Accuracy of computer-guided implant surgery in partially edentulous patients: a prospective observational study.

PURPOSE: This study aims to evaluate the amount of distortion using computer-guided implant surgery with 3D printed surgical guides in limited edentulous spaces. MATERIALS AND METHODS: 25 bone level self-tapping implants (Straumann® BL and BLT) were randomly inserted in either distal or intercalary posterior mandibular edentulism using a fully digital protocol and 3D printed surgical guides. Amount of inaccuracy was evaluated after superimposing the 3 coordinates of virtually planned and final implant images, which were obtained using intra-oral scans and scan bodies. Four evaluation parameters were considered: origo-displacement, error depth, apical displacement and angle between the planned and the placed implant. RESULTS: The average of distortion was 0.71 mm for the origo-displacement, 0.36 mm for the error depth, 0.52 mm for the horizontal displacement and 3.34º for the error angle. CONCLUSION: The major reason of exclusion was CBCT artifacts. Results of this study were aligned with the results of previous studies concerning partially edentulous spaces. CAD/CAM manufacturing process did not result in significant distortion whilst the biggest part of distortions originated from the surgical process. The learning curve in computer-guided implant surgery presented an important source of inaccuracy.

A New Method to Design and Manufacture a Low-Cost Custom-Made Template for Mandible Cut and Repositioning Using Standard Plates in BSSO Surgery.

In this study, a new methodology for designing and creating a custom-made template for maxillofacial surgery has been developed. The custom-made template can be used both for cutting and repositioning of the mandible arches for executing a BSSO (bilateral sagittal split osteotomy) treatment. The idea was developed in order to give the possibility of using a custom-made template with standard plates, thus reducing long times, high costs and low availability of custom-made plates; this represents the proof of novelty of the proposed template, based on a well-established methodology. The methodology was completely developed in the CAD virtual environment and, after the surgeons' assessment, an in-vitro experiment by a maxillofacial surgeon was performed in order to check the usability and the versatility of the system, thanks to the use of additive manufacturing technologies. When computer-aided technologies are used for orthognathic surgery, there are significant time and cost savings that can be realised, as well as improved performance. The cost of the whole operation is lower than the standard one, thanks to the use of standard plates. To carry out the procedures, the proposed methodology allows for inexpensive physical mock-ups that enable the BSSO procedure to be performed.

Computer-assisted open exposure of palatally impacted canines for orthodontic eruption: A randomized clinical trial.

OBJECTIVE: This randomized clinical trial aimed to assess the feasibility of computer-assisted open exposure of palatally impacted canines. MATERIALS AND METHODS: Patients aged 11-30 years who required orthodontic eruption for the full palatal impaction of their canines were included in this study. Exclusion criteria were psychosocial and dental contraindications of orthodontic treatment, congenital craniofacial disorders, and trauma in the patient's history in the vicinity of the surgical site. Virtual planning software was used to register the intraoral scans and cone-beam computed tomography data and to design a surgical template. In the test group, exposure of the canines was guided by a surgical template, whereas in the control group, the surgeon relied on the surgical plan to localize the impacted canine. The success of the intervention, duration of surgery, and complications, including excessive hemorrhage, damage to the canine or neighboring anatomical landmarks, and postoperative inflammation of the surgical site were assessed. Postoperative pain was reported by the patients using the visual analog pain scale (VAS). RESULTS: Surgery was deemed successful in all patients in both groups. During healing, no complications were observed. The duration of surgery decreased significantly in the test group (4 min 45.1 s ± 1 min 8.4 s) compared to that in the control group (7 min 22.3 s ± 56.02 s). No statistically significant differences were observed between the VAS scores of the two study groups. CONCLUSIONS: The application of virtual planning and static navigation is a viable approach for the open exposure of palatally impacted canines. CLINICAL TRIAL REGISTRATION NUMBER: NCT05909254. CLINICAL SIGNIFICANCE: Computer-assisted surgery is a feasible method for open exposure of palatally impacted canines, which decreases the duration of surgery compared to the freehand method.

