Electrospun Poly-ε-Caprolactone Nanofibers Incorporating Keratin Hydrolysates as Innovative Antioxidant Scaffolds.

This manuscript describes the development and characterization of electrospun nanofibers incorporating bioactive hydrolysates obtained from the microbial bioconversion of feathers, a highly available agro-industrial byproduct. The electrospun nanofibers were characterized using different instrumental methods, and their antioxidant properties and toxicological potential were evaluated. Keratin hydrolysates (KHs) produced by Bacillus velezensis P45 were incorporated at 1, 2.5, and 5% (w/w) into poly-ε-caprolactone (PCL; 10 and 15%, w/v solutions) before electrospinning. The obtained nanofibers were between 296 and 363 nm in diameter, showing a string-like morphology and adequate structural continuity. Thermogravimetric analysis showed three weight loss events, with 5% of the mass lost up to 330 °C and 90% from 350 to 450 °C. Infrared spectroscopy showed typical peaks of PCL and amide bands corresponding to keratin peptides. The biological activity was preserved after electrospinning and the hemolytic activity was below 1% as expected for biocompatible materials. In addition, the antioxidant capacity released from the nanofibers was confirmed by DPPH and ABTS radical scavenging activities. The DPPH scavenging activity observed for the nanofibers was greater than 30% after 24 h of incubation, ranging from 845 to 1080 µM TEAC (Trolox equivalent antioxidant capacity). The antioxidant activity for the ABTS radical assay was 44.19, 49.61, and 56.21% (corresponding to 972.0, 1153.3, and 1228.7 µM TEAC) for nanofibers made using 15% PCL with 1, 2.5, and 5% KH, respectively. These nanostructures may represent interesting antioxidant biocompatible materials for various pharmaceutical applications, including wound dressings, topical drug delivery, cosmetics, and packaging.

Production and performance evaluation of chitosan/collagen/honey nanofibrous membranes for wound dressing applications.

Persistent bacterial infections are the leading risk factor that complicates the healing of chronic wounds. In this work, we formulate mixtures of polyvinyl alcohol (P), chitosan (CH), collagen (C), and honey (H) to produce nanofibrous membranes with healing properties. The honey effect at concentrations of 0 % (PCH and PCHC), 5 % (PCHC-5H), 10 % (PCHC-10H), and 15 % (PCHC-15H) on the physicochemical, antibacterial, and biological properties of the developed nanofibers was investigated. Morphological analysis by SEM demonstrated that PCH and PCHC nanofibers had a uniform and homogeneous distribution on their surfaces. However, the increase in honey content increased the fiber diameter (118.11-420.10) and drastically reduced the porosity of the membranes (15.79-92.62 nm). The addition of honey reduces the water vapor transmission rate (WVTR) and the adsorption properties of the membranes. Mechanical tests revealed that nanofibers were more flexible and elastic when honey was added, specifically the PCHC-15H nanofibers with the lowest modulus of elasticity (15 MPa) and the highest elongation at break (220 %). Also, honey significantly improved the antibacterial efficiency of the nanofibers, mainly PCHC-15H nanofibers, which presented the best bacterial reduction rates against Staphylococcus aureus (59.84 %), Pseudomonas aeruginosa (47.27 %), Escherichia coli (65.07 %), and Listeria monocytogenes (49.58 %). In vitro tests with cell cultures suggest that nanofibers were not cytotoxic and exhibited excellent biocompatibility with human fibroblasts (HFb) and keratinocytes (HaCaT), since all treatments showed higher or similar cell viability as opposed to the cell control. Based on the findings, PVA-chitosan-collagen-honey nanofibrous membranes have promise as an antibacterial dressing substitute.

Unveiling the potential of cellulose, chitosan and polylactic acid as precursors for the production of green carbon nanofibers with controlled morphology and diameter.

