Priority sources identification and risks assessment of heavy metal(loid)s in agricultural soils of a typical antimony mining watershed.

Heavy metal(loid) (HM) pollution in agricultural soils has become an environmental concern in antimony (Sb) mining areas. However, priority pollution sources identification and deep understanding of environmental risks of HMs face great challenges due to multiple and complex pollution sources coexist. Herein, an integrated approach was conducted to distinguish pollution sources and assess human health risk (HHR) and ecological risk (ER) in a typical Sb mining watershed in Southern China. This approach combines absolute principal component score-multiple linear regression (APCS-MLR) and positive matrix factorization (PMF) models with ER and HHR assessments. Four pollution sources were distinguished for both models, and APCS-MLR model was more accurate and plausible. Predominant HM concentration source was natural source (39.1%), followed by industrial and agricultural activities (23.0%), unknown sources (21.5%) and Sb mining and smelting activities (16.4%). Although natural source contributed the most to HM concentrations, it did not pose a significant ER. Industrial and agricultural activities predominantly contributed to ER, and attention should be paid to Cd and Sb. Sb mining and smelting activities were primary anthropogenic sources of HHR, particularly Sb and As contaminations. Considering ER and HHR assessments, Sb mining and smelting, and industrial and agricultural activities are critical sources, causing serious ecological and health threats. This study showed the advantages of multiple receptor model application in obtaining reliable source identification and providing better source-oriented risk assessments. HM pollution management, such as regulating mining and smelting and implementing soil remediation in polluted agricultural soils, is strongly recommended for protecting ecosystems and humans.

Sensitive and isotopic interference-free analysis of Sb using hydride generation-microwave plasma torch-mass spectrometry under ambient condition.

A sensitive and isotopic interference-free analysis method for Sb was developed based on hydride generation-microwave plasma torch-mass spectrometry (HG-MPT-MS). Compared to the conventional ICP-MS, MPT coupled to an ion trap mass spectrometer enabled much "softer" ionization of Sb under ambient condition, which provided multi-detection modes and various ion forms, such as Sb+, SbO+, SbO2-, SbO++H2O and so on. These ion formations can be easily regulated by tuning capillary voltage and tube lens voltage, which facilitated elimination of isotopic interference during analysis, for instance the interference of 123Te on 123Sb could be effectively excluded by optimizing parameters of capillary voltage and tube lens voltage. The potential application of HG-MPT-MS for Sb isotope ratio analysis was also demonstrated, which could be determined in different forms, e.g., 123Sb/121Sb or 123Sb16O/121Sb16O. The value of 123Sb/121Sb was determined to be 0.75110 ± 0.00038 (2σ, n > 50). In addition, the detection limit, linearity and spike recovery were also studied. Overall, HG-MPT-MS performed equally well on detection limit (0.05 µg/L) with ICP-MS or HG-AFS. The linearity (R2 = 0.998) was checked in the concentration range of 10-500 µg/L. Spike recovery were evaluated with two soil samples, and the obtained spike recovery ranged 90-100 %. In general, HG-MPT-MS was expected to be a versatile tool for study the biochemical or geochemical behaviors of Sb and other hydride forming elements under ambient condition in a much simpler and more efficient way.

Metal distribution in three organs and edibility assessment on Coptodon rendalli from the Umgeni River impacted by metallurgic industrial activities.

Fish is among the most affordable and readily available protein sources for communities residing near water bodies. However, the recent pollution status of aquatic ecosystems has rendered fish consumption risky for human health. The study evaluated metal levels in the liver, gill, and muscle tissues of Redbreast tilapia (Coptodon rendalli) from Inanda and Nagle dams in the uMgeni River system. Metals, Al, Sb, Cd, Cr, Fe, Mn, Mo, Pb, and Zn were analysed using ICP-OES. Fish size showed no significant difference between the two dams (p > 0.05) whereas a descending trend liver > gill > muscle was observed for most metal levels at both dams. Moreover, there was a clear separation for metal levels in the liver, gill, and muscle between the two dams (p < 0.001) and a similar trend was observed for organs in each dam (p < 0.001). No relationship was observed between fish length and metal levels and no definite trend was observed for inter-metal relationships. Antimony, Cr, and Pb showed THQs greater than 1 at both dams which suggests health risks for consumers. Molybdenum has also shown a concerning THQs with some individuals exhibiting values ranging from 0.5 - 0.9. These findings suggest that consuming C. rendalli from the Inanda and Nagle dams could result in adverse health effects from Sb, Cr and Pb.

