All-Cellulose-based flexible Zinc-Ion battery enabled by waste pomelo peel.

Aqueous zinc-ion batteries are attracting extensive attention due to the long-term service life and credible safety as well as the superior price performance between the low cost of manufacture and high energy density. The fabrication of inexpensive, high-performance flexible solid-state zinc-ion batteries, thus, are urgently need for the blooming wearable electronics. Herein, as a proof-of-concept study of waste into wealth, cellulose flakes derived from waste pomelo peel are utilized as the substrate for electrodes and hydrogel electrolytes into a flexible rocking-chair zinc-ion battery. The unique sandwich-type structure holding the flake-like cellulose substrate and linear carbon nanotubes endows the flexible cathode and anode with fast ion and electron transportation. The obtained cellulose-based hydrogel electrolytes on account of special affinity with aqueous ZnSO4 electrolyte output an excellent ionic conductivity. The assembled flexible rocking-chair zinc-ion battery benefitting from the synergistic effect of sandwich-type electrodes and cellulose-based hydrogel electrolytes demonstrates outstanding electrochemical performance and mechanical properties. This work not only puts up an effective roadmap for flexible battery devices, but also reveals the great potential of waste biomass materials in energy storage applications.

An ultrasensitive sandwich-type electrochemical immunosensor based on rGO-TEPA/ZIF67@ZIF8/Au and AuPdRu for the detection of tumor markers CA72-4.

Cancer antigen 72-4 (CA72-4) is an important marker of cancer detection, and accurate detection of CA72-4 is urgently required. Herein, a sandwich-type immunosensor was constructed for detection CA72-4 based on composite nanomaterial as the substrate material and trimetal nanoparticles as the nanoprobe. The composite nanomaterial rGO-TEPA/ZIF67@ZIF8/Au used as a selective bio-recognition element were modified on the glassy carbon electrode (GCE) surface. Meanwhile, the electrochemical nanoprobes were fabricated through the AuPdRu trimeric metal. After the target antigen 72-4 were captured, the nanoprobes were further assembled to form an antibody1 (Ab1)- antigen-antibody2 (Ab2) nanoprobes sandwich-like system on the electrode surface. Then, hybrid the substrate material rGO-TEPA/ZIF67@ZIF8/Au and the AuPdRu trimeric metal nanoprobes efficiently catalyzed the reduction of H2O2 and amplified the electrochemical signals. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), and Chronoamperometry (I-T) methods were used to characterize the performance and detection capabilities for CA72-4 of the prepared immunosensors. The results showed that the detection limit was 1.8 × 10-5 U/mL (S/N = 3), and the linear range was 0.001-1000 U/mL. This study provides a new signal amplification strategy for electrochemical sensors and a theoretical basis for the clinical application of immunosensor to detect other tumor markers.

Tetrahedral DNA-linked aptamer-antibody-based sandwich-type electrochemical sensor with Ag@Au core-shell nanoparticles as a signal amplifier for highly sensitive detection of α-fetoprotein.

The conventional electrochemical detection strategy for alpha-fetoprotein (AFP) is limited by the antigen-antibody (Ag-Ab) reactions and suffers from low sensitivity and poor reproducibility due to the inconsistency of Ab-modified electrodes. Herein, we designed and explored a sandwich-type electrochemical sensor for highly sensitive detection of AFP based on aptamer (Apt)-AFP-Ab interaction mode with silver@gold (Ag@Au) core-shell nanoparticles (NPs) as a signal amplifier. AuNPs were electrodeposited onto MXene (Ti3C2TX)-modified glassy carbon electrode (GCE) to get AuNPs/MXene/GCE and further used as the signal amplification substrate. The tetrahedral DNA-linked AFP aptamers were immobilized onto AuNPs/MXene/GCE surface via Au-S bonds and used as the sensing and recognition platform for AFP capturing. Ag@AuNPs with core-shell structures were synthesized, characterized, and bound with Ab as detection elements by catalyzing H2O2 reduction. In the presence of AFP, a stable Apt-AFP-Ab sandwich structure was formed owing to the high affinities of aptamer and Ab toward the target AFP. The catalytic current produced by H2O2 reduction increased linearly with the logarithm of AFP concentration from 5 × 10-4 ng/mL to 1 × 105 ng/mL, accompanied by a low detection limit (1.6 × 10-4 ng/mL). Moreover, the novel sandwich-type electrochemical sensor shows high sensitivity, outstanding selectivity, and promising performance in the analysis of actual samples, displaying a broad application prospect in bioanalysis.

