RESUMO
The objective of this study was to assess the potential for recovering precious metals from technological solutions using an ion-exchange dynamic method. Precious metals like platinum, palladium, rhodium, and gold are essential materials in various industries such as: automotive, electronics, pharmaceuticals, and jewellery. Due to their limited occurrence in primary sources, there is a growing trend in the market to extract these metals from secondary sources. The research involved conducting sorption and elution tests under different parameters to investigate their impact on the process in dynamic conditions. Additionally, an attempt was made to calculate the operational and total capacity of the resins, which has not been done previously for industrial solutions. The results showed that using Puromet MTS9200, Puromet MTS9850, and Lewatit MonoPlus MP600 resins, the sorption process could be effectively carried out in dynamic conditions with a contact time of 5 min between the technological solution and the resin bed. For optimal elution, the contact time between the eluent solution and the bed should range between 10 and 30 min. To improve rhodium sorption efficiency, it was found that neutralizing the technological solution to a pH of approximately 7 and using Lewatit MonoPlus MP600 resin could be beneficial.
RESUMO
The recovery of precious metals (PMs) from secondary resources has garnered significant attention due to environmental and economic considerations. Covalent organic frameworks (COFs) have emerged as promising adsorbents for this purpose, owing to their tunable pore size, facile functionalization, exceptional chemical stability, and large specific surface area. This review provides an overview of the latest research progress in utilizing COFs to recover PMs. Firstly, the design and synthesis strategies of chemically stable COF-based materials, including pristine COFs, functionalized COFs, and COF-based composites, are delineated. Furthermore, the application of COFs in the recovery of gold, silver, and platinum group elements is delved into, emphasizing their high adsorption capacity and selectivity as well as recycling ability. Additionally, various interaction mechanisms between COFs and PM ions are analyzed. Finally, the current challenges faced by COFs in the field of PM recovery are discussed, and potential directions for future development are proposed, including enhancing the recyclability and reusability of COF materials and realizing the high recovery of PMs from actual acidic wastewater. With the targeted development of COF-based materials, the recovery of PMs can be realized more economically and efficiently in the future.
RESUMO
The recovery of metals from waste material has been on the increase in the past few years due to a number of reasons such as supporting the diversification of metal supply resources. In addition, the alternative use of the waste material for metal recovery can add to the main production line, boosting production throughput and profitability thus, allowing companies to sustain their activities during times of low commodity prices. While there has been a lot of research and interest in the recovery of precious metals such as platinum group metals (PGMs), Au, and Ag from solid waste material, there has been limited focus on the recovery of these value metals from wastewater. This is mostly related to challenges associated with finding cost-effective technologies that can recover these metals from solutions of low metal concentrations. In recent years, bio-based technologies have, however, become established as potential alternatives to traditional techniques in the treatment of wastewater due to their ability to recover metals from solutions of low concentrations. While wastewater might be characterized by some significant value metal content, it also contains other components that have potential economic value if recovered or converted to by-products. Such an approach may not only provide an opportunity for extraction of metal resources from wastewater but also contributes toward the circular economy. This chapter presents insights into precious metal recovery from wastewater using bio-based technologies, compares such an approach to the traditional techniques, explores the recovery of other value-added products and finally considers some of the challenges associated with the large-scale application of the bio-based technologies.
RESUMO
Global healthcare based on the Internet of Things system is rapidly transforming to measure precise physiological body parameters without visiting hospitals at remote patients and associated symptoms monitoring. 2D materials and the prevailing mood of current ever-expanding MXene-based sensing devices motivate to introduce first the novel iridium (Ir) precious metal incorporated vanadium (V)-MXene via industrially favored emerging atomic layer deposition (ALD) techniques. The current work contributes a precise control and delicate balance of Ir single atomic forms or clusters on the V-MXene to constitute a unique precious metal-MXene embedded heterostructure (Ir-ALD@V-MXene) in practical real-time sensing healthcare applications to thermography with human-machine interface for the first time. Ir-ALD@V-MXene delivers an ultrahigh durability and sensing performance of 2.4% °C-1 than pristine V-MXene (0.42% °C-1), outperforming several conventionally used MXenes, graphene, underscoring the importance of the Ir-ALD innovative process. Aberration-corrected advanced ultra-high-resolution transmission/scanning transmission electron microscopy confirms the presence of Ir atomic clusters on well-aligned 2D-layered V-MXene structure and their advanced heterostructure formation (Ir-ALD@V-MXene), enhanced sensing mechanism is investigated using density functional theory (DFT) computations. A rational design empowering the Ir-ALD process on least explored V-MXene can potentially unfold further precious metals ALD-process developments for next-generation wearable personal healthcare devices.
