Myricetin-Loaded SBA-15 silica nanoparticles for enhanced management of Pyrexia, pain, and inflammation through modulation of MAPK/NF-kB and COX-2/PGE-2 pathways: Evidence from the biochemical, histological, and metabolomic analysis.

Myricetin (MYR) is a natural flavonoid that has several biological functions. However, some of its beneficial effects are diminished due to low water solubility, stability, and bioavailability. Herein, several kinds of silica nanoparticles, including MCM-41 and SBA-15, were loaded with MYR to improve its biological activity as an analgesic, antipyretic, and anti-inflammatory component, thereby overcoming its drawbacks. The nanoparticles (MYR@SBA-15) were formulated optimally, transforming MYR into an amorphous state. This transformation was confirmed via several strategies, including differential scanning calorimetry, Fourier transform infrared spectroscopy, and powder x-ray diffraction. As a result, there was a significant enhancement in the solubility and rate of dissolution in water. The anti-inflammatory benefits as an innovative strategy and the underlying mechanism of action of MYR and its SBA-15 silica nanoparticles (MYR@SBA-15) were investigated based on the biochemical, histological, immunohistochemical, and metabolomic assays alongside their antipyretic and analgesic characteristics. Compared to the usage of raw MYR, the administration of MYR@SBA-15 at doses of 25, 50, and 100 mg/kg significantly decreases pain perception by inhibiting the body's writhing motions induced by acetic acid. Furthermore, it helps regulate increased body temperature caused by baking yeast and effectively stabilizes it. It reduces the release of NO and PGE2 in a concentration-dependent manner by down-regulating iNOS and COX-2 expression in the inflammatory model. MYR and MYR@SBA-15 also inhibit the nuclear translocation of NF-κB, downregulate the expression of mitogen-activated protein kinases (MAPKs), such as p38, ERK1/2, and JNK protein, and reduce the generation of proinflammatory cytokines, such as TNF-α. In addition, inflammatory cardinal signs like paw edema caused by carrageenan in rats are greatly suppressed by MYR and MYR@SBA-15 treatment when compared to the control group. More noteworthy outcomes are shown in the MYR@SBA-15, particularly at a dose of 100 mg/kg. These results of biochemical and immuno-histochemistry suggest that MYR@SBA-15 may be a useful analgesic antipyretic and may also help reduce inflammation by altering MAPKs/NF-κB and COX-2/PGE2 signaling cascades. Serum metabolomics study demonstrated modifications in various low molecular weight metabolites with arthritis development. These metabolite levels were restored to normal when MYR@SBA-15 was administered via modulating several metabolic pathways, i.e., pyrimidine, energy metabolism, and proteins. Overall, MYR-loaded SBA-15 silica nanoparticles have demonstrated significant promise in enhancing metabolomics and providing a substantial capacity to regulate several oxidative stress and inflammatory mediators.

Synthesis and application of SBA-15 adsorbent for the removal of organic and inorganic substances.

This study investigates the adsorption of pollutants with different chemical structures; organic Naphtol Green B (NGB) dye and copper on a nanocomposite material with a hexagonal structure of the SBA-15 type. This research is divided into two main parts: the first carries out the synthesis of SBA-15 (Santa Barbra Amourphous) and its derivatives phases functionalized by 3-aminopropyl-triethoxylane (APTES) and calcined at 823 K. The second part presents the influence of the adsorption conditions on the adsorption efficiency of NGB dye and copper. High-resolution X-ray diffractogram (XRD) showed three distinct peaks characteristic of highly ordered mesoporous material. Nitrogen adsorption-desorption isotherm of SBA-15 at 77 K° is type IV typical of mesoporous materials. In addition, Fourier transform infrared spectroscopy (FT-IR) was also used in the characterization before and after the adsorption of the selected pollutants. At optimal conditions of pH 5.2, initial concentration of 50 mg/L, adsorbent dosage of 20 mg, and at adsorption time of 90 min the maximum removal of pollutants reached 76% and the adsorption capacity was 227.25 mg/g for NGB dye and 221.006 mg/g for copper. Furthermore, the adsorption kinetics followed the pseudo-second-order model, indicating that chemisorption was the dominant mechanism and the Sips isotherm model best described the adsorption data. Our research demonstrates that the SBA-15 material after modification is an effective adsorbent for removing effluents regardless of their different chemical structure (organic and inorganic).