Carbon nanofibers (CNFs) are very promising materials with application in many fields, such as sensors, filtration systems, and energy storage devices. This study aims to explore the use of eco-friendly biopolymers for CNF production, finding novel, suitable and sustainable precursors and thus prioritising environmentally conscious processes and ecological compatibility. Polymeric nanofibers (PNFs) using cellulose acetate, polylactic acid, and chitosan as precursors were successfully prepared via electrospinning. Rheological testing was performed to determine suitable solution concentrations for the production of PNFs with controlled diameter and appropriate morphology. Their dimensions and structure were found to be significantly influenced by the solution concentration and electrospinning flow rate. Subsequently, the electrospun green nanofibers were subject to stabilisation and carbonisation to convert them into CNFs. Thermal behaviour and chemical/structural changes of the nanofibers during stabilisation were investigated by means of thermogravimetric analysis and Fourier-transform infrared spectroscopy, while the final morphology of the fibers after stabilisation and carbonisation was examined through scanning electron microscopy to determine the optimal stabilisation parameters. The optimal fabrication parameters for cellulose and chitosan-based CNFs with excellent morphology and thermal stability were successfully established, providing valuable insight and methods for the sustainable and environmentally friendly synthesis of these promising materials.

Miniaturized Biosensors Based on Lanthanide-Doped Upconversion Polymeric Nanofibers.

Electrospun nanofibers possess a large surface area and a three-dimensional porous network that makes them a perfect material for embedding functional nanoparticles for diverse applications. Herein, we report the trends in embedding upconversion nanoparticles (UCNPs) in polymeric nanofibers for making an advanced miniaturized (bio)analytical device. UCNPs have the benefits of several optical properties, like near-infrared excitation, anti-Stokes emission over a wide range from UV to NIR, narrow emission bands, an extended lifespan, and photostability. The luminescence of UCNPs can be regulated using different lanthanide elements and can be used for sensing and tracking physical processes in biological systems. We foresee that a UCNP-based nanofiber sensing platform will open opportunities in developing cost-effective, miniaturized, portable and user-friendly point-of-care sensing device for monitoring (bio)analytical processes. Major challenges in developing microfluidic (bio)analytical systems based on UCNPs@nanofibers have been reviewed and presented.

Nanographene-Au fine-tuning to intensify plasmonic-resonance of polymeric hybrid bionanosystem for synergistic phototherapy and nerve photobiomodulation.

Here, we report the multi-photo-bioactivity of the plasmonic-nano graphitic coordinated polycaprolactone-based aligned nanofibrous scaffolds-based bionanosystem for photothermal breast and colon cancer therapies and peripheral nerve photobiomodulation. The size-optimized colloidal reduced graphene oxide (nRGO, 180 nm) nanosheets, for enhanced photothermal impact, were surface-functionalized with gold nanospheres (AuNPs) to prepare the nRGO@AuNP monodispersed nano-composite and then doped 2.0 mg of nRGO@AuNP in biocompatible and biodegradable polymer polycaprolactone (PCL) to fabricate the nRGO@AuNP-PCL (2.0 mg) plasmonic aligned nanofibrous scaffolds. More than 90% of cancer cells, breast cancer (MCF-7) as well as colon cancer (CT-26), ablated after 5 min of low NIR (808 nm) laser power (0.72 W/cm2) illumination with nRGO@AuNP-PCL (2.0 mg) aligned nanofibrous scaffolds. Besides, the nRGO@AuNP-PCL (2.0 mg) provided an extraordinary microenvironment for adhesion, nerve growth, proliferation, and differentiation of PC12 and S42 cells which mimics the natural extracellular matrix. The 2.5-fold increase in neurite length was observed with NIR illumination after 3 days whereas 1.7-fold was found without NIR illumination after 7 days in comparison to PCL (pure). The current findings will be useful to provide a new crucial approach for preparing biocompatible multifunctional composite plasmonic nanofibers as a highly efficient distinct platform for photothermal therapies and promising bioimplants to overcome the loss of sensation after cancer surgery through nerve photobiomodulation.

Effects of Electrospun Nanofibers on Motor Function Recovery After Spinal Cord Injury: A Systematic Review and Meta-Analysis.

