A reliable method to prepare milligram size environmental samples to quantify metal(loid)s by high-resolution graphite furnace atomic absorption spectrometry.

We searched for an extraction method that would allow a precise quantification of metal(loid)s in milligram-size samples using high-resolution graphite furnace atomic absorption spectrometry (HR-GFAAS). We digested biological (DORM-4, DOLT-5 and TORT-3) and sediment (MESS-4) certified reference materials (CRMs) using nitric acid in a drying oven, aqua regia in a drying oven, or nitric acid in a microwave. In addition, we digested MESS-4 using a mixture of nitric and hydrofluoric acids in a drying oven. We also evaluated the effect of sample size (100 and 200 mg) on the extraction efficiency. Nitric acid extraction in a drying oven yielded the greatest recovery rates for all metal(loid)s in all tested CRMs (80.0 %-100.0 %) compared with the other extraction methods tested (67.3 %-99.2 %). In most cases, the sample size did not have a significant effect on the extraction efficiency. Therefore, we conclude that nitric acid digestion in a drying oven is a reliable extraction method for milligram-size samples to quantify metal(loid)s with HR-GFAAS. This validated method could provide substantial benefits to environmental quality monitoring programs by significantly reducing the time and costs required for sample collection, storage, transport and preparation, as well as the amount of hazardous chemicals used during sample extraction and analysis. •Sample digestion with nitric acid in a drying oven yielded the greatest recovery rates of metal(loid)s from biological and sediment certified reference materials.•The recovery rates of metal(loid)s from biological and sediment certified reference materials using nitric acid digestion in a drying oven ranged from 73 % to 100 %.•Digestion with nitric acid in a drying oven is a simple and reliable method to extract small size environmental samples for metal(loid)s quantification by high-resolution graphite furnace atomic absorption spectrometry.

Impact of air pollution and heavy metal exposure on sperm quality: A clinical prospective research study.

Exposure to air pollution poses significant risks to human health, including detrimental effects on the reproductive system, affecting both men and women. Our prospective clinical study aimed to assess the impact of prolonged air pollution exposure on sperm quality in male patients attending a fertility clinic. The current study was conducted at Sri Narayani Hospital and Research Centre in Vellore, Tamil Nadu, India, and the study examined sperm samples obtained from individuals with extended exposure to air pollution. Microscopic analysis, including scanning electron microscopy (SEM), was conducted to evaluate sperm morphology. At the same time, atomic absorption spectroscopy (AAS) determined the presence of heavy metals, including Zinc (Zn), Magnesium (Mg), Lead (Pb) and Cadmium (Cd), known to affect sperm production. Our findings revealed that long-term exposure to air pollution adversely affects sperm quality, manifesting in alterations during the spermatogenesis cycle, morphological abnormalities observed through SEM, and impaired sperm motility. Additionally, epidemiological evidence suggests that elevated levels of cadmium and lead in the environment induce oxidative stress, leading to sperm DNA damage and reduced sperm concentrations. These results underscore the urgent need for environmental interventions to mitigate air pollution and protect reproductive health.

Comparative Evaluation of Surface Roughness of Different Rotary Nickel-Titanium (NiTi) Files After Autoclaving: An Atomic Force Microscopic Study.

Introduction Canal preparation is a critical step in endodontic therapy. Introducing nickel-titanium (NiTi) rotary instruments has significantly reduced the likelihood of errors in curved canals. However, due to their price, these instruments are often reused following autoclaving. The aim of this study is to compare and evaluate the surface characteristics of two designs of rotary NiTi files used in curved canals and subjected to multiple autoclaving cycles, utilizing an atomic force microscope for detailed analysis. Methods A total sample size of 24 files was taken, 12 files of Hyflex EDM (Coltene/Whaledent, Germany) files and WaveOne Gold (Dentsply Sirona, USA) files were then divided into four groups (n=6) as follows: Group I: Hyflex EDM control group; Group II: WaveOne Gold control group; Group III: Hyflex EDM experimental group; Group IV: WaveOne Gold experimental group. Sterilization using an autoclave was performed thrice for Groups I and II files. The files in Groups III and IV were used in simulated curved canals three times and autoclaved after each use. Atomic force microscopy was used to assess the surface roughness of the files after the first and third autoclave cycles. Results The results showed that, without statistical significance, Hyflex EDM exhibited the highest surface roughness after the first usage among the two file systems. Conclusion It can be concluded that both Hyflex EDM and WaveOne Gold files produced similar levels of surface changes when subjected to multiple usage and autoclaving cycles.

