Regioselective sulfation of alginate at 2-O-position of mannuronic acid unit with Py∙SO3 in DMSO.

Alginates are brown algal polysaccharides consisting of ß-D-mannuronic (M) and α-l-guluronic acid (G) residues linked with 1→4 glycosidic bonds. To functionalize these natural resources for biomedical use, alginates can be chemically modified, including by sulfation. Here regioselective sulfation of alginates at M-2 in DMSO with Py∙SO3 is described, by either sulfating alginates directly or through using alginates with added protecting groups (PG-s), including TBDMS-ether, Piv-, Bz-esters and intramolecular 3,6-lactone. Highest regioselectivity was found by sulfating TBDMS- and Piv-protected alginates, with over 65 % of M-residues being 2-O-sulfated. However significant reduction in molecular weight was found when alginates were sulfated in DMSO. Results from this work will allow a degree of control over substitution patterns in sulfated alginates. This will allow to more accurately determine structure-property relationships in biomedical research.

MRSA Inhibitory Activity of Some New Pyrazolo[1,5-a]pyrimidines Linked to Arene and/or Furan or Thiophene Units.

Methicillin-resistant Staphylococcus aureus (MRSA) is a major contributor to hospital-acquired infections and is highly resistant to treatment. Ongoing research focuses on developing new antimicrobial medications to prevent the spread of resistance. A facile method was employed to efficiently synthesize new pyrazolo[1,5-a]pyrimidines in 84-93% yields by reacting 4-benzyl-1H-pyrazole-3,5-diamine with the respective α,ß-unsaturated ketones. The reaction was carried out in ethanol containing 1.2 equivalents of potassium hydroxide at reflux for 5-6 h. The new products are attached to a para-substituted aryl group with variable electronic properties at pyrazolopyrimidine-C5, in addition to one of three units at C7, namely phenyl, thiophen-2-yl, or furan-2-yl units. A wide spectrum of antibacterial activity was displayed by the new pyrimidines against six different bacterial strains. In general, pyrimidines attached to furan-2-yl units at C7, in addition to another aryl unit at C5, attached to 4-Me or 4-OMe groups, demonstrate significant antibacterial activity, particularly against S. aureus strain. They had MIC/MBC of 2.5/5.1 and 2.4/4.9 µM, respectively, which exceeded that of ciprofloxacin. Moreover, they demonstrate more effective MRSA inhibitory activity than linezolid, with MIC/MBC values up to 4.9/19.7 and 2.4/19.7 µM against MRSA ATCC:33591 and ATCC:43300 strains, respectively.

Platinum-catalyzed regio- and enantioselective diboration of unactivated alkenes with (pin)B-B(dan).

Asymmetric diboration of terminal alkenes is well established, and subsequent selective functionalization of the less hindered primary boronic ester is commonly achieved. Conversely, selective functionalization of the sterically less accessible secondary boronic ester remains challenging. An alternative way to control chemoselective functionalization of bis(boron) compounds is by engendering different Lewis acidity to the two boryl moieties, since reactivity would then be dictated by Lewis acidity instead of sterics. We report herein the regio- and enantioselective Pt-catalyzed diboration of unactivated alkenes with (pin)B-B(dan). A broad range of terminal and cyclic alkenes undergo diboration to furnish the differentiable 1,2-bis(boron) compounds with high levels of regio- and enantiocontrol, giving access to a wide variety of novel building blocks from a common intermediate. The reaction places the less Lewis acidic B(dan) group at the less hindered position and the resulting 1,2-bisboryl alkanes undergo selective transformations of the B(pin) group located at the more hindered position. The regioselectivity of diboration has been studied by DFT calculations and is believed to originate from the trans influence, which lowers the activation barrier for formation of the regioisomer that places the weaker electron donor [B(pin) vs B(dan)] opposite the strong electron donor (alkyl group) in the platinum complex.

Enamine Synthesis via Regiocontrolled 6-endo-dig and 5-exo-dig Tethered Carboamination of Propargylic Alcohols.

