RESUMO
Edible plant oils are a key component of the daily human diet, and the quality and safety of plant oils are related to human health. Perfluorinated and polyfluoroalkyl substances (PFASs) are pollutants that can contaminate plant oil through the processing of raw materials or exposure to materials containing these substances. Thus, establishing a sensitive and accurate analytical method for the determination of PFASs is critical for ensuring the safety of plant oils. In this study, a method based on acetonitrile extraction and solid phase extraction purification combined with ultra-high performance liquid chromatography-triple quadrupole mass spectrometry (UHPLC-MS/MS) was developed for the simultaneous determination of 21 PFASs, including perfluorocarboxylic acids, perfluoroalkyl sulfonic acids, and fluorotelomer sulfonic acids, in edible plant oils. The chromatographic conditions and MS parameters were optimized, and the influences of the extraction solvents and purification method were systematically studied. Plant oil samples were directly extracted with acetonitrile and purified using a weak anion-exchange (WAX) column. The 21 target PFASs were separated on a reversed-phase C18 chromatographic column and detected using a triple quadrupole mass spectrometer with an electrospray ionization source. The mass spectrometer was operated in negative-ion mode. The target compounds were analyzed in multiple reaction monitoring (MRM) mode and quantified using an internal standard method. The results demonstrated that the severe interference observed during the detection of PFASs in the co-extracted substances was completely eliminated after the extraction mixture was purified using a WAX column. The 21 target PFASs showed good linearity in their corresponding ranges, with correlation coefficients greater than 0.995. The limits of detection (LODs) and limits of quantification (LOQs) of the method were in the range of 0.004-0.015 and 0.015-0.050 µg/kg, respectively. The recoveries ranged from 95.6% to 115.8%, with relative standard deviations (RSDs) in the range of 0.3%-10.9% (n=9). The established method is characterized by simple sample pretreatment, good sensitivity, high immunity to interferences, and good stability, rendering it suitable for the rapid analysis and accurate determination of typical PFASs in edible plant oils.
Assuntos
Fluorocarbonos , Contaminação de Alimentos , Óleos de Plantas , Espectrometria de Massas em Tandem , Cromatografia Líquida de Alta Pressão/métodos , Fluorocarbonos/análise , Espectrometria de Massas em Tandem/métodos , Contaminação de Alimentos/análise , Óleos de Plantas/química , Óleos de Plantas/análiseRESUMO
BACKGROUND: Postharvest dehydration affects the metabolism of grapes, impacting odorous secondary metabolites and therefore the features of the corresponding passito wines - high-quality products with winemaking practices linked to specific territories and related autochthonous grape varieties. Water loss and temperature conditions are the main variables of the dehydration process. This study assessed how they impacted the patterns of free and glycosylated volatile organic compounds (VOCs) of the exocarp (pulp) and epicarp (skin) in Nebbiolo and Aleatico, a neutral and semi-aromatic red grape variety, respectively. Dehydration parameters were set in tunnel conditions, and VOCs were quantitatively analyzed by solid phase extraction-gas chromatography-mass spectrometry. RESULTS: For Nebbiolo grapes, weight loss had a greater impact on free volatiles than dehydration temperature, with a 20% weight loss increasing total VOCs in both exocarp and epicarp. Low temperature (10 °C) significantly increased (P < 0.05) the glycosylated VOCs' terpene content. In Aleatico grapes, weight loss was key in modulating free volatiles, with 30% weight loss and 15 °C leading to significant increases in VOCs, especially exocarp terpenes, acids and benzenoids. More stressful dehydration (30% weight loss at 25 °C) resulted in higher aroma precursor concentrations. CONCLUSION: These findings can assist passito wine production in preserving varietal aromas of original grapes trough optimized dehydration conditions, preventing sensory homologation occurring because of strong uncontrolled dehydration. They can also promote optimization of energy consumption, thus fostering financial and environmental sustainability. © 2024 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
