Synthesis and Structural Characterization of Carbazole-Tailored Luminescent Triarylmethyl Radical and its Stable Cation.

The development of novel luminescent radicals, characterized by their unique doublet emission, endows a significant challenge. In this study, we reported the synthesis of a luminescent neutral radical, BCzAnM-R, tailored by two carbazolyl groups and an anthryl group to achieve a nonalternant structure. It exhibited near-infrared emission with a peak at 1020 nm in toluene. Interestingly, its corresponding cation, BCzAnM-C, was synthesized through an unconventional SnCl2-mediated reduction-aromatization-oxidation reaction in one-pot and gram-scale. The cation demonstrated remarkable stability for up to weeks in ambient conditions and facilitated the silica-gel chromatography isolation as an organic salt with SnCl3- as the counter ion. The carbazolyl groups effectively modulate molecular structures, photophysical properties, and stabilities. Notably, BCzAnM-R represents the first luminescent triarylmethyl radical with two carbazolyl groups directly attached to the central carbon.

Catalytic Dearomative [1,5]-Sigmatropic Carbon Shift of Heterole-Fused Norcaradienes Enabled Concise Helicenation.

In contrast to the locked fluxionality of norcaradienes fused by benzene, unexplored less aromatic heterole-fused norcaradienes, creatively generated by intramolecular hydroarylation of heteroaryl alkynylcyclopropanes, reserve a balancing fluxionality that permits a dearomative 1,5-sigmatropic carbon shift of norcaradienes akin to the reduced aromaticity of heterole. This "walk" shift was confirmed by the isolation of a cycloheptatriene species derived from ring-expansion of a dearomatized alkynylated heterole-fused norcaradiene. A following ester-directed ring-opening rearomatization of these dearomatized heterole-fused norcaradienes gives the products featuring migratory acylmethyls that are competent for helicenation with the neighboring (hetero)arenes via (formal) dehydrative alkenylation. Such balancing reactivity of heterole-fused norcaradienes will open up the opportunity for the development of controllable reactions of fused norcaradienes.

Copper-Catalyzed Aromatization-Driven Ring-Opening Amination and Oxygenation of Spiro Dihydroquinazolinones.

Mild and inexpensive copper-catalyzed aromatization-driven ring-opening amination and oxygenation of spiro dihydroquinazolinones are presented, respectively. These protocols provide facile and atom-economical access to the aminated and the carbonyl-containing quinazolin-4(3H)-ones in good yields with good functional group compatibility, which are difficult to obtain by conventional methods. Remarkably, a telescoped procedure involving the condensation and the ring-opening/functionalization for simple cycloalkanone was found to be accessible. Mechanistic studies suggest a radical pathway for this transformation.

Direct Synthesis for Benzofuro[3,2-d]pyrimidin-2-Amines via One-Pot Cascade [4+2] Annulation/Aromatization between Benzofuran-Derived Azadienes and Carbodiimide Anions.

The chemoselective [4+2] annulation/aromatization reactions between benzofuran-derived azadienes and N-Ts cyanamides are developed, affording a convenient method for synthesizing benzofuro[3,2-d]pyrimidin-2-amines under mild conditions. Herein, N-Ts cyanamides participated in reactions selectively via carbodiimide anion intermediates and the corresponding cyanamide anion intermediates derived products were not observed. The proposed chemoselective stepwise reaction mechanism was well supported by DFT calculations.

Ene-Reductase-Catalyzed Aromatization of Simple Cyclohexanones to Phenols.

Direct aromatization of cyclohexanones to synthesize substituted phenols represents a significant challenge in modern synthetic chemistry. Herein, we describe a novel ene-reductase (TsER) catalytic system that converts substituted cyclohexanones into the corresponding phenols. This process involves the successive dehydrogenation of two saturated carbon-carbon bonds within the six-membered ring of cyclohexanones and utilizes molecular oxygen to drive the reaction cycle. It demonstrates a versatile and efficient approach for the synthesis of substituted phenols, providing a valuable complement to existing chemical methodologies.

Recent Progress on the Involvement of Formaldehyde in the Methanol-to-Hydrocarbons Reaction.

The conversion of methanol-to-hydrocarbons (MTH) over zeolite catalysts has been the subject of intense research since its discovery. Great effort has been devoted to the investigation of four key topics: the initiation of C-C bonds, the establishment of hydrocarbon pool (HCP), the adjustment of product selectivity, and the deactivation process of catalysts. Despite 50 years of study, some mechanisms remain controversial. However, an intermediate species, formaldehyde (HCHO), has recently garnered considerable attention for its influence on the entire MTH process. The discovery of HCHO and its significant role in the MTH process has been facilitated by the application of in situ analytical techniques, such as synchrotron radiation photoionization mass spectrometry (SR-PIMS) and photoelectron photoion coincidence spectroscopy (PEPICO). It is now revealed that HCHO is involved in the initiation, propagation, and termination process of MTH reaction. Such mechanistic understanding of HCHO's involvement has provided valuable insights for optimizing the MTH process.

