Acetabular dysplasia and posterior wall fractures: The missing link?

BACKGROUND: Traumatologists are unable to predict hip instability based on CT scans and standard radiographs in posterior wall (PW) fractures comprising <50-60 % of the wall, necessitating an examination under anesthesia (EUA). Risk factors for instability have not been clarified, but acetabular dysplasia has been theorized as a potential etiology. Unfortunately, dysplasia is difficult to evaluate in the traumatic setting. The purpose of this study was to compare acetabular morphology between unstable and stable fractures with a novel method to detect dysplasia. METHODS: Patients ≥ 18 years old with a PW fracture that underwent an EUA from 2013 to 2023 were retrospectively identified. For our experimental measurements, the axial distances on CT between the acetabular dome, lateral acetabular opening, and femoral head vertex were recorded. Acetabular geometry was quantified at these levels. Conventional dysplasia metrics (e.g., Tonnis angle) were obtained. Variables were compared between stable and unstable fractures. RESULTS: 58 patients met inclusion criteria with 42 stable versus 16 unstable fractures. Unstable fractures had higher distances between the acetabular dome and femoral head vertex (p > 0.05). They had more cranial fracture exit points (p = 0.0015), lower femoral head coverage (p = 0.0102), and lower posterior acetabular sector angles (p = 0.0281). No other differences in acetabular geometry, demographics, injury characteristics, or other markers of dysplasia were identified. CONCLUSIONS: Unstable hips demonstrated a more recessed acetabular dome when compared to stable hips. Posterior acetabular femoral head coverage and cranial fracture exit point may be related to hip instability. A larger sample size is needed to validate these findings.

[Translated article] Metal on metal total hip arthroplasty: Correlation between inclination of the acetabular and metal ion levels.

Due to their low friction index, hip arthroplasties with metal-metal (M-M) friction torque have been an attractive option in young patients with high functional demand, currently they have suffered a decrease in their use due to the complications of some models and physiological reactions adverse reactions related to the elevation of metal ions in the blood. Our objective is to review the patients with M-M pair operated in our centre, correlating the ion level with the position of the acetabular component and with the size of the head. MATERIAL AND METHODS: Retrospective review of 166 M-M hip prostheses operated between 2002 and 2011. Sixty five ruled out for different causes (death, loss of follow-up, no current ion control, no radiography or others), leaving a sample of 101 patients to be analysed. Follow-up time, cup inclination angle, blood ion level, Harris Hip Score (HHS), and complications were recorded. RESULTS: One hundred and one patients (25 women and 76 men), 55 years of average age (between 26 and 70), of these 8 were surface prostheses and 93 total prostheses. The mean follow-up time was 10 years (between 5 and 17 years). The mean head diameter was 46.25 (between 38 and 56). The mean inclination of the butts was 45.7° (between 26° and 71°). The correlation force between the verticality of the cup and the increase in ions is moderate r=0.31 for Cr and slight r=0.25 for Co. The correlation force between head size and ion increase is weak and inverse r=-0.14 for Cr and r=0.1 for Co. Five patients (4.9%) required revision (2 [1%] due to increased ions with pseudotumor). The mean time to revision was 6.5 years in which the ions increased. The mean HHS was 94.01 (between 55.8 and 100). In the review of patients, we found 3 with a significant increase in ions who had not followed controls, all 3 had an HHS of 100. The angles of the acetabular components were 69°, 60° and 48° and the diameter of the head was 48.42 and 48mm, respectively. DISCUSSION AND CONCLUSIONS: M-M prostheses have been a valid option in patients with high functional demand. A bi-annual analytical follow-up is recommended, since in our case we have detected 3 patients with HHS 100 who presented unacceptable elevation of cobalt >20µm/l (according to SECCA) of the ions and 4 with very abnormal elevation of cobalt ≥10µm/l (according to SECCA), all of them with cup orientation angles >50°. With our review we can conclude that there is a moderate correlation between the verticality of the acetabular component and the increase in blood ions and that the follow-up of this patient with angles >50° is essential.

Surgeon Estimations of Acetabular Cup Orientation Using Intraoperative Fluoroscopic Imagining Are Unreliable.

