RESUMO
The developed asymmetric monovalent bispecific IgG1 or Duet monoclonal antibody (Duet mAb) has two distinct fragment antigen-binding region (Fab) subunits that target two different epitope specificities sequentially or simultaneously. The design features include unique engineered disulfide bridges, knob-into-hole mutations, and kappa and lambda chains to produce Duet mAbs. These make it structurally and functionally complex, so one expects challenging developability linked to instability, degradation of products and pathways, and limited reports available. Here, we have treated the product with different sources of extreme stress over a lengthy period, including varying heat, pH, photo stress, chemical oxidative stress, accelerated stress in physiological conditions, and forced glycation conditions. The effects of different stress conditions on the product were assessed using various analytical characterization tools to measure product-related substances, post-translational modifications (PTMs), structural integrity, higher-order disulfide linkages, and biological activity. The results revealed degradation products and pathways of Duet mAb. A moderate increase in size, charge, and hydrophobic variants, PTMs, including deamidation, oxidation, isomerization, and glycation were observed, with most conditions exhibiting biological activity. In addition, the characterization of fractionated charge variants, including deamidated species, showed satisfactory biological activity. This study demonstrated the prominent stability of the Duet mAb format comparable to most marketed mAbs.
RESUMO
Background: Curcumin, known for its anti-inflammatory properties, was selected for the developing consumer friendly film forming spray that offers precise delivery of curcumin and and improves patient adherence. Methods: An optimized film-forming solution was prepared by dissolving curcumin (1%), Eudragit RLPO (5%), propylene glycol (1%), and camphor (0.5%) in ethanol: acetone (20:80) as the solvent. The solution was filled in a spray container which contained 70% solutions and 30% petroleum gas. In-vitro characterization was performed. Results: Potential anti-inflammatory phytoconstituents were extracted from the PubChem database and prepared as ligands, along with receptor molecules (nsp10-nsp16), for molecular docking using Autodock Vina. The docking study showed the lowest binding energy of -8.2 kcal/mol indicates better binding affinities. The optimized formulation consisted of ethanol:acetone (20:80) as the solvent, Eudragit RLPO (5%) as the polymer, propylene glycol (1%) as the plasticizer, and camphor oil (0.5%) as the penetration enhancer. The optimized formulation exhibited pH of 5.8 ± 0.01, low viscosity, low film formation time (19.54 ± 0.78 sec), high drug content (8.243 ± 0.43 mg/mL), and extended ex vivo drug permeation (85.08 ± 0.09%) for nine hours. Consequently, the formulation was incorporated into a container using 30% liquefied petroleum gas, delivering 0.293 ± 0.08 mL per actuation, containing 1.53 ± 0.07 mg of the drug. The film-forming spray exhibited higher cumulative drug permeation (83.94 ± 0.34%) than the marketed cream formulation and pure drug solution after 9 h, with an enhancement ratio of 14. Notably, the film-forming spray exhibited no skin irritation and remained stable for over three months. Conclusions: The developed curcumin film-forming system is promising as a carrier for wound management because of its convenient administration and transport attributes. Further in vivo studies are required to validate its efficacy in wound management.
Assuntos
Curcumina , Curcumina/química , Curcumina/administração & dosagem , Curcumina/farmacologia , Humanos , Administração Tópica , Simulação de Acoplamento Molecular , Absorção CutâneaRESUMO
The Stability Study was a multicenter, pragmatic, parallel groups, randomized clinical trial comparing hamstring tendon autograft anterior cruciate ligament reconstruction with or without the addition of lateral extra-articular tenodesis in young patients at high risk of graft failure. Having recruited 618 patients with a 5% loss to follow up, we were able to demonstrate a clinically and statistically significant reduction in clinical failure and graft rupture at 2 years postoperative. No differences in patient-reported outcomes (PROs) were demonstrated between groups; however, patients who experienced an adverse event had significantly worse PROs than those who did not.