Oregano and thyme by-products of olive oil aromatization process with microwave assisted extraction as a rich source of bio-active constituents.

Introduction: Processing of Medicinal Aromatic Plants (MAPs) results in the production of a significant amount of by-products, which are not commercially exploitable. Towards this direction, we studied extensively the by-products of oregano and thyme, remaining after the aromatization of olive oils with microwave assisted extraction (MAE). The purpose of the study was the exploitation of the "wastes" of these two economically significant herbs of Greece, for the potential development of innovative bioactive products. Methods: Hence, superior and inferior quality plant material from Origanum vulgare subsp. hirtum and Thymus vulgaris, were extracted with extra virgin olive oil using MAE. For the evaluation of raw plant material, beside the characterization of the essential oils (EOs), the hydroalcoholic extracts of superior and inferior plant material were afforded by ultrasound assistant extraction (UAE). In addition, the remaining plant material after the flavoring of olive oil by MAE, was extracted with c-Hex, MeOH, H2O:MeOH using UAE. All the extracts were evaluated for their DPPH free radical scavenging activity and total phenolic content (TPC) as well as their chemical profile was investigated by HPTLC. In parallel, the EOs, the olive oils and the c-Hex extracts were analyzed by GC-MS and Headspace Solid Phase Microextraction (HS-SPME)-GC-MS. Results and Discussion: The results showed that the composition of the EOs and the volatile fraction of the olive oil extracts were similar for the superior quality material whereas for the inferior the composition of the volatile fraction of olive oil extracts was not analogous to the respective EOs. GC-MS analyses of oregano and thyme by-products revealed the presence of carvacrol, thymol, γ-terpinene and p-cymene among the major constituents. Moreover, the hydroalcoholic extracts obtained from the plant material remaining after olive oil flavoring with MAE showed similar phenolic content and scavenging activity with the hydroalcoholic extracts of the corresponding raw plant materials underlying their potent use in the preparation of high-added value products such as nutraceuticals and cosmeceuticals as well as enriched animal nutrition products.

A Type of Stable Amides Behaves as Acyl Transfer Reagents upon Visible-Light Irradiation through Self-Aromatization.

Organic molecules with light-modifiable reactivity are important in many fields because they can serve as the "switch" for light to trigger chemical processes. Herein, we disclose a new type of stable non-twisted amides, the reactivity of which can be turned on by light as acyl transfer reagents. Upon photo-activation, these amides react with various nucleophiles including amines, phenols, hydroxide, thiols, boronic acids, and alkynes either under metal-free or metal-catalysis conditions. This reactivity hinges on the design and synthesis of a photo-activatable reagent (7-nitro-5,6-dihydrophenanthridine), which undergoes self-aromatization enabled by an internal oxidant under light. This masked acyl donor group is anticipated to be useful in scenarios where light is preferred to trigger a chemical process.

Disinfectant-Assisted Preparation of Hierarchical ZSM-5 Zeolite with Excellent Catalytic Stabilities in Propane Aromatization.

A series of quaternary ammonium or phosphonium salts were applied as zeolite growth modifiers in the synthesis of hierarchical ZSM-5 zeolite. The results showed that the use of methyltriphenylphosphonium bromide (MTBBP) could yield nano-sized hierarchical ZSM-5 zeolite with a "rice crust" morphology feature, which demonstrates a better catalytic performance than other disinfect candidates. It was confirmed that the addition of MTBBP did not cause discernable adverse effects on the microstructures or acidities of ZSM-5, but it led to the creation of abundant meso- to marco- pores as a result of aligned tiny particle aggregations. Moreover, the generation of the special morphology was believed to be a result of the coordination and competition between MTBBP and Na+ cations. The as-synthesized hierarchical zeolite was loaded with Zn and utilized in the propane aromatization reaction, which displayed a prolonged lifetime (1430 min vs. 290 min compared with conventional ZSM-5) and an enhanced total turnover number that is four folds of the traditional one, owing to the attenuated hydride transfer reaction and slow coking rate. This work provides a new method to alter the morphological properties of zeolites with low-cost disinfectants, which is of great potential for industrial applications.

Application of Sublimation in the Synthesis and Crystal Growth of Organosulfones.