The three-dimensional stability and accuracy of 3D printing surgical templates: An In Vitro study.

OBJECTIVE: To evaluate the three-dimensional (3D) stability and accuracy of additively manufactured surgical templates fabricated using two different 3D printers and materials. MATERIALS AND METHODS: Forty surgical templates were designed and printed using two different 3D printers: the resin group (n = 20) used a digital light processing (DLP) 3D printer with photopolymer resin, and the metal group (n = 20) employed a selective laser melting (SLM) 3D printer with titanium alloy. All surgical templates were scanned immediately after production and re-digitalized after one month of storage. Similarly, the implant simulations were performed twice. Three-dimensional congruency between the original design and the manufactured surgical templates was quantified using the root mean square (RMS), and the definitive and planned implant positions were determined and compared. RESULTS: At the postproduction stage, the metal templates exhibited higher accuracy than the resin templates (p < 0.001), and these differences persisted after one month of storage (p < 0.001). The resin templates demonstrated a significant decrease in three-dimensional stability after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05). No significant differences in implant accuracy were found between the two groups. However, the resin templates showed a significant increase in apical and angular deviations after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05). CONCLUSION: Printed metal templates showed higher fabrication accuracy than printed resin templates. The three-dimensional stability and implant accuracy of printed metal templates remained unaffected by one month of storage. CLINICAL SIGNIFICANCE: With superior three-dimensional stability and acceptable implant accuracy, printed metal templates can be considered a viable alternative technique for guided surgery.

A user-friendly system for identifying the optimal insertion direction and to choose the best pedicle screws for patient-specific spine surgery.

Background and objective: Many diseases of the spine require surgical treatments that are currently performed based on the experience of the surgeon. The basis of this study is to deliver an automatic and patient-specific algorithm able to come to the aid of the surgeons in pedicle arthrodesis operations, by finding the optimal direction of the screw insertion, the maximum screw diameter and the maximum screw length. Results: The paper introduce an algorithm based on the reconstructed geometry of a vertebra by 3D-scan that is able to identify the best introduction direction for screw and to select, from commercial and/or personalised databases, the best screws in order to maximize the occupation of the bone while not intersecting each other and not going through the walls of the pedicle and the bounds of the vertebral body. In fact, for pedicle arthrodesis surgery, the incorrect positioning of the screws may cause operating failures, an increase in the overall duration of surgery and, therefore, more harmful, real-time X-ray checks. In case of not availability on market, the algorithm also suggests parameters for designing and manufacturing an 'ad hoc' solution. The algorithm has been tested on 6 vertebras extracted by a medical database. Furthermore, the algorithm is based on a procedure through which the surgeon can freely choose the entering point of the screw (based on his/her own experience and will). A real patient vertebra has been processed with almost 400 different entering point, always giving a feedback on the possibility to use the entering point (in case of unavailability of a good trajectory) and on the individuation of the right trajectory and the choose of the better screws. Conclusions: In very recent bibliography, several papers deal with procedure to screw' trajectory planning in arthrodesis surgery by using Computer Aided surgery systems, and some of them used also modern methodologies (KBE, AI, Deep learning, etc.) methods for planning the surgery as better as possible. Nevertheless, no methodologies or algorithm have been still realized to plan the trajectory and choose the perfect fitting screws on the basis of the patient-specific vertebra. This paper represents a wind of novelty in this field and allow surgeons to use the proposed algorithm for planning their surgeries. Finally, it allows also the easy creation of a customized surgical template, characterized by two cylindrical guides that follow a correct trajectory previously calculated by means of that automatic algorithm generated on the basis of a vertebra CAD model for a specific patient. The surgeon will be able to set the template (drilling guides) on the patient's vertebra and safely apply the screws.

