Enhancing visible light photocatalytic activity of holmium doped g-C3N4 and DFT theoretical insights.

In the search of novel photocatalysts to increase the effect of visible light in photocatalysis, g-C3N4 (CN) has become a shining star. Rare earth metals have been used as dopant material to reinforce the photocatalytic activity of CN due to their unique electron configuration recently. In this present study, the pure and different amounts of Ho-doped g-C3N4 (HoCN) photocatalysts were successfully synthesized using urea as a precursor by the one-pot method. Morphological, structural, optical, and vibrational properties of the synthesized photocatalysts were characterized by SEM, EDX, XRD, TGA, XPS, FTIR, PL, TRPL, Raman, DRS, and BET analyses. In addition, theoretical calculations using density functional theory (DFT) were meticulously carried out to delve the changes in the structural and electronic structure of CN with holmium doping. According to calculations, the chemical potential, electrophilicity, and chemical softness are higher for HoCN, while HOMO-LUMO gap, dipole moment, and the chemical hardness are lower for the pure one. Thus, holmium doping becomes desirable with low chemical hardness which indicates more effectivity and smaller HOMO-LUMO gap designate high chemical reactivity. To determine the photocatalytic efficiency of the pure and doped CN photocatalysts, the degradation of methylene blue (MB) was monitored under visible light. The results indicate that holmium doping has improved the photocatalytic activities of CN samples. Most strikingly, this improvement is noticeable for the 0.2 mmol doped CN sample that showed two times better photocatalytic activity than the pure one.

Dual-Atom P-Co-Dy Charge-Transfer Bridge on Black Phosphorus for Enhanced Photocatalytic CO2 Reduction.

The synergistic effect of rare earth single-atoms and transition metal single-atoms may enable us to achieve some unprecedented performance and characteristics. Here, Co-Dy dual-atoms on black phosphorus with a P-Co-Dy charge-transfer bridge are designed and fabricated as the active center for the CO2 photoreduction reaction. The synergistic effect of Co-Dy on the performance of black phosphorus is studied by combining X-ray absorption spectroscopy, ultrafast spectral analysis, and in situ technology with DFT calculations. The results show that the Co and Dy bimetallic active site can promote charge transfer by the charge transfer bridge from P to Dy, and then to Co, thereby improving the photocatalytic activity of black phosphorus. The performance of catalysts excited at different wavelength light indicates that the 4G11/2/2I15/2/4F9/2→6H15/2 and 4F9/2→6H13/2 emissions of Dy can be absorbed by black phosphorus to improve the utilization of sunlight. The in situ DRIFTS and density functional theory (DFT) calculations are used to investigate the CO2 photoreduction pathway. This work provides an depth insight into the mechanism of dual-atom catalysts with enhanced photocatalytic performance, which helps to design novel atomic photocatalysts with excellent activity for CO2 reduction reactions.

Directional Electron Flow in a Selenoviologen-Based Tetracationic Cyclophane for Enhanced Visible-Light-Driven Hydrogen Evolution.

Directional electron flow in the photocatalyst enables efficient charge separation, which is essential for efficient photocatalysis of H2 production. Here, we report a novel class of tetracationic cyclophanes (7) incorporating bipyridine Pt(II) and selenoviologen. X-ray single-crystal structures reveal that 7 not only fixes the distances and spatial positions between its individual units but also exhibits a box-like rigid electron-deficient cavity. Moreover, host-guest recognition phenomena are observed between 7 and ferrocene, forming host-guest complexes with a 1:1 stoichiometry in MeCN. 7 exhibits good redox properties, narrow energy gaps, and strong absorption in the visible range (370-500 nm) due to containing two selenoviologen (SeV2+) units. Meanwhile, the femtosecond transient absorption (fs-TA) reveals that 7 has stabilized dicationic biradical, efficient charge separation, and facilitates directional electron flow to achieve efficient electron transfer due to the formation of rigid cyclophane and electronic architecture. Then, 7 is applied to visible-light-driven hydrogen evolution with high hydrogen production (132 µmol), generation rate (11 µmol/h), turnover number (221), and apparent quantum yield (1.7%), which provides a simplified and efficient photocatalytic strategy for solar energy conversion.