Electrochemical Detection of a Breast Cancer Biomarker with an Amine-Functionalized Nanocomposite Pt-Fe3O4-MWCNTs-NH2 as a Signal-Amplifying Label.

We report an ultrasensitive sandwich-type electrochemical immunosensor to detect the breast cancer biomarker CA 15-3. Amine-functionalized composite of reduced graphene oxide and Fe3O4 nanoparticles (MRGO-NH2) was used as an electrochemical sensing platform material to modify the electrodes. The nanocomposite comprising Pt and Fe3O4 nanoparticles (NPs) anchored on multiwalled carbon nanotubes (Pt-Fe3O4-MWCNTs-NH2) was utilized as a pseudoenzymatic signal-amplifying label. Compared to reduced graphene oxide, the composite MRGO-NH2 platform material demonstrated a higher electrochemical signal. In the Pt-Fe3O4-MWCNTs-NH2 label, multiwalled carbon nanotubes provided the substratum to anchor abundant catalytic Pt and Fe3O4 NPs. The nanocomposites were thoroughly characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy. An electroanalytical study and prevalidation of the immunosensor was carried out. The immunosensor exhibited exceptional capabilities in detecting CA 15-3, offering a wider linear range of 0.0005-100 U mL-1 and a lower detection limit of 0.00008 U mL-1. Moreover, the designed immunosensor showed good specificity, reproducibility, and acceptable stability. The sensor was successfully applied to analyze samples from breast cancer patients, yielding reliable results.

Facile fabricate sandwich-structured molecularly imprinted dopamine polymer for simultaneously specific capture of Low-density lipoprotein and eliminate "bad cholesterol".

A simplified approach for preparation of sandwich type molecularly imprinted polymers (PPDA-MIPs) is proposed for simultaneously identify Low-density lipoprotein (LDL) and dispose "bad cholesterol". Porous polydopamine nanosphere (PPDA) is applied as a matrix for immobilization of LDL, and the imprinted layer is formed by dopamine acting as a functional monomer. Since imprinted cavities exhibit shape memory effects in terms of recognizing selectivity, the PPDA-MIPs exhibit excellent selectivity toward LDL and a substantial binding capacity of 550.3 µg mg-1. Meanwhile, six adsorption/desorption cycles later, the adsorption efficiency of 83.09 % is still achieved, indicating the adequate stability and reusability of PPDA-MIPs. Additionally, over 80 % of cholesterol is recovered, indicating the completeness of "bad cholesterol" removal in LDL. Lastly, as demonstrated by gel electrophoresis, PPDA-MIPs performed satisfactory behavior for the removal of LDL from the goat serum sample.

Long-term follow-up of total hip arthroplasty using polyethylene-ceramic composite (sandwich) liner.

INTRODUCTION: Ceramic-on-ceramic bearings have been widely used since their introduction in the 1970s. First-generation ceramics have very high fracture (breakage) rates. To overcome this, in the 1990s, modular cotyloid insert designs were developed, consisting of a ceramic and polyethylene composite (sandwich-type) liner; however, high implant fracture rates were observed in the medium term. We aimed to estimate the cumulative incidences of revision surgery (implant failure) and implant failure due to fractures, survival rates (time-to-revision surgery and time-to-fracture), and the long-term clinical and radiological outcomes in our series. METHODS: This was an observational, longitudinal, ambispective, single-centre study based on patients who underwent primary total hip arthroplasty (THA) using a sandwich-type liner (Cerasul), only available in our tertiary hospital between January 1999 and December 2002. Cumulative incidences were estimated and the 95% confidence interval (95% CI) was calculated. The Kaplan-Meier method was used to assess the time-to-revision surgery and time-to-fracture. RESULTS: 54 patients (49 men) were included, accounting for 59 sandwich-type linear implants. The mean (range) age was 47.4 (22-57) years. The primary THA indications were osteoarthritis (28 patients), osteonecrosis (14), childhood pathology sequelae (11), and inflammatory arthritis (6). The cumulative incidence of revision surgery by implants was 8.5% (5/59, 95% CI, 3.5-19.2%), 9.3% by patients (5/54, 95% CI, 4.0-19.9%), and 5.1% by implant fractures (3/59, 95%CI, 1.7-13.9%). The median (Interquartile Range, IQR) time-to-revision surgery was 158 (72.5-161) months, and the time to fracture was 182 (138-215) months. All primary THAs had good clinical and long-term survival outcomes. All implants had signs of solid fixation. CONCLUSIONS: After a 20-year follow-up period, the polyethylene-ceramic sandwich-type liner showed a long survival rate and low cumulative incidence of implant fracture; however, implant fractures remain the main complication. Orthopaedic surgeons should be aware that some patients still have this type of prosthesis and must be capable of responding quickly if a fracture occurs.