Enhancing isoprene production by supplementing mevalonate pathway expressed in E. coli with immobilized enzymes.

Isoprene is an important component in rubber production, which can be produced using the E. coli mevalonic acid (MVA) pathway, and this method has the advantage of green environmental protection and sustainable. However, due to the excessive accumulation of intermediates, the growth of cells was inhibited and the enzyme activity decreased gradually, so it was difficult to increase the yield of isoprene. The immobilized enzyme has the characteristics of high stability and strong reusability, so in this study, the immobilized enzyme was added to the fermentation process of isoprene production by mevalonate metabolizing bacteria (PT-P), to explore the effect on isoprene synthesis. Under the optimum conditions, compared with PT-P fermentation alone, the enzyme catalyzes the conversion of MVA with an efficiency of up to 50.86%, and the yield of isoprene increased by about 30%, reaching 234.47 mg/L.

Recombinant Esterase (BaCEm) Immobilized on Polyethyleneimine-Impregnated Mesoporous Silica SBA-15 Exhibits Outstanding Catalytic Performance.

A recombinant esterase, BaCEm, derived from Bacillus aryabhattai and heterologously expressed in Escherichia coli, was successfully immobilized on polyethyleneimine-impregnated mesoporous silica SBA-15. This immobilization utilized glutaraldehyde as a crosslinker. Optimal conditions were established with a PEI/SBA-15 ratio of 25% (w/w), a pH of 7.5, and a glutaraldehyde concentration of 0.5% (w/w), resulting in a loading capacity of 76.4 mg/g, a recovery activity of 43.5%, and a specific activity of 7917 U/g for BaCEm. The immobilized BaCEm demonstrated high enantioselectivity, with an "E" value of 203.92, in the resolution assay of (R,S)-ethyl indoline-2-carboxylate. Notably, the immobilized enzyme, compared to its free counterpart, exhibited enhanced thermostability, maintaining 95.4% of its activity after 3 h at 30 °C. It also showed significant tolerance to organic solvents, retaining 48.4% and 28.7% residual activity in 10% v/v acetonitrile and acetone, respectively. Moreover, its storage stability was confirmed, with 68.5% residual activity preserved after 30 days at 4 °C. Remarkably, the immobilized BaCEm retained 58.1% of its activity after 10 reuse cycles, underscoring the potential of polyethyleneimine-impregnated mesoporous silica SBA-15 as an effective support for enzyme immobilization, promising for industrial applications.

A Novel Ternary Catalyst PW4@MOF-808@SBA-15 for Deep Extraction Oxidation Desulfurization of Model Diesel.

In this work, a novel heterogeneous catalyst consisting of peroxophosphotungstate, microporous MOF-808, and mesoporous SBA-15 was synthesized, characterized, and used to remove sulfides from model fuel. The prepared material, PW4@MOF-808@SBA-15, exhibits excellent catalytic activity with a desulfurization efficiency of 99.8% in 60 min for multicomponent simulated fuel, and the desulfurization rate can reach more than 90% after ten consecutive cycles. The excellent catalytic activity and reusability are attributed to the hierarchically porous hybrid material MOF-808@SBA-15, which can effectively encapsulate PW4 and provide a site for the oxidation of sulfides.

Purification and immobilization of ß-glucosidase using surface modified mesoporous silica Santa Barbara Amorphous 15 for eco-friendly preparation of sagittatoside A.