Computer Aided Full Arch Restoration by Means of One-Piece Implants and Stackable Guide: A Technical Note.

This technical note aims to present a recently developed computer-guided protocol characterized by titanium-reinforced stackable surgical guides during post-extractive implant placement and subsequent immediate loading. A full maxillary edentulism was rehabilitated with one-piece implants, starting from a pre-existing removable denture. 3D digital scans of the removable denture and upper and lower arches were performed. On this basis, a prototype with ideal esthetic and functional outcomes was realized and replicated into a custom-made radiological stent with markers. The superimposition of STL and DICOM files allowed virtual planning of one-piece implants in the ideal prosthetically driven position. The stackable guides, composed of a fixed base template and additional removable components, were then realized. The fixed template, initially secured with anchor pins to the bone, was no longer removed. The removable components, which were screwed to the base template, were used to perform implant surgery and immediate prosthetic loading. No surgical complications occurred, the implants achieved a minimum insertion torque of 35 Ncm, and immediate prosthetic loading was performed. The base template allowed for the maintenance of a fixed reference during the entire workflow, improving the transition between the digital project, the surgical procedure, and the prosthetic rehabilitation.

Accuracy of Palatal Orthodontic Mini-Implants Placed Using Fully Digital Planned Insertion Guides: A Cadaver Study.

Digital workflows have become integral in orthodontic diagnosis and therapy, reducing risk factors and chair time with one-visit protocols. This study assessed the transfer accuracy of fully digital planned insertion guides for orthodontic mini-implants (OMIs) compared with freehanded insertion. Cone-beam computed tomography (CBCT) datasets and intraoral surface scans of 32 cadaver maxillae were used to place 64 miniscrews in the anterior palate. Three groups were formed, two using printed insertion guides (A and B) and one with freehand insertion (C). Group A used commercially available customized surgical templates and Group B in-house planned and fabricated insertion guides. Postoperative CBCT datasets were superimposed with the planning model, and accuracy measurements were performed using orthodontic software. Statistical differences were found for transverse angular deviations (4.81° in A vs. 12.66° in B and 5.02° in C, p = 0.003) and sagittal angular deviations (2.26° in A vs. 2.20° in B and 5.34° in C, p = 0.007). However, accurate insertion depth was not achieved in either guide group; Group A insertion was too shallow (-0.17 mm), whereas Group B insertion was deeper (+0.65 mm) than planned. Outsourcing the planning and fabrication of computer-aided design and computer-aided manufacturing insertion guides may be beneficial for certain indications; particularly, in this study, commercial templates demonstrated superior accuracy than our in-house-fabricated insertion guides.

Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Auricular Prostheses-Systematic Review.

This systematic review was aimed at gathering the clinical and technical applications of CAD/CAM technology for craniofacial implant placement and processing of auricular prostheses based on clinical cases. According to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines, an electronic data search was performed. Human clinical studies utilizing digital planning, designing, and printing systems for craniofacial implant placement and processing of auricular prostheses for prosthetic rehabilitation of auricular defects were included. Following a data search, a total of 36 clinical human studies were included, which were digitally planned and executed through various virtual software to rehabilitate auricular defects. Preoperative data were collected mainly through computed tomography scans (CT scans) (55 cases); meanwhile, the most common laser scanners were the 3dMDface System (3dMD LLC, Atlanta, Georgia, USA) (6 cases) and the 3 Shape scanner (3 Shape, Copenhagen, Denmark) (6 cases). The most common digital design software are Mimics Software (Mimics Innovation Suite, Materialize, Leuven, Belgium) (18 cases), Freeform software (Freeform, NC, USA) (13 cases), and 3 Shape software (3 Shape, Copenhagen, Denmark) (12 cases). Surgical templates were designed and utilized in 35 cases to place 88 craniofacial implants in auricular defect areas. The most common craniofacial implants were Vistafix craniofacial implants (Entific Medical Systems, Goteborg, Sweden) in 22 cases. A surgical navigation system was used to place 20 craniofacial implants in the mastoid bone. Digital applications of CAD/CAM technology include, but are not limited to, study models, mirrored replicas of intact ears, molds, retentive attachments, customized implants, substructures, and silicone prostheses. The included studies demonstrated a predictable clinical outcome, reduced the patient's visits, and completed the prosthetic rehabilitation in reasonable time and at reasonable cost. However, equipment costs and trained technical staff were highlighted as possible limitations to the use of CAD/CAM systems.