RESUMO
Printed circuit boards (PCBs) are the most complex and valuable component of electronic devices, but only 34% of them are recycled in an environmentally sound manner. Improving the recycling rate and efficiency requires a fast, reliable and uncostly analytical method. Although the X-ray fluorescence (XRF) shows high potential, it is often unreliable. In this study, we propose a novel XRF methodology for the elemental analysis of PCBs, using the certified reference material (CRM) to decrease uncertainty and enhance accuracy. The results show significant improvement in robustness and accuracy of portable XRF(pXRF) analyses for elements Cu, Pb, Ni, As and Au, with a relative average inaccuracy of approximately 5% compared to referenced values. The methodology validation carried out by comparing pXRF and inductively coupled plasma mass spectroscopy analyses of personal computer motherboard samples shows no statistically significant difference for elements Cu, Cr and Ag. The study shows that the calibration of pXRF by CRMs enables the necessary analysis of PCBs in an efficient and reliable manner and could be also be applied to different types of PCBs and other electronic components, batteries or contaminated soil samples.
RESUMO
Waste electrical and electronic equipment (WEEE) is defined as "urban mines" due to the various recoverable minerals they contain. However, current WEEE classification methods are mostly limited to their physical characteristics, focusing on collection, transport, and treatment purposes rather than on valorization. In the present study, our aim is to propose an alternative classification approach adapted for low-income countries for WEEE recovery that highlights their content of precious and valuable metals. A typology of WEEE was created based on WEEE generated in Ouagadougou (Burkina Faso). Principal component analysis (PCA) and the moving center technique (K-means) were used for the classification method. Ultimately, we have found that to improve the recovery of WEEE, they can be classified into three main groups: (i) a group of WEEE-containing batteries, (ii) a group of WEEE-containing valuable and precious metals, and finally, (iii) a group of WEEE made up of cathode ray tube televisions (CRT-TV) waste. The WEEE belonging to the second group are the ones that could generate higher economical values. This alternative classification approach will help investors and operators to better orient their valorization activities towards WEEE types that present the best precious metals recovery potential, maximizing their profits. On the other hand, decision-makers will find this classification useful for reorganizing the WEEE value chain.
Assuntos
Resíduo Eletrônico , Burkina Faso , ReciclagemRESUMO
The mitigation of environmental and energy crises could be advanced by reclaiming platinum group precious metals (PGMs) from decommissioned air purification catalysts. However, the complexity of catalyst composition and the high chemical inertness of PGMs significantly impede this process. Consequently, recovering PGMs from used industrial catalysts is crucial and challenging. This study delves into an environmentally friendly approach to selectively recover PGMs from commercial air purifiers using photocatalytic redox technology. Our investigation focuses on devising a comprehensive strategy for treating three-way catalysts employed in automotive exhaust treatment. By meticulously pretreating and modifying reaction conditions, we achieved noteworthy results, completely dissolving and separating rhodium (Rh), palladium (Pd), and platinum (Pt) within a 12-h time frame. Importantly, the solubility selectivity persists despite the remarkably similar physicochemical properties of Rh, Pd, and Pt. To bolster the environmental sustainability of our method, we harness sunlight as the energy source to activate the photocatalysts, facilitating the complete dissolution of precious metals under natural light irradiation. This eco-friendly recovery approach demonstrated on commercial air purifiers, exhibits promise for broader application to a diverse range of deactivated air purification catalysts, potentially enabling implementation on a large scale.