Enamines are versatile building blocks for the synthesis of biologically active compounds. Nevertheless, only a limited number of strategies have been reported for preparing trisubstituted enamines in a regio- and stereoselective manner. Herein, we report a regiocontrolled 6-endo and 5-exo tethered carboamination of propargylic alcohols for the synthesis of trisubstituted enamines. High regioselectivity was achieved through fine-tuning of the amine protecting group during the Pd-catalyzed carboamination. The introduced trifluoromethylated tether enables further stereoselective functionalizations, such as hydrogenation and fluorination.

Acid-Promoted Self-Photocatalyzed Regioselective Oxidation: A Novel Strategy for Accessing Quinoxaline-2,3-diones.

Disclosed here is an efficient approach for the preparation of quinoxaline-2,3-diones using air (O2) as a green oxidant via acid-promoted self-photocatalyzed regioselective oxidation of quinoxalin-2(1H)-ones at C-3 position. This protocol presents a novel synthetic route for the preparation of quinoxaline-2,3-dione derivatives, featuring mild reaction conditions, simple operation, and a wide range of substrates, without the need for external photocatalysts, metal reagents, and strong oxidants.

Intramolecular Nucleophilic Vinylic Substitution (SNV) by Carbon Nucleophiles: Conformationally Directed Formation of Dienes from N,N'-Diallyl Ureas.

Nucleophilic vinylic substitution (SNV) by carbon nucleophiles allows the formation of vinylic C-C bonds without transition metal catalysts. In this paper, we show that tethering two alkenes together through a urea linkage can lead to the formation of a diene by an intramolecular SNV reaction. The starting materials are fully substituted N,N'-diallyl ureas; the reaction proceeds in the presence of base, and entails a cascade of deprotonations, reprotonations, and an SNV reaction of an allylic carbanion on a rare electrophile: a vinylic urea. As a result, two allylic substituents couple to form a diene, despite the fact that neither is activated towards electrophilic attack. The reaction is tolerant of significant steric bulk, and exhibits regioselectivity with unsymmetrical diallyl ureas: ß-substituted allyl groups invariably behave as nucleophiles, while electrophilic behavior may be enforced by the use of an E-vinylic urea substituent that cannot be deprotonated under the reaction conditions.

Site-Selective Deposition of Silica Nanoframes and Nanocages onto Faceted Gold Nanostructures Using a Primer-free Tetraethyl Orthosilicate Synthesis.

The Stöber method for forming spherical silica colloids is well-established as one of the pillars of colloidal synthesis. In a modified form, it has been extensively used to deposit both porous and protective shells over metal nanomaterials. Current best-practice techniques require that the vitreophobic surface of metal nanoparticles be primed with a surface ligand to promote silica deposition. Although such techniques have proved highly successful in forming core-shell configurations, the site-selective deposition of silica onto preselected areas of faceted metal nanostructures has proved far more challenging. Herein, a primer-free TEOS-based synthesis is demonstrated that is capable of forming architecturally complex nanoframes and nanocages on the pristine surfaces of faceted gold nanostructures. The devised synthesis overcomes vitreophobicity using elevated TEOS concentrations that trigger silica nucleation along the low-coordination sites where gold facets meet. Continued deposition sees the emergence of a well-connected frame followed by the lateral infilling of the openings formed over gold facets. With growth readily terminated at any point in this sequence, the synthesis distinguishes itself in being able to achieve patterned and tunable silica depositions expressing interfaces that are uncorrupted by primers. The so-formed structures are demonstrated as template materials capable of asserting high-level control over synthesis and assembly processes by using the deposited silica as a mask that deactivates selected areas against these processes while allowing them to proceed elsewhere. The work, hence, extends the capabilities and versatility of TEOS-based syntheses and provides pathways for forming multicomponent nanostructures and nanoassemblies with structurally engineered properties.

Bismuth(III)-Catalyzed Regioselective Selenation of Indoles with Diaryl Diselenides: Synthesis of 3-Selanylindoles.