The use of surgical template for palatal fistula repair in cleft palate using tongue flap: 3 case report.

INTRODUCTION AND IMPORTANCE: The occurrence of a palatal fistula after surgical correction in a cleft palate patient is the most common complication in cleft palate surgery. This condition might be due to poor tissue quality and vascularity, an error in the surgical technique, the size of the defect, the age of the patient, and infection. CASE PRESENTATION: Three patients with fistula in the anterior and mid-palate regions asked for correction. In past history, all cases had received multiple surgical corrections, and the result showed with recurrent fistula. DISCUSSION: Surgical interventions for correction of palatal fistula might be difficult as the surrounding tissue has lost its quality, especially in secondary surgery or after multiple surgical interventions. Flap taken from the tongue can be chosen as an alternative source to close the fistula based on the consideration that the tongue has a favourable position, and located as the nearest tissue directly opposite to the palatal region, and has good vascularity. The aim of this report is to show the advantages of the use a surgical template made from alumina foil to measure the size and shape of the flap in accordance with the form and size of existed fistula. The surgical template was used as a guidance during drawn the design of the flap on the surface of the tongue. CONCLUSION: The use of surgical templates was very useful as guidance during the marking procedure on the surface of the tongue for designing an individual tongue flap form.

[The role of 3D technology in the support of mechanical circulation therapy.] / A 3D technológia szerepe a muszívterápiában.

INTRODUCTION: Successful mechanical circulatory support is influenced by various factors, which are difficult or impossible to control. For ideal functioning of the left ventricular assist device inflow-cannula, its axis should be close to parallel with the septum, facing the mitral valve within the left ventricle. Numerous international publications discuss that deviation from optimal implantation can lead to inadequate functioning and serious complications. OBJECTIVE: Our objective was to developing a method, which, using 3D technology, anatomical and hydrodynamic data, makes optimal surgical implantation of the left ventricular assist device possible. METHOD: Data of 57 patients, receiving mechanical circulatory support at Semmelweis University, Heart and Vascular Center, were analyzed retrospectively. Results of operations performed with the patented novel navigation device (exoskeleton) were compared with results of operations performed conventionally, without navigation (control group). Following pairing based on estimated participation probability, postoperative data of 7-7 patients were compared. DICOM files from CT angiography images were used to create virtual geometries of individual hearts. Optimal inflow-cannula angle was determined through hydrodynamic simulation. Exoskeletons were printed using synthetic resin suitable for surgical purposes. Exoskeleton templates guided punch knife positioning and inflow-cannula implantation. RESULTS: Evaluation of postoperative CT angiography images showed that the angle between inflow-cannula and interventricular septum significantly differed in the exoskeleton and control groups (10.13° ± 2.69° vs. 22.87° ± 12.38°, p = 0.0208). Hydrodynamic tests found significantly lower turbulence in the exoskeleton group. Simulated turbulent kinetic energy was significantly lower in the exoskeleton group, which was 11.7 m2/s2 ± 9.39 m2/s2 vs. 49.59 m2/s2 ± 7.61 m2/s2 on average. CONCLUSION: The results suggest left ventricular assist device implantation with patented exoskeleton to be a standardizable, safe and effective method. Preliminary results suggest, that the method may facilitate individualized care, reduce surgical time and incidence of serious complications. Orv Hetil. 2023; 164(26): 1026-1033.