Functionalized mesoporous materials have become a promising carrier for enzyme immobilization. In this study, Santa Barbara Amorphous 15 (SBA-15) was modified by N-aminoethyl-γ-aminopropyl trimethoxy (R). R-SBA-15 was employed to purify and immobilize recombinant ß-glucosidase from Terrabacter ginsenosidimutans (BgpA) in one step for the first time. Optimum pH of the constructed R-SBA-15@BgpA were 7.0, and it has 20 â„ƒ higher optimal temperature than free enzyme. Relative activity of R-SBA-15@BgpA still retained > 70% at 42 â„ƒ after 8-h incubation. The investigation on organic reagent resistance revealed that the immobilized enzyme can maintain strong stability in 15% DMSO. In leaching test and evaluation of storage stability, only trace amount of protein was detected in buffer of the immobilized enzyme after storage at 4 â„ƒ for 33 days, and the immobilized BgpA still maintained > 50% relative activity. It also demonstrated good reusability, with 76.1% relative activity remaining after fourteen successive enzymatic hydrolyses of epimedin A to sagittatoside A. The newly proposed strategy is an effective approach for the purification and immobilization of BgpA concurrently. In addition, R-SBA-15@BgpA was demonstrated to have high efficiency and stability in this application, suggesting its great feasibility and potential to produce bioactive compounds such as secondary glycosides or aglycones from natural products.

Advancing Adsorption and Separation with Modified SBA-15: A Comprehensive Review and Future Perspectives.

Mesoporous silica SBA-15 has emerged as a promising adsorbent and separation material due to its unique structural and physicochemical properties. To further enhance its performance, various surface modification strategies, including metal oxide and noble metal incorporation for improved catalytic activity and stability, organic functionalization with amino and thiol groups for enhanced adsorption capacity and selectivity, and inorganic-organic composite modification for synergistic effects, have been extensively explored. This review provides a comprehensive overview of the recent advances in the surface modification of SBA-15 for adsorption and separation applications. The synthesis methods, structural properties, and advantages of SBA-15 are discussed, followed by a detailed analysis of the different modification strategies and their structure-performance relationships. The adsorption and separation performance of functionalized SBA-15 materials in the removal of organic pollutants, heavy metal ions, gases, and biomolecules, as well as in chromatographic and solid-liquid separation, is critically evaluated. Despite the significant progress, challenges and opportunities for future research are identified, including the development of low-cost and sustainable synthesis routes, rational design of SBA-15-based materials with tailored properties, and integration into practical applications. This review aims to guide future research efforts in developing advanced SBA-15-based materials for sustainable environmental and industrial applications, with an emphasis on green and scalable modification strategies.

SBA-15 supported Ni-Cu catalysts for hydrodeoxygenation of m-cresol to toluene.

Amidst concerns over fossil fuel dependency and environmental sustainability, the utilization of biomass-derived aromatic compounds emerges as a viable solution across diverse industries. In this scheme, the conversion of biomass involves pyrolysis, followed by a hydrodeoxygenation (HDO) step to reduce the oxygen content of pyrolysis oils and stabilize the end products including aromatics. In this study, we explored the properties of size controlled NiCu bimetallic catalysts supported on ordered mesoporous silica (SBA-15) for the catalytic gas-phase HDO of m-cresol, a lignin model compound. We compared their performances with monometallic Ni and Cu catalysts. The prepared catalysts contained varying Ni to Cu ratios and featured an average particle size of approximately 2 nm. The catalytic tests revealed that the introduction of Cu alongside Ni enhanced the selectivity for the direct deoxygenation (DDO) pathway, yielding toluene as the primary product. Optimal performance was observed with a catalyst composition comprising 5 wt.% Ni and 5 wr.% Cu, achieving 85 % selectivity to toluene. Further increasing the Cu content improved turnover frequency (TOF) values, but reduced DDO selectivity. These findings underscore the importance of catalyst design in facilitating biomass-derived compound transformations and offer insights into optimizing catalyst composition for more selective HDO reactions.

Preparation of a heterogeneous biocatalyst through Thermomyces lanuginosus lipase immobilization on pore-expanded SBA-15.

