In Situ Characterization Techniques for Electrochemical Nitrogen Reduction Reaction.

The electrochemical reduction of nitrogen to produce ammonia is pivotal in modern society due to its environmental friendliness and the substantial influence that ammonia has on food, chemicals, and energy. However, the current electrochemical nitrogen reduction reaction (NRR) mechanism is still imperfect, which seriously impedes the development of NRR. In situ characterization techniques offer insight into the alterations taking place at the electrode/electrolyte interface throughout the NRR process, thereby helping us to explore the NRR mechanism in-depth and ultimately promote the development of efficient catalytic systems for NRR. Herein, we introduce the popular theories and mechanisms of the electrochemical NRR and provide an extensive overview on the application of various in situ characterization approaches for on-site detection of reaction intermediates and catalyst transformations during electrocatalytic NRR processes, including different optical techniques, X-ray-based techniques, electron microscopy, and scanning probe microscopy. Finally, some major challenges and future directions of these in situ techniques are proposed.

Architectural Decoration of Bioleached NiFeP Surfaces by Co3O4 Flowers for Efficient Electrocatalytic Hydrogen Generation.

In the quest for sustainable hydrogen production via water electrolysis, the development of high-performance, noble-metal-free catalytic systems is highly desired. Herein, we proposed an innovative strategy for the development of an electrocatalyst by refining the surface characteristics of a NiFeP alloy through microbiological techniques and subsequent enrichment of active sites by tailoring 3D hierarchical flower-like structures with intact and interconnected two-dimensional (2D) Co3O4. The resultant 3D Co3O4@NiFeP-5/24h has a porous structure comprised of intercrossed nanoparticles covering the entirety of the catalytic surface. This design ensures comprehensive electrolyte ion penetration and facilitates the release of gas bubbles while reducing bubble adhesion rates. Remarkably, the Co3O4@NiFeP-5/24h electrode demonstrates superior hydrogen evolution (HER) performance in an alkaline medium, characterized by its high stability, low overpotential (106 mV at a current density of 10 mA cm-2), and reduced Tafel slope (98 mV dec-1). Besides, the minimized interfacial contact resistance among the phases of electrode and electrolyte emphasizes the high HER performance of the 3D Co3O4@NiFeP-5/24h electrode. The innovative design and fabrication strategy employed herein holds significant potential for advancing the field of water-splitting electrocatalysis, offering a promising path toward the rational design and development of noble-metal-free electrocatalysts.

Photothermal Synergistic Effect Induces Bimetallic Cooperation to Modulate Product Selectivity of CO2 Reduction on Different CeO2 Crystal Facets.

Product selectivity of solar-driven CO2 reduction and H2O oxidation reactions has been successfully controlled by tuning the spatial distance between Pt/Au bimetallic active sites on different crystal facets of CeO2 catalysts. The replacement depth of Ce atoms by monatomic Pt determines the distance between bimetallic sites, while Au clusters are deposited on the surface. This space configuration creates a favourable microenvironment for the migration of active hydrogen species (*H). The *H is generated via the activation of H2O on monatomic Pt sites and migrate towards Au clusters with a strong capacity for CO2 adsorption. Under concentrated solar irradiation, selectivity of the (100) facet towards CO is 100%, and the selectivity of the (110) and (111) facets towards CH4 is 33.5% and 97.6%, respectively. Notably, the CH4 yield on the (111) facet is as high as 369.4 µmol/g/h, and the solar-to-chemical energy efficiency of 0.23% is 33.8 times higher than that under non-concentrated solar irradiation. The impacts of high-density flux photon and thermal effects on carriers and *H migration at the microscale are comprehensively discussed. This study provides a new avenue for tuning the spatial distance between active sites to achieve optimal product selectivity.

FeCu bimetallic clusters for efficient urea production via coupling reduction of carbon dioxide and nitrate.

Urea electrosynthesis has appeared to meet the nitrogen cycle and carbon neutrality with energy-saving features. Copper can co-electrocatalyze among CO2 and nitrogen species to generate urea, however developing effective electrocatalysts is still an obstacle. Here, we developed a nitrogen-doped porous carbon loaded with FeCu clusters that convert CO2 and NO3- into urea, with the highest Faradaic efficiency of 39.8 % and yield rate of 1024.6 µg h-1 mgcat.-1, under optimized ambient conditions, exceeding that at the Fe or Cu homogeneous sites. Furthermore, a favorable CN coupling pathway originates from *NHCO and *NHCONO two intermediates with lower free energy barriers on FeCu dual active sites are verified through in-situ Fourier transform infrared spectroscopy and theoretical calculations. This research might provide deep insights into coupling mechanisms and investigation of efficient catalysts for green urea production.

