Anatomic total shoulder arthroplasty for posteriorly eccentric and concentric osteoarthritis: a comparison at a minimum 5-year follow-up.

BACKGROUND: In patients with glenohumeral osteoarthritis and posteriorly eccentric wear patterns, the early to midterm results of total shoulder arthroplasty (TSA) using conservative glenoid reaming with no attempt at version correction have been favorable at early follow-up. The purpose of this study is to compare the clinical and radiographic outcomes of TSA using this technique for patients with and without eccentric wear patterns at a minimum 5-year follow-up. METHODS: Patients who underwent TSA with minimum 5-year follow-up were identified from an institutional registry. Preoperative and postoperative radiographs were used to determine humeroglenoid alignment (HGA-AP), humeroscapular alignment (HSA-AP), version, Walch classification, and glenoid component seating. The outcome measures were the Simple Shoulder Test (SST), glenoid component radiolucencies, and the occurrence of complications or revisions. RESULTS: Two hundred ten patients were included in the study, of which 98 (47%) had posteriorly decentered humeral heads and 108 (51%) had centered humeral heads. There were 77 shoulders with Walch type A glenoids and 122 with Walch type B glenoids. At a mean 8-year follow-up, the final SST score, change in SST score, and percentage of maximal improvement was not correlated with pre- and postoperative humeral head centering, Walch classification, or glenoid version. There were no preoperative predictors of a low final SST score. Two patients (1%) underwent open reoperations during the study period. In patients with Walch B1 and B2 glenoids (n = 110), there were no differences in outcome measures between patients with postoperative retroversion of more and less than 15°. Although 15 of 51 patients (29%) with minimum 5-year radiographs had glenoid radioluciences, these radiographic findings were not associated with inferior clinical outcomes. On multivariable analysis, glenoid component radiolucencies were most strongly associated with incomplete component seating (OR 3.3, P = .082). CONCLUSION: The results of TSA with conservative glenoid reaming without attempt at version correction are favorable at a minimum 5-year, and mean 8-year, follow-up. There were no differences in clinical and radiographic outcomes between patients with eccentric and concentric wear patterns. Incomplete glenoid component seating was the greatest predictor of glenoid component radiolucency, but these radiolucencies were not associated with inferior clinical outcomes.

Anatomic total shoulder arthroplasty for B2 glenoids treated with asymmetric reaming has equivalent survivorship and patient outcomes compared with type A glenoids at a mean 9-year follow-up.

BACKGROUND: Walch B2 glenoids can present a challenge to shoulder arthroplasty surgeons. Short-term studies have demonstrated that corrective reaming to 10° of retroversion in anatomic total shoulder arthroplasty (aTSA) can result in good outcomes; however, there is little data reporting the long-term outcomes in this cohort. B2 glenoids treated with high-side reaming present a theoretical risk of early glenoid component failure as one may ream into the subchondral bone. This study aimed to demonstrate that (1) B2 glenoids treated with corrective reaming have durable results and (2) offer similar results to Walch A1/2 in long-term follow-up. METHODS: Patients who underwent aTSA by a single surgeon (E.L.F.) were identified from a shoulder arthroplasty registry. Inclusion criteria included Walch A1, A2, or B2 glenoid; a diagnosis of primary shoulder osteoarthritis; and a minimum radiographic and clinical follow-up of 5 years. Forty-three patients with B2 glenoids were compared to a cohort of 42 patients with A1 or A2 glenoids. Preoperative computed tomography (CT) and radiographs were used to assess deformity, glenoid version, and posterior subluxation of the humeral head. Postoperatively, patients were assessed with radiographs and patient-reported outcome measures including American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score, Simple Shoulder Test (SST) score, and visual analog scale (VAS). RESULTS: Eighty-five shoulders (82 patients, 42 B2 and 43 A1/A2 glenoids) with an average follow-up of 9.4 years were included. In the B2 cohort, the average retroversion was 21.1° and posterior subluxation was 69.4% compared with 10.6° (P < .001) and 57.5% (P < .001), respectively, in the A1 or A2 cohort. The cohort demographics were similar except for male sex (B2 69.8% vs. A1 or A2 37.2%, P = .008). There was no difference between the cohorts in their improvement in ASES (P = .807), SST (P = .586), and VAS (P = .930) scores. There was no difference in lateral humeral offset (P = .889) or acromial humeral interval (P = .468) between initial postoperative and final follow-up visits. Survivorship for B2 glenoids was 97.6%, 94.1%, and 73.3% at 5, 10, and 15 years, respectively, compared with 97.6%, 91.9%, and 83.5% in type A glenoids. The revision rate was similar between the 2 groups (P = .432). Lazarus score (P = .682) and rates of humeral radiolucency (P = .366) and humeral osteolysis (P = .194) were similar between the 2 cohorts at final follow-up. CONCLUSION: Asymmetric reaming of patients with B2 glenoids is a reliable method of glenoid preparation with excellent mid- to long-term clinical results, patient-reported outcomes, and low revision rates similar to their A1 and A2 counterparts.