Heterogeneous biocatalysts were prepared by adsorbing T. lanuginosus lipase (TLL) onto uncalcined (SBAUC-TLL) and calcined (SBAC-TLL) SBA-15, using ammonium fluoride as a pore expander to facilitate TLL immobilization. At an enzyme load of 1 mg/g, high immobilization yields (>90 %) and recovered activities (>80 % for SBAUC-TLL and 70 % for SBAC-TLL) were achieved. When increasing the enzyme load to 5 mg/g, the immobilization yield of SBAUC-TLL was 80 %, and the recovered activity was 50 %, while SBAC-TLL had a yield of 100 % and a recovered activity of 36 %. Crosslinking with glutaraldehyde (GA) was conducted to improve stability (SBAUC-TLL-GA and SBAC-TLL-GA). Although SBAC-TLL-GA lost 25 % of initial activity after GA modifications, it exhibited the highest thermal (t1/2 = 5.7 h at 65 °C), when compared to SBAC-TLL (t1/2 = 12 min) and the soluble enzyme (t1/2 = 36 min), and operational stability (retained 100 % activity after 5 cycles). Both biocatalysts presented high storage stability since they retained 100 % of initial activity for 30 days. These results highlight SBA-15's potential as an enzyme support and the protocol's efficacy in enhancing stability, with implications for industrial applications in the food, chemical, and pharmaceutical sectors.

Tuning Textural Properties by Changing the Morphology of SBA-15 Mesoporous Materials.

Changing the morphology is an excellent option for altering the textural parameters of SBA-15 materials. This study provides a guide on how the properties of mesoporous structures behave according to their morphology and their contribution to thermal stability. The objective of this work was to synthesize different morphologies (spherical, hexagonal prisms, rice-like grains, rods, and fibers) of SBA-15 materials and evaluate the existing textural changes. The materials were synthesized by varying the temperature of the synthesis gel from 25 °C to 55 °C, with stirring at 300 or 500 rpm. The results of X-ray diffraction, Fourier transform infrared spectroscopy, N2 adsorption and desorption, and scanning electron microscopy were evaluated. Thermal stability tests were also conducted in an inert atmosphere. The materials were successfully synthesized, and it was observed that they all exhibited different characteristics, such as their ordering, interplanar distance, mesoporous parameter, specific surface area, micropore and mesopore volumes, external mesoporous area, and wall thickness. They also presented different thermal stabilities. The rice grain morphology had the highest specific surface area (908.8 cm2/g) and the best thermal stability, while the rod morphology had the best pore diameter (7.7 nm) and microporous volume (0.078 cm3/g).

Enhanced CH4/N2 Separation Efficiency of UiO-66-Br2 through Hybridization with Mesoporous Silica.

Efficient separation of CH4 from N2 is essential for the purification of methane from nitrogen. In order to address this problem, composite materials consisting of rod-shaped SBA-15-based UiO-66-Br2 were synthesized for the purpose of separating a CH4/N2 mixture. The materials were characterized via PXRD, N2 adsorption-desorption, SEM, TEM, FT-IR, and TGA. The adsorption isotherms of CH4 and N2 under standard pressure conditions for the composites were determined and subsequently compared. The study revealed that the composites were formed through the growth of MOF nanocrystals on the surfaces of the SBA-15 matrix. The enhancements in surface area and adsorption capacity of hybrid materials were attributed to the structural modifications resulting from the interactions between surface silanol groups and metal centers. The selectivity of the composites towards a gas mixture of CH4 and N2 was assessed utilizing the Langmuir adsorption equation. The results of the analysis revealed that the U6B2S5/SBA-15 sample exhibited the greatest selectivity for CH4/N2 adsorption compared to the other samples, with an adsorption selectivity parameter (S) of 20.06. Additional research is necessary to enhance the enrichment of methane from CH4/N2 mixtures using SBA-15-based metal-organic framework materials.

Designing of a new transdermal antibiotic delivery polymeric membrane modified by functionalized SBA-15 mesoporous filler.

A new drug delivery system using an asymmetric polyethersulfone (PES) membrane modified by SBA-15 and glutamine-modified SBA-15 (SBA-Q) was prepared in this study by the aim of azithromycin delivery enhancement in both in vitro and ex vivo experiments. The research focused on optimizing membrane performance by adjusting critical parameters including drug concentration, membrane thickness, modifier percentage, polymer percentage, and pore maker percentage. To characterize the fabricated membranes, various techniques were employed, including scanning electron microscopy, water contact angle, and tensile strength assessments. Following optimization, membrane composition of 17% PES, 2% polyvinylpyrrolidone, 1% SBA-15, and 0.5% SBA-Q emerged as the most effective. The optimized membranes demonstrated a substantial increase in drug release (906 mg/L) compared to the unmodified membrane (440 mg/L). The unique membrane structure, with a dense top layer facilitating sustained drug release and a porous sub-layer acting as a drug reservoir, contributed to this improvement. Biocompatibility assessments, antibacterial activity analysis, blood compatibility tests, and post-diffusion tissue integrity evaluations confirmed the promising biocompatibility of the optimized membranes. Moreover, long-term performance evaluations involving ten repeated usages underscored the reusability of the optimized membrane, highlighting its potential for sustained and reliable drug delivery applications.