RESUMO
Metal-organic frameworks (MOFs) are a fascinating family of crystalline porous materials made up of metal clusters and organic linkers. In comparison with other porous materials, MOFs have unique characteristics including high surface area, homogeneous open cavities, and permanent high porosity with variable shapes and sizes. For these reasons, MOFs have recently been explored as sorbents in sample preparation by solid-phase extraction (SPE). However, SPE requires large amounts of sorbents and suffers from limited contact surfaces with analytes, which compromises extraction recovery and efficiency. Dispersive SPE (D-SPE) overcomes these limitations by dispersing the sorbents into the sample, which in turn increases contact with the analytes. Miniaturization of the microextraction procedure, particularly the amount of sorbent reduces the amount consumed of the organic solvent and shorten the time required to attain the equilibrium state. This may explain the reported high efficiency and applicability of MOFs in dispersive micro SPE (D-µ-SPE). This method retains all the advantages of solid phase extraction while also being simpler, faster, cheaper, and, in some cases, more effective in comparison with D-SPE. Besides, D-µ-SPE requires smaller amounts of the sorbents which reduces the overall cost, and the amount of waste generated from the analytical process. In this review, we discuss the applications of MOFs in D-µ-SPE of various analytes including pharmaceuticals, pesticides, organic dyes from miscellaneous matrices including water samples, biological samples and food samples.
RESUMO
Neonicotinoids (NEOs), used as insecticides against aphids, whiteflies, lepidopterans, and beetles, have numerous detrimental impacts on human health, including chronic illnesses, cancer, infertility, and birth anomalies. Monitoring the residues in food products is necessary to guarantee public health and ecological balance. The present work validated a new method to measure seven neonicotinoid insecticides (acetamiprid ACT, clothianidin CLT, dinotefuran DNT, imidacloprid IMD, nitenpyram NTP, thiacloprid TCP, and thiamethoxan THT) in wheat. The analytical procedure was based on simple and fast wheat sample cleanup using solid-phase extraction (SPE) to remove interferents and enrich the NEOs, alongside the NEOs' separation and quantification by reverse-phase chromatography coupled with a diode array detector (DAD). The validation process was validated using the accuracy profile strategy, a straightforward decision tool based on the measure of the total error (bias plus standard deviation) of the method. Our results proved that, in the future, at least 95% of the results obtained with the proposed method would fall within the ±15% acceptance limits. The test's cost-effectiveness, rapidity, and simplicity suggest its use for determining the levels of acetamiprid, clothianidin, dinotefuran, imidacloprid, nitenpyram, thiacloprid, and thiamethoxam in routine analyses of wheat.
RESUMO
Developing robust analytical techniques is a vital phase to facilitate understanding the roles and impacts of various omic profilings in cellular functions. The comprehensive analysis of various biological molecules within a biological system requires a precise sample preparation technique. Solid-Phase Extraction (SPE) has proven to be an indispensable method in lipidomic analysis, providing an uncomplicated and user-friendly technique for extraction and purification of lipid components from complex biological matrices. Of all the factors influencing the reliability and success of SPE, column or adsorbent materials, flow rate, and storage conditions are paramount in terms of their significance. In this chapter, we will discuss in detail the SPE steps for lipidomic analysis in biofluid samples (serum and plasma) and muscle tissues.