Assuntos
Lesões do Ligamento Cruzado Anterior , Reconstrução do Ligamento Cruzado Anterior , Tendões dos Músculos Isquiotibiais , Humanos , Lesões do Ligamento Cruzado Anterior/cirurgia , Reconstrução do Ligamento Cruzado Anterior/métodos , Tendões dos Músculos Isquiotibiais/transplante , Medidas de Resultados Relatados pelo Paciente , Tenodese/métodos , Transplante Autólogo , Masculino , Feminino , Adulto JovemRESUMO
For the majority of cytotoxic drug preparations, such as bortezomib, the unit dose information is not available. In addition, there is a lack of information on the physicochemical stability of the pharmaceutical preparation after opening; this information is crucial for its administration to patients in successive visits, and the per-patient cost can be affected. The purpose of our proposed physicochemical stability study is to determine the shelf life of the reconstituted liquid product under refrigeration and clinical practice conditions. This evaluation was extended to both vials and ready-to-use syringes prefilled with the contents of the open vial. The stability test design includes the specified storage conditions and the critical physicochemical parameters of reconstituted injectable bortezomib. Furthermore, this approach includes the determination of impurities, the monitoring of the purity of the mean peak using a photodiode array, the control of the mass balance, the monitoring of subvisible particles using a laser diffraction analyser, and the setting of stability specifications. For the chemical stability study, the amount of bortezomib and its degradation products were determined using a stability-indicating HPLC method. The physical inspection of the samples was performed throughout the stability study, and their pH values were also monitored. Bortezomib (2.5 mg/mL) in 0.9% sodium chloride remained stable for 7 days when stored in both polypropylene syringes and vials at 5 ± 3 °C (refrigeration) and shielded from light. Additionally, it exhibits stability for 24 h under storage conditions simulating clinical use (20-30 °C and protected from light). The proposed protocol provides the stability in the vials once reconstituted and in prefilled refrigerated syringes; this protocol can be used to reduce waste and increase cost savings.
Assuntos
Antineoplásicos , Embalagem de Medicamentos , Humanos , Bortezomib , Polipropilenos/química , Estabilidade de Medicamentos , Seringas , Cromatografia Líquida de Alta Pressão , Soluções Farmacêuticas/químicaRESUMO
Background and Objectives: The enteric form of omeprazole is one of the most commonly prescribed medications. Similarly to Europe, Kazakhstan relies on the localization of pharmaceutical drug production as one of its primary strategies to ensure that its population has access to affordable and good-quality medicines. This study comprehensively describes the technologically available development of bioequivalent delayed-release omeprazole. Materials and Methods: Various regimes and technological parameters were tested on laboratory- and production-scale equipment to establish a technical process where a functional and gastro-protective layer is essential. According to the ICH guidance on stability testing and Kazakhstan local rules, stability studies were conducted under conditions appropriate for climate zone II. The comparison of the rate and extent of absorption with subsequent assessment of the bioequivalence of the generic and reference drugs after a single dose of each drug at a dose of 40 mg was performed. Results: The quantitative and qualitative composition and technology of producing a new generic enteric form of omeprazole in capsules were developed and implemented at the manufacturing site of solid forms. Dissolution profiles in media with pH 1.2 and 6.8 were proven. During the accelerated six-month and long-term twelve-month studies, the developed formulation in both packaging materials at each control point passed the average weight and mass uniformity test, dissolution test, acid-resistance stage test, buffer stage test, impurity assay, and microbiological purity test and met all the specification criteria. A bioequivalence study in 24 healthy volunteers compared against the innovative drug showed the bioequivalency of the new generic system. The obtained values from the test and reference products were 1321 ± 249.0 ng/mL and 1274 ± 233 ng/mL for Cmax, 4521 ± 841 ng·h /mL and 4371 ± 695 ng·h /mL for AUC0-t, and 4636 ± 814 ng·h /mL and 4502 ± 640 ng·h /mL for AUC0-∞. Conclusions: Using affordable technologies, a bioequivalent generic delayed-release formulation of 20 and 40 mg omeprazole has been developed.
