RESUMO
Spent adsorbents for recycling as catalysts have drawn considerable attention due to their environmentally benign chemistry properties. However, traditional thermocatalytic strategies limit their applications. Here, we developed an enhanced photocatalytic strategy to expand the range of their applications. A magnetic chitosan/ZrO2 composites (MZT) for V(V) adsorption, which were prepared using chitosan, ZrO2 and Fe3O4 by one-pot synthesis. The spent MZT as a catalyst was used to synthesize 2-phenylbenzimidazole, yielding up to 89.7%. It also was implemented to photocatalysis reactions for recycle. The discolored rates of rhodamine B (RhB) were 72.3% and 97.4% by new and spent MZT, respectively. The new and spent MZT showed the forbidden bands were 251 nm and 561 nm, respectively. The result displayed spent MZT red shifted to the cyan light region. The mechanism of catalysis also has been studied in detail.
RESUMO
Vanadium (V) occurs in environment naturally and anthropogenically, but little has been understood about its environmental behavior in groundwater aquifer with sediments. This study investigated the pentavalent V [V(V)] transport and transformation under the influence of different sediment components (minerals, organic matter, and microorganisms) through column experiments. All these components played pivotal roles in V immobilization. The synergistic effects of sediment components enhanced V retention compared to individual component. Mineral components, particularly those containing carbonates and metal oxides, predominantly influenced V(V) transport as indicated by XRD analysis. Organic matter, especially under low pH conditions, induced particle aggregation, thereby inhibiting the transport of V(V). The V K-edge X-ray absorption near-edge structure spectroscopy revealed the formation of tetravalent V[V(IV)] in treatments involving organic matter and microorganisms. Notably, organic matter exhibited the capability to directly reduce V(V). The introduction of microorganisms restricted V(V) transfer. V(V) reducing genera (e.g., Brevundimonas, Arenimonas, Xanthobacter) were detected, achieving V(V) reduction to insoluble V(IV). V(V) bioreduction was improved by minerals that promote microbial metabolism with enhanced electron transfer, or by organic matter that increases levels of intracellular nicotinamide adenine dinucleotide and extracellular polymeric substances. This study specifies the contributions of different sediment components to the transportation and transformation of V, deepening our understanding of V biogeochemistry in groundwater aquifer.
RESUMO
Supercapacitors (SCs) are widely recognized as competitive power sources for energy storage. The hierarchical structure of nickel vanadium sulfide nanoparticles encapsulated on graphene nanosheets (NVS/G) was fabricated using a cost-effective and scalable solvothermal process. The reaction contents of the composites were explored and optimized. TEM images displayed the nickel vanadium sulfide nanoparticles (NVS NPs) with 20-30 nm average size anchored to graphene nanosheets. The interconnection of graphene nanosheets encapsulating NVS nanoparticles effectively reduces the ion diffusion path between the electrode and electrolyte, thereby enhancing electrochemical performance. The NVS/G composite demonstrated improved electrochemical performance, achieving a maximum of 1437 F g-1 specific capacitance at 1 A g-1, remarkable rate capability retaining of 1050 F g-1 at 20 A g-1, and exceptional cycle stability with 91.2% capacitance retention following 10,000 cycles. The NVS/G composite was employed as a cathode, and reduced graphene oxide (rGO) was used as an anode material to assemble a device. Importantly, asymmetric SCs using NVS/G//rGO achieved 74.7 W h kg-1 energy density at 0.8 kW kg-1 power density, along with outstanding stability with 88.2% capacitance retention following 10,000 cycles. These superior properties of the NVS/G electrode highlight its significant potential in energy storage applications.