Atomic force microscopy as a nanomechanical tool for cancer liquid biopsy.

Liquid biopsies have been receiving tremendous attention for their potential to reshape cancer management. Though current studies of cancer liquid biopsy primarily fucus on applying biochemical assays to characterize the genetic/molecular profiles of circulating tumor cells (CTCs) and their secondary products shed from tumor sites in bodily fluids, delineating the nanomechanical properties of tumor-associated materials in liquid biopsy specimens yields complementary insights into the biology of tumor dissemination and evolution. Particularly, atomic force microscopy (AFM) has become a standard and versatile toolbox for characterizing the mechanical properties of living biological systems at the micro/nanoscale, and AFM has been increasingly utilized to probe the nanomechanical properties of various tumor-derived analytes in liquid biopsies, including CTCs, tumor-associated cells, circulating tumor DNA (ctDNA) molecules, and extracellular vesicles (EVs), offering additional possibilities for understanding cancer pathogenesis from the perspective of mechanobiology. Herein, the applications of AFM in cancer liquid biopsy are summarized, and the challenges and future directions of AFM as a nanomechanical analysis tool in cancer liquid biopsy towards clinical utility are discussed and envisioned.

Enhanced Photocatalytic Properties and Photoinduced Crystallization of TiO2-Fe2O3 Inverse Opals Fabricated by Atomic Layer Deposition.

The use of solar energy for photocatalysis holds great potential for sustainable pollution reduction. Titanium dioxide (TiO2) is a benchmark material, effective under ultraviolet light but limited in visible light utilization, restricting its application in solar-driven photocatalysis. Previous studies have shown that semiconductor heterojunctions and nanostructuring can broaden the TiO2's photocatalytic spectral range. Semiconductor heterojunctions are interfaces formed between two different semiconductor materials that can be engineered. Especially, type II heterojunctions facilitate charge separation, and they can be obtained by combining TiO2 with, for example, iron(III) oxide (Fe2O3). Nanostructuring in the form of 3D inverse opals (IOs) demonstrated increased TiO2 light absorption efficiency of the material, by tailoring light-matter interactions through their photonic crystal structure and specifically their photonic stopband, which can give rise to a slow photon effect. Such effect is hypothesized to enhance the generation of free charges. This work focuses on the above-described effects simultaneously, through the synthesis of TiO2-Fe2O3 IOs via multilayer atomic layer deposition (ALD) and the characterization of their photocatalytic activities. Our results reveal that the complete functionalization of TiO2 IOs with Fe2O3 increases the photocatalytic activity through the slow photon effect and semiconductor heterojunction formation. We systematically explore the influence of Fe2O3 thickness on photocatalytic performance, and a maximum photocatalytic rate constant of 1.38 ± 0.09 h-1 is observed for a 252 nm template TiO2-Fe2O3 bilayer IO consisting of 16 nm TiO2 and 2 nm Fe2O3. Further tailoring the performance by overcoating with additional TiO2 layers enhances photoinduced crystallization and tunes photocatalytic properties. These findings highlight the potential of TiO2-Fe2O3 IOs for efficient water pollutant removal and the importance of precise nanostructuring and heterojunction engineering in advancing photocatalytic technologies.

Flexible inner surface of polysulfone membranes prevents platelet adhesive protein adsorption and improves antithrombogenicity in vitro.

BACKGROUND: We investigated whether the condition of the inner surface of hollow fibers affects the blood compatibility of hemodialyzers. METHODS: We used scanning probe microscope/atomic force microscopy (SPM/AFM) to investigate the height of the swelling and flexible layers (thickness and softness) on the inner surfaces of the hollow fibers. Next, we tested the blood compatibility between dialyzers comprising a hollow fiber membrane, in which the other dialyzers, except for PVP, were additionally coated using PS membranes coated with other materials. After blood was injected into the dialyzer and plugged, dynamic stimulation was performed by slightly rotating the dialyzer for 4 h, although there was no blood circulation. RESULTS: The vitamin E-coated polysulfone (PS) membrane showed a higher thickness and softness of the flexible layer than the asymmetric cellulose triacetate membrane without polyvinylpyrrolidone (PVP) and the PS membranes with PVP. We found that the dialyzer with vitamin E coating significantly suppressed the decrease in platelets, increase in ß-TG, and increase in PF4 compared to those coated with NV polymer. Additionally, as the adsorbed protein on the inner surface, the total protein, fibronectin, and vWF levels were significantly lower in the vitamin E-coated dialyzer. CONCLUSION: The thickness and softness of the flexible layer of the inner surface of the hollow fiber membrane in vitro affect differences in blood coagulation performance in clinical research. Future clinical trials are required to confirm our results.