Innovative Bi5O7I/MIL-101(Cr) Compounds: A Leap Forward in Photocatalytic Tetracycline Removal.

In environmental chemistry, photocatalysts for eliminating organic contaminants in water have gained significant interest. Our study introduces a unique heterostructure combining MIL-101(Cr) and bismuth oxyiodide (Bi5O7I). We evaluated this nanostructure's efficiency in adsorbing and degrading tetracycline (TC) under visible light. The Bi5O7I@MIL-101(Cr) composite, with a surface area of 637 m2/g, prevents self-aggregation seen in its components, enhancing visible light absorption. Its photocatalytic efficiency surpassed Bi5O7I and MIL-101(Cr) by 33.4 and 9.2 times, respectively. Comprehensive analyses, including scanning electron microscopy (SEM) and transmission electron microscopy (TEM), confirmed the successful formation of the heterostructure with defined morphological characteristics. BET analysis demonstrated its high surface area, while X-ray diffraction (XRD) confirmed its crystallinity. Electron spin resonance (ESR) tests showed significant generation of reactive oxygen species (ROS) like h+ and·â€¢O2- under light, crucial for TC degradation. The material maintained exceptional durability over five cycles. Density functional theory (DFT) simulations and empirical investigations revealed a type I heterojunction between Bi5O7I and MIL-101(Cr), facilitating efficient electron-hole pair separation. This study underscores the superior photocatalytic activity and stability of Bi5O7I@MIL-101(Cr), offering insights into designing innovative photocatalysts for water purification.

Titania-zeolite composite for tetracycline photocatalytic degradation under visible light: A comparison between doping and ion exchange.

In this study, TiO2 supported over embryonic Beta zeolite (BEA) was prepared for the photocatalytic degradation of Tetracycline (TC) antibiotic under visible light. The immobilization of sol-gel TiO2 over the zeolite increased its surface area from 33 (m2/g) to 226 (m2/g) and enhanced its adsorption efficiency from 8 % to 18 %. In order to expand the photocatalytic activity of TiO2 towards the visible light region (i.e. λ > 380 nm), two different metal sensitization techniques with Iron ions from aqueous solution of FeCl3 were explored. In the ion-exchange method, the substitutional cations within the TiO2/BEA structure were exchanged with Fe3+. Whereas, in the doping technique, solgel TiO2 was doped with Fe3+ during its synthesis and before its immobilization over Zeolite. Four different samples with 20, 40, 60, and 100 % w/w of TiO2/BEA ratio were prepared. After testing the various ion-exchanged photocatalysts under blue and white lights, only Fe-60%TiO2/BEA showed better activity compared to pure TiO2 under white light at TC initial concentration, C o = 20 ppm. For the doped immobilized Titania with 60 wt% TiO2/BEA, three different doped photocatalysts were prepared with 3 %, 7 %, and 10 % per mole Fe/TiO2. All the Fe-doped TiO2/BEA photocatalysts showed better activity compared to pure TiO2 under white light. Under solar irradiations, the 3 % Fe-doped TiO2/BEA was able to degrade all TC within 120 min, while Fe-60%TiO2/BEA needed 200 min, and TiO2 needed more than 300 min. This enhanced performance was a result of both increased surface area due to immobilization over BEA as well as iron doping by Fe3+ that simultaneously increased the visible light absorption of TiO2 and minimized the charge carrier recombination effect.

Iron single atoms anchored on ultrathin carbon nitride photocatalyst for visible light-driven water decontamination.