Background: Accurate acetabular cup orientation is associated with decreased revision rates and improved outcomes of primary total hip arthroplasty. This study assesses surgeon's ability to estimate both the acetabular component inclination and anteversion angles via intraoperative fluoroscopy (IF) images. Methods: We surveyed orthopedic surgeons to estimate acetabular component inclination and anteversion based on 20 IF images of total hip arthroplasty through a direct anterior approach. Postoperative computed-tomography scans were used to calculate the true inclination and anteversion component angles. The absolute difference between the true and estimated values was calculated to determine the mean and standard deviation of the survey results. Interrater reliability was determined through interclass correlation coefficients. Results: A majority of surgeons preferred the direct anterior approach (83.3%) and utilized IF during surgery (70%). Surgeons surveyed were on average 5.9° away from the true value of inclination (standard deviation = 4.7) and 8.8° away from the true value of anteversion (standard deviation = 6.0). Respondents were within 5° of both inclination and anteversion in 19.7% of cases, and within 10° in 57.3% of cases. All surgeons were determined to have poor reliability in estimating anteversion (interclass correlation coefficient < 0.5). Only 2 surgeons were determined to have moderate reliability when estimating inclination. Conclusions: Surgeons, when solely relying on IF for the estimation of anteversion and inclination, are unreliable. Utilization of other techniques in conjunction with IF would improve observer reliability.

Metal on metal total hip arthroplasty: Correlation between inclination of the acetabular and metal ion levels. / Artroplastias metal-metal en cadera: correlación entre el aumento de iones y el ángulo del componente acetabular.

Due to their low friction index, hip arthroplasties with metal-metal (M-M) friction torque have been an attractive option in young patients with high functional demand, currently they have suffered a decrease in their use due to the complications of some models and physiological reactions adverse reactions related to the elevation of metal ions in the blood. Our objective is to review the patients with M-M pair operated in our center, correlating the ion level with the position of the acetabular component and with the size of the head. MATERIAL AND METHODS: Retrospective review of 166 M-M hip prostheses operated between 2002 and 2011. Sixty five ruled out for different causes (death, loss of follow-up, no current ion control, no radiography or others), leaving a sample of 101 patients to be analyzed. Follow-up time, cup inclination angle, blood ion level, Harris Hip Score (HHS), and complications were recorded. RESULTS: One hundred and one patients (25 women and 76 men), 55years of average age (between 26 and 70), of these 8 were surface prostheses and 93 total prostheses. The mean follow-up time was 10years (between 5 and 17years). The mean head diameters was 46.25 (between 38 and 56). The mean inclination of the butts was 45.7° (between 26° and 71°). The correlation force between the verticality of the cup and the increase in ions is moderate r=0.31 for Cr and slight r=0.25 for Co. The correlation force between head size and ion increase is weak and inverse r=-0.14 for Cr and r=0.1 for Co. Five patients (4.9%) required revision (2 [1%] due to increased ions with pseudotumor). The mean time to revision was 6.5years in which the ions increased. The mean HHS was 94.01 (between 55.8 and 100). In the review of patients, we found 3 with a significant increase in ions who had not followed controls, all 3 had an HHS of 100. The angles of the acetabular components were 69°, 60° and 48° and the diameter of the head was 48.42 and 48mm, respectively. DISCUSSION AND CONCLUSIONS: M-M prostheses have been a valid option in patients with high functional demand. A bi-annual analytical follow-up is recommended, since in our case we have detected 3patients with HHS100 who presented unacceptable elevation of cobalt >20µm/L (according to SECCA) of the ions and 4 with very abnormal elevation of cobalt ≥10µm/L (according to SECCA), all of them with cup orientation angles >50°. With our review we can conclude that there is a moderate correlation between the verticality of the acetabular component and the increase in blood ions and that the follow-up of this patient with angles >50° is essential.

Lumbosacral Transitional Vertebrae Influence on Acetabular Orientation and Pelvic Tilt.