Pulmonary surfactant and prostaglandin E2 in airway smooth muscle relaxation of human and male guinea pigs.

Pulmonary surfactant serves as a barrier to respiratory epithelium but can also regulate airway smooth muscle (ASM) tone. Surfactant (SF) relaxes contracted ASM, similar to ß2-agonists, anticholinergics, nitric oxide, and prostanoids. The exact mechanism of surfactant relaxation and whether surfactant relaxes hyperresponsive ASM remains unknown. Based on previous research, relaxation requires an intact epithelium and prostanoid synthesis. We sought to examine the mechanisms by which surfactant causes ASM relaxation. Organ bath measurements of isometric tension of ASM of guinea pigs in response to exogenous surfactant revealed that surfactant reduces tension of healthy and hyperresponsive tracheal tissue. The relaxant effect of surfactant was reduced if prostanoid synthesis was inhibited and/or if prostaglandin E2-related EP2 receptors were antagonized. Atomic force microscopy revealed that human ASM cells stiffen during contraction and soften during relaxation. Surfactant softened ASM cells, similarly to the known bronchodilator prostaglandin E2 (PGE2) and the cell softening was abolished when EP4 receptors for PGE2 were antagonized. Elevated levels of PGE2 were found in cultures of normal human bronchial epithelial cells exposed to pulmonary surfactant. We conclude that prostaglandin E2 and its EP2 and EP4 receptors are likely involved in the relaxant effect of pulmonary surfactant in airways.

Formation Characteristics of Pt-Ni Alloy Nanoparticles Fabricated by Nanolamination of Atomic Layer Deposition in Hydrogen.

Forced-flow atomic layer deposition nanolamination is employed to fabricate Pt-Ni nanoparticles on XC-72, with the compositions ranging from Pt94Ni6 to Pt67Ni33. Hydrogen is used as a co-reactant for depositing Pt and Ni. The growth rate of Pt is slower than that using oxygen reactant, and the growth exhibits preferred orientation along the (111) plane. Ni shows much slower growth rate than Pt, and it is only selectively deposited on Pt, not on the substrate. Higher ratios of Ni would hinder subsequent stacking of Pt atoms, resulting in lower overall growth rate and smaller particles (1.3-2.1 nm). Alloying of Pt with Ni causes shifted lattice that leads to larger lattice parameter and d-spacing as Ni fraction increases. From the electronic state analysis, Pt 4f peaks are shifted to lower binding energies with increasing the Ni content, suggesting charge transfer from Ni to Pt. Schematic of the growth behavior is proposed. Most of the alloy nanoparticles exhibit higher electrochemical surface area and oxygen reduction reaction activity than those of commercial Pt. Especially, Pt83Ni17 and Pt87Ni13 show excellent mass activities of 0.76 and 0.59 A mgPt -1, respectively, higher than the DOE target of 2025, 0.44 A mgPt -1.

Investigation of Mode-Induced Spin Wave Transmission Blockage by In Situ Nanoscale Grooves.

In the pursuit of advancing spin-wave optics, the propagation of magnetostatic surface spin-waves is investigated in a uniform permalloy waveguide with in-situ nanopatterned grooves created through Atomic Force Microscopy nanolithography and Focused Ion Beam etching. The study unveils that the introduction of narrow constrictions and grooves leads to a non-monotonic reduction of the transmitted spin-wave signal intensity as the spin-wave pathway is shrinked. The remarkable feature that a stronger signal extinction is obtained for a narrow groove compared to a spin-waveguide interrupted by a full gap, where only inefficient transport through dipolar coupling is allowed, is highlighted. Combining experimental and numerical analyses, the intricate interplay between spin-wave diffraction and reflection at the waveguide edges is unraveled, being at the origin of a transverse-mode variation responsible for the signal extinction when detected using coplanar antennas. The findings offer insights into the controllable manipulation of detected spin-wave intensity, thereby opening promising avenues for the improvement of spin-wave switches and interferometers, and for the nanopatterning of graded index magnonics.

Methylglyoxal alters collagen fibril nanostiffness and surface potential.