RESUMO
Modulating the electronic structure of catalysts to effectively couple the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is essential for developing high-efficiency anion exchange membrane water electrolyzer (AEMWE). Herein, a coral-like nanoarray composed of nanosheets through the synergistic layering effect of cobalt and the 1D guiding of vanadium is synthesized, which promotes extensive contact between the active sites and electrolyte. The HER and OER activities can be enhanced by modulating the electronic structure through nitridation and phosphorization, respectively, enhancing the strength of metal-H bond to optimize hydrogen adsorption and facilitating the proton transfer to improve the transformation of oxygen-containing intermediates. Resultantly, the AEMWE achieves a current density of 500 mA cm-2 at 1.76 V for 1000 h in 1.0 M KOH at 70 °C. The energy consumption is 4.21 kWh Nm-3 with the producing hydrogen cost of $0.93 per kg H2. Operando synchrotron radiation and Bode phase angle analyses reveal that during the high-energy consumed OER, the dissolution of vanadium species transforms distorted Co-O octahedral into regular octahedral structures, accompanied by a shortening of the Co-Co bond length. This structural evolution facilitates the formation of oxygen intermediates, thus accelerating the reaction kinetics.
RESUMO
Aqueous Mn-ion batteries (MIBs) exhibit a promising development potential due to their cost-effectiveness, high safety, and potential for high energy density. However, the development of MIBs is hindered by the lack of electrode materials capable of storing Mn2+ ions due to acidic manganese salt electrolytes and large ion radius. Herein, the tunnel-type structure of monoclinic VO2 nanorods to effectively store Mn2+ ions via a reversible (de)insertion chemistry for the first time is reported. Utilizing exhaustive in situ/ex situ multi-scale characterization techniques and theoretical calculations, the co-insertion process of Mn2+/proton is revealed, elucidating the capacity decay mechanism wherein high proton activity leads to irreversible dissolution loss of vanadium species. Further, the Grotthuss transfer mechanism of protons is broken via a hydrogen bond reconstruction strategy while achieving the modulation of the electric double-layer structure, which effectively suppresses the electrode interface proton activity. Consequently, the VO2 demonstrates excellent electrochemical performance at both ambient temperatures and -20 °C, especially maintaining a high capacity of 162 mAh g-1 at 5 A g-1 after a record-breaking 20 000 cycles. Notably, the all-vanadium symmetric pouch cells are successfully assembled for the first time based on the "rocking-chair" Mn2+/proton hybrid mechanism, demonstrating the practical application potential.
RESUMO
For the first time the sensitive determination of carbendatim (CRB) is reported utilizing a well-designed sensing architecture based on vanadium diselenide-multiwalled carbon nanotube (VSMC). FTIR, XRD, FESEM, EDS, and EIS were employed to evaluate the sensor's structural integrity, and the results demonstrated the successful integration of nanomaterials, resulting in a robust and sensitive electrochemical sensor. Cyclic voltammetry (CV) and chronoamperometric (CA) investigations showed that the sensor best performed at pH 8.0 (BRB) with an excellent detection limit of 9.80 nM with a wide linear range of 0.1 to 10.0 µM. A more thermodynamically viable oxidation of CRB was observed at the VSMC/GCE, with a shift of 200 mV in peak potential towards the less positive side compared with the unmodified GCE. In addition, the sensor demonstrated facile heterogeneous electron transfer, favorable anti-fouling traits in the presence of a wide range of interferents, good stability, and reproducible analytical performance. Finally, the developed sensor was validated for real-time quantification of CRB from spiked water, food, and bio-samples, which depicted acceptable recoveries (98.6 to 101.5%) with RSD values between 0.35 and 2.23%. Further, to derive the possible sensing mechanism, the valence orbitals projected density of states (PDOS) for C, H, and N atoms of an isolated CRB molecule, VSe2 + CNT and VSe2 + CNT + CRB were calculated using density functional theory (DFT) calculations. The dominant charge transfer from the valence 2p-orbitals of the C and N atoms of CRB to CNT is responsible for the electrochemical sensing of CRB molecules.
