On the solubility of azodicarbonamide in water/DMSO mixtures: an experimental and computational study.

This work aims at studying why azodicarbonamide (ADCA), a formally apolar compound with good hydrogen bond (HB) acceptors, is soluble only in polar aprotic solvents like dimethyl sulfoxide (DMSO) but not in water. Solubility measurements, as well as quantum mechanical and classical molecular dynamics simulations, were employed to tackle the problem. We found that in the liquid phase a polar conformer of ADCA (µ = 8.7 D), unreported to date, is favoured under the enthalpic drive provided by a highly polar solvent. At the same time, the very high hydrogen bond propensity of water with itself prevents this solvent from providing an effective hydrogen bond-mediated solvation. Solvents bearing good HB acceptors, while lacking strong HB donors, contribute to further stabilizing solute-solvent adducts through weak and fluxional HBs that involve the amide groups of ADCA. Implications for the solubility of ADCA down to µM concentrations were evaluated, also with the aid of classical simulations of solution nanodroplets.

Porphyrin Production by Corynebacterium diphtheriae Strains from Clinical Isolates.

Porphyrins are intermediate metabolites in the biosynthesis of vital molecules, including heme, cobalamin, and chlorophyll. Bacterial porphyrins are known to be proinflammatory and have been associated with biofilm production. This study investigated porphyrin production by strains of Corynebacterium diphtheriae using emission spectroscopy, high-performance liquid chromatography with fluorescence detection, a diode array detector, and mass spectrometry. Emission spectroscopy revealed characteristic porphyrin emission spectra in all strains, with coproporphyrin III predominating. Qualitative analysis via different chromatography methods revealed identified coproporphyrin III, uroporphyrin I, and protoporphyrin IX in all the strains. Quantitative analysis revealed strain-dependent coproporphyrin III production. More studies are needed to investigate the relationship between porphyrin production and the virulence potential of Corynebacterium diphtheriae.

Nondispersive Ultraviolet Visible Gas Analyzer for Monitoring Molybdenum Chloride and Oxychloride Precursors During Vapor Deposition Processes.

Nondispersive ultraviolet visible gas analyzer designs were evaluated for monitoring molybdenum-containing chloride and oxychloride precursor delivery during microelectronics vapor deposition processes. The performances of three analyzer designs, which differed only in the bandpass filter employed for wavelength selection, were compared for measuring the partial pressure of molybdenum pentachloride, molybdenum oxytetrachloride (MoOCl4), and molybdenum dioxydichloride (MoO2Cl2). The analyzer's optical response with a 369 nm center wavelength filter for molybdenum pentachloride was determined by measuring the molybdenum pentachloride absorbance as a function of vapor molar density. The calibrated analyzer was transferred to a process line on a deposition chamber and used to measure the molybdenum pentachloride partial pressure during delivery in a flowing carrier gas. The molybdenum pentachloride minimum detectable density was determined to be 1 × 10-4 mol m-3 (0.35 Pa for a cell temperature of 145 °C), for data collected at 1 kHz and referenced to a 0.2 s duration background. The analyzer optical response for molybdenum pentachloride with the two other filters and the response for MoOCl4 and MoO2Cl2 with all three filters were simulated with a simple model. These data were used to evaluate the sensitivity and selectivity of analyzers incorporating the different filters to some likely combinations of analytes and interferents.

Comprehensive Review of Synthesis, Optical Properties and Applications of Heteroarylphosphonates and Their Derivatives.

This review focuses on optical properties of compounds in which at least one phosphonate group is directly attached to a heteroaromatic ring. Additionally, the synthesis and other applications of these compounds are addressed in this work. The influence of the phosphonate substituent on the properties of the described compounds is discussed and compared with other non-phosphorus substituents, with particular attention given to photophysical properties, such as UV-Vis absorption and emission, fluorescence quantum yield and fluorescence lifetime. Considering the presence of heteroatom, the collected material was divided into two parts, and a review of the literature of the last thirty years on heteroaryl phosphonates containing sulfur and nitrogen atoms in the aromatic ring was conducted.