Constructing Orbital Coupling-Modulated Homogeneous Dual-Atom Fe-Fe Sites for Boosting Bidirectional Conversion of Polysulfides.

Homogeneous dual-atom catalysts (HDACs) have garnered significant attention for their potential to overcome the shuttling effect and sluggish reaction kinetics in lithium-sulfur (Li-S) batteries. However, modulating the electron structure of metal atomic orbitals for HDACs to dictate the catalytic activity toward polysulfides has remained meaningful but unexplored so far. Herein, an interfacial cladding strategy is developed to obtain a new type of dual-atom iron matrix with a unique FeN2P1-FeN2P1 coordination structure (Fe2@NCP). The 3d orbital electrons of the Fe centers are redistributed by incorporating phosphorus atoms into the first coordination sphere. The theoretical calculations disclose that the strong coupling between the Fe d orbital and the S p orbital exhibits an enhanced Fe-S bond and improved reactivity toward polysulfides. Moreover, the Fe2@NCP catalyst achieves robust adsorption ability toward Li2Sn (1 ≤ n ≤ 8) and significantly boosts bidirectional sulfur redox reaction kinetics by lowering the Li2S deposition/decomposition energy barriers. Consequently, the assembled Li-S batteries present a high retention ratio of 77.3% after 500 cycles at 1C. Furthermore, the Li-S pouch cell also exhibits good performance at 0.1C (80.2% retention over 100 cycles) for practical application with a sulfur loading of 4.0 mg/cm2. The outcome of this study will facilitate the design of homogeneous dual-atom catalysts for Li-S batteries.

Insights into the Understanding of the Nickel-Based Pre-Catalyst Effect on Urea Oxidation Reaction Activity.

Nickel-based catalysts are regarded as the most excellent urea oxidation reaction (UOR) catalysts in alkaline media. Whatever kind of nickel-based catalysts is utilized to catalyze UOR, it is widely believed that the in situ-formed Ni3+ moieties are the true active sites and the as-utilized nickel-based catalysts just serve as pre-catalysts. Digging the pre-catalyst effect on the activity of Ni3+ moieties helps to better design nickel-based catalysts. Herein, five different anions of OH-, CO32-, SiO32-, MoO42-, and WO42- were used to bond with Ni2+ to fabricate the pre-catalysts ß-Ni(OH)2, Ni-CO3, Ni-SiO3, Ni-MoO4, and Ni-WO4. It is found that the true active sites of the five as-fabricated catalysts are the same in situ-formed Ni3+ moieties and the five as-fabricated catalysts demonstrate different UOR activity. Although the as-synthesized five catalysts just serve as the pre-catalysts, they determine the quantity of active sites and activity per active site, thus determining the catalytic activity of the catalysts. Among the five catalysts, the amorphous nickel tungstate exhibits the most superior activity per active site and can catalyze UOR to reach 158.10 mA·cm-2 at 1.6 V, exceeding the majority of catalysts. This work makes for a deeper understanding of the pre-catalyst effect on UOR activity and helps to better design nickel-based UOR catalysts.

Facilitating the Hydrogen Evolution Reaction on Basal-Plane S Sites on MoS2@Ni3S2 by Dual Ti and N Plasma Treatment.

Atomic engineering of the basal plane active sites in MoS2 holds great promise to boost the electrocatalytic activity for hydrogen evolution reactions (HER), yet the performance optimization and mechanism exploration are still not satisfactory. Herein, we proposed a dual-plasma engineering strategy to implant Ti and N heteroatoms into the basal plane of MoS2 supported by Ni3S2 nanorods on nickel foam (MSNF) for efficient electrocatalysis of HER. Owing to the low formation energy of Ti dopants in MoS2 and the extra charge carriers introduced by N dopants, the optimally codoped samples N1.0@Ti500-MSNF demonstrate significant morphology changes from nanorods to urchin-like nanospheres with the surface active areas increased by seven-fold, as well as enhanced electrical conductivity in comparison with the nondoped counterparts. The HER performance of N1.0@Ti500-MSNF is comparable with the Pt-based catalyst: overpotential of 26 mV at 20 mA cm-2, Tafel slope of 35.6 mV dec-1, and long-term stability over 50 h. First-principles calculation reveals that N doping accelerates the dissociation of water molecules while Ti doping activates the adjacent S sites for hydrogen adsorption by lowering the Gibbs free energy, resulting in excellent HER activity. This work thus provides an effective strategy for basal plane engineering of MoS2 heterostructures toward high-performance HER and sustainable energy supply at reasonable costs.