Assuntos
Benzimidazóis , Carbamatos , Técnicas Eletroquímicas , Limite de Detecção , Nanotubos de Carbono , Nanotubos de Carbono/química , Técnicas Eletroquímicas/métodos , Técnicas Eletroquímicas/instrumentação , Carbamatos/análise , Carbamatos/química , Benzimidazóis/química , Benzimidazóis/análise , Contaminação de Alimentos/análise , Eletrodos , Poluentes Químicos da Água/análise , AnimaisRESUMO
Beyond-Moore computing technologies are expected to provide a sustainable alternative to the von Neumann approach not only due to their down-scaling potential but also via exploiting device-level functional complexity at the lowest possible energy consumption. The dynamics of the Mott transition in correlated electron oxides, such as vanadium dioxide, has been identified as a rich and reliable source of such functional complexity. However, its full potential in high-speed and low-power operation has been largely unexplored. We fabricated nanoscale VO2 devices embedded in a broadband test circuit to study the speed and energy limitations of their resistive switching operation. Our picosecond time-resolution, real-time resistive switching experiments and numerical simulations demonstrate that tunable low-resistance states can be set by the application of 20 ps long, <1.7 V amplitude voltage pulses at 15 ps incubation times and switching energies starting from a few femtojoule. Moreover, we demonstrate that at nanometer-scale device sizes not only the electric field induced insulator-to-metal transition but also the thermal conduction limited metal-to-insulator transition can take place at time scales of 100s of picoseconds. These orders of magnitude breakthroughs can be utilized to design high-speed and low-power dynamical circuits for a plethora of neuromorphic computing applications from pattern recognition to numerical optimization.
RESUMO
Vanadium-based compounds have attracted significant attention as cathodes for aqueous zinc metal batteries (AZMBs) because of their remarkable advantages in specific capacities. However, their low diffusion coefficient for zinc ions and structural collapse problems lead to poor rate capability and cycle stability. In this work, bilayered Sr0.25V2O5·0.8H2O (SVOH) nanowires are first reported as a highly stable cathode material for rechargeable AZMBs. The synergistic pillaring effect of strontium ions and water molecules improves the structural stability and ion transport dynamics of vanadium-based compounds. Consequently, the SVOH cathode exhibits a high capacity of 325.6 mAh g-1 at 50 mA g-1, with a capacity retention rate of 72.6% relative to the maximum specific capacity at 3.0 A g-1 after 3000 cycles. Significantly, a unique single-nanowire device is utilized to demonstrate the excellent conductivity of the SVOH cathode directly. Additionally, the energy storage mechanism of zinc insertion and extraction is investigated using a variety of advanced in situ and ex situ analysis techniques. This method of ion intercalation to improve electrochemical performance will further promote the development of AZMBs in large-scale applications.
RESUMO
The aim of the present work is to use the latest achievements of nanotechnology (atomic layer deposition, ALD) in the field of food packaging to prevent biofilm formation by food-associated bacteria. Some potential applications of nanotechnology in the food packaging industry are studied in the manuscript, in the field of antibacterial materials for food packaging. The ALD technique was used to synthesize vanadium (V)-doped TiO2 thin nanofilm on commercially available polypropylene (PP) food container to enhance an antibacterial activity for potential use in food packaging, to reduce spoilage, thereby, prolonging the food shelf- life. To better understand the ability and effectiveness of the antimicrobial packaging material of V-doped TiO2, to prevent the biofilm formation by dairy-associated pathogenic bacteria, the coated and uncoated PP containers with a fresh raw cow's milk were tested. We have illustrated the effectiveness of ALD Al2O3 + TiVOx nanocoating against populations of milk-borne pathogenic bacteria.
RESUMO
BACKGROUND AND PURPOSE: Metal-based therapeutic agents are limited by the required concentration of metal-based agents. Hereby, we determined if combination with 17ß-oestradiol (E2) could reduce such levels and the therapy still be effective in type 2 diabetes mellitus (T2DM). EXPERIMENTAL APPROACH: The metal-based agent (vanadyl acetylacetonate [VAC])- 17ß-oestradiol (E2) combination is administered using the membrane-permeable graphene quantum dots (GQD), the vehicle, to form the active GQD-E2-VAC complexes, which was characterized by fluorescence spectra, infrared spectra and X-ray photoelectron spectroscopy. In db/db type 2 diabetic mice, the anti-diabetic effects of GQD-E2-VAC complexes were evaluated using blood glucose levels, oral glucose tolerance test (OGTT), serum insulin levels, homeostasis model assessment (homeostasis model assessment of insulin resistance [HOMA-IR] and homeostasis model assessment of ß-cell function [HOMA-ß]), histochemical assays and western blot. KEY RESULTS: In diabetic mice, GQD-E2-VAC complex had comprehensive anti-diabetic effects, including control of hyperglycaemia, improved insulin sensitivity, correction of hyperinsulinaemia and prevention of ß-cell loss. Co-regulation of thioredoxin interacting protein (TXNIP) activation by the combination of metal complex and 17ß-oestradiol contributed to the enhanced anti-diabetic effects. Furthermore, a potent mitochondrial protective antioxidant, coniferaldehyde, significantly potentiates the protective effects of GQD-E2-VAC complexes. CONCLUSION AND IMPLICATIONS: A metal complex-E2 combinatorial approach achieved simultaneously the protection of ß cells and insulin enhancement at an unprecedented low dose, similar to the daily intake of dietary metals in vitamin supplements. This study demonstrates the positive effects of combination and multi-modal therapies towards type 2 diabetes treatment.