Collagen fibrils are fundamental to the mechanical strength and function of biological tissues. However, they are susceptible to changes from non-enzymatic glycation, resulting in the formation of advanced glycation end-products (AGEs) that are not reversible. AGEs accumulate with aging and disease and can adversely impact tissue mechanics and cell-ECM interactions. AGE-crosslinks have been related, on the one hand, to dysregulation of collagen fibril stiffness and damage and, on the other hand, to altered collagen net surface charge as well as impaired cell recognition sites. While prior studies using Kelvin probe force microscopy (KPFM) have shown the effect glycation has on collagen fibril surface potential (i.e., net charge), the combined effect on individual and isolated collagen fibril mechanics, hydration, and surface potential has not been documented. Here, we explore how methylglyoxal (MGO) treatment affects the mechanics and surface potential of individual and isolated collagen fibrils by utilizing atomic force microscopy (AFM) nanoindentation and KPFM. Our results reveal that MGO treatment significantly increases nanostiffness, alters surface potential, and modifies hydration characteristics at the collagen fibril level. These findings underscore the critical impact of AGEs on collagen fibril physicochemical properties, offering insights into pathophysiological mechanical and biochemical alterations with implications for cell mechanotransduction during aging and in diabetes. STATEMENT OF SIGNIFICANCE: Collagen fibrils are susceptible to glycation, the irreversible reaction of amino acids with sugars. Glycation affects the mechanical properties and surface chemistry of collagen fibrils with adverse alterations in biological tissue mechanics and cell-ECM interactions. Current research on glycation, at the level of individual collagen fibrils, is sparse and has focused either on collagen fibril mechanics, with contradicting evidence, or surface potential. Here, we utilized a multimodal approach combining Kelvin probe force (KPFM) and atomic force microscopy (AFM) to examine how methylglyoxal glycation induces structural, mechanical, and surface potential changes on the same individual and isolated collagen fibrils. This approach helps inform structure-function relationships at the level of individual collagen fibrils.

Atomic Defects Engineering Boosts Urea Synthesis toward Carbon Dioxide and Nitrate Coelectroreduction.

The atomic defect engineering could feasibly decorate the chemical behaviors of reaction intermediates to regulate catalytic performance. Herein, we created oxygen vacancies on the surface of In(OH)3 nanobelts for efficient urea electrosynthesis. When the oxygen vacancies were constructed on the surface of the In(OH)3 nanobelts, the faradaic efficiency for urea reached 80.1%, which is 2.9 times higher than that (20.7%) of the pristine In(OH)3 nanobelts. At -0.8 V versus reversible hydrogen electrode, In(OH)3 nanobelts with abundant oxygen vacancies exhibited partial current density for urea of -18.8 mA cm-2. Such a value represents the highest activity for urea electrosynthesis among recent reports. Density functional theory calculations suggested that the unsaturated In sites adjacent to oxygen defects helped to optimize the adsorbed configurations of key intermediates, promoting both the C-N coupling and the activation of the adsorbed CO2NH2 intermediate. In-situ spectroscopy measurements further validated the promotional effect of the oxygen vacancies on urea electrosynthesis.

Spatially Confined Alloying of Pt Accelerates Mass Transport for Fuel Cell Oxygen Reduction.

Pt-based alloy with high mass activity and durability is highly desired for proton exchange membrane fuel cells, yet a great challenge remains due to the high mass transport resistance near catalysts with lowering Pt loading. Herein, an extensible approach employing atomic layer deposition to accurately introduce a gas-phase metal precursor into platinum nanoparticles (NPs) pre-filled mesoporous channels is reported, achieved by controlling both the deposition site and quantity. Following the spatially confined alloying treatment, the prepared PtSn alloy catalyst within mesopores demonstrates a small size and homogeneous distribution (2.10 ± 0.53 nm). The membrane electrode assembly with mesoporous carbon-supported PtSn alloy catalyst achieves a high initial mass activity of 0.85 A mg Pt - 1 ${\mathrm{mg}}_{\mathrm{Pt}}^{-1}$ at 0.9 V, which is attributed to the smallest local oxygen transport resistance (3.68 S m-1) ever reported. The mass activity of the catalyst only decreases by 11% after 30000 cycles of accelerated durability test, representing superior full-cell durability among the reported Pt-based alloy catalysts. The enhanced activity and durability are attributed to the decreased adsorption energy of oxygen intermediates on Pt surface and the strong electronic interaction between Pt and Sn inhibiting Pt dissolution.

Evaluation of hair surface structure and morphology of patients with lichen planopilaris (LPP) by atomic force microscopy (AFM).