An ultrasensitive electrochemical immunosensor based on meso-PdN NCs and Au NPs/N-CNTs for quantitative cTnI detection.

Electrochemical immunosensors have gained considerable attention in detecting human disease markers due to their excellent specificity, high sensitivity, and facile operation. Herein, a rational-designed sandwich-type electrochemical immunosensor is constructed for the sensitive detection of cardiac troponin I (cTnI) using nitrogen-doped carbon nanotubes loaded with gold nanoparticles (Au NPs/N-CNTs) as substrate and highly active mesoporous palladium-nitrogen nanocubes (meso-PdN NCs) as secondary antibody markers. Benefitting from its large specific surface area (638.04 m2 g-1) and high nitrogen content, novel polydopamine (PDA)/ halloysite nanotubes (HNTs) hybrid derived one-dimensional (1D) N-CNTs can provide more binding sites for the in-situ growth of Au NPs to connect Ab1. Furthermore, as an ideal substrate material, Au NPs/N-CNTs exhibit finely tuned mesoporous structures and outstanding conductivity, which facilitate the mass and electron transfer during the electrocatalysis process. Besides, highly concave surfaces and crystalline mesopores of meso-PdN NCs expose more surfaces and crevices, providing abundant reactive sites for H2O2 reduction. Remarkably, the as-obtained immunosensor presented a wide linear range (from 10 fg mL-1 to 100 ng mL-1) and an excellent low detection limit (9.85 fg mL-1). This study may offer new insights into the precise fabrication of efficient electrochemical immunosensors for various clinical diagnosis applications.

An IoT-based aptasensor biochip for the diagnosis of periodontal disease.

Severe periodontitis affects nearly 1 billion individuals worldwide, highlighting the need for early diagnosis. Here, an integrated system consisting of a microfluidic chip and a portable point-of-care (POC) diagnostic device is developed using a polymethyl methacrylate (PMMA) chip fabrication and a three-dimensional printing technique, which is automatically controlled by a custom-designed smartphone application to routinely assess the presence of a specific periodontitis biomarker, odontogenic ameloblast-associated protein (ODAM). A sandwich-type fluorescence aptasensor is developed on a microfluidic chip, utilizing aptamer pair (MB@OD64 and OD35@FAM) selectively binding to target ODAM. Then this microfluidic chip is integrated into an automated Internet of Things (IoT)-based POC device, where fluorescence intensity, as a signal, from the secondary aptamer binding to ODAM in a sandwich-type binding reaction on the microfluidic chip is measured by a complementary metal oxide semiconductor (CMOS) camera with a 488 nm light-emitting diode (LED) excitation source. Obtained signals are processed by a microprocessor and visualized on a wirelessly connected smartphone application. This integrated biosensor system allows the rapid and accurate detection of ODAM within 30 min with a remarkable limit of detection (LOD) of 0.011 nM under buffer conditions. Clinical application is demonstrated by successfully distinguishing between low-risk and high-risk individuals with 100 % specificity. A strong potential in the translation of this fluorescence-based microfluidic aptasensor integrated with an IoT-based POC system is expected to be employed for non-invasive, on-site, rapid, and accurate ODAM detection, facilitating periodontitis diagnosis.

Ultrasensitive Upconversion Nanoparticle Immunoassay for Human Serum Cardiac Troponin I Detection Achieved with Resonant Waveguide Grating.