Heterocyclic aryl selenides have recently attracted considerable research interest owing to their applications in biological and pharmaceutical fields. Herein, we describe a simple and general synthesis of 3-selanylindoles via a novel regioselective C-H selenation of indoles using a bismuth reagent as a catalyst. The reactions of indoles with diselenides in the presence of 10 mol% BiI3 at 100 °C in DMF afforded the corresponding 3-selanylindoles in moderate-to-excellent yields. The reaction proceeded efficiently under aerobic conditions by adding only a catalytic amount of BiI3, which was non-hygroscopic and less toxic, and both selanyl groups of the diselenide were transferred to the desired products.

m-Pyripentaphyrins(1.0.0.0.0): BIII Complexes and ß-ß Directly Linked Dimers.

m-Pyripentaphyrins(1.0.0.0.0) were synthesized by Suzuki-Miyaura coupling of 3,5-bis(5-borylpyrrol-2-yl)-BODIPY with 2,6-dibromopyridine. Upon treatment with PhBCl2, pyripentaphyrin 1 provided mono- and bis-BIII complexes sequentially. The Mono-BIII complex shows a distorted tetrahedral coordinated BIII with a σ-phenyl ligand on the BIII and the bis-BIII complex shows an additional distorted tetrahedral coordinated BIII with a B-H bond. Bromination of the pyripentaphyrins with N-bromosuccinimide (NBS) resulted in regioselective formation of 8-bromopyripentaphyrins, which were dimerized to 8,8'-linked dimers by reductive coupling with Ni(cod)2. While all these pyripentaphyrins are nonaromatic, they exhibit characteristic broad absorption bands at long wavelength near the NIR region, indicating the presence of effective macrocyclic conjugation.

Selective cross-metathesis of cellobiose derivatives with amido-functionalized olefinic structures: A model study for synthesis of cellulosic diblock copolymers.

This work describes a model study for synthesis of cellulose-based block copolymers, investigating selective coupling of peracetyl ß-d-cellobiose and perethyl ß-d-cellobiose at their reducing-ends by olefin cross-metathesis (CM). Herein we explore suitable pairs of ω-alkenamides that permit selective, quantitative coupling by CM. Condensation reactions of hepta-O-acetyl-ß-d-cellobiosylamine or hepta-O-ethyl-ß-d-cellobiosylamine with acyl chlorides afforded the corresponding N-(ß-d-cellobiosyl)-ω-alkenamide derivatives with an aromatic olefin or linear olefinic structures. Among the introduced olefinic structures, CM of the undec-10-enamide (Type I olefin) and the acrylamide (Type II olefin) gave the hetero-block tetramers, N-(hepta-O-ethyl-ß-d-cellobiosyl)-N'-(hepta-O-acetyl-ß-d-cellobiosyl)-alkene-α,ω-diamides, with >98 % selectivity. Moreover, selectivity was not influenced by the cellobiose substituents when a Type I olefin with a long alkyl tether was used. Although the amide carbonyl group could chelate the ruthenium atom and reduce CM selectivity, the results indicated that such chelation is suppressed by sterically hindered pyranose rings or the long alkyl chain between the amido group and the double bond. Based on this model study, selective end-to-end coupling of tri-O-ethyl cellulose and acetylated cellobiose was accomplished, proving the concept that this model study with cellobiose derivatives is a useful signpost for selective synthesis of polysaccharide-based block copolymers.

Efficient Synthesis of Mannopyranoside-based Fatty Acyl Esters: Effects of Acyl Groups on Antimicrobial Potential.