Lumbosacral transitional vertebrae (LSTV) are common congenital variances with a prevalence found in the population up to 35.6%. The literature demonstrates an influence of LSTV on bony pelvic anatomy. The influence on the anatomical acetabular orientation, which is important for cup positioning in total hip arthroplasty, has not yet been described for patients with LSTV. A total of 53 patients with LSTV were identified from a CT Database including 819 subjects. Fifty patients with LSTV could be included and were matched for age and sex against a control group. We examined the influence of LSTV, classified according to Castellvi, on acetabular orientation and pelvic tilt in the supine position. Functional acetabular anteversion and inclination, assessed against the table plane, were compared against anatomical acetabular anteversion and inclination, assessed against the anterior pelvic plane. The anatomical acetabular inclination correlated with the pelvic tilt (r = 0.363, p < 0.001). The anatomical acetabular inclination was significantly larger than the functional acetabular inclination in the supine position (p < 0.001). Castellvi grading of LSTV correlated negatively with pelvic tilt (ρ = −0.387, p = 0.006). Castellvi grading correlated significantly with functional acetabular anteversion (ρ = 0.324, p = 0.022) and anatomical acetabular anteversion (ρ = 0.306, p = 0.022). A higher Castellvi grading was accompanied by a reduced pelvic tilt in the supine position. The functional acetabular anteversion and anatomical acetabular anteversion increased in parallel to the higher Castellvi grading. Therefore, LSTV and Castellvi grading might be assessed on pre-operative X-rays prior to hip arthroplasty and surgeons might consider adjusting cup positioning accordingly.

Is there a correlation between pelvic incidence and orientation of the acetabulum? An analysis based on a three-dimensional statistical model of the pelvic ring.

The pelvic ring is a complex anatomical structure building up the connection between the trunk and the legs. Whilst there is a broad discussion in the literature about the dynamic interaction between spine, pelvis and the hip joints, there is still little information about the relation and interaction of the constant pelvic parameters. Based on a three-dimensional (3D) statistical model consisting of 150 uninjured and bony healthy pelves (100 Europeans, 50 Japanese; 81 males, 69 females; average age 74.3 years ± 17.5 years) an evaluation of pelvic incidence (PI) and acetabular orientation in anteversion and inclination was performed and potential correlations of these intraindividual constant parameters were investigated. Pelvic incidence is defined as the angle between the perpendicular to the sacral plate at its midpoint and the line connecting this point to the middle axis of the femoral heads. Acetabular anteversion is defined as the angle between the perpendicular to the best-fit plane on the acetabular rim and the coronal plane measured in strict lateral view. Acetabular inclination is defined as the angle between the perpendicular to the best-fit plane on the acetabular rim and the sagittal plane in strict frontal view. Data were further analysed with regard to different subgroup's age, sex and ethnicity. A positive correlation between PI and acetabular anteversion could be demonstrated. Further, PI and also the acetabular parameters anteversion and inclination were found to be significantly higher in the European individuals than in the Asian. The results of the present study demonstrate a relation between the anatomical configuration of the constant pelvic parameters building up the connection points to the next proximal respectively caudal skeleton section. The findings might lead to more comprehensive treatment strategies in case of trauma or degenerative pathologies of the pelvis in the future.

Acetabular and Femoral Component Positioning Using Direct Anterior Approach Versus Posterior Approach in Total Hip Arthroplasty.

PURPOSE: Direct anterior approach (DAA) has recently become popular in total hip arthroplasty (THA). However, irrespective of the surgical approach used, component malposition is an important factor affecting function and complications after THA. This study aims to compare component positioning on the femoral and acetabular side between DAA and posterior approach (PA) to the hip joint. We hypothesized that the two approaches are similar in terms of component positioning. METHODS: We prospectively studied 50 patients, matched according to age, sex, and body mass index, undergoing THA, divided non-randomly into 2 groups. Group 1 comprised 25 patients (35 hips) undergoing THA using DAA and group 2 comprised 25 patients (25 hips) undergoing THA using PA. Ten patients from group 1 had simultaneous bilateral THA. Radiological parameters studied were acetabular inclination (AI), coronal femoral stem alignment (CFA), leg length difference (LLD), acetabular cup version (AV), and femoral stem version (FV). RESULTS: There was no significant difference in AI, CFA, LLD, AV, and FV between the two groups. Excellent to good inter and intra-observer reliability expressed in terms of intraclass correlation coefficient (ICC) was noted for all the radiographic measurements. CONCLUSION: Both DAA and PA for THA achieve comparable radiological component positioning. DAA may not provide any advantage over PA in terms of positioning of the prosthesis. LEVEL OF EVIDENCE: Level II, non-randomized comparative study.