Selective detection of biomarkers at low concentrations in blood is crucial for the clinical diagnosis of many diseases but remains challenging. In this work, we aimed to develop an ultrasensitive immunoassay that can detect biomarkers in serum with an attomolar limit of detection (LOD). We proposed a sandwich-type heterogeneous immunosensor in a 3 × 3 well array format by integrating a resonant waveguide grating (RWG) substrate with upconversion nanoparticles (UCNPs). UCNPs were used to label a target biomarker captured by capture antibody molecules immobilized on the surface of the RWG substrate, and the RWG substrate was used to enhance the upconversion luminescence (UCL) of UCNPs through excitation resonance. The LOD of the immunosensor was greatly reduced due to the increased UCL of UCNPs and the reduction of nonspecific adsorption of detection antibody-conjugated UCNPs on the RWG substrate surface by coating the RWG substrate surface with a carboxymethyl dextran layer. The immunosensor exhibited an extremely low LOD [0.24 fg/mL (9.1 aM)] and wide detection range (1 fg/mL to 100 pg/mL) in the detection of cardiac troponin I (cTnI). The cTnI concentrations in human serum samples collected at different times during cyclophosphamide, epirubicin, and 5-fluorouracil (CEF) chemotherapy in a breast cancer patient were measured by an immunosensor, and the results showed that the CEF chemotherapy did cause cardiotoxicity in the patient. Having a higher number of wells in such an array-based biosensor, the sensor can be developed as a high-throughput diagnostic tool for clinically important biomarkers.

A sensitive sandwich-type electrochemical immunosensor using nitrogen-doped graphene/metal-organic framework-derived CuMnCoOx and Au/MXene for the detection of breast cancer biomarker.

In terms of cancer-related deaths among women, breast cancer (BC) is the most common. Clinically, human epidermal growth receptor 2 (HER2) is one of the most commonly used diagnostic biomarkers for facilitating BC cell proliferation and malignant growth. In this study, a disposable gold electrode (DGE) modified with gold nanoparticle-decorated Ti3C2Tx (Au/MXene) was utilized as a sensing platform to immobilize the capturing antibody (Ab1/Au/MXene). Subsequently, nitrogen-doped graphene (NG) with a metal-organic framework (MOF)-derived copper-manganese-cobalt oxide, tagged as NG/CuMnCoOx, was used as a probe to label the detection antibody (Ab2). A sandwich-type immunosensor (NG/CuMnCoOx/Ab2/HER2-ECD /Ab1/Au/MXene/DGE) was developed to quantify HER2-ECD. NG/CuMnCoOx enhances the conductivity, electrocatalytic active sites, and surface area to immobilize Ab2. In addition, Au/MXene facilitates electron transport and captures more Ab1 on its surface. Under optimal conditions, the resultant immunosensor displayed an excellent linear range of 0.0001 to 50.0 ng. mL-1. The detection limit was 0.757 pg·mL-1 with excellent selectivity, appreciable reproducibility, and high stability. Moreover, the applicability for determining HER2-ECD in human serum samples indicates its ability to monitor tumor markers clinically.

DNA four-way junction-driven dual-rolling circle amplification sandwich-type aptasensor for ultra-sensitive and specific detection of tumor-derived exosomes.

There is an urgent need to accurately quantify tumor-derived exosomes, which have emerged as promising non-invasive tumor diagnostic biomarkers. Herein, a bispecific-aptamer sandwich-type gold nanoparticle-modified electrochemical aptasensor was developed based on a four-way junction (4-WJ)-triggered dual rolling circle amplification (RCA)-assisted methylene blue (MB)/G-quadruplex strategy for extremely specific and sensitive exosome detection. This aptamer/exosome/aptamer sandwich-type design contained a CD63-specific aptamer and a cancerous mucin-1 (MUC1) protein-specific aptamer. The CD63 aptamer modified on a gold electrode captured exosomes, and then the sandwich-type aptasensor was formed with the addition of the MUC1 aptamer. The MUC1 aptamer's 3'-end sequence facilitated the formation of 4-WJ, assisted by a molecular beacon probe and a binary DNA probe. Subsequently, a dual-RCA reaction was triggered by binding to two cytosine-rich circle DNA templates at both ends of 4-WJ. Ultimately, dual-RCA products containing multiple G-quadruplex conformations were generated with the assistance of K+ to trap abundant MB indicators and amplify electrochemical signals. The aptasensor exhibited high specificity, sensitivity, repeatability, and stability toward MCF-7-derived exosomes, with a detection limit of 20 particles/mL and a linear range of 1 × 102 to 1 × 107 particles/mL. Moreover, it showed excellent applicability in clinical settings to recover exosomes in normal human serum. Our aptasensor is anticipated to serve as a versatile platform for detecting various specific aptamer-based targets in biomedical and bioanalytical applications.

Split aptamer-based sandwich-type ratiometric biosensor for dual-modal photoelectrochemical and electrochemical detection of 17ß-estradiol.