Can computer-guided surgery help orthodontics in miniscrew insertion and corticotomies? A narrative review.

Orthodontics has considerably increased the use of technology combined with surgery as a tool to improve dental movements in terms of predictability, acceleration of movement, and fewer side effects. To achieve these goals miniscrews and corticotomy were introduced. The digital workflow permits an increase in the accuracy of surgical and orthodontic setups. The tool that transfers the information is the CAD/CAM (Computer-Aided Design/ Computer-Aided Manufacturing) template. The aim of this review is to illustrate the use of computer-guided surgery in orthodontics regarding miniscrews and piezocision. The search strategy was a combination of Medical Subject Headings (Mesh) and free text words for PubMed. A total of 27 articles were included in this review: 16 concerned miniscrews and 11 concerned corticotomy. The current need for faster treatments, the improved systems of anchorage, and the evolution of imaging technologies require operators to be knowledgeable of the digital workflow. CAD/CAM templates allow greater precision and predictability of miniscrew insertion even if in the hands of less experienced clinicians and permit a better orientation and depth of the cortical incision. In conclusion, digital planning makes surgery faster and easier and allows for the identification and correction of any potential problem before the procedure.

Full-Arch Guided Restoration and Bone Regeneration: A Complete Digital Workflow Case Report.

OBJECTIVE: complex rehabilitations present multiple difficulties, regarding both the planification of the surgery and the design of the prothesis. A digital approach can support the workflow, as well as the degree of intraoperative precision, and improve the long-term prognosis. METHODS: A surgical guide was designed for implant placement. An extensive regeneration of the upper jaw was performed with contextual implant insertion, and a delayed load rehabilitation was chosen. After four months, a second surgery and a simultaneous soft tissue augmentation was performed, and a 3D-printed temporary restoration was placed. After another two months, new dental and facial scans, smile design, and facial bite registrations were obtained. Upper and lower dentures were built using an exclusively digital workflow. Both metal substructures were passivated and cemented in one session; in the following appointment, the aesthetic and occlusal checks were carried out. During the third visit, both prostheses were delivered. RESULTS: Careful case planning and the surgical guide made it possible to achieve primary stability and acceptable emergence profiles in an extremely reabsorbed upper jaw. Leukocyte-Platelet Rich Fibrin (L-PRF) made the extensive bone regeneration more approachable and lowered the post-operative pain and swelling, while speeding up the soft tissue healing process. During the re-entry surgery, the volumes of soft tissues were increased to improve aesthetics, and the amount of keratinized gingiva around the six implants was also increased. Smile design and facial scans have provided the means to create acceptable aesthetics and function in a few sessions with minimal patient discomfort. CONCLUSIONS: Computer-assisted implantology is a safe and precise method of performing dental implant surgery. Preliminary studies have a high degree of accuracy, but further studies are needed to arrive at a fully digital clinical protocol at all stages.

Drilling accuracy evaluation of a mouldable surgical targeting system for minimally invasive access to anatomic targets in the temporal bone.

PURPOSE: Minimally invasive cochlear implant surgery using a micro-stereotactic surgical targeting system with on-site moulding of the template aims for a reliable, less experience-dependent access to the inner ear under maximal reduction of trauma to anatomic structures. We present an accuracy evaluation of our system in ex-vivo testing. METHODS: Eleven drilling experiments were performed on four cadaveric temporal bone specimens. The process involved preoperative imaging after affixing the reference frame to the skull, planning of a safe trajectory preserving relevant anatomical structures, customization of the surgical template, execution of the guided drilling and postoperative imaging for determination of the drilling accuracy. Deviation between the drilled and desired trajectories was measured at different depths. RESULTS: All drilling experiments were successfully performed. Other than purposely sacrificing the chorda tympani in one experiment, no other relevant anatomy, such as facial nerve, chorda tympani, ossicles or external auditory canal were harmed. Deviation between the desired and achieved path was found to be 0.25 ± 0.16 mm at skulls' surface and 0.51 ± 0.35 mm at the target level. The closest distance of the drilled trajectories' outer circumference to the facial nerve was 0.44 mm. CONCLUSIONS: We demonstrated the usability for drilling to the middle ear on human cadaveric specimen in a pre-clinical setting. Accuracy proved to be suitable for many applications such as procedures within the field of image-guided neurosurgery. Promising approaches to reach sufficient submillimetre accuracy for CI surgery have been outlined.