Nanofibers made by electrospinning have been used as bridging materials in animal models to regenerate nerves after spinal cord injury (SCI). In this meta-analysis study, we investigated the effect of these nanofibers on the motor function of animals after SCI. An extensive search in databases was performed. After primary and secondary screening, data included functional behavior, expression of glial fibrillary acidic protein, neurofilament-200 (NF-200), and ß-tubulin III were taken from the articles. The quality control of the articles, statistical analysis, and subgroup analysis were performed. The results from 14 articles and 16 separate experiments showed that electrospun nanofibers used alone could improve motor behavior and reduce glial injury after SCI.

Development of Nylon 6 nanofibers modified with Cyanex-272 for cobalt recovery.

With a worldwide ever increasing demand for metals, particularly for the manufacture of electronics and batteries, there is not only a concurrent need to recover these materials from their subsequent waste streams but also a need to make advancements to do this via development of more efficient and eco-friendly processes for metal recovery; solid-phase extraction can be considered a promising alternative to conventional processes. This work studied the production of novel nanofibers modified with Cyanex 272 and their application in the recovery of cobalt present in aqueous solution The nanofibers produced by forcespinning were characterized by SEM, FT-IR and TGA and the extraction of cobalt was evaluated by variation of the pH, solid:liquid (S:L) ratio, extraction time and Cyanex 272 content in the nanofibers. The best extraction efficiency was 99.96%, achieved under the following conditions: pH 8; (S:L) ratio of 1:200; 25% of Cyanex 272; Extraction time of 60 min. The maximum extraction capacity obtained was 15.46 mg Co/g of nanofiber and 70.15 mg Co/g of extractor. In successive reuse cycles, the results demonstrated that the extraction efficiency was maintained at over 85%. The findings showed that Nylon 6/Cyanex 272 nanofibers are a new robust and promising material for the recovery of heavy metals from aqueous solution, confirming that nanofibers have an efficiency similar to conventional liquid-liquid extraction, without the disadvantage of volatile organic compounds emissions generated by the use of organic diluents.

Fabrication and optimization of electrospun polymeric nanofibers loaded with 5-fluorouracil and rosemary extract.

BACKGROUND: Topical 5-fluorouracil [5FU] is one of the mostly prescribed medications for different types of skin cancer; however, it is associated with drug resistance and adverse effects. Rosemary extract has promising dose-dependent antitumor effects, as well as a synergistic effect in combination with 5-fluorouracil besides sensitizing the 5-FU-resistant cells. OBJECTIVE: Polymeric nanofibers loaded with 5FU and rosemary extract were optimized to combine both ingredients in one controlled release drug delivery system, aiming to enhance the efficacy while retaining the adverse effects. METHOD: Polymeric nanofibers loaded with 5-FU and rosemary were fabricated via electrospinning technique. Design expert software was utilized to study the effect of independent variables including polymer concentration, voltage, and feeding rate on the characteristics of the resulting nanofibers. Afterwards, the FTIR spectrum and release kinetic of the drug and extract from the optimized nanofibers and their cytotoxic effect against A375 cell line were investigated. RESULTS: The formulation composed of 6.65% PVA electrospun at 1 mL.h-1 and 17.5kV was chosen as the optimum fabrication condition. The mean diameter of the optimized nanofibers was 755 nm. The drug and rosemary extract contents were 75.38 and 93.42%, respectively. The fabrication yield was 100%, bioadhesion force was 1.28 N, and bead abundance was 10 per field. The cytotoxicity of the optimized formulation was significantly higher than the control groups. CONCLUSION: According to the appropriate loading percent, release efficiency and release kinetics, bioadhesion force, and cytotoxicity, these nanofibers could be further investigated as a topical treatment option to increase the efficacy of 5-FU.

Nanohydroxyapatite Electrodeposition onto Electrospun Nanofibers: Technique Overview and Tissue Engineering Applications.