Toxicity and related molecular mechanisms of Sb(III) in the embryos and larvae of zebrafish (Danio rerio).

Antimony (Sb) pollution poses a severe threat to humans and ecosystems due to the extensive use of Sb in various fields. However, little is known about the toxic effects of Sb and its aquatic ecotoxicological mechanism. This study aimed to reveal the toxicity and related molecular mechanisms of trivalent Sb (Sb(III)) in zebrafish embryos/larvae. Sb(III) accumulated in larvae, which correlated with the exposure concentration. Although no significant lethal or teratogenic effects were observed, normal growth and development were affected. Exposure to 10 or 20 mg/L Sb(III) increased the levels of reactive oxygen species in the larvae while enhancing catalase activity and increasing cell apoptosis. Transcriptomic analysis revealed that Sb(III) promoted glutathione metabolism and the ferroptosis pathway. In addition, symptoms associated with ferroptosis, including mitochondrial damage, biochemical levels of related molecules and increased tissue iron content, were detected. Quantitative polymerase chain reaction (qPCR) analyses further confirmed that Sb(III) significantly altered the transcription levels of genes related to the ferroptosis pathway by disrupting iron homeostasis. Furthermore, ferrostatin-1 (Fer-1) mitigated the toxic effects induced by Sb(III) in zebrafish. Our research fills the gap in the literature on the toxicity and mechanism of Sb(III) in aquatic organisms, which is highly important for understanding the ecological risks associated with Sb.

Cellulose nanocrystal-infused polymer hydrogel imbued with ferric-manganese oxide nanoparticles for efficient antinomy removal.

Antimony is a highly poisonous pollutant that needs to be removed from water to ensured safety. In this work, we have fabricated a novel adsorbent, the ferric-manganese oxide (FeMnOx) nanoparticles embedded cellulose nanocrystal-based polymer hydrogel (FeMnOx @CNC-g-PAA/qP4VP, denoted as FMO@CPqP), specifically engineered for the remediation of antimony-laden water. Comprehensive evaluations have been conducted to investigate the efficacy of the FMO@CPqP hydrogel in removal of antimony from water. The hydrogel exhibits superior affinity for antimony, with maximum adsorption capacities of 276.1 mg/g for Sb(III) and 286.8 mg/g for Sb(V). The adsorptive dynamics, governed by the kinetics and isotherm analyses, elucidate that the immobilization of both Sb(III) and Sb(V) is facilitated through a homogeneous and monolayer chemisorption mechanism. The hydrogel has a three-dimensional interconnected porous structure and exhibits good swelling behavior, which facilitates the rapid absorption of antimony ions by this high surface area hydrogel into the channels. Furthermore, various effects, including the oxidation and inner-sphere coordination mediated by FeMnOx NPs and the electrostatic attractions of the quaternized P4VP chains, promote the immobilization of antimony species. Owing to its high removal efficiency, stability and reusability, the FMO@CPqP hydrogel emerges as an exemplary candidate for the removal of antimony contaminants in water treatment processes.

3D Confinement Stabilizes the Metastable Amorphous State of Antimony Nanoparticles - A New Material for Miniaturized Phase Change Memories?

The wet-chemical synthesis of 3D confined antimony nanoparticles (Sb-NP) at low and high temperatures is described. Using reaction conditions that are mild in temperature and strong in reducing power allows the synthesis of amorphous Sb-NP stabilized with organic ligands. Exchanging the organic ligand 1-octanethiol by iodide enabled to investigate the unusual strong stability of this metastable material through simultaneous thermal analysis combining differential scanning calorimetry and thermogravimetric analysis. Additionally, in situ high temperature powder x-ray diffraction (p-XRD) shows a significant increase in stabilization of the amorphous phase in comparison to thin layered, 1D confined Sb or bulk material. Further, it is shown with scattering-type scanning near-field optical microscopy (s-SNOM) experiments that the optical response of the different phases in Sb-NP make the distinctness of each phase possible. It is proposed that the Sb-NP introduced here can serve as a 3D-confined optically addressable nanomaterial of miniaturized phase change memory devices.