Surgeon-designed patient-specific instrumentation improves glenoid component screw placement for reverse total shoulder arthroplasty in a population with small glenoid dimensions.

PURPOSE: Glenoid component loosening is a potential complication of reverse total shoulder arthroplasty (rTSA), occurring in part due to lack of adequate screw purchase in quality scapular bone stock. This study was to determine the efficacy of a surgeon-designed, 3D-printed patient-specific instrumentation (PSI) compared to conventional instrumentation (CI) in achieving longer superior and inferior screw lengths for glenoid component fixation. METHODS: A multi-centre retrospective analysis of patients who underwent rTSA between 2015 and 2020. Lengths of the superior and inferior locking screws inserted for fixation of the glenoid baseplate component were recorded and compared according to whether patients received PSI or CI. Secondary outcomes included operative duration and incidence of complications requiring revision surgery. RESULTS: Seventy-three patients (31 PSI vs. 42 CI) were analysed. Average glenoid diameter was 24.5 mm (SD: 3.1) and 81% of patients had smaller glenoid dimensions compared to the baseplate itself. PSI produced significantly longer superior (44.7 vs. 30.7 mm; P < 0.001) and inferior (43.0 vs. 31 mm; P < 0.001) mean screw lengths, as compared to CI. A greater proportion of maximal screw lengths for the given rTSA construct (48 mm) were observed in the PSI group (71.9% vs. 11.9% superior, 59.4% vs. 11.9% inferior). Operative duration was not statistically significantly different between the PSI and CI groups (150 min vs. 169 min, respectively; P = 0.229). No patients had radiographic loosening of the glenoid component with an average of 2-year follow-up. CONCLUSION: PSI facilitates longer superior and inferior screw placement in the fixation of the glenoid component for rTSA. With sufficient training, PSI can be designed and implemented by surgeons themselves.

Patient-Specific Drill Guide Template for Pedicle Screw Insertion into the Atlantoaxial Cervical Spine Using Stereolithographic Modeling: An In Vitro Study.

STUDY DESIGN: Cadaveric study. PURPOSE: This study aimed to assess the accuracy and feasibility of cervical pedicle screw (CPS) insertion into the atlantoaxial cervical spine using a patient-specific drill guide template constructed from a stereolithographic model. OVERVIEW OF LITERATURE: CPS fixation is a widely accepted procedure for posterior cervical fixation because of its biomechanical advantages, particularly in the subaxial cervical region. The extremely narrow corridors of the atlantoaxial spine make CPS insertion more difficult, requiring the development of new tools to ensure accurate placement. METHODS: Fifteen atlantoaxial cervical vertebra specimens from 15 cadavers were scanned into thin slices using computed tomography. Images of the cadaver spine were digitally processed and rendered stl files so that they could be printed to scale as threedimensional (3D) plastic models. Manually molded dental acrylic drill guide templates with pins inserted in the pedicles of the plastic cervical models were placed over the 3D printed models. The drill guide templates were used for precise placement of the drill holes in the pedicles of cadaveric specimens for pedicle screw fixation. The accuracy of screw placement was evaluated by an independent evaluator. RESULTS: A total of 60 pedicles (combined C1 and C2) from 15 cadaveric axial cervical vertebrae were evaluated. The total acceptable accuracy for pedicle screw insertion in the atlantoaxial cervical vertebrae is 95%. An accuracy rate of 100% was achieved for C1 while an acceptable accuracy rate of 90% was achieved for C2. CONCLUSIONS: The use of a patient-specific drill guide constructed using stereolithography improved the accuracy of CPS placement in a cadaveric model.