BACKGROUND: The approval of Sucrose Fatty Acid Esters (SFAEs) as food additives/ preservatives with antimicrobial potential has triggered enormous interest in discovering new biological applications. Accordingly, many researchers reported that SFAEs consist of various sugar moieties, and hydrophobic side chains are highly active against certain fungal species. OBJECTIVE: This study aimed to conduct aregioselective synthesis of SAFE and check the effect of chain length and site of acylation (i.e., C-6 vs. C-2, C-3, C-4, and long-chain vs. short-chain) on antimicrobial potency. METHODS: A direct acylation method maintaining several conditions was used for esterification. In vitro tests, molecular docking, and in silico studies were conducted using standard procedures. RESULTS: In vitro tests revealed that the fatty acid chain length in mannopyranoside esters significantly affects the antifungal activity, where C12 chains are more potent against Aspergillus species. In terms of acylation site, mannopyranoside esters with a C8 chain substituted at the C-6 position are more active in antifungal inhibition. Molecular docking also revealed that these mannopyranoside esters had comparatively better stable binding energy and hence better inhibition, with the fungal enzymes lanosterol 14-alpha-demethylase (3LD6), urate oxidase (1R51), and glucoamylase (1KUL) than the standard antifungal drug fluconazole. Additionally, the thermodynamic, orbital, drug-likeness, and safety profiles of these mannopyranoside esters were calculated and discussed, along with the Structure-Activity Relationships (SAR). CONCLUSION: This study thus highlights the importance of the acylation site and lipid-like fatty acid chain length that govern the antimicrobial activity of mannopyranoside-based SFAE.

Practical Synthesis of 7-Bromo-4-chloro-1H-indazol-3-amine: An Important Intermediate to Lenacapavir.

7-Bromo-4-chloro-1H-indazol-3-amine is a heterocyclic fragment used in the synthesis of Lenacapavir, a potent capsid inhibitor for the treatment of HIV-1 infections. In this manuscript, we describe a new approach to synthesizing 7-bromo-4-chloro-1H-indazol-3-amine from inexpensive 2,6-dichlorobenzonitrile. This synthetic method utilizes a two-step sequence including regioselective bromination and heterocycle formation with hydrazine to give the desired product in an overall isolated yield of 38-45%. The new protocol has been successfully demonstrated on hundred-gram scales without the need for column chromatography purification. This new synthesis provides a potential economical route to the large-scale production of this heterocyclic fragment of Lenacapavir.

Structural relationship of regioselectively-sulfonated botryosphaeran derivatives on activity against herpes simplex virus type 1.

The bioactivities of sulfonated polysaccharides are frequently related to their substitution pattern. In this study, the regioselective sulfonation of an exocellular fungal (1→3)(1→6)-ß-D-glucan (botryosphaeran) was performed by two different methods: mild sulfonation (MS) and via pivaloyl ester (PS), in order to study the influence of the sulfonation pattern on the antiviral activity of the respective derivatives. Two sulfonated derivatives with substitution degrees of 0.82 (MS) and 0.49 (PS) were obtained, with substitution patterns at positions C-6, and C-2/C-4 of the glucose units, respectively. All derivatives were chemically characterized and evaluated for antiviral activity against Herpes simplex virus type 1 (HSV-1) KOS strain, and dengue type 2 (DENV-2). The sample sulfonated at positions C-6 (MS) showed a remarkable antiviral effect on HSV-1 (IC50 of 5.38 µg mL1), while PS remained inactive. The investigation of the mode of action of sample MS pointed to the inhibition of HSV-1 adsorption to the host cells. Both samples were inactive towards the dengue virus strain. This study demonstrated that the presence of sulfate groups at the C-6 positions of botryosphaeran is the preferred substitution pattern that enables the antiviral activity towards HSV-1.

Synthesis and Optical Properties of Binaphthyl Derivatives with Comprehensive Introduction of Phenylethynyl Groups.

In this study, compounds with phenylethynyl (PE) groups introduced at all of the possible positions of the methylene-bridged structure of the 1,1'-bi-2-naphthol backbone (3-PE to 8-PE) were synthesized. Compounds with four or six phenylethynyl groups (3,6-PE, 4,6-PE, 5,6-PE, 6,7-PE, and 3,4,6-PE) were also synthesized. The key reaction for the synthesis of these compounds was the Sonogashira reaction using halogen scaffolds. The new transformation methods include (1) selective bromination of the 5-position of the binaphthyl skeleton and (2) bromination of the 6-position and then iodination of the 4-position, followed by the Sonogashira reaction of iodine at the 4-position and lithiation and protonation of bromine at the 6-position. The optical properties of the compounds were evaluated. The extension of the π system greatly differed depending on the position of the phenylethynyl group. 4-PE, 4,6-PE, and 3,4,6-PE, in which the phenylethynyl groups were introduced in the extended direction of the naphthalene linkage axis, showed longer absorption and emission wavelengths and higher fluorescence quantum yields than the other compounds. In circularly polarized luminescence measurements, 7-PE showed a relatively large glum value, an interesting finding that reverses the sense.