Assuntos
Omeprazol , Humanos , Omeprazol/química , Equivalência Terapêutica , Cápsulas , Estudos Cross-Over , Europa (Continente)RESUMO
In preparation to the launch of a pharmaceutical product, an estimate of its shelf life via stability testing is required by regulatory agencies. The ICH-Q1E guidance has been the worldwide reference to reach this objective, but in recent years several authors have criticized many of its aspects. To that end we discuss a complete Bayesian transcript of the ICH-Q1E, treating all the apparent shortcomings, while also addressing the presence of multiple batches using a linear mixed model (LMM) for proper shelf life prediction by explicitly modelling the batch-to-batch variability. This comprises a redefinition of the linear models proposed in the ICH-Q1E by suitable LMM counterparts, and a Bayesian analogue for model selection, which is more intuitive and remedies detrimental features of the ICH approach. In that context, a proper mathematical foundation of shelf life is provided that we use to investigate and mathematically compare the two available approaches to shelf life determination via shelf life distribution and batch distribution. The discussed method is then tested and evaluated using real data in comparison with the ICH-Q1E approach demonstrating their approximate equivalency for 6 batches. As a major objective, we extended the LMM with auxiliary fixed effects, here the concentration, which interconnect data sets allowing a prediction of shelf lives for concentrations lacking a sufficient number of batches. This establishes a novel approach to accelerate the speed to submission while retaining the patients' safety. Both case studies underline the inherent superiority of LMMs within a Bayesian framework regarding predictability and interpretability, and we hope that the relevant authorities will accept this approach in the future.
Assuntos
Teorema de Bayes , Estabilidade de Medicamentos , Modelos Lineares , Armazenamento de Medicamentos , Preparações Farmacêuticas/químicaRESUMO
Multicomponent drugs are medications that combine two or more active pharmaceutical ingredients in a single dosage form. These dosage forms improve the patient compliance, reduce the risk of drug interactions, and simplify dosing regimens. However, quality control of these multicomponent dosage forms can be challenging, especially if the final product contains four or more ingredients that are active (comprise stabilizers, preservatives, excipients, and other components). This problem can be more pronounced if the excipients can interfere with the analysis. In this work, a stability indicating assay method was developed and validated (according to the ICH International Guidelines) for the simultaneous determination of hydroquinone (HQ), tretinoin (TRT), hydrocortisone (HCA), butylated hydroxytoluene (BHT), methyl paraben (MP) and propyl paraben (PP) in commercially available pharmaceutical creams. The proposed method is based on gradient elution using X-Bridge C18 (150 × 4.6 mm, 5 µm) column with a flow rate of 1 mL/min. The linear ranges (µg/mL) were 240-560 for HQ, 24-56 for MP, 132-308 for HCA, 6-14 for PP, 12-28 for BHT, 6.6-15 for TRT. During the validation process, the intra- and interday precision and trueness (evaluated as recovery) were found to be below 2.0% and between 100-102%, respectively. System suitability tests (SST) allow validating the herein proposed procedure specifically for pharmaceutical and industrial applications. SST test shows that the reported procedure fulfill with the Guidelines, allowing excellent separation of the analytes with very sensitive, accurate (precise and true) and reproducible quantitation of each analytes. The method was successfully applied in forced degradation studies of the six analytes. Specifically, acid degradation slightly affected HCA and BHT (91% recovery), while alkaline degradation drastically reduced HCA recovery (5.5%) and moderately affected BHT (85%). Photodegradation primarily influenced TRT quantity, and oxidative degradation intensified the BHT peak (130%).
Assuntos
Parabenos , Tretinoína , Humanos , Parabenos/análise , Tretinoína/análise , Hidrocortisona/análise , Hidroxitolueno Butilado , Excipientes , Cromatografia Líquida de Alta Pressão/métodos , Hidroquinonas/análiseRESUMO
Alzheimer's disease (AD) is a very common disorder that affects the elderly. There are relatively few medications that can be used orally or as a suspension to treat AD. A mucoadhesive (o/w) nano emulsion of mefenamic acid was made by adding Carbopol 940P to the optimised drug nanoemulsion using distilled water as the aqueous phase (6%); Solutol HS: tween 20 (3.6%) as the surfactant and co-surfactant; and clove oil: TPGS (0.4%) as the oil phase and mefenamic acid as the drug (2.8 mg/ml). The mucoadhesive nanoemulsion (S40.5%w/v) had a particle size of 91.20 nm, polydispersity index of 0.270, and surface charge of - 12.4 mV. Significantly higher (p < 0.001) drug release (89.37%) was observed for mucoadhesive drug formulation in comparison to mucoadhesive drug suspension (25.64%) at 8 h. The ex vivo nasal permeation of 83.03% in simulated nasal fluid and 85.71% in artificial cerebrospinal fluid was observed. The percent inhibition and inhibitory concentration (IC50) of mucoadhesive drug nanoemulsion were found to be 91.57 ± 2.69 and 6.76 respectively. Higher cell viability on glioblastoma cells (85-80%) was researched for mucoadhesive nanoemulsion as compared to drug suspension (80-70%). Significantly higher (p < 0.001) drug absorption and Cmax (491.94 ± 24.13 ng/ml) of mucoadhesive drug nanoemulsion were observed than mucoadhesive drug suspension (107.46 ± 11.46 ng/ml) at 8 h. The stability studies confirmed that the formulation was stable at 40°C ± 2°C and 75 ± 5% RH. The authors concluded that the mucoadhesive mefenamic acid-loaded nanoemulsion may be an effective technique for treating Alzheimer's disease by intranasal route.