Stabilized Hf-doped Ti/Sb-SnO2 electrode for efficient degradation of tetracycline.

The electrochemical advanced oxidation process (EAOP) has shown significant promise in the field of refractory organic wastewater treatment due to its high efficiency and environmentally friendly nature. In this study, Ti/Sb-SnO2 electrodes with varying proportions of Hf were prepared using the sol-gel method. The addition of Hf transformed the original collapsing and broken surface into a flat and regular surface. The results demonstrated that Ti/Sb-SnO2-Hf electrode doped with 6% Hf exhibited a higher oxygen evolution potential (OEP) and excellent stability. The OEP increased from 2.315 V without Hf-doping to 2.482 V, and the corresponding actual life was 321.05% higher than that without Hf. The current density (5-40 mA·cm-2), electrolyte concentration (0.02-0.2 mol·L-1), pH (3-11), and initial pollutant concentration (5-80 mg·L-1) were evaluated to confirm the tetracycline (TC) degradation characterization of Ti/Sb-SnO2-6%Hf electrodes. It was concluded that under the optimal degradation conditions, the removal rate of TC could reach 99.66% within 2 h. The degradation of TC follows first-order reaction kinetics. The oxidative degradation of TC was achieved through indirect oxidation, with ·OH playing a dominant role. TC's electrochemical oxidation degradation pathway has been proposed: Based on LC-MS results, three main pathways are speculated. During the electrocatalytic oxidation process, decarboxylation, deamidation, and ring-opening reactions occur under ·OH attack, producing intermediate compounds with m/z values of 427, 433, 350, 246, 461, 424, 330, 352, 309, 263, and 233. These intermediates are further oxidized to intermediate compounds with an m/z value of 218. This work introduces a new efficient anode electrochemical catalyst for the degradation of TC, providing a strategy for industrial applications.

Effective Non-Radiative Interfacial Recombination Suppression Scenario Using Air Annealing for Antimony Triselenide Thin-Film Solar Cells.

Antimony triselenide (Sb2Se3) has become a very promising candidate for next-generation thin-film solar cells due to the merits of their low-cost, low-toxic and excellent optoelectronic properties. Despite Sb2Se3 thin-film photovoltaic technology having undergone rapid development over the past few years, insufficient doping concentration and severe recombination have been the most challenging limitations hindering further breakthroughs for the Sb2Se3 solar cells. Post-annealing treatment of the Sb2Se3/CdS heterojunction was demonstrated to be very helpful in improving the device performance previously. In this work, post-annealing treatments were applied to the Sb2Se3/CdS heterojunction under a vacuum and in the air, respectively. It was found that compared to the vacuum annealing scenario, the air-annealed device presented notable enhancements in open-circuit voltage. Ultimately a competitive power conversion efficiency of 7.62% was achieved for the champion device via air annealing. Key photovoltaic parameters of the Sb2Se3 solar cells were measured and the effects of post-annealing treatments using different scenarios on the devices were discussed.

Activation of neutrophils excels the therapeutic potential of Mycobacterium indicus pranii and heat-induced promastigotes against antimony-resistant Leishmania donovani infection.