Nanocomposite scaffolds based on the combination of polymeric nanofibers with nanohydroxyapatite are a promising approach within tissue engineering. With this strategy, it is possible to synthesize nanobiomaterials that combine the well-known benefits and advantages of polymer-based nanofibers with the osteointegrative, osteoinductive, and osteoconductive properties of nanohydroxyapatite, generating scaffolds with great potential for applications in regenerative medicine, especially as support for bone growth and regeneration. However, as efficiently incorporating nanohydroxyapatite into polymeric nanofibers is still a challenge, new methodologies have emerged for this purpose, such as electrodeposition, a fast, low-cost, adjustable, and reproducible technique capable of depositing coatings of nanohydroxyapatite on the outside of fibers, to improve scaffold bioactivity and cell-biomaterial interactions. In this short review paper, we provide an overview of the electrodeposition method, as well as a detailed discussion about the process of electrodepositing nanohydroxyapatite on the surface of polymer electrospun nanofibers. In addition, we present the main findings of the recent applications of polymeric micro/nanofibrous scaffolds coated with electrodeposited nanohydroxyapatite in tissue engineering. In conclusion, comments are provided about the future direction of nanohydroxyapatite electrodeposition onto polymeric nanofibers.

Spectrochemical and biochemical assay comparison study of the healing effect of the Aloe vera and Hypericum perforatum loaded nanofiber dressings on diabetic wound.

Diabetic wounds have a slow healing process and easy to be infected. In addition to current drug treatments, supportive approaches are needed for diabetic wound treatment. In this study, we aimed to load Aloe Vera (AV) and Hypericum perforatum oil (HPO) with PCL/Ge (Poly (ɛ-caprolactone)/Gelatine) polymeric biodegradable by electrospinning method into nanofiber dressings on an experimental diabetic wound model to compare the diabetic wound healing effect. Changes in the amount and chemical structure of phospholipids, proteins, and lipids were investigated in the blood and serum samples of the animals using Fourier transform infrared (FTIR) analysis. To evaluate biological events associated with the wound repair process in inflammatory phase we used oxidant and antioxidant status to determine the healing status of wounds such as Total antioxidant status (TAS), Total oxidant level (TOS) and tumor necrosis factor alpha (TNF-α) levels. TOS level increased in DM groups and decreased in the AV and HPO group. Oxidative stress index decreased and TNF-α level increased in the HPO group. FTIR spectra showed changes in the phospholipids, proteins, and carbon chain of lipids in the whole blood as well as serum of DM rats. FTIR spectra combined with Principal component analysis (PCA) showed, that treated DM rats by AV and HPO caused return chemical structure of blood and serum to this observed in control group. Higher similarity with control group for HPO rats was observed. HPO is better than AV in the alternative for healing on diabetic wound. Thus, we have demonstrated that IR spectroscopy and multivariate data analysis and biochemical assays are consistent and correlative with each other.

Core-Shell PMIA@PVdF-HFP/Al2O3 Nanofiber Mats In Situ Coaxial Electrospun on LiFePO4 Electrode as Matrices for Gel Electrolytes.

Gel electrolytes show certain advantages over conventional liquid and solid electrolytes, but their mechanical strength and surface adhesion to the electrode remain to be improved. To address the challenges, we design and fabricate herein the core-shell nanofiber mats in situ on the LiFePO4 electrode as matrices for gel electrolytes, in which the core is poly(m-phenylene isophthalamide) (PMIA) nanofiber and the shell are composite of Al2O3 nanoparticles and poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP). The mechanical property of the core-shell polymeric nanofiber mats and their surface interaction with LiFePO4 electrode are characterized complementarily using dynamic thermomechanical analysis and scanning electron microscopy. The electrochemical properties of the gel electrolytes based on the as-prepared matrices after being loaded with lithium salt solution are studied systematically on half coin cells. It is found that the ultimate strength of the core-shell PMIA@PVdF-HFP/Al2O3 mat can reach 6.70 MPa, 2 times higher than that of the PVdF-HFP/Al2O3 nanofiber mat. Meanwhile, the shell PVdF-HFP/Al2O3 can ensure manifest surface affinity to the LiFePO4 electrode and enhance lithium-ion conductance. Thus, the as-assembled LiFePO4 half coin cells using PMIA@PVdF-HFP/Al2O3 gel electrolyte show good electrochemical performances, especially the long cycle stability with the capacity retention of 96.6% after 600 cycles under 1C.