The accuracy of virtual surgical planning in segmental Le Fort I surgery: A comparison of planned and actual outcome.

Segmental Le Fort I surgery is an effective technique to correct complicated dentomaxillofacial deformities. This retrospective study evaluated the accuracy of segmental Le Fort I surgery under the guidance of virtual surgical planning (VSP). A total of 129 patients who accepted segmental Le Fort I surgery were investigated in this study. VSP was transferred to segmental surgery with different pieces precisely with the aid of 3D-printed surgical templates and splints. The surgical result was evaluated by postoperative complications, color distance maps, and quantitative accuracy analysis. Outcomes showed that the VSP was successfully transferred to actual surgery with high accuracy. The overall mean linear difference was 1.28 mm, and the overall mean angular difference was 2.4°. Except for one case of root injury, there was no serious complication recorded. The results suggested that VSP was a reliable assistance for segmental Le Fort I surgery.

PRESS and Piezo Microsurgery (Bony Lid): A 7-Year Evolution in a Residency Program Part 1: Surgeon-defined Site Location.

INTRODUCTION: Treatment of a failing endodontic procedure via microsurgical revision presents better outcomes due, in part, to the integration of the surgical operating microscope (SOM) and cone-beam computed tomography (CBCT) into clinical practice. But challenges still remain with respect to the operational locations and the techniques required to address them. Posterior sites, with substantial cortical plate thicknesses and sensitive anatomy, present the dichotomy of visualization versus postsurgical regeneration of bone. The bony lid technique bridges the gap between these 2 concepts, and the application of piezosurgery renders a precise and biocompatible osseous incision. The purpose of this paper was to outline, through case reports, the progression of piezo-guided surgery in a postgraduate resident setting. METHODS: The primary evolution of the bony lid technique relied on the transfer of measurements from defined landmarks in the CBCT volume to the cortical plate of the surgical site. The secondary evolution used the same measurement protocols transferred to a laboratory model of the patients' arch. A vacuformed stent was fabricated with pertinent fiducial markers in gutta percha defining the surgical site parameters, and a scan exposed with the stent in place. These 2 evolutions are designated as the surgeon-defined site location method and are explained in greater detail in this the first of 2 parts of the topic. All surgeries were executed using the piezosurgical method with increasing levels of guidance and precision throughout the evolution process. RESULTS: Each step in the technique implementation enabled the resident to assimilate a new technique and skill set while maintaining bone architecture and minimizing volume loss postoperatively. The patient benefits were an increase in intraoperative safety and postoperative comfort. The resident benefits were accelerated regeneration timetables, and increase in the confidence level of the resident and number of scheduled posterior surgical procedures. CONCLUSIONS: The progression from crude on-site measurements to elegant and precise surgical guides enabled the access and manipulations of difficult surgical sites without compromising visibility, postoperative osseous regeneration, or patient comfort.

Use of a CAD-CAM Surgical Template to Improve Accuracy for Simultaneous Implant Removal, New Implant Placement, and Bone Graft.

A fractured implant is considered a catastrophic failure that leads to the loss of the implant and the prosthesis. Available methods of implant removal include the reverse screw technique, use of trephines, or osteotomies around the implant. In case of a fractured implant, the access hole for the reverse screw technique is impossible, leading to the need for an osteotomy. When the apical part of the fractured implant is embedded in bone, finding the piece may lead to a more ample osteotomy and significant bone loss, complicating future implant placement. This technique presented utilized a CAD-CAM surgical template that was designed with the purpose of improving accuracy in finding the fractured part with minimal osteotomy, allowing for simultaneous placement of a new implant in the same site, with additional bone graft, utilizing the same template.