The Invisible Fraction within Melanin Capable of Absorbing UV Light and with Fluorescent Properties: Is It Lacking Consideration?

Expanding on earlier observations, we show that many melanin materials, in vitro synthesized from a wide range of precursors, can be fractionated into a dark-colored precipitate and a near-colorless, dispersible fraction. The dispersible fractions exhibited absorbance in the UVA and UVB range of the electromagnetic spectrum, but none in the visible range. In addition, fluorescent properties were associated with all dispersible fractions obtained. FT-IR spectroscopic analyses were performed to compare both types of fractions. Overall, it appears that some of the properties associated with melanin (UV absorbance, fluorescence) may not necessarily reside in the dark-colored portion of melanin, but in a colorless fraction of the material. It remains to be seen whether any of these in vitro observations have any relevance in vivo. However, we raise the possibility that the presence of a colorless fraction within melanin materials and their associated properties may have received inadequate attention. Given the important association between melanin, UV protection, and skin cancer, it is worthwhile to consider this additional aspect of melanin chemistry.

The quantitative and qualitative analysis of dye in fentanyl tablets via ultraviolet-visible spectroscopy-A forensic approach.

In the United States, illicit fentanyl is often trafficked as blue tablets mimicking the legitimate M-30 oxycodone tablet produced by Mallinckrodt. The analysis of dyes extracted from seized fentanyl tablets could provide a useful tool for law enforcement to establish linkages between cases and could prove useful for attributing a seizure to a given trafficking organization. Fentanyl tablet seizures associated with a particular drug trafficking organization (DTO), either through investigative or intelligence information, were used as the sample set for this study. The blue dye from the tablets was isolated by solid phase extraction and then qualitatively and quantitatively analyzed via ultraviolet-visible spectroscopy. This research revealed that the illicit tableting facilities use a different dye than several known pharmaceutical companies. The concentration of dye in individual tablets within a seizure proved to be very minimal, and the small sample size made it difficult to draw linkages from case to case. Analysis of the dyes could not effectively differentiate between the drug trafficking organizations in the tested population due to each DTO using the same dye; however, it is important to note that the dye found was consistent between illicit tablets.

Spectral and HPLC Analyses of Synthesized Butin and Butein.

Butin and butein are significant bioactive flavanones derived from plants, existing as tautomers of each other. However, their physicochemical attributes, such as their spectral profiles under varying experimental conditions in aqueous solutions and established chromatographic methods for distinguishing between them, remain undetermined. In this study, we determined the basic properties of butin and butein using conventional spectroscopic, reversed-phase, and chiral HPLC analyses. The spectra of the synthesized butin and butein were analyzed using a UV-Vis spectrophotometer in several solvents with different polarities as well as in aqueous solutions at various pH values. Furthermore, the behavior of the measured spectra was reproduced by calculations to reveal the effects of the solvent and pH on the spectra of butin and butein in organic and aqueous solutions. Subsequently, we assessed the structural stability of butin and butein using reversed-phase HPLC, which revealed that butein is unstable compared with butin in a general culture medium. The synthesized butin was effectively separated into R- and S-isomers with positive and negative Cotton effects, respectively, via HPLC using a chiral column. These findings will aid in uncovering the individual properties of both butin and butein that may have been concealed by their tautomerism and enable the synthesis of S-butin, which is typically challenging and time-consuming to isolate.

Spectrophotometric and chromatographic analysis of creatine:creatinine crystals in urine.