Composites of Poly(3-hydroxybutyrate) and Mesoporous SBA-15 Silica: Crystalline Characteristics, Confinement and Final Properties.

Several composites based on poly(3-hydroxybutyrate) (PHB) and mesoporous SBA-15 silica were prepared by solvent-casting followed by a further stage of compression molding. The thermal stability, phase transitions and crystalline details of these composites were studied, paying special attention to the confinement of the PHB polymeric chains into the mesopores of the silica. For that, differential scanning calorimetry (DSC) and real-time variable-temperature X-ray scattering at small angles (SAXS) were performed. Confinement was stated first by the existence of a small endotherm at temperatures around 20 °C below the main melting or crystallization peak, being later confirmed by a notable discontinuity in the intensity of the main (100) diffraction from the mesoporous silica observed through SAXS experiments, which is related to the change in the scattering contrast before and after the crystallization or melting of the polymer chains. Furthermore, the usual α modification of PHB was developed in all samples. Finally, a preliminary investigation of mechanical and relaxation parameters was carried out through dynamic-mechanical thermal analysis (DMTA). The results show, in the temperature interval analyzed, two relaxations, named α and ß (the latest related to the glass transition) in order of decreasing temperatures, in all specimens. The role of silica as a filler is mainly observed at temperatures higher than the glass transition. In such cases, stiffness is dependent on SBA-15 content.

Development of Ac2-26 Mesoporous Microparticle System as a Potential Therapeutic Agent for Inflammatory Bowel Diseases.

Introduction: Inflammatory bowel diseases (IBDs) disrupt the intestinal epithelium, leading to severe chronic inflammation. Current therapies cause adverse effects and are expensive, invasive, and ineffective for most patients. Annexin A1 (AnxA1) is a pivotal endogenous anti-inflammatory and tissue repair protein in IBD. Nanostructured compounds loading AnxA1 or its active N-terminal mimetic peptides improve IBD symptomatology. Methods: To further explore their potential as a therapeutic candidate, the AnxA1 N-terminal mimetic peptide Ac2-26 was incorporated into SBA-15 ordered mesoporous silica and covered with EL30D-55 to deliver it by oral treatment into the inflamed gut. Results: The systems SBA-Ac2-26 developed measurements revealed self-assembled rod-shaped particles, likely on the external surface of SBA-15, and 88% of peptide incorporation. SBA-15 carried the peptide Ac2-26 into cultured Raw 264.7 macrophages and Caco-2 epithelial cells. Moreover, oral administration of Eudragit-SBA-15-Ac2-26 (200 µg; once a day; for 4 days) reduced colitis clinical symptoms, inflammation, and improved epithelium recovery in mice under dextran-sodium sulfate-induced colitis. Discussion: The absorption of SBA-15 in gut epithelial cells is typically low; however, the permeable inflamed barrier can enable microparticles to cross, being phagocyted by macrophages. These findings suggest that Ac2-26 is successfully delivered and binds to its receptors in both epithelial and immune cells, aligning with the clinical results. Conclusion: Our findings demonstrate a simple and cost-effective approach to delivering Ac2-26 orally into the inflamed gut, highlighting its potential as non-invasive IBD therapy.

LaCoO3/SBA-15 as a high surface area catalyst to activate peroxymonosulfate for degrading atrazine in water.