The solvent-free elimination of sulfinic acid and aromatization of 1,6-trans-substituted bis(arylsulfone) trienes is reported. It is shown that sublimation can be used as a 'green' method to combine the thermal transformation of six trienes and the crystal growth of the resulting 4-(phenylsulfonyl)biphenyls. When the sublimation conditions are carefully controlled, high quality single crystals of the 4-(phenylsulfonyl)biphenyls are obtained. Theoretical modelling of the reaction using the simplified triene Ph-(CH)6-SO2H showed that the cyclization is energetically feasible and that the complete conversion is possible during the timescale of the sublimation. At temperatures slightly higher than the optimum sublimation temperature two of the trienes transformed into 1,4-cyclohexadienes that did not eliminate phenylsulfinic acid. A reaction mechanism involving a 1,3-hydrogen shift induced by free PhS• radicals is proposed for the formation of the 1,4-cyclohexadienes.

Surface-Engineered Cesium Lead Bromide Perovskite Nanocrystals for Enabling Photoreduction Activity.

In recent years, colloidal lead halide perovskite (LHP) nanocrystals (NCs) have exhibited such intriguing light absorption properties to be contemplated as promising candidates for photocatalytic conversions. However, for effective photocatalysis, the light harvesting system needs to be stable under the reaction conditions propaedeutic to a specific transformation. Unlike photoinduced oxidative reaction pathways, photoreductions with LHP NCs are challenging due to their scarce compatibility with common hole scavengers like amines and alcohols. In this contribution, it is investigated the potential of CsPbBr3 NCs protected by a suitably engineered bidentate ligand for the photoreduction of quinone species. Using an in situ approach for the construction of the passivating agent and a halide excess environment, quantum-confined nanocubes (average edge length = 6.0 ± 0.8 nm) are obtained with a low ligand density (1.73 ligand/nm2) at the NC surface. The bifunctional adhesion of the engineered ligand boosts the colloidal stability of the corresponding NCs, preserving their optical properties also in the presence of an amine excess. Despite their relatively short exciton lifetime (τAV = 3.7 ± 0.2 ns), these NCs show an efficient fluorescence quenching in the presence of the selected electron accepting quinones (1,4-naphthoquinone, 9,10-phenanthrenequinone, and 9,10-anthraquinone). All of these aspects demonstrate the suitability of the NCs for an efficient photoreduction of 1,4-naphthoquinone to 1,4-dihydroxynaphthalene in the presence of triethylamine as a hole scavenger. This chemical transformation is impracticable with conventionally passivated LHP NCs, thereby highlighting the potential of the surface functionalization in this class of nanomaterials for exploring new photoinduced reactivities.

Cr- and Ga-Modified ZSM-5 Catalyst for the Production of Renewable BTX from Bioethanol.

Light aromatics (benzene, toluene, and xylene, collectively known as BTX) are essential commodity chemicals in the petrochemical industry. The present study examines the aromatization of bioethanol with Cr- and Ga-modified ZSM-5. Both Cr and Ga were incorporated by the ion-exchange method. Cr-modified ZSM-5 outperforms the Ga-modified ZSM-5 and H-ZSM-5 catalysts. Cr-H-ZSM-5 almost doubled the carbon yield of aromatics compared to H-ZSM-5 at an optimum reaction temperature of 450 °C. Cr-H-ZSM-5 produced aromatics with a yield of ~40 %. The effect of dilution in feed on BTX production is also studied. Cr-H-ZSM-5 was found to be more active than H-ZSM-5. Complete ethanol conversion was obtained with both pure and dilute bioethanol. The Bronsted-Lewis acid (BLA) pair formed after metal incorporation is responsible for dehydrogenation followed by aromatization, leading to increased aromatic production.

The Effect of Water Co-Feeding on the Catalytic Performance of Zn/HZSM-5 in Ethylene Aromatization Reactions.