Repurposing drugs and adjuvants is an attractive choice of present therapy that reduces the substantial costs, chances of failure, and systemic toxicity. Mycobacterium indicus pranii was originally developed as a leprosy vaccine but later has been found effective against Leishmania donovani infection. To extend our earlier study, here we reported the immunotherapeutic modulation of the splenic and circulatory neutrophils in favour of hosts as neutrophils actually serve as the pro-parasitic portable shelter to extend the Leishmania infection specifically during the early entry into the hosts' circulation. We targeted to disrupt this early pro-parasitic incidence by the therapeutic combination of M. indicus pranii and heat-induced promastigotes against antimony-resistant L. donovani infection. The combination therapy induced the functional expansion of CD11b+Ly6CintLy6Ghi neutrophils both in the post-infected spleen, and also in the circulation of post-treated animals followed by the immediate Leishmania infection. More importantly, the enhanced expression of MHC-II, phagocytic uptake of the parasites by the circulatory neutrophils as well as the oxidative burst were induced that limited the chances of the very early establishment of the infection. The enhanced expression of pro-inflammatory cytokines, like IL-1α and TNF-α indicated resistance to the parasite-mediated takeover of the neutrophils, as these cytokines are critical for the activation of T cell-mediated immunity and host-protective responses. Additionally, the induction of essential transcription factors and cytokines for early granulocytic lineage commitment suggests that the strategy not only contributed to the peripheral activation of the neutrophils but also promoted granulopoiesis in the bone marrow.

Exploring the feasibility of Zr-based metal-organic frameworks for the recovery of Sb (V) and Sb (III) from mining waste.

The present study investigates the efficacy of newly developed Zr-based metal-organic frameworks, specifically MIP-206, and its amine-modified counterpart, MIP-206-NH2, for the re-covery of antimony (Sb) from both synthetic and actual mining wastewater. Batch method studies were employed to examine the effect of waste media pH, Sb concentration, process kinetics, and the performance of the regeneration solution. MIP-206-NH2 exhibited impressive separation capabilities, achieving 102.18 mg/g and 63.23 mg/g for Sb (V) and Sb (III), respectively. In contrast, the pristine MIP-206 reached maximum values of 26.26 mg/g for Sb (V) and 16.95 mg/g for Sb (III). The separation process was well-described by the Langmuir equation, and the kinetics followed the pseudo-second-order model. Although the amine modification resulted in a decrease in the surface area of MIP-206 from 1345.21 to 1169.86 m2/g, SEM and XRD analyses confirmed that the structural integrity of MIP-206-NH2 remained unchanged. In terms of reusability, MIP-206-NH2 maintained up to 90% of its separation performance over 9 cycles, while MIP-206 demonstrated effectiveness for 7 cycles. The regeneration solution exhibited a capacity of approximately 0.63 mol/L for Sb (V) and 0.71 mol/L for Sb (III). Furthermore, MIP-206 and MIP-206-NH2 demonstrated successful application in selectively separating Sb from real mining wastewater.

Analogous Chelation to Boost Utilization of Sb in Sb Nanoparticles and N-doped Carbon Composites for Enhancing Potassium Storage.

Antimony (Sb) is an attractive anode material for potassium-ion batteries (PIBs), but it suffers from aggregation during the charging-discharging process, thus causing embedded active sites and collapsed structure. The analogous chelation refers to the reaction in which the central nanoparticle is linked to the matrix through multiple coordination bonds to form a stable composite. This strategy can inhibit aggregation and maintain the nanosized structure of Sb, thus activating the utilization of Sb active sites and structural stability. Given the special position of nitrogen (N) in the periodic table of elements and the strong bond energy of Sb-N, the N element can serve as an intermediate to connect Sb nanoparticles and an intrinsic N-doped carbon network via strong Sb-N-C/Sb-N═C covalent bonds using analogous chelation. Herein, a hybrid material of Sb@CTF-NC is fabricated via analogous chelation. The Sb atoms exposed on the surface of Sb nanoparticles are used to chelate with the N-doped carbon for high-performance PIBs. The mechanism underwent ex situ characterizations. The calculation of density functional theory reveals that the increase of adsorption energy and reduction of the K+ diffusion barrier accelerate the electrochemical reaction kinetics.

Chemistry of Antimony in Radiopharmaceutical Development: Unlocking the Theranostic Potential of Sb Isotopes.