Zinc Tetrafluoroborate Catalyzed Stereo- and Regioselective O-Glycosylation for the Direct Synthesis of ß-Glycosides from Armed O-Glycosyl Trichloroacetimidates.

Efficient stereo- and regioselective O-glycosylation methods remain essential to capacitate the studies of sugars and sugar derivatives in various disciplines. In this work, we demonstrated an operationally simple and cost-effective strategy for the synthesis of 1,2-trans glycosides by the activation of armed O-glycosyl trichloroacetimidates donor using zinc tetrafluoroborate. This mild, transition metal-free, and scalable approach allowed stereo- and regioselective synthesis of ß-glycosides with a wide range of acceptors containing various protecting groups/functionalities. This method is exemplified by synthesizing a branched trisaccharide fragment related to the cell wall O-polysaccharide of E. Coli O27.

Rational Design of the Spatial Effect in a Fe(II)/α-Ketoglutarate-Dependent Dioxygenase Reverses the Regioselectivity of C(sp3)-H Bond Hydroxylation in Aliphatic Amino Acids.

The hydroxylation of remote C(sp3)-H bonds in aliphatic amino acids yields crucial precursors for the synthesis of high-value compounds. However, accurate regulation of the regioselectivity of remote C(sp3)-H bonds hydroxylation in aliphatic amino acids continues to be a common challenge in chemosynthesis and biosynthesis. In this study, the Fe(II)/α-ketoglutarate-dependent dioxygenase from Bacillus subtilis (BlAH) was mined and found to catalyze hydroxylation at the γ and δ sites of aliphatic amino acids. Crystal structure analysis, molecular dynamics simulations, and quantum chemical calculations revealed that regioselectivity was regulated by the spatial effect of BlAH. Based on these results, the spatial effect of BlAH was reconstructed to stabilize the transition state at the δ site of aliphatic amino acids, thereby successfully reversing the γ site regioselectivity to the δ site. For example, the regioselectivity of L-Homoleucine (5 a) was reversed from the γ site (1 : 12) to the δ site (>99 : 1). The present study not only expands the toolbox of biocatalysts for the regioselective functionalization of remote C(sp3)-H bonds, but also provides a theoretical guidance for the precision-driven modification of similarly remote C(sp3)-H bonds in complex molecules.

Mechanochemical Regioselective [3+3] Annulation of 6-Amino Uracil with Propargyl Alcohols Catalyzed by a Brønsted Acid/Hexafluoroisopropanol.

A mechanochemistry approach is developed for regioselective synthesis of functionalized dihydropyrido[2,3-d]pyrimidines by milling propargylic alcohols and 6-aminouracils with HFIP/p-TsOH. In the case of tert-propargyl alcohols, this [3+3] cascade annulation proceeded through allenylation of uracil followed by a 6-endo trig cyclization. With sec-propargyl alcohols, the reaction furnished the propargylation of uracil. This atom economy ball milling reaction allows access to a broad range of dihydropyrido[2,3-d]pyrimidine derivatives in excellent yields. We demonstrated the gram scale synthesis of 3 g and post-synthetic modifications to effect the cyclization of 5 to 6.

Advancing 6-bromo-7-[11C]methylpurine to clinical use: improved regioselective radiosynthesis, non-clinical toxicity data and human dosimetry estimates.