BACKGROUND: Lichen planopilaris (LPP) is a chronic lymphocytic skin disease manifested by progressive scarring alopecia. The diagnosis of LPP is made based on histopathological examination, although it is not always definite. The current study evaluates the effectiveness of non-invasive atomic force microscopy (AFM) hair examination in detecting morphological differences between healthy and diseased hair. MATERIALS AND METHODS: Here, three to five hairs from lesional skin of 10 LPP patients were collected and examined at nine locations using AFM. At least four images were taken at each of the nine sites. Metric measurements were taken and metric (length, width, and scale step height) and morphological features (striated and smooth surface of scales, the presence of endocuticle and cortex, shape of scales edges, scratches, pitting, cracks, globules, and wavy edge) were compared with hair from healthy controls. In addition, areas on diseased hair where the process of pathological, unnatural delamination of the hair fiber occurs are described. RESULTS: There was a statistically significant difference in the number of scratches in the initial sections of the LPP hair, in the intensity of wavy edges along the entire length of the tested hair, and in the number of scales with pitting in the middle section of the hair. In addition, a statistically significant higher number of scales with striated surface was found in LPP group starting at 3.5 cm from the root continuing towards the free end of the hair. Other morphological changes such as presence of cortex, globules, oval indentations, and rod-like macrofibrillar elements were also assessed, however, detailed results are not presented, as the differences shown in the number of these morphological changes were not significantly different. CONCLUSION: This publication outlines the differences between virgin, healthy Caucasian hair, and the hair of LPP patients. The results of this study can be used for further research and work related to LPP. This is the first attempt to characterize the hair of LPP patients using AFM.

Damage-Free Plasma Source for Atomic-Scale Processing.

As atomic-scale etching and deposition processes become necessary for manufacturing logic and memory devices at the sub-5 nm node, the limitations of conventional plasma technology are becoming evident. For atomic-scale processes, precise critical dimension control at the sub-1 nm scale without plasma-induced damage and high selectivity between layers are required. In this paper, a plasma with very low electron temperature is applied for damage-free processing on the atomic scale. In plasmas with an ultralow electron temperature (ULET, Te < 0.5 eV), ion energies are very low, and the ion energy distribution is narrow. The absence of physical damage in ULET plasma is verified by exposing 2D structural material. In the ULET plasma, charging damage and radiation damage are also expected to be suppressed due to the extremely low Te. This ULET plasma source overcomes the limitations of conventional plasma sources and provides insights to achieve damage-free atomic-scale processes.

FabR, a regulator of membrane lipid homeostasis, is involved in Klebsiella pneumoniae biofilm robustness.

Biofilm is a dynamic structure from which individual bacteria and micro-aggregates are released to subsequently colonize new niches by either detachment or dispersal. Screening of a transposon mutant library identified genes associated with the alteration of Klebsiella pneumoniae biofilm including fabR, which encodes a transcriptional regulator involved in membrane lipid homeostasis. An isogenic ∆fabR mutant formed more biofilm than the wild-type (WT) strain and its trans-complemented strain. The thick and round aggregates observed with ∆fabR were resistant to extensive washes, unlike those of the WT strain. Confocal microscopy and BioFlux microfluidic observations showed that fabR deletion was associated with biofilm robustness and impaired erosion over time. The genes fabB and yqfA associated with fatty acid metabolism were significantly overexpressed in the ∆fabR strain, in both planktonic and biofilm conditions. Two monounsaturated fatty acids, palmitoleic acid (C16:1) and oleic acid (C18:1), were found in higher proportion in biofilm cells than in planktonic forms, whereas heptadecenoic acid (C17:1) and octadecanoic acid, 11-methoxy (C18:0-OCH3) were found in higher proportion in the planktonic lifestyle. The fabR mutation induced variations in the fatty acid composition, with no clear differences in the amounts of saturated fatty acids (SFA) and unsaturated fatty acids for the planktonic lifestyle but lower SFA in the biofilm form. Atomic force microscopy showed that deletion of fabR is associated with decreased K. pneumoniae cell rigidity in the biofilm lifestyle, as well as a softer, more elastic biofilm with increased cell cohesion compared to the wild-type strain.IMPORTANCEKlebsiella pneumoniae is an opportunistic pathogen responsible for a wide range of nosocomial infections. The success of this pathogen is due to its high resistance to antibiotics and its ability to form biofilms. The molecular mechanisms involved in biofilm formation have been largely described but the dispersal process that releases individual and aggregate cells from mature biofilm is less well documented while it is associated with the colonization of new environments and thus new threats. Using a multidisciplinary approach, we show that modifications of bacterial membrane fatty acid composition lead to variations in the biofilm robustness, and subsequent bacterial detachment and biofilm erosion over time. These results enhance our understanding of the genetic requirements for biofilm formation in K. pneumoniae that affect the time course of biofilm development and the embrittlement step preceding its dispersal that will make it possible to control K. pneumoniae infections.