Predictive factors affecting long-term survivorship of ASR metal-on-metal total hip arthroplasty.

INTRODUCTION: We present the outcome of 154 ASR (Articular Surface Replacement) hips performed at the P.D Hinduja Hospital and Medical Research Centre in terms of revision rate, metal ion levels, and factors affecting survivorship. Further, determined the importance of serial metal ion estimation over single value with poorly functioning arthroplasties. METHODS: A retrospective study of 154 ASR arthroplasties (136 patients) performed from April 2005 till March 2010 was conducted. Ninety-seven patients were available for final analysis. All patients were assessed for symptoms, radiographs, blood metal (chromium and cobalt), metal artefact reduction sequence (MARS), magnetic resonance imaging (MRI), and computerized tomography (CT). RESULTS: Female gender, smaller femoral head, patients with a rising level of metal ion levels were more likely to have revision surgery. However, abnormal acetabular inclination/anteversion was not associated with the occurrence of raised metal ion levels, ARMD (adverse reaction to metal debris) or revision surgery. Patients with raised metal ion levels were more likely to have periprosthetic lucency, ARMD, and revision surgery. Median metal levels increased initially for the first three years. Still, patients who required revision surgery continued to have a metal ion rise until the point when revision surgery was performed. In contrast, patients who had a fall in metal ion levels did not require revision. CONCLUSION: A single metal ion value is less predictive of failing arthroplasties; instead, a rising trend of metal ion levels can better delineate arthroplasties which will require revision. ASR hips whose blood ion levels fell after an initial rise and showed a declining trend did well.

A comparative radiographic morphometric analysis to assess the normal radiological morphology of the adult hip in indian population.

OBJECTIVE: Our objective is to analyze the normal radiological morphologic parameters of the adult hip joint of the Indian population and compare it with standard measurements and with other populations to assess the variations. METHODS: A prospective analysis of the normal pelvis X-rays of 800 persons (1600 hips) was done. We have calculated the acetabular inclination, acetabular index, lateral center edge angle (LCEA) and neck-shaft angle (NSA), sphericity of the femoral head, congruity of the joint, version of the acetabulum, depth of acetabulum, and lateralization of the femoral head in normal X-rays of the pelvis in adult persons. We used RadiAnt DICOM viewer version 4.6.5.18450 (64bit) for measurement. Statistical analysis and mean values were calculated using SPSS software. RESULTS: There were 978 X-rays of the male hip and 622 female. The acetabular inclination varied from 1 to 9. The mean acetabular index was 26.5. The LCEA was between 20 and 50. The mean neck-shaft angle was 133. There were 35, hips with an aspherical head. 94.2% X-rays the hip joint was congruent. There was 2.9% of the retroversion of acetabulum, 3.3% lateralization. CONCLUSION: Most of the parameters were comparable to standard values the acetabular index was lower. LCEA and NSA were higher. The acetabular angle was lower. There were femoral head asphericity, joint incongruity, and lateralization of the femoral head in a small proportion of our general population.

Changes of acetabular anteversion according to pelvic tilt on sagittal plane under various acetabular inclinations.

Improper functional orientation of the acetabular cup can result in improper positions when dynamic pelvic positions are not considered. The purpose of this study was to evaluate changes on acetabular anteversion according to pelvic tilt under various acetabular inclinations. Two artificial pelvic models were selected for this study. Acetabular inclinations on the coronal plane were 25°, 32°, 50°, and 60°. Acetabular anteversion of all components were 15°. Changes of anteversion according to pelvic tilt were measured at angles of 0°, 10°, 20°, 30°, and 40°. Computer Navigation, PolyWare 3D pro, CT, and plain radiography were used to measure each angle. The anatomical anteversions against pelvic tilt were calculated using the following formulae: anatomical anteversion (°) = -14.48Χ + 90.18 (inclination angle 25°); anatomical anteversion (°) = -12.26Χ + 80.10 (inclination angle 32°); anatomical anteversion (°) = -7.468Χ + 61.13 (inclination angle 50°); and anatomical anteversion (°) = -5.328Χ + 44.84 (inclination angle 60°) (Χ: pelvic tilt angle). Radiographic anteversion against pelvic tilt were calculated using the following formulae: radiographic anteversion (°) = -9.50Χ + 57.09 (inclination angle 25°); radiographic anteversion (°) = -8.577Χ + 50.89 (inclination angle 32°); radiographic anteversion (°) = -6.794Χ + 45.73 (inclination angle 50°); radiographic anteversion (°) = -5.226Χ + 33.08 (inclination angle 60°). In conclusion, changes in anteversion according to pelvic tilt were lesser at higher degrees of acetabular inclination.