Assuntos
Lipidômica , Lipídeos , Extração em Fase Sólida , Extração em Fase Sólida/métodos , Lipidômica/métodos , Lipídeos/isolamento & purificação , Lipídeos/química , Humanos , AnimaisRESUMO
Those involved in drug testing continue to grapple with the dynamic nature of emerging psychoactive substances (NPS) and their rapid infiltration into society. The challenge extends beyond merely detecting and measuring NPS using analytical tools; it also encompasses the complexities arising from the formation and presence of metabolites and degradation products. This study utilises liquid chromatography time-of-flight mass spectrometry to investigate the stability of new psychoactive substances in wastewater. Seven NPS compounds including 25C-NBOMe, 5F-APINACA 4-hydroxyphenyl, AB-PINACA, APINACA 4-hydroxyphenyl, fentanyl, norfentanyl and MDPV, along with their corresponding internal standard, were examined. Reference material for each NPS compound was introduced into a wastewater sample from a Wessex water treatment plant. The sample was then exposed to four different environments: room temperature, refrigerator temperature, acidification to pH 2, and the introduction of sodium metabisulfite. The findings highlight the critical dependence of storage conditions on target analytes, emphasizing the paramount importance of the time elapsed between collection and analysis for NPS wastewater analysis. Notably, synthetic cannabinoids exhibit limited stability in wastewater whereas cathinone-like substances demonstrate greater stability. Furthermore, metabolites prove to be more stable in wastewater than the parent drug, suggesting that focusing on metabolite detection may be more favourable for future analysis.
RESUMO
Marine sponges represent a good source of natural metabolites for biotechnological applications in the pharmacological, cosmeceutical, and nutraceutical fields. In the present work, we analyzed the biotechnological potential of the alien species Haliclona (Halichoclona) vansoesti de Weerdt, de Kluijver & Gomez, 1999, previously collected in the Mediterranean Sea (Faro Lake, Sicily). The bioactivity and chemical content of this species has never been investigated, and information in the literature on its Caribbean counterpart is scarce. We show that an enriched extract of H. vansoesti induced cell death in human melanoma cells with an IC50 value of 36.36 µg mL-1, by (i) triggering a pro-inflammatory response, (ii) activating extrinsic apoptosis mediated by tumor necrosis factor receptors triggering the mitochondrial apoptosis via the involvement of Bcl-2 proteins and caspase 9, and (iii) inducing a significant reduction in several proteins promoting human angiogenesis. Through orthogonal SPE fractionations, we identified two active sphingoid-based lipid classes, also characterized by nuclear magnetic resonance and mass spectrometry, as the main components of two active fractions. Overall, our findings provide the first evaluation of the anti-cancer potential of polar lipids isolated from the marine sponge H. (Halichoclona) vansoesti, which may lead to new lead compounds with biotechnological applications in the pharmaceutical field.
Assuntos
Antineoplásicos , Apoptose , Haliclona , Lipídeos , Melanoma , Animais , Haliclona/química , Humanos , Melanoma/patologia , Melanoma/tratamento farmacológico , Melanoma/metabolismo , Linhagem Celular Tumoral , Apoptose/efeitos dos fármacos , Antineoplásicos/farmacologia , Antineoplásicos/química , Antineoplásicos/isolamento & purificação , Poríferos/químicaRESUMO
An efficient technique for quantitative analysis of tetrodotoxin (TTX) in human plasma and urine has been developed, which combines liquid chromatography-tandem mass spectrometry (LC-MS/MS) with online MCX solid phase extraction (SPE) cleanup. Sample preparation, including extraction with acetonitrile containing 0.5â¯% acetate acid, centrifugation, and filtration, was followed by online SPE cleanup. The whole run-time was less than 15â¯min, including online cleanup, chromatographic separation, and re-equilibration of the online SPE - LC-MS/MS system. The parameters of sample extraction, purification, separation, and detection were optimized. The matrix-matched internal standard calibration standard curves with linear regression coefficients larger than 0.9990 were established for quantification. The LOD and LOQ for this approach were determined to be 0.1â¯ng/mL and 0.3â¯ng/mL, respectively. The recoveries for varied concentrations of TTX in human plasma and urine were 84.9-104.2â¯% and 89.2-109.6â¯%, respectively. The matrix effects of TTX in human plasma and urine matrices were 85.5â¯% and 74.3â¯%, respectively, and both the inter- and intra-day precision values were less than 9.5â¯%. This analytical method was successfully employed for detecting TTX in biological samples from a poisoned patient who accidentally ingested the nassarius glans.