Graphitic carbon nitride has gained considerable attention as a visible-light photocatalyst. However, its photocatalytic efficiency is restricted by its limited capacity for absorbing visible light and swift recombination of charge carriers. To overcome this bottleneck, we fabricated an atomic Fe-dispersed ultrathin carbon nitride (Fe-UTCN) photocatalyst via one-step thermal polymerization. Fe-UTCN showed high efficiency in the photodegradation of acetaminophen (APAP), achieving > 90 % elimination within 60-min visible light irradiation. The anchoring of Fe atoms improved the photocatalytic activity of UTCN by narrowing the bandgap from 2.50 eV to 2.33 eV and suppressing radiative recombination. Calculations by density functional theory revealed that the Fe-N4 sites (adsorption energy of - 3.10 eV) were preferred over the UTCN sites (adsorption energy of - 0.18 eV) for the adsorption of oxygen and the subsequent formation of O2•-, the dominant reactive species in the degradation of APAP. Notably, the Fe-UTCN catalyst exhibited good stability after five successive runs and was applicable to complex water matrices. Therefore, Fe-UTCN, a noble-metal-free photocatalyst, is a promising candidate for visible light-driven water decontamination.

Plasmon AgNPs/MoS2/ZnO nanorods array ternary heterojunctions enabling high-efficiency solar-light energy utilization for photocatalysis and recyclable SERS detection.

BACKGROUND: Surface-enhanced Raman scattering (SERS) has gained widespread use in molecule-level detection benefiting from its high sensitivity, nondestructive data acquisition, and capacity for providing molecular fingerprint information. However, the strong adhesion of target molecules to the substrate (known as the "memory effect") inherently hinders the reusability of SERS substrates. Research has shown that self-cleaning SERS substrates based on versatile semiconductor materials with SERS enhancement capabilities and solar photocatalytic properties offer an effective platform for the sensitive detection and degradation of harmful molecules. RESULTS: In this research, a resuable SERS-active substrate was facilely fabricated by anchoring silver nanoparticles (AgNPs) to the edges of MoS2 nanosheet decorated on ZnO nanorod arrays (NRAs). This innovative design exhibited a remarkable SERS enhancement factor (EF) of 4.6 × 107 and demonstrated significant solar photocatalytic efficiency. Such superior characteristics of ternary plasma heterojunction were ascribable to the synergistic effect of the "Schottky barrier" and "hot spots" between MoS2 and AgNPs, the inherent chemical enhancement proficiency of the MoS2/ZnO NRAs heterojunction, as well as the ultrafast electron transfer within the ternary heterojunction. SIGNIFICANCE: The developed ternary heterojunction substrate enabled highly sensitive SERS detection of trace amounts of organic molecules. Moreover, this SERS substrate exhibited self-cleaning and recyclability via solar-light-driven photocatalysis. This bifunctional recyclable SERS substrate proved capable of meeting various requirements for routine monitoring of environmental organic pollutants and provided a robust avenue for advancing energy utilization materials that serve as high-performance SERS sensors and catalysts.

A Novel Perspective on Enhancing Photocatalytic Performance through the Synergistic Effect of Nd Single Atoms and Heterostructures.

There are few reports on lanthanide single atom modified catalysts, as the role of the 4f levels in photocatalysis is difficult to explain clearly. Here, the synergistic effect of 4f levels of Nd and heterostructures is studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations based on the construction of Nd single atom modified black phosphorus/g-C3N4 (BP/CN) heterojunctions. As expected, the generation rates of CO and CH4 of the optimized heterostructure are 7.44 and 6.85 times higher than those of CN, and 8.43 and 9.65 times higher than those of BP, respectively. The Nd single atoms can not only cause surface reconstruction and regulate the active sites of BP, but also accelerate charge separation and transfer, further suppressing the recombination of electron-hole pairs. The electrons can transfer from g-C3N4:Nd to BP:Nd, with a transfer time of ≈11.4 ps, while the radiation recombination time of electron-hole pairs of g-C3N4 is ≈26.13 µs, indicating that the construction of heterojunctions promotes charge transfer. The 2P1/2/2G9/2/4G7/2/2H11/2/4F7/2→4I9/2 emissions from Nd3+ can also be absorbed by heterostructures, which improves the utilization of light. The energy change of the key rate measurement step CO2 *→COOH* decreases through Nd single atom modification.