Total shoulder arthroplasty in patients with a B2 glenoid addressed with corrective reaming: mean 8-year follow-up.

BACKGROUND: The management of Walch B2 glenoid deformities in primary glenohumeral osteoarthritis is frequently debated. Previous literature has shown that the treatment of B2 glenoids with high-side reaming and anatomic total shoulder arthroplasty (aTSA) perform well in the short-term but is associated with an increased glenoid component failure rate in severe deformities. Therefore, many have explored alternative options, including augmented anatomic glenoid components and reverse shoulder arthroplasty. Our goal in this study is to provide mid-term radiographic and clinical outcomes after high-side reaming and aTSA for B2 glenoids. METHODS: Patients were followed both clinically and radiographically. Preoperative computed tomography scans were used for retrospective analysis of deformity. Both preoperative and postoperative visual analog scale pain, American Shoulder and Elbow Surgeons score, and Simple Shoulder Test scores were collected. Radiographs were analyzed preoperatively and postoperatively for humeral head decentering relative to the glenoid vault, immediate glenoid seating, and final glenoid peg radiolucency. RESULTS: Of the original cohort of 59 patients (6 now deceased) reported at a mean radiographic follow-up of 3.4 years, 34 shoulders in 33 patients with B2 glenoids (mean retroversion 18.9°, range 4°-32°) were available for follow-up at a mean of 8.6 years (range 5.5-11.2) after high-side glenoid reaming with aTSA. Three (5.1%) of the original 59 shoulder were revised. At final follow-up, 3 of 30 (10.0%) shoulders had radiographic glenoid component failure, but were unrevised. Glenoid component failure was associated with worse initial glenoid component seating (mean Lazarus score 1.2 vs. 2.0, P = .002). Glenoid failure was also associated with increased posterior humeral head subluxation at 2-4 year follow-up (mean 5.6% vs. 12.6%, P = .045) and at final follow-up (mean 7.0% vs. 21%, P = .002). There was no association between glenoid component failure and preoperative retroversion, inclination, or humeral head subluxation (all P > .05). Glenoid component failure was associated with worse American Shoulder and Elbow Surgeons (88 vs. 73) and visual analog scale pain (0.8 vs. 2.1) scores (both P = .03). CONCLUSIONS: At a mean of 8.6 years, 88% of shoulders available for follow-up had well-fixed glenoid components. Glenoid component failure was associated with poor initial glenoid component seating, with failed components having an average of 25% of the glenoid component not seated. Preoperative deformity such as glenoid retroversion, inclination, or humeral head subluxation did not predict glenoid component failure. This study supports that initial glenoid component seating and recurrence of posterior humeral head subluxation may be the most important factors for mid-term glenoid component survival in aTSA in patients with B2 glenoids.

Anatomic vs. reverse shoulder arthroplasty for the treatment of Walch B2 glenoid morphology: a systematic review and meta-analysis.