Assuntos
Extração em Fase Sólida , Espectrometria de Massas em Tandem , Tetrodotoxina , Tetrodotoxina/sangue , Tetrodotoxina/urina , Extração em Fase Sólida/instrumentação , Extração em Fase Sólida/métodos , Cromatografia Líquida de Alta Pressão , Humanos , Calibragem , Sistemas On-Line , Modelos Lineares , Limite de Detecção , Reprodutibilidade dos TestesRESUMO
A method for accurately determining 3-nitropropionic acid in sugarcane was established for the first time using gas chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry (GC - APCI-MS/MS). Under acidic conditions, 3-nitropropionic acid is methylated to obtain methyl 3-nitropropionate. The derivative product was purified using dispersive solid-phase extraction (d-SPE) method and analyzed using GC - APCI-MS/MS. The recovery experiments were conducted at three concentrations: low, medium, and high. The recovery rates ranged from 75.1% to 90.2%, the relative standard deviations were <8.2%, and the limit of quantification was 2.0 µg/kg. The method offers the advantage of being accurate, sensitive, and specific, meeting the requirements of the determination of 3-nitropropionic acid in sugarcane.
Assuntos
Nitrocompostos , Propionatos , Saccharum , Extração em Fase Sólida , Espectrometria de Massas em Tandem , Propionatos/isolamento & purificação , Propionatos/análise , Saccharum/química , Nitrocompostos/química , Nitrocompostos/análise , Nitrocompostos/isolamento & purificação , Extração em Fase Sólida/métodos , Cromatografia Gasosa-Espectrometria de Massas , Contaminação de Alimentos/análiseRESUMO
The study aimed to develop a rapid and sensitive colorimetric platform based on the Emerson reaction to visualize and determine total aflatoxins (AFs) in peanut oil. This method offers the advantage of fast screening for AFs (AFB1, AFB2, AFG1, and AFG2), eliminating the need for specific antibodies. The proposed approach combined colorimetric detection with magnetic dummy imprinted solid-phase extraction and purification, enhancing sensitivity and selectivity. The oxidizer aided the colorless AFs in reacting with 4-aminoantipyrine, producing green condensates. Thus, a dual-mode approach was developed for AFs detection, employing both UV-vis colorimetric and smartphone-based colorimetry. Both methods showed a good linear relationship with the concentration of AFs. Notably, the smartphone-based method demonstrated a detection range of 0.5-57 µg/kg, with a detection limit as low as 0.21 µg/kg. The suggested colorimetric methods present a promising potential for onsite detection and fast screening of AFs in actual samples.
Assuntos
Aflatoxinas , Colorimetria , Contaminação de Alimentos , Óleo de Amendoim , Smartphone , Extração em Fase Sólida , Colorimetria/métodos , Extração em Fase Sólida/métodos , Extração em Fase Sólida/instrumentação , Aflatoxinas/análise , Aflatoxinas/isolamento & purificação , Óleo de Amendoim/química , Contaminação de Alimentos/análise , Limite de Detecção , Impressão MolecularRESUMO
Haff disease typically develops after eating contaminated marine or freshwater species, especially fish. Despite still having an unknown etiology, recent reports have suggested its possible correlation with palytoxins. Therefore, the present work aimed to optimize and perform a validation of a sensitive method using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) for the analysis of palytoxin and some of its analogs, with the main purpose of investigating their presence in marine and freshwater food samples associated with Haff disease in Brazil. The method optimization was performed using a central composite rotatable design and fish samples fortified with the palytoxin standard. Then, the optimized method was validated for different food matrices, including freshwater and marine fish, mollusks, and crustaceans. The sample preparation involved a solid-liquid extraction using methanol and water, solid-phase extraction using Strata-X cartridges, and on-column palytoxin oxidation. The detection of the main oxidized fragments (amino and amide aldehydes) was achieved by LC-MS/MS with electrospray ionization in positive mode, using a C18 column, as well as acetonitrile and water as mobile phases, both acidified with 0.1 % of formic acid. After optimization and validation, the etiological investigation involved the analysis of 16 Brazilian Haff disease-related food samples (in natura and leftover meals) from 2022. The method was demonstrated to be appropriate for quantitative analysis of freshwater and marine species. So far, it has proven to be one of the most sensitive methods related to palytoxin detection (LOD 10 µg/kg), being able to work in a range that includes the provisional ingestion limit (30 µg/kg). Regarding the Haff disease-related samples analysis, there is a strong indication of palytoxin contamination since the amino aldehyde (common fragment for all palytoxins) was detected in 15 of the 16 samples. Selected results were confirmed using liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS).