Assuntos
Doença de Alzheimer , Ácido Mefenâmico , Vitamina E , Humanos , Idoso , Condutos Olfatórios , Doença de Alzheimer/tratamento farmacológico , Encéfalo , TensoativosRESUMO
Grapevine roots, as a side-stream of a vineyard, are a sustainable resource for the recovery of oligomeric stilbenoids, such as the bioactive r-viniferin. The aim of this study is to evaluate an in silico-supported method, based on the Conductor-like Screening Model for Real Solvents (COSMO-RS), for selection of environmentally friendly natural deep eutectic solvents (NADES) with regard to the extraction of grapevine roots. The most suitable NADES system for ultrasonic-assisted extraction of r-viniferin was choline chloride/1,2-propanediol. The optimal extraction parameters for r-viniferin were determined using single-factor experiments as follows: choline chloride/1,2-propanediol 1/2 mol/mol, 10 wt% H2O, biomass/NADES ratio 1/10 g/g, and 10 min extraction time. Under optimized conditions, the extraction yield of r-viniferin from grapevine roots reached 76% of the total r-viniferin content. Regarding stability, stilbenoids in choline chloride/1,2-propanediol remained stable during 128 days of storage at ambient temperature. However, fructose/lactic acid-based NADES were observed to degrade stilbenoids; therefore, the removal of the NADES will be of interest, with a suitable method implemented using Amberlite® XAD-16N resin. As green solvents, the NADES have been used as effective and environmentally friendly extractants of stilbenoid-containing extracts from grapevine roots for potential applications in the cosmetic and pharmaceutical industry or as nutraceuticals in the food industry.
RESUMO
Solid Oxide Fuel Cell (SOFC) cathodes operating in ambient atmospheric conditions inevitably encounter CO2 contamination, leading to sustained performance deterioration. In this investigation, we examined the impact of CO2 on three variants of (La,Sr)(Co,Fe)O3-δ cathodes and employed the distribution of relaxation times method to distinguish distinct electrochemical processes based on impedance spectra analysis. We meticulously analyzed and discussed the corrosion resistance of these (La,Sr)(Co,Fe)O3-δ cathodes under high CO2 concentrations, relying on the experimental data. Electrochemical impedance spectroscopy results revealed that La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF-6428), La0.4Sr0.6Co0.2Fe0.8O3-δ (LSCF-4628), and La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN-46271) cathodes exhibited persistent degradation when exposed to CO2 at temperatures of 650 °C or 800 °C during the durability-testing period. An increase in electrode polarization resistance was observed upon CO2 introduction to the electrode, but electrode performance recovered upon returning to a pure air environment. Furthermore, X-ray diffraction and scanning electron microscopy analyses confirmed that CO2 did not cause permanent damage to the (La,Sr)(Co,Fe)O3-δ cathodes. These findings indicate that the (La,Sr)(Co,Fe)O3-δ cathodes exhibit excellent resistance to CO2-induced corrosion.
RESUMO
Polyethylene glycol (PEG) was introduced into synthetic bilirubin 3α and a PEGylated bilirubin 3α nanoparticle (BX-001N, Brixelle®) was developed for the first time.An in vitro microsomal stability study, in vivo PK studies with intravenous bolus (IV) and subcutaneous injection (SC), and a semi-mass balance study of BX-001N were investigated to evaluate its pharmacokinetic (PK) properties in male Sprague-Dawley (SD) rats using developed liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-qTOF/MS).Following IV administration at 10 or 30 mg/kg, BX-001N showed very low clearance (0.33-0.67 mL/min/kg) with predominant distribution in the vascular system (Vd = 51.73-83.02 mL/kg). BX-001N was also very stable in vitro liver microsomal stability study.Following SC administration at 10 or 30 mg/kg, the bioavailability of BX-001N in plasma at 10 mg/kg was around 43% and showed the less dose-proportionality at 30 mg/kg dose.BX-001N was mainly excreted via the urinary pathway (86.59-92.99% of total amount of parent drug in excreta; urine and feces) not via the biliary one.