RESUMO
The resource recovery and reuse of precious metal-laden wastewater is widely recognized as crucial for sustainable development. Superalloy electrolytes, produced through the electrolysis of superalloy scrap, contain significant quantities of precious metal ions, thereby possessing substantial potential for recovery value. This study first explores the feasibility of utilizing fungi to treat Superalloy electrolytes. Five fungi resistant to high concentrations of heavy metals in electrolytes (mainly containing Co, Cr, Mo, Re, and Ni) were screened from the soil of a mining area to evaluate their adsorption characteristics. All five fungi were identified by ITS sequencing, and among them, Paecilomyces lilacinus showed the best adsorption performance for the five heavy metals; therefore, we conducted further research on its adsorption characteristics. The best adsorption effect of Co, Cr, Mo, Re, and Ni was 37.09, 64.41, 47.87, 41.59, and 25.38%, respectively, under the conditions of pH 5, time 1 h, dosage 26.67 g/L, temperature 25-30°C, and an initial metal concentration that was diluted fivefold in the electrolyte. The biosorption of Co, Mo, Re, and Ni was better matched by the Langmuir model than by the Freundlich model, while Cr displayed the opposite pattern, showing that the adsorption process of P. lilacinus for the five heavy metals is not a single adsorption mechanism, but may involve a multi-step adsorption process. The kinetics study showed that the quasi-second-order model fitted better than the quasi-first-order model, indicating that chemical adsorption was the main adsorption process of the five heavy metals in P. lilacinus. Fourier transform infrared spectroscopy revealed that the relevant active groups, i.e., hydroxyl (-OH), amino (-NH2), amide (- CONH2), carbonyl (-C = O), carboxyl (-COOH), and phosphate (PO43-), participated in the adsorption process. This study emphasized the potential application of P. lilacinus in the treatment of industrial wastewater with extremely complex background values.
RESUMO
The presence of valuable and hazardous metals in waste printed circuit boards, especially, motherboards, makes their recovery necessary as implies great economic and environmental advantages and develops urban mining processes. Hence, this research is focused on the selective leaching of Cu, Pb, and Sn as base metals using nitric acid and hydrochloric acid and Au, Ag, and Pd as precious metals using thiourea and sodium thiosulfate from waste motherboards' PCBs in a sequential eco-friendly two-stage process. Previously, thiourea and sodium thiosulfate were used as leaching agents to investigate their applicability for the leaching of metals from PCBs in a single-stage process. Screening experimental design was applied to screen the variables affecting the leaching process in order to evaluate their impact on the recovery of metals and select the significant factors. The results demonstrated that base and precious metals can be leached appropriately in two consecutive stages compared to a single-stage process. Nitric acid was found to be a much more efficient agent to leach Cu and Pb in comparison with hydrochloric acid which was more suitable for the leaching of Sn. In the case of precious metals, higher amounts of Au were leached using thiourea, whereas sodium thiosulfate was able to leach more Pd. Roughly similar results were obtained for the leaching of Ag using these leaching agents. Nitric acid concentration, average particle size, temperature, and leaching time were found to be significant to maximize the leaching of Cu and Pb and minimize that for Au, Ag, and Pd in the first stage. Initial pH was the only variable influencing the second stage, in particular, Au leaching by thiourea.
RESUMO
Mining wastewater can have adverse effects on the ecosystem; thus, treatment before discharging into the environment is of utmost importance. This manuscript reports on the effect of mining wastewater on the environment. Moreover, the currently used, effective and commercialised mine wastewater treatment technologies such as SAVMIN®, SPARRO®, Biogenic sulphide, and DESALX® are reported in this study. These technologies integrate two or more separation processes, which have been proven to be effective for the high recovery of salts and water for reuse. Some of the technologies reported can significantly recover salts and >95% of water. Modern pilot-stage and laboratory-scale treatment systems used for the recovery and removal of metals are also reported herein. Since some treatment technologies can generate highly toxic sludge and other waste products, the management of the generated waste was also considered. Some studies have focused on the treatment of wastewater at the laboratory level using the adsorption process. Most adsorbents exhibit promising results; however, there is insufficient research on reusability, toxic sludge management, and the economic analysis of the systems. Moreover, the implementation of adsorption systems in wastewater is necessary. Furthermore, the integration of treatment systems to recover precious metals at low concentrations is desirable in addition to water reclamation to achieve circular mine water.