Highly Efficient Electrosynthesis of Urea from CO2 and Nitrate by a Metal-Organic Framework with Dual Active Sites.

Electrosynthesis of urea from CO2 and NO3- is a sustainable alternative to energy-intensive industrial processes. The challenge hindering the progress is the development of advanced electrocatalysts that yield urea with both high Faradaic efficiency (FE) and current density. In this work, we designed a new two-dimensional MOF, namely PcNi-Fe-O, constructed by nickel-phthalocyanine (NiPc) ligands and square-planar FeO4 nodes. PcNi-Fe-O exhibits remarkable performance to yield urea at a high current density of 10.1 mA cm-2 with a high FE(urea) of 54.1% in a neutral aqueous solution, surpassing those of most reported electrocatalysts. No obvious performance degradation was observed over 20 hours of continuous operation at the current density of 10.1 mA cm-2. By expanding the electrode area to 25 cm2 and operating for 8 hours, we obtained 0.164 g of high-purity urea, underscoring its potential for industrial applications. Mechanism study unveiled the enhanced performance might be ascribed to the synergistic interaction between NiPc and FeO4 sites. Specifically, NH3 produced at the FeO4 site can efficiently migrate and couple with the *NHCOOH intermediate adsorbed on the urea-producing site (NiPc). This synergistic effect results in a lower energy barrier for C-N bond formation than those of the reported catalysts with single active sites.

Photoredox coupling of carbon dioxide reduction with tetracycline oxidation using excited-state bismuth and cobalt dual sites over cobalt-tailored bismuth oxychloride.

Photocatalytic carbon dioxide (CO2) conversion and simultaneous pollutant oxidation in a single system are promising approaches to mitigate energy and environmental challenges. However, the limited availability of active photocatalyst sites led to slow reaction kinetics and poor selectivity. Current research has predominantly focused on ground-state reactive sites of semiconductors, with less emphasis on active sites in their excited states. Therefore, gaining insights into the active sites in the excited state of semiconductors could provide a significant breakthrough in understanding the photocatalytic reaction mechanism. In this study, cobalt-doped bismuth oxychloride nanosheets containing abundant oxygen vacancies (OVs) were used as a model to investigate the active sites in excited states. These nanosheets were used to integrate CO2 reduction with tetracycline (TC) oxidation. Combining theoretical calculations with in situ characterizations revealed that under excited-state conditions photogenerated electrons transfer from cobalt (Co) dopants to OVs and subsequently to bismuth (Bi) atoms, forming Bi(3-x)+ sites enriched with excited electrons. These excited-electron-rich Bi(3-x)+ sites and electron-deficient Co sites contribute to CO2 reduction and TC oxidation, respectively. This study provides a comprehensive understanding of active sites in the excited state in doped semiconductors at the atomic level, reinforcing their potential for synergistic CO2 reduction and pollutant degradation.

A Dual-Active Covalent Triazine Framework Film for Efficient Visible-Light-Driven Hydrogen Peroxide Production.

Photocatalytic hydrogen peroxide production from water and oxygen offers a clean and sustainable alternative to the conventional energy-intensive anthraquinone oxidation method. Compared to powdered covalent triazine frameworks (CTFs), the film morphology of CTFs provides better connectivity in 2D, yielding several advantages: more efficient connections between active sites, reduced electron-hole pair recombination, increased resistance to superoxide radical induced corrosion, and decreased light scattering. Leveraging these benefits, it has incorporated dual active sites for both the oxygen reduction reaction (ORR) and the water oxidation reaction (WOR) into a CTF film system. This dual-active CTF film demonstrated an exceptional hydrogen peroxide production rate of 19 460 µmol h⁻¹ m⁻2 after 1 h and 17 830 µmol h⁻¹ m⁻2 after 5 h under visible light irradiation (≥420 nm) without the need for sacrificial agents.

High catalytic activity and abundant active sites in M2C12 monolayer for nitrogen reduction reaction.