During the methanol-to-aromatics (MTA) process, a large amount of water is generated, while the influence and mechanism of water on the activity and selectivity of the light olefin aromatization reaction are still unclear. Therefore, a study was conducted to systematically investigate the effects of water on the reactivity and the product distribution in ethylene aromatization using infrared spectroscopy (IR), intelligent gravitation analyzer (IGA), and X-ray absorption fine structure (XAFS) characterizations. The results demonstrated that the presence of water reduced ethylene conversion and aromatic selectivity while increasing hydrogen selectivity at the same contact time. This indicated that water had an effect on the reaction pathway by promoting the dehydrogenation reaction and suppressing the hydrogen transfer reaction. A detailed analysis using linear combination fitting (LCF) of Zn K-edge X-ray absorption near-edge spectroscopy (XANES) on Zn/HZSM-5 catalysts showed significant variations in the state of existence and the distribution of Zn species on the deactivated catalysts, depending on different reaction atmospheres and water contents. The presence of water strongly hindered the conversion of ZnOH+ species, which served as the active centers for the dehydrogenation reaction, to ZnO on the catalyst. As a result, the dehydrogenation activity remained high in the presence of water. This study using IR and IGA techniques revealed that water on the Zn/HZSM-5 catalyst inhibited the adsorption of ethylene on the zeolite, resulting in a noticeable decrease in ethylene conversion and a decrease in aromatic selectivity. These findings contribute to a deeper understanding of the aromatization reaction process and provide data support for the design of efficient aromatization catalysts.

A Fine Analysis of Zn Species Structure and Distribution in Zn/ZSM-5 Catalysts by Linear Combination Fitting Analysis of XANES Spectra.

Investigating the distribution of different Zn species on Zn-containing zeolite catalysts is crucial for identifying the active sites and establishing the relationship between the catalyst's structure and its activity in the process of ethylene aromatization. By utilizing X-ray absorption near edge spectra (XANES) of various reference samples, this study employed linear combination fitting (LCF) analysis on XANES spectra of real samples to accurately measure the changes in the distribution of Zn species in Zn-containing HZSM-5 zeolites under different Zn sources and loadings. The results showed that ZnOH+, ZnO clusters, and ZnO crystalline structures coexist in Zn/HZSM-5 catalysts prepared through physical mixing and incipient wet impregnation methods. A similar trend was observed for catalysts prepared using different methods, with an increase in Zn content resulting in a decrease in the proportion of ZnOH+ and a significant increase in the amount of larger ZnO crystals. Furthermore, ZnO clusters were confined within the zeolite pores. The findings of this study established a direct correlation between the amount of ZnOH+ determined through LCF analysis and both the rate of hydrogen production and the rate of aromatics formation, providing strong evidence for the catalytic role of ZnOH+ as an active center for dehydrogenation, which plays a key role in promoting the formation of aromatics. The method of LCF analysis on XANES spectra allows for the determination of the local structure of Zn species, facilitating a more precise analysis based on the distribution of these species. This method not only provides detailed information about the Zn species but also enhances the accuracy of the overall analysis.

Synthesis of substituted 2H-Chromenes via Pd-catalyzed C-H activation and thermal cyclization.

A proficient approach has been developed for the synthesis of substituted 2H-chromenes from C1-substituted glucal. The key step of our synthetic methodology was C-H activation in propylene carbonate solvent followed by 6π-electrocyclization aromatization in ethylene glycol as greener substitutes to toxic aprotic solvents, to obtain 2H-chromenes in a stepwise manner. The application of the developed methodology was further explored with the synthesis of a small library of substituted 2H-chromenes in good yields.

Green Synthesis of UV-Reactive Polycarbonates from Levoglucosenone and 5-Hydroxymethyl Furfural.

This study focuses on the synthesis of fully renewable polycarbonates (PCs) starting from cellulose-based platform molecules levoglucosenone (LGO) and 2,5-bis(hydroxymethyl)furan (BHMF). These unique bio-based PCs are obtained through the reaction of a citronellol-containing triol (Triol-citro) derived from LGO, with a dimethyl carbonate derivative of BHMF (BHMF-DC). Solvent-free polymerizations are targeted to minimize waste generation and promote an eco-friendly approach with a favorable environmental factor (E-factor). The choice of metal catalyst during polymerization significantly influences the polymer properties, resulting in high molecular weight (up to 755 kDa) when Na2 CO3 is employed as an inexpensive catalyst. Characterization using nuclear magnetic resonance confirms the successful incorporation of the furan ring and the retention of the terminal double bond of the citronellol pendant chain. Furthermore, under UV irradiation, the presence of both citronellol and furanic moieties induces singular structural changes, triggering the formation of three distinct structures within the polymer network, a phenomenon herein occurs for the first time in this type of polymer. These findings pave the way to new functional materials prepared from renewable monomers with tunable properties.

Pro-aromatic Dihydroquinazolinones - From Multigram Synthesis to Reagents for Gram-scale Metallaphotoredox Reactions.