Photocatalytic Optical Hollow Fiber with Enhanced Visible-light-driven CO2 Reduction.

A visible-light-driven CO2 reduction optical fiber is fabricated using graphene-like nitrogen-doped composites and hollow quartz optical fibers to achieve enhanced activity, selectivity, and light utilization for CO2 photoreduction. The composites are synthesized from a lead-based metal-organic framework (TMOF-10-NH2) and g-C3N4 nanosheet (CNNS) via electrostatic self-assembly. The TMOF-10-NH2/g-C3N4 (TMOF/CNNS) photocatalyst with an S-type heterojunction is coated on optical fiber. The TMOF/CNNS coating, which has a bandgap energy of 2.15 eV, has good photoinduced capability at the coating interfaces, high photogenerated electron-hole pair yield, and high charge transfer rate. The conduction band potential of the TMOF/CNNS coating is more negative than that for CO2 reduction. Moreover, TMOF facilitates the CO desorption on its surface, thereby improving the selectivity for CO production. High CO2 photoreduction and selectivity for CO production is demonstrated by the TMOF/CNNS-coated optical fiber with the cladding/core diameter of 2000/1000 µm, 10 wt% TMOF in CNNS, coating thickness of 25 µm, initial CO2 concentration of 90 vol%, and relative humidity of 88% RH under the excitation wavelength of 380-780 nm. Overall, the photocatalytic hollow optical fiber developed herein provides an effective and efficient approach for the enhancement of light utilization efficiency of photocatalysts and selective CO2 reduction.

Three-dimensional donor-acceptor conjugated porous polymers based on metal-porphyrin and triazine for highly effective photodegradation of organic pollutants in water.

Three-dimensional donor-acceptor (D-A) type conjugated porous polymers (CPPs) was designed and synthesized via imine condensation of copper tetraaminoporphyrin (CuTAPP) as donor and 1,3,5-tris-(4-formyl phenyl) triazine (TFPT) as acceptor, named as CuPT-CPP. The CuPT-CPP possesses a high specific surface area (73.7 m2/g) and excellent photophysical properties. The simultaneous introduction of the organometallic molecules and D-A structures in CuPT-CPP could be broadened the visible-light response range (400-800 nm) and facilitated efficient photogenerated carrier separation and transportation. As heterogeneous photocatalysts, CuPT-CPP has excellent photocatalytic performances under visible light irradiation, leading to excellent model pollutant rhodamine B degradation efficiency up to about 100% in 3 h, it has superb stability and reusability during the photocatalytic processes, and CuPT-CPP also exhibited broad substrate adaptability, which could photocatalytic degradation of methylene blue (MB), methyl orange (MO), and tetracycline hydrochloride (TC). This work indicates that three-dimensional D-A type porphyrin- and triazine-based CuPT-CPP has great potential in the practical application of photocatalysis.

Mn3O4/ZnO-Al2O3-CeO2 mixed oxide catalyst derived from Mn-doped Zn-(Al/Ce)-LDHs: efficient visible light photodegradation of clofibric acid in water.

Mn3O4/ZnO-Al2O3-CeO2 catalyst was synthesized through a solid-state process from a 3% Mn-doped Zn-(Al/Ce) layered double hydroxide structure. Detailed structural and optical characterization using XRD, FTIR, UV-visible DRS, and TEM was conducted. By investigating clofibric acid (CA) degradation in aqueous solution, Mn3O4/ZnO-Al2O3-CeO2 photocatalytic activity was evaluated. The results show that the heterostructure mixed oxide catalyst has excellent CA photodegradation performance. Further, the characterization reveals that such photocatalytic efficiency can be attributed to two facts that are summarized in the optical properties and the synergic effect between Mn and Ce elements. The sample demonstrated a narrow band gap of 2.34 eV based on DRS. According to the experimental results of the photodegradation, after 120 min of irradiation, the photocatalyst exhibited the highest photocatalytic activity, with a degradation efficiency of 93.6%. Optimization outcomes indicated that maximum degradation efficiency was attained under the following optimum conditions: catalyst dose of 0.3 g/L, initial dye concentration of 20 mg/L, pH 3.86, and 120 min of reaction time. The quenching test demonstrates that photogenerated electrons and superoxide radicals are the most powerful reactive species. The catalyst could be useful in decreasing the photogenerated charges recombination, which offers more redox cycles simultaneously during the catalytic process. The strong Ce-Mn interaction and the formation of their different oxidation states offer a high degradation efficiency by facilitating electron-hole transfer. The introduction of Mn3O4 in the catalyst can effectively improve the visible absorption properties, which are beneficial in the photocatalytic process by reaching a high catalytic efficiency at a low cost.