Creatinine is the end product of the catabolism of creatine and creatine phosphate. Creatine phosphate serves as a reservoir of high-energy phosphate, especially in skeletal and cardiac muscle. Besides typical known changes in serum and urinary creatinine concentrations, rare cases associated with changes in serum and urinary creatine levels have been described in the literature in humans. These cases are mostly linked to an excessive intake of creatine ethyl ester or creatine monohydrate, often resulting in increased urine creatinine concentrations. In addition, it is known that at such elevated creatinine concentrations, creatinine crystallisation may occur in the urine. Analysis of crystals and urinary concrements, often of heterogenous chemical composition, may provide diagnostic and therapeutic hints to the benefit of the patient. The aim of the present work was to analyze urine crystals of unclear composition with microscopic and spectroscopic techniques. On routine microscopic analysis of urine, a preliminary suspicion of uric acid or creatinine crystals was expressed. The crystals were of a cuboid shape and showed polarization effects in microscopy. The dried urine sample was whitish-orange in colour, odourless and dissolved well in water. Protein concentration in dry weight (DW) urine was about 0.3 mg/mg. The measured zinc content in the studied sample was approximately 660 µg/g DW sample and copper content was approximately 64 µg/g DW sample. A lead signal of around 10 µg/g DW sample was also observed. UV-Vis analysis showed a maximum creatine peak around 220 nm, compatible with the spectrum of creatinine with a maximum peak of 230 nm. Using HPLC technique, an extreme high ratio of creatine to creatinine of about 38 was measured, which led to the conclusion of the occurrence of rare creatine crystals in urine.

Gas-Phase Characterization of Redox-Active Manganese Complexes.

Manganese complexes exhibit a rich redox chemistry, usually accompanied by structural reorganization during the redox processes often followed by ligand dissociation or association. The push-pull ligand 2,6-diguanidylpyridine (dgpy) stabilizes manganese in the oxidation states +II, +III, and + IV in the complexes [Mn(dgpy)2]n+ (n = 2-4) without change in the coordination sphere in the condensed phase [Heinze et al., Inorganic Chemistry, 2022, 61, 14616]. In the condensed phase, the manganese(IV) complex is a very strong oxidant. In the present work, we investigate the stability and redox activity of the MnIV complex and its counterion (PF6-) adducts in the gas phase, using two modified 3D Paul ion trap mass spectrometers. Six different cationic species of the type [Mnx(dgpy)2(PF6)y]n+ (x = II, III, IV, y = 0-3, n = 1-3) could be observed for the three oxidation states MnIV, MnIII, and MnII, of which one observed complex also contains a reduced dgpy ligand. MnII species showed the highest relative stability in collision induced dissociation and UV/vis photo dissociation experiments. The lowest stability is observed in the presence of one or more counterions, which correlates to a lower total charge n+. Gas phase UV/vis spectra show similar features as the condensed phase spectra only differing in relative band intensities. The strongly oxidizing MnIV complex reacts with triethylamine (NEt3) in the gas phase to give MnIII, while MnIII species show little reactivity toward NEt3.

A fiber-optic spectroscopic setup for isomerization quantum yield determination.

A spectroscopic setup for isomerization quantum yield determination is reported. The setup combines fiber-coupled LEDs, a commercially calibrated thermopile detector for measurement of the photon flux, and a fiber-coupled UV-vis spectrometer. By solving the rate equations numerically, isomerization quantum yields can be obtained from the UV-vis absorption spectra. We show that our results for the prototypical photoswitch azobenzene are in excellent agreement with the literature. The analysis of the errors showed that the quantum yields determined using this method are in the same order of magnitude as when using actinometry, thus demonstrating the reliability of our setup.

Complexes of Zinc-Coordinated Heteroaromatic N-Oxides with Pyrene: Lewis Acid Effects on the Multicenter Donor-Acceptor Bonding.