Assuntos
Acrilamidas , Venenos de Cnidários , Contaminação de Alimentos , Água Doce , Alimentos Marinhos , Animais , Acrilamidas/análise , Brasil , Peixes , Contaminação de Alimentos/análise , Água Doce/química , Limite de Detecção , Espectrometria de Massa com Cromatografia Líquida/métodos , Toxinas de Poliéter , Reprodutibilidade dos Testes , Alimentos Marinhos/análise , Extração em Fase Sólida/métodos , Espectrometria de Massas em Tandem/métodosRESUMO
Bisphenol analogues (BPs) are a class of typical environmental endocrine-disrupting chemicals (EDCs). This study aimed to establish a highly sensitive and high-throughput method utilizing 96-well solid-phase extraction (96-well SPE) in conjunction with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) employing multiple reaction monitoring (MRM), information-dependent acquisition (IDA), and enhanced product ion (EPI) scan modes for the identification and quantitative analysis of nine BPs in human urine. Urine samples were initially thawed to room temperature, followed by digestion using ß-glucuronidase in an ammonium acetate buffer solution at 37 °C overnight. Subsequently, they were purified using 96-well SPE and finally analyzed by UHPLC-MS/MS. The limits of detection (LOD) for the nine BPs ranged from 0.05 µgâkg-1 to 0.3 µg kg-1. Average recoveries fell within the range of 92.8 % to 111.7 %. Moreover, both the intra-day and inter-day precisions were satisfactory, with relative standard deviations (RSDs) ranging from 2.2 % to 6.7 % and 3.5 % to 6.3 %, respectively. The targets in the samples exhibited a perfect match, with a purity fit value exceeding 70 % from the self-built library. The analytical method developed in this study demonstrates high accuracy and sensitivity. In addition, the MRM-IDA-EPI mode can effectively identifies the target BPs and prevents false positive detection of analytes in the urine.
Assuntos
Compostos Benzidrílicos , Limite de Detecção , Fenóis , Extração em Fase Sólida , Espectrometria de Massas em Tandem , Humanos , Espectrometria de Massas em Tandem/métodos , Cromatografia Líquida de Alta Pressão/métodos , Extração em Fase Sólida/métodos , Fenóis/urina , Compostos Benzidrílicos/urina , Compostos Benzidrílicos/química , Disruptores Endócrinos/urina , Reprodutibilidade dos Testes , Feminino , Adulto , MasculinoRESUMO
Emerging pollutants derived from human and animal sources, are present in soils and pose significant environmental and health impacts, even at low concentrations. Their detection in soil is analytically complex due to soil interference and the rapid degradation of compounds in the matrix. In this study, a protocol was optimized for quantifying hormonal steroids (n = 7), human drugs (n = 3), and antibiotics (n = 3) by a dual-phase extraction using QuEChERS and Solid Phase Extraction (SPE), followed by analysis using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The double extraction phase allows an accurate and effective purification of the target compounds while eliminating the interference in the soil matrix. The method is optimized to detect environmental concentrations of these pollutants, to suit large-scale sampling campaigns and to maintain the efficiency of extraction while reducing analysis time. The limits of detection (LODs) of these compounds ranged between 0.0043 and 0.13 ng/g and recovery rates between 75.9 % and 105.39 %.â¢Enhanced Analyte Purification: Implements QuEChERS and SPE for robust removal of matrix interferences, optimizing target compound isolation.â¢Precision at Trace Levels: Secures LODs as minimal as 0.0043 ng/g, enabling accurate detection of low-concentration contaminants.â¢Adapted for Broad-scale sampling: Modifies extraction and analysis durations to accommodate large-scale environmental assessments.