Oxygen Generating Polymeric Nano Fibers That Stimulate Angiogenesis and Show Efficient Wound Healing in a Diabetic Wound Model.

INTRODUCTION: Diabetic wounds are challenging to treat due to a wide range of pathophysiological changes. Hypoxia is one of the predominant contributing factors of poor vascularization and chronicity in diabetic wounds. This study was designed to develop polycaprolactone (PCL)-based oxygen-releasing electrospun wound dressings and evaluate their efficacy for improved full thickness wound healing in diabetic rats. METHODS: PCL-based oxygen releasing wound dressings were made using electrospinning technology. The developed dressings were characterized in terms of physical as well as biological properties both in vitro and in vivo. E-spun nanofibrous dressings were physically characterized with scanning electron microscopy, Fourier-transform infrared spectroscopy, and Energy-dispersive X-ray spectroscopy. To study the likely impact of the fabricated wound dressings in hypoxic conditions, HIF-1α expression analysis was carried out both at gene and protein levels. Wound dressings were further evaluated for their healing potential for extensive wounds in diabetic rat models. RESULTS: The experimental results showed that the developed dressings were capable of continuously generating oxygen for up to 10 days. Cell studies further confirmed pronounced expression of HIF-1α at gene and protein levels in cells seeded on PCL-sodium percarbonate (SPC) and PCL scaffolds compared with the cells cultured on a tissue culture plate. Chorioallantoic membrane assay revealed the supportive role of oxygen releasing dressings on angiogenesis compared to the control group. Histological assessment of the regenerated skin tissues proved that full thickness wounds covered with SPC loaded PCL dressings had a comparatively better vascularized and compact extracellular matrix with completely covered thick epithelium. DISCUSSION: The developed oxygen generating polymeric nanofibrous wound dressings could potentially be used as an envisioned approach for the efficient recovery of chronic diabetic wounds.

Ion desorption efficiency and internal energy transfer in polymeric electrospun nanofiber-based surface-assisted laser desorption/ionization mass spectrometry.

The understanding of the desorption mechanism in surface-assisted laser desorption/ionization (SALDI) remains incomplete because there are numerous types of SALDI materials with a broad range of physical and chemical properties, many of which impact the ultimate analytical performance in terms of signal generation. In this study, the chemical thermometer molecule, benzylpyridinium chloride, is applied to investigate the desorption process of SALDI using electrospun nanofibrous polymer and polymer composite substrates. The ion desorption efficiency was inversely related to the ion internal energy, which could not be fully explained by a thermal desorption mechanism. A competing non-thermal desorption (i.e., phase transition/explosion) was proposed to be involved in this SALDI process. The influence of the orientation and dimension of the nanofiber structure revealed that a cross-linked nanofiber network with a small diameter favored the nanofiber-assisted LDI to provide efficient ion desorption. Graphical abstract.

Current progress in application of polymeric nanofibers to tissue engineering.

Tissue engineering uses a combination of cell biology, chemistry, and biomaterials to fabricate three dimensional (3D) tissues that mimic the architecture of extracellular matrix (ECM) comprising diverse interwoven nanofibrous structure. Among several methods for producing nanofibrous scaffolds, electrospinning has gained intense interest because it can make nanofibers with a porous structure and high specific surface area. The processing and solution parameters of electrospinning can considerably affect the assembly and structural morphology of the fabricated nanofibers. Electrospun nanofibers can be made from natural or synthetic polymers and blending them is a straightforward way to tune the functionality of the nanofibers. Furthermore, the electrospun nanofibers can be functionalized with various surface modification strategies. In this review, we highlight the latest achievements in fabricating electrospun nanofibers and describe various ways to modify the surface and structure of scaffolds to promote their functionality. We also summarize the application of advanced polymeric nanofibrous scaffolds in the regeneration of human bone, cartilage, vascular tissues, and tendons/ligaments.