4-Nitroquinoline-N-oxide (NQO) and 4-nitropyridine-N-oxide (NPO) are important precursors for the synthesis of substituted heterocycles while NQO is a popular model mutagen and carcinogen broadly used in cancer research; intermolecular interactions are critical for their reactions or functioning in vivo. Herein, the effects of the coordination of N-oxide's oxygen atom to Lewis acids on multicenter donor-acceptor bonding were explored via a combination of experimental and computational studies of the complexes of NQO and NPO with a typical π-electron donor, pyrene. Coordination with ZnCl2 increased the positive electrostatic potentials on the surfaces of these π-acceptors and lowered the energy of their LUMO. Analogous effects were observed upon the protonation of the N-oxides' oxygen or bonding with boron trifluoride. The interaction of ZnCl2, NPO, or NQO and pyrene resulted in the formation of dark co-crystals comprising π-stacked Zn-coordinated N-oxides and pyrene similar to that found with protonated or (reported earlier) BF3-bonded N-oxides. Computational studies indicated that the coordination of N-oxides to zinc(II), BF3, or protonation led to the strengthening of the multicenter bonding of the nitro-heterocycle with pyrene, and this effect was related both to the increased electrostatic attraction and molecular-orbital interactions in their complexes.

Comparative Linkage of Novel Anti-Tumor Pd(II) Complex with Bio-Macromulecules: Fluorescence, UV-Vis, DFT, Molecular Docking and Molecular Dynamics Simulation Studies.

A novel mononuclear palladium complex, [Pd(dach)(SSA)], where dach and SSA are diaminocyclohexane and sulfosalicylic acid ligands, respectively, has been synthesized and identified utilizing analytical and spectral methods. DFT calculations, namely geometry optimization, MEP, HOMO-LUMO and NBO analysis, have been conducted at B3LYP level by aug-ccpVTZ-PP and 6-311G(d, p) basis sets. NBO and HOMO-LUMO analysis exhibited that the palladium compound is stable. MEP showed the potential sites of molecule for the interaction. By employing MTT assay, the cytotoxicity activity of the aforesaid compound was examined on K562 cell line, which revealed a proper activity compared to cisplatin. To ascertain the lipophilicity of the newly made compound, the partition coefficient measurement was accomplished, which follows the order of cisplatin < Pd(II) complex. Next, investigation of binding properties of the studied compound with DNA of calf thymus and BSA were done by spectroscopic (CD, fluorescence emission and electronic adsorption) and non-spectroscopic (viscosity measurements, DNA gel electrophoresis, molecular docking and molecular dynamics simulation) methods. The outcomes of CD and UV-Vis spectroscopy demonstrated that the title compound refolded the protein via increasing the alpha helix percentage. The data obtained from UV-Vis studies indicated the non-intercalative mutual action between Pd(II) complex with DNA. It also revealed that the Kapp magnitude of CT-DNA (7.43 × 104 M- 1) is higher than the BSA (5.17 × 103 M- 1), and L1/2 (midpoint of transition) of CT-DNA (5 µM) is lower than the BSA (5.7 µM), indicating that the complex has a greater binding affinity to CT-DNA than BSA. Fluorescence quenching mechanism of the two biomolecules by the metal complex is static and the calculated thermodynamic parameters (ΔS° < 0 and ΔH° < 0) suggested the hydrogen bonding and/ or van der Waals forces with DNA and BSA. Further, molecular docking indicated that the studied compound fits into the groove of DNA and the site I of BSA. The stability of metal compound-DNA/-BSA in the presence of H2O solvent and over the time were validated via molecular dynamics simulation.

The Effect of Conjugated Nitrile Structures as Acceptor Moieties on the Photovoltaic Properties of Dye-Sensitized Solar Cells: DFT and TD-DFT Investigation.