BACKGROUND: 6-Bromo-7-[11C]methylpurine ([11C]BMP) is a radiotracer for positron emission tomography (PET) to measure multidrug resistance-associated protein 1 (MRP1) transport activity in different tissues. Previously reported radiosyntheses of [11C]BMP afforded a mixture of 7- and 9-[11C]methyl regioisomers. To prepare for clinical use, we here report an improved regioselective radiosynthesis of [11C]BMP, the results of a non-clinical toxicity study as well as human dosimetry estimates based on mouse PET data. RESULTS: [11C]BMP was synthesised by regioselective N7-methylation of 6-bromo-7H-purine (prepared under good manufacturing practice) with [11C]methyl triflate in presence of 2,2,6,6-tetramethylpiperidine magnesium chloride in a TRACERlab™ FX2 C synthesis module. [11C]BMP was obtained within a total synthesis time of approximately 43 min in a decay-corrected radiochemical yield of 20.5 ± 5.2%, based on starting [11C]methyl iodide, with a radiochemical purity > 99% and a molar activity at end of synthesis of 197 ± 130 GBq/µmol (n = 28). An extended single-dose toxicity study conducted in male and female Wistar rats under good laboratory practice after single intravenous (i.v.) administration of unlabelled BMP (2 mg/kg body weight) revealed no test item related adverse effects. Human dosimetry estimates, based on dynamic whole-body PET data in female C57BL/6J mice, suggested that an i.v. injected activity amount of 400 MBq of [11C]BMP will deliver an effective dose in the typical range of 11C-labelled radiotracers. CONCLUSIONS: [11C]BMP can be produced in sufficient amounts and acceptable quality for clinical use. Data from the non-clinical safety evaluation showed no adverse effects and suggested that the administration of [11C]BMP will be safe and well tolerated in humans.

Structural Characterization of 6-Halo-6-Deoxycelluloses by Direct-Dissolution Solution-State NMR Spectroscopy.

Regioselective modifications of cellulose using activated cellulose derivatives such as 6-halo-6-deoxycelluloses provide a convenient approach for developing sustainable products with properties tailored to specific applications. However, maintaining precise regiochemical control of substituent distribution in 6-halo-6-deoxycelluloses is challenging due to their insolubility in most common solvents and the resulting difficulties in precise structure elucidation by modern instrumental analytical techniques. Herein, an accessible NMR-based approach toward detailed characterization of 6-halo-6-deoxycelluloses, including the determination of the degrees of substitution at carbon 6 (DS6), is presented. It is shown that the direct-dissolution cellulose solvent, tetrabutylphosphonium acetate:DMSO-d6, converts 6-halo-6-deoxycelluloses to 6-monoacetylcellulose, enabling in situ solution-state NMR measurements. A range of 1D and 2D NMR experiments is used to demonstrate the quantitivity of the conversion and provide optimum dissolution conditions. In comparison with other NMR-based derivatization protocols for elucidating the structure of 6-halo-6-deoxycelluloses, the presented approach offers major advantages in terms of accuracy, speed, and simplicity of analysis, and minimal requirements for reagents or NMR instrumentation.

Indole C5-Selective Bromination of Indolo[2,3-a]quinolizidine Alkaloids via In Situ-Generated Indoline Intermediate.

There are many indole alkaloids that contain diverse functional groups attached to the benzene ring on the indole core. Promising biological activities of these alkaloids have been reported. Herein, we report the indole C5-selective bromination of indolo[2,3-a]quinolizidine alkaloids by adding nearly equimolar amounts of Br3 ⋅ PyH and HCl in MeOH. The resulting reaction plausibly proceeds through an indoline intermediate by the nucleophilic addition of MeOH to the C3-brominated indolenine intermediate. Data support the intermediacy of a C3-, C5-dibrominated indolenine intermediate as a brominating agent. These conditions demonstrate excellent selectivity for indole C5 bromination of natural products and their derivatives. Thus, these simple, mild, and metal-free conditions allow for selective, late-stage bromination followed by further chemical modifications. The utility of the brominated product prepared from naturally occurring yohimbine was demonstrated through various derivatizations, including a bioinspired heterodimerization reaction.