Antimony-119 (119Sb) holds promise for radiopharmaceutical therapy (RPT), emitting short-range Auger and conversion electrons that can deliver cytotoxic radiation on a cellular level. While it has high promise theoretically, experimental validation is necessary for 119Sb in vivo applications. Current 119Sb production and separation methods face robustness and compatibility challenges in radiopharmaceutical synthesis. Limited progress in chelator development hampers targeted experiments with 119Sb. This review compiles literature on the toxicological, biodistribution and redox properties of Sb, along with existing Sb complexes, evaluating their suitability for radiopharmaceuticals. Sb(III) is suggested as the preferred oxidation state for radiopharmaceutical elaboration due to its stability in vivo and lack of skeletal uptake. While Sb complexes with both hard and soft donor atoms can be achieved, Sb thiol complexes offer enhanced stability and compatibility with the desired Sb(III) oxidation state. For 119Sb to find application in RPT, scientists need to make discoveries and advancements in the areas of isotope production, and radiometal chelation. This review aims to guide future research towards harnessing the therapeutic potential of 119Sb in RPT.

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells with High Open-Circuit Voltages.

Antimony selenosulfide (Sb2(S,Se)3), featuring large absorption coefficient, excellent crystal structure stability, benign non-toxic characteristic, outstanding humidity and ultraviolet tolerability, has recently attracted enormous attention and research interest regarding its photoelectric conversion properties. However, the open-circuit voltage (Voc) for Sb2(S,Se)3-based photovoltaic devices is relatively low, especially for the device with a high power conversion efficiency (η). Herein, an innovative Se-elemental concentration gradient regulation strategy has been exploited to produce high-quality Sb2(S,Se)3 films on TiO2/CdS substrates through a thioacetamide(TA)-synergistic dual-sulfur source hydrothermal-processed method. The Se-elemental gradient distribution produces a favorable energy band structure, which suppresses the energy level barriers for hole transport and enhances the driving force for electron transport in Sb2(S,Se)3 film. This facilitates efficient charge transport/separation of photogenerated carriers and boosts significantly the Voc of Sb2(S,Se)3 photovoltaic devices. The champion TA-Sb2(S,Se)3 planar heterojunction (PHJ) solar cell displays an considerable η of 9.28% accompanied by an exciting Voc rising to 0.70 V that is currently the highest among Sb2(S,Se)3-based solar cells with efficiencies exceeding 9.0%. This research is anticipated to contribute to the preparation of high-quality Sb2(S,Se)3 thin film and the achievement of efficient inorganic Sb2(S,Se)3 PHJ photovoltaic device.

Multilevel Conductance States of Vapor-Transport-Deposited Sb2S3 Memristors Achieved via Electrical and Optical Modulation.

The pursuit of advanced brain-inspired electronic devices and memory technologies has led to explore novel materials by processing multimodal and multilevel tailored conductive properties as the next generation of semiconductor platforms, due to von Neumann architecture limits. Among such materials, antimony sulfide (Sb2S3) thin films exhibit outstanding optical and electronic properties, and therefore, they are ideal for applications such as thin-film solar cells and nonvolatile memory systems. This study investigates the conduction modulation and memory functionalities of Sb2S3 thin films deposited via the vapor transport deposition technique. Experimental results indicate that the Ag/Sb2S3/Pt device possesses properties suitable for memory applications, including low operational voltages, robust endurance, and reliable switching behavior. Further, the reproducibility and stability of these properties across different device batches validate the reliability of these devices for practical implementation. Moreover, Sb2S3-based memristors exhibit artificial neuroplasticity with prolonged stability, promising considerable advancements in neuromorphic computing. Leveraging the photosensitivity of Sb2S3 enables the Ag/Sb2S3/Pt device to exhibit significant low operating potential and conductivity modulation under optical stimulation for memory applications. This research highlights the potential applications of Sb2S3 in future memory devices and optoelectronics and in shaping electronics with versatility.

Endocrine system, cell growth and death, and energy metabolism induced by Sb(III) exposure in earthworm (Pheretima guillemi) revealed by transcriptome and metabolome analysis.

