Dual Cross-Linked Networks Reinforced Polyimide Foams with Outstanding Piezoelectric Properties and Heat Resistance Performance.

The application of traditional isocyanate-based polyimide (PI) foams is highly hindered due to limited flame retardancy, poor mechanical properties, and relatively single functionality. Herein, we propose an effective method to fabricate dual cross-linked polyimide/bismaleimide (PI-BMI) foams with outstanding heat resistance and enhanced mechanical properties by incorporating bis(3-ethyl-5-methyl-4-maleimidophenyl)methane (ME-BMI) as the interpenetrating network. The results show that the prepared PI-BMI composite foams exhibit enhanced mechanical properties with lightweight characteristics (23-80 kg·m-3). When the ME-BMI loading reached 120 wt %, the tensile and compressive strength of PI-BMI composite foam can reach 1.9 and 7.8 MPa, which are 9.6 and 63.3 times higher than that of pure PI foam, respectively. In comparison with PIF-0, the 10% heat loss temperature (Td,10%) of PIF-90 improved by 156 °C. Moreover, the PI-BMI foam piezoelectric sensor containing fluorine groups presents a short response time (14.22 ms), high sensitivity (0.266 V/N), and outstanding stability (10 000 cycles). Besides, the sensor can accurately monitor human activity in different states. This work provides a promising strategy for designing multifunctional PI foams, making them suitable for applications in aerospace and microelectronics.

Enhancing the Efficiency of Flexible, Large-Area, ITO-Free Organic Photovoltaic Devices.

The development of flexible ITO-free devices is crucial for the industrial advancement of organic photovoltaic (OPV) technology. Here, a novel ITO-free device architecture is proposed, and ITO-free OPV devices are realized on glass substrates with performance comparable to that of ITO-based devices. It is also demonstrated that the performance of ITO-free devices on polyethylene terephthalate (PET) substrates is limited due to the higher surface roughness of PET, leading to high voltage losses, low device quantum efficiency, and high device leakage current. To address the issue of high roughness on the PET surface, a polyimide (PI) modification strategy is developed and the PI-modified PET is employed as the substrate to construct flexible ITO-free OPV devices and large-area modules with an active area of up to 16.5 cm2. This approach leads to decreased trap-assisted recombination losses, enhanced exciton dissociation efficiency, and a reduced density of pinholes in flexible OPV devices, resulting in improved photovoltaic performance under both strong and weak illumination conditions. The outcomes of this work are expected to advance the industrial development of flexible organic photovoltaic technology.

Small-angle X-ray scattering analysis of poly(amic acid) dispersed in a liquid matrix to understand the size control of polyimide nanoparticles.

Poly(amic |acid) |nanoparticles |prepared |by ||precipitation |polymerization with a dispersant were evaluated by small-angle X-ray scattering (SAXS) and field-emission scanning electron microscopy (FE-SEM). The particle size evaluation of poly(amic acid) nanoparticles in the liquid phase by SAXS was performed to gain insight into the size control of poly(amic acid) nanoparticles, and showed good agreement with visual observation by FE-SEM, explaining the effect of the dispersant in obtaining polyimide nanoparticles with small particle size. This indicates that the particle size is maintained without change during the solvent evaporation process. The polyamide nanoparticles controlled by the dispersant effect maintained their size after imidization, and polyimide nanoparticles with a minimum radius of about 60 nm were prepared.

p/n-Type Polyimide Covalent Organic Frameworks for High-Performance Cathodes in Sodium-Ion Batteries.

Covalent organic frameworks (COFs) are viewed as promising organic electrode materials for metal-ion batteries due to their structural diversity and tailoring capabilities. In this work, firstly using the monomers N,N,N',N'-tetrakis(4-aminophenyl)-1,4-phenylenediamine (TPDA) and terephthaldehyde (TA), p-type phenylenediamine-based imine-linked TPDA-TA-COF is synthesized. To construct a bipolar redox-active, porous and highly crystalline polyimide-linked COF, i.e., TPDA-NDI-COF, n-type 1,4,5,8-naphthalene tetracarboxylic dianhydride (NDA) molecules are incorporated into p-type TPDA-TA-COF structure via postsynthetic linker exchange method. This tailored COF demonstrated a wide potential window (1.03.6 V vs Na+/Na) with dual redox-active centers, positioning it as a favorable cathode material for sodium-ion batteries (SIBs). Owing to the inheritance of multiple redox functionalities, TPDA-NDI-COF can deliver a specific capacity of 67 mAh g-1 at 0.05 A g-1, which is double the capacity of TPDA-TA-COF (28 mAh g-1). The incorporation of carbon nanotube (CNT) into the TPDA-NDI-COF matrix resulted in an enhancement of specific capacity to 120 mAh g-1 at 0.02 A g-1. TPDA-NDI-50%CNT demonstrated robust cyclic stability and retained a capacity of 92 mAh g-1 even after 10 000 cycles at 1.0 A g-1. Furthermore, the COF cathode exhibited an average discharge voltage of 2.1 V, surpassing the performance of most reported COF as a host material.

