those based on conjugated microporous polymers (CMPs), inherent microporosity polymers, hyper-crosslinked polymers, and porous aromatic frameworks. Additionally, common synthetic approaches for these materials are briefly discussed.

Catalytic Edges in One-Dimensional Covalent Organic Frameworks for the Oxygen Reduction Reaction.

Metal-free covalent organic frameworks (COFs) are employed in oxygen reduction reactions (ORR) because of their diverse structural units and controllable catalytic sites, and the edge sites have high catalytic activity than the basal sites. However, it is still challenge to modulate the edge sites in COFs, because the extended frameworks in two- or three-dimensional topologies resulted in limited edge parts. In this study, we have demonstrated the edge site modulation engineering based on one dimensional (1D) COFs to catalyze the ORR, which featured distinct edge groups-carbonyl, diaminopyrazine, phenylimidazole, and benzaldehyde imidazole units. The synthesized COFs have same ordered frameworks, similar pore structure, but had different electronic states of the carbons along the edge sites, which results in tailored catalytic properties. Notably, the COF functionalized with a phenylimidazole edge group exhibited superior catalytic performance compared to the other synthesized COFs. And the theoretical calculation further revealed the different edge sites had tunable binding ability of the intermediates OOH*, which contributed modulated activity. Our findings introduce a novel way for designing COFs optimized for ORR applications through molecular level control of edge sites.

Improvement of Photocatalytic CO2 Reduction with Conjugated Organic Polymers by Rational Modulation of Donor, Acceptor and Bonding Method.

The use of metal-free catalysts to convert CO2 into valuable chemicals is very challenging. Here, we synthesized a conjugated organic polymer (TpTf-1) featuring 2,4,6-Triphenyl-1,3,5-Triazine as the acceptor unit, triphenylamine as the donor unit, and vinylidene bond as the linkage. The local structure of donor-acceptor (D-A) forms an intramolecular electric field that can promote the separation of photogenerated electrons and charges, meanwhile, the vinylidene bond can further change the charge distribution to promote exciton dissociation. Without the use of photosensitizers, the TpTf-1 exhibits outstanding selectivity of CO of up to 91.96 %, with a production rate of 45.2 µmol g-1 h-1 at visible light, which is 3.4-fold than TaTf-1 with the same D-A structure but linking in imine bond and is 2.8-fold than TpTf-2 linking in vinylidene bond but with a different donor unit. Moreover, TpTf-1 has a CO production rate of up to 117.3 µmol g-1 h-1 under full wavelength light irradiation.