RESUMO
A reliable method using a QuEChERS approach and liquid chromatography coupled to Q-Orbitrap mass spectrometry was optimized and validated for the quantification of 20 growth promoters in bovine serum. The recoveries ranged from 91.4-114.1%, relative standard deviations varied between 0.3-4.0%, and CCα values were between 0.023-0.350 µg L-1. The developed method was applied in an in vivo study using steers, which were intramuscularly treated with commercial injections containing stanozolol. A rapid metabolization was observed, with a detection window ranging from 3 to 10 days. The stability of incurred stanozolol was confirmed after 240 days at -20 °C and also after 5 freeze-thaw cycles. To the best of our knowledge, this is the first work in which an in vivo study was performed to support the monitoring of stanozolol in bovine serum. In addition, the use of Q-Orbitrap high-resolution mass spectrometry allows for retrospective analysis from a surveillance perspective.
Assuntos
Estanozolol , Cromatografia Líquida de Alta Pressão/métodos , Estudos Retrospectivos , Espectrometria de Massas/métodos , Cromatografia LíquidaRESUMO
Economical, highly robust, selective, precise, and eco-friendly RP-UPLC and spectrophotometric methods were developed and validated for the concurrent estimation of selected pharmaceutical drugs represented in ceftazidime (CFZ) and pyridine (PYD) in their solutions using Agilent Zorbax SB-C18 RRHD (50 × 2.1 mm, 1.8 µm) column at flow rate 0.3 mL/min with wavelength 254 nm. Box-Behnken design (BBD) established Response surface methodology (RSM) to achieve the optimum chromatographic condition with minimal trials conducted. Three independent variables specifically acetonitrile ratio 60-70%, pH 3-7, and temperature 25-35 °C were implemented to evaluate the influences of these variables on the responses as resolution and retention time. Desirability and overlay plots were carried out to adjust the optimal condition that achieved the shortest retention time of less than 2 min and desired resolution of more than 1.5 using a mobile phase consisting of acetonitrile: purified water (70:30, v/v) at pH 5.0 adjusted by 0.1% orthophosphoric acid with the column oven temperature 30 °C and column void volume 0.46 mL. Mean centering of ratio spectra (MCR) and ratio subtraction (RS) methods were effectively applied to resolve drugs' spectral superposition at 220 nm, 255.4 nm, 260.3 nm, and 254.6 nm for CFZ and PYD, respectively. Linearity range was accomplished for UPLC, MCR, and RS methods over the concentration range of 2-100, 1-50,3-30 and 5-30 µg/mL for CFZ and PYD, respectively with correlation coefficient > 0.999 and good recovery results within 98-102%. Six Sigma methodology was achieved using the process capability index (Cpk) to compare the suggested and USP methods showing that both are highly capable with Cpk > 1.33. The proposed method was successfully validated depending on ICH guidelines and ANOVA results and applied for the accelerated stability study.
RESUMO
BACKGROUND: Research proved that coenzyme Q10-loaded NLC effectively removes skin wrinkles, therefore, such a formulation with good characteristics is still the research goal. OBJECTIVE: This study investigated the effect of solid lipids and surfactant type on the physical characteristics of Q10-NLC. We aimed to achieve the optimum formulation for producing NLC with long-term stability and high Entrapment efficiency (E.E.) %. We compared the experimental results with the output of the Molecular dynamic (M.D.) simulations. METHODS: To develop Q10-NLC, various solid lipids, MCT oil, and surfactants were employed. The formulations were prepared by high-shear homogenization and ultrasound methods. Stability studies were carried out 1,3, and 6 months at 4, 25, and 40°C. The optimized NLC formulations were characterized by photon correlation spectroscopy (PCS), Transmission electron microscopy (TEM), Differential scanning calorimetry (DSC), and Fourier transform infrared (FT-IR). E.E. % was determined by HPLC analysis. Atomistic M.D. simulations of two model systems were performed to gain insights into the self-assembled process of co-Q10 with other formulation components. RESULTS: Statistical analysis (Two-way ANOVA) revealed that solid lipid and surfactant factors had a significant influence on particle size, PDI, and zeta potential (***p < 0.0001). According to the results, F1 and F6 formulations had desirable surface characterizations, physicochemical stability, and high E.E. %. The atomistic M.D. simulations confirmed that the F1 system (best) was more stable than the F31 system (worst). CONCLUSION: The solid lipids: tripalmitin and compritol, stabilized with 4% tween 80 and 1% span 80, have produced stable NLC with the best surface characteristics that could be a promising formulation for the delivery of Q10. Atomistic M.D. simulation has confirmed the stability of F1 in comparison to F31.