Background: Walch B2 glenoid morphology with glenohumeral osteoarthritis is a difficult degenerative pattern to manage for shoulder surgeons. Anatomic total shoulder arthroplasty (TSA) in combination with eccentric reaming or bone grafting are the traditional methods of treatment. Newer approaches such as TSA with posteriorly augmented glenoid components and reverse shoulder arthroplasty (RSA) may offer better stability for the posteriorly subluxated biconcave B2 wear pattern. The aim of this systematic review is to compare mid-term surgical and functional outcomes of Walch B2 glenoids without significant rotator cuff pathology treated with TSA and RSA. Methods: The review was performed according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines by searching the MEDLINE (PubMed) and Embase (Elsevier) databases. Inclusion criteria were clinical studies that evaluated the outcomes and complications of TSA or RSA in the setting of B2 glenoid morphology without significant rotator cuff pathology. Data relevant to TSA and RSA surgical outcomes were extracted and compiled, and outcomes were compared. A meta-analysis of proportions of complication and revision rates among TSA and RSA groups was performed. Results: Overall, 16 articles were included with 414 TSAs and 78 RSAs. The average follow-up duration was 54.1 ± 14.8 months for patients undergoing TSA and 44.8 ± 10.1 months for patients undergoing RSA. The TSA group was further subdivided based on the use of eccentric reaming (135 TSAs), an augmented glenoid component (84 TSAs), or bone grafting (11 TSAs) or was unspecified (184 TSAs). Overall, patients undergoing TSA and RSA demonstrated mean improvements of 50.1 ± 8.5° and 64.7 ± 5.2° in active flexion, 58.5 ± 10.3° and 68.9 ± not reported° in active abduction, and 31.3 ± 5.7° and 29.0 ± 10.2° in active external rotation, respectively. In regard to functional outcome scores, patients undergoing TSA and RSA showed mean Constant score improvements of 38.8 ± 5.3 and 46.6 ± 3.1 points and American Shoulder and Elbow Surgeons score improvements of 48.2 ± 1.0 and 49.2 ± 25.3 points, respectively. Results of the meta-analysis with mid-term follow-up data demonstrated pooled complication rates of 9% (95% confidence interval [CI], 1%-22%) for TSA and 6% (95% CI, 0%-28%) for RSA and pooled revision rates of 2% (95% CI, 0%-8%) for TSA and 1% (95% CI, 0%-15%) for RSA. Conclusion: In the setting of Walch B2 glenoid morphology, TSA with eccentric reaming or an augmented component yields comparable outcomes to RSA. Based on the patient's age, activity level, and expectations, both TSA and RSA can be considered a reasonable option to treat Walch B2 glenoid morphology.

Management of the B2 Glenoid in Glenohumeral Osteoarthritis.

The Walch B2 glenoid is characterized by a biconcave glenoid deformity, acquired glenoid retroversion, and posterior humeral head subluxation. Surgical reconstruction of the B2 glenoid remains a challenge. Surgical management options include arthroscopic debridement, hemiarthroplasty, anatomic total shoulder arthroplasty with eccentric reaming, bone grafting or augmented glenoid implants, and reverse total shoulder arthroplasty. Multiple factors dictate the optimal surgical management strategy.. This article describes each of these techniques and presents the current available literature in an effort to guide evidence-based decisions in the surgical management of the B2 glenoid deformity.

Multilevel glenoid morphology and retroversion assessment in Walch B2 and B3 types.

OBJECTIVE: A major factor that impacts the long-term outcome and complication rates of total shoulder arthroplasty is the preoperative posterior glenoid bone loss quantified by glenoid retroversion. The purpose of this study was to assess if glenoid retroversion varies significantly at different glenoid heights in Walch B2 and B3 glenoids. MATERIALS AND METHODS: Patients with B2 and B3 glenoid types were included following retrospective review of 386 consecutive CT shoulder studies performed for arthroplasty preoperative planning. True axial CT reconstructions were created using a validated technique. Two readers independently measured the glenoid retroversion angles according to the Friedman method using the "intermediate" glenoid at three glenoid heights: 75% (upper), 50% (equator), and 25% (lower). The variances between the three levels for a given patient were calculated. RESULTS: Twenty-nine B2 and 8 B3 glenoid types were included. There was no significant difference in variance of glenoid version among the three levels in B2 or B3 groups. The mean variance in retroversion degree between equator-lower, upper-equator, and upper-lower glenoid was - 0.4, 0.3, and - 0.2 for B2; and - 0.2, 1.9, and 1.9 for B3 glenoid, respectively. The level of inter-reader agreement was fair to good for variance at equator-lower, and good to excellent for upper-equator and upper-lower glenoid. CONCLUSIONS: Glenoid version can be accurately measured at any level between 25 and 75% of glenoid height for Walch B2 and B3. We recommend that the glenoid equator be used as the reference to assure consistent and reliable version measurements in this group of patients.

Autografting for B2 Glenoids.

The Walch B2 glenoid is characterized by a biconcave glenoid deformity, acquired glenoid retroversion, and posterior subluxation of the humeral head. Surgical reconstruction of the B2 glenoid is often challenging due to the complexity of the deformity. Bone graft augmentation using humeral head autograft is a valuable adjunct to anatomic total shoulder arthroplasty in the B2 glenoid, particularly in the young, highly active patient with severe glenoid retroversion (>25°-30°). Although this technique affords the ability to correct glenoid version and simultaneously enhances glenoid bone stock, it is technically challenging. The potential for graft-related complications also exists, which may further impact glenoid implant longevity and functional outcome. This review article aims to describe the B2 glenoid morphology, discuss the challenges in managing the B2 deformity, and provide further insight specifically regarding autografting at the time of anatomic total shoulder arthroplasty for reconstruction of the B2 glenoid.