BACKGROUND: As one of the most potent environmental estrogens, 17ß-estradiol (E2), which can be enriched into organisms through the food chain and cause harmful biological effects in humans, has been frequently detected in the water environment of the world. High performance liquid chromatography (HPLC) and gas chromatograohy-mass spectrometry (GC/MS) have been widely used for quantification of E2. Despite excellent accuracy, tedious pretreatment and expensive instruments result in their limited application. It is clear that there is an urgent need to establish simple, sensitive and accurate methods for the determination of E2. RESULTS: A split aptamer-based sandwich-type ratiometric biosensor based on split aptamer was developed by coupling photoelectrochemical and electrochemical assays for E2 detection. For analysis, the two fragments of split aptamer recognized E2 by forming sandwich structure, which triggered hybridization chain reaction (HCR) to produce double-stranded DNA (dsDNA) with CdTe quantum dots (QDs) labeled hairpin DNA. The resultant dsDNA can further absorb methylene blue (MB) to sensitize CdTe QDs for an enlarged photocurrent (IPEC) and output a redox current of IMB, and both of them acted as response signals for detection; [Fe(CN)6]3-/4- probe produced redox current of I[Fe(CN)6]3-/4- as reference signal. Using IMB/I[Fe(CN)6]3-/4- and IPEC/I[Fe(CN)6]3-/4- as yardsticks, the developed split aptamer-based sandwich-type ratiometric biosensor provides two linear ranges of 0.1-5000 pg mL-1 for IMB/I[Fe(CN)6]3-/4- and 0.1-10000 pg mL-1 for IPEC/I[Fe(CN)6]3-/4- with detection limits of 0.06 pg mL-1 and 0.02 pg mL-1, respectively. SIGNIFICANCE: These results of the biosensor are benefiting from the coupling of photoelectrochemical (PEC) and electrochemical (EC) assays as well as the unique cooperative recognition mechanism of split aptamer. This method not only enabled the biosensor to be successfully applied to the determination of E2 in lake water, but also broadens the prospects for the realization of sensitive and accurate detection of E2.

2D Z-scheme ZnIn2S4/g-C3N4 heterojunction based on photoelectrochemical immunosensor with enhanced carrier separation for sensitive detection of CEA.

Semiconducting materials based on photoelectrochemical (PEC) sensors have been widely utilized for detection. Meanwhile, the sensitivity of the PEC sensor was limited by low-efficiency carrier separation. Thus, a novel sandwich-type PEC bioimmunosensing based on 2D Z-scheme ZnIn2S4/g-C3N4 heterojunction as a photosensitive material and BiVO4 as a photoquencher was designed for the sensitive detection of carcinoembryonic antigen (CEA). Firstly, the 2D ZnIn2S4/g-C3N4 structure provided a multitude of activated sites which facilitated the loading of the capture antibody (Ab1). Secondly, the Z-scheme heterojunction had a high redox capacity while promoting the rapid separation and migration of photogenerated electron-hole pairs (e-/h+). Thus it was able to consume more electron donors to a certain extent, resulting in a higher initial photocurrent. In addition, BiVO4 with large spatial potential resistance was introduced for the first time to realize signal amplification. BiVO4 could not only compete with substrate materials for electron donors, but also effectively prevent electron donors from contacting the substrate, further reducing the photocurrent signal. Under optimized conditions, the sensor had a favorable detection range (0.0001-100 ng/mL) to CEA and a low detection limit of 0.03 pg/mL. With high specificity, excellent stability, and remarkable reproducibility, this sensor provided a new perspective for constructing accurate and convenient PEC immunosensor for bioanalysis and early disease diagnosisdisease diagnosis.

A signal-off photoelectrochemical sandwich-type immunosensor based on WO3/TiO2 Z-scheme heterojunction.