The mechanical properties measurement could be affected by forceps: a technical note on sampling human annulus fibrosus.

PURPOSE: To compare the mechanical properties of human annulus fibrosus obtained by forceps versus bistoury and observe whether the measurement could be affected by forceps sampling method. METHODS: In this study, the mechanical properties of the the extracellular matrix (ECM) of human annulus fibrosus, including elastic modulus and stiffness, were investigated using atomic force microscope (AFM). Tissue was obtained from patients during operation using a bistoury or nucleus pulposus forceps. Tissues obtained with the nucleus pulposus forceps were considered as the forceps group and those obtained with a bistoury were considered as the bistoury group. RESULTS: There was no significant difference observed between the forceps and bistoury group according to histological staining. The elastic modulus of the forceps group was 0.41 ± 0.08 MPa, and that of bistoury group was 0.53 ± 0.13 MPa, and the difference between the two groups was statistically significant (p < 0.05). The stiffness of the forceps group was 0.024 ± 0.003 N/m, and that of the bistoury group was 0.037 ± 0.003 N/m, and the difference between the two groups was statistically significant (p < 0.05). CONCLUSION: The results indicate that the forceps sampling method has a substantial negative effect on the micromechanical properties of the ECM of the annulus fibrosus. Bistoury sampling method is recommended as the experimental subject for exploring the micromechanics mechanisms of cervical degenerative disease.

Atomic Scale Responses of High Entropy Oxides to Redox Environments.

The potential of high entropy oxides (HEOs) as high-performance energy storage materials and catalysts has been mainly understood through their bulk structures. However, the importance of their surfaces, which may play an even more critical role, remains largely unknown. In this study, we employed advanced scanning transmission electron microscopy to investigate the atomic-scale structural and chemical responses of CeYLaHfTiZrOx HEOs to high-temperature redox environments. Our observations reveal dynamic elemental and structural reconstructions in the surface of HEOs under different gas environments, contrasting with the high stability of the bulk structure. Notably, the surfaces of HEO particles consistently exhibit abundant oxygen vacancies, regardless of the redox environment. These findings indicate that HEOs offer distinct advantages in facilitating chemical and electrochemical reactions, relying on oxygen vacancies. Our results also suggest that the exceptional performance of HEOs in energy storage applications arises from surface structural and chemical adaptability.

Identification and Manipulation of Atomic Defects in Monolayer SnSe.

SnSe, an environmental-friendly group-IV monochalcogenide semiconductor, demonstrates outstanding performance in various applications ranging from thermoelectric devices to solar energy harvesting. Its ultrathin films show promise in the fabrication of ferroelectric nonvolatile devices. However, the microscopic identification and manipulation of point defects in ultrathin SnSe single crystalline films, which significantly impact their electronic structure, have been inadequately studied. This study presents a comprehensive investigation of point defects in monolayer SnSe films grown via molecular beam epitaxy. By combining scanning tunneling microscopy (STM) characterization with first-principles calculations, we identified four types of atomic/molecular vacancies, four types of atomic substitutions, and three types of extrinsic defects. Notably, we have demonstrated the ability to convert a substitutional defect into a vacancy and to reposition an adsorbate by manipulating a single atom or molecule using an STM tip. We have also analyzed the local atomic displacement induced by the vacancies. This work provides a solid foundation for engineering the electronic structure of future SnSe-based nanodevices.

Effects of nanoparticle deformability on multiscale biotransport.

Deformability is one of the critical attributes of nanoparticle (NP) drug carriers, along with size, shape, and surface properties. It affects various aspects of NP biotransport, ranging from circulation and biodistribution to interactions with biological barriers and target cells. Recent studies report additional roles of NP deformability in biotransport processes, including protein corona formation, intracellular trafficking, and organelle distribution. This review focuses on the literature published in the past five years to update our understanding of NP deformability and its effect on NP biotransport. We introduce different methods of modulating and evaluating NP deformability and showcase recent studies that compare a series of NPs in their performance in biotransport events at all levels, highlighting the consensus and disagreement of the findings. It concludes with a perspective on the intricacy of systematic investigation of NP deformability and future opportunities to advance its control toward optimal drug delivery.