Antimony (Sb) is known for its severe and extensive toxicity, and earthworms are considered important indicator organisms in soil ecosystems. Therefore, the present study investigated the mechanism of toxicity of the Sb at different concentrations (50, 200 mg/kg) on earthworms using biochemical indicators, pathological sections, as well as metabolomics and transcriptomics analyses. The results showed that as the exposure concentration increased, both the antioxidant system of earthworms, extent of intestinal damage, and their metabolomic characteristics were significantly enhanced. In the 50 and 200 mg/kg Sb treatment group, 30 and 177 significant differentially changed metabolites (DCMs) were identified, respectively, with the most DCMs being down- and up-regulated, respectively. Metabolomics analysis showed that the contents of dl-tryptophan, glutamic acid, glycine, isoleucine, l-methionine, involved in the protein digestion and absorption as well as aminoacyl-tRNA biosynthesis were significantly up-regulated under the 200 mg/kg treatment. At the transcriptional level, Sb mainly affected the immune system, nervous system, amino acid metabolism, endocrine system, and carbohydrate metabolism in earthworms. The integration of transcriptomic and metabolomic data indicated that high doses of Sb regulated the metabolites and genes related to the oxidative phosphorylation pathway in earthworms. Overall, these results revealed global responses beyond the scope of conventional toxicity endpoints and facilitated a more in-depth and comprehensive assessment of the toxic effects of Sb.

Optimizing Antimony Speciation Analysis via Frontal Chromatography-ICP-MS to Explore the Release of PET Additives.

Antimony (Sb) contamination poses significant environmental and health concerns due to its toxic nature and widespread presence, largely from anthropogenic activities. This study addresses the urgent need for an accurate speciation analysis of Sb, particularly in water sources, emphasizing its migration from polyethylene terephthalate (PET) plastic materials. Current methodologies primarily focus on total Sb content, leaving a critical knowledge gap for its speciation. Here, we present a novel analytical approach utilizing frontal chromatography coupled with inductively coupled plasma mass spectrometry (FC-ICP-MS) for the rapid speciation analysis of Sb(III) and Sb(V) in water. Systematic optimization of the FC-ICP-MS method was achieved through multivariate data analysis, resulting in a remarkably short analysis time of 150 s with a limit of detection below 1 ng kg-1. The optimized method was then applied to characterize PET leaching, revealing a marked effect of the plastic aging and manufacturing process not only on the total amount of Sb released but also on the nature of leached Sb species. This evidence demonstrates the effectiveness of the FC-ICP-MS approach in addressing such an environmental concern, benchmarking a new standard for Sb speciation analysis in consideration of its simplicity, cost effectiveness, greenness, and broad applicability in environmental and health monitoring.

Removal of Aqueous Antimony and Arsenic by Iron-Loaded Coal Gasification Slag Composite.

The adsorption of Sb(V) and As(V) onto iron-loaded gasification slag composite material (Fe-GFS), as well as the possible mechanisms, was investigated. Batch experiments showed that in a single system, Fe-GFS sorbed As(V) to a greater extent than Sb(V) with the maximum adsorption capacity (pH 3.0) of 34.99 mg/g (0.47 mmol/g), while that of Sb(V) was 27.61 mg/g (0.23 mmol/g). In the composite system, the presence of low concentrations of Sb(V) reduced the adsorption efficiency of Fe-GFS for As(V), while the presence of high concentrations of Sb(V) actually promoted the adsorption of As(V). The presence of As(V) consistently inhibited the adsorption of Sb(V) by Fe-GFS. Compared to Fe-GFS, new peaks appeared in the FTIR spectra after adsorption, indicating the presence of Sb-O and As-O bonds on the surface after adsorption. XPS results showed that the adsorption of As(V) and Sb(V) led to a decrease in Fe-OH bonds, with a more significant decrease in Fe-OH bonds observed after the adsorption of As(V), indicating a stronger affinity of Fe-GFS for As(V) compared to Sb(V). Our results suggest that Fe-GFS is an efficient adsorbent with great potential for applications in water containing As(V) and Sb(V).

Managing antimony pollution: Insights into Soil-Plant system dynamics and remediation Strategies.