A sandwich "signal-off" type photoelectrochemical (PEC) immunosensor was fabricated based on a composite heterojunction of tungsten oxide/titanium oxide microspheres (WO3/TiO2) acting as signal amplification platform and carbon microspheres loaded by gold nanoparticles (Cs@Au NPs) utilized as the label for detecting antibody. WO3/TiO2 had excellent photoelectric performance, and the results of Mott-Schottky plots, open-circuit voltage, and electron spin resonance spectroscopy indicated that it belonged to the Z-scheme heterojunction transfer mechanism of photogenerated carriers. To achieve the sensitization of PEC immunosensor, Cs@Au NP-labeled immunocomplex can effectively reduce the photocurrent signal. The PEC immunosensors were fabricated under the optimal conditions of 1:1 WO3/TiO2 (molar ratio), 2.0 mg mL-1 WO3/TiO2, and 1.5 mg mL-1 Cs@Au NPs. Through comparison of the detection results of label-free and sandwich-type PEC immunosensors for nucleocapsid (N) protein of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), we found that the sensitivity of the sandwich type was 2.53 times the label-free type, and the limit of detection was 0.006 ng mL-1, i.e., 3.17 times lower than the label-free type. This demonstrates that the developed sandwich-type PEC immunosensor will have a brighter application prospect.

Magnetically controlled graphene field-effect transistor biosensor for highly sensitive detection of cardiac troponin I.

Herein, we have constructed a magnetic graphene field-effect transistor biosensor (MGFETs) for highly sensitive detection of cardiac troponin I (CTNI). Graphene films transferred to ITO conductive glass as conductive channels. CTNI aptamer was immobilized onto the graphene film via 1-pyrene-butanoic acid succinimidyl ester (PBASE) to capture CTNI. Magnetic nanobeads (MBs) modified with CTNI antibody were added to the reaction chamber to form an aptamer/CTNI/antibody/magnetic nanobeads sandwich-type complex. We found that the magnetic force exerted on the complex leads to an impedance change of the graphene film. The reason for this result is that the magnetic field exerts an influence on the MBs, causing CTNI aptamer strand to bend, resulting in a change in the distance between the double conductive layers of the graphene film surface and the test solution. With periodic sampling integration, different concentrations of CTNI can be detected with high sensitivity. Due to the stringent recognition capability and high affinity between the CTNI aptamer and CTNI, MGFETs have the potential to detect various types of proteins. Furthermore, MGFETs also have the potential to be utilized for the detection of DNA or specific cells in the future.

Triple signal-enhancing sandwich-type electrochemical immunosensor based on Au@SNHC and PtPdCu/BNC for detection of Cardiac Troponin I.

A novel multiple amplification strategy for electrochemical immunoassay was developed elaborately. The realization of this strategy is based on the high efficiency catalysis of boron nitrogen double-doped carbon loaded trimetallic PtPdCu mulberry-like nanospheres (PtPdCu/BNC) and the satisfactory conductivity of gold nanoparticles modified with sulfur nitrogen co-doped hollow porous carbon (Au@SNHC). Single crystal anisotropic Pt octahedral seeds were synthesized with sodium citrate as shape-directing agent, and then three metals were grown in situ to prepare the trimetallic PtPdCu mulberry nanospheres, which had excellent utilization of atoms and a significant number of catalytic active centers. Boron nitrogen double-doped carbon (BNC) with abundant free electrons and high electron density micro-mesoporous can be used as the supported dispersion material of PtPdCu MBNSs, further catalytically enrich H2O2. Moreover, the etching vulcanization of small ZIF template and the co-doping of sulfur and nitrogen endow sulfur nitrogen co-doped hollow porous carbon (SNHC) with shorter the diffusion distance of charge carrier and lower mass transfer resistance. Under optimal conditions, the developed immunosensor exhibits good sensing performance with a detection limit of 4.27 fg⋅mL-1, and the wide linear dynamic range (10 fg⋅mL-1-100 ng⋅mL-1). This study provides a possible strategy for early diagnosis and postoperative monitoring of AMI.

Shockproof Deformable Infrared Radiation Sensors Based on a Polymeric Rubber and Organic Semiconductor H2Pc-CNT Composite.

Polymeric rubber and organic semiconductor H2Pc-CNT-composite-based surface- and sandwich-type shockproof deformable infrared radiation (IR) sensors were fabricated using a rubbing-in technique. CNT and CNT-H2Pc (30:70 wt.%) composite layers were deposited on a polymeric rubber substrate as electrodes and active layers, respectively. Under the effect of IR irradiation (0 to 3700 W/m2), the resistance and the impedance of the surface-type sensors decreased up to 1.49 and 1.36 times, respectively. In the same conditions, the resistance and the impedance of the sandwich-type sensors decreased up to 1.46 and 1.35 times, respectively. The temperature coefficients of resistance (TCR) of the surface- and sandwich-type sensors are 1.2 and 1.1, respectively. The novel ratio of the H2Pc-CNT composite ingredients and comparably high value of the TCR make the devices attractive for bolometric applications meant to measure the intensity of infrared radiation. Moreover, given their easy fabrication and low-cost materials, the fabricated devices have great potential for commercialization.