Developing highly efficient single-atom catalysts (SACs) for the nitrogen reduction reaction (NRR) to ammonia production has garnered significant attention in the scientific community. However, achieving high activity and selectivity remains challenging due to the lack of innate activity in most existing catalysts or insufficient active site density. This study delves into the potential of M2C12 materials (M = Cr, Ir, Mn, Mo, Os, Re, Rh, Ru, W, Fe, Cu, and Ti) with high transition metal coverage as SACs for NRR using first-principles calculations. Among these materials, Os2C12 exhibited superior catalytic activity for NRR, with a low overpotential of 0.39 V and an Os coverage of up to 72.53 wt%. To further boost its catalytic activity, a nonmetal (NM) atom doping (NM = B, N, O, and S) and C vacancy modification were explored in Os2C12. It is found that the introduction of O enables exceptional catalytic activity, selectivity, and stability, with an even lower overpotential of 0.07 V. Incorporating the O atom disrupted the charge balance of its coordinating C atoms, effectively increasing the positive charge density of the Os-d-orbit-related electronic structure. This promoted strong d-π* coupling between Os and N2H, enhancing N2H adsorption and facilitating NRR processes. This comprehensive study provides valuable insights into NRR catalyst design for sustainable ammonia production and offers a reference for exploring alternative materials in other catalytic reactions.

Gas-Phase Regeneration of Metal-Poisoned V2O5-WO3/TiO2 NH3-SCR Catalysts via a Masking and Reconstruction Strategy.

Renewing metal-poisoned NH3-SCR catalysts holds great potential for mitigating environmental pollution and utilizing hazardous wastes simultaneously. Ionic compounds containing heavy metals often exhibit limited solubility due to their high polarizability, making traditional washing techniques ineffective in removing heavy metal poisons. This study presents a gas-based method for regenerating heavy-metal-poisoned V2O5-WO3/TiO2 catalysts employed in NH3-SCR techniques. The regeneration is achieved by employing a masking and reconstruction strategy, which involves the in situ formation of NO2 to mediate the production of SO3. This enables the effective bonding of Pb and triggers the reconstruction of active VOx sites. In situ spectroscopy confirms that the sulfation of PbO restores acidity, while the occupied effect resulting from the sulfation of TiO2 promotes the formation of more polymeric VOx species. Consequently, the regenerated catalyst exhibits enhanced activity and superior resistance to metal poisons compared with the fresh catalyst. The innovative method offers a promising solution for extending the lifespan of poisoned catalysts, reducing waste generation, and enhancing the efficiency of NH3-SCR systems.

Efficient Self-cleaning and antibacterial ceramics with active sites fully exposed obtained from rare earth waste.

The utilization of rare earth polishing powder waste (RPW) to prepare antibacterial ceramics can effectively avoid problems of pollution in the recycling process and waste of rare earth resources. Herein, a novel RPW-based antibacterial ceramics was developed, which possesses the core-shell structure with ceramics as the cores and the CeO2/BiOCl as the superficial coating. The antibacterial ceramics display notable antibacterial activity, and the inactivation rates of 3.3 log under visible light irradiation in 30 min and 2.4 log under darkness in 1 h were achieved, and the zone of inhibition values was found to be 16.6 mm for E.coil. The hardness of antibacterial ceramics was measured to be 897 (±38) HV, higher than commercial porcelain's hardness (600 HV). The antibacterial mechanism was verified by the Ce ion release, reactive species, and fluorescence-based live/dead cells. This study presents a novel antibacterial ceramic structure and green economic reuse method of rare earth waste.

Fully sp2 Carbon-conjugated Covalent Organic Frameworks with Multiple Active Sites for Advanced Lithium-ion Battery Cathodes.

Covalent organic frameworks (COFs) hold great promise for rechargeable batteries. However, the synthesis of COFs with abundant active sites, excellent stability, and increased conductivity remains a challenge. Here, chemically stable fully sp2 carbon-conjugated COFs (sp2c-COFs) with multiple active sites are designed by the polymerization of benzo[1,2-b:3,4-b':5,6-b'']trithiophene-2,5,8-tricarbaldehyde) (BTT) and s-indacene-1,3,5,7(2H,6H)-tetrone (ICTO) (denoted as BTT-ICTO). The morphology and structure of the COF are precisely regulated from "butterfly-shaped" to "cable-like" through an in-situ controllable growth strategy, significantly promoting the exposure and utilization of active sites. When the unique "cable-like" BTT-ICTO@CNT is employed as lithium-ion batteries (LIBs) cathode, it exhibits exceptional capacity (396 mAh g-1 at 0.1 A g-1 with 97.9% active sites utilization rate), superb rate capacity (227 mAh g-1 at 5.0 A g-1), and excellent cycling performance (184 mAh g-1 over 8000 cycles at 2.0 A g-1 with 0.00365% decay rate per cycle). The lithium storage mechanism of BTT-ICTO is exhaustively revealed by in-situ Fourier transform infrared, in-situ Raman, and density functional theory calculations. This work provides in-depth insights into fully sp2c-COFs with multiple active sites for high-performance LIBs.