High-efficiency photocatalytic CO2 reduction enabled by interfacial Ov and isolated Ti3+ of g-C3N4/TiO2 Z-scheme heterojunction.

Exploring the real force that drives the separation of Coulomb-bound electron-hole pairs in the interface of heterojunction photocatalysts can establish a clear mechanism for efficient solar energy conversion efficiency. Herein, the formation of oxygen vacancy (Ov) and isolated Ti3+ was precisely regulated at the interface of g-C3N4/TiO2 Z-scheme heterojunction (g-C3N4/Ov-Ti3+-TiO2) by optimizing the opening degree of the calcination system, showing excellent production rate of CO and CH4 from CO2 photoreduction under visible light. This photocatalytic system also exhibited prominent stability. Combining theoretical calculation and characterization, the introduction of Ov and isolated Ti3+ on the interface could construct a charge transfer channel to break the forbidden transition of n â†’ π*, improving the separation process of photoexcited electron-hole pairs. The photoexcited electrons weakened the covalent interaction of CO bonds to promote the activation of adsorbed inert CO2 molecules, significantly reducing the energy barrier of the rate-limiting step during CO2 reduction. This work demonstrates the great application potential of reasonably regulating heterojunction interface for efficient photocatalytic CO2 reduction.

Synergistic photocatalysis of a hydrochar/CeO2 composite for dye degradation under visible light.

The synthesis and characterization of a hydrochar/CeO2 composite along with its evaluation in methylene blue degradation under visible light are presented. The methodology consisted of a single-pass hydrothermal method, having as synthesis conditions 9 h of reaction time, 210 °C, autogenous pressure, and a biomass/CeO2 ratio of 100:1. The composite characterization revealed good dispersion of CeO2 in the carbonaceous matrix and significant synergy in the composite activation using visible irradiation. The photodegradation experiments showed an efficiency of 98% for white LED light, 91% for UV light, 96% for solar irradiation, and 85% for blue LED light using as conditions pH 7.0, 50 mg of composite, 50 mL of solution, 10 mg/L of dye initial concentration, and 120 min of contact time. Meanwhile, the reusability experiments evidenced a reuse capacity of up to five times with a constant photodegradation efficiency (99%); moreover, it was determined that the presence of electrolytes at pH below 7.0 during degradation negatively affected methylene blue degradation. Finally, the results of this work demonstrate that the hydrochar/CeO2 composite can be synthesized by a green method and used for the efficient treatment of water contaminated with methylene blue.

Bi2Fe4O9/rGO nanocomposite with visible light photocatalytic performance for tetracycline degradation.

Bismuth-iron semiconductor materials have been widely studied in the photocatalytic field due to their excellent light responsiveness. Among them, the potential and mechanism regarding photocatalytic degradation of organic pollutants by Bi2Fe4O9 are seriously ignored. In this research, Bi2Fe4O9/reduced graphene oxide (BFO/rGO) was successfully synthesized for tetracycline (TC) removal. Under visible light irradiation, the TC degradation efficiency reached 83.73% within 60 min, which was much higher than that of pure BFO or rGO. The impacts of crucial factors (TC initial concentration, humic acid concentration, pH value and inorganic anions) were systematically analyzed. The photoelectric performance experiments indicated that the addition of rGO decreased the electron-hole pair recombination efficiency and improved the charge transfer efficiency, thus significantly enhancing the photocatalytic performance. According to quenching experiments and EPR (Electron Paramagnetic Resonance) analysis, superoxide radical (•O2-) and hole (h+) were determined as the main active species during degradation reactions. Eventually, the possible degradation routes of TC were presented by identifying intermediates.