An efficient perovskite-based heterogeneous catalyst is highly desired to activate peroxymonosulfate (PMS) for removing organic pollutants in water. A high surface area PMS-activator was fabricated by loading LaCoO3 on SBA-15 to degrade atrazine (ATR) in water. The LaCoO3/SBA-15 depicted better textural properties and higher catalytic activity than LaCoO3. In 6.0 min, atrazine (ATZ) degradation in the selected LaCoO3/SBA-15/PMS system, LaCoO3, adsorption by LaCoO3/SBA-15, sole PMS processes reached approximately 100%, 55.15%, 12.80%, and 16.65 % respectively. Furthermore, 0.04 mg L-1 Co was leached from LaCoO3/SBA-15 during PMS activation by LaCoO3/SBA-15. The LaCoO3/SBA-15 showed stable catalytic activity after reuse. The use of radical scavengers and electron paramagnetic resonance spectroscopy (EPR) demonstrated that ROS such as 1O2, O2•-, •OH, and SO4•- were generated by PMS activated by LaCoO3/SBA-15 owing to redox reactions [Co2+/Co3+, and O2-/O2]. EPR, XPS, ATR-FTIR, EIS, LSV, and chronoamperometric measurements were used to explain the catalytic mechanism for PMS activation. Excellent atrazine degradation was due to high surface area, porous nature, diffusion-friendly structure, and ROS. Our investigation proposes that perovskites with different A and B metals and modified perovskites can be loaded on high surface area materials to activate PMS into ROS.

Coumarin derivative-functionalized nanoporous silica as an on-off fluorescent sensor for detecting Fe3+ and Hg2+ ions: a circuit logic gate.

A highly efficient fluorescent sensor (S-DAC) was easily created by functionalizing the SBA-15 surface with N-(2-Aminoethyl)-3-Aminopropyltrimethoxysilane followed by the covalent attachment of 7-diethylamino 3-acetyl coumarin (DAC). This chemosensor (S-DAC) demonstrates selective and sensitive recognition of Fe3+ and Hg2+ in water-based solutions, with detection limits of 0.28 × 10-9 M and 0.2 × 10-9 M for Hg2+ and Fe3+, respectively. The sensor's fluorescence characteristics were examined in the presence of various metal ions, revealing a decrease in fluorescence intensity upon adding Fe3+ or Hg2+ ions at an emission wavelength of 400 nm. This sensor was also able to detect ferric and mercury ions in spinach and tuna fish. The quenching mechanism of S-DAC was investigated using UV-vis spectroscopy, which confirmed a static-type mechanism for fluorescence quenching. Moreovre, the decrease in fluorescence intensity caused by mercury and ferric ions can be reversed using trisodium citrate dihydrate and EDTA as masking agents, respectively. As a result, a circuit logic gate was designed using Hg2+, Fe3+, trisodium citrate dihydrate, and EDTA as inputs and the quenched fluorescence emission as the output.

Hybrid Materials Obtained by Immobilization of Biosynthesized Ag Nanoparticles with Antioxidant and Antimicrobial Activity.

Ag nanoparticles (AgNPs) were biosynthesized using sage (Salvia officinalis L.) extract. The obtained nanoparticles were supported on SBA-15 mesoporous silica (S), before and after immobilization of 10% TiO2 (Degussa-P25, STp; commercial rutile, STr; and silica synthesized from Ti butoxide, STb). The formation of AgNPs was confirmed by X-ray diffraction. The plasmon resonance effect, evidenced by UV-Vis spectra, was preserved after immobilization only for the sample supported on STb. The immobilization and dispersion properties of AgNPs on supports were evidenced by TEM microscopy, energy-dispersive X-rays, dynamic light scattering, photoluminescence and FT-IR spectroscopy. The antioxidant activity of the supported samples significantly exceeded that of the sage extract or AgNPs. Antimicrobial tests were carried out, in conditions of darkness and white light, on Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli and Candida albicans. Higher antimicrobial activity was evident for SAg and STbAg samples. White light increased antibacterial activity in the case of Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). In the first case, antibacterial activity increased for both supported and unsupported AgNPs, while in the second one, the activity increased only for SAg and STbAg samples. The proposed antibacterial mechanism shows the effect of AgNPs and Ag+ ions on bacteria in dark and light conditions.

Low-Density Polyethylene-Based Novel Active Packaging Film for Food Shelf-Life Extension via Thyme-Oil Control Release from SBA-15 Nanocarrier.