Assuntos
Simulação de Dinâmica Molecular , Tensoativos , Humanos , Espectroscopia de Infravermelho com Transformada de Fourier , LipídeosRESUMO
Recently, mirabegron has been added to tamsulosin to treat overactive bladder in men with benign prostatic hypertrophy. A Rapid, selective, sensitive, and green high-performance thin-layer chromatography (HPTLC) approach was developed for the simultaneous determination of tamsulosin (TAM) and mirabegron (MIR) in pure and laboratory-prepared mixture. Complete separation was obtained on silica gel F254 using the solvent system methanol-ethyl acetate-ammonia (3:7:0.1, v/v). Short-wave ultraviolet light at 270 nm was used to view the chromatographic bands. For MIR and TAM, the suggested technique revealed compact spots with retention factor Rf values of 0.42 and 0.63, respectively. Within concentration ranges of 0.15-7.5 µg/band and 0.05-2.5 µg/band, good linearity was observed, with mean percentage recoveries of 100.04 ± 0.56 and 99.98% ± 0.95 for MIR and TAM, respectively. Green assessment of the developed HPTLC technique was estimated using different green analytical chemistry metrics such as Analytical eco-scale Analytical GREEness (AGREE), and Green Analytical Procedure Index (GAPI) metrics. The proposed method was effectively used as a stability-indicating assay to assess the presence of MIR and TAM in the pharmaceutical dosage form in the presence of their degradation product. The statistical analysis showed high precision and accuracy.
RESUMO
Ascorbic acid (AA) has many health benefits, including immune and cardiovascular deficiency protection, prenatal problems, and skin diseases. Unfortunately, AA is easily oxidized and has limited bioavailability. Thus, the development of formulations that stabilize and enhance the efficacy of AA is a challenge. In this study, 4% AA was encapsulated in two recently developed gels, a hydrogel and a bigel. The hydrogel was formed exclusively with lipids and water, and the bigel was a combination of the hydrogel with an oleogel formed with olive oil and beeswax. The effect of AA in gel microstructures was determined using X-ray scattering, rheology, and texture analysis. Additionally, the capacity of these materials to protect AA from degradation upon temperature and sunlight was studied. Results showed that the incorporation of AA into both materials did not affect their microstructure. Moreover, hydrogel-protected AA showed only 2% degradation after three months at 8 °C, while in aqueous solution, it degraded by 12%. Regarding sunlight, bigel showed a good shielding effect, exhibiting only 2% AA degradation after 22 h of exposure, whereas in aqueous solution, AA degraded by 10%. These results suggest that both proposed gels could be used in biomedical applications and the field of food.
RESUMO
Meningococcal A Conjugate Vaccine (MenAfriVac) is the world's first Monovalent Conjugate Vaccine against Neisseria Meningitidis serogroup A which has obtained Controlled Temperature Chain (CTC) label claim of "stable upto 40°C for 4 days prior to reconstitution" developed by Serum Institute of India Pvt. Ltd. Pune, India and the vaccine was granted permission from World health Organization. This paper elucidates and talks about the layout of various studies performed to characterize the product to declare as CTC at the time when the knowledge and mechanism to describe CTC was not fully known which in term helped to design the CTC guidelines. Product stability was assessed using clinical, consistency and regular lots released by NRA. The critical stability indicating parameters like free polysaccharide, molecular size distribution along with Potency and safety tests were carried out to support the product stability making sure it also qualifies for Vaccine Vial Monitor label claim of VVM30. An additional in use stability (reconstitution) was also performed. All studies indicated that the product remains stable at real time as well as elevated temperatures and well within the specifications approved by NRA and formed the strong basis for CTC claim which is now recommended by WHO.