RESUMO
This research explores the synthesis, characterization, and application of Vanadium Pentoxide nanoparticles (V2O5 NPs), focusing on their efficacy in the photocatalytic degradation of organic dyes under visible light. Utilizing a co-precipitation method, we synthesized V2O5 NPs characterized by an orthorhombic crystal structure with a consistent average particle size of 28 nm. The optical properties of V2O5 NPs, including their band gap, were thoroughly investigated to understand their light absorption capabilities, which are crucial for photocatalytic activity. In our study, Methyl Violet (MV) dye was employed as a model organic pollutant to assess the photocatalytic performance of the nanoparticles. Under visible light irradiation, the V2O5 nanoparticles demonstrated an exceptional photocatalytic degradation efficiency, achieving up to 85% degradation of the MV dye within 100 min. This high level of efficiency is attributed to the nanoparticles' ability to effectively absorb visible light and generate electron-hole pairs, thereby facilitating a robust degradation process. Further analysis revealed that the photocatalytic activity led to the generation of reactive oxygen species (ROS) such as superoxide and hydroxyl radicals, which are integral to the dye degradation mechanism. These ROS play a critical role in breaking down the dye molecules, significantly contributing to the overall effectiveness of the photocatalytic process. The results of this study highlight the potential of V2O5 nanoparticles as a sustainable and effective photocatalytic material for environmental remediation applications, particularly in the treatment of wastewater containing organic dyes. This research not only advances our understanding of the photocatalytic properties of V2O5 nanoparticles but also demonstrates their practical application in addressing environmental pollution through innovative and efficient degradation of hazardous substances.
RESUMO
This study delves into the effects of titanium (Ti) doping on the optical properties of vanadium dioxide (VO2), a material well known for its metal-to-insulator transition (MIT) near room temperature. By incorporating Ti into VO2's crystal lattice, we aim to uncover the resultant changes in its physical properties, crucial for enhancing its application in smart devices. Utilizing polarized infrared micro-spectroscopy, we examined TixV1-xO2 single crystals with varying Ti concentrations (x = 0.059, x = 0.082, and x = 0.187) across different crystal phases (the conductive rutile phase and insulating monoclinic phases M1 and M2) from the far-infrared to the visible spectral range. Our findings reveal that Ti doping significantly influences the phononic spectra, introducing absorption peaks not attributed to pure VO2 or TiO2. This is especially notable with polarization along the crystal growth axis, mainly in the x = 0.187 sample. Furthermore, we demonstrate that the electronic contribution to optical conductivity in the metallic phase exhibits strong anisotropy, higher along the c axis than the a-b plane. This anisotropy, coupled with the progressive broadening of the zone center infrared active phonon modes with increasing doping, highlights the complex interplay between structural and electronic dynamics in doped VO2. Our results underscore the potential of Ti doping in fine-tuning VO2's electronic and thermochromic properties, paving the way for its enhanced application in optoelectronic devices and technologies.