The use of natural raw substances for food preservation could provide a great contribution to food waste reduction, circular economy enhancement, and green process application widening. Recent studies indicated that the use of porous materials as adsorbents for natural essential oils provided nanohybrids with excellent antioxidant and antimicrobial properties. Following this trend in this work, a thymol oil (TEO) rich SBA-15 nanohybrid was prepared and characterized physiochemically with various techniques. This TEO@SBA-15 nanohybrid, along with the pure SBA-15, was extruded with low-density polyethylene (LDPE) to develop novel active packaging films. Results indicated that TEO loading was higher than other porous materials reported recently, and the addition of both pure SBA-15 and TEO@SBA-15 to the LDPE increased the water/oxygen barrier. The film with the higher thyme-oil@SBA-15 nanohybrid content exhibited a slower release kinetic. The antioxidant activity of the final films ignited after 48 h, was in the range of 60-70%, and was almost constant for 7 days. Finally, all tests indicated a sufficient improvement by the addition of thyme-oil@SBA-15 nanohybrids in the pure LDPE matrix and the concentration of wt. 10% of such nanocarriers provided the optimum final LDPE/10TEO@SBE-15 active packaging film. This material could be a potential future product for active packaging applications.

Comparative study on Al-SBA-15 prepared by spray drying and traditional methods for bulky hydrocarbon cracking: Properties, performance and influencing factors.

Mesoporous aluminosilicates Al-SBA-15 with large pore sizes and suitable acid properties are promising substitutes to zeolites for catalytic cracking of bulky hydrocarbons without molecular diffusion limitation. The conventional processes to synthesize Al-SBA-15 are time-consuming and often suffer from low "framework" Al contents. Herein, Al-SBA-15 microspheres are synthesized using the rapid and scalable microfluidic jet spray drying technique. They possess uniform particle sizes (45-60 µm), variable surface morphologies, high surface areas (264-340 m2/g), uniform mesopores (3.8-4.9 nm) and rich acid sites (126-812 µmol/g) and high acid strength. Their physicochemical properties are compared with the counterparts synthesized using traditional hydrothermal and evaporation-induced self-assembly methods. The spray drying technique results in a higher incorporation of aluminum (Al) atoms into the silica "framework" compared to the other two methods. The catalytic cracking efficiencies of 1,3,5-triisopropylbenzene (TIPB) on the Al-SBA-15 materials synthesized using the three different methods and nanosized ZSM-5 are compared. The optimal spray-dried Al-SBA-15 exhibits the best performance with 100 % TIPB conversion, excellent selectivity (about 75 %) towards the formation of deeply cracked products (benzene and propylene) and high stability. The catalytic performances of the spray-dried Al-SBA-15 with varying Si/Al ratios are also compared. The reasons for the different performances of the different materials are discussed, where the mesopores, high acid density and strength are observed to play the most critical role. This work might provide a basis for the synthesis of mesoporous rich metal-substituted silica materials for different catalytic applications.

Evaluation of biomass sources on the production of biofuels from lignocellulosic waste over zeolite catalysts.

Catalytic fast pyrolysis (CFP) is a promising method to convert biomass waste into sustainable bio-oils. However, the relationship gap between biomass characteristics and bio-oil quality has hindered the development of CFP technology. This study investigated the pyrolysis and CFP of ten biomass sources over zeolites, and showed that biomass sources and zeolites played important roles in bio-oil production. For noncatalytic trials, the bio-oil yield was positively related to holocellulose (R2 = 0.75) and volatiles content (R2 = 0.62) but negatively to ash content (R2 = -0.65). The bio-oil quality was dramatically improved after catalyst addition. For CFP over ZSM-5, hydrocarbons selectivity of bio-oils was increased by 1.6∼79.3 times, which was closely related to H/C ratio (R2 = 0.79). For ZSM-5@SBA-15 trials, the dependency of hydrocarbons selectivity on biomass characteristics was less clear than that in ZSM-5 counterparts, although undesirable PAHs were inhibited for most biomass sources. This study demonstrated the influence mechanism of biomass characteristics on bio-oil compositions.