Dihydroquinazolinone (DHQZ) has recently been harnessed as a ketone-derived pro-aromatic reagent extensively employed in (metalla)photoredox reactions as versatile group transfer agents. In this work, we outline a column chromatography-free protocol for the multigram-scale synthesis of pro-aromatic DHQZs as well as its use in a gram-scale nickel/photoredox dual-catalyzed cross-coupling in single-batch, photoflow, and simultaneous multiple smaller batches. While the single-batch approach leveraged moderate yields, a simple plug-flow photoreactor also exhibited amenable productivity (up to 45 % yield) despite the use of a heterogeneous base. Meanwhile, performing the metallaphotoredox-catalyzed reaction in multiple smaller batches in an improvised photoreactor facilitated high yields of up to 59 % and good reproducibility, implying a convenient alternative in the absence of photoflow setups.

Gas-Pressurized Torrefaction of Lignocellulosic Solid Wastes: Deoxygenation and Aromatization Mechanisms of Cellulose.

A novel gas-pressurized (GP) torrefaction method at 250 °C has recently been developed that realizes the deep decomposition of cellulose in lignocellulosic solid wastes (LSW) to as high as 90% through deoxygenation and aromatization reactions. However, the deoxygenation and aromatization mechanisms are currently unclear. In this work, these mechanisms were studied through a developed molecular structure calculation method and the GP torrefaction of pure cellulose. The results demonstrate that GP torrefaction at 250 °C causes 47 wt.% of mass loss and 72 wt.% of O removal for cellulose, while traditional torrefaction at atmospheric pressure has almost no impact on cellulose decomposition. The GP-torrefied cellulose is determined to be composed of an aromatic furans nucleus with branch aliphatic C through conventional characterization. A molecular structure calculation method and its principles were developed for further investigation of molecular-level mechanisms. It was found 2-ring furans aromatic compound intermediate is formed by intra- and inter-molecular dehydroxylation reactions of amorphous cellulose, and the removal of O-containing function groups is mainly through the production of H2O. The three-ring furans aromatic compound intermediate and GP-torrefied cellulose are further formed through the polymerization reaction, which enhances the removal of ketones and aldehydes function groups in intermediate torrefied cellulose and form gaseous CO and O-containing organic molecules. A deoxygenation and aromatization mechanism model was developed based on the above investigation. This work provides theoretical guidance for the optimization of the gas-pressurized torrefaction method and a study method for the determination of molecular-level structure and the mechanism investigation of the thermal conversion processes of LSW.

Synthesis, characterization, and anticancer evaluation of novel 4-hydrazinothiazole analogs.

Single-step synthesis of novel 4-hydrazinothiazole derivatives 6a-e was achieved under mild conditions using the sequential four-components method involving isothiocyanate, aminoguanidine, carbonyl adduct, and α-haloketone derivatives. Deprotection of these hydrazinothiazoles was influenced by acylation, providing a novel group of diacylated molecular structures with a broader scope for the design of thiazolyl-containing drugs 7a and 7b. FTIR, 1 H/13 C NMR, LC-MS spectroscopy, and CHN elemental analyses were used to study the compound chemical structures. Using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay on human periodontal ligament fibroblast (HPDLF) cells, the 4-hydrazinothiazole derivatives were screened for cytotoxicity in an in vitro cytotoxicity investigation. The 4-hydrazinothiazole compound 6b bearing an isopropylidene-hydrazino group demonstrated strongly potent cytotoxicity against CAKI1 (IC50  = 1.65 ± 0.24 µM) and A498 (IC50 of 0.85 ± 0.24 µM). Furthermore, the chloroacetyl-containing thiazole compound 7a displayed efficient inhibition of growth against the test cell lines CAKI1 and A498 at low micromolar concentrations, IC50 0.78 and 0.74 µM, respectively.

Isolable Tetragold(0) Clusters with Polarity-Tunable exo-Au-Au Bond via Intramolecular σ-Aromatization.

Intramolecular π-aromatization is a trait of many organic compounds that enhances the stability of their structures and polarizes related C-C π bonds. In contrast, rare study is focused on this phenomenon in metal clusters. Many existing homometallic clusters exhibit aromaticity, often characterized by nonpolar metal-metal bonds and a high degree of symmetry. However, synthesizing low-symmetric homometallic clusters with high-polar metal-metal bonds is challenging due to their limited thermodynamic stability. Herein, we report a facile strategy for the synthesis of [Au(µ2 -ER2 )]3 -AuPMe3 (E=Ge, Sn; R2 =1,1,4,4-tetrakis(trimethylsilyl)butane-1,4-diyl) clusters and reveal a novel stabilization mode, intramolecular σ-aromatization. Our electronic structure analyses show that these low-symmetric clusters possess a ten-electron σ-aromatic system, which is achieved via intramolecular σ-aromatization. Moreover, the strength of σ-aromaticity gives rise to a polarity-tunable exo-Au-Au bond.