Indolo[3,2-b]indole-based multi-resonance emitters for efficient narrowband pure-green organic light-emitting diodes.

Organic light-emitting diodes (OLEDs) utilizing multi-resonance (MR) emitters show great potential in ultrahigh-definition display benefitting from superior merits of MR emitters such as high color purity and photoluminescence quantum yields. However, the scarcity of narrowband pure-green MR emitters with novel backbones and facile synthesis has limited their further development. Herein, two novel pure-green MR emitters (IDIDBN and tBuIDIDBN) are demonstrated via replacing the carbazole subunits in the bluish-green BCzBN skeleton with new polycyclic aromatic hydrocarbon (PAH) units, 5-phenyl-5,10-dihydroindolo[3,2-b]indole (IDID) and 5-(4-(tert-butyl)phenyl)-5,10-dihydroindolo[3,2-b]indole (tBuIDID), to simultaneously enlarge the π-conjugation and enhance the electron-donating strength. Consequently, a successful red shift from aquamarine to pure-green is realized for IDIDBN and tBuIDIDBN with photoluminescence maxima peaking at 529 and 532 nm, along with Commission Internationale de l'Eclairage (CIE) coordinates of (0.25, 0.71) and (0.28, 0.70). Furthermore, both emitters revealed narrowband emission with small full width at half-maximum (FWHM) below 28 nm. Notably, the narrowband pure-green emission was effectively preserved in corresponding devices, which afford elevated maximum external quantum efficiencies of 16.3% and 18.3% for IDIDBN and tBuIDIDBN.

Peripherally Heavy-Atom-Decorated Strategy Towards High-Performance Pure Green Electroluminescence with External Quantum Efficiency over 40 .

Heavy-atom integration into thermally activated delayed fluorescence (TADF) molecule could significantly promote the reverse intersystem crossing (RISC) process. However, simultaneously achieving high efficiency, small roll-off, narrowband emission and good operational lifetime remains a big challenge for the corresponding organic light-emitting diodes (OLEDs). Herein, we report a pure green multi-resonance TADF molecule BN-STO by introducing a peripheral heavy atom selenium onto the parent BN-Cz molecule. The organic light-emitting diode device based on BN-STO exhibited state-of-the-art performance with a maximum external quantum efficiency (EQE) of 40.1 %, power efficiency (PE) of 176.9 lm W-1 , well-suppressed efficiency roll-off and pure green gamut. This work reveals a feasible strategy to reach a balance between fast RISC process and narrow full width at half maximum (FWHM) of MR-TADF by heavy atom effect.

Multiple-Resonance-Induced Thermally Activated Delayed Fluorescence Materials Based on Indolo[3,2,1-jk]carbazole with an Efficient Narrowband Pure-Green Electroluminescence.

Herein, we report two multiple-resonance thermally activated delayed fluorescence emitters (VTCzBN and TCz-VTCzBN) based on indolo[3,2,1-jk]carbazole unit and boron-nitrogen skeletons, whose emissions peaking at 496 and 521 nm with full width at half maximum of 34 and 29 nm, respectively. Meanwhile, fast rate constants of reverse intersystem crossing of above 106  s-1 are obtained due to small singlet-triplet energy gaps and large spin-orbital coupling values. Notably, planar molecular structures along the transition dipole moment direction endow them with high horizontal emitting dipole ratios of up to 94 %. Consequently, the corresponding organic light-emitting diodes (OLEDs) show the maximum external quantum efficiencies of 31.7 % and 32.2 %, respectively. Particularly, OLED with TCz-VTCzBN display ultra-pure green emission with Commission Internationale de l'Eclairage coordinates of (0.22, 0.71), consistent with the green display standard of the National Television System Committee.

Development of Pure Green Thermally Activated Delayed Fluorescence Material by Cyano Substitution.