RESUMO
To meet the current demand for lead-free piezoelectric ceramics, a novel sol-gel synthesis route is presented for the preparation of Ba0.85Ca0.15Ti0.9Zr0.1O3 doped with cerium (Ce = 0, 0.01, and 0.02 mol%) and vanadium (V = 0, 0.3, and 0.4 mol%). X-ray diffraction patterns reveal the formation of a perovskite phase (space group P4mm) for all samples after calcination at 800 °C and sintering at 1250, 1350, and 1450 °C, where it is proposed that both dopants occupy the B site. Sintering studies show that V doping allows the sintering temperature to be reduced to at least 1250 °C. Undoped BCZT samples sintered at the same temperature show reduced functional properties compared to V-doped samples, i.e., d33 values increase by an order of magnitude with doping. The dissipation factor tan δ decreases with increasing sintering temperature for all doping concentrations, while the Curie temperature TC increases for all V-doped samples, reaching 120 °C for high-concentration co-doped samples. All results indicate that vanadium doping can facilitate the processing of BCZT at lower sintering temperatures without compromising performance while promoting thermal property stability.
RESUMO
Vanadium redox flow batteries (VRFBs) are of considerable importance in large-scale energy storage systems due to their high efficiency, long cycle life and easy scalability. In this work, chemical vapor deposition (CVD) grown carbon nanotubes (CNTs)-modified electrodes and Nafion 117 membrane are utilised for formulating a vanadium redox flow battery (VRFB). In a CVD chamber, the growth of CNTs is carried out on an acid-treated graphite felt surface. Cyclic voltammetry of CNT-modified electrode and acid-treated electrode revealed that CNTs presence improve the reaction kinetics of V3+/V2+ and VO2+/VO2+ redox pairs. Battery performance is recorded for analysing, the effect of modified electrodes, varying electrolyte flow rates, varying current densities and effect of removing the current collector plates. CNTs presence enhance the battery performance and offered 96.30% of Coulombic efficiency, 79.33% of voltage efficiency and 76.39% of energy efficiency. In comparison with pristine electrodes, a battery consisting CNTs grown electrodes shows a 14% and 15% increase in voltage efficiency and energy efficiency, respectively. Battery configured without current collector plates performs better as compared to with current collector plates which is possibly due to decrease in battery resistance.
RESUMO
Aqueous zinc-ion batteries (ZIBs) have attracted burgeoning attention and emerged as prospective alternatives for scalable energy storage applications due to their unique merits such as high volumetric capacity, low cost, environmentally friendly, and reliable safety. Nevertheless, current ZIBs still suffer from some thorny issues, including low intrinsic electron conductivity, poor reversibility, zinc anode dendrites, and side reactions. Herein, conductive polyaniline (PANI) is intercalated as a pillar into the hydrated V2O5 (PAVO) to stabilize the structure of the cathode material. Meanwhile, graphene oxide (GO) was modified onto the glass fiber (GF) membrane through simple electrospinning and laser reduction methods to inhibit dendrite growth. As a result, the prepared cells present excellent electrochemical performance with enhanced specific capacity (362 mAh g-1 at 0.1 A g-1), significant rate capability (280 mAh g-1 at 10 A g-1), and admirable cycling stability (74% capacity retention after 4800 cycles at 5 A g-1). These findings provide key insights into the development of high-performance zinc-ion batteries.
RESUMO
In order to simultaneously accelerate ion and electron transfer in sodium-ion battery (SIB) cathodes, a topotactic superlattice was utilized, in which the atomically intrinsic lattice-matching effect from inner to external surface can boost the charge transfer due to the disappearance of the heterojunction interface. Herein, a topotactic syntopogenous Na3VF6/NaVF3 superlattice formulated as Na2.9V1.1F6 (NVF) was synthesized by a facile one-step low-temperature hydrothermal reaction. NVF nanoparticles show an excellent Na+ storage capacity (â¼205 mAh g-1) in a high voltage window up to 4.2 V with ultralong cycling stability. That is associated with the mixed occupancy of V and Na in NVF. The multivalent V centers serve as electron reservoirs to inhibit phase transformation, and the Na-enriched Na3VF6 with better electron conductivity acts as a Na+ reservoir for effective electron transfer. Highly reversible (de)intercalation of Na+ is achieved in the channel of perovskite-type NaVF3 with structural integrity.
RESUMO
Increasing attention is being paid to the application potential of multi-functional reconfigurable metamaterials in intelligent communication, sensor networks, homeland security, and other fields. A polarization-independent multi-functional reconfigurable metasurface based on doped vanadium dioxide (VO2) is proposed in this paper. It can be controlled to switch its function among three working modes: electromagnetically induced absorption (EIA), electromagnetically induced transparency (EIT), and asymmetrical absorption. In addition, deep learning tools have greatly accelerated the design of relevant devices. Such devices and the method proposed in this paper have important value in the field of intelligent reconfigurable metamaterials, communication, and sensing.