A major challenge in improving the overall efficiency of dye-sensitized solar cells is improving the optoelectronic properties of small molecule acceptors. This work primarily investigated the effects of conjugation in nitriles incorporated as acceptor moieties into a newly designed series of D-A-A dyes. Density functional theory was employed to specifically study how single-double and single-triple conjugation in nitriles alters the optical and electronic properties of these dyes. The Cy-4c dye with a highly conjugated nitrile unit attained the smallest band gap (1.80 eV), even smaller than that of the strong cyanacrylic anchor group (2.07 eV). The dyes lacking conjugation in nitrile groups did not contribute to the LUMO, while LUMOs extended from donors to conjugated nitrile components, facilitating intramolecular charge transfer and causing a strong bind to the film surface. Density of state analysis revealed a considerable impact of conjugated nitrile on the electronic properties of dyes through an effective contribution in the LUMO, exceeding the role of the well-known strong 2,1,3-benzothiadiazole acceptor unit. The excited state properties and the absorption spectra were investigated using time-dependent density functional theory (TD-DFT). Conjugation in the nitrile unit caused the absorption band to broaden, strengthen, and shift toward the near-infrared region. The proposed dyes also showed optimum photovoltaic properties; all dyes possess high light-harvesting efficiency (LHE) values, specifically 96% for the dyes Cy-3b and Cy-4c, which had the most conjugated nitrile moieties. The dyes with higher degrees of conjugation had longer excitation lifetime values, which promote charge transfer by causing steady charge recombination at the interface. These findings may provide new insights into the structure of conjugated nitriles and their function as acceptor moieties in DSSCS, which may lead to the development of extremely effective photosensitizers for solar cells.

Investigation of the molecular structure of CHBP, biological activities and SARS-CoV-2 protein binding interaction by molecular and biomolecular spectroscopy approaches.

The objective of this investigation is to learn more about the structural, electrical, spectroscopic, and physiochemical characteristics of biologically active cyano-4'-hydroxybiphenyl (CHBP). The title molecule's optimized conformational analysis was computed using the DFT/B3LYP/6-311++G (d, p) level of theory. The observed wavenumbers were compared with theoretical FT-IR and FT-Raman spectra. 1H and 13C NMR experimental spectra in CDCl3 solution (solvent phase) were recorded and the chemical shift was calculated. NBO analysis was used to examine the transfer of charge as well as the intermolecular and intramolecular bonding of orbitals. The TD-DFT (time-dependent DFT) approach was used to estimate theoretical values for both the gas and solvent (ethanol) in the corresponding transitional research, which was conducted using UV-Vis's spectra. Energy gap (Eg = 0.26764 eV) implies that the strong potential for charge transfer, and the stability of the CHBP compound. CHBP compound's has bioactive nature, its drug-likeness and biological properties were evaluated. The predicted topological polar surface area of 44.02 \AA2 for the molecule falls within the permissible range of < 140 \AA2. Based on the docking results, the most stable docking score value is -6.84 kcal/mol. In that interaction, MET 165 affects both phenyl rings in a pi-sulphur fashion and a single bond hydrogen with protein moieties GLN 192. This suggests that the pi-alkyl in PRO 168 is a hydroxyl substitutional ring. Our findings demonstrate the CHBP compound is a good inhibitor against the SAR COVID-19 viral protein.

Comparative performance of liquid chromatography and spectrophotometry in determining metformin hydrochloride within pharmaceutical formulations.

The present study compared the performance of Ultra-high performance liquid chromatography (UHPLC) and UV-Vis spectrophotometry for the quantification of metformin hydrochloride in five commercially available metformin hydrochloride products with different strengths. The metformin hydrochloride was measured in the UHPLC with a mobile phase consisting of a mixture of 0.05 M phosphate buffer solution and methanol (35:65, v/v) with a pH of 3.6. Metformin hydrochloride was determined spectrophotometrically at 234 nm using a mixture of methanol and water as a blank. The methods' linearity for metformin hydrochloride was within the concentration range of (2.5-40 µg/ml) in both techniques. The validation process encompassed assessments of specificity, selectivity, linearity, accuracy, precision, the lower limit of quantification (LLOQ), the lower limit of detection (LLOD), robustness, and system suitability. For the UHPLC validation method, the repeatability and reproducibility (expressed as relative standard deviation) were less than 1.578 and 2.718 %, respectively. The LLOQ for metformin hydrochloride was 0.625 µg/ml, and the LLOD was 0.156 µg/ml. For the UV-Vis spectrophotometric validation method, the repeatability and reproducibility (stated as relative standard deviation) were less than 3.773 and 1.988 %, respectively. The percentage recovery results for the five brands of metformin hydrochloride tablets were (98-101 %) and (92-104 %) for the UHPLC and UV-Vis spectrophotometric methods, respectively. In conclusion, the described methodologies were successfully employed for the quantitative analysis of metformin hydrochloride in different pharmaceutical tablet products.

