Biodegradation of four polyolefin plastics in superworms (Larvae of Zophobas atratus) and effects on the gut microbiome.

Recent studies have demonstrated superworms (larvae of Zophobas atratus) ability to degrade polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), and polypropylene (PP) within their digestive system. This study aimed to compare the ability of superworms to degrade the above four polyolefin plastics over a duration of 30 days. In this study, the degradation rate of PE was the highest, and the final average weight of superworms, as well as the final plastic mass loss consumed by them, significantly increased (73.38 % and 52.33 %, respectively) when PE was fed with wheat bran (1:1 [w/w]). FTIR and TGA indicated the occurrence of oxidation and biodegradation processes in the four polyolefin plastics when exposed to superworms. In addition, the molecular weights (Mw and Mn) of excreted polymer residues decreased by 3.1 % and 2.87 % in PE-fed superworms, suggesting that the depolymerization of PE was not entirely dependent on the gut microbial community. The analysis of the gut microbial communities revealed that the dominant microbial community were different for each type of plastic. The results indicate that the gut microbiome of superworms exhibited remarkable adaptability in degrading various types of plastics, and the intake preferences and efficiency of different plastics are associated with different dominant microbial community species.

[Advances in biodegradation of polyolefin plastics].

Polyolefin plastics are a group of polymers with C-C backbone that have been widely used in various areas of daily life. Due to their stable chemical properties and poor biodegradability, polyolefin plastic waste continues to accumulate worldwide, causing serious environmental pollution and ecological crises. In recent years, biological degradation of polyolefin plastics has attracted considerable attention. The abundant microbial resources in the nature offer the possibility of biodegradation of polyolefin plastic waste, and microorganisms capable of degrading polyolefin have been reported. This review summarizes the research progress on the biodegradation microbial resources and the biodegradation mechanisms of polyolefin plastics, presents the current challenges in the biodegradation of polyolefin plastics, and provides an outlook on future research directions.

Co-combustion, life-cycle circularity, and artificial intelligence-based multi-objective optimization of two plastics and textile dyeing sludge.

Given the globally abundant availability of waste plastics and the negative environmental impacts of textile dyeing sludge (TDS), their co-combustion can effectively enhance the circular economies, energy recovery, and environmental pollution control. The (co-)combustion performances, gas emissions, and ashes of TDS and two plastics of polypropylene (PP) and polyethylene (PE) were quantified and characterized. The increased blend ratio of PP and PE improved the ignition, burnout, and comprehensive combustion indices. The two plastics interacted with TDS significantly in the range of 200-600 â„ƒ. TDS pre-ignited the combustion of the plastics which in turn promoted the combustion of TDS. The co-combustions released more CO2 but less CH4, C-H, and CO as CO2 was less persistent than the others in the atmosphere. The Ca-based minerals in the plastics enhanced S-fixation and reduced SO2 emission. The activation energy of the co-combustion fell from 126.78 to 111.85 kJ/mol and 133.71-79.91 kJ/mol when the PE and PP additions rose from 10% to 50%, respectively. The co-combustion reaction mechanism was best described by the model of f(α) = (1-α)n. The reaction order was reduced with the additions of the plastics. The co-combustion operation interactions were optimized via an artificial neural network so as to jointly meet the multiple objectives of maximum energy production and minimum emissions.

Co-pyrolysis performances, synergistic mechanisms, and products of textile dyeing sludge and medical plastic wastes.

This study aimed to quantify the co-pyrolysis of textile dyeing sludge (TDS) and the two medical plastic wastes of syringes (SY) and medical bottles (MB) in terms of their performances, synergistic mechanisms, and products. The pyrolysis of polyolefin plastics with its high calorific value and low ash content can offset the poor mono-pyrolytic performance of TDS. The synergistic mechanisms occurred mainly in the range of 400-550 °C. The addition of 10% SY or MB achieved the best co-pyrolysis performance with the lowest activation energy. The co-pyrolysis increased the contents of CH4 and CH but reduced CO2 emission. The co-pyrolysis released more fatty hydrocarbons, alcohols, and cyclic hydrocarbon during but reduced the yields of ethers and furans, through the synergistic mechanisms. The addition of the polyolefin plastics made the micro surface particles of chars smaller and looser. Our results can benefit energy utilization, pollution control, and optimal operational conditions for the industrial thermochemical conversions of hazardous wastes.