Amphotericin B-Loaded Poly(lactic-co-glycolic acid) Nanofibers: An Alternative Therapy Scheme for Local Treatment of Vulvovaginal Candidiasis.

Vulvovaginal candidiasis is an inflammation localized in the vulvovaginal area. It is mostly caused by Candida albicans. Its treatment is based on the systemic and local administration of antifungal drugs. However, this conventional therapy can fail owing to the resistance of the Candida species and noncompliance of patients. Amphotericin B-loaded poly(lactic-co-glycolic acid) nanofibers are single-use, antifungal, controlled drug delivery systems, and represent an alternative therapeutic scheme for the local treatment of vulvovaginal candidiasis. Nanofibers were characterized by analytical techniques and with an in vitro drug delivery study. In vitro and in vivo fungicidal activity of amphotericin B released from nanofibers was evaluated using the agar diffusion method and an experimental murine model of vulvovaginal candidiasis, respectively. Analytical techniques showed that amphotericin B was physically mixed in the polymeric nanofibers. Nanofibers controlled the delivery of therapeutic doses of amphotericin B for 8 consecutive days, providing effective in vitro antifungal activity and eliminated the in vivo vaginal fungal burden after 3 days of treatment and with only one local application. Amphotericin B-loaded poly(lactic-co-glycolic acid) nanofibers could be potentially applied as an alternative strategy for the local treatment of vulvovaginal candidiasis without inducing fungal resistance, yet ensuring patient compliance.

Electrostatic Assembly of Platinum Nanoparticles along Electrospun Polymeric Nanofibers for High Performance Electrochemical Sensors.

A novel polyacrylonitrile (PAN) nanofibrous membrane conjugated with platinum nanoparticles (PtNPs) was fabricated by electrospinning and electrostatic assembly techniques. In this procedure, PAN was electrospun with 3-aminopropyltriethoxysilane (APS) together as precursor materials. First, amine groups were introduced onto PAN nanofibers, and then the as-prepared negative-charged platinum nanoparticles (PtNPs) were conjugated onto the surface of the amino-modified PAN nanofibers uniformly by the electrostatic interaction-mediated assembly. The fabricated PAN-PtNPs hybrid nanofibrous membrane was further utilized to modify the glassy carbon electrodes and was used for the fabrication of a non-enzymatic amperometric sensor to detect hydrogen peroxide (H2O2). The electrochemical results indicated that, due to the uniform dispersion of PtNPs and the electrostatic interaction between amine groups and PtNPs, the fabricated PAN-PtNPs nanofibrous membrane-based electrochemical sensor showed excellent electrocatalytic activity toward H2O2, and the chronoamperometry measurements illustrated that the fabricated sensor had a high sensitivity for detecting H2O2. It is anticipated that the strategies used in this work will not only guide the design and fabrication of functional polymeric nanofiber-based biomaterials and nanodevices, but also extend their potential applications in energy storage, cytology, and tissue engineering.

Engineering a Piperine Eluting Nanofibrous Patch for Cancer Treatment.