RESUMO
The extraction of rare earth elements (REEs) and noble metals (NMs) from unconventional resources is playing a crucial role under the context of industrialization and reserve depletions. Plants used for phytoextraction are promising materials for the recovery of metals, but the biomass needs to be reduced to a manageable amount and volume prior to the extraction process. This paper investigates the combustion process of biomass focusing on NMs and REEs flow. The plants harvested from a brownfield land were pelletized and incinerated in a fixed-grate pilot-scale boiler, meanwhile, solid remains from various points in the combustion and flue gas system were captured and analyzed. The results show that levels of NMs in deposited ash and fly ash are greater than in bottom ash. Meanwhile, the higher REE concentration in bottom ash compared to that in other solid residuals demonstrates the less ability of these compounds to escape from the combustion chamber. Generally, the concentrations of REEs and NMs in the solid residues are significantly higher compared to biomass. SEM-EDS analyses of the contaminated solid remains indicate that gold forms individual particles with purity higher than 95 wt% in the bottom ashes, and this finding adds novel insights into gold phytomining.
RESUMO
The recovery of palladium from spent auto-exhaust catalysts (SAE-catalysts) is of great significance for resource sustainability. Herein, we proposed an efficient closed-loop leaching and recovery method for palladium from SAE-catalysts using iodotrihalide ionic liquids (ILs). Recovery design was explored aimed at green leaching and process simplification. Iodotrihalide ILs exhibited exceptional performance in terms of leaching efficiency (99.1%), selectivity (selectivity > 6.8 ×103) and reusability (over 6 cycles). The mechanism study revealed that excellent leaching performance was attributed to the redox and complexation. Additionally, the chemical reaction-controlled model was best suited to describe the leaching process. Notably, under the optimal conditions determined by the response surface methodology, a high-purity Pd(II) solution (purity > 99.8%) was obtained. More significantly, it was ideal for practical applications due to the low-viscosity (36.0 cP), mild (55 °C) and one-step leaching and recovery. In conclusion, this work provides an eco-friendly method for recovering palladium from SAE-catalysts with its non-high corrosiveness and low environmental impact.
RESUMO
In this study, multilayer self-assembled multifunctional bamboo shoot shell biochar microspheres (BSSBM) were prepared, in which bamboo shoot shell biochar was used as the carrier, titanium dioxide as the intermediate medium, and chitosan as the adhesion layer. The adsorption behavior of BSSBM on heavy metals Ag(I) and Pd(II), antibiotics, and dye wastewater was systematically analyzed. BSSBM shows a wide range of adsorption capacity. BSSBM is a promising candidate for the purification of real polluted water, not only for metal ions, but also for Tetracycline (TC) and Methylene Blue (MB). The maximum adsorption amounts of BSSBM on Pd(II), Ag(I), TC and MB were 417.3 mg/g, 222.5 mg/g, 97.2 mg/g and 42.9 mg/g, respectively.The adsorption of BSSBM on Pd(II), MB and TC conformed to the quasi-first kinetic model, and the adsorption on Ag(I) conformed to the quasi-second kinetic model. BSSBM showed remarkable selective adsorption capacity for Ag(I) and Pd(II) in a multi-ion coexistence system. BSSBM not only realized the high value-added utilization of waste, but also had the advantages of low cost, renewable and selective adsorption. BSSBM demonstrated its potential as a new generation of multifunctional adsorbent, contributing to the recovery of rare/precious metals and the treatment of multi-polluted water.