Researchers are increasingly concerned about antimony (Sb) in ecosystems and the environment. Sb primarily enters the environment through anthropogenic (urbanization, industries, coal mining, cars, and biosolid wastes) and geological (natural and chemical weathering of parent material, leaching, and wet deposition) processes. Sb is a hazardous metal that can potentially harm human health. However, no comprehensive information is available on its sources, how it behaves in soil, and its bioaccumulation. Thus, this study reviews more than 160 peer-reviewed studies examining Sb's origins, geochemical distribution and speciation in soil, biogeochemical mechanisms regulating Sb mobilization, bioavailability, and plant phytotoxicity. In addition, Sb exposure effects plant physio-morphological and biochemical attributes were investigated. The toxicity of Sb has a pronounced impact on various aspects of plant life, including a reduction in seed germination and impeding plant growth and development, resulting from restricted essential nutrient uptake, oxidative damages, disruption of photosynthetic system, and amino acid and protein synthesis. Various widely employed methods for Sb remediation, such as organic manure and compost, coal fly ash, biochar, phytoremediation, microbial-based bioremediation, micronutrients, clay minerals, and nanoremediation, are reviewed with a critical assessment of their effectiveness, cost-efficiency, and suitability for use in agricultural soils. This review shows how plants deal with Sb stress, providing insights into lowering Sb levels in the environment and lessening risks to ecosystems and human health along the food chain. Examining different methods like bioaccumulation, bio-sorption, electrostatic attraction, and complexation actively works to reduce toxicity in contaminated agricultural soil caused by Sb. In the end, the exploration of recent advancements in genetics and molecular biology techniques are highlighted, which offers valuable insights into combating Sb toxicity. In conclusion, the findings of this comprehensive review should help develop innovative and useful strategies for minimizing Sb absorption and contamination and thus successfully managing Sb-polluted soil and plants to reduce environmental and public health risks.

Large-Area Transparent Antimony-Based Perovskite Glass for High-Resolution X-ray Imaging.

Nonlead low-dimensional halide perovskites attract considerable attention as X-ray scintillators. However, most scintillation screens exhibit pronounced light scattering, which detrimentally reduces the quality of X-ray imaging. Herein, we employed a simple and straightforward solvent-free melt-quenching method to fabricate a large-area zero-dimension (0D) antimony-based perovskite transparent medium, namely (C20H20P)2SbCl5 (C20H20P+ = ethyltriphenylphosphine). The transparency is due to the large steric hindrance of C20H20P+, which hinders the formation of crystals during the quenching process, thus forming a glass with low refractive index and uniform structure. This medium exhibits a high transmittance exceeding 80% in the range of 450-800 nm and shows a large Stokes shift of 245 nm, thereby minimizing light scattering, mitigating self-absorption, and enhancing the clarity of X-ray imaging. Moreover, it exhibits a high radioluminescence light yield of ∼12,535 photons MeV-1 and displays a high X-ray spatial resolution of 30 lp mm-1 owing to its high transparency. This study presents an alternative candidate for achieving high-quality X-ray detection and extends the applicability of transparent perovskite scintillators.

Antimony Isotope Fractionation during Kinetic Sb(III) Oxidation by Antimony-Oxidizing Bacteria Pseudomonas sp. J1.

Antimony (Sb) isotopic fractionation is frequently used as a proxy for biogeochemical processes in nature. However, to date, little is known about Sb isotope fractionation in biologically driven reactions. In this study, Pseudomonas sp. J1 was selected for Sb isotope fractionation experiments with varying initial Sb concentration gradients (50-200 µM) at pH 7.2 and 30 °C. Compared to the initial Sb(III) reservoir (δ123Sb = 0.03 ± 0.01 ∼ 0.06 ± 0.01‰), lighter isotopes were preferentially oxidized to Sb(V). Relatively constant isotope enrichment factors (ε) of -0.62 ± 0.06 and -0.58 ± 0.02‰ were observed for the initial Sb concentrations ranging between 50 and 200 µM during the first 22 days. Therefore, the Sb concentration has a limited influence on Sb isotope fractionation during Sb(III) oxidation that can be described by a kinetically dominated Rayleigh fractionation model. Due to the decrease in the Sb-oxidation rate by Pseudomonas sp. J1, observed for the initial Sb concentration of 200 µM, Sb isotope fractionation shifted toward isotopic equilibrium after 22 days, with slightly heavy Sb(V) after 68 days. These findings provide the prospect of using Sb isotopes as an environmental tracer in the Sb biogeochemical cycle.