RESUMO
Background: Pneumothorax is a rare but serious complication of septic pulmonary embolism (SPE). SPE is a life-threatening disorder wherein infected thrombi bring infarction of the terminal and small caliber parts of the pulmonary vasculature and develop multiple nodular and cavitary lesions. Interventions other than conservative chest tube drainage for pneumothorax due to SPE have rarely been reported. Here, we present a case of bilateral pneumothorax due to SPE treated with intrapleural minocycline pleurodesis. Case Description: A 72-year-old male patient previously diagnosed as esophageal carcinoma developed metachronous bilateral pneumothorax while treated for brain metastases. Based on blood cultures and chest computed tomography images, he was diagnosed with pneumothorax secondary to SPE due to methicillin-susceptible Staphylococcus aureus bacteremia. Bilateral chest tube drainage was instituted. Continuous air leakage was found bilaterally after chest tube placement. He was treated with broad-spectrum antibiotics based on the susceptibility profile and supportive treatment for sepsis. Approximately 3 weeks later, air leakage significantly reduced. We performed intrapleural minocycline pleurodesis bilaterally to prevent the recurrence of pneumothorax; the left side was firstly treated and the right side was treated 2 weeks later. Both chest tubes were successfully removed two days after procedures. Although the patient finally died of brain metastases 1 month after pleurodesis, he never recurred pneumothorax. Conclusions: Intrapleural minocycline pleurodesis may be one of the useful and efficacious options in terms of treating intractable pneumothorax associated with SPE. Intrapleural minocycline pleurodesis could be a consideration for intractable pneumothorax related to SPE.
RESUMO
Clinical and biological samples are often scarce and precious (e.g., rare cell isolates, microneedle tissue biopsies, small-volume liquid biopsies, and even single cells or organelles). Typical large-scale proteomic methods, where significantly higher protein amounts are analyzed, are not directly transferable to the analysis of limited samples due to their incompatibility with pg-, ng-, and low-µg-level protein sample amounts. Here, we report the on-microsolid-phase extraction tip (OmSET)-based sample preparation workflow for sensitive analysis of limited biological samples to address this challenge. The developed platform was successfully tested for the analysis of 100-10,000 typical mammalian cells and is scalable to allow for lower and larger protein amounts and more samples to be analyzed (i.e., higher throughput of analysis).
Assuntos
Proteômica , Extração em Fase Sólida , Fluxo de Trabalho , Proteômica/métodos , Humanos , Extração em Fase Sólida/métodos , Proteínas/análise , Proteoma/análiseRESUMO
A rapid on-line solid-phase extraction liquid chromatography high-resolution mass spectrometry (on-line SPE-LC-HRMS) method was developed to analyze 11 ultra-short and short-chain PFAS in surface water. Analytical optimization involved screening 7 chromatographic columns and 5 on-line SPE columns, as well as evaluating SPE loading conditions, filters, sample acidification, chromatographic mobile phases, and SPE loading mobile phases. The optimized method was then applied to 44 river water samples collected in Eastern Canada, including sites near airports with fire-training areas. Among the 11 targeted PFAS, the most frequently detected were trifluoroacetic acid (TFA, 4.6-220 ng/L), perfluorobutanoic acid (PFBA, 0.85-33 ng/L), perfluoropentanoic acid (PFPeA, 1.2-2100 ng/L), trifluoromethane sulfonic acid (TMS, 0.01-4.3 ng/L), and perfluorobutane sulfonic acid (PFBS, 0.07-450 ng/L). Levels of C3-C5 perfluoroalkyl carboxylic acids (PFCAs), C2-C4 perfluoroalkyl sulfonates (PFSAs) and n:3 polyfluoroalkyl acids (n = 2,3; n:3 acids) were significantly higher in water bodies near fire-training area sites compared with rivers in urban areas. In contrast, TFA, TMS, and 1:3 acid were not significantly elevated, likely reflecting atmospheric deposition or other diffuse sources for these compounds. Nontarget and suspect screening analysis revealed an abundance of other ultra-short and short-chain PFAS in AFFF-impacted water bodies. Perfluoroalkyl sulfonamides (FASA, C2, C3, and C5), perfluoroalkyl sulfonamide propanoic acids (FASA-PrA, C1-C2) and n:3 acids (n = 1, 4, and 5) were detected for the first time in environmental surface waters.