Data on terpene content in pre-rolled cone paper infused with terpene-containing flavours based on the formation of a partially soluble precipitate.

The high volatility of the terpenes contained in flavour-containing terpene (FCT) products causes the loss of these contents during product storage; thus, measuring the loss of FCT content during storage is important to estimate the final content. This work provides data on the reduction in FCT content of infused pre-rolled paper cones after 1 to 7 days of storage. Determination of FCT content was based on the formation of a reddish-brown precipitate resulting from the reaction of terpene moiety in FCT with sulphuric acid. Then, the absorbance of the precipitate was analysed using the UV-Vis Spectrophotometric method at a visible wavelength of 538 nm. A calibration standard curve was prepared concerning the concentration of the original FCT sample and used to determine the FCT content in infused pre-rolled paper. The FCT content on the first day of storage decreased and increased again after seven days of storage due to condensation. The data on the FCT content reduction as the effect of additive added was also evaluated.

Sonochemical synthesis, optical properties and DFT studies on novel (N-arylamino)phenothiazinium dyes suitable for fluorescence cells imaging.

Novel (N-arylamino)phenothiazinium dyes containing meta-substituted-arylamine auxochrome units were successfully obtained by applying a sonochemical protocol designed for a more efficient energy usage in the preparation of methylene blue (MB) analogues. Single crystal X-ray diffraction analysis revealed the spatial arrangement in aggregated crystalline state of (N-(meta-bromoaryl)amino)phenothiazinium dye with minor variances induced by the nature of the halogenide counterion (iodide or chloride). The optical UV-vis properties of the novel (N-arylamino)phenothiazinium dyes were comparable to those of the parent MB, with the longest wavelength absorption maxima situated in the visible range (640-680 nm), large molar extinction coefficients (log ε = 4.5-5.1) and weak solvatochromism in polar solvents. Their fluorescence emission in solid state was evidenced by One Photon Excited Fluorescence Lifetime Imaging (OPE-FLIM) and Two Photon Excited Fluorescence Lifetime Imaging (TPE-FLIM) experiments. Theoretical calculations based on Time Dependent-Density Functional Theory (TD-DFT) at B3PW91 and CAM-B3LYP/def2-SV(P) level of theory predicted absorption and fluorescence emission wavelength maxima in reasonable agreement with experimental data. Computational results suggest that the electronic excitations imply a departure from the planar molecular ground state towards geometrically rearranged excited states disfavoring the vibronic couplings due to a high degree of flexibility induced by the conformational motion of the N-arylamino auxochromes. Preliminary studies regarding the dyes' relevance in biological environment indicated lipophilicity (log P octanol/water 0.5-2.3), no aggregation tendency in diluted solutions in the concentration range 10-50 microM and ability for cytoplasmatic staining of D407 human retinal pigment epithelial cells.

In situ nitrogen-doped graphene-TiO2 nano-hybrid as an efficient photocatalyst for pollutant degradation.