Multiple resonance (MR)-effect-induced thermally activated delayed fluorescence (TADF) materials have garnered significant attention because they can achieve both high color purity and high external quantum efficiency (EQE). However, the reported green-emitting MR-TADF materials exhibit broader emission compared to those of blue-emitting ones and suffer from severe efficiency roll-off due to insufficient rate constants of reverse intersystem crossing process (kRISC ). Herein, a pure green MR-TADF material (ν-DABNA-CN-Me) with high kRISC of 105 s-1 is reported. The key to success is introduction of cyano groups into a blue-emitting MR-TADF material (ν-DABNA), which causes remarkable bathochromic shift without a loss of color purity. The organic light-emitting diode employing it as an emitter exhibits green emission at 504 nm with a small full-width at half-maximum of 23 nm, corresponding to Commission Internationale d'Éclairage coordinates of (0.13, 0.65). The device achieves a high maximum EQE of 31.9% and successfully suppresses the efficiency roll-off at a high luminance.

Generation of Pure Green Up-Conversion Luminescence in Er3+ Doped and Yb3+-Er3+ Co-Doped YVO4 Nanomaterials under 785 and 975 nm Excitation.

Materials that generate pure, single-color emission are desirable in the development and manufacturing of modern optoelectronic devices. This work shows the possibility of generating pure, green up-conversion luminescence upon the excitation of Er3+-doped nanomaterials with a 785 nm NIR laser. The up-converting inorganic nanoluminophores YVO4: Er3+ and YVO4: Yb3+ and Er3+ were obtained using a hydrothermal method and subsequent calcination. The synthesized vanadate nanomaterials had a tetragonal structure and crystallized in the form of nearly spherical nanoparticles. Up-conversion emission spectra of the nanomaterials were measured using laser light sources with λex = 785 and 975 nm. Importantly, under the influence of the mentioned laser irradiation, the as-prepared samples exhibited bright green up-conversion luminescence that was visible to the naked eye. Depending on the dopant ions used and the selected excitation wavelengths, two (green) or three (green and red) bands originating from erbium ions appeared in the emission spectra. In this way, by changing the UC mechanisms, pure green luminescence of the material can be obtained. The proposed strategy, in combination with various single-doped UC nanomaterials activated with Er3+, might be beneficial for modern optoelectronics, such as light-emitting diodes with a rich color gamut for back-light display applications.

Solution-Processable Pure Green Thermally Activated Delayed Fluorescence Emitter Based on the Multiple Resonance Effect.

Thermally activated delayed fluorescence (TADF) materials based on the multiple resonance (MR) effect are applied in organic light-emitting diodes (OLEDs), combining high color purity and efficiency. However, they are not fabricated via solution-processing, which is an economical approach toward the mass production of OLED displays. Here, a solution-processable MR-TADF material (OAB-ABP-1), with an extended π-skeleton and bulky substituents, is designed. OAB-ABP-1 is synthesized from commercially available starting materials via a four-step process involving one-shot double borylation. OAB-ABP-1 presents attractive photophysical properties, a narrow emission band, a high photoluminescence quantum yield, a small energy gap between S1 and T1 , and low activation energy for reverse intersystem crossing. These properties are attributed to the alternating localization of the highest occupied and lowest unoccupied molecular orbitals induced by the boron, nitrogen, and oxygen atoms. Furthermore, to facilitate charge recombination, two novel semiconducting polymers with similar ionization potentials to that of OAB-ABP-1 are synthesized for use as interlayer and emissive layer materials. A solution-processed OLED device is fabricated using OAB-ABP-1 and the aforementioned polymers; it exhibits pure green electroluminescence with a small full-width at half-maximum and a high external quantum efficiency with minimum efficiency roll-off.

Achieving Pure Green Electroluminescence with CIEy of 0.69 and EQE of 28.2% from an Aza-Fused Multi-Resonance Emitter.

Pure green emitters are essential for realizing an ultrawide color gamut in next-generation displays. Herein, by fusing the difficult-to-access aza-aromatics onto B (boron)-N (nitrogen) skeleton, a hybridized multi-resonance and charge transfer (HMCT) molecule AZA-BN was successfully synthesized through an effective one-shot multiple cyclization method. AZA-BN shows pure green fluorescence with photoluminance quantum yield of 99.7 %. The corresponding green device exhibits a maximum external quantum efficiency and power efficiency of 28.2 % and 121.7 lm W-1 , respectively, with a full width half maximum (FWHM) of merely 30 nm and Commission Internationale de l'Eclairage (CIE) coordinate y of 0.69, representing the purest green bottom-emitting organic light-emitting diode.