Promoting Li2S Nucleation/Dissolution Kinetics via Multiple Active Sites over TiVCrMoC3Tx Interface.

Lithium-sulfur batteries (LSBs) are still limited by some issues such as polysulfides shuttle and lithium dendrites. Recently, the concept "high-entropy" has been considered as the research hotspot and international frontier. Herein, a high entropy MXene (TiVCrMoC3Tx, HE-MXene) doped graphene is designed as the modified coating on commercial separators for LSBs. The HE-MXene affords multiple metal active sites, fast Li+ diffusion rate, and efficient adsorption toward polysulfide intermediates. Furthermore, strong lithophilic property is favorable for uniform Li+ deposition. The combination of in situ characterizations confirms TiVCrMoC3Tx effectively promotes the Li2S nucleation/dissolution kinetics, reduces the Li+ diffusion barrier, and exhibits favorable lithium uniform deposition behavior. This TiVCrMoC3Tx/G@PP provides a high-capacity retention rate after 1000 cycles at 1 C and 2 C, with a capacity decay rate of merely 0.021% and 0.022% per cycle. Surprisingly, the cell operates at a low potential of 48 mV while maintaining at 5 mA cm-2/5 mAh cm-2 for 4000 h. Furthermore, it still maintains a high-capacity retention rate under a high sulfur loading of 4.8/6.4 mg cm-2 and a low E/S ratio of 8.6/7.5 µg mL-1. This work reveals a technical roadmap for simultaneously addressing the cathode and anode challenge, thus achieving potential commercially viable LSBs.

Selective catalytic oxidation of DMF over Cu-Ce/H-MOR by modulating the surface active sites.

Selective catalytic oxidation of the hazardous DMF exhaust gas presents a significant challenge in balancing oxidation activity and products selectivity (CO, NOx, N2, etc.). It is found that Cu/H-MOR demonstrates superior performance for DMF oxidation compared to CuO on other supports (γ-Al2O3, HY, ZSM-5) in terms of product selectivity and stability. The geometric and electronic structures of CuO active sites in Cu/H-MOR have been regulated by CeO2 promoter, leading to an increase in the ratio of active CuO (highly dispersed CuO and Cu+ specie). As a result, the oxidation activity and stability of the Cu/H-MOR catalyst were enhanced for DMF selective catalytic oxidation. However, excessive CuO or CeO2 content led to decreased N2 selectivity due to over-high oxidation activity. It is also revealed that Ce3+ species, active CuO species, and surface acid sites play a critical role in internal selective catalytic reduction reaction during DMF oxidation. The 10Cu-Ce/H-MOR (1/4) catalyst exhibited both high oxidation activity and internal selective catalytic reduction activity due to its abundance of active CuO specie as well as Ce3+ species and surface acid sites. Consequently, the 10Cu-Ce/H-MOR (1/4) catalyst demonstrated the widest temperature window for DMF oxidation with high N2 selectivity. These findings emphasize the importance of surface active sites modification for DMF selective catalytic oxidation.

Challenges and Opportunities for Single-Atom Electrocatalysts: From Lab-Scale Research to Potential Industry-Level Applications.

Single-atom electrocatalysts (SACs) are a class of promising materials for driving electrochemical energy conversion reactions due to their intrinsic advantages, including maximum metal utilization, well-defined active structures, and strong interface effects. However, SACs have not reached full commercialization for broad industrial applications. This review summarizes recent research achievements in the design of SACs for crucial electrocatalytic reactions on their active sites, coordination, and substrates, as well as the synthesis methods. The key challenges facing SACs in activity, selectivity, stability, and scalability, are highlighted. Furthermore, it is pointed out the new strategies to address these challenges including increasing intrinsic activity of metal sites, enhancing the utilization of metal sites, improving the stability, optimizing the local environment, developing new fabrication techniques, leveraging insights from theoretical studies, and expanding potential applications. Finally, the views are offered on the future direction of single-atom electrocatalysis toward commercialization.

In situ fabrication of atomically adjacent dual-vacancy sites for nearly 100% selective CH4 production.