The objective of this study was to engineer a biodegradable polymeric system for sustained release of piperine for cancer treatment. We prepared nanofibrous patches of poly(ε-caprolactone) (PCL) and gelatin (GEL) blends of different ratios by electrospinning. The PCL/GEL nanofibers were loaded with up to 30 wt % piperine, a phytochemical derived from black pepper, which is believed to exhibit anticancer, antiarthritis, antibacterial, antioxidant, and anti-inflammatory properties. Scanning electron microscopy revealed that the fiber diameter was in the range of 300-400 nm. Fourier-transform infrared spectroscopy confirmed that the drug was successfully loaded into the nanofiber mats. In vitro release kinetics revealed the sustained release of the drug with 50% release in 3 days from the PCL/GEL (50:50 by weight) blend fibers. The reduced viability and growth of HeLa and MCF-7 cancer cells on the piperine eluting nanofibers demonstrated anticancer activity in vitro. The proliferation of noncancerous cells such as NIH3T3 cells and human mesenchymal stem cells was affected to a markedly lesser extent. Flow cytometry revealed that the released piperine induced the generation of reactive oxygen species (ROS) and cell cycle arrest in the G2/M phase, leading to cell death of cancer cells. The findings of this study suggest that piperine-loaded nanofiber mats could be developed into implantable biodegradable patches for use in postsurgical cancer treatment.

Electrospun nanofibers of polyCD/PMAA polymers and their potential application as drug delivery system.

Herein, we used an electrospinning process to develop highly efficacious and hydrophobic coaxial nanofibers based on poly-cyclodextrin (polyCD) associated with poly(methacrylic acid) (PMAA) that combines polymeric and supramolecular features for modulating the release of the hydrophilic drug, propranolol hydrochloride (PROP). For this purpose, polyCD was synthesized and characterized, and its biocompatibility was assessed using fibroblast cytotoxicity tests. Moreover, the interactions between the guest PROP molecule and both polyCD and ßCD were found to be spontaneous. Subsequently, PROP was encapsulated in uniaxial and coaxial polyCD/PMAA nanofibers. A lower PROP burst effect (reduction of approximately 50%) and higher modulation were observed from the coaxial than from the uniaxial fibers. Thus, the coaxial nanofibers could potentially be a useful strategy for developing a controlled release system for hydrophilic molecules.

Electrospun nanofibers as a potential controlled-release solid dispersion system for poorly water-soluble drugs.

Electrospinning was introduced as a novel technique for preparing controlled-release (CR) amorphous solid dispersions (SD) and polymeric nanofibers of a poorly water-soluble drug. Piroxicam (PRX) was used as a low-dose poorly-soluble drug and hydroxypropyl methylcellulose (HPMC) as an amorphous-state stabilising carrier polymer in nanofibers. Raman spectroscopy, X-ray powder diffraction (XPRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) were used in the physical characterisation of the CR-SD nanofibers. Special attention was paid on the effects of a polymer and solvent system on the solid-state properties and physical stability of nanofibers. The average dry diameter of the electrospun CR-SD nanofibers ranged from 400 to 600 nm (SEM). PRX existed in amorphous form in the nanofibers immediately after fabrication and after a short-term (3-month) aging at low temperature (6-8 °C/0% RH) and ambient room temperature (22 °C/0% RH). At higher temperature and humidity (30 °C/85% RH), however, amorphous PRX in the nanofibers tended to slowly recrystallise to PRX form III. The electrospun CR-SD nanofibers exhibited a short lag-time, the absence of initial burst release and zero-order linear CR dissolution kinetics. In conclusion, electrospinning can be used to fabricate supersaturating CR-SD nanofibers of PRX and HPMC, and to stabilise the amorphous state of PRX.

Nanofibrous adhesion: the twin of gecko adhesion.

Inspired by dusty spider dragline silk, we studied the adhesive interaction between artificial nanofibers and their aerosol surroundings. The nanofibers are found to be able to actively capture particulate matters from the environment, exactly as the spider dragline silk does. Examinations prove that such nanofibrous adhesion is insensitive to the chemical nature of the fibers and the physical states of the particulate matter and depends only on the fiber diameters. Such facts indicate that nanofibrous adhesion is a case of dry adhesion, mainly governed by van der Waals force, sharing the same mechanism to gecko adhesion. Nanofibrous adhesion is of great importance and has promising potential. For instance, in this work, nanofibers are fabricated into a thin and translucent filter, which has a filtration performance, as high as 95%, that easily outperformed ordinary ones. We believe that this adhesive property of nanofibers will open up broader applications in both scientific and industrial fields.