Is the Walch B3 glenoid significantly worse than the B2?

BACKGROUND: The Walch B3 glenoid is theorized to be a progression of the B2 biconcave pattern. The present study aimed to compare glenoid indices between B2 and B3 patterns. We hypothesized that the B3 pattern would have significantly worse retroversion, inclination and medialization. METHODS: Computed tomography scans of 50 patients with B2 erosions [mean (SD) age 68 (9) years; 25 male] and 50 patients with B3 erosions [mean (SD) age 72 (8) years; 22 males] were converted into three-dimensional reconstructions. Retroversion, inclination, medialization and humeral head subluxation were compared. RESULTS: The data demonstrated no statistically significant differences [mean (SD)] between groups when assessing retroversion: B2 = 21 (8)°, B3 = 24 (7)° (p = 0.602); glenoid inclination: B2 = 9 (6)°, B3 = 8 (6)° (p = 0.967); or medialization: B2 = 12 (4) mm, B3 = 14 (4) mm (p = 0.384). In the B2 group, the mean (SD) humeral head subluxation was 80% (10%) according to the scapular plane and 55% (9%) according to the glenoid plane, which was not statistically different from the B3 group with a mean (SD) humeral head subluxation of 81% (7%) according to the scapular plane (p = 0.680) and 54% (7%) according to the glenoid plane (p = 0.292). CONCLUSIONS: These results demonstrated no significant differences between the B2 and B3 erosion patterns, with respect to the glenoid indicies measured. The aetiology of the B3 glenoid cannot be completely explained by progression of wear in a B2 glenoid.

Quantitative videographic analysis of intraoperative total shoulder arthroplasty is predictive of radiographic implant loosening.

BACKGROUND: It is believed that both patient and surgeon factors contribute to premature implant loosening. This video study was designed to answer the following questions: Can orthopedic surgeons reliably differentiate between procedures done well and those that will lead to early glenoid failure? Do the difficulty of the operation and the surgeon's performance predict a patient's outcome? Does the presence of a Walch B2 glenoid result in surgery that is evidently more difficult and performed in such a way to suggest early glenoid component failure? METHODS: Eleven upper extremity surgeons blindly graded a set of intraoperative videos of 15 total shoulder arthroplasty patients (grouped by outcome at 2 years). Evaluation questionnaires consisted of questions about the perceived difficulty and the surgeon's performance. Total and partial patient scores were calculated for each video. Higher calculated score would indicate worse postsurgical outcome. RESULTS: The loosening group had a significantly higher total score (P = .0057). Also, patients with B2 glenoids scored significantly higher than patients with other wear type. The analysis of overall procedure performance indicated difference between outcome groups (P = .0063). CONCLUSION: Our results indicate that surgeons could review surgical videos and differentiate the cases that were difficult or those that were more likely to lead to loosening of the glenoid component. The presence of a B2 glenoid was predictive of difficult surgery. The results of this study should serve as a starting point for surgeons interested in critically evaluating performance and also for those interested in finding ways to maximize patient outcomes after total shoulder arthroplasty.

Total shoulder arthroplasty using trabecular metal augments to address glenoid retroversion: the preliminary result of 10 patients with minimum 2-year follow-up.

BACKGROUND: Options to address glenoid retroversion include eccentric reaming, bone grafting, modifications to component shape, and reverse shoulder arthroplasty. Trabecular metal (TM) augments have been used extensively in the hip and knee to address bone deficiency in arthroplasty as part of a hybrid combination of high-density polyethylene, polymethyl methacrylate, and TM. This study presents the initial results of the use of specifically designed augments in the shoulder to address glenoid retroversion as part of total shoulder arthroplasty (TSA). MATERIALS: Ten patients (4 women and 6 men; aged 60 to 79 years) with Walch grade B2 or C glenoids have undergone TM glenoid augment insertion as part of a TSA, with a longer than 24-month follow-up. Patients received a 15° or 30° TM wedge to correct excessive glenoid retroversion before the glenoid component was cemented. Outcome analysis was performed preoperatively, at 3, 6, and 12 months, and yearly thereafter. RESULTS: All patients have been satisfied, and all scores have improved. There have been no complications and no hardware failures or displacement. All glenoid components were implanted to within 10° of neutral glenoid version. Radiographs at 24 months show good incorporation of the TM augment and the glenoid component. CONCLUSIONS: The TM augments have the advantage of immediate secure fixation, no tendency to collapse, and the ability to correct retroversion of 25° or more. This study confirms the successful short-term outcome of wedge-shaped TM augments to correct glenoid retroversion as part of TSA.