RESUMO
Given continuous improvements in industrial production and living standards, the analysis and detection of complex biological sample systems has become increasingly important. Common complex biological samples include blood, serum, saliva, and urine. At present, the main methods used to separate and recognize target analytes in complex biological systems are electrophoresis, spectroscopy, and chromatography. However, because biological samples consist of complex components, they suffer from the matrix effect, which seriously affects the accuracy, sensitivity, and reliability of the selected separation analysis technique. In addition to the matrix effect, the detection of trace components is challenging because the content of the analyte in the sample is usually very low. Moreover, reasonable strategies for sample enrichment and signal amplification for easy analysis are lacking. In response to the various issues described above, researchers have focused their attention on immuno-affinity technology with the aim of achieving efficient sample separation based on the specific recognition effect between antigens and antibodies. Following a long period of development, this technology is now widely used in fields such as disease diagnosis, bioimaging, food testing, and recombinant protein purification. Common immuno-affinity technologies include solid-phase extraction (SPE) magnetic beads, affinity chromatography columns, and enzyme linked immunosorbent assay (ELISA) kits. Immuno-affinity techniques can successfully reduce or eliminate the matrix effect; however, their applications are limited by a number of disadvantages, such as high costs, tedious fabrication procedures, harsh operating conditions, and ligand leakage. Thus, developing an effective and reliable method that can address the matrix effect remains a challenging endeavor. Similar to the interactions between antigens and antibodies as well as enzymes and substrates, biomimetic molecularly imprinted polymers (MIPs) exhibit high specificity and affinity. Furthermore, compared with many other biomacromolecules such as antigens and aptamers, MIPs demonstrate higher stability, lower cost, and easier fabrication strategies, all of which are advantageous to their application. Therefore, molecular imprinting technology (MIT) is frequently used in SPE, chromatographic separation, and many other fields. With the development of MIT, researchers have engineered different types of imprinting strategies that can specifically extract the target analyte in complex biological samples while simultaneously avoiding the matrix effect. Some traditional separation technologies based on MIP technology have also been studied in depth; the most common of these technologies include stationary phases used for chromatography and adsorbents for SPE. Analytical methods that combine MIT with highly sensitive detection technologies have received wide interest in fields such as disease diagnosis and bioimaging. In this review, we highlight the new MIP strategies developed in recent years, and describe the applications of MIT-based separation analysis methods in fields including chromatographic separation, SPE, diagnosis, bioimaging, and proteomics. The drawbacks of these techniques as well as their future development prospects are also discussed.
Assuntos
Impressão Molecular , Humanos , Cromatografia de Afinidade/métodos , Extração em Fase Sólida/métodos , Ensaio de Imunoadsorção EnzimáticaRESUMO
The main objective of this study was to investigate the metabolism of miconazole, an azole antifungal drug. Miconazole was subjected to incubation with human liver microsomes (HLM) to mimic phase I metabolism reactions for the first time. Employing a combination of an HLM assay and UHPLC-HRMS analysis enabled the identification of seven metabolites of miconazole, undescribed so far. Throughout the incubation with HLM, miconazole underwent biotransformation reactions including hydroxylation of the benzene ring and oxidation of the imidazole moiety, along with its subsequent degradation. Additionally, based on the obtained results, screen-printed electrodes (SPEs) were optimized to simulate the same biotransformation reactions, by the use of a simple, fast, and cheap electrochemical method. The potential toxicity of the identified metabolites was assessed using various in silico models.