The photocatalytic CO2-to-CH4 conversion involves multiple consecutive proton-electron coupling transfer processes. Achieving high CH4 selectivity with satisfactory conversion efficiency remains challenging since the inefficient proton and electron delivery path results in sluggish proton-electron transfer kinetics. Herein, we propose the fabrication of atomically adjacent anion-cation vacancy as paired redox active sites that could maximally promote the proton- and electron-donating efficiency to simultaneously enhance the oxidation and reduction half-reactions, achieving higher photocatalytic CO2 reduction activity and CH4 selectivity. Taking TiO2 as a photocatalyst prototype, the operando electron paramagnetic resonance spectra, quasi in situ X-ray photoelectron spectroscopy measurements, and high-angle annular dark-field-scanning transmission electron microscopy image analysis prove that the VTi on TiO2 as initial sites can induce electron redistribution and facilitate the escape of the adjacent oxygen atom, thereby triggering the dynamic creation of atomically adjacent dual-vacancy sites during photocatalytic reactions. The dual-vacancy sites not only promote the proton- and electron-donating efficiency for CO2 activation and protonation but also modulate the coordination modes of surface-bound intermediate species, thus converting the endoergic protonation step to an exoergic reaction process and steering the CO2 reduction pathway toward CH4 production. As a result, these in situ created dual active sites enable nearly 100% CH4 selectivity and evolution rate of 19.4 µmol g-1 h-1, about 80 times higher than that of pristine TiO2. Thus, these insights into vacancy dynamics and structure-function relationship are valuable to atomic understanding and catalyst design for achieving highly selective catalysis.

Constructing Pd@Layered-CoOx/MFI Bifunctional Catalyst for Efficient Ethyl Acetate Oxidation: Boosted C═O Activation and *O Species Transformation.

Oxygenated volatile organic compounds (OVOCs), emitted in large quantities by the chemical industry, are a major contributor to the formation of ozone and subsequent particulate matter. For the efficient catalytic oxidation of OVOCs, the challenges of molecular activation and intermediate inhibition remain. The construction of bifunctional active sites with specific structures offers a promising way to overcome these problems. Here, the Pd@Layered-CoOx/MFI bifunctional catalyst with core-shell active sites was rationally fabricated though a two-step ligand pyrolysis method, which exhibits a superb oxidation efficiency toward ethyl acetate (EA). Over this, 13.4% of EA (1000 ppm) can be oxidized at just 140 °C with a reaction rate of 13.85 mmol·gPd-1·s-1, around 176.7 times higher than that of the conventional Pd-CoOx/MFI catalyst. The electronic coupling of the Pd-Co pair promotes the electron back-donation from Pd nanoparticles to the layered CoOx shell and facilitates the formation of Pd2+ species, which greatly enhances the adsorption and activation of the electron-rich C═O bond of the EA molecules. In addition, the synergy of these core-shell Pd@Layered-CoOx sites accelerates the activation and transformation of *O species, which inhibit the formation of acetaldehyde and ethanol byproducts, ensuring the rapid total oxidation of EA molecules via the Mars-van Krevelen mechanism. This work established a solid foundation for exploring robust bifunctional catalysts for deep OVOC purification.

Electrocatalytic Oxidation of Benzaldehyde on Gold Nanoparticles Supported on Titanium Dioxide.

The electrooxidation of organic compounds offers a promising strategy for producing value-added chemicals through environmentally sustainable processes. A key challenge in this field is the development of electrocatalysts that are both effective and durable. In this study, we grow gold nanoparticles (Au NPs) on the surface of various phases of titanium dioxide (TiO2) as highly effective electrooxidation catalysts. Subsequently, the samples are tested for the oxidation of benzaldehyde (BZH) to benzoic acid (BZA) coupled with a hydrogen evolution reaction (HER). We observe the support containing a combination of rutile and anatase phases to provide the highest activity. The excellent electrooxidation performance of this Au-TiO2 sample is correlated with its mixed-phase composition, large surface area, high oxygen vacancy content, and the presence of Lewis acid active sites on its surface. This catalyst demonstrates an overpotential of 0.467 V at 10 mA cm-2 in a 1 M KOH solution containing 20 mM BZH, and 0.387 V in 100 mM BZH, well below the oxygen evolution reaction (OER) overpotential. The electrooxidation of BZH not only serves as OER alternative in applications such as electrochemical hydrogen evolution, enhancing energy efficiency, but simultaneously allows for the generation of high-value byproducts such as BZA.