A device to make the pelvic sagittal plane horizontal and reduce error in cup inclination during total hip arthroplasty: a validation study.

INTRODUCTION: Radiological inclination (RI) is determined in part by operative inclination (OI), which is defined as the angle between the cup axis or handle and the sagittal plane. In lateral decubitus the theatre floor becomes a surrogate for the pelvic sagittal plane. Critically at the time of cup insertion if the pelvic sagittal plane is not parallel to the floor either because the upper hemi pelvis is internally rotated or adducted, RI can be much greater than expected. We have developed a simple Pelvic Orientation Device (POD) to help achieve a horizontal pelvic sagittal plane. METHODS: A model representing the posterior aspect of the pelvis was created. This permitted known movement in 2 planes to simulate internal rotation and adduction of the upper hemi pelvis, with 15 known pre-set positions. 20 participants tested the POD in 5 random, blinded position combinations, providing 200 readings. The accuracy was measured by subtracting each reading from the known value. RESULTS: Two statistical outliers were identified and removed from analysis. The mean adduction error was 0.73°. For internal rotation, the mean error was -0.03°. Accuracy within 2.0° was achieved in 176 of 190 (93%) of readings. The maximum error was 3.6° for internal rotation and 3.1° for adduction. CONCLUSION: In a model pelvis the POD provided an accurate and reproducible method of achieving a horizontal sagittal plane. Applied clinically, this simple tool has the potential to reduce the high values of RI sometimes seen following THA in lateral decubitus.

Can the use of an inclinometer improve the positioning of the acetabular component in total hip arthroplasty?

Aims: Accurate placement of the acetabular component is essential in total hip arthroplasty (THA). The purpose of this study was to determine if the ability to achieve inclination of the acetabular component within the 'safe-zone' of 30° to 50° could be improved with the use of an inclinometer. Patients and Methods: We reviewed 167 primary THAs performed by a single surgeon over a period of 14 months. Procedures were performed at two institutions: an inpatient hospital, where an inclinometer was used (inclinometer group); and an ambulatory centre, where an inclinometer was not used as it could not be adequately sterilized (control group). We excluded 47 patients with a body mass index (BMI) of > 40 kg/m2, age of > 68 years, or a surgical indication other than osteoarthritis whose treatment could not be undertaken in the ambulatory centre. There were thus 120 patients in the study, 68 in the inclinometer group and 52 in the control group. The inclination angles of the acetabular component were measured from de-identified plain radiographs by two blinded investigators who were not involved in the surgery. The effect of the use of the inclinometer on the inclination angle was determined using multivariate regression analysis. Results: The mean inclination angle for the THAs in the inclinometer group was 42.9° (95% confidence interval (CI) 41.7° to 44.0°; range 29.0° to 63.8°) and 46.5° (95% CI 45.2° to 47.7°; range 32.8° to 63.2°) in the control group (p < 0.001). Regression analysis identified a 9.1% difference in inclination due to the use of an inclinometer (p < 0.001), and THAs performed without the inclinometer were three times more likely to result in inclination angles of > 50° (odds ratio (OR) 2.8, p = 0.036). The correlation coefficient for the interobserver reliability of the measurement of the two investigators was 0.95 (95% CI 0.93 to 0.97). Conclusion: The use of a simple inclinometer resulted in a significant reduction in the number of outliers compared with a freehand technique. Cite this article: Bone Joint J 2018;100-B:862-6.