Enhancing moisture-resistance in polyimide aerogels: A novel hydrophobic modification approach with ortho-positioned long-chain barriers.

Polyimide (PI) aerogels possess significant potential for various applications due to their outstanding mechanics and thermal insulation. However, a major drawback of these aerogels is their susceptibility to moisture, which not only compromises their insulative performance but also leads to an increase in weight. To address this issue, we have developed a moisture-resistance technique by incorporating a long-chain hydrophobic barrier at the ortho position relative to the imide groups to enhance the moisture-resistance of the PI aerogels. This approach involved using a series of diamines with hydroxyl groups strategically located at the ortho position of imide groups as reactants. The resulting PI aerogels demonstrated a significant improvement in water resistance, reducing water-uptake to merely one-tenth of that recorded in unmodified samples. Furthermore, the effectiveness of this hydrophobic modification was validated through molecular dynamics simulations, which indicated a diffusion coefficient of 4.41 × 10-11 m2/s after modification. These findings represent a considerable advancement in developing effective methods for hydrophobic modification of PI aerogels, with potential applications in aerospace, electronic communications, and environmental protection.

Hydroxyl-Functionalized Polymers of Intrinsic Microporosity and Dual-Functionalized Blends for High-Performance Membrane-Based Gas Separations.

Membrane technology has shown significant growth during the past two decades in the gas separation industry due to its energy-savings, compact and modular design, continuous operation, and environmentally benign nature. Robust materials with higher permeability and selectivity are key to reduce capital and operational cost, pushing it forward to replace or debottleneck conventional energy-intensive unit operations such as distillation. Recently designed ladder polymers of intrinsic microporosity (PIM) and polyimides of intrinsic microporosity (PIM-PI) with pores <20 Å have demonstrated excellent gas permeation performance. Here, a series of plasticization-resistant PIM-based membrane materials is reported, including the first example of a hydroxyl-functionalized triptycene- and Tröger's base-derived ladder PIM and two PIM-PI homopolymers and a series of dual-functionalized polyimide blends containing hydroxyl- and carboxyl-functionalized groups. Specifically, 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)-based PIM-PI blends demonstrated extremely high selectivity for a variety of industrially important applications. An optimized polyimide blend containing ─OH and ─COOH groups showed permselectivity values of 136 for CO2/CH4, 11.4 for O2/N2 and 636 for H2/CH4. Such extreme size-sieving capabilities are attributed to physical crosslinking induced by strong hydrogen bonding forming tightly structured polymer networks. The study provides a new general strategy for developing plasticization resistant, robust, and highly-selective PIM-based membrane materials.

Recent Advances in Fluorescent Polyimides.

Polyimide (PI) refers to a type of high-performance polymer containing imide rings in the main chain, which has been widely used in fields of aerospace, microelectronic and photonic devices, gas separation technology, and so on. However, traditional aromatic PIs are, in general, the inefficient fluorescence or even no fluorescence, due to the strong inter- and intramolecular charge transfer (CT) interactions causing unavoidable fluorescence quenching, which greatly restricts their applications as light-emitting functional layers in the fabrication of organic light-emitting diode (OLED) devices. As such, the development of fluorescent PIs with high fluorescence quantum efficiency for their application fields in the OLED is an important research direction in the near future. In this review, we provide a comprehensive overview of fluorescent PIs as well as the methods to improve the fluorescence quantum efficiency of PIs. It is anticipated that this review will serve as a valuable reference and offer guidance for the design and development of fluorescent PIs with high fluorescence quantum efficiency, ultimately fostering further progress in OLED research.

Mechanisms of Atomic Oxygen Erosion in Fluorinated Polyimides Investigated by Molecular Dynamics Simulations.