To solve environmental-related issues (wastewater remediation, energy conservation and air purification) caused by rapid urbanization and industrialization, synthesis of novel and modified nanostructured photocatalyst has received increasing attention in recent years. We herein report the facile synthesis of in situ nitrogen-doped chemically anchored TiO2 with graphene through sol-gel method. The structural analysis using X-ray diffraction showed that the crystalline nitrogen-doped graphene-titanium dioxide (N-GT) nanocomposite is mainly composed of anatase with minor brookite phase. Raman spectroscopy revealed the graphene characteristic band presence at low intensity level in addition to the main bands of anatase TiO2. X-ray photoelectron spectroscopy analysis disclosed the chemical bonding of TiO2 with graphene via Ti-O-C linkage, also the substitution of nitrogen dopant in both TiO2 lattice and into the skeleton of graphene nanoflakes. UV-Vis absorption spectroscopy analysis established that the modified material can efficiently absorb the longer wavelength range photons due to its narrowed band gap. The N0.06-GT material showed the highest degradation efficiency over methylene blue (MB, ∼98%) under UV and sulfamethoxazole (SMX, ∼ 90.0%) under visible light irradiation. The increased activity of the composite is credited to the synergistic effect of high surface area via greater adsorption capacity, narrowed band gap via increased photon absorption, and reduced e-/h+ recombination via good electron acceptability of graphene nanoflakes and defect sites (Ti3+ and oxygen vacancy (Vo)). The ROS experiments further depict that primarily hydroxyl radicals (OH•) and superoxide anions (O2•-) are responsible for the pollutant degradation in the process redox reactions. In summary, our findings specify new insight into the fabrication of this new material whose efficiency can be further tested in applications like H2 production, CO2 conversion to value-added products, and in energy conservation and storage.

The Role of Hydrogen Bonding in the Raman Spectral Signals of Caffeine in Aqueous Solution.

The identification and quantification of caffeine is a common need in the food and pharmaceutical industries and lately also in the field of environmental science. For that purpose, Raman spectroscopy has been used as an analytical technique, but the interpretation of the spectra requires reliable and accurate computational protocols, especially as regards the Resonance Raman (RR) variant. Herein, caffeine solutions are sampled using Molecular Dynamics simulations. Upon quantification of the strength of the non-covalent intermolecular interactions such as hydrogen bonding between caffeine and water, UV-Vis, Raman, and RR spectra are computed. The results provide general insights into the hydrogen bonding role in mediating the Raman spectral signals of caffeine in aqueous solution. Also, by analyzing the dependence of RR enhancement on the absorption spectrum of caffeine, it is proposed that the sensitivity of the RR technique could be exploited at excitation wavelengths moderately far from 266 nm, yet achieving very low detection limits in the quantification caffeine content.

Synthesis, characterisation, and in vitro antiparasitic activity of new flavanoidal tetrazinan-6'-ones and their binding study with calf thymus DNA using molecular modelling and spectroscopic techniques.

With the developing resistance to traditional antiparasitic medications, the purpose of this study was to efficiently develop a series of six noble flavanoidal tetrazinane-6'-one derivatives by a one-pot reaction pathway. FT-IR, 1HNMR, 13CNMR, and Mass spectra were employed for the structural elucidation of the synthesized compounds (7-12). Clinostomum complanatum, a parasite infection model that has been well-established, demonstrated that all the synthesized compounds are potent antiparasitic agents. DNA is the main target for various medicinal compounds. As a result, thestudy of how small molecules attach to DNA has received a lot of attention. In the present study, we have performed various biophysical techniques to determine the mode of binding of synthesized compounds (7-12) with calf thymus DNA (ct-DNA). It was observed from the UV-visible absorbance and fluorescence spectra that all synthesized compounds (7-12) form complexes with the ct-DNA. The value of binding constant (Kb) was obtained to be in the range of 4.36---24.50 × 103 M - 1 at 298 K. Competitive displacement assay with ethidium bromide (EB), CD spectral analysis, viscosity measurements, and in silico molecular docking confirmed that ligands (7-12) incorporate with ct-DNA through groove binding only. Molecular docking studies were performed for all synthesized compounds with the calf thymus DNA and it was found that all the newly synthesized compounds strongly bind with the chain B of DNA in the minor groove with the value of binding energy in the range of -8.54 to -9.04 kcal per mole and several hydrogen bonding interactions.