Femur first surgical technique: a smart non-computer-based procedure to achieve the combined anteversion in primary total hip arthroplasty.

BACKGROUND: The relevance of prosthetic component orientation to prevent dislocation and impingement following total hip arthroplasty (THA) has been widely accepted. We investigated the use of a non-computer-based surgery to address the reciprocal orientation of the acetabular and femoral components. METHODS: In the femur first technique, the cup is positioned relative to the stem. When the definitive antetorsion of femoral component is fixed, the cup is positioned in a compliant anteversion to the stem. Clinical and radiographic assessments were performed before and 3 months after THA. Radiographic assessment was performed in standing position with the EOS 2D/3D radiography system. 3D images were used to preoperative anterior pelvic plane (APP) angle, postoperative acetabular inclination (AI) and anteversion (AA), and postoperative stem antetorsion. Clinical assessment was performed with Harris Hip Score (HHS). RESULTS: Forty patients (40 hips) underwent primary THA with an average age of 61 years (range, 36-84). Average HHS increased from 43 ± 5 (range, 37-52) preoperatively to 97 ± 6 (range, 86-100) at the last follow-up (P < 0.0001). Average combined anteversion value of cup with liner and stem was 38° ± 9° (range, 12°-55°). Average AI value of cup with liner was 39° ± 6° (range, 30°-55°) in the group with standard stem and 45° ± 7° (range, 39°-58°) in the group with varized stem (P = 0.007). Relationship analysis showed no correlation between the combined anteversion values of the cup with liner and stem with APP angle values (r = 0.26, P = 0.87). CONCLUSIONS: Femur first technique allows the surgeon to achieve a combined anteversion ranging from 25° to 50° with a cup inclination ranging from 30° to 50°. The cup is positioned according to the functional plane of the patient regardless the preoperative pelvic tilt.

A Comparison of Radiographic Outcomes After Total Hip Arthroplasty Between the Posterior Approach and Direct Anterior Approach With Intraoperative Fluoroscopy.

BACKGROUND: Radiographic outcomes after total hip arthroplasty (THA) have been linked to clinical outcomes. The direct anterior approach (DAA) for THA has been criticized by some for providing limited exposure and compromised implant position but allows for routine use of intraoperative fluoroscopy. We sought to determine whether radiographic measurements differed by THA approach using prospective cohorts. METHODS: Two reviewers blinded to surgical approach examined 194 radiographs, obtained 4-6 weeks after primary THA, and obtained measurements for acetabular inclination angle, acetabular anteversion, radiographic limb length discrepancy (LLD), and femoral offset. All surgeries were performed at a tertiary academic medical center in rural New England by an experienced fellowship-trained arthroplasty surgeon. Measurements for inclination angle, anteversion, LLD, and offset were made into binary yes/no responses based on whether the mean measurement (between the 2 reviewers) was acceptable or not based on established criteria. Multivariate logistic regression analyses were performed using preoperative and intraoperative characteristics to identify predictors of acceptability for each measurement. RESULTS: The DAA group had higher rates of acceptable acetabular angle (96 vs 85%, P = .005) and was protective against an unacceptable angle in an adjusted predictive model (odds ratios 0.16, P = .005). There were no significant differences between approaches for acceptable anteversion, LLD, or offset. Body mass index of 30-34 was associated with higher odds of unacceptable inclination angle compared to the nonobese group (adjusted odds ratio, 6.82, P = .013). CONCLUSION: DAA for THA was associated with lower odds of unacceptable inclination angle compared to the posterior approach, with no differences in anteversion, LLD, or offset.

The effect of orientation of the acetabular component on outcome following total hip arthroplasty with small diameter hard-on-soft bearings.