Traditional polyimides have highly conjugated structures, causing significant coloration under visible light. Fluorinated colorless polyimides, known for their light weight and excellent optical properties, are considered ideal for future aerospace optical lenses. However, their lifespan in low Earth orbit is severely limited by high-density atomic oxygen (AO) erosion, and the degradation behavior of fluorinated polyimides under AO exposure is not well understood. This study uses reactive molecular dynamics simulations to model two fluorinated polyimides, PMDA-TFMB and 6FDA-TFMB, with different fluorine contents, to explore their degradation mechanisms under varying AO concentrations. The results indicate that 6FDA-TFMB has slightly better resistance to erosion than PMDA-TFMB, mainly due to the enhanced chemical stability from its -CF3 groups. As AO concentration increases, widespread degradation of the polyimides occurs, with AO-induced cleavage and temperature-driven pyrolysis happening simultaneously, producing CO and OH as the main degradation products. This study uncovers the molecular-level degradation mechanisms of fluorinated polyimides, offering new insights for the design of AO erosion protection systems.

Boosting of Redox-Active Polyimide Porous Organic Polymers with Multi-Walled Carbon Nanotubes towards Pseudocapacitive Energy Storage.

Redox-active porous organic polymers (POPs) demonstrate significant potential in supercapacitors. However, their intrinsic low electrical conductivity and stacking tendencies often lead to low utilization rates of redox-active sites within their structural units. Herein, polyimide POPs (donated as PMTA) are synthesized in situ on multi-walled carbon nanotubes (MWCNTs) from tetramino-benzoquinone (TABQ) and 1,4,5,8-naphthalene tetracarboxylic dianhydride (PMDA) monomers. The strong π-π stacking interactions drive the PMTA POPs and the MWCNTs together to form a PMTA/MWCNT composite. With the assistance of MWCNTs, the stacking issue and low conductivity of PMTA POPs are well addressed, leading to the obvious activation and enhanced utilization of the redox-active groups in the PMTA POPs. PMTA/MWCNT then achieves a high capacitance of 375.2 F g-1 at 1 A g-1 as compared to the pristine PMTA POPs (5.7 F g-1) and excellent cycling stability of 89.7% after 8000 cycles at 5 A g-1. Cyclic voltammetry (CV) and in situ Fourier-Transform Infrared (FT-IR) results reveal that the electrode reactions involve the reversible structural evolution of carbonyl groups, which are activated to provide rich pseudocapacitance. Asymmetric supercapacitors (ASCs) assembled with PMTA/MWCNTs and activated carbon (AC) offer a high energy density of 15.4 Wh kg-1 at 980.4 W kg-1 and maintain a capacitance retention of 125% after 10,000 cycles at 5 A g-1, indicating their good potential for practical applications.

Investigation of Partial Discharge Transformation Characteristics in Polyimide (PI) Insulations under High-Frequency Electric Stress.

This research delves into the primary issue of polyimide (PI) insulation failures in high-frequency power transformers (HFPTs) by scrutinizing partial discharge development under high-frequency electrical stress. This study employs an experimental approach coupled with a plasma simulation model for a ball-sphere electrode structure. The simulation model integrates the particle transport equation, Poisson equation, and complex chemical reactions to ascertain microscopic parameters, including plasma distribution, electric field, electron density, electron temperature, surface, and space charge distribution. The effect of the voltage polarity and electrical energy on the PD process is also discussed. The contact point plays a pivotal role in triggering partial discharges and culminating in the breakdown of PI insulation. Asymmetry phenomena were found between positive and negative half-cycles by analyzing the PD data stage by stage. A significant number of PDs increased at every stage and the PD amplitude was higher during the negative cycle at the initial stage, but in later stages, the PD amplitude was found to be higher in the positive half-cycle, and scanning electron microscopy (SEM) revealed that the maximum damage occurred near the contact point junction. The simulation results show that the plasma initially accumulates the electron density near the contact point junction. Under the action of the electric field, plasma starts traveling at the PI surface outward from the contact point. Before the PD activity, all parameters have higher values in the plasma head. The microscopic parameters reveal maximum values near the contact point junction, during PD activities where significant damage takes place. These parameter distributions exhibit a decreasing trend over time as when the PD activity ends. The model's predictions are consistent with the experimental data. The paper lays the foundation for future research in polymer insulation design under high-frequency electrical stress.