Assuntos
Microesferas , Poluentes Químicos da Água , Purificação da Água , Adsorção , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Carvão Vegetal/química , Metais Pesados/química , Metais Pesados/análise , Brotos de Planta/química , Cinética , Quitosana/química , Bambusa/química , Águas Residuárias/química , Antibacterianos/químicaRESUMO
The recycling of electronic waste, i.e., waste Printed Circuit Boards (WPCBs), provides substantial environmental and economic advantages. In fact, the concentration of valuable precious and base metals in WPCBs is even higher compared to those found in mined ores. Nevertheless, it is still challenging to selectively extract precious metals with low concentrations from the pregnant leaching solution, due to the co-deposition of base metals, like Cu, which have higher concentrations. In this research, stepwise recovery of precious metals and copper directly from WPCBs thiosulfate leaching solution was facilitated by the Ti cathode coated with MoS2 (MoS2/Ti). The in-situ enrichment of Au(S2O3)23- and Ag(S2O3)23- at the surface of MoS2 enables the high efficiency and selectivity of electrodeposition, which has been confirmed through COMSOL Multiphysics simulations and visualization. As a result, the first-step electrodeposition at 0.6 V recovered 92.44 % Au and 98.18 % Ag without any co-deposition of Cu. Subsequently, the second-step recovery employed a constant current of 0.03 A, achieving 100 % recovery of copper within 12 h. Furthermore, this study optimized the reduction potential, NH3·H2O concentration, and S2O32- concentration for the stepwise electrodeposition process. These findings provide valuable insights for establishing a closed loop circular economy in the electronics industry.
RESUMO
High-chloride leachate is a solution rich in precious metals that is produced in chloride hydrometallurgy. It has high levels of both rare and precious metals and hazardous chloride ions, and resource recovery from this solution and its safe disposal have become key objectives in the field of hydrometallurgy. In this study, a sustainable process involving "ultrasound-assisted precipitation-Pb powder cementation" was proposed for the stepwise separation and high-value utilization of Bi, Au and Ag obtained from high-chloride leachate. Targeted separation and conversion of Bi were achieved by precipitation-re-acid hydrolysis-ultrasonication-assisted coprecipitation-centrifugal purification. Under the optimal process conditions, the removal rate of Bi reached 99.52%, while the loss rates of Au and Ag were only 4.63% and 8.72%, respectively. Single-factor experiments of Au and Ag cementation by Pb powder showed that the recovery rates of precious metals could be improved by increasing the temperature, raising the solution pH, and applying mechanical force and ultrasonication. A possible reaction mechanism for Au and Ag cementation with Pb powder was proposed based on macroscopic kinetic analysis and microscopic mineral characterization. This work provides technical support and a theoretical basis for the separation and enrichment of rare and precious metals in chloride hydrometallurgy.
RESUMO
Precious metals are used in many branches of industries. Due to their rarity and diminishing natural resources, more and more new methods are being sought to recover them from secondary sources, which can be electronic waste or spent car exhaust converters. This paper presents the research on the recovery of precious metals from chloride solutions using the Aliquat 336-impregnated Lewatit VP OC 1026 sorbent. The study used a warm impregnation method without toxic solvents, which is beneficial for the environment. The maximal sorption capacities obtained for model solutions in 0.1â M HCl were: 95.6â mg/g for gold, 38.2â mg/g for palladium, and 36.2â mg/g for platinum. There were studied: kinetics and thermodynamics of sorption, as well as amounts of the sorbent, effects of phase contact time and HCl concentration on the sorption of precious metals. Positive values of enthalpy change ΔH° validate that the process is endothermic. The research was also carried out on a real leaching solution obtained by digesting a spent catalytic converter, containing small amounts of platinum group metals. Desorption of precious metal ions was conducted using 1â M thiourea in 1â M hydrochloric acid. The obtained impregnated sorbent proved to be effective for sorption of Au(III), Pd(II), Pt(IV) ions.