We assessed the orientation of the acetabular component in 1070 primary total hip arthroplasties with hard-on-soft, small diameter bearings, aiming to determine the size and site of the target zone that optimises outcome. Outcome measures included complications, dislocations, revisions and ΔOHS (the difference between the Oxford Hip Scores pre-operatively and five years post-operatively). A wide scatter of orientation was observed (2sd 15°). Placing the component within Lewinnek's zone was not associated withimproved outcome. Of the different zone sizes tested (± 5°, ± 10° and ± 15°), only ± 15° was associated with a decreased rate of dislocation. The dislocation rate with acetabular components inside an inclination/anteversion zone of 40°/15° ± 15° was four times lower than those outside. The only zone size associated with statistically significant and clinically important improvement in OHS was ± 5°. The best outcomes (ΔOHS > 26) were achieved with a 45°/25° ± 5° zone. This study demonstrated that with traditional technology surgeons can only reliably achieve a target zone of ±15°. As the optimal zone to diminish the risk of dislocation is also ±15°, surgeons should be able to achieve this. This is the first study to demonstrate that optimal orientation of the acetabular component improves the functional outcome. However, the target zone is small (± 5°) and cannot, with current technology, be consistently achieved.

The effect of acetabular inclination on metal ion levels following metal-on-metal hip arthroplasty.

Acetabular inclination angles have been suggested as a principal determinant of circulating metal ion levels in metal-on-metal hip arthroplasties. We aimed to determine whether inclination angle correlates with ion levels in arthroplasties using the Articular Surface Replacement (ASR) system. Patients undergoing ASR arthroplasties had blood metal ion levels and radiograph analysis performed a mean of 3.2 years after surgery. Inclination angle showed only a weak correlation with cobalt (r=0.21) and chromium (r=0.15) levels. The correlation between inclination angle and cobalt levels was significant only with small femoral components, although it was still weak. Multiple regression showed a complex interaction of factors influencing ion levels but inclination angle accounted for little of this variation. We conclude that the acetabular inclination angle is not a meaningful determinant of metal ion levels in ASR arthroplasties.

Oversized cups as a major risk factor of postoperative pain after total hip arthroplasty.

After total hip arthroplasty (THA) some patients have persistent postoperative pain (POP). Some of these POP are anterior and are caused by an anterior iliopsoas impingement (AIPI). We have hypothesized that oversized implanted cups could be responsible for POP and especially AIPI. We screened 237 patients who had a primary THA and compared the size difference (ΔS) between the native femoral head and the implanted cup, in patients with and without POP. Median ΔS was 2 mm [-6; 11 mm] and patients with POP had a significantly increased ΔS (P < 0.0001). The threshold above which pain was significantly more frequent was ΔS ≥ 6 mm. Odds ratio was 14.4 for POP and 26 for AIPI pain when ΔS ≥ 6 mm.

Imageless computer-assisted versus conventional total hip arthroplasty: one surgeon's initial experience.

Computer-assisted surgery (CAS) systems are advocated to improve component positioning in THA, though potential operative risks and costs of CAS have fueled debate. The present study examines the radiographic outcomes, operative efficiency, cost, and midterm functional outcomes for patients who underwent THA, either with CAS or conventional instrumentation. Patient baseline characteristics were recorded for 126 lower-extremities in the CAS series, and 215 in the conventional series. There was no difference in Harris Hip Score or leg length discrepancy between series. Inclination angle, blood loss, and operating room times were increased for CAS. These results suggest that CAS confers no advantage over conventional methods regarding accuracy of THA component placement, drives unreimbursed increases in procedure costs, may expose patients to additional operative risk, and produces no functional benefit at midterm follow-up.

A safe zone for acetabular component position in metal-on-metal hip resurfacing arthroplasty: winner of the 2012 HAP PAUL award.

A safe zone for acetabular component positioning in hip resurfacing (RAIL: Relative Acetabular Inclination Limit) was calculated based on implant size and acetabular inclination angle (AIA). For AIA below the RAIL, there were no adverse wear failures or dislocations, and only 1% of cases with ion levels above 10 µg/L. Other than high inclination angle and small bearing size, female gender was the only other factor that correlated with high ion levels in the multivariate analysis. Seven hundred sixty-one hip resurfacing cases are included in this study. The UCLA activity score, femoral shaft angle, body mass index, weight, American Society of Anesthesiologists score, combined range of motion, diagnosis, age, gender, implant brand, AIA, bearing size, and duration of implantation were analyzed to determine the potential risk factors for elevated metal ion levels. These findings apply to sub hemispheric metal-on-metal bearings with similar coverage arcs as the Biomet and Corin hip resurfacing brands. Additional problems may occur when these bearings are connected with trunions on stems for total hip arthroplasty.