RESUMO
The metal-insulator (MI) transition of vanadium dioxide (VO2) is effectively modulated by oxygen vacancies, which decrease the transition temperature and insulating resistance. Oxygen vacancies in thin films can be driven by oxygen transport using electrochemical potential. This study delves into the role of crystallographic channels in VO2 in facilitating oxygen transport and the subsequent tuning of electrical properties. A model system is designed with two types of VO2 thin films: (100)- and (001)-oriented, where channels align parallel and perpendicular to the surface, respectively. Growing an oxygen-deficient TiO2 layer on these VO2 films prompted oxygen transport from VO2 to TiO2. Notably, in (001)-VO2 film, where oxygen ions move along the open channels, the oxygen migration deepens the depleted region beyond that in (100)-VO2, leading to more pronounced changes in metal-insulator transition behaviors. The findings emphasize the importance of understanding the intrinsic crystal structure, such as channel pathways, in controlling ionic defects and customizing electrical properties for applications.
RESUMO
The disorderly discharge of industrial wastewater containing heavy metals has caused serious water pollution and ecological environmental risks, ultimately threatening human life and health. Biological treatment methods have obvious advantages, but the existing microorganisms exhibit issues such as poor resistance, adaptability, colonization ability, and low activity. However, a wide variety of microorganisms in deep-sea hydrothermal vent areas are tolerant to heavy metals, possessing the potential for efficient treatment of heavy metal wastewater. Based on this, the study obtained a group of deep-sea microbial communities dominated by Burkholderia-Caballeronia-Paraburkholderia through shake flask experiments from the sediments of deep-sea hydrothermal vents, which can simultaneously achieve the synchronous removal of vanadium and cadmium heavy metals through bioreduction, biosorption, and biomineralization. Through SEM-EDS, XRD, XPS, and FT-IR analyses, it was found that V(V) was reduced to V(IV) through a reduction process and subsequently precipitated. Glucose oxidation accelerated this process. Cd(II) underwent biomineralization to form precipitates such as cadmium hydroxide and cadmium carbonate. Functional groups on the microbial cell surface, such as -CH2, C=O, N-H, -COOH, phosphate groups, amino groups, and M-O moieties, participated in the bioadsorption processes of V(V) and Cd(II) heavy metals. Under optimal conditions, namely a temperature of 40 °C, pH value of 7.5, inoculation amount of 10%, salinity of 4%, COD concentration of 600 mg/L, V5+ concentration of 300 mg/L, and Cd2+ concentration of 40 mg/L, the OD600 can reach its highest at 72 h, with the removal efficiency of V5+, Cd2+, and COD in simulated vanadium smelting wastewater reaching 86.32%, 59.13%, and 61.63%, respectively. This study provides theoretical insights and practical evidence for understanding the dynamic changes in microbial community structure under heavy metal stress, as well as the resistance mechanisms of microbial treatment of industrial heavy metal wastewater.
RESUMO
Vanadium pentoxide (V2O5) nanoparticles exhibit diverse properties and have been studied for a wide range of applications, including energy storage, catalysis, environmental remediation, and material enhancement. In this work, we have reported the synthesis of vanadium pentaoxide (V2O5) nanoparticles using hydrothermal method. Ammonium metavanadate (NH4VO3) was used as a source of vanadium. These syntheses were carried out at four different concentrations of vanadium source. The hydrothermal reaction was conducted at a temperature of 180 °C for a duration of 24 hours, followed by an additional 24 hours period of natural cooling. Four samples were annealed in air using a muffle furnace at 500 °C for five hours. The x-ray diffraction technique was used to study the structural aspects. A comparative analysis of the microstructure was conducted utilizing the Scherrer method, the Williamson-Hall method and its various models, size-strain analysis, and the Halder-Wagner method. The crystallite size and microstrain were determined using these distinct methods, revealing a systematic correlation between the crystallite size and microstrain obtained through the different techniques.