Utilization of waste beverages for achieving carbon-based core-shell nanostructures of high visible light photocatalytic performance.

Waste beverages are utilized as resources in various valuable, albeit energy-consuming, waste-to-energy processes. There is a growing need for alternative cost-effective methods to harness their potential. This study explored the feasibility of employing waste beverages as feedstock for the counterpart component of a TiO2-based composite photocatalyst. Several commonly available carbonated soft drinks from the Japanese market have been investigated to achieve this goal. The investigation revealed that a mild hydrothermal treatment condition could transform all examined beverages into carbonaceous materials suitable for fabricating a core-shell structure with TiO2, resulting in a remarkably efficient visible light active photocatalyst. Notably, a pH-adjusted photocatalyst derived from Coca Cola® exhibited superior visible light photodegradability toward dye molecules and enhanced bactericidal efficacy compared to the counterpart derived from pure sucrose. The heightened visible light photocatalytic activity can be attributed to the distinctive carboxy-rich surface functional groups, based on the findings of experimental analyses and density functional theory calculations. The bidentate-type bonding of these groups with TiO2 induces a modified interfacial bond structure that facilitates the efficient transfer of photoexcited carriers. This study presents a novel avenue for the effective utilization and recycling of waste beverages, and adds value under environmentally benign conditions.

Effect of synthesis methodologies upon the photocatalytic performance of Bi0.5Na0.5TiO3 for pollutant degradation.

In the face of mounting environmental concerns, we must seek out innovative solutions for remediation. Using nanomaterials to degrade organic pollutants in water under ambient visible light holds great promise as a safe, cost-efficient, and effective approach to addressing pollution in our water bodies. The development of novel materials capable of such pollution degradation is desired to preserve the environment. In this study, Bi0.5Na0.5TiO3 (BNT) nanoparticles are synthesized through hydrothermal and solid-state routes, and their physicochemical properties are compared to assess their photocatalytic performance. The results of the characterization studies indicate that the hydrothermally synthesized nanoparticles outperformed the solid-state synthesized counterparts in terms of photocatalytic performance. The photocatalytic degradation of Rhodamine blue dye under ambient light exposure is examined at various dye concentrations and catalyst dosages. BNT nanoparticles demonstrated excellent photocatalytic properties, stability, and recyclability, making them a promising candidate for various photocatalytic applications. The findings of this study could pave the way for the development of sustainable and environmentally friendly photocatalytic technologies for water remediation.

Recent advances in visible light driven inactivation of bloom forming blue-green algae using novel nano-composites: Mechanism, efficiency and fabrication approaches.

Over the years, algae have proved to be a water pollutant due to global warming, climate change, and the unregulated addition of organic compounds in water bodies from diffused resources. Harmful algal blooms (HABs) are severely affecting the health of humans and aquatic ecosystems. Among available anti-blooming technologies, semiconductor photocatalysis has come forth as an effective alternative. In the recent past, literature has been modified extensively with a decisive knowledge regarding algal invasion, desired preparation of nanomaterials with enhanced visible light absorption capacity and mechanisms for algal cell denaturation. The motivation behind this review article was to gather algal inactivation data in a systematic way based on various research studies, including the construction of nanoparticles and purposely to test their anti-algal activities under visible irradiation. Additionally, this article mentions variety of starting materials employed for preparation of various nano-powders with focus on their synthesis routes, analytical techniques as well as proposed mechanisms for lost cellular integrity in context of reduced chlorophyll' a' level, cell rapture, cell leakage and damages to other physiological constituents; credited to oxidative damage initiated by reactive oxidation species (ROS). Various floating and recyclable composited catalysts Ag2CO3-N: GO, Ag/AgCl@ZIF-8, Ag2CrO4-g-C3N4-TiO2/mEP proved to be game-changers owing to their enhanced VL absorption, adsorption, stability, separation and reusability. An outlook for the generalized limitations of published reports, cost estimations for practical implementation, issues and challenges faced by nano-photocatalysts and possible opportunities for future studies are also proposed. This review will be able to provide vast insights for coherent fabrication of catalysts, breakthroughs in experimental methodologies and help in elaboration of damage mechanisms.