Assuntos
Espectrometria de Massas , Miconazol , Microssomos Hepáticos , Miconazol/química , Miconazol/metabolismo , Humanos , Cromatografia Líquida de Alta Pressão/métodos , Microssomos Hepáticos/metabolismo , Espectrometria de Massas/métodos , Técnicas Eletroquímicas/métodos , Antifúngicos/química , Antifúngicos/metabolismo , BiotransformaçãoRESUMO
BACKGROUND: The ongoing infusion of pharmaceutical and personal care products (PPCPs) into ecosystems sustains a perpetual life cycle and leads to multi-generational exposures. Limited understanding of their environmental impact and their intrinsic ability to induce physiological effect in humans, even at low doses, pose great risks to human health. Few scholarly works have conducted systematic research into the occurrence of PPCPs within potable water systems. Concurrently, the associated monitoring techniques have not been comprehensively examined with regards to the specific nature of drinking water, namely whether the significant presence of disinfectants may influence the detection of PPCPs. RESULTS: A modified approach in terms of detailed investigation of sample preservation and optimization of an in-lab fabricated solid phase extraction (SPE) cartridge filled with DVB-VP and PS-DVB sorbent was proposed. Favorable methodological parameters were achieved, with correlation coefficients spanning from 0.9866 to 0.9998. The LODs of the PPCPs fluctuated from 0.001 to 2 µg L-1, while the LOQs varied from 0.002 to 5 µg L-1. The analysis of spiked samples disclosed a methodological precision of 2.31-9.86 % and a recovery of 52.4-119 %. We utilized the established method for analyzing 14 water samples of three categories (source water, finished water and tap water) from five centralized water supply plants. A total of 24 categories encompassing 72 PPCPs were detected, with the concentrations of PPCPs manifested a marked decrease from source water to finished water and finally to tap water. SIGNIFICANCE: Our research meticulously examined the enhancement and purification effects of widely used commercial SPE cartridges and suggested the use of in-lab fabricated SPE cartridges packed with DVB-VP and PS-DVB adsorbents. We also conducted a systematic evaluation of the need to incorporate ascorbic acid and sodium thiosulfate as preservatives for PPCP measurement, in consideration of the unique characteristics of drinking water matrices, specifically, the significant concentration levels of disinfectants. Furthermore, the proposed method was effectively employed to study the presence of PPCPs in source water, finished water, and tap water collected from centralized water supply plants.
Assuntos
Extração em Fase Sólida , Poluentes Químicos da Água , Extração em Fase Sólida/métodos , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/isolamento & purificação , Preparações Farmacêuticas/análise , Abastecimento de Água , Água Potável/análise , Cosméticos/análise , Cosméticos/química , Monitoramento Ambiental/métodosRESUMO
Flame retardants could improve the safety properties of lithium batteries (LBs) with the sacrifice of electrochemical performance due to parasitic reactions. To concur with this, we designed thermal-response clothes for hexachlorophosphazene (HCP) additives by the microcapsule technique with urea-formaldehyde (UF) resin as the shell. HCP@UF combines with polyacrylonitrile (PAN) by hydrogen bonds successfully to form PAN-HCP@UF as the flame-retardant solid polymer electrolyte. The hydrogen bonds ensure excellent mechanical properties of the polymer electrolyte. The multiscale free radical-annihilating agent HCP effectively eliminates hydrogen free radicals of electrolytes under high temperature, showing excellent flame retardation. During the operation of the battery, functional groups on the UF resin act as active sites to promote the migration of lithium ions, while the internal HCP is protected from electrochemical reaction. With 25% HCP@UF addition, the limiting oxygen index of the PAN-HCP@UF increases to 28% and the Li+ transfer number up to 0.80. By UF protection, the initial capacity retention rate of the Li||LFP battery that assembles with PAN-HCP@UF is 88.8% after 500 cycles at 0.5 C. Thus, the microcapsule-encapsulated approach is deemed to provide an innovative strategy to prepare high-safety solid-state LB with a stable long cycle life.