Assuntos
Vacinas Meningocócicas , Neisseria meningitidis , Vacinas Conjugadas , Temperatura , Índia , Vacinas CombinadasRESUMO
BACKGROUND: Herbal drugs when used in combination with chemotherapeutic drugs can reduce the side effects and increase the efficacy by acting on multiple targets. Andrographolide (AG), a diterpene lactone isolated from Andrographis paniculata Nees, is a bioactive compound with anticancer potential, and 5-fluorouracil (FU), a pyrimidine analogue, is used in the treatment of cancer. Both drugs are used to formulate combination nanoformulation to increase absorption, thereby increasing their oral bioavailability. OBJECTIVE: The study aimed to develop and validate stability indicating simultaneous HPTLC method for quantification of FU and AG in combination nanoformulation along with in silico docking and network pharmacology analysis to understand the interaction between the drugs and cancer targets. METHODS: Chromatographic separation was performed using mobile phase chloroform: methanol: formic acid (9: 0.5: 0.5, v/v/v) on HPTLC silica plates 60 F254 as a stationary phase using UV-Vis detector and HPTLC scanner at 254 nm. Further, in silico docking analysis was performed to predict the binding affinity of AG and FU with different proteins and network pharmacology to find out the exact biomolecular relationship of AG and FU in alleviating cancer. RESULTS: The data from the calibration curve showed a good linear regression relationship with r² = 0.9981 (FU) and r² = 0.9977 (AG) in the concentration range of 0.1-2.0 µg/mL. The developed method was validated according to the ICH guidelines. Stability studies showed changes in peak patterns and areas. Bioinformatic and network pharmacology analyses of AG and FU with target proteins and genes associated with cancer play a multimechanistic role in alleviating cancer. CONCLUSION: The developed method has been concluded to be robust, simple, precise, reproducible, accurate, and stability indicating for simultaneous quantification of AG and FU, and the molecular interaction studies have further indicated that the combination nanoformulation of AG and FU could be effective against cancer.
RESUMO
Drug-excipient compatibility study (DECS) is one of the critical steps during pre-formulation studies to select the appropriate excipient to obtain a stable formulation/dosage form. As such, there is no recommended guideline for DECS. Further, the previously reported studies and protocols followed by various pharmaceutical industries are very lengthy and laborious. Therefore, to improve the existing study strategies and rapid screening of suitable excipients during formulation development, a novel vial-in-vial approach has been proposed. The devised approach was compared with the previously reported conventional approaches using six different drugs with multiple marketed formulations from different manufacturers for each drug. To validate the proposed novel approach, several reported strategies/methodologies have been executed such as exposure of formulations with and without primary packaging, crushed blend with and without water, and/or acetonitrile at accelerated stability condition of 40°C/75% RH for 3 to 6 months and compared with the novel approach. Eventually, all the samples were subjected to HPLC analysis to evaluate the degradation behaviour. The results suggested that the novel approach demonstrated discriminating results with significant degradation as compared to the conventional approaches. Consequently, exercising this methodology for screening the excipients is expected to shorten the drug development cycle by many folds. Moreover, it has also been anticipated that the developed novel approach would prevent the occurrence of late-stage surprises during stability studies.
Assuntos
Benchmarking , Excipientes , Cromatografia Líquida de Alta Pressão , Desenvolvimento de Medicamentos , Indústria FarmacêuticaRESUMO
During the early months of the COVID-19 pandemic, the international medical product supply chain was tight, causing breaks in the availability of neuromuscular blocking agents essential for the treatment of patients in intensive care units. The present study describes the pharmaceutical development of an injectable 2 mg/mL solution of pancuronium bromide (PC) in a very short lapse of time. The sterile solution was compounded into a good manufacturing practice grade A clean room, filtered (0.2 µm) and filled into 10 mL type I glass, manually sealed with bromobutyl rubber stoppers. A novel HPLC-MS stability indicating method for pancuronium quantification and its degradation product was developed and validated. This fast, sensitive and straightforward method was used to study the stability of the formulation using a semi-predictive method, enabling a very fast attribution of a temporary shelf-life, which was confirmed by a classic prospective stability study. The production line and the analytical tools set-up were performed in six weeks and the semi-predictive stability study was conducted in 90 days, allowing us to predict a shelf life, which was successfully confirmed by prospective study. In conclusion, using innovative methods, we were able to rapidly overcome the shortage of a critical drug.