Silver doped barium titanate nanoparticles for enhanced visible light photocatalytic degradation of dyes.

Due to the rapid growth of global population, new, fast and reliable methods must be developed to purify contaminated water. Various photocatalysts have been developed to remove organic dyes from water. Herein, Ag doped BaTiO3 has been synthesized using a facile solvothermal method and its excellent photocatalytic activities were demonstrated in degradation of both anionic and cationic dyes under visible light illumination. Ag doped BaTiO3 nanoparticles showed greater efficacy in the degradation of methylene blue (MB) and eosin yellow (EY) than undoped BaTiO3 nanoparticles, which makes them a better candidate for photocatalysis. 1.0 AgBT sample showed the highest photocatalytic activity for MB (99.1 % in 100 min) and EY (99.3 % in 60 min) dye degradation compared with those of other samples. Further, the trapping experiments revealed that hydroxyl radicals and holes are the active species in the photocatalytic process of MB and EY dye degradation and recycle test showed excellent stability of the synthesized material.

NH2-MIL-125-Derived N-Doped TiO2@C Visible Light Catalyst for Wastewater Treatment.

The utilization of titanium dioxide (TiO2) as a photocatalyst for the treatment of wastewater has attracted significant attention in the environmental field. Herein, we prepared an NH2-MIL-125-derived N-doped TiO2@C Visible Light Catalyst through an in situ calcination method. The nitrogen element in the organic connector was released through calcination, simultaneously doping into the sample, thereby enhancing its spectral response to cover the visible region. The as-prepared N-doped TiO2@C catalyst exhibited a preserved cage structure even after calcination, thereby alleviating the optical shielding effect and further augmenting its photocatalytic performance by increasing the reaction sites between the catalyst and pollutants. The calcination time of the N-doped TiO2@C-450 °C catalyst was optimized to achieve a balance between the TiO2 content and nitrogen doping level, ensuring efficient degradation rates for basic fuchsin (99.7%), Rhodamine B (89.9%) and tetracycline hydrochloride (93%) within 90 min. Thus, this study presents a feasible strategy for the efficient degradation of pollutants under visible light.

CuS/Bi2O3 composites activating PMS under visible light for efficient degradation of antibiotic tetracycline.

CuS/Bi2O3 composite photocatalyst was prepared by calcination and in situ precipitation, and peroxymonosulfate (PMS) was applied to the degradation of tetracycline (TC) wastewater under visible light. The microscopic morphology, chemical composition, and optical properties of the composites were investigated by characterization means of XRD, FTIR, SEM, XPS, and UV-Vis DRS. The results showed that the introduction of CuS increased the specific surface area of Bi2O3 and increased the visible absorption boundary of Bi2O3 from 455 to 524 nm, which effectively inhibited the complexation of photogenerated electron-hole pairs. The experimental results showed that the introduction of PMS strengthened the removal of TC from the composites, and 95% of TC could be removed under visible light irradiation, and the reaction rate was 8.22 times higher than that of the unspiked PMS, indicating that the BC-15+vis/PMS catalytic system could degrade the pollutants efficiently. The radical capture experiments showed that several radicals, including ·OH, SO4·-, ·O2-, h+, and 1O2, were present in the catalytic system as the main active species to degrade TC, and the mechanism of photocatalytic activation of PMS by Z-type heterostructures of CuS/Bi2O3 composites was proposed. The present study showed that BC-15 has excellent degradation performance and stability, which provides new ideas for the treatment of antibiotic wastewater.