RESUMO
Fluorescent nanomaterials (NMs) are widely used in imaging techniques in biomedical research. Especially in bioimaging systems, with the rapid development of imaging nanotechnology, precious metal clusters such as Au, Ag, and Cu NMs have emerged with different functional agents for biomedical applications. Compared with traditional fluorescent molecules, precious metal clusters have the advantages of high optical stability, easy regulation of shape and size, and multifunctionalization. In addition, NMs possess strong photoluminescent properties with good photostability, high release rate, and sub-nanometer size. They could be treated as fundamental agents in bioimaging usability. This review summarizes the recent advances in bioimaging utilization, it conveys that metal clusters refer to Au, Ag, and Cu fluorescent clusters and could provide a generalized overview of their full applications. It includes optical property measurement, precious metal clusters in bioimaging systems, and a rare earth element-doped heterogeneous structure illustrated in biomedical imaging with specific examples, that provide new and innovative ideas for fluorescent NMs in the field of bioimaging usability.
RESUMO
Trading in commodities such as precious metals and crude oil is vital to the economy. Frequent exchange rate fluctuations have led to constant changes in commodity prices since 2000. Using quantile regression, this paper examines the impact of oil prices and the US dollar exchange rate on gold, silver, platinum, and palladium from January 1, 2013 to 5 May 2023. Oil prices positively affect precious metals returns, and positive and negative oil price shocks are asymmetric. Exchange rate movements negatively affect precious metal returns. In addition, gaps in the existing literature are filled by analyzing the effects of oil prices and the exchange rate on precious metals before and during COVID-19. This paper provides substantial evidence for revising the impact of the crisis.
RESUMO
Palladium (Pd) is widely used in catalyst, aerospace, and medical applications, but only 1% of its reserves are found in nature. So, the recovery of Pd(II) is very important. Natural fibers are a good adsorption material, and the abundant functional groups in bamboo shoot shell (BSS) fibers can form interactions with metal particles. However, few studies on Pd(II) adsorption using BSS fibers exist. In the present work, waste bamboo shoot shells were doped with titanium dioxide (TiO2) particles, and the surface activation of BSS-TiO2@CA by citric acid (CA) was carried out to prepare an efficient and recyclable adsorbent BSS-TiO2@CA for the adsorption of Pd(II). The adsorption performance, adsorption mechanism, and regeneration performance of BSS-TiO2@CA on Pd(II) were systematically analyzed by continuous adsorption experiments, characterization, and response surface method. It was found that the surface-activated waste bamboo shoot shells had an outstanding adsorption capacity of Pd(II), and the maximum adsorption rate of BSS-TiO2@CA reached 85% with a maximum adsorption capacity (Qm) of 175.74 mg/g. The functionalized use of waste bamboo shoot shells provides a new idea for the development of sustainable, cost-effective, and environmentally friendly adsorbents.
Assuntos
Paládio , Poluentes Químicos da Água , Adsorção , Biomassa , TitânioRESUMO
The rapid proliferation of electronic waste (e-waste), including waste printed circuit boards (WPCBs), has exerted immense pressure on the environment. The recovery of precious metals from WPCBs not only serves as an effective means of alleviating this environmental burden but also generates economic value. This review focuses on bioleaching, an environmentally friendly method for extracting precious metals from WPCBs. Under various conditions, this method has achieved leaching rates of 30%-73% for Au and 33.8%-90% for Ag. However, there is a relative scarcity of studies on the bioleaching of precious metals from WPCBs. In this paper, we provide an overview of the current status of bioleaching for precious metals from WPCBs and describe the underlying mechanisms. We also briefly outline the influence of various process factors on leaching efficiency. While this review underscores the considerable potential of bioleaching in WPCBs applications, certain limitations hinder the engineering-scale application of the technology. Consequently, this paper describes the current enhanced processes for enhancing leaching efficiency. Overall, this review can serve as a valuable reference for future research endeavors, ultimately promoting the widespread utilization of bioleaching for the recovery of precious metals from WPCBs.