An ultra-sensitive SPR immunosensor for quantitative determination of human cartilage oligomeric matrix protein biomarker.

This paper reports the development of a novel surface plasmon resonance (SPR) immunosensor for ultra-sensitive quantitative determination of human articular cartilage oligomeric matrix protein (COMP), a major component of the extracellular matrix and an exploratory biomarker. Capture antibodies against human COMP (anti-COMP16F12) were covalently immobilized on an 11-mercaptoundecanoic acid (11-MUA) self-assembled monolayer (SAM)-coated SPR sensor disk and a dual sandwich-type signal amplification strategy using biotinylated detection antibodies against COMP (anti-COMP17C10-biot) and streptavidin-conjugated quantum dots (SAv‒QDs) were used for the development of an immunosensor. The binding of high-mass SAv‒QDs via biotin-streptavidin interaction to the surface of the immunosensor resulted in a drastic increase in the sensitivity. The developed immunosensor was able to detect concentrations of COMP in a range from 2.80 to 680.54 fM with a limit of detection (LOD) and a limit of quantification (LOQ) of 0.15 and 0.50 fM, respectively. The immunosensor exhibited good repeatability (relative standard deviation (RSD) 8.05%) and reproducibility (RSD 9.88%) as well as excellent operational stability (2.14 % decrease in SPR signal after 13 days). In addition, the analysis of secretomes of human knee articular cartilage explants from patients with osteoarthritis revealed that the immunosensor has good accuracy (analytical error less than 5 %). These results indicate that the immunosensor developed may be suitable for quantitative determination of COMP derived from articular cartilage and other synovial joint tissues in clinical studies.

Photoelectrochemical immunoassay of squamous cell carcinoma antigen based on CuO/nitrogen-doped porous carbon-ZnO biolabeling and a type-II In2O3/AgBiS2 heterojunction.

AgBiS2 was hydrothermally synthesized, In2O3 was synthesized by hydrothermal method and calcination, and the type-II In2O3/AgBiS2 heterojunction material of an optimized composition ratio was cast-coated on a fluorine-doped tin oxide (FTO) slice to fabricate an In2O3/AgBiS2/FTO photoanode. The signal-attenuated photoelectrochemistry sandwich immunoassay of squamous cell carcinoma antigen (SCCA) was realized on this photoanode, on the basis of a bovine serum albumin/secondary antibody/CuO nanoparticles/nitrogen-doped porous carbon-ZnO bionanocomposite that can competitively absorb light and deplete the electron donor ascorbic acid as well as show the steric hindrance and p-n quenching effects. Under the optimized conditions (e.g., at a bias of 0 V vs. SCE), the photocurrent was linear with the common logarithm of SCCA concentration from 2.00 pg mL-1 to 50.0 ng mL-1, with a limit of detection (LOD) of 0.62 pg mL-1 (S/N = 3). The immunoassay of SCCA in human serum samples gave satisfactory recovery (92.0~103%) and relative standard deviation (5.1~7.8%) results.

Highly sensitive detection of thyroglobulin based on sandwich-type electrochemical immunoassay.

As a dimeric protein, thyroglobulin (Tg) is an important biomarker for different thyroid cancer (DTC), so designing effective method to detect Tg is of great significance. In this work, by preparing ß-cyclodextrin (CD) functionalized carbon nanotubes (CNTs) nanohybrid (CD-CNTs) as carrier to immobilize primary antibody (Ab1) of Tg, assembling sulfydryl ferrocene (Fc) and secondary antibody (Ab2) on the surface of nanogold (Au) as signaling amplifier (Ab2-Au-Fc), a simple and sensitive sandwich-type electrochemical immunoassay (STEM) of Tg was designed herein for the first time. In brief, CNTs show large surface area and conductivity, while CD offers superior host-guest recognition capability that can bound with Ab1; meanwhile, Fc probe can offer stable electrochemical signal that is proportionable to the concentration of Tg. Under the optimum conditions, the proposed STEM platform shows excellent sensing results for Tg detection: a considerable low analytical detection (0.5 ng mL-1) and wide linearity (2 to 200 ng mL-1), suggesting the designed STEM platform offers potential real applications for detect Tg.